| /freebsd/sys/contrib/device-tree/Bindings/net/ |
| H A D | fsl-enetc.txt | 1 * ENETC ethernet device tree bindings
5 below device tree bindings.
9 - reg : Specifies PCIe Device Number and Function
11 to parent node bindings.
12 - compatible : Should be "fsl,enetc".
14 1. The ENETC external port is connected to a MDIO configurable phy
18 In this case, the ENETC node should include a "mdio" sub-node
19 that in turn should contain the "ethernet-phy" node describing the
20 external phy. Below properties are required, their bindings
21 already defined in Documentation/devicetree/bindings/net/ethernet.txt or
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/phy/ |
| H A D | ti,phy-am654-serdes.txt | 4 - compatible: Should be "ti,phy-am654-serdes"
5 - reg : Address and length of the register set for the device.
6 - #phy-cells: determine the number of cells that should be given in the
7 phandle while referencing this phy. Should be "2". The 1st cell
8 corresponds to the phy type (should be one of the types specified in
9 include/dt-bindings/phy/phy.h) and the 2nd cell should be the serdes
12 0 - USB3
13 1 - PCIe0 Lane0
14 2 - ICSS2 SGMII Lane0
16 0 - PCIe1 Lane0
[all …]
|
| H A D | qcom,sc8280xp-qmp-usb43dp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qm
[all...] |
| H A D | phy-rockchip-inno-usb2.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/phy-rockchip-inno-usb2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip USB2.0 phy with inno IP block
10 - Heiko Stuebner <heiko@sntech.de>
15 - rockchip,px30-usb2phy
16 - rockchip,rk3128-usb2phy
17 - rockchip,rk3228-usb2phy
18 - rockchip,rk3308-usb2phy
[all …]
|
| H A D | rockchip,inno-usb2phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/rockchip,inno-usb2phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Rockchip USB2.0 phy wit
[all...] |
| H A D | phy-lpc18xx-usb-otg.txt | 1 NXP LPC18xx/43xx internal USB OTG PHY binding
2 ---------------------------------------------
4 This file contains documentation for the internal USB OTG PHY found
8 - compatible : must be "nxp,lpc1850-usb-otg-phy"
9 - clocks : must be exactly one entry
10 See: Documentation/devicetree/bindings/clock/clock-bindings.txt
11 - #phy-cells : must be 0 for this phy
12 See: Documentation/devicetree/bindings/phy/phy-bindings.txt
14 The phy node must be a child of the creg syscon node.
18 compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
[all …]
|
| H A D | allwinner,sun9i-a80-usb-phy.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A80 USB PHY
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun9i-a80-usb-phy
25 - maxItems: 1
[all …]
|
| H A D | phy-stih41x-usb.txt | 1 STMicroelectronics STiH41x USB PHY binding
2 ------------------------------------------
4 This file contains documentation for the usb phy found in STiH415/6 SoCs from
8 - compatible : should be "st,stih416-usb-phy" or "st,stih415-usb-phy"
9 - st,syscfg : should be a phandle of the syscfg node
10 - clock-names : must contain "osc_phy"
11 - clocks : must contain an entry for each name in clock-names.
12 See: Documentation/devicetree/bindings/clock/clock-bindings.txt
13 - #phy-cells : must be 0 for this phy
14 See: Documentation/devicetree/bindings/phy/phy-bindings.txt
[all …]
|
| H A D | samsung-phy.txt | 2 -------------------------------------------------
5 - compatible : should be one of the listed compatibles:
6 - "samsung,s5pv210-mipi-video-phy"
7 - "samsung,exynos5420-mipi-video-phy"
8 - "samsung,exynos5433-mipi-video-phy"
9 - #phy-cells : from the generic phy bindings, must be 1;
12 - syscon - phandle to the PMU system controller
14 In case of exynos5433 compatible PHY:
15 - samsung,pmu-syscon - phandle to the PMU system controller
16 - samsung,disp-sysreg - phandle to the DISP system registers controller
[all …]
|
| H A D | phy-cadence-torrent.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Cadence Torrent SD0801 PHY
10 This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
12 PHY also supports multilink multiprotocol combinations including protocols
16 - Swapnil Jakhade <sjakhade@cadence.com>
17 - Yuti Amonkar <yamonkar@cadence.com>
22 - cdns,torrent-phy
[all …]
|
| H A D | fsl,imx8-pcie-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale i.MX8 SoC series PCIe PHY
10 - Richard Zhu <hongxing.zhu@nxp.com>
13 "#phy-cells":
18 - fsl,imx8mm-pcie-phy
19 - fsl,imx8mp-pcie-phy
27 clock-names:
[all …]
|
| H A D | mediatek,mt8365-csi-rx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Mediatek Sensor Interface MIPI CSI CD-PHY
11 - Julien Stephan <jstephan@baylibre.com>
12 - Andy Hsieh <andy.hsieh@mediatek.com>
15 The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
17 Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
23 - mediatek,mt8365-csi-rx
[all …]
|
| H A D | phy-hisi-inno-usb2.txt | 1 Device tree bindings for HiSilicon INNO USB2 PHY
4 - compatible: Should be one of the following strings:
5 "hisilicon,inno-usb2-phy",
6 "hisilicon,hi3798cv200-usb2-phy".
7 - re
[all...] |
| H A D | pistachio-usb-phy.txt | 1 IMG Pistachio USB PHY
5 ---------
[all...] |
| /freebsd/sys/contrib/device-tree/Bindings/mmc/ |
| H A D | arasan,sdhci.txt | 1 Device Tree Bindings for the Arasan SDHCI Controller
3 The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings.
6 [1] Documentation/devicetree/bindings/mmc/mmc.txt
7 [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
8 [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
9 [4] Documentation/devicetree/bindings/phy/phy-bindings.txt
12 - compatible: Compatibility string. One of:
13 - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY
14 - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY
15 - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
[all …]
|
| H A D | marvell,xenon-sdhci.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhc
[all...] |
| /freebsd/sys/contrib/device-tree/Bindings/pci/ |
| H A D | pci-keystone.txt | 6 Documentation/devicetree/bindings/pci/designware-pcie.txt
8 Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
9 for the details of DesignWare DT bindings. Additional properties are
12 Required Properties:-
14 compatibility: Should be "ti,keystone-pcie" for RC on Keystone2 SoC
15 Should be "ti,am654-pcie-rc" for RC on AM654x SoC
16 reg: Three register ranges as listed in the reg-names property
17 reg-names: "dbics" for the DesignWare PCIe registers, "app" for the
22 interrupt-cells: should be set to 1
24 (required if the compatible is "ti,keystone-pcie")
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/display/msm/ |
| H A D | dsi.txt | 5 - compatible:
6 * "qcom,mdss-dsi-ctrl"
7 - reg: Physical base address and length of the registers of controller
8 - reg-names: The names of register regions. The following regions are required:
10 - interrupts: The interrupt signal from the DSI block.
11 - power-domains: Should be <&mmcc MDSS_GDSC>.
12 - clocks: Phandles to device clocks.
13 - clock-names: the following clocks are required:
25 - assigned-clocks: Parents of "byte" and "pixel" for the given platform.
26 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/net/dsa/ |
| H A D | mediatek,mt7530.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Arınç ÜNAL <arinc.unal@arinc9.com>
11 - Landen Chao <Landen.Chao@mediatek.com>
12 - DENG Qingfang <dqfext@gmail.com>
13 - Sean Wang <sean.wang@mediatek.com>
14 - Daniel Golle <daniel@makrotopia.org>
17 There are three versions of MT7530, standalone, in a multi-chip module and
18 built-into a SoC.
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/media/ |
| H A D | nxp,imx-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
10 - Rui Miguel Silva <rmfrfs@gmail.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
13 description: |-
14 The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
19 While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
[all …]
|
| H A D | nxp,imx7-mipi-csi2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
10 - Rui Miguel Silva <rmfrfs@gmail.com>
11 - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
13 description: |-
14 The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
19 While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/usb/ |
| H A D | dwc3-xilinx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
5 $schema: http://devicetree.org/meta-schema
[all...] |
| H A D | usb-nop-xceiv.txt | 1 USB NOP PHY
4 - compatible: should be usb-nop-xceiv
5 - #phy-cells: Must be 0
8 - clocks: phandle to the PHY clock. Use as per Documentation/devicetree
9 /bindings/clock/clock-bindings.txt
10 This property is required if clock-frequency is specified.
12 - clock-names: Should be "main_clk"
14 - clock-frequency: the clock frequency (in Hz) that the PHY clock must
17 - vcc-supply: phandle to the regulator that provides power to the PHY.
19 - reset-gpios: Should specify the GPIO for reset.
[all …]
|
| H A D | exynos-usb.txt | 8 - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
10 - reg: physical base address of the controller and length of memory mapped
12 - interrupts: interrupt number to the cpu.
13 - clocks: from common clock binding: handle to usb clock.
14 - clock-names: from common clock binding: Shall be "usbhost".
15 - phys: from the *Generic PHY* bindings; array specifying phy(s) used
17 - phy-names: from the *Generic PHY* bindings; array of the names for
18 each phy for the root ports, must be a subset of the following:
22 - samsung,vbus-gpio: if present, specifies the GPIO that
28 compatible = "samsung,exynos4210-ehci";
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ |
| H A D | qcom,dispcc-sm8x50.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jonathan Marek <jonathan@marek.ca>
17 include/dt-bindings/clock/qcom,dispcc-sm8150.h
18 include/dt-bindings/clock/qcom,dispcc-sm8250.h
19 include/dt-bindings/clock/qcom,dispcc-sm8350.h
24 - qcom,sc8180x-dispcc
25 - qcom,sm8150-dispcc
[all …]
|