/freebsd/sys/contrib/device-tree/Bindings/sound/ |
H A D | cirrus,cs35l41.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - david.rhodes@cirrus.com 19 - cirrus,cs35l40 20 - cirrus,cs35l41 28 '#sound-dai-cells': 33 reset-gpios: 36 VA-supply: 39 VP-supply: [all …]
|
H A D | cs35l34.txt | 5 - compatible : "cirrus,cs35l34" 7 - reg : the I2C address of the device for I2C. 9 - VA-supply, VP-supply : power supplies for the device, 13 - cirrus,boost-vtge-millivolt : Boost Voltage Value. Configures the boost 14 converter's output voltage in mV. The range is from VP to 8V with 17 - cirrus,boost-nanohenry: Inductor value for boost converter. The value is 22 - reset-gpios: GPIO used to reset the amplifier. 24 - interrupts : IRQ line info CS35L34. 25 (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt 26 for further information relating to interrupt properties) [all …]
|
H A D | cs35l36.txt | 5 - compatible : "cirrus,cs35l36" 7 - reg : the I2C address of the device for I2C 9 - VA-supply, VP-supply : power supplies for the device, 13 - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost 14 converter's output voltage in mV. The range is from 2550mV to 12000mV with 18 - cirru [all...] |
/freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | sdm660.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 13 compatible = "qcom,adreno-512.0", "qcom,adreno"; 14 operating-points-v2 = <&gpu_sdm660_opp_table>; 16 gpu_sdm660_opp_table: opp-table { 17 compatible = "operating-points-v2"; 21 * Though it cannot be used for now due to interconnect 23 * at the same opp-level 25 opp-750000000 { 26 opp-hz = /bits/ 64 <750000000>; 27 opp-level = <RPM_SMD_LEVEL_TURBO>; [all …]
|
H A D | sm6350.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 7 #include <dt-bindings/clock/qcom,dispcc-sm6350.h> 8 #include <dt-bindings/clock/qcom,gcc-sm6350.h> 9 #include <dt-bindings/clock/qcom,gpucc-sm6350.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/clock/qcom,sm6350-camcc.h> 12 #include <dt-bindings/dma/qcom-gpi.h> 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interconnect/qcom,icc.h> 15 #include <dt-bindings/interconnect/qcom,osm-l3.h> [all …]
|
H A D | msm8996.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-msm8996.h> 8 #include <dt-bindings/clock/qcom,mmcc-msm8996.h> 9 #include <dt-bindings/clock/qcom,rpmcc.h> 10 #include <dt-bindings/interconnect/qcom,msm8996.h> 11 #include <dt-bindings/interconnect/qcom,msm8996-cbf.h> 12 #include <dt-bindings/firmware/qcom,scm.h> 13 #include <dt-bindings/gpio/gpio.h> [all …]
|
H A D | sdm845.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/clock/qcom,camcc-sdm845.h> 9 #include <dt-bindings/clock/qcom,dispcc-sdm845.h> 10 #include <dt-bindings/clock/qcom,gcc-sdm845.h> 11 #include <dt-bindings/clock/qcom,gpucc-sdm845.h> 12 #include <dt-bindings/clock/qcom,lpass-sdm845.h> 13 #include <dt-bindings/clock/qcom,rpmh.h> 14 #include <dt-bindings/clock/qcom,videocc-sdm845.h> 15 #include <dt-bindings/dma/qcom-gpi.h> 16 #include <dt-bindings/firmware/qcom,scm.h> [all …]
|
H A D | sm8250.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,dispcc-sm8250.h> 8 #include <dt-bindings/clock/qcom,gcc-sm8250.h> 9 #include <dt-bindings/clock/qcom,gpucc-sm8250.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/dma/qcom-gpi.h> 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/interconnect/qcom,osm-l3.h> 14 #include <dt-bindings/interconnect/qcom,sm8250.h> [all …]
|
H A D | sc7180.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 5 * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. 8 #include <dt-bindings/clock/qcom,dispcc-sc7180.h> 9 #include <dt-bindings/clock/qcom,gcc-sc7180.h> 10 #include <dt-bindings/clock/qcom,gpucc-sc7180.h> 11 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h> 12 #include <dt-bindings/clock/qcom,rpmh.h> 13 #include <dt-bindings/clock/qcom,videocc-sc7180.h> 14 #include <dt-bindings/firmware/qcom,scm.h> 15 #include <dt-bindings/interconnect/qcom,icc.h> [all …]
|
H A D | sc8280xp.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 7 #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h> 8 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> 9 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/clock/qcom,sc8280xp-camcc.h> 12 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> 13 #include <dt-bindings/interconnect/qcom,osm-l3.h> 14 #include <dt-bindings/interconnect/qcom,sc8280xp.h> 15 #include <dt-bindings/interrupt-controller/arm-gic.h> [all …]
|
H A D | sdm670.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 9 #include <dt-bindings/clock/qcom,dispcc-sdm845.h> 10 #include <dt-bindings/clock/qcom,gcc-sdm845.h> 11 #include <dt-bindings/clock/qcom,rpmh.h> 12 #include <dt-bindings/dma/qcom-gpi.h> 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interconnect/qcom,osm-l3.h> 15 #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> 16 #include <dt-bindings/interrupt-controller/arm-gic.h> 17 #include <dt-bindings/phy/phy-qcom-qusb2.h> [all …]
|
H A D | sc7280.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 5 * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. 7 #include <dt-bindings/clock/qcom,camcc-sc7280.h> 8 #include <dt-bindings/clock/qcom,dispcc-sc7280.h> 9 #include <dt-bindings/clock/qcom,gcc-sc7280.h> 10 #include <dt-bindings/clock/qcom,gpucc-sc7280.h> 11 #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> 12 #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> 13 #include <dt-bindings/clock/qcom,rpmh.h> 14 #include <dt-bindings/clock/qcom,videocc-sc7280.h> [all …]
|
H A D | sm8150.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. 7 #include <dt-bindings/dma/qcom-gpi.h> 8 #include <dt-bindings/firmware/qcom,scm.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/phy/phy-qcom-qmp.h> 11 #include <dt-bindings/power/qcom-rpmpd.h> 12 #include <dt-bindings/soc/qcom,rpmh-rsc.h> 13 #include <dt-bindings/clock/qcom,rpmh.h> 14 #include <dt-bindings/clock/qcom,dispcc-sm8150.h> [all …]
|
H A D | qcm2290.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 8 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> 9 #include <dt-bindings/clock/qcom,gcc-qcm2290.h> 10 #include <dt-bindings/clock/qcom,qcm2290-gpucc.h> 11 #include <dt-bindings/clock/qcom,rpmcc.h> 12 #include <dt-bindings/dma/qcom-gpi.h> 13 #include <dt-bindings/firmware/qcom,scm.h> 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/interrupt-controller/arm-gic.h> 16 #include <dt-bindings/interconnect/qcom,qcm2290.h> [all …]
|
H A D | sm6375.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 6 #include <dt-bindings/clock/qcom,rpmcc.h> 7 #include <dt-bindings/clock/qcom,sm6375-gcc.h> 8 #include <dt-bindings/clock/qcom,sm6375-gpucc.h> 9 #include <dt-bindings/dma/qcom-gpi.h> 10 #include <dt-bindings/firmware/qcom,scm.h> 11 #include <dt-bindings/interconnect/qcom,osm-l3.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/mailbox/qcom-ipcc.h> 14 #include <dt-bindings/power/qcom-rpmpd.h> [all …]
|
H A D | sc8180x.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause 3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. 4 * Copyright (c) 2020-2023, Linaro Limited 7 #include <dt-bindings/clock/qcom,dispcc-sm8250.h> 8 #include <dt-bindings/clock/qcom,gcc-sc8180x.h> 9 #include <dt-bindings/clock/qcom,gpucc-sm8150.h> 10 #include <dt-bindings/clock/qcom,rpmh.h> 11 #include <dt-bindings/interconnect/qcom,icc.h> 12 #include <dt-bindings/interconnect/qcom,osm-l3.h> 13 #include <dt-bindings/interconnect/qcom,sc8180x.h> [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/phy/ |
H A D | transmit-amplitude.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 Binding describing the peak-to-peak transmit amplitude for common PHYs 14 - Marek Behún <kabel@kernel.org> 17 tx-p2p-microvolt: 19 Transmit amplitude voltages in microvolts, peak-to-peak. If this property 21 'tx-p2p-microvolt-names' property must be provided and contain 24 tx-p2p-microvolt-names: [all …]
|
/freebsd/share/man/man4/ |
H A D | ng_car.4 | 15 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 39 .Bl -bullet -compact 45 RED-like rate limit algorithm used by Cisco, 51 .Bl -tag -width ".Va upper" 53 Hook leading to upper layer protocols. 55 Hook leading to lower layer protocols. 74 .Bl -tag -width foo 83 Committed burst packets are counted as green, peak burst packets are counted 86 Peak burst getting refilled with PIR (Peak Information Rate) speed at the [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/nvidia/ |
H A D | tegra234.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 #include <dt-bindings/clock/tegra234-clock.h> 4 #include <dt-bindings/gpio/tegra234-gpio.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/mailbox/tegra186-hsp.h> 7 #include <dt-bindings/memory/tegra234-mc.h> 8 #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> 9 #include <dt-bindings/power/tegra234-powergate.h> 10 #include <dt-bindings/reset/tegra234-reset.h> 11 #include <dt-bindings/thermal/tegra234-bpmp-thermal.h> [all …]
|
/freebsd/sys/net/altq/ |
H A D | altq_cdnr.h | 1 /*- 2 * Copyright (C) 1999-2002 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 41 #define TCETYPE_TRTCM 4 /* (two-rate) three color marker */ 42 #define TCETYPE_TSWTCM 5 /* time sliding window 3-color maker */ 92 /* token-bucket meter operations */ 115 /* two-rate three-color marker operations */ 119 struct tb_profile peak_profile; /* profile for peak tb */ 123 int coloraware; /* color-aware/color-blind */ [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/arm/tegra/ |
H A D | nvidia,tegra30-actmon.txt | 4 components in the system. This information can be used to derive the rate at 5 which the external memory needs to be clocked in order to serve all requests 9 - compatible: should be "nvidia,tegra<chip>-actmon" 10 - reg: offset and length of the register set for the device 11 - interrupts: standard interrupt property 12 - clocks: Must contain a phandle and clock specifier pair for each entry in 13 clock-names. See ../../clock/clock-bindings.txt for details. 14 - clock-names: Must include the following entries: 15 - actmon 16 - emc [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/display/msm/ |
H A D | gpu.txt | 4 - compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or 5 "amd,imageon-XYZ.W", "amd,imageon" 6 for example: "qcom,adreno-306.0", "qcom,adreno" 7 Note that you need to list the less specific "qcom,adreno" (since this 8 is what the device is matched on), in addition to the more specific 9 with the chip-id. 11 - reg: Physical base address and length of the controller's registers. 12 - interrupts: The interrupt signal from the gpu. 13 - clocks: device clocks (if applicable) 14 See ../clocks/clock-bindings.txt for details. [all …]
|
H A D | gpu.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Rob Clark <robdclark@gmail.com> 14 # as a work-around: 20 - qcom,adreno 21 - amd,imageon 23 - compatible 28 - description: | 29 The driver is parsing the compat string for Adreno to [all …]
|
/freebsd/sys/dev/sound/pcm/ |
H A D | channel_if.m | 1 #- 4 # Copyright (c) 2005-2009 Ariff Abdullah <ariff@FreeBSD.org> 5 # Portions Copyright (c) Ryan Beasley <ryan.beasley@gmail.com> - GSoC 2006 19 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 71 return -1; 172 * @brief Retrieve channel peak values 174 * This function is intended to obtain peak volume values for samples 175 * played/recorded on a channel. Values are on a linear scale from 0 to 180 * operation should return EINVAL. However, we may opt to provide [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/opp/ |
H A D | opp-v2-base.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/opp/opp-v2-base.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Viresh Kumar <viresh.kumar@linaro.org> 13 Devices work at voltage-current-frequency combinations and some implementations 19 This describes the OPPs belonging to a device. 25 pattern: '^opp-table(-[a-z0-9]+)?$' 27 opp-shared: 36 '^opp(-?[0-9]+)*$': [all …]
|