/linux/Documentation/driver-api/mmc/ |
H A D | mmc-test.rst | 70 This will list the MMC devices, such as ``mmc0:0001``. 76 echo 'mmc0:0001' > /sys/bus/mmc/drivers/mmcblk/unbind 82 echo 'mmc0:0001' > /sys/bus/mmc/drivers/mmc_test/bind 88 mmc_test mmc0:0001: Card claimed for testing. 94 …ou can interact with the following debugfs entries located in ``/sys/kernel/debug/mmc0/mmc0:0001``: 102 echo <test_number> > /sys/kernel/debug/mmc0/mmc0:0001/test 108 dmesg | grep mmc0 116 echo 4 > /sys/kernel/debug/mmc0/mmc0:0001/test 122 dmesg | grep mmc0 130 cat /sys/kernel/debug/mmc0/mmc0:0001/testlist [all …]
|
/linux/arch/mips/boot/dts/ingenic/ |
H A D | cu1000-neo.dts | 30 linux,default-trigger = "mmc0"; 205 function = "mmc0"; 206 groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
|
H A D | cu1830-neo.dts | 30 linux,default-trigger = "mmc0"; 208 function = "mmc0"; 209 groups = "mmc0-1bit", "mmc0-4bit";
|
H A D | gcw0.dts | 400 pins_mmc0: mmc0 { 401 function = "mmc0"; 402 groups = "mmc0-1bit-a", "mmc0-4bit-a"; 509 &mmc0 {
|
H A D | ci20.dts | 193 &mmc0 { 603 pins_mmc0: mmc0 { 604 function = "mmc0"; 605 groups = "mmc0-1bit-e", "mmc0-4bit-e";
|
/linux/arch/arm/boot/dts/microchip/ |
H A D | at91-sama5d3_ksz9477_evb.dts | 24 reg_vcc_mmc0: regulator-mmc0 { 28 regulator-name = "mmc0-vcc"; 64 &mmc0 { 193 pinctrl_mmc0_cd: mmc0-cd { 197 pinctrl_mcc0_vcc: mmc0-vcc {
|
H A D | at91-sam9_l9260.dts | 46 mmc0: mmc@fffa8000 { label 91 mmc0 { 92 pinctrl_board_mmc0: mmc0-board {
|
H A D | at91-cosino.dtsi | 110 &mmc0 { 126 mmc0 { 127 pinctrl_board_mmc0: mmc0-board {
|
H A D | at91sam9n12ek.dts | 76 mmc0: mmc@f0008000 { label 90 mmc0 { 91 pinctrl_board_mmc0: mmc0-board { 213 linux,default-trigger = "mmc0";
|
H A D | at91sam9x5ek.dtsi | 56 &mmc0 { 104 mmc0 { 105 pinctrl_board_mmc0: mmc0-board {
|
H A D | at91-sama5d3_eds.dts | 76 regulator-name = "mmc0-card-supply"; 174 &mmc0 { 206 pinctrl_mmc0_cd: mmc0-cd { 251 pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
|
H A D | at91sam9m10g45ek.dts | 97 mmc0: mmc@fff80000 { label 143 mmc0 { 144 pinctrl_board_mmc0: mmc0-board { 342 linux,default-trigger = "mmc0";
|
H A D | at91sam9rlek.dts | 139 mmc0: mmc@fffa4000 { label 203 mmc0 { 204 pinctrl_board_mmc0: mmc0-board {
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | fsl,mxs-pinctrl.txt | 34 particular function, like SSP0 functioning as mmc0-8bit. That said, the 85 mmc0_8bit_pins_a: mmc0-8bit@0 { 117 In this example, group node mmc0-8bit defines a group of pins for mxs SSP0 121 node mmc0-8bit defines. Only the configuration properties to be adjusted need
|
/linux/arch/arm/boot/dts/actions/ |
H A D | owl-s500-roseapplepi.dts | 17 mmc0 = &mmc0; 205 mmc0_pins: mmc0-pins { 252 &mmc0 {
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am572x-idk-common.dtsi | 86 mmc0-led { 87 label = "status1:blue:mmc0"; 90 linux,default-trigger = "mmc0";
|
H A D | am571x-idk.dts | 85 mmc0-led { 86 label = "status1:blue:mmc0"; 89 linux,default-trigger = "mmc0";
|
/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos54xx-odroidxu-leds.dtsi | 19 label = "green:mmc0"; 29 linux,default-trigger = "mmc0";
|
/linux/arch/arm/boot/dts/allwinner/ |
H A D | sun5i-a13-pocketbook-614-plus.dts | 54 reg_3v3_mmc0: regulator-mmc0 { 56 regulator-name = "vdd-mmc0"; 134 &mmc0 {
|
H A D | sun5i-a13-pocketbook-touch-lux-3.dts | 95 reg_3v3_mmc0: regulator-mmc0 { 97 regulator-name = "vdd-mmc0"; 158 &mmc0 {
|
/linux/Documentation/devicetree/bindings/clock/ |
H A D | allwinner,sun4i-a10-mmc-clk.yaml | 72 clock-output-names = "mmc0", 83 clock-output-names = "mmc0", "mmc0_output",
|
/linux/Documentation/devicetree/bindings/mmc/ |
H A D | atmel-hsmci.txt | 24 mmc0: mmc@f0008000 { 57 mmc0: mmc@f0008000 {
|
/linux/arch/arm/boot/dts/intel/socfpga/ |
H A D | socfpga_cyclone5_chameleon96.dts | 46 linux,default-trigger = "mmc0"; 94 &mmc0 {
|
/linux/drivers/pinctrl/sunxi/ |
H A D | pinctrl-suniv-f1c100s.c | 354 SUNXI_FUNCTION(0x2, "mmc0"), /* D1 */ 361 SUNXI_FUNCTION(0x2, "mmc0"), /* D0 */ 367 SUNXI_FUNCTION(0x2, "mmc0"), /* CLK */ 373 SUNXI_FUNCTION(0x2, "mmc0"), /* CMD */ 379 SUNXI_FUNCTION(0x2, "mmc0"), /* D3 */ 385 SUNXI_FUNCTION(0x2, "mmc0"), /* D2 */
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am642-sr-som.dtsi | 17 mmc0 = &sdhci0; 167 vdd_mmc0: regulator-vdd-mmc0 { 169 regulator-name = "vdd-mmc0"; 358 * main_mmc0_default_pins: main-mmc0-default-pins 548 /* mmc0 pins have no padconfig */ 557 * However MMC0 (unlike MMC1) does not integrate an LDO.
|