/freebsd/sys/contrib/device-tree/Bindings/watchdog/ |
H A D | atmel-wdt.txt | 3 ** at91sam9-wdt 6 - compatible: must be "atmel,at91sam9260-wdt". 7 - reg: physical base address of the controller and length of memory mapped 9 - clocks: phandle to input clock. 12 - timeout-sec: contains the watchdog timeout in seconds. 13 - interrupts : Should contain WDT interrupt. 14 - atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in 17 - atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in 18 seconds. This value must be smaller than the max-heartbeat-sec value. 20 - atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog [all …]
|
H A D | atmel,at91sam9-wdt.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Eugen Hristev <eugen.hristev@microchip.com> 15 const: atmel,at91sam9260-wdt 26 atmel,max-heartbeat-sec: 28 Should contain the maximum heartbeat value in seconds. This value 32 atmel,min-heartbeat-sec: 34 Should contain the minimum heartbeat value in seconds. This value [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/microchip/ |
H A D | at91-kizbox.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board 5 * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> 6 * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> 8 /dts-v1/; 10 #include <dt-bindings/pwm/pwm.h> 18 stdout-path = &dbgu; 27 clock-frequency = <18432000>; 31 gpio-keys { 32 compatible = "gpio-keys"; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/st/ |
H A D | stm32mp157c-odyssey-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 6 /dts-v1/; 10 #include "stm32mp15-pinctrl.dtsi" 11 #include "stm32mp15xxac-pinctrl.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-binding [all...] |
H A D | stm32mp157c-ed1.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 6 /dts-v1/; 10 #include "stm32mp15-pinctrl.dtsi" 11 #include "stm32mp15xxaa-pinctrl.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/leds/common.h> 14 #include <dt-bindings/mfd/st,stpmic1.h> 18 compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; 25 stdout-path = "serial0:115200n8"; [all …]
|
H A D | stm32mp15xx-dkx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2019 - All Rights Reserved 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/mfd/st,stpmic1.h> 22 reserved-memory { 23 #address-cell [all...] |
H A D | stm32mp157c-emstamp-argon.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 9 #include "stm32mp15-pinctrl.dtsi" 10 #include "stm32mp15xxac-pinctrl.dtsi" 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/mfd/st,stpmic1.h> 23 stdout-path = "serial0:115200n8"; 31 reserved-memory { 32 #address-cell [all...] |
H A D | stm32mp157a-stinger96.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 9 #include "stm32mp15-pinctrl.dtsi" 10 #include "stm32mp15xxac-pinctrl.dtsi" 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/mfd/st,stpmic1.h> 24 stdout-path = "serial1:115200n8"; 33 compatible = "gpio-led [all...] |
H A D | stm32429i-eval.dts | 2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> 4 * This file is dual-licensed: you can use it either under the terms 22 * MA 02110-1301 USA 48 /dts-v1/; 50 #include "stm32f429-pinctrl.dtsi" 51 #include <dt-bindings/input/input.h> 52 #include <dt-bindings/gpio/gpio.h> 53 #include <dt-bindings/media/video-interfaces.h> 56 model = "STMicroelectronics STM32429i-EVA [all...] |
H A D | stm32mp157c-phycore-stm32mp15-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) 2022-2023 Steffen Trumtrar <kernel@pengutronix.de> 4 * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-binding [all...] |
H A D | stm32mp15xc-lxa-tac.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) 3 * Copyright (C) 2020 STMicroelectronics - All Rights Reserved 9 #include "stm32mp15xx-osd32.dtsi" 10 #include "stm32mp15xxac-pinctrl.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/input/input.h> 14 #include <dt-bindings/leds/common.h> 15 #include <dt-bindings/pwm/pwm.h> 28 stdout-path = &uart4; 31 led-controller-0 { [all …]
|
H A D | stm32mp135f-dk.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/input/input.h> 11 #include <dt-bindings/leds/common.h> 12 #include <dt-bindings/regulator/st,stm32mp13-regulator.h> 15 #include "stm32mp13-pinctrl.dtsi" 18 model = "STMicroelectronics STM32MP135F-DK Discovery Board"; 19 compatible = "st,stm32mp135f-dk", "st,stm32mp135"; [all …]
|
/freebsd/sys/powerpc/powernv/ |
H A D | opal_dev.c | 1 /*- 146 if (!ofw_bus_is_compatible(dev, "ibm,opal-v3")) in opaldev_probe() 154 if (OF_hasprop(ofw_bus_get_node(dev), "opal-interrupts")) { in opaldev_probe() 155 iparent = OF_finddevice("/interrupt-controller@0"); in opaldev_probe() 159 "opal-interrupts") / sizeof(*irqs); in opaldev_probe() 161 OF_getencprop(ofw_bus_get_node(dev), "opal-interrupts", irqs, in opaldev_probe() 199 OF_getencprop(ofw_bus_get_node(dev), "ibm,heartbeat-ms", in opaldev_attach() 208 OF_getencprop(ofw_bus_get_node(dev), "opal-msg-async-num", in opaldev_attach() 222 dinfo->obd_name); in opaldev_attach() 289 ct.sec = bcd2bin((hmsm & 0x0000ff0000000000) >> 40); in opal_gettime() [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx6qdl-emcon.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/pwm/pwm.h> 8 #include <dt-bindings/input/input.h> 12 model = "emtrion SoM emCON-MX6"; 13 compatible = "emtrion,emcon-mx6"; 23 stdout-path = &uart1; 31 gpio-keys { 32 compatible = "gpio-keys"; 33 pinctrl-names = "default"; [all …]
|
H A D | imx6q-bosch-acc.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Support for the i.MX6-based Bosch ACC board. 8 * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> 12 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/leds/common.h> 20 compatible = "bosch,imx6q-acc", "fsl,imx6q"; 37 backlight_lvds: backlight-lvds { 38 compatible = "pwm-backlight"; 40 brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/renesas/ |
H A D | beacon-renesom-baseboard.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/clock/versaclock.h> 11 backlight_lvds: backlight-lvds { 12 compatible = "pwm-backlight"; 13 power-supply = <®_lcd>; 14 enable-gpio [all...] |
/freebsd/sys/dev/iwi/ |
H A D | if_iwi.c | 1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 6 * Copyright (c) 2005-2006 Sam Leffler, Errno Consulting 33 /*- 266 for (ident = iwi_ident_table; ident->name != NULL; ident++) { in iwi_probe() 267 if (pci_get_vendor(dev) == ident->vendor && in iwi_probe() 268 pci_get_device(dev) == ident->device) { in iwi_probe() 269 device_set_desc(dev, ident->name); in iwi_probe() 280 struct ieee80211com *ic = &sc->sc_ic; in iwi_attach() 284 sc->sc_dev = dev; in iwi_attach() [all …]
|
/freebsd/sys/dev/qlnx/qlnxe/ |
H A D | reg_addr.h | 2 * Copyright (c) 2017-2018 Cavium, Inc. 78 …- For ending "endless completion". 0 - When receiving a completion timeout while receiving a compl… 79 … DataWidth:0x4 // 0 - TXCPL sync fifo pop underflow 1 - TXR sync fifo pop underflow 2 - TXW hea… 80 …s:R DataWidth:0x6 // 0 - RX target read and config sync fifo push overflow 1 - RX header syn… 81 …ataWidth:0x14 // 4:0 - TXCPL sync fifo pop status 9:5 - TXR sync fifo pop status 14:10 - TXW hea… 88 …ffff<<0) // Vendor ID. PCI-SIG assigned Manufacturer Identifier. Note: The access attributes of … 90 …ce Identifier. Note: The access attributes of this field are as follows: - Dbi: if (DBI_RO_WR_E… 116 … (0x1<<9) // Fast back-to-back transaction ena… 128 … (0x1<<23) // Fast back-to-back capable. Not ap… 145 …l has_io_bar=0. Note: The access attributes of this field are as follows: - Dbi: if (DBI_RO_WR_E… [all …]
|
/freebsd/sys/dev/bnxt/bnxt_en/ |
H A D | hsi_struct_def.h | 1 /*- 34 * Copyright(c) 2001-2024, Broadcom. All rights reserved. The 71 * * 0x0-0xFFF8 - The function ID 72 * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors 73 * * 0xFFFD - Reserved for user-space HWRM interface 74 * * 0xFFFF - HWRM 122 /* Engine CKV - The Alias key EC curve and ECC public key information. */ 124 /* Engine CKV - Initialization vector. */ 126 /* Engine CKV - Authentication tag. */ 128 /* Engine CKV - The encrypted data. */ [all …]
|
/freebsd/share/dict/ |
H A D | web2 | 83148 heartbeat 99810 Jean-Christophe 99811 Jean-Pierre 116562 min 176652 sec
|