| /linux/Documentation/devicetree/bindings/regulator/ |
| H A D | ltc3589.txt | 9 ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
16 Required properties (not on ldo3, ldo4):
23 have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
88 ldo3_reg: ldo3 {
|
| H A D | max8925-regulator.txt | 10 - LDO3 for LDO LDO3
|
| H A D | pv88060.txt | 11 BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
49 LDO3 {
50 regulator-name = "ldo3";
|
| H A D | as3722-regulator.txt | 17 vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
40 by LDO3.
|
| H A D | tps65217.txt | 18 tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
64 ldo3_reg: ldo3 {
|
| H A D | dlg,slg51000.yaml | 30 Input supply for ldo3, required if regulator is enabled
101 ldo3 {
|
| H A D | tps6586x.txt | 20 - vinldo23-supply: The input supply for the LDO2 and LDO3
100 ldo3_reg: ldo3 {
|
| /linux/arch/arm64/boot/dts/hisilicon/ |
| H A D | hikey970-pmic.dtsi | 27 ldo3: ldo3 { /* HDMI */ label
28 regulator-name = "ldo3";
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra72-evm-tps65917.dtsi | 29 ldo3-in-supply = <&vsys_3v3>;
96 ldo3_reg: ldo3 {
98 regulator-name = "ldo3";
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| H A D | x-powers,axp152.yaml | 213 LDO3 power supply node, if present.
288 Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
293 Only valid for the LDO3 regulator.
404 reg_ldo3: ldo3 {
405 regulator-name = "ldo3";
|
| H A D | wm831x.txt | 45 ldo3 : LDO3
|
| H A D | samsung,s2dos05.yaml | 74 ldo3 {
79 regulator-name = "ldo3";
|
| H A D | rohm,bd71828-pmic.yaml | 170 ldo3: LDO3 {
171 regulator-name = "ldo3";
|
| H A D | hisilicon,hi6421-spmi-pmic.yaml | 78 ldo3 {
79 regulator-name = "ldo3";
|
| H A D | rohm,bd71847-pmic.yaml | 206 ldo3: LDO3 {
207 regulator-name = "ldo3";
|
| H A D | as3722.txt | 98 vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
123 by LDO3.
|
| /linux/drivers/regulator/ |
| H A D | max8893.c | 71 .name = "LDO3",
72 .supply_name = "in-ldo3",
73 .of_match = of_match_ptr("ldo3"),
|
| H A D | ltc3676.c | 154 /* LDO3 has a fixed output */ in ltc3676_of_parse_cb()
188 /* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
231 LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
315 descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */ in ltc3676_regulator_probe()
|
| H A D | rn5t618-regulator.c | 52 REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
68 REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
86 REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 900000, 3500000, 25000),
|
| H A D | tps65217-regulator.c | 143 /* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
199 TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, "ldo3", tps65217_pmic_ops,
|
| /linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mn-ddr3l-evk.dts | 89 ldo3: LDO3 { label
|
| H A D | imx8mm-evkb.dts | 103 ldo3_reg: LDO3 {
104 regulator-name = "LDO3";
|
| H A D | imx8mn-evk.dts | 102 ldo3: LDO3 { label
|
| H A D | imx8mn-ddr4-evk.dts | 135 ldo3_reg: LDO3 {
136 regulator-name = "ldo3";
|
| /linux/arch/arm/boot/dts/allwinner/ |
| H A D | axp209.dtsi | 108 reg_ldo3: ldo3 {
109 regulator-name = "ldo3";
|