| /freebsd/sys/dev/isci/scil/ |
| H A D | sci_status.h | 76 * This member indicates successful completion.
81 * This value indicates that the calling method completed successfully,
90 * This Value indicates that the SCU hardware returned an early response
98 * This member indicates that the object for which a state change is
104 * This member indicates interrupt coalescence timer may cause SAS
111 * This field indicates a sequence of action is not completed yet. Mostly,
117 * This member indicates that there was a general failure.
122 * This member indicates that the SCI implementation is unable to complete
129 * This member indicates the calling function failed, because the state
135 * This member indicates the calling function failed, because there is
[all …]
|
| H A D | sati_types.h | 74 * This indicates that the translation was supported and occurred
80 * This indicates that the translation was supported and occurred
82 * Additionally, this indicates the translation actually already
89 * This indicates that the translation was supported, occurred without
103 * This indicates that translator sequence has finished some specific
109 * This indicates a general failure has occurred for which no further
115 * This indicates that the result of the IO request indicates a
122 * This status indicates that the supplied sequence type doesn't map
128 * This status indicates that the supplied sequence state doesn't match
|
| /freebsd/sys/contrib/dev/athk/ath10k/ |
| H A D | rx_desc.h | 53 * Indicates the first MSDU of the PPDU. If both first_mpdu
61 * Indicates the last MSDU of the last MPDU of the PPDU. The
71 * Indicates no matching entries within the max search
75 * Indicates an unsuccessful search for the peer index due to
87 * Set if frame type indicates either null data or QoS null
111 * Indicates that this is an 802.11 fragment frame. This is
121 * Indicates that this status has a corresponding MSDU that
134 * Indicates that the MSDU length from the 802.3 encapsulated
138 * Indicates that the computed checksum (tcp_udp_chksum) did
142 * Indicates that the computed checksum did not match the
[all …]
|
| /freebsd/sys/contrib/dev/athk/ath11k/ |
| H A D | rx_desc.h | 145 * Field indicates what the reason was that this mpdu frame
158 * Indicates the first MSDU of the PPDU. If both first_mpdu
172 * Only valid when first_msdu is set. Indicates no AST matching
176 * Only valid when first_msdu is set. Indicates an unsuccessful
188 * Set if frame type indicates either null data or QoS null
213 * Indicates that this is an 802.11 fragment frame. This is
223 * Indicates that this status has a corresponding MSDU that
236 * Indicates that the MSDU length from the 802.3 encapsulated
240 * Indicates that the computed checksum (tcp_udp_chksum) did
244 * Indicates that the computed checksum did not match the
[all …]
|
| /freebsd/sys/contrib/dev/athk/ath12k/ |
| H A D | rx_desc.h | 209 * Indicates to RXDMA to ignore the REO_destination_indication
237 * Indicates the MPDU queue ID to which this MPDU link
241 * Indicates that a delimiter FCS error was found in between the
248 * Indicates that the first delimiter had a FCS failure.
272 * Indicates type of decrypt cipher used (as defined in the
286 * This number indicates which one out of the 8 BSSID register
298 * Field indicates what the reason was that this mpdu frame
334 * This field indicates the index of the AST entry corresponding
337 * A value of 0xFFFF indicates an invalid AST index, meaning
343 * This field indicates a unique peer identifier. It is set
[all …]
|
| /freebsd/contrib/llvm-project/lldb/include/lldb/Core/ |
| H A D | Declaration.h | 118 /// Non-zero indicates a valid line number, zero indicates no
125 /// Non-zero indicates a valid column number, zero indicates no
166 /// Non-zero indicates a valid line number, zero indicates no
173 /// Non-zero indicates a valid column number, zero indicates no
181 /// Non-zero values indicates a valid line number, zero indicates no line
184 /// Non-zero values indicates a valid column number, zero indicates no column
|
| /freebsd/sys/contrib/device-tree/Bindings/leds/ |
| H A D | common.yaml | 90 # LED indicates disk activity
92 # LED indicates disk read activity
94 # LED indicates disk write activity
101 # LED indicates mic mute state
103 # LED indicates audio mute state
105 # LED indicates bluetooth power state
107 # LED indicates camera flash state
111 # LED indicates MTD memory activity
113 # LED indicates NAND memory activity (deprecated),
116 # LED indicates network activity
[all …]
|
| /freebsd/contrib/openbsm/bin/auditd/ |
| H A D | audit_warn.c | 72 * Indicates that the hard limit for all filesystems has been exceeded.
86 * Indicates that the soft limit for all filesystems has been exceeded.
100 * Indicates that someone other than the audit daemon turned off auditing.
132 * Indicates that the audit deammn is already running
146 * Indicates that there is a problem getting the directory from
165 * Indicates that the hard limit for this file has been exceeded.
180 * Indicates that auditing could not be started.
209 * Indicates that the soft limit for this file has been exceeded.
224 * Indicates that the temporary audit file already exists indicating a fatal
239 * Indicates that this trail file has expired and was removed.
|
| /freebsd/sys/contrib/device-tree/Bindings/clock/ |
| H A D | stericsson,u8500-clks.yaml | 39 management unit) clocks. The cell indicates which PRCMU clock in the
51 reset and clock controller) peripheral clocks. The first cell indicates
53 5, 6. The second cell indicates which clock inside the PRCC block it
65 and clock controller) kernel clocks. The first cell indicates which PRCC
67 second cell indicates which clock inside the PRCC block it wants, possible
79 PRCC (peripheral reset and clock controller). The first cell indicates
81 5 and 6. The second cell indicates which reset line inside the PRCC block
121 The first cell indicates which output clock we are using,
123 The second cell indicates which clock we want to use as source,
|
| /freebsd/sys/contrib/device-tree/Bindings/firmware/ |
| H A D | nxp,imx95-scmi-pinctrl.yaml | 38 "mux_reg" indicates the offset of mux register.
40 "conf_reg" indicates the offset of pad configuration register.
42 "input_reg" indicates the offset of select input register.
44 "mux_val" indicates the mux value to be applied.
46 "input_val" indicates the select input value to be applied.
48 "pad_setting" indicates the pad configuration value to be applied.
|
| /freebsd/sys/dev/qlnx/qlnxe/ |
| H A D | ecore_hsi_debug_tools.h | 253 #define DBG_ATTN_BIT_MAPPING_IS_UNUSED_BIT_CNT_MASK 0x1 /* if set, the val field indicates the num…
314 #define DBG_MODE_HDR_EVAL_MODE_MASK 0x1 /* indicates if a mode expression should be evaluat…
352 u8 has_latency_events /* Indicates if this block has a latency events debug line (0/1). */;
362 u8 has_latency_events /* Indicates if this block has a latency events debug line (0/1). */;
374 #define DBG_BUS_LINE_IS_256B_MASK 0x1 /* Indicates if this is a 128b line (0) or a 256b line…
404 #define DBG_DUMP_MEM_WIDE_BUS_MASK 0x1 /* indicates if the register is wide-bus */
418 #define DBG_DUMP_REG_WIDE_BUS_MASK 0x1 /* indicates if the register is wide-bus */
453 #define DBG_IDLE_CHK_COND_REG_WIDE_BUS_MASK 0x1 /* indicates if the register is wide-bus */
470 #define DBG_IDLE_CHK_INFO_REG_WIDE_BUS_MASK 0x1 /* indicates if the register is wide-bus */
506 #define DBG_IDLE_CHK_RESULT_REG_HDR_IS_MEM_MASK 0x1 /* indicates if this register is a memory */
[all …]
|
| /freebsd/crypto/heimdal/appl/telnet/telnetd/ |
| H A D | telnetd.8 | 234 indicates that only dotted decimal addresses
344 Indicates that the client is willing to send a
348 Indicates that it will not be sending
352 Indicates a willingness to send the client, upon
374 indicates a willingness to decrypt
401 Indicates a desire to be able to request the
405 Indicates that it does not need to receive
412 Indicates a desire to be able to request information
416 Indicates a desire to be able to request the name
420 Indicates a desire to be able to request environment
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/soundwire/ |
| H A D | qcom,sdw.txt | 69 Value of 0xFF indicates that this option is not implemented
78 Value of 0xFF indicates that this option is not implemented
88 Value of 0xFF indicates that this option is not implemented
96 Value of 0xFF indicates that this option is not implemented
107 Value of 0xFF indicates that this option is not implemented
117 Value of 0xFF indicates that this option is not implemented
127 Value of 0xFF indicates that this option is not implemented
138 Value of 0xFF indicates that this option is not implemented
149 Value of 0xFF indicates that this option is not implemented
161 Value of 0xFF indicates that this option is not implemented
|
| /freebsd/lib/libc/stdio/ |
| H A D | scanf.3 | 141 Indicates that the conversion will be one of
150 Indicates that the conversion will be one of
159 Indicates that the conversion will be one of
185 Indicates that the conversion will be one of
194 Indicates that the conversion will be one of
201 Indicates that the conversion will be one of
210 Indicates that the conversion will be one of
224 Indicates that the conversion will be one of
238 Indicates that the conversion will be one of
247 Indicates that the conversion will be one of
[all …]
|
| /freebsd/usr.sbin/newsyslog/ |
| H A D | newsyslog.conf.5 | 273 indicates that the log file is a binary file, or has some
287 indicates that the log file should be created if it does not
292 indicates that
302 indicates that the log file should not be rotated when its
314 indicates that the specified
324 indicates that
333 indicates that there is no process which needs to be signaled
336 indicates that the zero-th rotated file should not be compressed.
350 indicates that the file specified by
356 indicates that
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | fsl,imx8mm-pinctrl.yaml | 44 "mux_reg" indicates the offset of mux register.
46 "conf_reg" indicates the offset of pad configuration register.
48 "input_reg" indicates the offset of select input register.
50 "mux_val" indicates the mux value to be applied.
52 "input_val" indicates the select input value to be applied.
54 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imx8mn-pinctrl.yaml | 44 "mux_reg" indicates the offset of mux register.
46 "conf_reg" indicates the offset of pad configuration register.
48 "input_reg" indicates the offset of select input register.
50 "mux_val" indicates the mux value to be applied.
52 "input_val" indicates the select input value to be applied.
54 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imx8mp-pinctrl.yaml | 44 "mux_reg" indicates the offset of mux register.
46 "conf_reg" indicates the offset of pad configuration register.
48 "input_reg" indicates the offset of select input register.
50 "mux_val" indicates the mux value to be applied.
52 "input_val" indicates the select input value to be applied.
54 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imx8mq-pinctrl.yaml | 44 "mux_reg" indicates the offset of mux register.
46 "conf_reg" indicates the offset of pad configuration register.
48 "input_reg" indicates the offset of select input register.
50 "mux_val" indicates the mux value to be applied.
52 "input_val" indicates the select input value to be applied.
54 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imx93-pinctrl.yaml | 47 "mux_reg" indicates the offset of mux register.
49 "conf_reg" indicates the offset of pad configuration register.
51 "input_reg" indicates the offset of select input register.
53 "mux_val" indicates the mux value to be applied.
55 "input_val" indicates the select input value to be applied.
57 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imxrt1050.yaml | 45 "mux_reg" indicates the offset of mux register.
47 "conf_reg" indicates the offset of pad configuration register.
49 "input_reg" indicates the offset of select input register.
51 "mux_val" indicates the mux value to be applied.
53 "input_val" indicates the select input value to be applied.
55 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imxrt1170.yaml | 45 "mux_reg" indicates the offset of mux register.
47 "conf_reg" indicates the offset of pad configuration register.
49 "input_reg" indicates the offset of select input register.
51 "mux_val" indicates the mux value to be applied.
53 "input_val" indicates the select input value to be applied.
55 "pad_setting" indicates the pad configuration value to be applied.
|
| H A D | fsl,imx8m-pinctrl.yaml | 49 "mux_reg" indicates the offset of mux register.
51 "conf_reg" indicates the offset of pad configuration register.
53 "input_reg" indicates the offset of select input register.
55 "mux_val" indicates the mux value to be applied.
57 "input_val" indicates the select input value to be applied.
59 "pad_setting" indicates the pad configuration value to be
|
| H A D | fsl,imx9-pinctrl.yaml | 49 "mux_reg" indicates the offset of mux register.
51 "conf_reg" indicates the offset of pad configuration register.
53 "input_reg" indicates the offset of select input register.
55 "mux_val" indicates the mux value to be applied.
57 "input_val" indicates the select input value to be applied.
59 "pad_setting" indicates the pad configuration value to be applied.
|
| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | regulator.yaml | 129 protection and value '1' indicates that protection should be enabled but
135 Zero can be passed to disable error detection and value '1' indicates
142 disable detection and value '1' indicates that detection should
148 protection and value '1' indicates that protection should be enabled but
155 Zero can be passed to disable error detection and value '1' indicates
163 disable detection and value '1' indicates that detection should
170 protection and value '1' indicates that protection should be enabled but
177 Zero can be passed to disable error detection and value '1' indicates
185 to disable detection and value '1' indicates that detection should
200 protection and value '1' indicates tha
[all...] |