/linux/Documentation/hwmon/ |
H A D | amc6821.rst | 63 pwm1_auto_point1_pwm ro Hardwired to 0, shared for both 67 pwm1_auto_point3_pwm rw Hardwired to 255, shared for both 70 temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
|
H A D | adm1025.rst | 44 One specificity of this chip is that the pin 11 can be hardwired in two 49 register can be used to define how the chip is hardwired. Please note that
|
/linux/drivers/clk/versatile/ |
H A D | clk-icst.c | 75 * r is hardwired to 22 and output divider s is hardwired to 1 in vco_get() 90 * and always zero, r is hardwired to 46, and the output divider is in vco_get() 91 * hardwired to 3 (divide by 4) according to the document in vco_get() 105 * to select between two different hardwired values: setting the in vco_get() 122 * r is hardwired to 22 and the output divider s is accessible in vco_get()
|
/linux/Documentation/devicetree/bindings/leds/ |
H A D | richtek,rt8515.yaml | 59 is hardwired to the component using the RFS resistor to 71 is hardwired to the component using the RTS resistor to
|
/linux/Documentation/devicetree/bindings/sound/ |
H A D | adi,adau7002.yaml | 22 hardwired to always on.
|
H A D | adi,ssm2518.yaml | 29 it is assumed that the nSD pin is hardwired to always on.
|
/linux/tools/testing/selftests/alsa/conf.d/ |
H A D | Lenovo_ThinkPad_P1_Gen2.conf | 8 # The sysfs root directory (/sys) is hardwired in the test code
|
/linux/Documentation/devicetree/bindings/mailbox/ |
H A D | amlogic,meson-gxbb-mhu.yaml | 16 MHU links are hardwired on a platform. A link raises interrupt for any
|
H A D | arm,mhu.yaml | 15 are hardwired on a platform. A link raises interrupt for any received data.
|
/linux/arch/sparc/kernel/ |
H A D | iommu_common.h | 32 * This is the hardwired shift in the iotlb tag/data parts.
|
/linux/Documentation/devicetree/bindings/interrupt-controller/ |
H A D | mstar,mst-intc.yaml | 36 lines that are hardwired to mstar interrupt controller.
|
/linux/tools/testing/selftests/rcutorture/doc/ |
H A D | TREE_RCU-kconfig.txt | 14 CONFIG_PROVE_RCU -- Hardwired to CONFIG_PROVE_LOCKING.
|
/linux/Documentation/devicetree/bindings/net/can/ |
H A D | tcan4x5x.txt | 24 - reset-gpios: Hardwired output GPIO. If not defined then software
|
/linux/Documentation/devicetree/bindings/gpio/ |
H A D | gpio-max3191x.txt | 32 is hardwired and consequently "maxim,modesel-gpios"
|
/linux/drivers/gpu/drm/nouveau/nvkm/subdev/therm/ |
H A D | gm107.c | 29 /* nothing to do, it seems hardwired */ in gm107_fan_pwm_ctrl()
|
H A D | gf119.c | 63 /* nothing to do for indx == 2, it seems hardwired to PTHERM */ in gf119_fan_pwm_ctrl()
|
/linux/drivers/reset/ |
H A D | reset-raspberrypi.c | 48 * But since rpi's PCIe is hardwired, we know the address in in rpi_reset_reset()
|
/linux/arch/arm/boot/dts/allwinner/ |
H A D | sunxi-d1s-t113-mangopi-mq-r.dtsi | 117 /* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
|
/linux/Documentation/driver-api/usb/ |
H A D | power-management.rst | 705 one of four values 'hotplug', 'hardwired', 'not used', 714 ``hardwired`` refers to a port that is not visible but 717 switch or a port with a hardwired USB camera. It is 789 done for 'hardwired' ports provided poweroff is coordinated with any
|
/linux/drivers/gpio/ |
H A D | gpio-tps65218.c | 148 /* GPO1 is hardwired to be open drain */ in tps65218_gpio_set_config()
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3566-soquartz-model-a.dts | 175 * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
|
/linux/drivers/usb/core/ |
H A D | of.c | 116 /* Only set connect_type if binding has ports/hardwired devices. */ in usb_of_get_connect_type()
|
/linux/drivers/clk/ti/ |
H A D | fapll.c | 313 /* The audio_pll_clk1 is hardwired to produce 32.768KiHz clock */ in ti_fapll_synth_recalc_rate() 625 /* Check for hardwired audio_pll_clk1 */ in ti_fapll_setup()
|
/linux/drivers/gpu/drm/i915/display/ |
H A D | intel_fdi_regs.h | 65 /* Ironlake: hardwired to 1 */
|
/linux/drivers/gpu/drm/amd/display/dc/dcn301/ |
H A D | dcn301_dio_link_encoder.c |
|