Home
last modified time | relevance | path

Searched +full:enable +full:- +full:active +full:- +full:high (Results 1 – 25 of 1068) sorted by relevance

12345678910>>...43

/linux/arch/arm/mach-sa1100/include/mach/
H A Dh3xxx.h1 /* SPDX-License-Identifier: GPL-2.0-only */
39 /* machine-specific gpios */
60 …CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */
61 …e H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */
62 #define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. …
63 …H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
64 #define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */
65 #define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */
66 #define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */
69 #define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */
[all …]
/linux/arch/arm/boot/dts/nvidia/
H A Dtegra30-cardhu-a04.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include "tegra30-cardhu.dtsi"
10 compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
14 power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
15 bus-width = <4>;
16 keep-power-in-suspend;
19 ddr_reg: regulator-ddr {
20 compatible = "regulator-fixed";
21 regulator-name = "ddr";
[all …]
H A Dtegra30-cardhu-a02.dts1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include "tegra30-cardhu.dtsi"
10 compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
14 power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
15 bus-width = <4>;
16 keep-power-in-suspend;
19 ddr_reg: regulator-ddr {
20 compatible = "regulator-fixed";
21 regulator-name = "vdd_ddr";
[all …]
H A Dtegra30-cardhu.dtsi1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
5 #include "tegra30-cpu-opp.dtsi"
6 #include "tegra30-cpu-opp-microvolt.dtsi"
16 * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
17 * tegra30-cardhu-a04.dts.
20 * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
22 * The (downstream internal) U-Boot of Cardhu display the board-id as
43 stdout-path = "serial0:115200n8";
[all …]
H A Dtegra30-lg-x3.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/input/gpio-keys.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/leds/common.h>
6 #include <dt-bindings/mfd/max77620.h>
7 #include <dt-bindings/thermal/thermal.h>
10 #include "tegra30-cpu-opp.dtsi"
11 #include "tegra30-cpu-opp-microvolt.dtsi"
14 chassis-type = "handset";
30 * pre-existing /chosen node to be available to insert the
[all …]
/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mm-iot-gateway.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 #include "imx8mm-ucm-som.dtsi"
6 #include <dt-bindings/phy/phy-imx8-pcie.h>
9 compatible = "compulab,imx8mm-iot-gateway", "compulab,imx8mm-ucm-som", "fsl,imx8mm";
11 regulator-usbhub-ena {
12 compatible = "regulator-fixed";
13 regulator-name = "usbhub_ena";
14 regulator-min-microvolt = <3300000>;
15 regulator-max-microvolt = <3300000>;
17 enable-active-high;
[all …]
H A Dimx8mp-debix-som-a-bmb-08.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "imx8mp-debix-som-a.dtsi"
12 model = "Polyhex i.MX8MPlus Debix SOM A on BMB-08";
13 compatible = "polyhex,imx8mp-debix-som-a-bmb-08", "polyhex,imx8mp-debix-som-a",
22 stdout-path = &uart2;
25 reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
26 compatible = "regulator-fixed";
27 regulator-min-microvolt = <3300000>;
28 regulator-max-microvolt = <3300000>;
[all …]
/linux/Documentation/devicetree/bindings/regulator/
H A Dgpio-regulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Liam Girdwood <lgirdwood@gmail.com>
11 - Mark Brown <broonie@kernel.org>
18 - $ref: regulator.yaml#
22 const: regulator-gpio
24 regulator-name: true
26 enable-gpios:
[all …]
H A Dfixed-regulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/fixed-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Liam Girdwood <lgirdwood@gmail.com>
11 - Mark Brown <broonie@kernel.org>
16 expected to have the regulator-min-microvolt and regulator-max-microvolt
20 - $ref: regulator.yaml#
21 - if:
25 const: regulator-fixed-clock
[all …]
H A Drichtek,rtmv20-regulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/regulator/richtek,rtmv20-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - ChiYuan Huang <cy_huang@richtek.com>
15 (Enable/Fail), Enable pin to turn chip on, and Fail pin as fault indication.
27 wakeup-source: true
32 enable-gpios:
33 description: A connection of the 'enable' gpio line.
36 richtek,ld-pulse-delay-us:
[all …]
H A Dmaxim,max8973.yaml1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
13 - $ref: regulator.yaml#
18 - maxim,max8973
19 - maxim,max77621
21 junction-warn-millicelsius:
30 maxim,dvs-gpio:
35 maxim,dvs-default-state:
[all …]
/linux/arch/arm/boot/dts/synaptics/
H A Dberlin2q-marvell-dmp.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
12 model = "Marvell BG2-Q DMP";
13 compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
22 stdout-path = "serial0:115200n8";
26 compatible = "simple-bus";
27 #address-cells = <1>;
28 #size-cells = <0>;
[all …]
/linux/drivers/media/dvb-frontends/
H A Dm88ds3103.h1 /* SPDX-License-Identifier: GPL-2.0-or-later */
19 * enum m88ds3103_ts_mode - TS connection mode
47 * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
52 * @ts_clk_pol: TS clk polarity. 1-active at falling edge; 0-active at rising
59 * @lnb_hv_pol: LNB H/V pin polarity. 0: pin high set to VOLTAGE_18, pin low to
60 * set VOLTAGE_13. 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
61 * @lnb_en_pol: LNB enable pin polarity. 0: pin high to disable, pin low to
62 * enable. 1: pin high to enable, pin low to disable.
88 * struct m88ds3103_config - m88ds3102 configuration
98 * 1-active at falling edge; 0-active at rising edge.
[all …]
/linux/drivers/gpio/
H A Dgpiolib-of.c1 // SPDX-License-Identifier: GPL-2.0+
5 * Copyright (c) 2007-2008 MontaVista Software, Inc.
26 #include "gpiolib-of.h"
29 * This is Linux-specific flags. By default controllers' and Linux' mapping
31 * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended.
44 * of_gpio_named_count() - Count GPIOs for a device
53 * * %-EINVAL for an incorrectly formed "gpios" property, or
54 * * %-ENOENT for a missing "gpios" property.
69 return of_count_phandle_with_args(np, propname, "#gpio-cells"); in of_gpio_named_count()
73 * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
[all …]
/linux/arch/arm64/boot/dts/nvidia/
H A Dtegra210-p2894.dtsi1 // SPDX-License-Identifier: GPL-2.0
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/input/gpio-keys.h>
5 #include <dt-bindings/mfd/max77620.h>
6 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
16 stdout-path = "serial0:115200n8";
26 pinctrl-names = "boot";
27 pinctrl-0 = <&state_boot>;
35 nvidia,enable-input = <TEGRA_PIN_DISABLE>;
36 nvidia,open-drain = <TEGRA_PIN_DISABLE>;
[all …]
/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6q-apalis-ixora-v1.2.dts1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 * Copyright 2014-2022 Toradex
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
14 #include "imx6qdl-apalis.dtsi"
18 compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
30 stdout-path = "serial0:115200n8";
34 compatible = "gpio-leds";
[all …]
/linux/arch/arm64/boot/dts/rockchip/
H A Drk3568-radxa-e25.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
4 #include "rk3568-radxa-cm3i.dtsi"
14 pwm-leds {
15 compatible = "pwm-leds-multicolor";
17 multi-led {
20 max-brightness = <255>;
22 led-red {
27 led-green {
32 led-blue {
[all …]
H A Drk3399-gru-chromebook.dtsi1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Google Gru-Chromebook shared properties
8 #include "rk3399-gru.dtsi"
11 pp900_ap: regulator-pp900-ap {
12 compatible = "regulator-fixed";
13 regulator-name = "pp900_ap";
16 regulator-always-on;
17 regulator-boot-on;
18 regulator-min-microvolt = <900000>;
19 regulator-max-microvolt = <900000>;
[all …]
/linux/arch/arm/boot/dts/marvell/
H A Dkirkwood-synology.dtsi1 // SPDX-License-Identifier: GPL-2.0
12 pinctrl: pin-controller@10000 {
13 pmx_alarmled_12: pmx-alarmled-12 {
18 pmx_fanctrl_15: pmx-fanctrl-15 {
23 pmx_fanctrl_16: pmx-fanctrl-16 {
28 pmx_fanctrl_17: pmx-fanctrl-17 {
33 pmx_fanalarm_18: pmx-fanalarm-18 {
38 pmx_hddled_20: pmx-hddled-20 {
43 pmx_hddled_21: pmx-hddled-21 {
48 pmx_hddled_22: pmx-hddled-22 {
[all …]
H A Darmada-388-gp.dts1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 * (RD-88F6820-GP)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
11 /dts-v1/;
12 #include "armada-388.dtsi"
13 #include <dt-bindings/gpio/gpio.h>
16 model = "Marvell Armada 388 DB-88F6820-GP";
17 compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
20 stdout-path = "serial0:115200n8";
35 internal-regs {
[all …]
H A Dkirkwood-net5big.dts1 // SPDX-License-Identifier: GPL-2.0
9 * Based on netxbig_v2-setup.c,
14 /dts-v1/;
17 #include "kirkwood-6281.dtsi"
18 #include "kirkwood-netxbig.dtsi"
22 compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
33 compatible = "regulator-fixed";
35 regulator-name = "hdd1power";
36 regulator-min-microvolt = <5000000>;
37 regulator-max-microvolt = <5000000>;
[all …]
/linux/arch/arm64/boot/dts/qcom/
H A Dmsm8916-samsung-gt510.dts1 // SPDX-License-Identifier: GPL-2.0-only
3 /dts-v1/;
5 #include "msm8916-samsung-gt5-common.dtsi"
10 chassis-type = "tablet";
12 speaker_codec: audio-codec {
14 sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
15 #sound-dai-cells = <0>;
16 pinctrl-0 = <&audio_sdmode_default>;
17 pinctrl-names = "default";
21 compatible = "clk-pwm";
[all …]
/linux/Documentation/devicetree/bindings/serial/
H A Drs485.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 direction for the built-in half-duplex mode. The properties described
11 hereafter shall be given to a half-duplex capable UART node.
14 - Rob Herring <robh@kernel.org>
17 rs485-rts-delay:
18 description: prop-encoded-array <a b>
19 $ref: /schemas/types.yaml#/definitions/uint32-array
21 - description: Delay between rts signal and beginning of data sent in
[all …]
/linux/Documentation/devicetree/bindings/rtc/
H A Drtc-omap.txt4 - compatible:
5 - "ti,da830-rtc" - for RTC IP used similar to that on DA8xx SoC family.
6 - "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
7 This RTC IP has special WAKE-EN Register to enable
11 - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
12 - reg: Address range of rtc register set
13 - interrupts: rtc timer, alarm interrupts in order
16 - system-power-controller: whether the rtc is controlling the system power
18 - clocks: Any internal or external clocks feeding in to rtc
19 - clock-names: Corresponding names of the clocks
[all …]
/linux/arch/arm/boot/dts/allwinner/
H A Dsunxi-common-regulators.dtsi2 * sunxi boards common regulator (ahci target power supply, usb-vbus) code
4 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/gpio/gpio.h>
48 reg_ahci_5v: ahci-5v {
49 compatible = "regulator-fixed";
50 regulator-name = "ahci-5v";
51 regulator-min-microvolt = <5000000>;
52 regulator-max-microvolt = <5000000>;
53 regulator-boot-on;
[all …]

12345678910>>...43