| /linux/Documentation/hwmon/ |
| H A D | lm95234.rst | 30 or four (LM95234) remote diodes as well as its own temperature.
31 The remote diodes can be external devices such as microprocessors,
34 thermal diodes accurately.
|
| H A D | emc2103.rst | 34 be connected to two anti-parallel diodes. These values can be read
37 this 4th channel when anti-parallel diodes are not fitted.
|
| H A D | adm1031.rst | 34 (ADM1030) or two (ADM1031) external diodes.
|
| H A D | pc87360.rst | 134 thermistors (as opposed to thermal diodes for the first three temperature
145 likely have either channels 1 to 3 (thermal diodes) or 3 to 6 (internal
|
| H A D | lm83.rst | 30 well as the temperature of up to three external diodes. The LM82 is
|
| H A D | smsc47m192.rst | 86 temp[2-3]_input temperature measured by external diodes (one of these
|
| H A D | lm85.rst | 104 The temperatures measured are one internal diode, and two remote diodes.
|
| H A D | it87.rst | 382 temperature for thermal diodes or diode-connected thermal transistors.
|
| H A D | asc7621.rst | 114 - Supports PECI interface and monitors internal and remote thermal diodes
|
| /linux/Documentation/devicetree/bindings/iio/light/ |
| H A D | tsl2772.yaml | 34 amstaos,proximity-diodes:
35 description: Proximity diodes to enable
80 amstaos,proximity-diodes = <0>;
|
| H A D | rohm,bu27034anuc.yaml | 13 ROHM BU27034ANUC is an ambient light sensor with 2 channels and 2 photo diodes
|
| /linux/drivers/rtc/ |
| H A D | rtc-ds1343.c | 147 char *diodes = "disabled", *resistors = " "; in ds1343_show_tricklecharger() local
156 diodes = "one diode,"; in ds1343_show_tricklecharger()
160 diodes = "no diode,"; in ds1343_show_tricklecharger()
178 diodes = "disabled"; in ds1343_show_tricklecharger()
183 return sprintf(buf, "%s %s\n", diodes, resistors); in ds1343_show_tricklecharger()
|
| H A D | rtc-ds1305.c | 385 char *diodes = "no"; in ds1305_proc() local
392 diodes = "2 diodes, "; in ds1305_proc()
395 diodes = "1 diode, "; in ds1305_proc()
411 diodes = "no"; in ds1305_proc()
417 seq_printf(seq, "trickle_charge\t: %s%s\n", diodes, resistors); in ds1305_proc()
|
| /linux/Documentation/devicetree/bindings/rtc/ |
| H A D | abracon,abx80x.yaml | 41 Supported are 'standard' diodes with a 0.6V drop
42 and 'schottky' diodes with a 0.3V drop.
|
| /linux/Documentation/ABI/testing/ |
| H A D | sysfs-bus-iio-light-si1133 | 21 Unit-less light intensity with more diodes.
|
| /linux/include/linux/spi/ |
| H A D | ds1305.h | 18 #define DS1305_TRICKLE_DS2 0x08 /* two diodes */
|
| /linux/Documentation/input/devices/ |
| H A D | joystick-parport.rst | 73 case, you'll need to use diodes (as a prevention of destroying your parallel
76 Diodes
288 Also, the connection is a bit more complex. You'll need a bunch of diodes,
290 the same as for db9, however with the diodes between::
292 Diodes
|
| /linux/drivers/hwmon/ |
| H A D | emc2103.c | 39 * 2103-2 and 2103-4's 3rd temperature sensor can be connected to two diodes
572 /* 2103-2 and 2103-4 have 3 external diodes, 2103-1 has 1 */ in emc2103_probe()
578 /* 2103-2 and 2103-4 have 3 or 4 external diodes */ in emc2103_probe()
|
| /linux/Documentation/misc-devices/ |
| H A D | isl29003.rst | 64 2: difference between diodes (l1 - l2, signed 15bit)
|
| /linux/arch/arm64/boot/dts/qcom/ |
| H A D | msm8939-huawei-kiwi.dts | 97 amstaos,proximity-diodes = <0>;
|
| H A D | msm8916-huawei-g7.dts | 134 amstaos,proximity-diodes = <1>;
|
| /linux/Documentation/devicetree/bindings/gpio/ |
| H A D | gpio-pca95xx.yaml | 20 - const: diodes,pi4ioe5v6534q
|
| /linux/drivers/input/serio/ |
| H A D | parkbd.c | 33 * The diodes can be fairly any type, and the resistors should be somewhere
|
| /linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-tyan-s8036.dts | 393 * protected through diodes.
|
| H A D | aspeed-bmc-tyan-s7106.dts | 439 * protected through diodes.
|