| /linux/drivers/memory/ |
| H A D | omap-gpmc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2005-2006 Nokia Corporation 10 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> 33 #include <linux/omap-gpmc.h> 37 #include <linux/platform_data/mtd-nand-omap2.h> 39 #define DEVICE_NAME "omap-gpmc" 60 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ 61 #define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ 62 #define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ 63 #define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ [all …]
|
| /linux/Documentation/devicetree/bindings/memory-controllers/ |
| H A D | ti,gpmc-child.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Tony Lindgren <tony@atomide.com> 11 - Roger Quadros <rogerq@kernel.org> 24 gpmc,sync-clk-ps: 28 # Chip-select signal timings corresponding to GPMC_CONFIG2: 29 gpmc,cs-on-ns: 33 gpmc,cs-rd-off-ns: [all …]
|
| H A D | ti-aemif.txt | 4 provide a glue-less interface to a variety of asynchronous memory devices like 11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf 12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf 13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf 17 - compatible: "ti,davinci-aemif" 18 "ti,keystone-aemif" 19 "ti,da850-aemif" 21 - reg: contains offset/length value for AEMIF control registers 24 - #address-cells: Must be 2. The partition number has to be encoded in the 25 first address cell and it may accept values 0..N-1 [all …]
|
| H A D | st,stm32-fmc2-ebi-props.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Christophe Kerello <christophe.kerello@foss.st.com> 11 - Marek Vasut <marex@denx.de> 14 st,fmc2-ebi-cs-transaction-type: 33 st,fmc2-ebi-cs-cclk-enable: 40 st,fmc2-ebi-cs-mux-enable: 41 description: Address/Data multiplexed on databus (valid only with [all …]
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | omap-gpmc-smsc911x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Common file for GPMC connected smsc911x on omaps 10 vddvario: regulator-vddvario { 11 compatible = "regulator-fixed"; 12 regulator-name = "vddvario"; 13 regulator-always-on; 16 vdd33a: regulator-vdd33a { 17 compatible = "regulator-fixed"; 18 regulator-name = "vdd33a"; 19 regulator-always-on; [all …]
|
| H A D | omap-gpmc-smsc9221.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Common file for GPMC connected smsc9221 on omaps 14 vddvario: regulator-vddvario { 15 compatible = "regulator-fixed"; 16 regulator-name = "vddvario"; 17 regulator-always-on; 20 vdd33a: regulator-vdd33a { 21 compatible = "regulator-fixed"; 22 regulator-name = "vdd33a"; 23 regulator-always-on; [all …]
|
| H A D | omap3-overo-tobiduo-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 10 #include "omap3-overo-common-peripherals.dtsi" 12 #include "omap-gpmc-smsc9221.dtsi" 17 interrupt-parent = <&gpio6>; 23 bank-width = <2>; 25 gpmc,mux-add-data = <0>; 26 gpmc,cs-on-ns = <0>; 27 gpmc,cs-rd-off-ns = <42>; 28 gpmc,cs-wr-off-ns = <36>; 29 gpmc,adv-on-ns = <6>; [all …]
|
| H A D | omap2430-sdp.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2"; 20 clock-frequency = <100000>; 31 vmmc-supply = <&vmmc1>; 32 bus-width = <4>; 39 interrupt-parent = <&gpio5>; 42 bank-width = <2>; 43 gpmc,sync-clk-ps = <0>; [all …]
|
| H A D | omap2420-h4.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 5 /dts-v1/; 11 compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; 23 compatible = "cfi-flash"; 24 linux,mtd-name = "intel,ge28f256l18b85"; 25 #address-cells = <1>; 26 #size-cells = <1>; 28 bank-width = <2>; 30 gpmc,mux-add-data = <2>; [all …]
|
| H A D | omap2420-n8x0-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 11 stdout-path = &uart3; 16 compatible = "i2c-cbus-gpio"; 21 #address-cells = <1>; 22 #size-cells = <0>; 25 interrupt-parent = <&gpio4>; 34 clock-frequency = <400000>; 44 clock-frequency = <400000>; 50 /* gpio-irq for dma: 26 */ 53 #address-cells = <1>; [all …]
|
| H A D | omap-zoom-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Common features on the Zoom debug board 6 #include "omap-gpmc-smsc911x.dtsi" 13 * Four port TL16CP754C serial port on GPMC, 20 bank-width = <2>; 21 reg-shift = <1>; 22 reg-io-width = <1>; 23 interrupt-parent = <&gpio4>; 25 clock-frequency = <1843200>; 26 current-speed = <115200>; [all …]
|
| H A D | omap3-gta04a5one.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> 6 #include "omap3-gta04a5.dts" 13 gpmc_pins: gpmc-pins { 14 pinctrl-single,pins = < 33 * according to TRM. OneNAND seems to require PIN_INPUT on clock. 45 pinctrl-names = "default"; 46 pinctrl-0 = <&gpmc_pins>; 48 /delete-node/ nand@0,0; 52 #address-cells = <1>; [all …]
|
| H A D | am335x-chilisom.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ 7 #include <dt-bindings/interrupt-controller/irq.h> 11 compatible = "grinn,am335x-chilisom", "ti,am33xx"; 15 cpu0-supply = <&dcdc2_reg>; 26 pinctrl-names = "default"; 28 i2c0_pins: i2c0-pins { 29 pinctrl-single,pins = < 35 nandflash_pins: nandflash-pins { 36 pinctrl-single,pins = < [all …]
|
| H A D | am335x-nano.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/ 5 /dts-v1/; 15 cpu0-supply = <&dcdc2_reg>; 25 compatible = "gpio-leds"; 30 default-state = "off"; 36 pinctrl-names = "default"; 37 pinctrl-0 = <&misc_pins>; 39 misc_pins: misc-pins { 40 pinctrl-single,pins = < [all …]
|
| H A D | omap3-lilly-a83x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 9 model = "INCOstartec LILLY-A83X module (DM3730)"; 10 compatible = "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; 22 compatible = "gpio-leds"; 25 label = "lilly-a83x::led1"; 27 linux,default-trigger = "default-on"; 33 compatible = "ti,omap-twl4030"; 34 ti,model = "lilly-a83x"; 40 compatible = "regulator-fixed"; 41 regulator-name = "VCC3"; [all …]
|
| H A D | omap4-duovero-parlor.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 5 /dts-v1/; 7 #include "omap4-duovero.dtsi" 9 #include <dt-bindings/input/input.h> 12 model = "OMAP4430 Gumstix Duovero on Parlor"; 13 compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; 20 compatible = "gpio-leds"; 24 linux,default-trigger = "heartbeat"; 29 compatible = "gpio-keys"; 30 #address-cells = <1>; [all …]
|
| /linux/arch/arm/boot/dts/st/ |
| H A D | stm32mp15xx-dhcor-drc-compact.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) 21 stdout-path = "serial0:115200n8"; 25 compatible = "gpio-leds"; 29 default-state = "off"; 35 default-state = "off"; 40 compatible = "regulator-fixed"; 41 regulator-name = "vio"; 42 regulator-min-microvolt = <3300000>; 43 regulator-max-microvolt = <3300000>; 45 regulator-always-on; [all …]
|
| /linux/Documentation/devicetree/bindings/spi/ |
| H A D | spi-peripheral-props.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Peripheral-specific properties for a SPI bus. 11 be common properties like spi-max-frequency, spi-cs-high, etc. or they could 14 per-peripheral and there can be multiple peripherals attached to a 20 - Mark Brown <broonie@kernel.org> 28 - minimum: 0 33 spi-cs-high: [all …]
|
| /linux/Documentation/devicetree/bindings/pwm/ |
| H A D | nxp,mc33xs2410.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: High-side switch MC33XS2410 10 - Dimitri Fedrau <dima.fedrau@gmail.com> 13 - $ref: pwm.yaml# 14 - $ref: /schemas/spi/spi-peripheral-props.yaml# 23 spi-max-frequency: 26 spi-cpha: true 28 spi-cs-setup-delay-ns: [all …]
|
| /linux/arch/arm/boot/dts/ti/keystone/ |
| H A D | keystone-k2l-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 10 #include "keystone-k2l.dtsi" 13 compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; 16 reserved-memory { 17 #address-cells = <2>; 18 #size-cells = <2>; 21 dsp_common_memory: dsp-common-memory@81f800000 { 22 compatible = "shared-dma-pool"; [all …]
|
| H A D | keystone-k2e-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 10 #include "keystone-k2e.dtsi" 13 compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; 16 reserved-memory { 17 #address-cells = <2>; 18 #size-cells = <2>; 21 dsp_common_memory: dsp-common-memory@81f800000 { 22 compatible = "shared-dma-pool"; [all …]
|
| H A D | keystone-k2hk-evm.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/ 7 /dts-v1/; 10 #include "keystone-k2hk.dtsi" 13 compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; 16 reserved-memory { 17 #address-cells = <2>; 18 #size-cells = <2>; 21 dsp_common_memory: dsp-common-memory@81f800000 { 22 compatible = "shared-dma-pool"; [all …]
|
| /linux/arch/arm64/boot/dts/ti/ |
| H A D | k3-am62-lp-sk-nand.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 6 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include "k3-pinctrl.h" 17 gpmc0_pins_default: gpmc0-pins-default { 18 pinctrl-single,pins = < 44 pinctrl-names = "default"; 45 pinctrl-0 = <&gpmc0_pins_default>; [all …]
|
| H A D | k3-am642-evm-nand.dtso | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * DT overlay for HSE NAND expansion card on AM642 EVM 5 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include "k3-pinctrl.h" 15 gpmc0_default_pins: gpmc0-default-pins { 16 bootph-all; 17 pinctrl-single,pins = < [all …]
|
| /linux/arch/arm64/boot/dts/freescale/ |
| H A D | fsl-ls1043a-rdb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 * Device Tree Include file for Freescale Layerscape-1043A family SoC. 5 * Copyright 2014-2015 Freescale Semiconductor, Inc. 11 /dts-v1/; 12 #include "fsl-ls1043a.dtsi" 16 compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; 26 stdout-path = "serial0:115200n8"; 36 shunt-resistor = <1000>; 67 #address-cells = <2>; 68 #size-cells = <1>; [all …]
|