| /freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | imx8mn-ddr3l-evk.dts | 57 buck5: BUCK5 { label
118 avdd-supply = <&buck5>;
119 dvdd-supply = <&buck5>;
120 pvdd-supply = <&buck5>;
121 a2vdd-supply = <&buck5>;
122 v1p2-supply = <&buck5>;
128 DOVDD-supply = <&buck5>;
|
| H A D | imx8mn-evk.dts | 70 buck5: BUCK5 { label
131 avdd-supply = <&buck5>;
132 dvdd-supply = <&buck5>;
133 pvdd-supply = <&buck5>;
134 a2vdd-supply = <&buck5>;
135 v1p2-supply = <&buck5>;
141 DOVDD-supply = <&buck5>;
|
| H A D | imx93-tqma9352.dtsi | 43 vref-supply = <&buck5>;
133 buck5: BUCK5 { label
134 regulator-name = "BUCK5";
221 vqmmc-supply = <&buck5>;
|
| H A D | imx8mp-icore-mx8mp.dtsi | 71 buck5: BUCK5 { label
76 regulator-name = "BUCK5";
|
| H A D | imx8mn-ddr4-evk.dts | 86 // BUCK5 in datasheet
101 buck5_reg: BUCK5 {
103 regulator-name = "buck5";
|
| H A D | imx8mm-emtop-som.dtsi | 100 buck5: BUCK5 { label
101 regulator-name = "BUCK5";
|
| H A D | imx8mm-evkb.dts | 67 buck5_reg: BUCK5 {
68 regulator-name = "BUCK5";
|
| H A D | imx8mp-phycore-som.dtsi | 136 buck5: BUCK5 { label
141 regulator-name = "VDD_1V8 (BUCK5)";
|
| H A D | imx8mp-var-som.dtsi | 110 buck5: BUCK5 { label
111 regulator-name = "BUCK5";
|
| H A D | imx8mp-beacon-kit.dts | 341 avdd-supply = <&buck5>;
342 dvdd-supply = <&buck5>;
343 pvdd-supply = <&buck5>;
344 a2vdd-supply = <&buck5>;
345 v1p2-supply = <&buck5>;
|
| H A D | imx8mq-pico-pi.dts | 115 buck5: BUCK5 { label
116 regulator-name = "buck5";
|
| H A D | imx8mm-beacon-som.dtsi | 142 // BUCK5 in datasheet
159 buck5_reg: BUCK5 {
161 regulator-name = "buck5";
|
| H A D | imx8mm-innocomm-wb15.dtsi | 100 // buck5 in datasheet
117 buck5_reg: BUCK5 {
119 regulator-name = "buck5";
|
| H A D | imx8mn-beacon-som.dtsi | 151 // BUCK5 in datasheet
168 buck5_reg: BUCK5 {
170 regulator-name = "buck5";
|
| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | maxim,max8997.yaml | 57 max8997,pmic-buck5-dvs-voltage:
62 A set of 8 voltage values in micro-volt (uV) units for buck5 when
79 max8997,pmic-buck5-uses-gpio-dvs:
82 buck5 can be controlled by GPIO DVS.
249 - max8997,pmic-buck5-dvs-voltage
256 max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
267 - max8997,pmic-buck5-uses-gpio-dvs
276 max8997,pmic-buck5-dvs-voltage:
298 max8997,pmic-buck5-uses-gpio-dvs;
317 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
[all …]
|
| H A D | max8997-regulator.txt | 21 - max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
22 units for buck5 when changing voltage using gpio dvs. Refer to [1] below
41 - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
99 max8997,pmic-buck5-uses-gpio-dvs;
118 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
|
| H A D | nxp,pca9450-regulator.yaml | 21 # BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
143 buck5: BUCK5 {
144 regulator-name = "BUCK5";
|
| H A D | rohm,bd71847-regulator.yaml | 21 regulator-boot-on at least for BUCK5. LDO6 is supplied by it and it must
22 not be disabled by driver at startup. If BUCK5 is disabled at startup the
26 # BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6
|
| H A D | rohm,bd71815-regulator.yaml | 20 buck1, buck2, buck3, buck4, buck5,
47 should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
|
| H A D | max77802.txt | 16 - inb5-supply: The input supply for BUCK5
48 example: BUCK1, BUCK5, BUCK10.
|
| /freebsd/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | ti,tps6594.yaml | 130 buck5-supply = <&vcc_3v3_sys>;
133 ldo3-supply = <&buck5>;
153 buck5: buck5 {
|
| H A D | rohm,bd71828-pmic.yaml | 142 buck5: BUCK5 {
143 regulator-name = "buck5";
|
| H A D | rohm,bd71815-pmic.yaml | 149 buck5: buck5 {
150 regulator-name = "buck5";
|
| H A D | rohm,bd71847-pmic.yaml | 182 buck5: BUCK5 {
183 regulator-name = "buck5";
|
| H A D | rohm,bd71837-pmic.yaml | 181 buck5: BUCK5 {
182 regulator-name = "buck5";
|