| /freebsd/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | samsung,s5m8767.yaml | 47 s5m8767,pmic-buck3-dvs-voltage:
52 A set of 8 voltage values in micro-volt (uV) units for buck3 when
74 s5m8767,pmic-buck3-uses-gpio-dvs:
76 description: buck3 can be controlled by gpio dvs.
104 description: Power supply for buck3
147 s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
150 …s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage…
159 - s5m8767,pmic-buck3-uses-gpio-dvs
166 - s5m8767,pmic-buck3-uses-gpio-dvs
204 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
| H A D | ti,lp87524-q1.yaml | 46 - buck3
62 - buck3-in-supply
83 buck3-in-supply = <&vdd_5v0>;
107 buck3_reg: buck3 {
108 regulator-name = "buck3";
|
| H A D | rohm,bd70528-pmic.txt | 66 buck3: BUCK3 {
67 regulator-name = "buck3";
|
| H A D | richtek,rt5120.yaml | 56 description: phandle for buck3 input power source
147 buck3 {
148 regulator-name = "rt5120-buck3";
|
| H A D | da9052-i2c.txt | 21 buck3 : regulator BUCK MEM
56 buck3 {
|
| H A D | rohm,bd71828-pmic.yaml | 132 buck3: BUCK3 {
133 regulator-name = "buck3";
|
| H A D | rohm,bd71815-pmic.yaml | 137 buck3: buck3 {
138 regulator-name = "buck3";
|
| H A D | rohm,bd71847-pmic.yaml | 170 buck3: BUCK3 {
171 regulator-name = "buck3";
|
| H A D | rohm,bd71837-pmic.yaml | 167 buck3: BUCK3 {
168 regulator-name = "buck3";
|
| H A D | st,stpmic1.yaml | 90 - buck3 for Buck BUCK3
315 buck3 {
|
| H A D | da9062.txt | 59 buck3 : BUCK_3
70 buck3 : BUCK_3
|
| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | rohm,bd70528-regulator.txt | 4 - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
12 BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
33 buck3: BUCK3 {
34 regulator-name = "buck3";
|
| H A D | samsung,s5m8767.txt | 20 - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
21 units for buck3 when changing voltage using gpio dvs. Refer to [1] below
42 - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
86 s5m8767,pmic-buck3-uses-gpio-dvs;
104 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
| H A D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
47 BUCK3 {
48 regulator-name = "buck3";
|
| H A D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
42 BUCK3 {
43 regulator-name = "buck3";
|
| H A D | richtek,rt5190a-regulator.yaml | 35 description: phandle to buck3 input voltage.
120 buck3 {
121 regulator-name = "rt5190a-buck3";
|
| H A D | richtek,rtq2134-regulator.yaml | 93 buck3 {
94 regulator-name = "rtq2134-buck3";
|
| H A D | ti,tps65219.yaml | 105 buck3-supply = <&vcc_3v3_sys>;
134 buck3_reg: buck3 {
|
| H A D | nxp,pca9450-regulator.yaml | 21 # BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
23 # Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
|
| /freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | imx8mm-emtop-som.dtsi | 84 buck3: BUCK3 { label
85 regulator-name = "BUCK3";
|
| H A D | imx8mm-evkb.dts | 49 buck3_reg: BUCK3 {
50 regulator-name = "BUCK3";
|
| H A D | imx8mq-pico-pi.dts | 99 buck3: BUCK3 { label
100 regulator-name = "buck3";
|
| H A D | imx8mn-ddr4-evk.dts | 85 buck3_reg: BUCK3 {
87 regulator-name = "buck3";
|
| H A D | imx8mq-phanbell.dts | 154 buck3: BUCK3 { label
155 regulator-name = "buck3";
|
| /freebsd/sys/contrib/device-tree/src/arm64/ti/ |
| H A D | k3-j7200-som-p0.dtsi | 335 buck3-supply = <&vsys_3v3>;
360 bucka3: buck3 {
428 buck3-supply = <&vsys_3v3>;
449 buckb3: buck3 {
|