| /freebsd/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | samsung,s5m8767.yaml | 39 s5m8767,pmic-buck2-dvs-voltage:
44 A set of 8 voltage values in micro-volt (uV) units for buck2 when
70 s5m8767,pmic-buck2-uses-gpio-dvs:
72 description: buck2 can be controlled by gpio dvs.
102 description: Power supply for buck2
146 s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
149 …s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage…
158 - s5m8767,pmic-buck2-uses-gpio-dvs
162 - s5m8767,pmic-buck2-uses-gpio-dvs
189 s5m8767,pmic-buck2-uses-gpio-dvs;
[all …]
|
| H A D | max8998.txt | 29 - max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
36 - max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
47 Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
48 - max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
49 for buck2 regulator that can be selected using dvs gpio.
68 - Example: BUCK1, BUCK2, BUCK3, BUCK4
98 max8998,pmic-buck2-default-dvs-idx = <0>;
99 max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
100 max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
|
| H A D | ti,lp87524-q1.yaml | 45 - buck2
61 - buck2-in-supply
82 buck2-in-supply = <&vdd_5v0>;
100 buck2_reg: buck2 {
101 regulator-name = "buck2";
|
| H A D | da9055.txt | 34 buck2 : regulator BUCK2
61 buck2: BUCK2 {
|
| H A D | mediatek,mt6360.yaml | 145 LDO_VIN3-supply = <&BUCK2>;
154 BUCK2: buck2 {
155 regulator-name = "mt6360,buck2";
|
| H A D | rohm,bd70528-pmic.txt | 59 buck2: BUCK2 {
60 regulator-name = "buck2";
|
| H A D | richtek,rt5120.yaml | 53 description: phandle for buck2 input power source
140 buck2 {
141 regulator-name = "rt5120-buck2";
|
| /freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | imx8mp-icore-mx8mp.dtsi | 13 cpu-supply = <&buck2>;
17 cpu-supply = <&buck2>;
21 cpu-supply = <&buck2>;
25 cpu-supply = <&buck2>;
52 buck2: BUCK2 { label
59 regulator-name = "BUCK2";
|
| H A D | imx8mn-evk.dts | 18 cpu-supply = <&buck2>;
22 cpu-supply = <&buck2>;
26 cpu-supply = <&buck2>;
30 cpu-supply = <&buck2>;
53 buck2: BUCK2 { label
|
| H A D | imx8mm-emtop-som.dtsi | 36 cpu-supply = <&buck2>;
40 cpu-supply = <&buck2>;
44 cpu-supply = <&buck2>;
48 cpu-supply = <&buck2>;
75 buck2: BUCK2 { label
76 regulator-name = "BUCK2";
|
| H A D | imx8mp-phycore-som.dtsi | 35 cpu-supply = <&buck2>;
39 cpu-supply = <&buck2>;
43 cpu-supply = <&buck2>;
47 cpu-supply = <&buck2>;
117 buck2: BUCK2 { label
124 regulator-name = "VDD_ARM (BUCK2)";
|
| H A D | imx8mp-var-som.dtsi | 52 cpu-supply = <&buck2>;
56 cpu-supply = <&buck2>;
60 cpu-supply = <&buck2>;
64 cpu-supply = <&buck2>;
91 buck2: BUCK2 { label
92 regulator-name = "BUCK2";
|
| H A D | imx8mp-navqp.dts | 49 cpu-supply = <&buck2>;
53 cpu-supply = <&buck2>;
57 cpu-supply = <&buck2>;
61 cpu-supply = <&buck2>;
112 buck2: BUCK2 { label
113 regulator-name = "BUCK2";
|
| H A D | imx8mq-phanbell.dts | 52 cpu-supply = <&buck2>;
56 cpu-supply = <&buck2>;
60 cpu-supply = <&buck2>;
64 cpu-supply = <&buck2>;
144 buck2: BUCK2 { label
145 regulator-name = "buck2";
|
| H A D | imx8mp-beacon-som.dtsi | 32 cpu-supply = <&buck2>;
36 cpu-supply = <&buck2>;
40 cpu-supply = <&buck2>;
44 cpu-supply = <&buck2>;
174 buck2: BUCK2 { label
175 regulator-name = "BUCK2";
|
| H A D | imx8mp-debix-model-a.dts | 72 cpu-supply = <&buck2>;
76 cpu-supply = <&buck2>;
80 cpu-supply = <&buck2>;
84 cpu-supply = <&buck2>;
155 buck2: BUCK2 { label
156 regulator-name = "BUCK2";
|
| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | rohm,bd70528-regulator.txt | 4 - regulator-name: should be "buck1", "buck2", "buck3", "ldo1", "ldo2", "ldo3",
12 BUCK1, BUCK2, BUCK3, LDO1, LDO2, LDO3, LED_LDO1, LED_LDO2
26 buck2: BUCK2 {
27 regulator-name = "buck2";
|
| H A D | maxim,max8997.yaml | 45 max8997,pmic-buck2-dvs-voltage:
50 A set of 8 voltage values in micro-volt (uV) units for buck2 when
74 max8997,pmic-buck2-uses-gpio-dvs:
77 buck2 can be controlled by GPIO DVS.
248 - max8997,pmic-buck2-dvs-voltage
255 max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
265 - max8997,pmic-buck2-uses-gpio-dvs
273 max8997,pmic-buck2-dvs-voltage:
297 max8997,pmic-buck2-uses-gpio-dvs;
312 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
[all …]
|
| H A D | samsung,s5m8767.txt | 16 - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
17 units for buck2 when changing voltage using gpio dvs. Refer to [1] below
41 - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
62 - Example: BUCK1, BUCK2, BUCK9
85 s5m8767,pmic-buck2-uses-gpio-dvs;
99 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
|
| H A D | max8997-regulator.txt | 17 - max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
18 units for buck2 when changing voltage using gpio dvs. Refer to [1] below
40 - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
74 - Example: BUCK1, BUCK2, BUCK3, BUCK7
98 max8997,pmic-buck2-uses-gpio-dvs;
113 max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
|
| H A D | mt6360-regulator.yaml | 47 LDO_VIN3-supply = <&BUCK2>;
56 BUCK2: buck2 {
57 regulator-name = "mt6360,buck2";
|
| H A D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
39 BUCK2 {
40 regulator-name = "buck2";
|
| H A D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
34 BUCK2 {
35 regulator-name = "buck2";
|
| H A D | nxp,pca9450-regulator.yaml | 21 # BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
126 buck2: BUCK2 {
127 regulator-name = "BUCK2";
|
| H A D | richtek,rt5190a-regulator.yaml | 32 description: phandle to buck2 input voltage.
114 buck2 {
115 regulator-name = "rt5190a-buck2";
|