Home
last modified time | relevance | path

Searched full:adc (Results 1 – 25 of 1076) sorted by relevance

12345678910>>...44

/freebsd/sys/contrib/device-tree/Bindings/iio/adc/
H A Dst,stm32-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
7 title: STMicroelectronics STM32 ADC
10 STM32 ADC is a successive approximation analog-to-digital converter.
12 in single, continuous, scan or discontinuous mode. Result of the ADC is
19 Each STM32 ADC block can have up to 3 ADC instances.
27 - st,stm32f4-adc-core
28 - st,stm32h7-adc-core
29 - st,stm32mp1-adc-core
30 - st,stm32mp13-adc-core
37 One or more interrupts for ADC block, depending on part used:
[all …]
H A Dat91_adc.txt1 * AT91's Analog to Digital Converter (ADC)
4 - compatible: Should be "atmel,<chip>-adc"
6 - reg: Should contain ADC registers location and length
7 - interrupts: Should contain the IRQ line for the ADC
11 - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
13 - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
15 - atmel,adc-vref: Reference voltage in millivolts for the conversions
16 - atmel,adc-res: List of resolutions in bits supported by the ADC. List size
18 - atmel,adc-res-names: Contains one identifier string for each resolution
19 in atmel,adc-res property. "lowres" and "highres"
[all …]
H A Datmel,sama9260-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
7 title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
15 - atmel,at91sam9260-adc
16 - atmel,at91sam9rl-adc
17 - atmel,at91sam9g45-adc
18 - atmel,at91sam9x5-adc
19 - atmel,at91sama5d3-adc
36 atmel,adc-channels-used:
40 atmel,adc
[all...]
H A Dsamsung,exynos-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/samsung,exynos-adc.yaml#
7 title: Samsung Exynos Analog to Digital Converter (ADC)
16 - samsung,exynos-adc-v1 # Exynos5250
17 - samsung,exynos-adc-v2
18 - samsung,exynos3250-adc
19 - samsung,exynos4212-adc # Exynos4212 and Exynos4412
20 - samsung,exynos7-adc
21 - samsung,s3c2410-adc
22 - samsung,s3c2416-adc
[all...]
H A Dingenic,adc.txt1 * Ingenic JZ47xx ADC controller IIO bindings
6 * ingenic,jz4725b-adc
7 * ingenic,jz4740-adc
8 * ingenic,jz4770-adc
9 - reg: ADC controller registers location and length.
10 - clocks: phandle to the SoC's ADC clock.
11 - clock-names: Must be set to "adc".
15 ADC clients must use the format described in iio-bindings.txt, giving
16 a phandle and IIO specifier pair ("io-channels") to the ADC controller.
20 #include <dt-bindings/iio/adc/ingenic,adc.h>
[all …]
H A Dqcom,pm8018-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
13 The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
14 oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
19 - qcom,pm8018-adc
20 - qcom,pm8038-adc
21 - qcom,pm8058-adc
22 - qcom,pm8921-adc
27 ADC base address in the PMIC, typically 0x197.
62 - adc-channel@c
63 - adc-channel@d
[all …]
H A Dqcom,pm8xxx-xoadc.txt3 The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal
4 oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921.
9 "qcom,pm8018-adc"
10 "qcom,pm8038-adc"
11 "qcom,pm8058-adc"
12 "qcom,pm8921-adc"
14 - reg: should contain the ADC base address in the PMIC, typically
23 ADC has a special addressing scheme that require two cells for
24 identifying each ADC channel:
39 and reference the proper ADC interrupt.
[all …]
H A Dti,am3359-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
7 title: TI AM3359 ADC
16 - ti,am3359-adc
17 - ti,am4372-adc
20 - ti,am654-adc
21 - const: ti,am3359-adc
26 ti,adc-channels:
27 description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
34 description: List of open delays for each channel of ADC in the order of
35 ti,adc-channels. The value corresponds to the number of ADC clock cycles
[all …]
H A Dst,stm32-dfsdm-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
7 title: STMicroelectronics STM32 DFSDM ADC device driver
14 STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
85 - st,stm32-dfsdm-adc
95 st,adc-channels:
97 List of single-ended channels muxed for this ADC.
99 - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
107 st,adc-channel-names:
129 st,adc-channel-types:
141 st,adc-channel-clk-src:
[all …]
H A Dingenic,adc.yaml5 $id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
8 title: Ingenic JZ47xx ADC controller IIO
14 Industrial I/O subsystem bindings for ADC controller found in
17 ADC clients must use the format described in
19 giving a phandle and IIO specifier pair ("io-channels") to the ADC controller.
24 - ingenic,jz4725b-adc
25 - ingenic,jz4740-adc
26 - ingenic,jz4760-adc
27 - ingenic,jz4760b-adc
28 - ingenic,jz4770-adc
[all …]
H A Dx-powers,axp209-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
7 title: X-Powers AXP ADC
13 ADC is frequently used as a provider to consumers of the ADC channels.
15 ADC channels and their indexes per variant:
64 - const: x-powers,axp209-adc
65 - const: x-powers,axp221-adc
66 - const: x-powers,axp717-adc
67 - const: x-powers,axp813-adc
70 - const: x-powers,axp803-adc
71 - const: x-powers,axp813-adc
[all …]
H A Dnuvoton,npcm-adc.txt1 Nuvoton NPCM Analog to Digital Converter (ADC)
3 The NPCM ADC is a 10-bit converter for eight channel inputs.
6 - compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
8 - interrupts: Contain the ADC interrupt with flags for falling edge.
12 - clocks: phandle of ADC reference clock, in case the clock is not
13 added the ADC will use the default ADC sample rate.
14 - vref-supply: The regulator supply ADC reference voltage, in case the
15 vref-supply is not added the ADC will use internal voltage
20 adc: adc@f000c000 {
21 compatible = "nuvoton,npcm750-adc";
H A Dsprd,sc2720-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
7 title: Spreadtrum SC27XX series PMICs ADC
13 Supports the ADC found on these PMICs.
18 - sprd,sc2720-adc
19 - sprd,sc2721-adc
20 - sprd,sc2723-adc
21 - sprd,sc2730-adc
22 - sprd,sc2731-adc
23 - sprd,ump9620-adc
48 - sprd,ump9620-adc
[all …]
H A Dadi,axi-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
7 title: Analog Devices AXI ADC IP core
13 Analog Devices Generic AXI ADC IP core for interfacing an ADC device
17 interface for the actual ADC, while this IP core will interface
18 to the data-lines of the ADC and handle the streaming of data into
26 - adi,axi-adc-10.0.a
41 adi,adc-dev:
44 A reference to a the actual ADC to which this FPGA ADC interfaces to.
60 axi-adc@44a00000 {
61 compatible = "adi,axi-adc-10.0.a";
H A Dcc10001_adc.txt1 * Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
4 - compatible: Should be "cosmic,10001-adc"
5 - reg: Should contain adc registers location and length.
6 - clock-names: Should contain "adc".
8 - vref-supply: The regulator supply ADC reference voltage.
11 - adc-reserved-channels: Bitmask of reserved channels,
15 adc: adc@18101600 {
16 compatible = "cosmic,10001-adc";
18 adc-reserved-channels = <0x2>;
20 clock-names = "adc";
H A Dimx7d-adc.txt1 Freescale imx7d ADC bindings
3 The devicetree bindings are for the ADC driver written for
7 - compatible: Should be "fsl,imx7d-adc"
8 - reg: Offset and length of the register set for the ADC device
9 - interrupts: The interrupt number for the ADC device
10 - clocks: The root clock of the ADC controller
11 - clock-names: Must contain "adc", matching entry in the clocks property
12 - vref-supply: The regulator supply ADC reference voltage
16 adc1: adc@30610000 {
17 compatible = "fsl,imx7d-adc";
[all …]
H A Dqcom,spmi-vadc.txt1 Qualcomm's SPMI PMIC ADC
3 - SPMI PMIC voltage ADC (VADC) provides interface to clients to read
4 voltage. The VADC is a 15-bit sigma-delta ADC.
5 - SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
6 voltage. The VADC is a 16-bit sigma-delta ADC.
14 Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
15 Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
16 Should contain "qcom,pms405-adc" for PMS405 PMIC
26 Definition: Must be one. Child node 'reg' property should define ADC
50 Definition: ADC channel number.
[all …]
H A Dfsl,imx25-gcq.txt1 Freescale i.MX25 ADC GCQ device
4 analog inputs using the ADC unit of the i.MX25.
15 - vref-ext-supply: The regulator supplying the ADC reference voltage.
17 - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
19 - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
37 - fsl,adc-refp: specifies the positive reference input as defined in
38 <dt-bindings/iio/adc/fsl-imx25-gcq.h>
39 - fsl,adc-refn: specifies the negative reference input as defined in
40 <dt-bindings/iio/adc/fsl-imx25-gcq.h>
44 adc: adc@50030800 {
[all …]
H A Drenesas,rzg2l-adc.yaml4 $id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml#
7 title: Renesas RZ/G2L ADC
15 Conversions can be performed in single or repeat mode. Result of the ADC is
22 - renesas,r9a07g043-adc # RZ/G2UL and RZ/Five
23 - renesas,r9a07g044-adc # RZ/G2L
24 - renesas,r9a07g054-adc # RZ/V2L
25 - const: renesas,rzg2l-adc
72 $ref: adc.yaml
75 Represents the external channels which are connected to the ADC.
92 const: renesas,r9a07g043-adc
[all …]
/freebsd/sys/contrib/device-tree/Bindings/input/touchscreen/
H A Dti-tsc-adc.txt1 * TI - TSC ADC (Touschscreen and analog digital converter)
22 remaining 4 can be used by the ADC.
32 - child "adc"
34 "ti,am3359-adc" for AM335x/AM437x SoCs
35 "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
36 ti,adc-channels: List of analog inputs available for ADC.
42 ADC clock cycles. Charge delay value should be large
53 - child "adc"
55 ADC in the order of ti,adc-channels. The
56 value corresponds to the number of ADC
[all …]
H A Dresistive-adc-touch.yaml4 $id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml#
7 title: Generic resistive touchscreen ADC
13 Generic ADC based resistive touchscreen controller
14 The device must be connected to an ADC device that provides channels for
22 const: resistive-adc-touch
68 compatible = "resistive-adc-touch";
69 io-channels = <&adc 24>, <&adc 25>;
74 compatible = "resistive-adc-touch";
76 io-channels = <&adc 24>, <&adc 25>, <&adc 26>;
81 compatible = "resistive-adc-touch";
[all …]
/freebsd/sys/contrib/device-tree/Bindings/iio/
H A Diio-bindings.txt27 adc: voltage-sensor@35 {
36 adc@35 {
37 compatible = "some-vendor,some-adc";
72 io-channels = <&adc 1>, <&ref 0>;
77 The vcc channel is connected to output 1 of the &adc device, and the
82 adc: max1139@35 {
92 io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
93 <&adc 3>, <&adc 4>, <&adc 5>,
94 <&adc 6>, <&adc 7>, <&adc 8>,
95 <&adc 9>;
[all …]
/freebsd/sys/contrib/device-tree/src/arm/aspeed/
H A Daspeed-bmc-intel-s2600wf.dts33 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
34 <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
35 <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
36 <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
H A Daspeed-bmc-supermicro-x11spi.dts34 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
35 <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
36 <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
37 <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
/freebsd/sys/contrib/libsodium/src/libsodium/crypto_scalarmult/curve25519/sandy2x/
H A Dfe51_mul.S46 adc %rdx,%r9 label
50 adc %rdx,%r9 label
70 adc %rdx,%r11 label
74 adc %rdx,%r13 label
78 adc %rdx,%r15 label
82 adc %rdx,%rbp label
87 adc %rdx,%r9 label
91 adc %rdx,%r13 label
95 adc %rdx,%r15 label
99 adc %rdx,%rbp label
[all …]

12345678910>>...44