/linux/Documentation/devicetree/bindings/iio/adc/ |
H A D | ti,ads1119.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Texas Instruments ADS1119 ADC 10 - João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com> 13 The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and 28 reset-gpios: 31 avdd-supply: true 32 dvdd-supply: true [all …]
|
H A D | st,stm32-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectronics STM32 ADC 10 STM32 ADC is a successive approximation analog-to-digital converter. 11 It has several multiplexed input channels. Conversions can be performed 12 in single, continuous, scan or discontinuous mode. Result of the ADC is 13 stored in a left-aligned or right-aligned 32-bit data register. 17 voltage goes beyond the user-defined, higher or lower thresholds. [all …]
|
H A D | adi,ad4130.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: Analog Devices AD4130 ADC device driver 11 - Cosmin Tanislav <cosmin.tanislav@analog.com> 14 Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here: 15 https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf 20 - adi,ad4130 29 clock-names: [all …]
|
H A D | adi,ad4170-4.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Analog Devices AD4170-4 and similar Analog to Digital Converters 10 - Marcelo Schmitt <marcelo.schmitt@analog.com> 13 Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters. 15 https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf 16 https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf 17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf [all …]
|
H A D | microchip,mcp3564.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Microchip MCP346X and MCP356X ADC Family 10 - Marius Cristea <marius.cristea@microchip.com> 13 Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit 14 Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: 16 …s/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181… 18 …ds/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf [all …]
|
H A D | adi,max11410.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: Analog Devices MAX11410 ADC device driver 11 - Ibrahim Tilki <Ibrahim.Tilki@analog.com> 14 Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be 21 - adi,max11410 30 interrupt-names: 34 - enum: [gpio0, gpio1] [all …]
|
H A D | adi,ad4851.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/iio/adc/adi,ad4851.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Sergiu Cuciurean <sergiu.cuciurean@analog.com> 12 - Dragos Bogdan <dragos.bogdan@analog.com> 13 - Antoniu Miclaus <antoniu.miclaus@analog.com> 16 Analog Devices AD485X fully buffered, 8-channel simultaneous sampling, 17 16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide 18 common-mode range inputs. [all …]
|
H A D | adi,ad7292.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Analog Devices AD7292 10-Bit Monitor and Control System 10 - Marcelo Schmitt <marcelo.schmitt1@gmail.com> 13 Analog Devices AD7292 10-Bit Monitor and Control System with ADC, DACs, 17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad7292.pdf 22 - adi,ad7292 27 vref-supply: [all …]
|
H A D | adi,ad7606.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Analog Devices AD7606 Simultaneous Sampling ADC 10 - Michael Hennerich <michael.hennerich@analog.com> 13 Analog Devices AD7606 Simultaneous Sampling ADC 14 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf 15 https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf 16 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf [all …]
|
/linux/Documentation/devicetree/bindings/mux/ |
H A D | adi,adg792a.txt | 4 - compatible : "adi,adg792a" or "adi,adg792g" 5 - #mux-control-cells : <0> if parallel (the three muxes are bound together 8 * Standard mux-controller bindings as described in mux-controller.yaml 11 - gpio-controller : if present, #gpio-cells below is required. 12 - #gpio-cells : should be <2> 13 - First cell is the GPO line number, i.e. 0 or 1 14 - Second cell is used to specify active high (0) 18 - idle-state : if present, array of states that the mux controllers will have 32 mux: mux-controller@50 { 35 #mux-control-cells = <1>; [all …]
|
/linux/Documentation/devicetree/bindings/iio/proximity/ |
H A D | tyhx,hx9023s.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Yasin Lee <yasin.lee.x@gmail.com> 29 vdd-supply: true 31 "#address-cells": 34 "#size-cells": 38 "^channel@[0-4]$": 39 $ref: /schemas/iio/adc/adc.yaml 50 - compatible [all …]
|
/linux/drivers/iio/adc/ |
H A D | ad7380.c | 1 // SPDX-License-Identifier: GPL-2.0-only 9 * ad7380/1 : https://www.analog.com/media/en/technical-documentation/data-sheets/AD7380-7381.pdf 10 * ad7383/4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7383-7384.pdf 11 …* ad7386/7/8 : https://www.analog.com/media/en/technical-documentation/data-sheets/AD7386-7387-738… 12 * ad7380-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7380-4.pdf 13 * ad7381-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7381-4.pdf 14 …* ad7383/4-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7383-4-ad7384… 15 …* ad7386/7/8-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7386-4-7387… 16 * ad7389-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7389-4.pdf 17 * adaq4370-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4370-4.pdf [all …]
|
H A D | ad4170-4.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Analog Devices AD4170-4 ADC driver 6 * Author: Ana-Maria Cusco <ana-maria.cusco@analog.com> 17 #include <linux/clk-provider.h> 81 /* AD4170_CONFIG_A_REG - INTERFACE_CONFIG_A REGISTER */ 246 [AD4170_CHAN_SETUP_REG(0) ... AD4170_CHAN_MAP_REG(AD4170_MAX_ADC_CHANNELS - 1)] = 2, 249 * also interleaved but MISC, AFE, FILTER, FILTER_FS, OFFSET are 16-bit 250 * while OFFSET, GAIN are 24-bit registers so we can't init them all to 278 AD4170_REF_BUF_PRE, /* Pre-charge referrence buffer */ 283 /* maps adi,positive/negative-reference-buffer property values to enum */ [all …]
|
H A D | ad7292.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Analog Devices AD7292 SPI ADC driver 94 st->d8[0] = AD7292_RD_FLAG_MSK(addr); in ad7292_spi_reg_read() 96 ret = spi_write_then_read(st->spi, st->d8, 1, &st->d16, 2); in ad7292_spi_reg_read() 100 return be16_to_cpu(st->d16); in ad7292_spi_reg_read() 106 unsigned int shift = 16 - (8 * len); in ad7292_spi_subreg_read() 109 st->d8[0] = AD7292_RD_FLAG_MSK(addr); in ad7292_spi_subreg_read() 110 st->d8[1] = sub_addr; in ad7292_spi_subreg_read() 112 ret = spi_write_then_read(st->spi, st->d8, 2, &st->d16, len); in ad7292_spi_subreg_read() 116 return (be16_to_cpu(st->d16) >> shift); in ad7292_spi_subreg_read() [all …]
|
H A D | ad4030.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Analog Devices AD4030 and AD4630 ADC family driver. 109 #define AD4030_TCYC_ADJUSTED_NS (AD4030_TCYC_NS - AD4030_TCNVL_NS) 112 #define AD4632_TCYC_ADJUSTED_NS (AD4632_TCYC_NS - AD4030_TCNVL_NS) 138 const struct iio_chan_spec channels[AD4030_MAX_IIO_CHANNEL_NB]; member 141 /* Number of hardware channels */ 165 s32 diff; member 169 s32 diff[2]; member 176 * For a chip with 2 hardware channel this will be used to create 2 common-mode 177 * channels: [all …]
|
H A D | max11410.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * MAX11410 SPI ADC driver 142 struct max11410_channel_config *channels; member 175 /* This driver only needs to write 8-bit registers */ in max11410_write_reg() 177 return -EINVAL; in max11410_write_reg() 179 return regmap_write(st->regmap, reg, val); in max11410_write_reg() 188 ret = regmap_bulk_read(st->regmap, reg, &st->scan.data, 3); in max11410_read_reg() 192 *val = get_unaligned_be24(&st->scan.data); in max11410_read_reg() 196 return regmap_read(st->regmap, reg, val); in max11410_read_reg() 204 return st->avdd; in max11410_get_vrefp() [all …]
|
H A D | ad7606.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * AD7606 SPI ADC driver 103 -128, 1, 127, 107 -512, 4, 508, 135 .name = "ad7605-4", 144 .name = "ad7606-8", 155 .name = "ad7606-6", 167 .name = "ad7606-4", 278 if (st->gpio_reset) { in ad7606_reset() 279 gpiod_set_value(st->gpio_reset, 1); in ad7606_reset() [all …]
|
H A D | ad7192.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * AD7192 and similar SPI ADC driver 5 * Copyright 2011-2015 Analog Devices Inc. 12 #include <linux/clk-provider.h> 33 #include <linux/iio/adc/ad_sigma_delta.h> 36 #define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */ 37 #define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */ 38 #define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */ 39 #define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */ 40 #define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */ [all …]
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am62p-verdin-ivy.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 7 * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p 8 * https://www.toradex.com/products/carrier-board/ivy-carrier-board 11 #include <dt-bindings/mux/mux.h> 12 #include <dt-bindings/leds/common.h> 13 #include <dt-bindings/net/ti-dp83867.h> 21 ain1_voltage_unmanaged: voltage-divider-ain1 { 22 compatible = "voltage-divider"; 23 #io-channel-cells = <1>; 24 io-channels = <&ivy_adc1 0>; [all …]
|
/linux/drivers/iio/addac/ |
H A D | stx104.c | 1 // SPDX-License-Identifier: GPL-2.0-only 30 #define STX104_IN_CHAN(chan, diff) { \ argument 38 .differential = diff \ 64 /* ADC Channel */ 70 /* ADC Status */ 75 /* ADC Control */ 79 /* ADC Configuration */ 90 * struct stx104_iio - IIO device private data structure 211 err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config); in stx104_read_raw() 218 if (chan->output) { in stx104_read_raw() [all …]
|
/linux/drivers/comedi/drivers/ |
H A D | amplc_pci230.c | 1 // SPDX-License-Identifier: GPL-2.0+ 8 * COMEDI - Linux Control and Measurement Device Interface 35 * --------- --------- 43 * The AI subdevice has 16 single-ended channels or 8 differential 44 * channels. 46 * The PCI230 and PCI260 cards have 12-bit resolution. The PCI230+ and 47 * PCI260+ cards have 16-bit resolution. 51 * or PCI260 then it actually uses a "pseudo-differential" mode where the 62 * 0 => [-10, +10] V 63 * 1 => [-5, +5] V [all …]
|
H A D | ni_daq_700.c | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Driver for DAQCard-700 DIO/AI 7 * COMEDI - Linux Control and Measurement Device Interface 13 * Description: National Instruments PCMCIA DAQCard-700 16 * Devices: [National Instruments] PCMCIA DAQ-Card-700 (ni_daq_700) 20 * The daqcard-700 appears in Comedi as a digital I/O subdevice (0) with 21 * 16 channels and a analog input subdevice (1) with 16 single-ended channels 22 * or 8 differential channels, and three input ranges. 24 * Digital: The channel 0 corresponds to the daqcard-700's output 27 * Digital direction configuration: channels 0-7 output, 8-15 input. [all …]
|
H A D | usbduxsigma.c | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Copyright (C) 2011-2015 Bernd Porr, mail@berndporr.me.uk 10 * Devices: [ITL] USB-DUX-SIGMA (usbduxsigma) 18 * wrote the driver for AT-MIO-16d. I used some parts of this 33 * 0.7: rewrite code that urb->interval is always 1 45 /* timeout for the USB-transfer in ms*/ 64 /* Number of channels (16 AD and offset)*/ 71 * Size of the async input-buffer IN BYTES, the DIO state is transmitted 79 /* Number of DA channels */ 86 * Size of the output-buffer in bytes [all …]
|
/linux/drivers/input/keyboard/ |
H A D | sun4i-lradc-keys.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * Allwinner sun4i low res adc attached tablet keys driver 13 * There are 2 channels, currently this driver only supports channel 0 since 62 /* struct lradc_variant - Describe sun4i-a10-lradc-keys hardware variant 111 u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; in sun4i_lradc_irq() local 113 ints = readl(lradc->base + LRADC_INTS); in sun4i_lradc_irq() 121 input_report_key(lradc->input, lradc->chan0_keycode, 0); in sun4i_lradc_irq() 122 lradc->chan0_keycode = 0; in sun4i_lradc_irq() 125 if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { in sun4i_lradc_irq() 126 val = readl(lradc->base + LRADC_DATA0) & 0x3f; in sun4i_lradc_irq() [all …]
|
/linux/sound/soc/codecs/ |
H A D | ad1836.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 * Copyright 2009-2011 Analog Devices Inc. 38 * AD1836 volume/mute/de-emphasis etc. controls 54 SOC_DOUBLE("ADC" #x " Capture Switch", AD1836_ADC_CTRL2, \ 94 { "ADC", NULL, "ADC1IN" }, 95 { "ADC", NULL, "ADC2IN" }, 99 /* ADC high-pass filter */ 100 SOC_SINGLE("ADC High Pass Filter Switch", AD1836_ADC_CTRL1, 103 /* DAC de-emphasis */ 110 SND_SOC_DAPM_ADC("ADC", "Capture", SND_SOC_NOPM, 0, 0), [all …]
|