| /freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | imx8mp-toradex-smarc.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 4 #include <dt-bindings/phy/phy-imx8-pcie.h> 5 #include <dt-bindings/net/ti-dp83867.h> 26 stdout-path = &uart4; 30 compatible = "gpio-usb-b-connector", "usb-b-connector"; 31 pinctrl-names = "default"; 32 pinctrl-0 = <&pinctrl_usb0_id>; 33 id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; 35 self-powered; 37 vbus-supply = <®_usb0_vbus>; [all …]
|
| H A D | imx8mp-toradex-smarc-dev.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT 4 /dts-v1/; 6 #include <dt-bindings/pwm/pwm.h> 8 #include "imx8mp-toradex-smarc.dtsi" 11 model = "Toradex SMARC iMX8M Plus on Toradex SMARC Development Board"; 12 compatible = "toradex,smarc-imx8mp-dev", 13 "toradex,smarc-imx8mp", 16 hdmi-connector { 17 compatible = "hdmi-connector"; 23 remote-endpoint = <&hdmi_tx_out>; [all …]
|
| H A D | imx8qxp-tqma8xqps-mb-smarc-2.dts | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) 3 * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, 4 * D-82229 Seefeld, Germany. 8 /dts-v1/; 10 #include "imx8qxp-tqma8xqps.dtsi" 11 #include "tqma8xxs-mb-smarc-2.dtsi" 14 model = "TQ-Systems i.MX8QXP TQMa8XQPS on MB-SMARC-2"; 15 compatible = "tq,imx8qxp-tqma8xqps-mb-smarc-2", "tq,imx8qxp-tqma8xqps", "fsl,imx8qxp";
|
| H A D | imx8dxp-tqma8xdps-mb-smarc-2.dts | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) 3 * Copyright (c) 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>, 4 * D-82229 Seefeld, Germany. 8 /dts-v1/; 10 #include "imx8dxp-tqma8xdps.dtsi" 11 #include "tqma8xxs-mb-smarc-2.dtsi" 14 model = "TQ-Systems i.MX8DXP TQMa8XDPS on MB-SMARC-2"; 15 compatible = "tq,imx8dxp-tqma8xdps-mb-smarc-2", "tq,imx8dxp-tqma8xdps", "fsl,imx8dxp";
|
| H A D | fsl-ls1028a-kontron-sl28-var3-ads2.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0 10 /dts-v1/; 12 #include <dt-bindings/clock/fsl,qoriq-clockgen.h> 13 #include "fsl-ls1028a-kontron-sl28-var3.dts" 16 model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier"; 17 compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3", 20 pwm-fan { 21 compatible = "pwm-fan"; 22 #cooling-cells = <2>; [all …]
|
| H A D | imx8mp-kontron-smarc-eval-carrier.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR MIT 6 /dts-v1/; 8 #include <dt-bindings/phy/phy-imx8-pcie.h> 9 #include "imx8mp-kontron-smarc.dtsi" 12 model = "Kontron SMARC Eval Carrier with i.MX8MP"; 13 compatible = "kontron,imx8mp-smarc-eval-carrier", "kontron,imx8mp-smarc", 14 "kontron,imx8mp-osm-s", "fsl,imx8mp"; 17 compatible = "pwm-backlight"; 19 brightness-levels = <0 100>; 20 num-interpolated-steps = <100>; [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/power/reset/ |
| H A D | toradex,smarc-ec.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/power/reset/toradex,smarc-ec.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Emanuele Ghidoli <emanuele.ghidoli@toradex.com> 11 - Francesco Dolcini <francesco.dolcini@toradex.com> 14 The Toradex Embedded Controller (EC) is used on Toradex SMARC modules, 18 - Reads the SMARC POWER_BTN# and RESET_IN# signals and controls the PMIC accordingly. 19 - Controls the SoC boot mode signals based on the SMARC BOOT_SEL# and FORCE_RECOV# inputs. 20 - Manages the CARRIER_STDBY# signal in response to relevant SoC signals. [all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/renesas/ |
| H A D | r9a07g054l2-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/V2L SMARC EVK board 8 /dts-v1/; 37 #include "rzg2l-smarc-som.dtsi" 38 #include "rzg2l-smarc-pinfunction.dtsi" 39 #include "rz-smarc-common.dtsi" 40 #include "rzg2l-smarc.dtsi" 43 model = "Renesas SMARC EVK based on r9a07g054l2"; 44 compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
|
| H A D | r9a07g044l2-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G2L SMARC EVK board 8 /dts-v1/; 38 #include "rzg2l-smarc-som.dtsi" 39 #include "rzg2l-smarc-pinfunction.dtsi" 40 #include "rz-smarc-common.dtsi" 41 #include "rzg2l-smarc.dtsi" 44 model = "Renesas SMARC EVK based on r9a07g044l2"; 45 compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
|
| H A D | r9a07g043u11-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board 8 /dts-v [all...] |
| H A D | r9a07g044c2-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G2LC SMARC EVK board 8 /dts-v1/; 11 * DIP-Switch SW1 setting on SoM 13 * SW1-2 : SW_SD0_DEV_SEL (1: eMMC; 0: uSD) 14 * SW1-3 : SW_SCIF_CAN (1: CAN1; 0: SCIF1) 15 * SW1-4 : SW_RSPI_CAN (1: CAN1; 0: RSPI1) 16 * SW1-5 : SW_I2S0_I2S1 (1: I2S2 (HDMI audio); 0: I2S0) 40 * - Set DIP-Switch SW1-4 to Off position. 41 * - Set SW_RSPI_CAN macro to 0. [all …]
|
| H A D | rzg3s-smarc-switches.h | 1 /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ 3 * On-board switches for the Renesas RZ/G3S SMARC Module and RZ SMARC Carrier II 13 * On-board switches' states: 23 * SW_OFF - SD0 is connected to eMMC 24 * SW_ON - SD0 is connected to uSD0 card 26 * SW_OFF - SD2 is connected to SoC 27 * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC 35 * SW_OFF - The SMARC SER0 signals are routed to M.2 Key E UART 36 * SW_ON - The SMARC SER0 signals are routed to PMOD1
|
| H A D | renesas-smarc2.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ SMARC Carrier-II Board. 13 * 0 - SMARC SDIO signal is connected to uSD1 14 * 1 - SMARC SDIO signal is connected to M.2 Key E connector 20 * 0 - Connect to GPIO8 PMOD (default) 21 * 1 - Connect to CAN0 transceiver STB pin 24 * 0 - Connect to GPIO9 PMOD (default) 25 * 1 - Connect to CAN1 transceiver STB pin 32 model = "Renesas RZ SMARC Carrier-II Board"; 33 compatible = "renesas,smarc2-evk"; [all …]
|
| H A D | r9a08g045s33-smarc-pmod1-type-3a.dtso | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G3S SMARC Carrier II EVK PMOD parts 10 * SMARC Carrier II EVK 11 * +--------------------------------------------+ 19 * +--------------------------------------------+ 22 * - SW_CONFIG2: ON 23 * - SW_OPT_MUX4: ON 26 /dts-v1/; 29 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 30 #include "rzg3s-smarc-switches.h" [all …]
|
| H A D | rzg2ul-smarc.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts 8 #include <dt-bindings/gpio/gpio.h> 9 #include "rzg2ul-smarc-pinfunction.dtsi" 10 #include "rz-smarc-common.dtsi" 14 /delete-property/ pinctrl-0; 15 /delete-property/ pinctrl-names; 21 sound-dai = <&ssi1>; 25 clock-frequency = <400000>; 30 gpio-controller; [all …]
|
| H A D | r9a07g044l2-smarc-cru-csi-ov5645.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera 9 /dts-v1/; 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 16 #include "rz-smarc-cru-csi-ov5645.dtsi" 19 enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>; 20 reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
|
| H A D | r9a07g054l2-smarc-cru-csi-ov5645.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera 9 /dts-v1/; 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 16 #include "rz-smarc-cru-csi-ov5645.dtsi" 19 enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>; 20 reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
|
| H A D | r9a07g044c2-smarc-cru-csi-ov5645.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree overlay for the RZ/G2LC SMARC EVK with 9 /dts-v1/; 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 16 #include "rz-smarc-cru-csi-ov5645.dtsi" 19 enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>; 20 reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>;
|
| H A D | r9a07g043-smarc-pmod.dtso | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts 10 * SMARC EVK 11 * +----------------------------+ 17 * +----------------------------+ 21 /dts-v1/; 24 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 27 can0-stb-hog { 31 can1-stb-hog { 35 sci0_pins: sci0-pins { [all …]
|
| H A D | r9a09g047e57-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/G3E SMARC EVK board 8 /dts-v1/; 27 #include <dt-bindings/gpio/gpio.h> 28 #include <dt-bindings/input/input.h> 29 #include <dt-bindings/pinctrl/renesas,r9a09g047-pinctrl.h> 31 #include "rzg3e-smarc-som.dtsi" 32 #include "renesas-smarc2.dtsi" 35 model = "Renesas SMARC EVK version 2 based on r9a09g047e57"; 36 compatible = "renesas,smarc2-evk", "renesas,rzg3e-smarcm", [all …]
|
| /freebsd/sys/contrib/device-tree/src/riscv/renesas/ |
| H A D | r9a07g043f01-smarc.dts | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/Five SMARC EVK 8 /dts-v1/; 11 * DIP-Switch SW1 setting 13 * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) 14 * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) 21 #include "rzfive-smarc-som.dtsi" 22 #include "rzfive-smarc.dtsi" 25 model = "Renesas SMARC EVK based on r9a07g043f01"; 26 compatible = "renesas,smarc-evk", "renesas,r9a07g043f01", "renesas,r9a07g043";
|
| H A D | rzfive-smarc-som.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 * Device Tree Source for the RZ/Five SMARC EVK SOM 8 #include <arm64/renesas/rzg2ul-smarc-som.dtsi>
|
| /freebsd/sys/contrib/device-tree/Bindings/soc/renesas/ |
| H A D | renesas.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Renesas SH-Mobile, R-Mobile, and R-Car Platform 10 - Geert Uytterhoeven <geert+renesas@glider.be> 17 - description: Emma Mobile EV2 19 - enum: 20 - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual 21 - const: renesas,emev2 23 - description: RZ/A1H (R7S72100) [all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/arm/ |
| H A D | fsl.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Shawn Guo <shawnguo@kernel.org> 17 - description: i.MX1 based Boards 19 - enum: 20 - armadeus,imx1-apf9328 21 - fsl,imx1ads 22 - const: fsl,imx1 24 - description: i.MX23 based Boards [all …]
|
| H A D | renesas.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Renesas SH-Mobile, R-Mobile, and R-Car Platform 10 - Geert Uytterhoeven <geert+renesas@glider.be> 17 - description: Emma Mobile EV2 19 - enum: 20 - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual 21 - const: renesas,emev2 23 - description: RZ/A1H (R7S72100) [all …]
|