| /freebsd/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | qcom,rpmh-regulator.yaml | 7 title: Qualcomm Technologies, Inc. RPMh Regulators
22 It is used for clock buffers, low-voltage switches, and LDO/SMPS regulators
29 RPMh regulators must be described in two levels of device nodes. The first
30 level describes the PMIC containing the regulators and must reside within an
32 which is to be used on the board. Each of these regulators maps to a single
63 - qcom,pm6150-rpmh-regulators
64 - qcom,pm6150l-rpmh-regulators
65 - qcom,pm6350-rpmh-regulators
66 - qcom,pm660-rpmh-regulators
67 - qcom,pm660l-rpmh-regulators
[all...] |
| H A D | qcom,rpmh-regulator.txt | 1 Qualcomm Technologies, Inc. RPMh Regulators
11 switches, and LDO/SMPS regulators which have a fixed voltage and mode.
17 RPMh regulators must be described in two levels of device nodes. The first
18 level describes the PMIC containing the regulators and must reside within an
20 which is to be used on the board. Each of these regulators maps to a single
45 "qcom,pm8005-rpmh-regulators"
46 "qcom,pm8009-rpmh-regulators"
47 "qcom,pm8009-1-rpmh-regulators"
48 "qcom,pm8150-rpmh-regulators"
49 "qcom,pm8150l-rpmh-regulators"
[all …]
|
| H A D | qcom,spmi-regulator.yaml | 7 title: Qualcomm SPMI Regulators
15 - qcom,pm6125-regulators
16 - qcom,pm660-regulators
17 - qcom,pm660l-regulators
18 - qcom,pm8004-regulators
19 - qcom,pm8005-regulators
20 - qcom,pm8019-regulators
21 - qcom,pm8226-regulators
22 - qcom,pm8841-regulators
23 - qcom,pm8909-regulators
[all...] |
| H A D | qcom,smd-rpm-regulator.yaml | 89 - qcom,rpm-mp5496-regulators
90 - qcom,rpm-pm2250-regulators
91 - qcom,rpm-pm6125-regulators
92 - qcom,rpm-pm660-regulators
93 - qcom,rpm-pm660l-regulators
94 - qcom,rpm-pm8226-regulators
95 - qcom,rpm-pm8841-regulators
96 - qcom,rpm-pm8909-regulators
97 - qcom,rpm-pm8916-regulators
98 - qcom,rpm-pm8937-regulators
[all...] |
| H A D | qcom,spmi-regulator.txt | 1 Qualcomm SPMI Regulators
7 "qcom,pm8004-regulators"
8 "qcom,pm8005-regulators"
9 "qcom,pm8226-regulators"
10 "qcom,pm8841-regulators"
11 "qcom,pm8916-regulators"
12 "qcom,pm8941-regulators"
13 "qcom,pm8950-regulators"
14 "qcom,pm8994-regulators"
15 "qcom,pmi8994-regulators"
[all …]
|
| H A D | tps65217.txt | 1 TPS65217 family of regulators
6 - regulators: list of regulators provided by this controller, must be named
8 - regulators: This is the list of child nodes that specify the regulator
9 initialization data for defined regulators. Not all regulators for the given
11 using the standard binding for regulators found at
17 The valid names for regulators are:
20 Each regulator is defined using the standard binding for regulators.
28 regulators {
|
| H A D | tps65023.txt | 1 TPS65023 family of regulators
9 - regulators: list of regulators provided by this controller, must be named
11 - regulators: This is the list of child nodes that specify the regulator
12 initialization data for defined regulators. The definition for each of
13 these nodes is defined using the standard binding for regulators found at
16 Each regulator is defined using the standard binding for regulators.
24 regulators {
|
| H A D | max77802.txt | 1 Binding for Maxim MAX77802 regulators
7 regulators that can be controlled over I2C.
33 - regulators : The regulators of max77802 have to be instantiated
34 under subnode named "regulators" using the following format.
51 Power Mode. Some regulators support the modes to be changed at startup or by
56 The regulators that support the standard "regulator-initial-mode" property,
66 The standard "regulator-mode" property can only be used for regulators that
67 support changing their mode to Low Power Mode during suspend. These regulators
84 regulators {
|
| H A D | pfuze100.yaml | 7 title: PFUZE100 family of regulators
13 The valid names for regulators are:
23 Each regulator is defined using the standard binding for regulators.
45 Boolean, if present disable all unused switch regulators to save power
46 consumption. Attention, ensure that all important regulators
48 If not present, the switched regulators are always on and can't be
50 with old dtb's which rely on the fact that the switched regulators are
62 regulators:
65 list of regulators provided by this controller.
106 regulators {
[all...] |
| H A D | slg51000.txt | 7 These entries are required if regulators are enabled for a device.
24 - regulators : This node defines the settings for the regulators.
26 for regulators; see regulator.txt.
28 The SLG51000 regulators are bound using their names listed below:
37 Optional properties for regulators:
45 regulators {
|
| H A D | max77686.txt | 1 Binding for Maxim MAX77686 regulators
7 regulators that can be controlled over I2C.
12 - voltage-regulators : The regulators of max77686 have to be instantiated
13 under subnode named "voltage-regulators" using the following format.
29 Regulators which can be turned off during system suspend:
49 voltage-regulators {
|
| H A D | da9211.txt | 9 - regulators: A node that houses a sub-node for each regulator within the
12 standard binding for regulators; see regulator.txt.
27 regulators {
47 regulators {
73 regulators {
91 regulators {
109 regulators {
135 regulators {
161 regulators {
187 regulators {
|
| H A D | tps65218.txt | 1 TPS65218 family of regulators
7 - List of regulators provided by this controller, must be named
10 initialization data for defined regulators. Not all regulators for the given
12 using the standard binding for regulators found at ./regulator.txt.
14 The valid names for regulators are:
17 Each regulator is defined using the standard binding for regulators.
|
| H A D | qcom,smd-rpm-regulator.txt | 22 "qcom,rpm-pm8841-regulators"
23 "qcom,rpm-pm8916-regulators"
24 "qcom,rpm-pm8941-regulators"
25 "qcom,rpm-pm8950-regulators"
26 "qcom,rpm-pm8994-regulators"
27 "qcom,rpm-pm8998-regulators"
28 "qcom,rpm-pma8084-regulators"
29 "qcom,rpm-pmi8994-regulators"
30 "qcom,rpm-pmi8998-regulators"
31 "qcom,rpm-pms405-regulators"
[all …]
|
| H A D | pfuze100.txt | 1 PFUZE100 family of regulators
9 regulators to save power consumption. Attention, ensure that all important
10 regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
11 property. If not present, the switched regulators are always on and can't be
13 old dtb's which rely on the fact that the switched regulators are always on
22 - regulators: This is the list of child nodes that specify the regulator
23 initialization data for defined regulators. Please refer to below doc
26 The valid names for regulators are:
36 Each regulator is defined using the standard binding for regulators.
44 regulators {
[all …]
|
| H A D | qcom,rpm-regulator.yaml | 42 - qcom,rpm-pm8058-regulators
43 - qcom,rpm-pm8901-regulators
44 - qcom,rpm-pm8921-regulators
45 - qcom,rpm-pm8018-regulators
46 - qcom,rpm-smb208-regulators
53 description: List of regulators and its properties
105 regulators {
106 compatible = "qcom,rpm-pm8921-regulators";
|
| H A D | nxp,pf8x00-regulator.yaml | 7 title: NXP PF8100/PF8121A/PF8200 PMIC regulators
16 linear and one vsnvs regulators. It has built-in one time programmable
29 regulators:
32 list of regulators provided by this controller
56 BUCK regulators current limit in mA.
71 BUCK regulators phase shift control in degrees.
89 - regulators
103 regulators {
|
| H A D | mt6311-regulator.txt | 6 - regulators: List of regulators provided by this controller. It is named
9 for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
11 The valid names for regulators are:
22 regulators {
|
| /freebsd/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | samsung,s2mps11.yaml | 17 which include voltage and current regulators, RTC, clock outputs and other
40 regulators:
43 List of child nodes that specify the regulators.
65 - regulators
77 regulators:
88 regulators:
99 regulators:
111 regulators:
123 regulators:
153 regulators {
[all …]
|
| H A D | max8998.txt | 4 regulators, real time clock, battery charging controller and several
11 The PMIC sub-block contains a number of voltage and current regulators,
51 Regulators: All the regulators of MAX8998 to be instantiated shall be
52 listed in a child node named 'regulators'. Each regulator is represented
53 by a child node of the 'regulators' node.
59 Following regulators of the MAX8998 PMIC block are supported. Note that
102 /* Regulators to instantiate */
103 regulators {
|
| H A D | tps6507x.txt | 6 - regulators: This is the list of child nodes that specify the regulator
7 initialization data for defined regulators. Not all regulators for the
9 is defined using the standard binding for regulators found at
16 These entries are required if regulators are enabled for a device.
28 - defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
43 regulators {
|
| /freebsd/sys/contrib/device-tree/include/dt-bindings/regulator/ |
| H A D | qcom,rpmh-regulator.h | 14 * by LDO and SMPS type regulators.
17 * and BOB type regulators. This mode is supported
19 * regulators.
24 * regulators.
28 * regulators. This mode is supported by all types
29 * of regulators.
|
| H A D | active-semi,8865-regulator.h | 3 * Device Tree binding constants for the ACT8865 PMIC regulators
11 * ACT8865 regulators as follows:
12 * ACT8865_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
16 * ACT8865_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
19 * ACT8865_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
|
| H A D | active-semi,8945a-regulator.h | 5 * Device Tree binding constants for the ACT8945A PMIC regulators
13 * ACT8945A regulators as follows:
14 * ACT8945A_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
18 * ACT8945A_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
21 * ACT8945A_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
|
| /freebsd/sys/contrib/device-tree/Bindings/opp/ |
| H A D | opp-v2-base.yaml | 69 Entries for multiple regulators shall be provided in the same field separated
75 Entries for all regulators shall be of the same size, i.e. either all use a
78 maxItems: 8 # Should be enough regulators
93 Entries for multiple regulators shall be provided in the same field
96 aren't required for any of the regulators, then this field is not
102 maxItems: 8 # Should be enough regulators
108 Entries for multiple regulators shall be provided in the same field
111 aren't required for any of the regulators, then this field is not
117 maxItems: 8 # Should be enough regulators
218 maxItems: 8 # Should be enough regulators
[all …]
|