/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap5-uevm.dts | 7 #include "omap5-board-common.dtsi" 10 model = "TI OMAP5 uEVM board"; 11 compatible = "ti,omap5-uevm", "ti,omap5"; 45 label = "omap5:blue:usr1"; 75 label = "omap5:red:led"; 82 label = "omap5:green:led"; 89 label = "omap5:blue:led"; 96 label = "omap5:green:led1"; 103 label = "omap5:green:led2"; 110 label = "omap5:green:led3"; [all …]
|
H A D | omap5.dtsi | 12 #include <dt-bindings/clock/omap5.h> 18 compatible = "ti,omap5"; 89 #include "omap5-gpu-thermal.dtsi" 90 #include "omap5-core-thermal.dtsi" 130 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; 156 compatible = "ti,omap5-l3-noc"; 257 compatible = "ti,omap5-dsp"; 262 firmware-name = "omap5-dsp-fw.xe64T"; 268 compatible = "ti,omap5-ipu"; 274 firmware-name = "omap5-ipu-fw.xem4"; [all …]
|
H A D | Makefile | 166 omap5-cm-t54.dtb \ 167 omap5-igep0050.dtb \ 168 omap5-sbc-t54.dtb \ 169 omap5-uevm.dtb
|
H A D | omap5-igep0050.dts | 8 #include "omap5-board-common.dtsi" 12 compatible = "isee,omap5-igep0050", "ti,omap5";
|
/linux/Documentation/devicetree/bindings/display/ti/ |
H A D | ti,omap5-dss.txt | 1 Texas Instruments OMAP5 Display Subsystem 11 - compatible: "ti,omap5-dss" 32 - compatible: "ti,omap5-dispc" 48 - compatible: "ti,omap5-rfbi" 63 - compatible: "ti,omap5-dsi" 85 - compatible: "ti,omap5-hdmi"
|
/linux/Documentation/devicetree/bindings/opp/ |
H A D | ti,omap-opp-supply.yaml | 10 OMAP5, DRA7, and AM57 families of SoCs have Class 0 AVS eFuse 37 - description: OMAP5+ optimized voltages in efuse(Class 0) VDD along with 39 const: ti,omap5-opp-supply 40 - description: OMAP5+ optimized voltages in efuse(class0) VDD but no VBB 41 const: ti,omap5-core-opp-supply 93 compatible = "ti,omap5-opp-supply";
|
/linux/Documentation/devicetree/bindings/arm/omap/ |
H A D | mpu.txt | 10 Should be "ti,omap5-mpu" for OMAP5 25 - For an OMAP5 SMP system: 28 compatible = "ti,omap5-mpu";
|
H A D | prcm.txt | 21 "ti,omap5-prm" 22 "ti,omap5-cm-core-aon" 23 "ti,omap5-scrm" 24 "ti,omap5-cm-core"
|
H A D | l4.txt | 12 Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus 13 Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
|
H A D | ctrl.txt | 26 "ti,omap5-scm-core" 27 "ti,omap5-scm-padconf-core" 28 "ti,omap5-scm-wkup-pad-conf"
|
H A D | dmm.txt | 11 Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
|
H A D | l3-noc.txt | 9 Should be "ti,omap5-l3-noc" for OMAP5 family
|
/linux/Documentation/devicetree/bindings/remoteproc/ |
H A D | ti,omap-remoteproc.yaml | 43 - ti,omap5-dsp 46 - ti,omap5-ipu 109 processors that have them (OMAP4/OMAP5 DSPs do not have 132 This property is required for all the DSP instances on OMAP4, OMAP5 194 - ti,omap5-ipu 258 //Example 2: OMAP5 IPU 261 #include <dt-bindings/clock/omap5.h> 279 compatible = "ti,omap5-ipu"; 289 firmware-name = "omap5-ipu-fw.xem4";
|
/linux/Documentation/devicetree/bindings/regulator/ |
H A D | pbias-regulator.txt | 9 - should be "ti,pbias-omap5" for OMAP5 17 pbias_mmc_omap5 for OMAP5 and DRA7 SoC
|
/linux/Documentation/devicetree/bindings/arm/ti/ |
H A D | omap.yaml | 168 - description: TI OMAP5 SoC based platforms 171 - compulab,omap5-cm-t54 172 - isee,omap5-igep0050 173 - ti,omap5-uevm 174 - const: ti,omap5
|
/linux/sound/soc/ti/ |
H A D | Kconfig | 49 OMAP4 and OMAP5. 65 OMAP4 and OMAP5. 124 - OMAP5 uEVM
|
/linux/drivers/thermal/ti-soc-thermal/ |
H A D | Kconfig | 52 bool "Texas Instruments OMAP5 thermal support" 57 OMAP5 SoC family. The current chip supported are:
|
/linux/Documentation/devicetree/bindings/mmc/ |
H A D | sdhci-omap.txt | 11 Should be "ti,omap5-sdhci" for omap5 controllers
|
/linux/drivers/video/fbdev/omap2/omapfb/dss/ |
H A D | Kconfig | 59 bool "HDMI support for OMAP5" 62 HDMI Interface for OMAP5 and similar cores. This adds the High
|
/linux/drivers/phy/ti/ |
H A D | Kconfig | 59 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
|
/linux/drivers/gpu/drm/omapdrm/ |
H A D | Kconfig | 79 bool "HDMI support for OMAP5" 83 HDMI Interface for OMAP5 and similar cores. This adds the High
|
/linux/include/linux/platform_data/ |
H A D | emif_plat.h | 24 * EMIF4D5 - Used in OMAP5 32 * INTELLIPHY - Used in OMAP5
|
/linux/Documentation/devicetree/bindings/phy/ |
H A D | ti-phy.txt | 9 e.g. USB2_PHY on OMAP5. 11 e.g. USB3 PHY and SATA PHY on OMAP5.
|
/linux/arch/arm/mach-omap2/ |
H A D | Kconfig | 48 bool "TI OMAP5" 121 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
|
/linux/drivers/gpu/drm/omapdrm/dss/ |
H A D | hdmi_wp.c | 173 * On OMAP4 and OMAP5 ES1 the HSW field is programmed as is. On OMAP5 in hdmi_wp_video_config_timing() 175 * However, we don't support OMAP5 ES1 at all, so we can just check for in hdmi_wp_video_config_timing()
|