| /linux/arch/powerpc/crypto/ |
| H A D | aesp8-ppc.pl | 2 # SPDX-License-Identifier: GPL-2.0
12 # Copyright (c) 2006-2017, CRYPTOGAMS by <appro@openssl.org>
58 # The module is endian-agnostic in sense that it supports both big-
59 # and little-endian cases. Data alignment in parallelizable modes is
64 # is aligned programmatically, which in turn guarantees exception-
72 # Add XTS subroutine, 9x on little- and 12x improvement on big-endian
76 # Current large-block performance in cycles per byte processed with
77 # 128-bit key (less is better).
79 # CBC en-/decrypt CTR XTS
106 ( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
[all …]
|
| /linux/Documentation/hwmon/ |
| H A D | w83795.rst | 10 Addresses scanned: I2C 0x2c - 0x2f
18 Addresses scanned: I2C 0x2c - 0x2f
23 - Wei Song (Nuvoton)
24 - Jean Delvare <jdelvare@suse.de>
28 -----------
35 - W83795G
46 19 VSEN7 16h in6
47 20 VSEN8 17h in7
94 - W83795ADG
105 16 VSEN7 16h in6
[all …]
|
| H A D | w83792d.rst | 10 Addresses scanned: I2C 0x2c - 0x2f
19 -----------------
35 -----------
42 parameter; this will put it into a more well-behaved state first.
48 The driver also implements up to seven fan control outputs: pwm1-7. Pwm1-7
53 Automatic fan control mode is possible only for fan1-fan3.
90 12 in6
97 19 in7
116 ----------------
118 - This driver is only for Winbond W83792D C version device, there
[all …]
|
| H A D | powr1220.rst | 19 -----------
26 Voltages are sampled by a 12-bit ADC with a step size of 2 mV.
27 An in-line attenuator allows measurements from 0 to 6 V. The
43 in6 VMON7
44 in7 VMON8
|
| H A D | dme1737.rst | 18 Addresses scanned: none, address read from Super-I/O config space
34 Addresses scanned: none, address read from Super-I/O config space
43 -----------------
52 Include non-standard LPC addresses 0x162e and 0x164e
55 - VIA EPIA SN18000
59 -----------
63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
65 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
[all …]
|
| H A D | lm87.rst | 10 Addresses scanned: I2C 0x2c - 0x2e
18 Addresses scanned: I2C 0x2c - 0x2e
24 - Frodo Looijaard <frodol@dds.nl>,
25 - Philip Edelbrock <phil@netroedge.com>,
26 - Mark Studebaker <mdsxyz123@yahoo.com>,
27 - Stephen Rousset <stephen.rousset@rocketlogix.com>,
28 - Dan Eaton <dan.eaton@rocketlogix.com>,
29 - Jean Delvare <jdelvare@suse.de>,
30 - Original 2.6 port Jeff Oliver
33 -----------
[all …]
|
| H A D | f71805f.rst | 44 -----------
57 The Fintek F71806F/FG Super-I/O chip is essentially the same as the
65 ------------------
67 Voltages are sampled by an 8-bit ADC with a LSB of 8 mV. The supported
84 in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
89 in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
90 in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_
111 --------------
113 Fan rotation speeds are reported as 12-bit values from a gated clock
119 The chip assumes 2 pulse-per-revolution fans.
[all …]
|
| H A D | w83791d.rst | 10 Addresses scanned: I2C 0x2c - 0x2f
12 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf
22 - Frodo Looijaard <frodol@dds.nl>,
23 - Philip Edelbrock <phil@netroedge.com>,
24 - Mark Studebaker <mdsxyz123@yahoo.com>
28 - Shane Huang (Winbond),
29 - Rudolf Marek <r.marek@assembler.cz>
33 - Sven Anders <anders@anduras.de>
34 - Marc Hulsman <m.hulsman@tudelft.nl>
37 -----------------
[all …]
|
| H A D | pc87360.rst | 22 -----------------
27 - 0: None
28 - **1**: Forcibly enable internal voltage and temperature channels,
30 - 2: Forcibly enable all voltage and temperature channels, except in9
31 - 3: Forcibly enable all voltage and temperature channels, including in9
42 -----------
56 PC87360 - 2 2 - 0xE1
57 PC87363 - 2 2 - 0xE8
58 PC87364 - 3 3 - 0xE4
60 PC87366 11 3 3 3-4 0xE9
[all …]
|
| H A D | w83781d.rst | 10 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
12 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
18 Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
28 Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
34 Addresses scanned: I2C 0x28 - 0x2f
42 - Frodo Looijaard <frodol@dds.nl>,
43 - Philip Edelbrock <phil@netroedge.com>,
44 - Mark Studebaker <mdsxyz123@yahoo.com>
47 -----------------
67 -----------
[all …]
|
| H A D | it87.rst | 174 - Christophe Gauthron
175 - Jean Delvare <jdelvare@suse.de>
179 -----------------
192 misconfigured by BIOS - PWM values would be inverted. This option tries
209 Provided since there are reports that system-wide acpi_enfore_resources=lax
217 -------------------
219 All the chips supported by this driver are LPC Super-I/O chips, accessed
220 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
228 -----------
247 is stored in the Super-I/O configuration space. Due to technical limitations,
[all …]
|
| /linux/arch/sh/boards/mach-sdk7786/ |
| H A D | gpio.c | 1 // SPDX-License-Identifier: GPL-2.0
19 "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
34 .label = "sdk7786-fpga",
38 .base = -1, /* don't care */
|
| /linux/drivers/media/pci/cx18/ |
| H A D | cx18-av-core.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
5 * Derived from cx25840-core.h
14 #include <media/v4l2-device.h>
15 #include <media/v4l2-ctrls.h>
20 /* Composite video inputs In1-In8 */
30 /* S-Video inputs consist of one luma input (In1-In8) ORed with one
31 chroma input (In5-In8) */
46 /* S-Video aliases for common luma/chroma combinations */
52 /* Component Video inputs consist of one luma input (In1-In8) ORed
53 with a red chroma (In4-In6) and blue chroma input (In7-In8) */
[all …]
|
| /linux/drivers/regulator/ |
| H A D | max8907-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * max8907-regulator.c -- support regulators in max8907
5 * Copyright (C) 2010 Gyungoh Yoo <jack.yoo@maxim-ic.com>
6 * Copyright (C) 2010-2012, NVIDIA CORPORATION. All rights reserved.
8 * Portions based on drivers/regulator/tps65910-regulator.c,
51 .n_voltages = ((max) - (min)) / (step) + 1, \
94 .n_voltages = ((max) - (min)) / (step) + 1, \
150 REG_LDO(SD1, "in-v1", MAX8907_REG_SDCTL1, 650000, 2225000, 25000),
151 REG_LDO(SD2, "in-v2", MAX8907_REG_SDCTL2, 637500, 1425000, 12500),
152 REG_LDO(SD3, "in-v3", MAX8907_REG_SDCTL3, 750000, 3900000, 50000),
[all …]
|
| /linux/drivers/iio/adc/ |
| H A D | palmas_gpadc.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * palmas-adc.c -- TI PALMAS GPADC.
26 #define MOD_NAME "palmas-gpadc"
29 #define PALMAS_GPADC_TRIMINVALID -1
66 PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false),
67 PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false),
90 * struct palmas_gpadc - the palmas_gpadc structure
110 * This is the palmas_gpadc structure to store run-time information
135 if (adc_chan == adc->event0.channel && dir == adc->event0.direction) in palmas_gpadc_get_event()
136 return &adc->event0; in palmas_gpadc_get_event()
[all …]
|
| /linux/drivers/hwmon/ |
| H A D | lm87.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
9 * Copyright (C) 2004-2008 Jean Delvare <jdelvare@suse.de>
20 * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete
30 * - in0+in5 (default) or temp3
31 * - fan1 (default) or in6
32 * - fan2 (default) or in7
33 * - VID lines (default) or IRQ lines (not handled by this driver)
52 #include <linux/hwmon-sysfs.h>
53 #include <linux/hwmon-vid.h>
105 * The LM87 uses signed 8-bit values for temperatures.
[all …]
|
| H A D | w83792d.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * w83792d.c - Part of lm_sensors, Linux kernel modules for hardware
13 * calculation method to in6-in7(measured value, limits) is a little
30 #include <linux/hwmon-sysfs.h>
153 0x87, /* (bit3-0)SmartFan Fan1 tolerance */
154 0x87, /* (bit7-4)SmartFan Fan2 tolerance */
155 0x97 /* (bit3-0)SmartFan Fan3 tolerance */
174 { 0x88, /* (bit3-0) SmartFanII: Fan1 Non-Stop */
175 0x88, /* (bit7-4) SmartFanII: Fan1 Level 1 */
176 0xE0, /* (bit7-4) SmartFanII: Fan1 Level 2 */
[all …]
|
| H A D | lm85.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * lm85.c - Part of lm_sensors, Linux kernel modules for hardware
7 * Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
9 * Copyright (C) 2007--2014 Jean Delvare <jdelvare@suse.de>
21 #include <linux/hwmon-vid.h>
22 #include <linux/hwmon-sysfs.h>
59 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
61 ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
104 /* IN5, IN6 and IN7 */
105 #define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5))
[all …]
|
| H A D | nct6775-core.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * nct6775 - Driver for the hardware monitoring functionality of
4 * Nuvoton NCT677x Super-I/O chips
6 * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
9 * Copyright (C) 2005-2012 Jean Delvare <jdelvare@suse.de>
14 * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00)
36 * nct6796d-s 18 7 7 6+2 0xd801 0xc1 0x5ca3
37 * nct6799d-r 18 7 7 6+2 0xd802 0xc1 0x5ca3
53 #include <linux/hwmon-sysfs.h>
64 /* used to set data->name = nct6775_device_names[data->sio_kind] */
[all …]
|