| /freebsd/sys/contrib/device-tree/Bindings/memory-controllers/fsl/ |
| H A D | fsl,imx-weim.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Shawn Guo <shawnguo@kernel.org>
11 - Sascha Hauer <s.hauer@pengutronix.de>
16 wireless and mobile applications that use low-power technology. The actual
21 pattern: "^memory-controller@[0-9a-f]+$"
25 - enum:
26 - fsl,imx1-weim
[all …]
|
| /freebsd/sys/arm/broadcom/bcm2835/ |
| H A D | bcm2835_spi.c | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
58 {"broadcom,bcm2835-spi", 1},
59 {"brcm,bcm2835-spi", 1},
74 device_printf(dev, "CS=%b\n", reg, in bcm_spi_printr()
81 reg--; in bcm_spi_printr()
84 device_printf(dev, "CLK=%uMhz/%d=%luhz\n", in bcm_spi_printr()
105 mtx_assert(&sc->sc_mtx, MA_OWNED); in bcm_spi_modifyreg()
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/bus/ |
| H A D | imx-weim.txt | 5 wireless and mobile applications that use low-power technology.
11 - compatible: Should contain one of the following:
12 "fsl,imx1-weim"
13 "fsl,imx27-weim"
14 "fsl,imx51-weim"
15 "fsl,imx50-weim"
16 "fsl,imx6q-weim"
17 - reg: A resource specifier for the register space
19 - clocks: the clock, see the example below.
20 - #address-cells: Must be set to 2 to allow memory address translation
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | marvell,kirkwood-pinctrl.txt | 3 Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
7 - compatible: "marvell,88f6180-pinctrl",
8 "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
9 "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl",
10 "marvell,98dx4122-pinctrl", "marvell,98dx1135-pinctrl"
11 - reg: register specifier of MPP registers
14 It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
24 mpp0 0 gpio, nand(io2), spi(cs)
28 mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
31 mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/spi/ |
| H A D | spi-mt65xx.txt | 4 - compatible: should be one of the following.
5 - mediatek,mt2701-spi: for mt2701 platforms
6 - mediatek,mt2712-spi: for mt2712 platforms
7 - mediatek,mt6589-spi: for mt6589 platforms
8 - mediatek,mt6765-spi: for mt6765 platforms
9 - mediatek,mt7622-spi: for mt7622 platforms
10 - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
11 - mediatek,mt8135-spi: for mt8135 platforms
12 - mediatek,mt8173-spi: for mt8173 platforms
13 - mediatek,mt8183-spi: for mt8183 platforms
[all …]
|
| H A D | spi-davinci.txt | 4 Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
5 dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
6 OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
9 - #address-cells: number of cells required to define a chip select
10 address on the SPI bus. Should be set to 1.
11 - #size-cells: should be zero.
12 - compatible:
13 - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
14 - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
15 - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC
[all …]
|
| H A D | spi-samsung.txt | 3 The Samsung SPI controller is used to interface with various devices such as flash
8 - compatible: should be one of the following.
9 - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
10 - samsung,s3c6410-spi: for s3c6410 platforms
11 - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
12 - samsung,exynos5433-spi: for exynos5433 compatible controllers
13 - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED>
15 - reg: physical base address of the controller and length of memory mapped
18 - interrupts: The interrupt number to the cpu. The interrupt specifier format
21 - dmas : Two or more DMA channel specifiers following the convention outlined
[all …]
|
| H A D | samsung,spi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
19 - enum:
20 - google,gs101-spi
21 - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
22 - samsung,s3c6410-spi
23 - samsung,s5pv210-spi # for S5PV210 and S5PC110
24 - samsung,exynos4210-spi
[all …]
|
| H A D | nuvoton,npcm-pspi.txt | 6 - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX.
7 "nuvoton,npcm845-pspi" for Arbel NPCM8XX.
8 - #address-cells : should be 1. see spi-bus.txt
9 - #size-cells : should be 0. see spi-bus.txt
10 - specifies physical base address and size of the register.
11 - interrupts : contain PSPI interrupt.
12 - clocks : phandle of PSPI reference clock.
13 - clock-names: Should be "clk_apb5".
14 - pinctrl-names : a pinctrl state named "default" must be defined.
15 - pinctrl-0 : phandle referencing pin configuration of the device.
[all …]
|
| /freebsd/sys/riscv/sifive/ |
| H A D | sifive_spi.c | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
44 #include <dev/clk/clk.h>
79 clk_t clk; member
84 #define SFSPI_LOCK(sc) mtx_lock(&(sc)->mtx)
85 #define SFSPI_UNLOCK(sc) mtx_unlock(&(sc)->mtx)
86 #define SFSPI_ASSERT_LOCKED(sc) mtx_assert(&(sc)->mtx, MA_OWNED);
87 #define SFSPI_ASSERT_UNLOCKED(sc) mtx_assert(&(sc)->mtx, MA_NOTOWNED);
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
| H A D | omap2420-n8x0-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
11 stdout-path = &uart3;
16 compatible = "i2c-cbus-gpio";
17 gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
21 #address-cells = <1>;
22 #size-cells = <0>;
25 interrupt-parent = <&gpio4>;
34 clock-frequency = <400000>;
44 clock-frequency = <400000>;
50 /* gpio-irq for dma: 26 */
[all …]
|
| H A D | omap2430-sdp.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
11 compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
20 clock-frequency = <100000>;
24 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
31 vmmc-supply = <&vmmc1>;
32 bus-width = <4>;
39 interrupt-parent = <&gpio5>;
42 bank-width = <2>;
[all …]
|
| H A D | omap3-igep.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only
8 /dts-v1/;
19 stdout-path = &uart3;
23 compatible = "ti,omap-twl4030";
28 vdd33: regulator-vdd33 {
29 compatible = "regulator-fixed";
30 regulator-name = "vdd33";
31 regulator-always-on;
37 gpmc_pins: gpmc-pins {
38 pinctrl-single,pins = <
[all …]
|
| H A D | omap3-gta04a5one.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
6 #include "omap3-gta04a5.dts"
13 gpmc_pins: gpmc-pins {
14 pinctrl-single,pins = <
21 /* data lines, gpmc_d0..d7 not muxable according to TRM */
33 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
42 /* switch inherited setup to OneNAND */
45 pinctrl-names = "default";
46 pinctrl-0 = <&gpmc_pins>;
[all …]
|
| H A D | omap-gpmc-smsc911x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
5 * Note that the board specifc DTS file needs to specify
10 vddvario: regulator-vddvario {
11 compatible = "regulator-fixed";
12 regulator-name = "vddvario";
13 regulator-always-on;
16 vdd33a: regulator-vdd33a {
17 compatible = "regulator-fixed";
18 regulator-name = "vdd33a";
19 regulator-always-on;
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/memory-controllers/ |
| H A D | omap-gpmc.txt | 7 - compatible: Should be set to one of the following:
9 ti,omap2420-gpmc (omap2420)
10 ti,omap2430-gpmc (omap2430)
11 ti,omap3430-gpmc (omap3430 & omap3630)
12 ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
13 ti,am3352-gpmc (am335x devices)
15 - reg: A resource specifier for the register space
17 - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is
19 - #address-cells: Must be set to 2 to allow memory address translation
20 - #size-cells: Must be set to 1 to allow CS address passing
[all …]
|
| H A D | ti,gpmc-child.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Tony Lindgren <tony@atomide.com>
11 - Roger Quadros <rogerq@kernel.org>
15 represents any device connected to the GPMC bus. It may be a Flash chip,
23 # GPMC Timing properties for child nodes. All are optional and default to 0.
24 gpmc,sync-clk-ps:
28 # Chip-select signal timings corresponding to GPMC_CONFIG2:
[all …]
|
| H A D | st,stm32-fmc2-ebi-props.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christophe Kerello <christophe.kerello@foss.st.com>
11 - Marek Vasut <marex@denx.de>
14 st,fmc2-ebi-cs-transaction-type:
33 st,fmc2-ebi-cs-cclk-enable:
40 st,fmc2-ebi-cs-mux-enable:
46 st,fmc2-ebi-cs-buswidth:
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
| H A D | qdu1000.dtsi | 1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
7 #include <dt-bindings/clock/qcom,rpmh.h>
8 #include <dt-bindings/dma/qcom-gpi.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interconnect/qcom,icc.h>
11 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include <dt-bindings/power/qcom-rpmpd.h>
14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arc/ |
| H A D | hsdk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/reset/snps,hsdk-reset.h>
18 #address-cells = <2>;
19 #size-cells = <2>;
22 … "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
30 #address-cells = <1>;
31 #size-cells = <0>;
62 input_clk: input-clk {
[all …]
|
| /freebsd/sys/dev/qcom_qup/ |
| H A D | qcom_spi.c | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
56 #include <dev/clk/clk.h>
69 { "qcom,spi-qup-v1.1.1", QCOM_SPI_HW_QPI_V1_1 },
70 { "qcom,spi-qup-v2.1.1", QCOM_SPI_HW_QPI_V2_1 },
71 { "qcom,spi-qup-v2.2.1", QCOM_SPI_HW_QPI_V2_2 },
76 * Flip the CS GPIO line either active or inactive.
78 * Actually listen to the CS polarity.
[all …]
|
| /freebsd/sys/arm/ti/ |
| H A D | ti_spi.c | 1 /*-
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
78 int clk, conf, ctrl, div, i, j, wl; in ti_spi_printr() local
93 for (i = 0; i < sc->sc_numcs; i++) { in ti_spi_printr()
103 while (j-- > 0) in ti_spi_printr()
106 clk = TI_SPI_GCLK / div; in ti_spi_printr()
108 device_printf(dev, "wordlen: %-2d clock: %d\n", wl, clk); in ti_spi_printr()
155 if (!ofw_bus_is_compatible(dev, "ti,omap4-mcspi")) in ti_spi_probe()
171 sc->sc_dev = dev; in ti_spi_attach()
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/display/samsung/ |
| H A D | samsung,exynos7-decon.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Inki Dae <inki.dae@samsung.com>
11 - Seung-Woo Kim <sw0312.kim@samsung.com>
12 - Kyungmin Park <kyungmin.park@samsung.com>
13 - Krzysztof Kozlowski <krzk@kernel.org>
18 buffer to an external LCD interface.
22 const: samsung,exynos7-decon
[all …]
|
| /freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | imx8mm-data-modul-edm-sbc.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/net/qca-ar803x.h>
9 #include <dt-bindings/phy/phy-imx8-pcie.h>
14 compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
22 stdout-path = &uart3;
32 compatible = "pwm-backlight";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_panel_backlight>;
35 brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
[all …]
|
| /freebsd/sys/dev/spibus/controller/rockchip/ |
| H A D | rk_spi.c | 1 /*-
2 * SPDX-License-Identifier: BSD-2-Clause
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
45 #include <dev/clk/clk.h>
88 { "rockchip,rk3328-spi", 1 },
89 { "rockchip,rk3399-spi", 1 },
90 { "rockchip,rk3568-spi", 1 },
97 { -1, 0 }
121 #define RK_SPI_LOCK(sc) mtx_lock(&(sc)->mtx)
[all …]
|