/freebsd/sys/contrib/device-tree/Bindings/fpga/ |
H A D | fpga-region.txt | 58 * FPGA Bridges gate bus signals between a host and FPGA. 59 * FPGA Bridges should be disabled while the FPGA is being programmed to 61 * FPGA bridges may be actual hardware or soft logic on an FPGA. 62 * During Full Reconfiguration, hardware bridges between the host and FPGA 67 buses, eliminating the need to show the hardware FPGA bridges in the 111 1. Disable appropriate FPGA bridges. 113 3. Enable the FPGA bridges. 118 will disable the bridges. 129 * FPGA Bridges 145 FPGA region will be the child of one of the hardware bridges (th [all...] |
H A D | fpga-region.yaml | 65 * FPGA Bridges gate bus signals between a host and FPGA. 66 * FPGA Bridges should be disabled while the FPGA is being programmed to 68 * FPGA bridges may be actual hardware or soft logic on an FPGA. 69 * During Full Reconfiguration, hardware bridges between the host and FPGA 74 buses, eliminating the need to show the hardware FPGA bridges in the 118 1. Disable appropriate FPGA bridges. 120 3. Enable the FPGA bridges. 125 will disable the bridges. 136 * FPGA Bridges 152 FPGA region will be the child of one of the hardware bridges (the bridge that [all …]
|
H A D | altera-freeze-bridge.txt | 3 The Altera Freeze Bridge Controller manages one or more freeze bridges. 4 The controller can freeze/disable the bridges which prevents signal 6 unfreeze/enable the bridges which allows traffic to pass through the
|
H A D | xlnx,pr-decoupler.yaml | 17 decouplers/fpga bridges. The controller can decouple/disable the bridges 19 can also couple / enable the bridges which allows traffic to pass through the
|
H A D | xilinx-pr-decoupler.txt | 4 decouplers / fpga bridges. 5 The controller can decouple/disable the bridges which prevents signal 7 couple / enable the bridges which allows traffic to pass through the
|
/freebsd/share/man/man4/ |
H A D | agp.4 | 46 M1541, M1621 and M1671 host to AGP bridges 48 751, 761 and 762 host to AGP bridges 50 RS100, RS200, RS250 and RS300 AGP bridges 52 i820, i840, i845, i850, and i860 host to AGP bridges 56 …40, 82845, 82845G, 82850, 82855, 82855GM, 82860, 82865, 82875P, E7205 and E7505 host to AGP bridges 60 …645, 645DX, 648, 650, 651, 655, 661, 730, 735, 740, 741, 745, 746, 760 and 5591 host to AGP bridges 62 …53, 8754, 8763, 8783, KT880, PM800, PM880, PN800, PN880, PT880, XM266 and XN266 host to PCI bridges
|
H A D | pccbb.4 | 38 driver implements the Yenta specification for CardBus bridges. 40 The following PCI cardbus and pcmcia bridges are supported:
|
H A D | pcic.4 | 36 driver provides support for older ISA and non-Yenta PCI PC Card bridges. 90 The following PCI pcmcia bridges are supported:
|
H A D | pci.4 | 113 driver also includes support for PCI-PCI bridges, 114 various platform-specific Host-PCI bridges, 485 Ignore any firmware-assigned bus number registers in PCI-PCI bridges. 489 buses behind PCI-PCI bridges. 492 bridges.
|
H A D | cdce.4 | 66 USB-to-Ethernet bridges based on the USB Communication Device Class 77 USB 1.x bridges support speeds of up to 12Mbps, and USB 2.0 speeds of
|
/freebsd/sys/contrib/device-tree/Bindings/display/bridge/ |
H A D | megachips-stdpxxxx-ge-b850v3-fw.txt | 2 STDP4028-ge-b850v3-fw bridges (LVDS-DP) 3 STDP2690-ge-b850v3-fw bridges (DP-DP++) 11 STDP2690 behave as the stock bridges would. The compatible strings include the 12 suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with 16 two bridges behaves as a single one. The only interfaces exposed by the
|
H A D | simple-bridge.yaml | 7 title: Transparent non-programmable DRM bridges 14 This binding supports transparent non-programmable bridges that don't require
|
/freebsd/usr.sbin/bsnmpd/modules/snmp_bridge/ |
H A D | BRIDGE-MIB.txt | 73 clarified for bridges supporting IEEE 802.1t or 77 has been clarified for bridges supporting the Rapid 176 -- bridges. 309 route bridges." 321 transparent and source route bridges." 330 -- implemented by those bridges that support the Spanning Tree 360 On bridges supporting IEEE 802.1t or IEEE 802.1w, 503 "The value that all bridges use for MaxAge when this 521 "The value that all bridges use for HelloTime when this 536 "The value that all bridges use for ForwardDelay when [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/pci/ |
H A D | pci.txt | 1 PCI bus bridges have standardized Device Tree bindings: 18 host bridges in the system, otherwise potentially conflicting domain numbers 19 may be assigned to root buses behind different host bridges. The domain 68 When present, the port is external-facing. All bridges and endpoints
|
H A D | apple,pcie.yaml | 18 PCIe host bridges is absent. 23 the child nodes that represent the PCI bridges that correspond to
|
/freebsd/sys/contrib/device-tree/Bindings/ata/ |
H A D | cortina,gemini-sata-bridge.txt | 4 takes two Faraday Technology FTIDE010 PATA controllers and bridges 11 - resets: phandles to the reset lines for both SATA bridges 17 the ATA controller and SATA bridges. Values 0..3:
|
H A D | cortina,gemini-sata-bridge.yaml | 14 takes two Faraday Technology FTIDE010 PATA controllers and bridges 26 description: phandles to the reset lines for both SATA bridges 55 bridges.
|
/freebsd/sys/dev/cardbus/ |
H A D | card_if.m | 78 # pccard bridges call this method to initate the attachment of a card 85 # pccard bridges call this to detach a card.
|
/freebsd/sys/contrib/device-tree/Bindings/arm/tegra/ |
H A D | nvidia,tegra194-cbb.yaml | 16 initiators and targets using different bridges like AXIP2P, AXI2APB. 69 Specifies the node having all axi2apb bridges which need to be checked
|
H A D | nvidia,tegra194-axi2apb.yaml | 22 description: Physical base address and length of registers for all bridges
|
/freebsd/sys/contrib/device-tree/Bindings/display/ |
H A D | ste,mcde.txt | 5 LCD displays or bridges. It is used in the ST-Ericsson U8500 platform. 45 Display panels and bridges will appear as children on the DSI hosts, and
|
/freebsd/usr.sbin/pciconf/ |
H A D | pciconf.8 | 89 bridges, and 2 for 93 bridges. 136 bridges,
|
/freebsd/sys/compat/linuxkpi/common/include/linux/ |
H A D | vgaarb.h | 90 * on P2P bridges if necessary, so that the requested resources can 93 * VGA forwarding on parent P2P bridges if any). 96 * segment, since P2P bridges don't differenciate VGA memory and IO
|
/freebsd/sys/dev/netmap/ |
H A D | netmap_vale.c | 116 /* Max number of vale bridges (loader tunable). */ 124 "Max number of vale bridges"); 245 /* Allows external modules to create bridges in exclusive mode, 322 struct nm_bridge *b, *bridges; in netmap_vale_list() local 327 netmap_bns_getbridges(&bridges, &num_bridges); in netmap_vale_list() 329 /* this is used to enumerate bridges and ports */ in netmap_vale_list() 342 req->nr_bridge_idx = b - bridges; /* bridge index */ in netmap_vale_list() 373 b = bridges + i; in netmap_vale_list() 384 j = 0; /* following bridges scan from 0 */ in netmap_vale_list()
|
/freebsd/sys/x86/pci/ |
H A D | pci_bus.c | 196 * things pretending to be host bridges. The MIOC will in legacy_pcib_is_host_bridge() 372 * Scan the first pci bus for host-pci bridges and add pcib instances 445 * bridges to the same logical bus. in legacy_pcib_identify() 724 * Provide a PCI-PCI bridge driver for PCI buses behind PCI-PCI bridges
|