/linux/Documentation/devicetree/bindings/mmc/ |
H A D | moxa,moxart-mmc.txt | 16 - dmas : Should contain two DMA channels, line request number must be 5 for 22 mmc: mmc@98e00000 { 25 interrupts = <5 0>; 27 dmas = <&dma 5>, 28 <&dma 5>;
|
/linux/Documentation/devicetree/bindings/dma/ |
H A D | moxa,moxart-dma.txt | 35 For example, MMC request line is 5 37 mmc: mmc@98e00000 { 40 interrupts = <5 0>; 42 dmas = <&dma 5>, 43 <&dma 5>;
|
/linux/Documentation/devicetree/bindings/media/ |
H A D | samsung,exynos5250-gsc.yaml | 36 maxItems: 5 40 maxItems: 5 85 minItems: 5 101 video-scaler@13e00000 {
|
/linux/arch/arm64/boot/dts/amd/ |
H A D | elba-flash-parts.dtsi | 92 partition@5a00000 { 102 partition@6e00000 {
|
/linux/arch/arm/boot/dts/moxa/ |
H A D | moxart.dtsi | 77 gpio-rtc-sclk = <&gpio 5 0>; 96 mmc: mmc@98e00000 { 99 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; 101 dmas = <&dma 5>, 102 <&dma 5>;
|
/linux/arch/arm/boot/dts/intel/ixp/ |
H A D | intel-ixp42x-linksys-wrv54g.dts | 72 cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; 96 * CHECKME: not using redboot? FIS index 0x3f @7e00000? 159 /* Should be port 5 on the KS8995 switch */ 160 phy5: ethernet-phy@5 { 161 reg = <5>; 166 /* EthC - connected to KS8995 switch port 5 */
|
/linux/Documentation/devicetree/bindings/display/msm/ |
H A D | qcom,qcm2290-mdss.yaml | 89 display-subsystem@5e00000 { 114 display-controller@5e01000 { 146 dsi@5e94000 { 198 dsi0_phy: phy@5e94400 {
|
H A D | qcom,sm6125-mdss.yaml | 84 display-subsystem@5e00000 { 108 display-controller@5e01000 { 150 dsi@5e94000 { 202 phy@5e94400 {
|
H A D | qcom,sm6115-mdss.yaml | 86 display-subsystem@5e00000 { 105 display-controller@5e01000 { 138 dsi@5e94000 { 187 dsi0_phy: phy@5e94400 {
|
H A D | qcom,sm6375-mdss.yaml | 84 display-subsystem@5e00000 { 105 display-controller@5e01000 { 148 dsi@5e94000 { 201 mdss_dsi0_phy: phy@5e94400 {
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | sm6125.dtsi | 268 xbl_aop_mem: memory@45e00000 { 298 venus_mem: memory@52e00000 { 333 cont_splash_mem: memory@5c000000 { 338 dfps_data_mem: memory@5cf00000 { 343 cdsp_sec_mem: memory@5f800000 { 348 qseecom_mem: memory@5e400000 { 1203 usb3_dwc3: usb@4e00000 { 1222 mdss: display-subsystem@5e00000 { 1248 mdss_mdp: display-controller@5e01000 { 1319 mdss_dsi0: dsi@5e94000 { [all …]
|
H A D | qcm2290.dtsi | 283 <5 296>, /* Soundwire master_irq */ 301 xbl_aop_mem: xbl-aop@45e00000 { 356 cont_splash_memory: framebuffer@5c000000 { 361 dfps_data_memory: dpfs-data@5cf00000 { 765 bits = <5 8>; 801 opp-5 { 1314 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, 1315 <&gpi_dma0 1 5 QCOM_GPI_I2C>; 1339 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, 1340 <&gpi_dma0 1 5 QCOM_GPI_SPI>; [all …]
|
H A D | sdm670.dtsi | 496 xbl_mem: xbl-mem@85e00000 { 534 venus_mem: venus@92e00000 { 554 adsp_mem: adsp@93e00000 { 850 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, 851 <&gpi_dma0 1 5 QCOM_GPI_I2C>; 1056 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, 1057 <&gpi_dma1 1 5 QCOM_GPI_I2C>; 1577 interrupts = <5>; 1757 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | p1022ds.dtsi | 56 partition@3e00000 { 222 fsl,tclk-period = <5>;
|
H A D | p2020ds.dtsi | 54 dink@3e00000 { 123 nand@5,0 { 155 interrupts = <5 1 0 0>; 159 interrupts = <5 1 0 0>; 186 fsl,tclk-period = <5>; 239 // IDSEL 0x11 func 5 - PCI slot 1
|
H A D | mpc8572ds.dtsi | 55 partition@3e00000 { 134 nand@5,0 { 196 fsl,tclk-period = <5>; 279 /* IDSEL 0x11 func 5 - PCI slot 1 */ 327 /* IDSEL 0x12 func 5 - PCI slot 2 */
|
/linux/arch/arm64/boot/dts/sprd/ |
H A D | sharkl3.dtsi | 19 ap_ahb_regs: syscon@20e00000 { 199 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
/linux/arch/arm/boot/dts/marvell/ |
H A D | armada-xp-lenovo-ix4-300d.dts | 126 partition@e00000 { 248 pcie@5,0 {
|
/linux/arch/arm/boot/dts/intel/pxa/ |
H A D | pxa3xx.dtsi | 33 (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) : \ 44 (gpio <= 5) ? (0x284 + 4 * gpio) : \ 56 #define MFP_AF5 (5 << 0) 170 gpio: gpio@40e00000 {
|
/linux/arch/arm64/boot/dts/xilinx/ |
H A D | zynqmp-sm-k26-revA.dts | 96 <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>, 144 &qspi { /* MIO 0-5 - U143 */ 206 partition@1e00000 { 332 "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-j721s2-main.dtsi | 130 clocks = <&ehrpwm_tbclk 5>, <&k3_clks 165 0>; 199 main_crypto: crypto@4e00000 { 821 hwspinlock: spinlock@30e00000 { 1127 clocks = <&k3_clks 226 5>; 1129 assigned-clocks = <&k3_clks 226 5>; /* NAVSS0_CPTS_0_RCLK */ 1819 <&k3_clks 158 5>, 1838 main_r5fss0: r5fss@5c00000 { 1847 main_r5fss0_core0: r5f@5c00000 { 1862 main_r5fss0_core1: r5f@5d00000 { 1878 main_r5fss1: r5fss@5e00000 { [all …]
|
H A D | k3-j721e-main.dtsi | 142 clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>; 241 hwspinlock: spinlock@30e00000 { 478 cpsw0_port5: port@5 { 479 reg = <5>; 530 main_crypto: crypto@4e00000 { 703 clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>; 763 clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>; 823 clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>; 883 clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>; 1616 clocks = <&k3_clks 92 5>, <&k3_clks 92 0>; [all …]
|
H A D | k3-j784s4-main.dtsi | 188 clocks = <&ehrpwm_tbclk 5>, <&k3_clks 224 0>; 259 main_crypto: crypto@4e00000 { 1037 assigned-clock-parents = <&k3_clks 141 5>; 1178 clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>; 1215 clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>; 1252 clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>; 1289 clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>; 1376 hwspinlock: hwlock@30e00000 { 1685 assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */ 1752 main_cpsw0_port5: port@5 { [all …]
|
/linux/arch/arm64/boot/dts/nvidia/ |
H A D | tegra234-p3740-0002+p3701-0008.dts | 275 host1x@13e00000 { 311 "p2u-5", "p2u-6", "p2u-7";
|
/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos5420.dtsi | 652 dmas = <&pdma0 5 669 dmas = <&pdma1 5 712 hsi2c_8: i2c@12e00000 { 805 gsc_0: video-scaler@13e00000 { 993 interrupts = <24 5>; 1150 interrupts = <8 5>;
|