| /linux/drivers/net/ethernet/intel/ice/ |
| H A D | ice_ethtool.h | 107 [36] = ICE_PHY_TYPE(50GB, 50000baseCR2_Full),
108 [37] = ICE_PHY_TYPE(50GB, 50000baseSR2_Full),
109 [38] = ICE_PHY_TYPE(50GB, 50000baseSR2_Full),
110 [39] = ICE_PHY_TYPE(50GB, 50000baseKR2_Full),
111 [40] = ICE_PHY_TYPE(50GB, 50000baseSR2_Full),
112 [41] = ICE_PHY_TYPE(50GB, 50000baseCR2_Full),
113 [42] = ICE_PHY_TYPE(50GB, 50000baseSR2_Full),
114 [43] = ICE_PHY_TYPE(50GB, 50000baseCR2_Full),
115 [44] = ICE_PHY_TYPE(50GB, 50000baseCR_Full),
116 [45] = ICE_PHY_TYPE(50GB, 50000baseSR_Full),
[all …]
|
| /linux/tools/power/cpupower/bench/ |
| H A D | example.cfg | 1 sleep = 50000
2 load = 50000
6 sleep_step = 50000
7 load_step = 50000
|
| /linux/Documentation/devicetree/bindings/leds/ |
| H A D | ti,tps61310.yaml | 63 - minimum: 50000
65 multipleOf: 50000
72 - minimum: 50000
74 multipleOf: 50000
|
| /linux/arch/mips/pci/ |
| H A D | pci-tx4938.c | 49 (pciclk + 50000) / 1000000, in tx4938_report_pciclk()
50 ((pciclk + 50000) / 100000) % 10); in tx4938_report_pciclk()
67 (pciclk + 50000) / 1000000, in tx4938_report_pci1clk()
68 ((pciclk + 50000) / 100000) % 10); in tx4938_report_pci1clk()
|
| H A D | pci-tx4927.c | 41 (pciclk + 50000) / 1000000, in tx4927_report_pciclk()
42 ((pciclk + 50000) / 100000) % 10); in tx4927_report_pciclk()
|
| /linux/tools/testing/selftests/net/packetdrill/ |
| H A D | tcp_rcv_big_endseq.pkt | 26 +0 < P. 4001:54001(50000) ack 1 win 257
30 +1 < P. 5001:55001(50000) ack 1 win 257
40 +0 < P. 4001:54001(50000) ack 1 win 257
|
| /linux/drivers/memory/ |
| H A D | jedec_ddr_data.c | 47 .tFAW = 50000,
68 .tFAW = 50000,
89 .tFAW = 50000,
110 .tFAW = 50000,
|
| /linux/drivers/mtd/nand/raw/ |
| H A D | nand_timings.c | 34 .tALS_min = 50000,
42 .tCLS_min = 50000,
57 .tRP_min = 50000,
64 .tWP_min = 50000,
84 .tCHZ_max = 50000,
95 .tRC_min = 50000,
129 .tCHZ_max = 50000,
174 .tCHZ_max = 50000,
315 .tCK_min = 50000,
325 .tDSC_min = 50000,
|
| /linux/arch/arm/boot/dts/rockchip/ |
| H A D | rv1109-relfor-saib.dts | 50 pwms = <&pwm9 0 50000 0>;
56 pwms = <&pwm6 0 50000 0>;
62 pwms = <&pwm10 0 50000 0>;
71 pwms = <&pwm2 0 50000 0>;
77 pwms = <&pwm8 0 50000 0>;
83 pwms = <&pwm5 0 50000 0>;
|
| /linux/drivers/power/supply/ |
| H A D | bq25980_charger.h | 87 #define BQ25975_BUSOVP_SC_STEP_uV 50000
88 #define BQ25960_BUSOVP_SC_STEP_uV 50000
93 #define BQ25980_BUSOVP_BYP_STEP_uV 50000
|
| H A D | rt9471.c | 194 [RT9471_RANGE_AICR] = LINEAR_RANGE(50000, 1, 63, 50000),
196 [RT9471_RANGE_IPRE] = LINEAR_RANGE(50000, 0, 15, 50000),
198 [RT9471_RANGE_ICHG] = LINEAR_RANGE(0, 0, 63, 50000),
199 [RT9471_RANGE_IEOC] = LINEAR_RANGE(50000, 0, 15, 50000),
|
| /linux/sound/spi/ |
| H A D | Kconfig | 31 range 8000 50000
34 Limited by hardware to be between 8000 Hz and 50000 Hz.
|
| /linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm53016-meraki-mr32.dts | 65 pwms = <&pwm 0 50000 0>;
73 pwms = <&pwm 1 50000 0>;
81 pwms = <&pwm 2 50000 0>;
|
| /linux/drivers/regulator/ |
| H A D | as3711-regulator.c | 109 REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000),
113 REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000),
118 REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000),
119 REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000),
|
| H A D | tps65217-regulator.c | 53 REGULATOR_LINEAR_RANGE(1550000, 25, 52, 50000),
59 REGULATOR_LINEAR_RANGE(1500000, 0, 8, 50000),
61 REGULATOR_LINEAR_RANGE(2450000, 14, 31, 50000),
|
| /linux/tools/testing/selftests/bpf/benchs/ |
| H A D | run_bench_bloom_filter_map.sh | 13 for e in 10000 50000 75000 100000 250000 500000 750000 1000000 2500000 5000000; do
34 for e in 10000 50000 75000 100000 250000 500000 750000 1000000 2500000 5000000; do
|
| /linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | maxim,max14577.yaml | 35 MAX14577: 50000-20000
69 minimum: 50000
|
| H A D | bq2515x.yaml | 53 minimum: 50000
72 constant-charge-current-max-microamp = <50000>;
|
| H A D | bq25980.yaml | 38 enum: [ 0, 5000, 10000, 50000, 300000]
57 switch cap mode. 50000 micro volt step.
|
| H A D | bq24257.yaml | 101 ti,termination-current = <50000>;
119 ti,termination-current = <50000>;
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | elpida_ecb240abacn.dtsi | 38 tFAW = <50000>;
60 tFAW = <50000>;
|
| /linux/arch/arm/boot/dts/nvidia/ |
| H A D | tegra20-acer-a500-picasso.dts | 730 emc-table@50000 {
731 reg = <50000>;
733 clock-frequency = <50000>;
828 emc-table@50000 {
829 reg = <50000>;
831 clock-frequency = <50000>;
926 emc-table@50000 {
927 reg = <50000>;
929 clock-frequency = <50000>;
1024 emc-table@50000 {
[all …]
|
| /linux/arch/arm/boot/dts/samsung/ |
| H A D | exynos5422-odroidxu3-common.dtsi | 62 temperature = <50000>; /* millicelsius */
145 temperature = <50000>;
218 temperature = <50000>;
291 temperature = <50000>;
364 temperature = <50000>;
|
| /linux/arch/arm64/boot/dts/rockchip/ |
| H A D | px30-engicam-common.dtsi | 85 snps,reset-delays-us = <0 50000 50000>;
|
| /linux/Documentation/translations/zh_CN/scheduler/ |
| H A D | sched-bwc.rst | 191 # echo 50000 > cpu.cfs_period_us /* period = 50ms */
201 # echo 50000 > cpu.cfs_period_us /* period = 50ms */
|