/freebsd/sys/contrib/device-tree/Bindings/sound/ |
H A D | sgtl5000.yaml | 44 values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not 46 4k. 47 enum: [ 0, 2, 4, 8 ] 63 1 = 1.66 mA 2.87 mA 4.02 mA 64 2 = 3.33 mA 5.74 mA 8.03 mA 65 3 = 4.99 mA 8.61 mA 12.05 mA 76 1 = 1.66 mA 2.87 mA 4.02 mA 77 2 = 3.33 mA 5.74 mA 8.03 mA 78 3 = 4.99 mA 8.61 mA 12.05 mA
|
H A D | sgtl5000.txt | 21 The resistor can take values of 2k, 4k or 8k. 24 micbias resistor is set to 4K. 36 1 = 1.66 mA 2.87 mA 4.02 mA 37 2 = 3.33 mA 5.74 mA 8.03 mA 38 3 = 4.99 mA 8.61 mA 12.05 mA 45 1 = 1.66 mA 2.87 mA 4.02 mA 46 2 = 3.33 mA 5.74 mA 8.03 mA 47 3 = 4.99 mA 8.61 mA 12.05 mA
|
/freebsd/sys/contrib/device-tree/Bindings/power/supply/ |
H A D | ti,lp8727.yaml | 45 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% 53 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, 54 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA 76 /* AC charger: 5% EOC and 500mA charging current */ 80 charging-current = /bits/ 8 <4>; 83 /* USB charger: 10% EOC and 400mA charging current */
|
/freebsd/sys/contrib/device-tree/Bindings/iio/dac/ |
H A D | ad5758.txt | 44 * <0 20000>: 0 mA to 20 mA current range 45 * <0 24000>: 0 mA to 24 mA current range 46 * <4 24000>: 4 mA to 20 mA current range 47 * <(-20000) 20000>: ±20 mA current range 48 * <(-24000) 24000>: ±24 mA current range 49 * <(-1000) 22000>: −1 mA to +22 mA current range
|
H A D | ad5755.txt | 52 4: 4 mA to 20 mA current range. 53 5: 0 mA to 20 mA current range. 54 6: 0 mA to 24 mA current range. 76 4 82 4 102 adi,mode = <4>; 108 adi,mode = <4>; 114 adi,mode = <4>; 120 adi,mode = <4>;
|
H A D | adi,ad5755.yaml | 86 4: 4 mA to 20 mA current range. 87 5: 0 mA to 20 mA current range. 88 6: 0 mA to 24 mA current range. 108 - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0] 109 - enum: [1, 2, 4, 16, 32, 64, 128, 256] 145 adi,mode = <4>; 151 adi,mode = <4>; 157 adi,mode = <4>; 163 adi,mode = <4>;
|
/freebsd/tools/boot/ |
H A D | full-test.sh | 61 local ma=$2 64 [ "${m}" != "${ma}" ] && ma_combo="${m}-${ma}" 71 local ma=$2 73 local flavor=$4 74 local ma_combo=$(ma_combo $m $ma) 76 local url="${URLBASE}/${m}/${ma}/ISO-IMAGES/${v}/${file}.xz" 89 local a m ma 93 ma=${a##*:} 94 fetch_one $m $ma ${FREEBSD_VERSION} bootonly.iso 103 local ma=$2 [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/input/touchscreen/ |
H A D | stmpe.txt | 11 2 -> 4 samples 18 4 -> 1 ms 27 4 -> 5 ms 34 0 -> 20 mA (typical 35mA max) 35 1 -> 50 mA (typical 80 mA max) 43 4 -> 80 clocks (recommended) 85 st,sample-time = <4>; 99 * 50 mA typical 80 mA max touchscreen drivers
|
/freebsd/contrib/llvm-project/llvm/include/llvm/Analysis/ |
H A D | MemorySSA.h | 22 /// %call = call noalias i8* @_Znwm(i64 4) #2 24 /// %call1 = call noalias i8* @_Znwm(i64 4) #2 26 /// store i32 5, i32* %0, align 4 27 /// store i32 7, i32* %1, align 4 28 /// %2 = load i32* %0, align 4 29 /// %3 = load i32* %1, align 4 38 /// %call = call noalias i8* @_Znwm(i64 4) #3 41 /// %call1 = call noalias i8* @_Znwm(i64 4) #3 42 /// %4 = bitcast i8* %call1 to i32* 44 /// store i32 5, i32* %2, align 4 [all …]
|
/freebsd/sys/dev/mii/ |
H A D | mii.c | 125 struct mii_attach_args *ma; in miibus_attach() local 133 ma = device_get_ivars(children[i]); in miibus_attach() 134 ma->mii_data = mii; in miibus_attach() 182 struct mii_attach_args *ma; in miibus_print_child() local 185 ma = device_get_ivars(child); in miibus_print_child() 187 retval += printf(" PHY %d", ma->mii_phyno); in miibus_print_child() 217 struct mii_attach_args *ma; in miibus_child_pnpinfo() local 219 ma = device_get_ivars(child); in miibus_child_pnpinfo() 221 MII_OUI(ma->mii_id1, ma->mii_id2), in miibus_child_pnpinfo() 222 MII_MODEL(ma->mii_id2), MII_REV(ma->mii_id2)); in miibus_child_pnpinfo() [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/phy/ |
H A D | phy-stm32-usbphyc.yaml | 125 - <0> = 18.87 mA target current / nominal + 0% 126 - <1> = 19.165 mA target current / nominal + 1.56% 127 - <2> = 19.46 mA target current / nominal + 3.12% 128 - <3> = 19.755 mA target current / nominal + 4.68% 129 - <4> = 20.05 mA target current / nominal + 6.24% 130 - <5> = 20.345 mA target current / nominal + 7.8% 131 - <6> = 20.64 mA target current / nominal + 9.36% 132 - <7> = 20.935 mA target current / nominal + 10.92% 133 - <8> = 21.23 mA target current / nominal + 12.48% 134 - <9> = 21.525 mA target current / nominal + 14.04% [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
H A D | pinctrl-mt8183.txt | 64 It can only support 2/4/6/8/10/12/14/16mA in mt8183. 66 driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving 68 they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific 78 When E1=0/E0=0, the strength is 0.125mA. 79 When E1=0/E0=1, the strength is 0.25mA. 80 When E1=1/E0=0, the strength is 0.5mA. 81 When E1=1/E0=1, the strength is 1mA. 127 mediatek,drive-strength-adv = <4>;
|
H A D | mediatek,mt8183-pinctrl.yaml | 111 enum: [2, 4, 6, 8, 10, 12, 14, 16] 122 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they 123 can support 0.125/0.25/0.5/1mA adjustment. If we enable specific 126 When E1=0/E0=0, the strength is 0.125mA. 127 When E1=0/E0=1, the strength is 0.25mA. 128 When E1=1/E0=0, the strength is 0.5mA. 129 When E1=1/E0=1, the strength is 1mA. 136 4: (E1, E0, EN) = (1, 0, 0) 142 enum: [0, 1, 2, 3, 4, [all...] |
H A D | mediatek,mt8365-pinctrl.yaml | 103 enum: [2, 4, 6, 8, 10, 12, 14, 16] 126 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they 127 can support 0.125/0.25/0.5/1mA adjustment. If we enable specific 130 When E1=0/E0=0, the strength is 0.125mA. 131 When E1=0/E0=1, the strength is 0.25mA. 132 When E1=1/E0=0, the strength is 0.5mA. 133 When E1=1/E0=1, the strength is 1mA. 140 4: (E1, E0, EN) = (1, 0, 0) 146 enum: [0, 1, 2, 3, 4, [all...] |
/freebsd/sys/contrib/device-tree/Bindings/clock/ |
H A D | ti,lmk04832.yaml | 49 ti,spi-4wire-rdbk: 51 Select SPI 4wire readback pin configuration. 92 enum: [1, 2, 4, 8] 93 default: 4 114 HSDS 6 mA 0x02 115 HSDS 8 mA 0x03 119 CML 16 mA 0x07 120 CML 24 mA 0x08 121 CML 32 mA 0x09 182 ti,spi-4wire-rdbk = <0>; [all …]
|
/freebsd/contrib/bearssl/test/ |
H A D | test_math.c | 134 k = 4 - (zlen & 3); in print_z() 139 for (k = 0; k < zlen; k += 4) { in print_z() 247 uint32_t mp[40], ma[40], mb[40], mv[60], mx[100]; in test_modint() local 265 if (impl->decode_mod(ma, ea, alen, mp) != 1) { in test_modint() 288 check_eqz(ma, a); in test_modint() 292 impl->decode_mod(ma, ea, alen, mp); in test_modint() 294 ctl = impl->add(ma, mb, 1); in test_modint() 295 ctl |= impl->sub(ma, mp, 0) ^ (uint32_t)1; in test_modint() 296 impl->sub(ma, mp, ctl); in test_modint() 299 check_eqz(ma, t1); in test_modint() [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | msm8992-pins.dtsi | 31 /* 0-3 for sdc1 4-6 for sdc2 */ 34 /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ 39 drive-strength = <16>; /* 16mA */ 47 drive-strength = <2>; /* 2mA */ 63 drive-strength = <2>; /* 2mA */ 71 drive-strength = <8>; /* 8mA */
|
/freebsd/crypto/openssl/crypto/bn/asm/ |
H A D | parisc-mont.pl | 24 # toward 4 times 16x16=32-bit multiplications [plus complementary 85 $PUSHMA ="std,ma"; 91 $SIZE_T =4; 162 $PUSH %r7,`-$FRAME+4*$SIZE_T`(%sp) 168 $code.=<<___ if ($SIZE_T==4); 169 ldw `-$FRAME_MARKER-4`($fp),$n0 174 $code.=<<___ if ($BN_SZ==4); 189 fldws,ma 4($bp),${fbi} ; bp[0] 196 fldws 4($n0),${fn0} ; only low part of n0 197 fldws 4($bp),${fbi} ; bp[0] in flipped word order [all …]
|
/freebsd/contrib/bc/locales/ |
H A D | pl_PL.ISO8859-2.msg | 37 4 "B��d �miertelny:" 46 4 "dzielenie przez 0" 54 4 "koniec komentarza nie m�g� by� znaleziony" 83 $set 4 88 4 "nieprawid�owe wyra�enie read()" 91 7 "stos ma zbyt ma�o element�w" 92 8 "stos dla rejestru \"%s\" ma zbyt ma�o element�w" 103 4 "pli [all...] |
/freebsd/sys/dev/cxgbe/ |
H A D | t4_iov.c | 81 {0x5003, "Chelsio T540-CR"}, /* 4 x 10G */ 84 {0x500a, "Chelsio T504-BT"}, /* 4 x 1G */ 86 {0x500e, "Chelsio T540-LP-CR"}, /* 4 x 10G */ 92 {0x5018, "Chelsio T540-BT"}, /* 4 x 10GBaseT */ 93 {0x5019, "Chelsio T540-LP-BT"}, /* 4 x 10GBaseT */ 94 {0x501a, "Chelsio T540-SO-BT"}, /* 4 x 10GBaseT, nomem */ 95 {0x501b, "Chelsio T540-SO-CR"}, /* 4 x 10G, nomem */ 100 {0x6003, "Chelsio T6425-CR"}, /* 4 x 10/25G */ 101 {0x6004, "Chelsio T6425-SO-CR"}, /* 4 x 10/25G, nomem */ 221 pci_get_slot(dev), 4); in t4iov_attach() [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/leds/backlight/ |
H A D | sky81452-backlight.txt | 16 : It should be one of 4, 5, 6 and 7V. 17 - skyworks,current-limit-mA 18 : It should be 2300mA or 2750mA. 28 skyworks,current-limit-mA = <2300>;
|
/freebsd/sys/dev/sfxge/common/ |
H A D | efx_regs_mcdi_strs.h | 62 #define MC_CMD_SENSOR_FAN_4_ENUM_STR "Fan 4 speed: RPM" 64 #define MC_CMD_SENSOR_OUT_IAOE_ENUM_STR "AOE FPGA current: mA" 65 #define MC_CMD_SENSOR_IN_IAOE_ENUM_STR "AOE FPGA input current: mA" 68 #define MC_CMD_SENSOR_IN_I0V9_ENUM_STR "0.9v power current: mA" 69 #define MC_CMD_SENSOR_IN_I1V2_ENUM_STR "1.2v power current: mA" 89 #define MC_CMD_SENSOR_IN_I0V9_A_ENUM_STR "0.9v power phase A current: mA" 92 #define MC_CMD_SENSOR_IN_I0V9_B_ENUM_STR "0.9v power phase B current: mA" 116 #define MC_CMD_SENSOR_IN_I1V8_ENUM_STR "1.8v power current: mA" 117 #define MC_CMD_SENSOR_IN_I2V5_ENUM_STR "2.5v power current: mA" 118 #define MC_CMD_SENSOR_IN_I3V3_ENUM_STR "3.3v power current: mA" [all …]
|
/freebsd/sys/contrib/device-tree/include/dt-bindings/usb/ |
H A D | pd.h | 27 #define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ 30 #define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) argument 32 #define PDO_FIXED(mv, ma, flags) \ argument 34 PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) 52 #define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ 56 #define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) argument 71 #define PDO_PPS_APDO_MAX_CURR_SHIFT 0 /* 50mA units */ 80 #define PDO_PPS_APDO_MAX_CURR(ma) \ argument 81 ((((ma) / 50) & PDO_PPS_APDO_CURR_MASK) << PDO_PPS_APDO_MAX_CURR_SHIFT) 123 #define IDH_PTYPE_ACABLE 4 [all …]
|
/freebsd/crypto/heimdal/lib/gssapi/mech/ |
H A D | gss_mo.c | 207 memcpy(p, "GS2-", 4); in make_sasl_name() 208 p += 4; in make_sasl_name() 213 *p++ = basis_32[((h[1] & 1) << 4) | (h[2] >> 4)]; in make_sasl_name() 216 *p++ = basis_32[((h[3] & 3) << 3) | (h[4] >> 5)]; in make_sasl_name() 217 *p++ = basis_32[(h[4] & 0x1f)]; in make_sasl_name() 589 struct _gss_oid_name_table *ma = NULL; in gss_display_mech_attr() local 600 for (n = 0; ma == NULL && _gss_ont_ma[n].oid; n++) in gss_display_mech_attr() 602 ma = &_gss_ont_ma[n]; in gss_display_mech_attr() 604 if (ma == NULL) in gss_display_mech_attr() 609 bd.value = rk_UNCONST(ma->name); in gss_display_mech_attr() [all …]
|
/freebsd/sys/fs/msdosfs/ |
H A D | msdosfs_vfsops.c | 4 * SPDX-License-Identifier: BSD-4-Clause 22 * 4. The name of TooLs GmbH may not be used to endorse or promote products 193 msdosfs_cmount(struct mntarg *ma, void *data, uint64_t flags) in msdosfs_cmount() argument 204 ma = mount_argsu(ma, "from", args.fspec, MAXPATHLEN); in msdosfs_cmount() 205 ma = mount_arg(ma, "export", &args.export, sizeof(args.export)); in msdosfs_cmount() 206 ma = mount_argf(ma, "uid", "%d", args.uid); in msdosfs_cmount() 207 ma = mount_argf(ma, "gid", "%d", args.gid); in msdosfs_cmount() 208 ma = mount_argf(ma, "mask", "%d", args.mask); in msdosfs_cmount() 209 ma = mount_argf(ma, "dirmask", "%d", args.dirmask); in msdosfs_cmount() 211 ma = mount_argb(ma, args.flags & MSDOSFSMNT_SHORTNAME, "noshortname"); in msdosfs_cmount() [all …]
|