| /freebsd/share/vt/fonts/ |
| H A D | tom-thumb.hex | 12 # Width: 4
57 004C:80808080E000
76 005F:00000000E000
138 00BF:40004080E000
|
| /freebsd/libexec/rc/rc.d/ |
| H A D | stf | 29 hexfrag2=`hexprint $(($3*256 + $4))`
59 route add -inet6 2002:e000:: -prefixlen 20 ::1 -reject
71 route delete -inet6 2002:e000:: -prefixlen 20 ::1
|
| /freebsd/sys/contrib/device-tree/src/arm/st/ |
| H A D | stm32mp133.dtsi | 11 m_can1: can@4400e000 {
74 ethernet2: ethernet@5800e000 {
101 snps,blen = <0 0 0 0 16 8 4>;
|
| H A D | ste-hrefv60plus.dtsi | 72 gpio@8012e000 {
104 gpio@8000e000 {
166 gpio@8011e000 {
227 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
228 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
|
| H A D | ste-snowball.dts | 84 linux,code = <4>;
88 button@4 {
118 gpio@8012e000 {
135 gpio@8000e000 {
164 gpio@8011e000 {
230 gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
250 bus-width = <4>;
278 bus-width = <4>;
362 <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
|
| /freebsd/sys/contrib/device-tree/Bindings/nvmem/ |
| H A D | lpc1857-eeprom.txt | 19 eeprom: eeprom@4000e000 {
27 interrupts = <4>;
|
| H A D | nxp,lpc1857-eeprom.yaml | 52 eeprom@4000e000 {
60 interrupts = <4>;
|
| /freebsd/sys/contrib/device-tree/Bindings/mips/cavium/ |
| H A D | cib.txt | 24 interrupt-controller@107000000e000 {
37 * 4 - level active high
|
| /freebsd/sys/contrib/device-tree/Bindings/interrupt-controller/ |
| H A D | sigma,smp8642-intc.txt | 19 interrupt-controller@6e000 {
46 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
| /freebsd/sys/contrib/device-tree/Bindings/rtc/ |
| H A D | nvidia,tegra20-rtc.yaml | 57 timer@7000e000 {
61 clocks = <&tegra_car 4>;
|
| /freebsd/sys/contrib/device-tree/Bindings/display/tilcdc/ |
| H A D | tilcdc.txt | 44 the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
46 crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
53 fb: fb@4830e000 {
|
| /freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
| H A D | omap2430.dtsi | 113 gpio2: gpio@4900e000 {
167 gpmc,num-waitpins = <4>;
224 mcbsp4: mcbsp@4808e000 {
282 ti,mbox-num-users = <4>;
|
| /freebsd/sys/contrib/device-tree/src/arm/rockchip/ |
| H A D | rk3188.dtsi | 131 vop1: vop@1010e000 {
148 timer3: timer@2000e000 {
180 spdif: sound@1011e000 {
252 gpio2: gpio@2003e000 {
608 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
612 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
|
| H A D | rk3066a.dtsi | 111 vop1: vop@1010e000 {
184 dmas = <&dmac1_s 4>, <&dmac1_s 5>;
242 timer2: timer@2000e000 {
324 gpio2: gpio@2003e000 {
408 rockchip,pins = <4 RK_PB1 2 &pcfg_pull_default>;
412 rockchip,pins = <4 RK_PB2 2 &pcfg_pull_default>;
507 rockchip,pins = <4 RK_PB7 1 &pcfg_pull_default>;
772 dmas = <&dmac2 4>;
|
| /freebsd/contrib/file/magic/Magdir/ |
| H A D | cafebabe | 8 # The long at offset 4 in a Mach-O universal binary tells the number of
9 # architectures; the short at offset 4 in a Java bytecode file is the JVM minor
27 # 1000h 4000h seldom 2d000h 88000h 5b000h 10e000 h
36 >4 belong 1 Mach-O universal binary with 1 architecture:
40 >4 ubelong >1
41 >>4 ubelong <20 Mach-O universal binary with %d architectures:
44 >>>4 ubelong >1
46 >>>4 ubelong >2
48 >>>4 ubelong >3
50 >>>4 ubelong >4
[all …]
|
| /freebsd/sys/contrib/device-tree/Bindings/firmware/ |
| H A D | nvidia,tegra186-bpmp.txt | 80 cpu_bpmp_tx: shmem@4e000 {
87 cpu_bpmp_rx: shmem@4f000 {
|
| /freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
| H A D | realtek,rtd1315e-pinctrl.yaml | 78 enum: [4, 8]
144 4: -0.25ns
147 enum: [ 0, 2, 3, 4, 5 ]
162 pinctrl@4e000 {
186 drive-strength = <4>;
|
| H A D | realtek,rtd1319d-pinctrl.yaml | 77 enum: [4, 8]
143 4: -0.25ns
146 enum: [ 0, 2, 3, 4, 5 ]
161 pinctrl@4e000 {
185 drive-strength = <4>;
|
| H A D | realtek,rtd1619b-pinctrl.yaml | 76 enum: [4, 8]
142 4: -0.25ns
145 enum: [ 0, 2, 3, 4, 5 ]
160 pinctrl@4e000 {
184 drive-strength = <4>;
|
| /freebsd/sys/contrib/device-tree/src/arm/nvidia/ |
| H A D | tegra30-colibri-eval-v3.dts | 15 rtc2 = "/rtc@7000e000";
105 bus-width = <4>;
133 brightness-levels = <255 128 64 32 16 8 4 0>;
194 regulator-name = "VCC_USB[1-4]";
|
| H A D | tegra20-colibri-iris.dts | 15 rtc2 = "/rtc@7000e000";
178 bus-width = <4>;
185 brightness-levels = <255 128 64 32 16 8 4 0>;
188 enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
|
| H A D | tegra20-colibri-eval-v3.dts | 15 rtc2 = "/rtc@7000e000";
190 bus-width = <4>;
197 brightness-levels = <255 128 64 32 16 8 4 0>;
200 enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
258 regulator-name = "VCC_USB[1-4]";
|
| /freebsd/sys/contrib/device-tree/src/arm/nxp/mxs/ |
| H A D | imx23-xfi3.dts | 62 bus-width = <4>;
72 bus-width = <4>;
123 auart1: serial@8006e000 {
157 brightness-levels = <0 4 8 16 32 64 128 255>;
|
| H A D | imx23.dtsi | 87 dmas = <&dma_apbh 4>;
224 mmc0_4bit_pins_a: mmc0-4bit@0 {
276 mmc1_4bit_pins_a: mmc1-4bit@0 {
451 axi-ahb@8002e000 {
494 dmas = <&dma_apbx 4>;
586 auart1: serial@8006e000 {
|
| /freebsd/contrib/sendmail/libsm/ |
| H A D | utf8_valid.c | 21 ** Code Points 1st 2s 3s 4s
27 ** U+E000..U+FFFF EE..EF 80..BF 80..BF
|