/linux/Documentation/devicetree/bindings/media/ |
H A D | qcom,msm8916-venus.yaml | 24 maxItems: 1 36 maxItems: 1 75 video-codec@1d00000 {
|
/linux/arch/arm/boot/dts/marvell/ |
H A D | kirkwood-ts219.dtsi | 41 #address-cells = <1>; 42 #size-cells = <1>; 62 partition@d00000 {
|
H A D | armada-370-dlink-dns327l.dts | 61 gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; 108 usb_power: regulator-1 { 153 pcie@1,0 { 159 /* Port 1, Lane 0 */ 272 #address-cells = <1>; 273 #size-cells = <1>; 302 partition@5d00000 { 316 /* 1 MiB for BBT */
|
H A D | armada-xp-linksys-mamba.dts | 59 nr-ports = <1>; 70 bm,pool-short = <1>; 106 #address-cells = <1>; 117 wan_white@1 { 189 gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; 217 pcie@1,0 { 224 /* Port 0, Lane 1 */ 257 #address-cells = <1>; 258 #size-cells = <1>; 273 #address-cells = <1>; [all …]
|
/linux/Documentation/devicetree/bindings/clock/ |
H A D | qcom,sc7180-lpasscorecc.yaml | 35 maxItems: 1 38 const: 1 41 const: 1 44 minItems: 1 62 maxItems: 1 89 #clock-cells = <1>; 90 #power-domain-cells = <1>; 97 clock-controller@62d00000 { 104 #clock-cells = <1>; 105 #power-domain-cells = <1>;
|
/linux/arch/arm/boot/dts/intel/pxa/ |
H A D | pxa25x.dtsi | 17 #address-cells = <1>; 18 #size-cells = <1>; 23 #clock-cells = <1>; 50 pxairq: interrupt-controller@40d00000 { 70 #pwm-cells = <1>; 77 #pwm-cells = <1>;
|
H A D | pxa2xx.dtsi | 30 #address-cells = <1>; 31 #size-cells = <1>; 54 #address-cells = <1>; 55 #size-cells = <1>; 58 pxairq: interrupt-controller@40d00000 { 59 #interrupt-cells = <1>;
|
H A D | pxa27x.dtsi | 24 pxairq: interrupt-controller@40d00000 { 52 #pwm-cells = <1>; 59 #pwm-cells = <1>; 66 #pwm-cells = <1>; 73 #pwm-cells = <1>; 130 #address-cells = <1>; 131 #size-cells = <1>; 136 #clock-cells = <1>;
|
H A D | pxa3xx.dtsi | 12 ((gpio <= 1) ? (0x674 + 4 * gpio) : \ 26 ((gpio <= 1) ? (0x674 + 4 * gpio) : \ 52 #define MFP_AF1 (1 << 0) 95 * Drive 0 0 0 0 X(1) 0 96 * Drive 1 0 1 X(1) 0 0 97 * Pull hi (1) 1 X(1) 1 0 0 98 * Pull lo (0) 1 X(0) 0 1 0 99 * Z (float) 1 X(0) 0 0 0 152 #address-cells = <1>; 157 pxairq: interrupt-controller@40d00000 { [all …]
|
/linux/Documentation/devicetree/bindings/memory-controllers/ |
H A D | samsung,exynos5422-dmc.yaml | 46 minItems: 1 49 maxItems: 1 99 ppmu_dmc0_0: ppmu@10d00000 { 137 interrupts = <16 0>, <16 1>;
|
/linux/arch/arm64/boot/dts/airoha/ |
H A D | en7581.dtsi | 36 npu-rxdesc@86d00000 { 48 #address-cells = <1>; 80 cpu1: cpu@1 { 135 #address-cells = <1>; 136 #size-cells = <1>; 145 uart1: serial@1fbf0000 {
|
/linux/Documentation/devicetree/bindings/sound/ |
H A D | davinci-mcasp-audio.yaml | 22 minItems: 1 28 minItems: 1 35 description: 0 - I2S or 1 - DIT operation mode 38 - 1 52 0 - Inactive, 1 - TX, 2 - RX 55 minItems: 1 62 minItems: 1 68 minItems: 1 76 maxItems: 1 105 minItems: 1 [all …]
|
/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-a1-ad402.dts | 31 secos_reserved: secos@3d00000 { 52 vddq_1v35: regulator-vddq-1v35 { 79 vddio_1v8: regulator-vddio-1v8 { 176 #address-cells = <1>; 180 pinctrl-1 = <&sdio_clk_gate_pins>;
|
/linux/Documentation/devicetree/bindings/interrupt-controller/ |
H A D | ti,sci-inta.yaml | 58 maxItems: 1 84 maxItems: 1 89 maxItems: 1 108 main_udmass_inta: msi-controller@33d00000 {
|
/linux/arch/arm/boot/dts/airoha/ |
H A D | en7523.dtsi | 10 #address-cells = <1>; 11 #size-cells = <1>; 14 #address-cells = <1>; 15 #size-cells = <1>; 38 npu_rxdesc@86D00000 { 50 #address-cells = <1>; 73 cpu1: cpu@1 { 89 scu: system-controller@1fa20000 { 93 #clock-cells = <1>; 100 #address-cells = <1>; [all …]
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | qcs8550.dtsi | 18 * 1. Firmware related regions which aren't shared with kernel. 75 smem_mem: smem-region@81d00000 {
|
/linux/arch/arm64/boot/dts/exynos/ |
H A D | exynos850.dtsi | 21 #size-cells = <1>; 56 #address-cells = <1>; 99 cpu1: cpu@1 { 162 #address-cells = <1>; 163 #size-cells = <1>; 196 #dma-cells = <1>; 245 samsung,cluster-index = <1>; 252 #clock-cells = <1>; 264 #clock-cells = <1>; 275 #clock-cells = <1>; [all …]
|
/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt7981b.dtsi | 14 #address-cells = <1>; 24 cpu@1 { 63 #clock-cells = <1>; 69 #clock-cells = <1>; 76 #reset-cells = <1>; 82 #clock-cells = <1>; 140 #address-cells = <1>; 154 #address-cells = <1>; 168 #address-cells = <1>; 182 #address-cells = <1>; [all …]
|
/linux/arch/arm/boot/dts/qcom/ |
H A D | qcom-apq8026-asus-sparrow.dts | 37 modem_region: modem@4d00000 { 234 #address-cells = <1>; 237 wifi@1 { 239 reg = <1>;
|
H A D | qcom-apq8064-asus-nexus7-flo.dts | 25 #address-cells = <1>; 26 #size-cells = <1>; 29 ramoops@88d00000 { 112 data-lanes = <0 1 2 3>; 230 * msm_sdcc.1-sdc-vdd_io 249 /* mipi_dsi.1-dsi1_pll_vdda */ 270 /* msm_sdcc.1-sdc_vdd */ 286 /* mipi_dsi.1-dsi1_avdd */ 334 * mipi_dsi.1-dsi1_vddio
|
H A D | qcom-apq8026-huawei-sturgeon.dts | 42 modem_region: modem@4d00000 { 110 #address-cells = <1>; 113 rmi4-f01@1 { 115 syna,nosleep-mode = <1>; 120 syna,sensor-type = <1>; 314 #address-cells = <1>; 319 wifi@1 { 321 reg = <1>;
|
/linux/arch/arm/boot/dts/nuvoton/ |
H A D | nuvoton-npcm750-evb.dts | 72 #address-cells = <1>; 73 #size-cells = <1>; 79 #address-cells = <1>; 80 #size-cells = <1>; 82 label = "bb-uboot-1"; 108 spare1@d00000 { 133 #address-cells = <1>; 134 #size-cells = <1>; 140 #address-cells = <1>; 141 #size-cells = <1>; [all …]
|
/linux/arch/arm/boot/dts/allwinner/ |
H A D | sun8i-h3.dtsi | 71 #address-cells = <1>; 84 cpu1: cpu@1 { 87 reg = <1>; 166 syscon: system-control@1c00000 { 169 #address-cells = <1>; 170 #size-cells = <1>; 173 sram_c: sram@1d00000 { 176 #address-cells = <1>; 177 #size-cells = <1>; 188 video-codec@1c0e000 { [all …]
|
/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | mediatek,mt7981-pinctrl.yaml | 46 minItems: 1 53 maxItems: 1 85 "wa_aice1" "wa_aice" 0, 1 86 "wa_aice2" "wa_aice" 0, 1 87 "wm_uart_0" "uart" 0, 1 88 "dfd" "dfd" 0, 1, 4, 5 312 maxItems: 1 388 Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' 392 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 393 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. [all …]
|
/linux/arch/arm64/boot/dts/xilinx/ |
H A D | zynqmp-sm-k26-revA.dts | 3 * dts file for Xilinx ZynqMP SM-K26 rev2/1/B/A 21 model = "ZynqMP SM-K26 Rev2/1/B/A"; 95 io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>, 155 #address-cells = <1>; 156 #size-cells = <1>; 196 partition@1c80000 { 202 partition@1d00000 { 204 reg = <0x1D00000 0x100000>; /* 1MB */ 206 partition@1e00000 { 258 num-cs = <1>;
|