/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am62-mcu.dtsi | 146 clocks = <&k3_clks 131 0>; 147 power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; 148 assigned-clocks = <&k3_clks 131 0>; 149 assigned-clock-parents = <&k3_clks 131 2>;
|
H A D | k3-am62a-mcu.dtsi | 147 clocks = <&k3_clks 131 0>; 148 power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; 149 assigned-clocks = <&k3_clks 131 0>; 150 assigned-clock-parents = <&k3_clks 131 2>;
|
H A D | k3-am62p-j722s-common-mcu.dtsi | 156 clocks = <&k3_clks 131 0>; 157 power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; 158 assigned-clocks = <&k3_clks 131 0>; 159 assigned-clock-parents = <&k3_clks 131 2>;
|
/linux/arch/alpha/include/uapi/asm/ |
H A D | pal.h | 13 #define PAL_chmk 131 14 #define PAL_callsys 131
|
/linux/drivers/staging/media/atomisp/pci/isp/kernels/ctc/ctc_1.0/ |
H A D | ia_css_ctc_table.host.c | 48 132, 132, 131, 130, 131, 130, 129, 128,
|
/linux/Documentation/devicetree/bindings/media/ |
H A D | renesas,vsp1.yaml | 109 clocks = <&cpg CPG_MOD 131>; 111 resets = <&cpg 131>;
|
/linux/drivers/pinctrl/mediatek/ |
H A D | pinctrl-mt8183.c | 106 PIN_FIELD_BASE(131, 131, 8, 0x000, 0x10, 3, 1), 191 PIN_FIELD_BASE(131, 131, 8, 0x010, 0x10, 3, 1), 330 PIN_FIELD_BASE(131, 131, 8, 0x0A0, 0x10, 12, 3), 380 PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 6, 1), 425 PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 4, 1), 470 PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 5, 1),
|
H A D | pinctrl-mt8127.c | 127 MTK_PIN_DRV_GRP(131, 0xc20, 0, 2), 164 MTK_PIN_PUPD_SPEC_SR(131, 0xc50, 0, 2, 1), /* MSDC0_RSTB */ 198 MTK_PIN_IES_SMT_SPEC(127, 131, 0xc20, 4), 243 MTK_PIN_IES_SMT_SPEC(131, 131, 0xc50, 3),
|
H A D | pinctrl-mt8186.c | 173 PIN_FIELD_BASE(131, 131, 5, 0x0050, 0x10, 29, 1), 361 PIN_FIELD_BASE(131, 131, 5, 0x00e0, 0x10, 12, 1), 527 PIN_FIELD_BASE(131, 131, 5, 0x0090, 0x10, 25, 1), 693 PIN_FIELD_BASE(131, 131, 5, 0x0070, 0x10, 25, 1), 956 PIN_FIELD_BASE(131, 131, 5, 0x0010, 0x10, 15, 3), 1016 PIN_FIELD_BASE(131, 131, 5, 0x0030, 0x10, 3, 3), 1039 PIN_FIELD_BASE(131, 131, 5, 0x00d0, 0x10, 2, 2), 1066 PIN_RSEL(131, 132, 0x0, 75000, 75000), 1067 PIN_RSEL(131, 132, 0x1, 10000, 75000), 1068 PIN_RSEL(131, 132, 0x2, 5000, 5000), [all …]
|
/linux/drivers/hwmon/ |
H A D | hwmon-vid.c | 136 case 131: in vid_from_reg() 139 if (vrm == 131 && val == 0x3f) in vid_from_reg() 230 * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID 255 return brand == 2 ? 131 : 13; in get_via_model_d_vrm()
|
/linux/drivers/gpu/ipu-v3/ |
H A D | ipu-ic-csc.c | 155 { -44, -87, 131, }, 156 { 131, -110, -21, }, 277 { -30, -101, 131, }, 278 { 131, -119, -12, },
|
/linux/drivers/net/ethernet/agere/ |
H A D | Makefile | 3 # Makefile for the Agere ET-131x ethernet driver
|
/linux/include/dt-bindings/clock/ |
H A D | rk3228-cru.h | 54 #define SCLK_MAC_PHY 131 275 #define SRST_TIMER1 131
|
H A D | qcom,gcc-ipq8074.h | 140 #define GCC_SYS_NOC_USB1_AXI_CLK 131 369 #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131
|
H A D | qcom,ipq5332-gcc.h | 140 #define GCC_UNIPHY0_SYS_CLK 131 314 #define GCC_USB0_PHY_BCR 131
|
H A D | rk3308-cru.h | 133 #define ACLK_BUS 131 359 #define SRST_PDM_M 131
|
H A D | rk3328-cru.h | 102 #define ACLK_VOP_PRE 131 338 #define SRST_VIO_ARBI_H 131
|
H A D | exynos5410.h | 25 #define CLK_SCLK_UART3 131
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8-ss-ddr.dtsi | 16 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
/linux/arch/arm64/boot/dts/mediatek/ |
H A D | mt8173-pinfunc.h | 655 #define MT8173_PIN_131_I2S0_DATA0__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) 656 #define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S0_DO (MTK_PIN_NO(131) | 1) 657 #define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1 (MTK_PIN_NO(131) | 2) 658 #define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S2_DI_1 (MTK_PIN_NO(131) | 3) 659 #define MT8173_PIN_131_I2S0_DATA0__FUNC_SPI_CS_2_ (MTK_PIN_NO(131) | 5) 660 #define MT8173_PIN_131_I2S0_DATA0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(131) | 7)
|
/linux/drivers/staging/media/atomisp/pci/ |
H A D | atomisp_tables.h | 172 132, 132, 131, 130, 131, 130, 129, 128,
|
/linux/drivers/pinctrl/uniphier/ |
H A D | pinctrl-uniphier-ld11.c | 354 UNIPHIER_PINCTRL_PIN(131, "HS1DIN4", UNIPHIER_PIN_IECTRL_EXIST, 355 131, UNIPHIER_PIN_DRV_1BIT, 356 131, UNIPHIER_PIN_PULL_DOWN), 499 static const unsigned hscin1_p_pins[] = {124, 125, 126, 127, 128, 129, 130, 131, 583 131, 132, 133, 134, 135, 136, 137, 138, /* PORT21x */
|
H A D | pinctrl-uniphier-ld4.c | 408 UNIPHIER_PINCTRL_PIN(131, "XIRQ9", 0, 445 131, UNIPHIER_PIN_DRV_1BIT, 446 131, UNIPHIER_PIN_PULL_DOWN), 623 130, 131, 132, 133, 62, 7, 134, 63, /* XIRQ8-12, PORT165, XIRQ14-15 */ 708 case 121 ... 131: /* XIRQ1-XIRQ11 */ in uniphier_ld4_get_gpio_muxval()
|
/linux/drivers/media/v4l2-core/ |
H A D | v4l2-vp9.c | 34 { 39, 27, 61, 131, 110, 175, 44, 75, 136 }, /*left = d153*/ 42 { 68, 42, 19, 131, 160, 199, 55, 52, 83 }, /*left = d45 */ 44 { 50, 35, 33, 153, 104, 162, 64, 59, 131 }, /*left = d117*/ 75 { 53, 21, 36, 131, 63, 163, 60, 109, 81 }, /*left = d45 */ 156 { 118, 15, 123, 148, 131, 101, 44, 93, 131 }, /* y = v */ 297 { 104, 131, 216 }, 357 { 2, 72, 131 }, 417 { 10, 131, 185 }, 521 { 3, 74, 131 }, 665 { 12, 131, 190 }, [all …]
|
/linux/drivers/hid/ |
H A D | hid-sigmamicro.c | 33 0x29, 0x83, /* Usage Maximum (131) 35 */ 81 0x25, 0x01, /* Logical Maximum (1) 131 */
|