/linux/fs/nls/ |
H A D | nls_euc-jp.c | 17 #define IS_SJIS_LOW_BYTE(l) ((0x40 <= (l)) && ((l) <= 0xFC) && ((l) != 0x7F)) 19 #define IS_SJIS_JISX0208(h, l) ((((0x81 <= (h)) && ((h) <= 0x9F)) \ 20 || ((0xE0 <= (h)) && ((h) <= 0xEA))) \ 22 #define IS_SJIS_JISX0201KANA(c) ((0xA1 <= (c)) && ((c) <= 0xDF)) 23 #define IS_SJIS_UDC_LOW(h, l) (((0xF0 <= (h)) && ((h) <= 0xF4)) \ 25 #define IS_SJIS_UDC_HI(h, l) (((0xF5 <= (h)) && ((h) <= 0xF9)) \ 27 #define IS_SJIS_IBM(h, l) (((0xFA <= (h)) && ((h) <= 0xFC)) \ 29 #define IS_SJIS_NECIBM(h, l) (((0xED <= (h)) && ((h) <= 0xEE)) \ 32 if ((sjis_lo) >= 0x9F) { \ 37 (euc_lo) = (sjis_lo) + ((sjis_lo) >= 0x7F ? 0x60 : 0x61); \ [all …]
|
/linux/drivers/gpu/drm/panel/ |
H A D | panel-samsung-s6e8aa0.c | 34 #define PANELCTL_SS_1_800 (0 << 5) 41 #define PANELCTL_CLK1_000 (0 << 3) 43 #define PANELCTL_CLK2_CON_MASK (7 << 0) 44 #define PANELCTL_CLK2_000 (0 << 0) 45 #define PANELCTL_CLK2_001 (1 << 0) 48 #define PANELCTL_INT1_000 (0 << 3) 50 #define PANELCTL_INT2_CON_MASK (7 << 0) 51 #define PANELCTL_INT2_000 (0 << 0) 52 #define PANELCTL_INT2_001 (1 << 0) 55 #define PANELCTL_BICTL_000 (0 << 3) [all …]
|
H A D | panel-magnachip-d53e6ea8966.c | 74 #define MCS_ELVSS_ON 0xb1 75 #define MCS_TEMP_SWIRE 0xb2 76 #define MCS_PASSWORD_0 0xf0 77 #define MCS_PASSWORD_1 0xf1 78 #define MCS_ANALOG_PWR_CTL_0 0xf4 79 #define MCS_ANALOG_PWR_CTL_1 0xf5 80 #define MCS_GTCON_SET 0xf7 81 #define MCS_GATELESS_SIGNAL_SET 0xf8 82 #define MCS_SET_GAMMA 0xf9 91 {0x01, 0x79, 0x78, 0x8d, 0xd9, 0xdf, 0xd5, 0xcb, 0xcf, 0xc5, [all …]
|
H A D | panel-boe-himax8279d.c | 59 gpiod_set_value(pinfo->enable_gpio, 0); in disable_gpios() 60 gpiod_set_value(pinfo->pp33_gpio, 0); in disable_gpios() 61 gpiod_set_value(pinfo->pp18_gpio, 0); in disable_gpios() 67 unsigned int i = 0; in send_mipi_cmds() 70 for (i = 0; i < pinfo->desc->on_cmds_num; i++) { in send_mipi_cmds() 74 if (err < 0) in send_mipi_cmds() 78 return 0; in send_mipi_cmds() 87 if (err < 0) { in boe_panel_disable() 92 return 0; in boe_panel_disable() 101 if (err < 0) in boe_panel_unprepare() [all …]
|
H A D | panel-himax-hx83102.c | 24 #define HX83102_SETPOWER 0xb1 25 #define HX83102_SETDISP 0xb2 26 #define HX83102_SETCYC 0xb4 27 #define HX83102_SETEXTC 0xb9 28 #define HX83102_SETMIPI 0xba 29 #define HX83102_SETVDC 0xbc 30 #define HX83102_SETBANK 0xbd 31 #define HX83102_UNKNOWN_BE 0xbe 32 #define HX83102_SETPTBA 0xbf 33 #define HX83102_SETSTBA 0xc0 [all …]
|
/linux/arch/arm/mach-omap2/ |
H A D | opp4xxx_data.c | 32 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c), 33 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16), 34 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23), 35 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27), 36 VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITROSB_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITROSB, 0xfa, 0x27), 37 VOLT_DATA_DEFINE(0, 0, 0, 0), 45 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c), 46 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16), 47 VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23), 48 VOLT_DATA_DEFINE(0, 0, 0, 0), [all …]
|
H A D | opp3xxx_data.c | 30 VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c), 31 VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c), 32 VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18), 33 VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18), 34 VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18), 35 VOLT_DATA_DEFINE(0, 0, 0, 0), 45 VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c), 46 VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c), 47 VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18), 48 VOLT_DATA_DEFINE(0, 0, 0, 0), [all …]
|
/linux/lib/crypto/ |
H A D | aesgcm.c | 43 * Returns: 0 on success, or -EINVAL if @keysize or @authsize contain values 60 return 0; in aesgcm_expandkey() 67 while (len > 0) { in aesgcm_ghash() 114 while (len > 0) { in aesgcm_crypt() 209 "\x58\xe2\xfc\xce\xfa\x7e\x30\x61" 240 "\x2c\xf3\x5a\xbd\x2b\xa6\xfa\xb4"; 262 "\x94\xfa\xe9\x5a\xe7\x12\x1a\x47"; 286 "\xeb\x06\xfa\xc4\x87\x2a\x27\x57" 362 "\xeb\x06\xfa\xc4\x87\x2a\x27\x57" 396 "\xfa\x70\x04\x70\xc6\x96\x1c\x7d" [all …]
|
H A D | chacha20poly1305-selftest.c | 31 0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74, 32 0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20, 33 0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66, 34 0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65, 35 0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69, 36 0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20, 37 0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20, 38 0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d, 39 0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e, 40 0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65, [all …]
|
/linux/crypto/ |
H A D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 245 "\x00\xA5\xDA\xFC\x53\x41\xFA\xF2\x89\xC4\xB9\x88\xDB\x30\xC1\xCD" 257 "\x32\x12\x4E\xF0\x23\x6E\x5D\x1E\x3B\x7E\x28\xFA\xE7\xAA\x04\x0A" 302 "\x13\xC7\x88\xDA\x70\x6B\x54\xF1\xE8\x27\xDC\xC3\x0F\x99\x6A\xFA" 310 "\x6D\xAF\x53\xFA\x71\xE2\x67\xE0\x9A\xFE\x03\xA9\x85\xD2\xC9\xAA" 336 "\x00\xFA\xAC\xE1\x37\x5E\x32\x11\x34\xC6\x72\x58\x2D\x91\x06\x3E" 348 "\xB5\x67\xFA\x37\xA8\xB8\xCF\x61\xE8\x63\xD8\x38\x06\x21\x2B\x92" 374 "\x00\x8D\x1B\x05\xCA\x24\x1F\x0C\x53\x19\x52\x74\x63\x21\xFA\x78" 409 "\x13\xC7\x88\xDA\x70\x6B\x54\xF1\xE8\x27\xDC\xC3\x0F\x99\x6A\xFA" [all …]
|
H A D | dh.c | 27 memset(ctx, 0, sizeof(*ctx)); in dh_clear_ctx() 50 return (p_len < 2048) ? -EINVAL : 0; in dh_check_params_length() 52 return (p_len < 1536) ? -EINVAL : 0; in dh_check_params_length() 68 return 0; in dh_set_params() 80 if (crypto_dh_decode_key(buf, len, ¶ms) < 0) in dh_set_secret() 83 if (dh_set_params(ctx, ¶ms) < 0) in dh_set_secret() 90 return 0; in dh_set_secret() 113 return 0; in dh_is_pubkey_valid() 126 if (mpi_cmp_ui(y, 1) < 1 || mpi_cmp(y, ctx->p) >= 0) in dh_is_pubkey_valid() 134 val = mpi_alloc(0); in dh_is_pubkey_valid() [all …]
|
H A D | kdf_sp800108.c | 25 int err = 0; in crypto_kdf108_ctr_generate() 39 for (i = 0; i < info_nvec; i++) { in crypto_kdf108_ctr_generate() 108 .ikmlen = 0, 114 "\x64\xa1\x45\xfa\xb2\x5e\x51\x7b" 117 "\xb4\x13\xfa\xac", 131 return 0; in crypto_kdf108_init() 133 ret = kdf_test(&kdf_ctr_hmac_sha256_tv_template[0], "hmac(sha256)", in crypto_kdf108_init()
|
/linux/fs/ |
H A D | ioctl.c | 42 * Returns 0 on success, -errno on error. 73 if (ur_block < 0) in ioctl_fibmap() 87 ur_block = 0; in ioctl_fibmap() 109 * Returns 0 on success, -errno on error, 1 if this was the last 119 if (fieinfo->fi_extents_max == 0) { in fiemap_fill_next_extent() 121 return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; in fiemap_fill_next_extent() 138 memset(&extent, 0, sizeof(extent)); in fiemap_fill_next_extent() 151 return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; in fiemap_fill_next_extent() 166 * Returns 0 on success, or a negative error on failure. 173 int ret = 0; in fiemap_prep() [all …]
|
/linux/drivers/media/usb/gspca/ |
H A D | topro.c | 22 0xff, 0xd8, /* jpeg */ 25 0xff, 0xdb, 0x00, 0x84, /* DQT */ 26 0, 28 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 29 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 30 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, 31 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, 32 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, 33 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 34 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, [all …]
|
/linux/net/wireless/certs/ |
H A D | wens.hex | 2 0x30, 0x82, 0x02, 0xa7, 0x30, 0x82, 0x01, 0x8f, 3 0x02, 0x14, 0x61, 0xc0, 0x38, 0x65, 0x1a, 0xab, 4 0xdc, 0xf9, 0x4b, 0xd0, 0xac, 0x7f, 0xf0, 0x6c, 5 0x72, 0x48, 0xdb, 0x18, 0xc6, 0x00, 0x30, 0x0d, 6 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 7 0x01, 0x01, 0x0b, 0x05, 0x00, 0x30, 0x0f, 0x31, 8 0x0d, 0x30, 0x0b, 0x06, 0x03, 0x55, 0x04, 0x03, 9 0x0c, 0x04, 0x77, 0x65, 0x6e, 0x73, 0x30, 0x20, 10 0x17, 0x0d, 0x32, 0x33, 0x31, 0x32, 0x30, 0x31, 11 0x30, 0x37, 0x34, 0x31, 0x31, 0x34, 0x5a, 0x18, [all …]
|
/linux/sound/pci/nm256/ |
H A D | nm256_coef.c | 2 #define NM_TOTAL_COEFF_COUNT 0x3158 5 0xFF, 0xFF, 0x2F, 0x00, 0x4B, 0xFF, 0xA5, 0x01, 0xEF, 0xFC, 0x21, 6 0x05, 0x87, 0xF7, 0x62, 0x11, 0xE9, 0x45, 0x5E, 0xF9, 0xB5, 0x01, 7 0xDE, 0xFF, 0xA4, 0xFF, 0x60, 0x00, 0xCA, 0xFF, 0x0D, 0x00, 0xFD, 8 0xFF, 0x36, 0x00, 0x36, 0xFF, 0xE6, 0x01, 0x3D, 0xFC, 0xD6, 0x06, 9 0x4C, 0xF3, 0xED, 0x20, 0x3D, 0x3D, 0x4A, 0xF3, 0x4E, 0x05, 0xB1, 10 0xFD, 0xE1, 0x00, 0xC3, 0xFF, 0x05, 0x00, 0x02, 0x00, 0xFD, 0xFF, 11 0x2A, 0x00, 0x5C, 0xFF, 0xAA, 0x01, 0x71, 0xFC, 0x07, 0x07, 0x7E, 12 0xF1, 0x44, 0x30, 0x44, 0x30, 0x7E, 0xF1, 0x07, 0x07, 0x71, 0xFC, 13 0xAA, 0x01, 0x5C, 0xFF, 0x2A, 0x00, 0xFD, 0xFF, 0x02, 0x00, 0x05, [all …]
|
/linux/include/uapi/linux/ |
H A D | matroxfb.h | 12 #define MATROXFB_OUTPUT_PRIMARY 0x0000 13 #define MATROXFB_OUTPUT_SECONDARY 0x0001 14 #define MATROXFB_OUTPUT_DFP 0x0002 16 #define MATROXFB_OUTPUT_MODE_PAL 0x0001 17 #define MATROXFB_OUTPUT_MODE_NTSC 0x0002 18 #define MATROXFB_OUTPUT_MODE_MONITOR 0x0080 20 #define MATROXFB_SET_OUTPUT_MODE _IOW('n',0xFA,size_t) 21 #define MATROXFB_GET_OUTPUT_MODE _IOWR('n',0xFA,size_t) 28 #define MATROXFB_SET_OUTPUT_CONNECTION _IOW('n',0xF8,size_t) 30 #define MATROXFB_GET_OUTPUT_CONNECTION _IOR('n',0xF8,size_t) [all …]
|
/linux/drivers/net/wireless/intersil/p54/ |
H A D | p54spi_eeprom.h | 19 0x47, 0x4d, 0x55, 0xaa, /* magic */ 20 0x00, 0x00, /* pad */ 21 0x00, 0x00, /* eeprom_pda_data_wrap length */ 22 0x00, 0x00, 0x00, 0x00, /* arm opcode */ 25 0x04, 0x00, 0x01, 0x01, /* PDR_MAC_ADDRESS */ 26 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee, 29 0x06, 0x00, 0x01, 0x10, /* PDR_INTERFACE_LIST */ 30 0x00, 0x00, /* role */ 31 0x0f, 0x00, /* if_id */ 32 0x85, 0x00, /* variant = Longbow RF, 2GHz */ [all …]
|
/linux/drivers/hid/ |
H A D | hid-petalynx.c | 25 if (*rsize >= 62 && rdesc[39] == 0x2a && rdesc[40] == 0xf5 && in pl_report_fixup() 26 rdesc[41] == 0x00 && rdesc[59] == 0x26 && in pl_report_fixup() 27 rdesc[60] == 0xf9 && rdesc[61] == 0x00) { in pl_report_fixup() 29 rdesc[60] = 0xfa; in pl_report_fixup() 30 rdesc[40] = 0xfa; in pl_report_fixup() 43 case 0x05a: pl_map_key_clear(KEY_TEXT); break; in pl_input_mapping() 44 case 0x05b: pl_map_key_clear(KEY_RED); break; in pl_input_mapping() 45 case 0x05c: pl_map_key_clear(KEY_GREEN); break; in pl_input_mapping() 46 case 0x05d: pl_map_key_clear(KEY_YELLOW); break; in pl_input_mapping() 47 case 0x05e: pl_map_key_clear(KEY_BLUE); break; in pl_input_mapping() [all …]
|
H A D | hid-gaff.c | 3 * Force feedback support for GreenAsia (Product ID 0x12) based devices 8 * 0e8f:0012 "GreenAsia Inc. USB Joystick " 39 dbg_hid("called with 0x%04x 0x%04x", left, right); in hid_gaff_play() 41 left = left * 0xfe / 0xffff; in hid_gaff_play() 42 right = right * 0xfe / 0xffff; in hid_gaff_play() 44 gaff->report->field[0]->value[0] = 0x51; in hid_gaff_play() 45 gaff->report->field[0]->value[1] = 0x0; in hid_gaff_play() 46 gaff->report->field[0]->value[2] = right; in hid_gaff_play() 47 gaff->report->field[0]->value[3] = 0; in hid_gaff_play() 48 gaff->report->field[0]->value[4] = left; in hid_gaff_play() [all …]
|
/linux/fs/xfs/ |
H A D | xfs_dahash_test.c | 20 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30, 21 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4, 22 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60, 23 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c, 24 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4, 25 0xe9, 0x70, 0x51, 0x8c, 0x7f, 0x95, 0x6f, 0x1a, 26 0x56, 0xa1, 0x5c, 0x27, 0x03, 0x67, 0x9f, 0x3a, 27 0xe2, 0x31, 0x11, 0x29, 0x6b, 0x98, 0xfc, 0xc4, 28 0x53, 0x24, 0xc5, 0x8b, 0xce, 0x47, 0xb2, 0xb9, 29 0x32, 0xcb, 0xc1, 0xd0, 0x03, 0x57, 0x4e, 0xd4, [all …]
|
/linux/sound/soc/sdw_utils/ |
H A D | soc_sdw_rt_amp_coeff_tables.h | 15 0xb0, 0xc5, 0x00, /* address: 0xc5b0; data: 0x00 */ 16 0xb1, 0xc5, 0x32, 17 0xb2, 0xc5, 0x44, 18 0xb3, 0xc5, 0x19, 19 0xc0, 0xc5, 0x04, 20 0xc1, 0xc5, 0x00, 21 0xc2, 0xc5, 0x00, 22 0xc3, 0xc5, 0x00, 23 0xd0, 0xc5, 0x02, 24 0xd1, 0xc5, 0x00, [all …]
|
/linux/lib/ |
H A D | crc32test.c | 15 * There are various incantations of crc32(). Some use a seed of 0 or ~0. 16 * Some xor at the end with ~0. The generic crc32() function takes 19 * drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0. 20 * fs/jffs2 uses seed 0, doesn't xor with ~0. 21 * fs/partitions/efi.c uses seed ~0, xor's with ~0. 36 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30, 37 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4, 38 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60, 39 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c, 40 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4, [all …]
|
H A D | crc7.c | 18 0x00, 0x12, 0x24, 0x36, 0x48, 0x5a, 0x6c, 0x7e, 19 0x90, 0x82, 0xb4, 0xa6, 0xd8, 0xca, 0xfc, 0xee, 20 0x32, 0x20, 0x16, 0x04, 0x7a, 0x68, 0x5e, 0x4c, 21 0xa2, 0xb0, 0x86, 0x94, 0xea, 0xf8, 0xce, 0xdc, 22 0x64, 0x76, 0x40, 0x52, 0x2c, 0x3e, 0x08, 0x1a, 23 0xf4, 0xe6, 0xd0, 0xc2, 0xbc, 0xae, 0x98, 0x8a, 24 0x56, 0x44, 0x72, 0x60, 0x1e, 0x0c, 0x3a, 0x28, 25 0xc6, 0xd4, 0xe2, 0xf0, 0x8e, 0x9c, 0xaa, 0xb8, 26 0xc8, 0xda, 0xec, 0xfe, 0x80, 0x92, 0xa4, 0xb6, 27 0x58, 0x4a, 0x7c, 0x6e, 0x10, 0x02, 0x34, 0x26, [all …]
|
/linux/tools/testing/selftests/bpf/progs/ |
H A D | test_misc_tcp_hdr_options.c | 20 __u16 active_lport_n = 0; 21 __u16 active_lport_h = 0; 22 __u16 passive_lport_n = 0; 23 __u16 passive_lport_h = 0; 26 unsigned int nr_pure_ack = 0; 27 unsigned int nr_data = 0; 28 unsigned int nr_syn = 0; 29 unsigned int nr_fin = 0; 30 unsigned int nr_hwtstamp = 0; 42 __u64 load_flags = check_syn ? BPF_LOAD_HDR_OPT_TCP_SYN : 0; in __check_active_hdr_in() [all …]
|