/linux/tools/testing/selftests/ia64/ |
H A D | aliasing-test.c | 36 if (fnmatch("/proc/bus/pci/*", path, 0) == 0) { in map_mem() 59 return 0; in map_mem() 66 int i, n, r, rc = 0, result = 0; in scan_tree() 69 n = scandir(path, &namelist, 0, alphasort); in scan_tree() 70 if (n < 0) { in scan_tree() 75 for (i = 0; i < n; i++) { in scan_tree() 78 if (fnmatch(".", name, 0) == 0) in scan_tree() 80 if (fnmatch("..", name, 0) == 0) in scan_tree() 88 if (fnmatch(file, name, 0) == 0) { in scan_tree() 90 if (rc == 0) in scan_tree() [all …]
|
/linux/tools/power/cpupower/debug/i386/ |
H A D | dump_psb.c | 15 #define LEN (0x100000 - 0xc0000) 16 #define OFFSET (0xc0000) 33 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, 35 1075, 1050, 1024, 1000, 975, 950, 925, 0, 64 for (i = 0; i < npstates; ++i) { in decode_pst() 76 return 0; in decode_pst() 88 if (psb->version != 0x12) in decode_psb() 104 if (numpst < 0) in decode_psb() 109 for (i = 0; i < numpst; i++) { in decode_psb() 112 if (relevant != 0) { in decode_psb() [all …]
|
/linux/Documentation/arch/arm/sa1100/ |
H A D | assabet.rst | 91 load zImage -r -b 0x100000 95 load -m ymodem -r -b 0x100000 99 fis create "Linux kernel" -b 0x100000 -l 0xc0000 108 load ramdisk_image.gz -r -b 0x800000 119 exec -b 0x100000 -l 0xc0000 140 load sample_img.jffs2 -r -b 0x100000 144 RedBoot> load sample_img.jffs2 -r -b 0x100000 145 Raw file loaded 0x00100000-0x00377424 154 0x500E0000 .. 0x503C0000 162 size of unallocated flash: 0x503c0000 - 0x500e0000 = 0x2e0000 [all …]
|
/linux/arch/arm/boot/dts/microchip/ |
H A D | sama5d3xcm.dtsi | 18 reg = <0x20000000 0x20000000>; 34 cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; 38 timer@0 { 40 reg = <0>; 51 pinctrl-0 = <&pinctrl_ebi_addr &pinctrl_ebi_cs0>; 55 nor: flash@0,0 { 57 linux,mtd-name = "physmap-flash.0"; 60 reg = <0x0 0x0 0x1000000>; 65 atmel,smc-ncs-rd-setup-ns = <0>; 66 atmel,smc-ncs-wr-setup-ns = <0>; [all …]
|
H A D | at91sam9rlek.dts | 21 reg = <0x20000000 0x4000000>; 42 atmel,dmacon = <0x1>; 43 atmel,lcdcon2 = <0x80008002>; 56 vfront-porch = <0>; 67 pinctrl-0 = <&pinctrl_ebi_addr_nand>; 73 pinctrl-0 = <&pinctrl_nand_oe_we 79 reg = <0x3 0x0 0x800000>; 92 at91bootstrap@0 { 94 reg = <0x0 0x40000>; 99 reg = <0x40000 0x80000>; [all …]
|
H A D | at91-sama5d4ek.dts | 20 reg = <0x20000000 0x20000000>; 37 pinctrl-0 = < 53 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; 54 slot@0 { 55 reg = <0>; 57 cd-gpios = <&pioE 5 0>; 66 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>; 68 flash@0 { 71 reg = <0>; 80 reg = <0x1a>; [all …]
|
H A D | tny_a9260_common.dtsi | 14 reg = <0x20000000 0x4000000>; 30 timer@0 { 32 reg = <0>, <1>; 51 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 55 reg = <0x3 0x0 0x800000>; 68 at91bootstrap@0 { 70 reg = <0x0 0x20000>; 75 reg = <0x20000 0x40000>; 80 reg = <0x60000 0x20000>; 85 reg = <0x80000 0x20000>; [all …]
|
H A D | tny_a9263.dts | 19 reg = <0x20000000 0x4000000>; 39 timer@0 { 41 reg = <0>, <1>; 61 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 65 reg = <0x3 0x0 0x800000>; 78 at91bootstrap@0 { 80 reg = <0x0 0x20000>; 85 reg = <0x20000 0x40000>; 90 reg = <0x60000 0x20000>; 95 reg = <0x80000 0x20000>; [all …]
|
H A D | at91sam9x5cm.dtsi | 11 reg = <0x20000000 0x8000000>; 27 timer@0 { 29 reg = <0>; 40 pinctrl_1wire_cm: 1wire_cm-0 { 52 pinctrl-0 = <&pinctrl_ebi_addr_nand 59 pinctrl-0 = <&pinctrl_nand_oe_we 65 reg = <0x3 0x0 0x800000>; 80 at91bootstrap@0 { 82 reg = <0x0 0x40000>; 87 reg = <0x40000 0xc0000>; [all …]
|
H A D | usb_a9260_common.dtsi | 26 timer@0 { 28 reg = <0>, <1>; 53 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 57 reg = <0x3 0x0 0x800000>; 70 at91bootstrap@0 { 72 reg = <0x0 0x20000>; 77 reg = <0x20000 0x40000>; 82 reg = <0x60000 0x20000>; 87 reg = <0x80000 0x20000>; 92 reg = <0xa0000 0x20000>; [all …]
|
/linux/drivers/mtd/maps/ |
H A D | netsc520.c | 45 .offset = 0, 46 .size = 0xc0000 50 .offset = 0xc0000, 51 .size = 0x40000 55 .offset = 0x100000, 56 .size = 0xe80000 60 .offset = 0xf80000, 61 .size = 0x80000 66 #define WINDOW_SIZE 0x00100000 67 #define WINDOW_ADDR 0x00200000 [all …]
|
H A D | scx200_docflash.c | 27 static int probe = 0; /* Don't autoprobe */ 28 static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */ 32 module_param(probe, int, 0); 34 module_param(size, int, 0); 36 module_param(width, int, 0); 38 module_param(flashtype, charp, 0); 51 .offset = 0, 52 .size = 0xc0000 56 .offset = 0xc0000, 57 .size = 0x40000 [all …]
|
/linux/arch/arm/boot/dts/marvell/ |
H A D | kirkwood-b3.dts | 25 reg = <0x00000000 0x20000000>; 60 m25p16@0 { 64 reg = <0>; 66 mode = <0>; 68 partition@0 { 69 reg = <0x0 0xc0000>; 74 reg = <0xc0000 0x20000>; 79 reg = <0xe0000 0x120000>; 88 * There is something on the bus at address 0x64. 117 pinctrl-0 = < &pmx_led_green &pmx_led_red [all …]
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | c293si-post.dtsi | 39 interrupts = <19 2 0 0>; 42 /* controller at 0xa000 */ 48 bus-range = <0 255>; 50 interrupts = <16 2 0 0>; 52 pcie@0 { 53 reg = <0 0 0 0 0>; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 61 /* IDSEL 0x0 */ 62 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 [all …]
|
/linux/arch/powerpc/boot/dts/ |
H A D | mgcoge.dts | 23 #size-cells = <0>; 25 PowerPC,8247@0 { 27 reg = <0>; 32 timebase-frequency = <0>; /* Filled in by U-Boot */ 33 clock-frequency = <0>; /* Filled in by U-Boot */ 34 bus-frequency = <0>; /* Filled in by U-Boot */ 44 reg = <0xf0010100 0x40>; 46 ranges = <0 0 0xfe000000 0x00400000 47 1 0 0x30000000 0x00010000 48 2 0 0x40000000 0x00010000 [all …]
|
/linux/drivers/net/wireless/mediatek/mt76/mt7615/ |
H A D | mmio.c | 15 [MT_TOP_CFG_BASE] = 0x01000, 16 [MT_HW_BASE] = 0x01000, 17 [MT_PCIE_REMAP_2] = 0x02504, 18 [MT_ARB_BASE] = 0x20c00, 19 [MT_HIF_BASE] = 0x04000, 20 [MT_CSR_BASE] = 0x07000, 21 [MT_PLE_BASE] = 0x08000, 22 [MT_PSE_BASE] = 0x0c000, 23 [MT_CFG_BASE] = 0x20200, 24 [MT_AGG_BASE] = 0x20a00, [all …]
|
/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-gx-mali450.dtsi | 45 reg = <0x0 0xc0000 0x0 0x40000>;
|
/linux/drivers/clk/imx/ |
H A D | clk-imx8qxp-lpcg.h | 11 #define LSIO_PWM_0_LPCG 0x00000 12 #define LSIO_PWM_1_LPCG 0x10000 13 #define LSIO_PWM_2_LPCG 0x20000 14 #define LSIO_PWM_3_LPCG 0x30000 15 #define LSIO_PWM_4_LPCG 0x40000 16 #define LSIO_PWM_5_LPCG 0x50000 17 #define LSIO_PWM_6_LPCG 0x60000 18 #define LSIO_PWM_7_LPCG 0x70000 19 #define LSIO_GPIO_0_LPCG 0x80000 20 #define LSIO_GPIO_1_LPCG 0x90000 [all …]
|
/linux/arch/arm64/boot/dts/qcom/ |
H A D | sm6125-xiaomi-laurel-sprout.dts | 21 qcom,msm-id = <394 0>; /* sm6125 v1 */ 22 qcom,board-id = <11 0>; 31 reg = <0 0x5c000000 0 (1560 * 720 * 4)>; 41 reg = <0x0 0xffb00000 0x0 0xc0000>; 46 reg = <0x0 0xffbc0000 0x0 0x80000>; 52 reg = <0x0 0xffc40000 0x0 0xc0000>; 53 record-size = <0x1000>; 54 console-size = <0x40000>; 55 pmsg-size = <0x20000>; 59 reg = <0x0 0xffd40000 0x0 0x1000>; [all …]
|
H A D | sm6125-sony-xperia-seine-pdx201.dts | 16 qcom,msm-id = <394 0x10000>; /* sm6125 v1 */ 17 qcom,board-id = <34 0>; 35 reg = <0 0x5c000000 0 (2520 * 1080 * 4)>; 51 pinctrl-0 = <&vol_down_n>; 68 reg = <0x0 0xffb00000 0x0 0xc0000>; 73 reg = <0x0 0xffbc0000 0x0 0x80000>; 79 reg = <0x0 0xffc40000 0x0 0xc0000>; 80 record-size = <0x1000>; 81 console-size = <0x40000>; 82 pmsg-size = <0x20000>; [all …]
|
/linux/arch/alpha/include/asm/ |
H A D | vga.h | 59 (((a) >= 0x3b0) && ((a) < 0x3e0) && \ 60 ((a) != 0x3b3) && ((a) != 0x3d3)) 63 (((a) >= 0xa0000) && ((a) <= 0xc0000)) 68 } while(0) 73 } while(0) 76 # define pci_vga_hose 0 77 # define __is_port_vga(a) 0 78 # define __is_mem_vga(a) 0
|
/linux/tools/perf/trace/beauty/tracepoints/ |
H A D | x86_msr.sh | 13 # Just the ones starting with 0x00000 so as to have a simple 17 regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x000… 24 …[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0xc0000[[:xdigit:]]+)[[:s… 33 regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MSR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0xc00…
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6sx-nitrogen6sx.dts | 16 reg = <0x80000000 0x40000000>; 21 pwms = <&pwm4 0 5000000 0>; 22 brightness-levels = <0 4 8 16 32 64 128 255>; 61 pinctrl-0 = <&pinctrl_usbotg1_vbus>; 72 pinctrl-0 = <&pinctrl_reg_wlan>; 99 pinctrl-0 = <&pinctrl_audmux>; 106 pinctrl-0 = <&pinctrl_ecspi1>; 109 flash: flash@0 { 112 reg = <0>; 116 partition@0 { [all …]
|
/linux/drivers/media/platform/qcom/venus/ |
H A D | hfi_venus_io.h | 9 #define VBIF_BASE 0x80000 11 #define VBIF_AXI_HALT_CTRL0 0x208 12 #define VBIF_AXI_HALT_CTRL1 0x20c 14 #define VBIF_AXI_HALT_CTRL0_HALT_REQ BIT(0) 15 #define VBIF_AXI_HALT_CTRL1_HALT_ACK BIT(0) 18 #define CPU_BASE 0xc0000 20 #define CPU_CS_BASE (CPU_BASE + 0x12000) 21 #define CPU_IC_BASE (CPU_BASE + 0x1f000) 22 #define CPU_BASE_V6 0xa0000 24 #define CPU_IC_BASE_V6 (CPU_BASE_V6 + 0x138) [all …]
|
/linux/tools/testing/selftests/kvm/include/x86_64/ |
H A D | apic.h |
|