/linux/drivers/media/dvb-frontends/ |
H A D | mb86a20s.c | 18 MB86A20S_13SEG = 0, 25 0xb0, 0xc0, 0xd0, 0xe0, 26 0xf0, 0x00, 0x10, 0x20, 59 { 0x70, 0x0f }, 60 { 0x70, 0xff }, 61 { 0x08, 0x01 }, 62 { 0x50, 0xd1 }, { 0x51, 0x20 }, 66 { 0x50, 0xd1 }, { 0x51, 0x22 }, 67 { 0x39, 0x01 }, 68 { 0x71, 0x00 }, [all …]
|
H A D | z0194a.h | 15 u8 aclk = 0; in sharp_z0194a_set_symbol_rate() 16 u8 bclk = 0; in sharp_z0194a_set_symbol_rate() 19 aclk = 0xb7; bclk = 0x47; } in sharp_z0194a_set_symbol_rate() 21 aclk = 0xb7; bclk = 0x4b; } in sharp_z0194a_set_symbol_rate() 23 aclk = 0xb7; bclk = 0x4f; } in sharp_z0194a_set_symbol_rate() 25 aclk = 0xb7; bclk = 0x53; } in sharp_z0194a_set_symbol_rate() 27 aclk = 0xb6; bclk = 0x53; } in sharp_z0194a_set_symbol_rate() 29 aclk = 0xb4; bclk = 0x51; } in sharp_z0194a_set_symbol_rate() 31 stv0299_writereg(fe, 0x13, aclk); in sharp_z0194a_set_symbol_rate() 32 stv0299_writereg(fe, 0x14, bclk); in sharp_z0194a_set_symbol_rate() [all …]
|
H A D | bsbe1.h | 12 0x01, 0x15, /* XTAL = 4MHz, VCO = 352 MHz */ 13 0x02, 0x30, /* MCLK = 88 MHz */ 14 0x03, 0x00, /* ACR output 0 */ 15 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 16 0x05, 0x05, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 17 0x06, 0x00, /* DAC output 0 */ 18 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 19 0x09, 0x00, /* FIFO */ 20 0x0c, 0x51, /* OP1/OP0 normal, val = 1 (LNB power on) */ 21 0x0d, 0x82, /* DC offset compensation = on, beta_agc1 = 2 */ [all …]
|
H A D | m88ds3103_priv.h | 23 #define M88RS6000_CHIP_ID 0x74 24 #define M88DS3103_CHIP_ID 0x70 26 #define M88DS3103_CHIPTYPE_3103 0 60 {0x23, 0x07}, 61 {0x08, 0x03}, 62 {0x0c, 0x02}, 63 {0x21, 0x54}, 64 {0x25, 0x8a}, 65 {0x27, 0x31}, 66 {0x30, 0x08}, [all …]
|
H A D | bsru6.h | 12 0x01, 0x15, 13 0x02, 0x30, 14 0x03, 0x00, 15 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 16 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 17 0x06, 0x40, /* DAC not used, set to high impendance mode */ 18 0x07, 0x00, /* DAC LSB */ 19 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ 20 0x09, 0x00, /* FIFO */ 21 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ [all …]
|
/linux/fs/unicode/ |
H A D | utf8data.c_shipped | 8 0, 9 0x10100, 10 0x20000, 11 0x20100, 12 0x30000, 13 0x30100, 14 0x30200, 15 0x40000, 16 0x40100, 17 0x50000, [all …]
|
/linux/drivers/gpu/drm/radeon/ |
H A D | rv770_smc.c | 34 #define FIRST_SMC_INT_VECT_REG 0xFFD8 35 #define FIRST_INT_VECT_S19 0xFFC0 38 0x08, 0x10, 0x08, 0x10, 39 0x08, 0x10, 0x08, 0x10, 40 0x08, 0x10, 0x08, 0x10, 41 0x08, 0x10, 0x08, 0x10, 42 0x08, 0x10, 0x08, 0x10, 43 0x08, 0x10, 0x08, 0x10, 44 0x08, 0x10, 0x08, 0x10, 45 0x08, 0x10, 0x08, 0x10, [all …]
|
/linux/drivers/scsi/aic7xxx/ |
H A D | aic79xx_seq.h_shipped | 9 0xff, 0x02, 0x06, 0x78, 10 0x00, 0xea, 0x6e, 0x59, 11 0x01, 0xea, 0x04, 0x30, 12 0xff, 0x04, 0x0c, 0x78, 13 0x19, 0xea, 0x6e, 0x59, 14 0x19, 0xea, 0x04, 0x00, 15 0x33, 0xea, 0x68, 0x59, 16 0x33, 0xea, 0x00, 0x00, 17 0x60, 0x3a, 0x3a, 0x68, 18 0x04, 0x4d, 0x35, 0x78, [all …]
|
H A D | aic7xxx_seq.h_shipped | 9 0xb2, 0x00, 0x00, 0x08, 10 0xf7, 0x11, 0x22, 0x08, 11 0x00, 0x65, 0xee, 0x59, 12 0xf7, 0x01, 0x02, 0x08, 13 0xff, 0x6a, 0x24, 0x08, 14 0x40, 0x00, 0x40, 0x68, 15 0x08, 0x1f, 0x3e, 0x10, 16 0x40, 0x00, 0x40, 0x68, 17 0xff, 0x40, 0x3c, 0x60, 18 0x08, 0x1f, 0x3e, 0x10, [all …]
|
/linux/drivers/gpu/drm/exynos/ |
H A D | exynos_hdmi.c | 54 #define HDMI_MAPPED_BASE 0xffff0000 162 0x01, 0x05, 0x00, 0xD8, 0x10, 0x1C, 0x30, 0x40, 163 0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87, 164 0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0, 165 0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x80, 171 0x01, 0x05, 0x00, 0xD4, 0x10, 0x9C, 0x09, 0x64, 172 0x6B, 0x10, 0x02, 0x51, 0xDF, 0xF2, 0x54, 0x87, 173 0x84, 0x00, 0x30, 0x38, 0x00, 0x08, 0x10, 0xE0, 174 0x22, 0x40, 0xE3, 0x26, 0x00, 0x00, 0x00, 0x80, 180 0x01, 0x05, 0x00, 0xD8, 0x10, 0x9C, 0xef, 0x5B, [all …]
|
/linux/drivers/char/agp/ |
H A D | intel-agp.h | 9 #define INTEL_APSIZE 0xb4 10 #define INTEL_ATTBASE 0xb8 11 #define INTEL_AGPCTRL 0xb0 12 #define INTEL_NBXCFG 0x50 13 #define INTEL_ERRSTS 0x91 16 #define I830_GMCH_CTRL 0x52 17 #define I830_GMCH_ENABLED 0x4 18 #define I830_GMCH_MEM_MASK 0x1 19 #define I830_GMCH_MEM_64M 0x1 20 #define I830_GMCH_MEM_128M 0 [all …]
|
/linux/arch/x86/kernel/cpu/microcode/ |
H A D | amd_shas.c | 3 { 0x8001227, { 4 0x99,0xc0,0x9b,0x2b,0xcc,0x9f,0x52,0x1b, 5 0x1a,0x5f,0x1d,0x83,0xa1,0x6c,0xc4,0x46, 6 0xe2,0x6c,0xda,0x73,0xfb,0x2d,0x23,0xa8, 7 0x77,0xdc,0x15,0x31,0x33,0x4a,0x46,0x18, 10 { 0x8001250, { 11 0xc0,0x0b,0x6b,0x19,0xfd,0x5c,0x39,0x60, 12 0xd5,0xc3,0x57,0x46,0x54,0xe4,0xd1,0xaa, 13 0xa8,0xf7,0x1f,0xa8,0x6a,0x60,0x3e,0xe3, 14 0x27,0x39,0x8e,0x53,0x30,0xf8,0x49,0x19, [all …]
|
/linux/drivers/media/usb/gspca/ |
H A D | se401.h | 12 #define SE401_REQ_GET_CAMERA_DESCRIPTOR 0x06 13 #define SE401_REQ_START_CONTINUOUS_CAPTURE 0x41 14 #define SE401_REQ_STOP_CONTINUOUS_CAPTURE 0x42 15 #define SE401_REQ_CAPTURE_FRAME 0x43 16 #define SE401_REQ_GET_BRT 0x44 17 #define SE401_REQ_SET_BRT 0x45 18 #define SE401_REQ_GET_WIDTH 0x4c 19 #define SE401_REQ_SET_WIDTH 0x4d 20 #define SE401_REQ_GET_HEIGHT 0x4e 21 #define SE401_REQ_SET_HEIGHT 0x4f [all …]
|
H A D | spca505.c | 23 #define IntelPCCameraPro 0 52 .priv = 0}, 57 #define SPCA50X_REG_USB 0x02 /* spca505 501 */ 59 #define SPCA50X_USB_CTRL 0x00 /* spca505 */ 60 #define SPCA50X_CUSB_ENABLE 0x01 /* spca505 */ 62 #define SPCA50X_REG_GLOBAL 0x03 /* spca505 */ 63 #define SPCA50X_GMISC0_IDSEL 0x01 /* Global control device ID select spca505 */ 64 #define SPCA50X_GLOBAL_MISC0 0x00 /* Global control miscellaneous 0 spca505 */ 66 #define SPCA50X_GLOBAL_MISC1 0x01 /* 505 */ 67 #define SPCA50X_GLOBAL_MISC3 0x03 /* 505 */ [all …]
|
/linux/fs/xfs/ |
H A D | xfs_dahash_test.c | 20 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30, 21 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4, 22 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60, 23 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c, 24 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4, 25 0xe9, 0x70, 0x51, 0x8c, 0x7f, 0x95, 0x6f, 0x1a, 26 0x56, 0xa1, 0x5c, 0x27, 0x03, 0x67, 0x9f, 0x3a, 27 0xe2, 0x31, 0x11, 0x29, 0x6b, 0x98, 0xfc, 0xc4, 28 0x53, 0x24, 0xc5, 0x8b, 0xce, 0x47, 0xb2, 0xb9, 29 0x32, 0xcb, 0xc1, 0xd0, 0x03, 0x57, 0x4e, 0xd4, [all …]
|
/linux/arch/arm/mach-orion5x/ |
H A D | common.h | 10 #define ORION_MBUS_PCIE_MEM_TARGET 0x04 11 #define ORION_MBUS_PCIE_MEM_ATTR 0x59 12 #define ORION_MBUS_PCIE_IO_TARGET 0x04 13 #define ORION_MBUS_PCIE_IO_ATTR 0x51 14 #define ORION_MBUS_PCIE_WA_TARGET 0x04 15 #define ORION_MBUS_PCIE_WA_ATTR 0x79 16 #define ORION_MBUS_PCI_MEM_TARGET 0x03 17 #define ORION_MBUS_PCI_MEM_ATTR 0x59 18 #define ORION_MBUS_PCI_IO_TARGET 0x03 19 #define ORION_MBUS_PCI_IO_ATTR 0x51 [all …]
|
/linux/lib/crypto/ |
H A D | aesgcm.c | 43 * Returns: 0 on success, or -EINVAL if @keysize or @authsize contain values 60 return 0; in aesgcm_expandkey() 67 while (len > 0) { in aesgcm_ghash() 114 while (len > 0) { in aesgcm_crypt() 376 "\x3f\xec\x1d\x25\x3c\x51\xd2\x03" 403 "\x78\x1f\x51\x07\xe3\x9a\x13\x4e" 437 "\x51\x28\x9b\x7a\xeb\xaf\xb8\x2f" 446 "\xb5\x9f\x23\x28\x60\xe7\x20\x51" 457 "\x3f\x73\x09\xe2\x45\x56\x31\x51" 497 "\x51\x4 [all...] |
H A D | aescfb.c | 48 while (len > 0) { in aescfb_encrypt() 76 aescfb_encrypt_block(ctx, ks[0], iv); in aescfb_decrypt() 78 for (int i = 0; len > 0; i ^= 1) { in aescfb_decrypt() 127 "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51" 151 "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51" 176 "\x9e\xb7\x6f\xac\x45\xaf\x8e\x51" 217 for (int i = 0; i < ARRAY_SIZE(aescfb_tv); i++) { in libaescfb_init() 249 return 0; in libaescfb_init()
|
H A D | chacha20poly1305-selftest.c | 31 0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74, 32 0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20, 33 0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66, 34 0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65, 35 0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69, 36 0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20, 37 0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20, 38 0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d, 39 0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e, 40 0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65, [all …]
|
/linux/drivers/regulator/ |
H A D | act8865-regulator.c | 27 #define ACT8600_SYS_MODE 0x00 28 #define ACT8600_SYS_CTRL 0x01 29 #define ACT8600_DCDC1_VSET 0x10 30 #define ACT8600_DCDC1_CTRL 0x12 31 #define ACT8600_DCDC2_VSET 0x20 32 #define ACT8600_DCDC2_CTRL 0x22 33 #define ACT8600_DCDC3_VSET 0x30 34 #define ACT8600_DCDC3_CTRL 0x32 35 #define ACT8600_SUDCDC4_VSET 0x40 36 #define ACT8600_SUDCDC4_CTRL 0x41 [all …]
|
/linux/crypto/ |
H A D | kdf_sp800108.c | 25 int err = 0; in crypto_kdf108_ctr_generate() 39 for (i = 0; i < info_nvec; i++) { in crypto_kdf108_ctr_generate() 108 .ikmlen = 0, 112 "\x68\x59\xbf\x1b\x1c\xf9\x51\xb7" 114 "\x64\xa1\x45\xfa\xb2\x5e\x51\x7b" 131 return 0; in crypto_kdf108_init() 133 ret = kdf_test(&kdf_ctr_hmac_sha256_tv_template[0], "hmac(sha256)", in crypto_kdf108_init()
|
/linux/include/linux/mfd/ |
H A D | rohm-bd96801.h | 7 #define BD96801_REG_SSCG_CTRL 0x09 8 #define BD96801_REG_SHD_INTB 0x20 9 #define BD96801_LDO5_VOL_LVL_REG 0x2c 10 #define BD96801_LDO6_VOL_LVL_REG 0x2d 11 #define BD96801_LDO7_VOL_LVL_REG 0x2e 12 #define BD96801_REG_BUCK_OVP 0x30 13 #define BD96801_REG_BUCK_OVD 0x35 14 #define BD96801_REG_LDO_OVP 0x31 15 #define BD96801_REG_LDO_OVD 0x36 16 #define BD96801_REG_BOOT_OVERTIME 0x3a [all …]
|
/linux/net/wireless/certs/ |
H A D | sforshee.hex | 2 0x30, 0x82, 0x02, 0xa4, 0x30, 0x82, 0x01, 0x8c, 3 0x02, 0x09, 0x00, 0xb2, 0x8d, 0xdf, 0x47, 0xae, 4 0xf9, 0xce, 0xa7, 0x30, 0x0d, 0x06, 0x09, 0x2a, 5 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x0b, 6 0x05, 0x00, 0x30, 0x13, 0x31, 0x11, 0x30, 0x0f, 7 0x06, 0x03, 0x55, 0x04, 0x03, 0x0c, 0x08, 0x73, 8 0x66, 0x6f, 0x72, 0x73, 0x68, 0x65, 0x65, 0x30, 9 0x20, 0x17, 0x0d, 0x31, 0x37, 0x31, 0x30, 0x30, 10 0x36, 0x31, 0x39, 0x34, 0x30, 0x33, 0x35, 0x5a, 11 0x18, 0x0f, 0x32, 0x31, 0x31, 0x37, 0x30, 0x39, [all …]
|
/linux/drivers/hid/ |
H A D | hid-lg3ff.c | 21 * 0 - seems to be command field 31 * 0 0 127 127 makes the joystick autocenter hard 33 * 127 0 127 127 makes the joystick loose on the right, 36 * -127 0 -127 -127 makes the joystick loose on the left, 39 * 0 0 -127 -127 makes the joystick rattle very hard 56 memset(report->field[0]->value, 0, in hid_lg3ff_play() 57 sizeof(__s32) * report->field[0]->report_count); in hid_lg3ff_play() 63 * 0 is center (different then other logitech) in hid_lg3ff_play() 69 report->field[0]->value[0] = 0x51; in hid_lg3ff_play() 75 report->field[0]->value[1] = (unsigned char)(-x); in hid_lg3ff_play() [all …]
|
/linux/drivers/net/wireless/broadcom/b43/ |
H A D | radio_2056.h | 9 #define B2056_SYN (0x0 << 12) 10 #define B2056_TX0 (0x2 << 12) 11 #define B2056_TX1 (0x3 << 12) 12 #define B2056_RX0 (0x6 << 12) 13 #define B2056_RX1 (0x7 << 12) 14 #define B2056_ALLTX (0xE << 12) 15 #define B2056_ALLRX (0xF << 12) 17 #define B2056_SYN_RESERVED_ADDR0 0x00 18 #define B2056_SYN_IDCODE 0x01 19 #define B2056_SYN_RESERVED_ADDR2 0x02 [all …]
|