/freebsd/sys/contrib/device-tree/Bindings/powerpc/4xx/ |
H A D | ppc440spe-adma.txt | 23 reg = <0x00000004 0x00100000 0x100>; 24 dcr-reg = <0x060 0x020>; 34 (typically 0x0 and 0x1 for DMA0 and DMA1) 46 cell-index = <0>; 47 reg = <0x00000004 0x00100100 0x100>; 48 dcr-reg = <0x060 0x020>; 50 interrupts = <0 1>; 52 #address-cells = <0>; 53 #size-cells = <0>; 55 0 &UIC0 0x14 4 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imxrt1170-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0 18 #define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0 19 #define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0 20 #define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0 21 #define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0 22 #define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0 23 #define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0 24 #define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0 26 #define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0 [all …]
|
H A D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0 14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0 15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0 16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0 17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0 18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0 19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0 20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0 21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0 22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0 [all …]
|
H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0 18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0 19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1 20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0 21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0 22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0 24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0 25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0 26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1 [all …]
|
H A D | imx51-pinfunc.h | 13 #define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0 14 #define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0 15 #define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0 16 #define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0 17 #define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0 18 #define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0 19 #define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0 20 #define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0 21 #define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0 22 #define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0 [all …]
|
H A D | imx25-pinfunc.h | 16 #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 17 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 19 #define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000 20 #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 21 #define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 23 #define MX25_PAD_A14__A14 0x010 0x230 0x000 0x00 0x000 24 #define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x05 0x000 25 #define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x06 0x000 26 #define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x07 0x000 28 #define MX25_PAD_A15__A15 0x014 0x234 0x000 0x00 0x000 [all …]
|
H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/vf/ |
H A D | vf610-pinfunc.h | 14 #define ALT0 0x0 15 #define ALT1 0x1 16 #define ALT2 0x2 17 #define ALT3 0x3 18 #define ALT4 0x4 19 #define ALT5 0x5 20 #define ALT6 0x6 21 #define ALT7 0x7 24 #define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 25 #define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 [all …]
|
/freebsd/sys/amd64/conf/ |
H A D | GENERIC.hints | 1 hint.atkbdc.0.at="isa" 2 hint.atkbdc.0.port="0x060" 3 hint.atkbd.0.at="atkbdc" 4 hint.atkbd.0.irq="1" 5 hint.psm.0.at="atkbdc" 6 hint.psm.0.irq="12" 7 hint.sc.0.at="isa" 8 hint.sc.0.flags="0x100" 9 hint.uart.0.at="acpi" 10 hint.uart.0.port="0x3F8" [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/display/tegra/ |
H A D | nvidia,tegra114-mipi.txt | 21 reg = <0x700e3000 0x100>; 35 nvidia,mipi-calibrate = <&mipi 0x060>;
|
H A D | nvidia,tegra114-mipi.yaml | 15 pattern: "^mipi@[0-9a-f]+$" 58 reg = <0x700e3000 0x100>; 66 reg = <0x54300000 0x00040000>; 73 nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
|
/freebsd/sys/i386/conf/ |
H A D | GENERIC.hints | 1 hint.fdc.0.at="isa" 2 hint.fdc.0.port="0x3F0" 3 hint.fdc.0.irq="6" 4 hint.fdc.0.drq="2" 5 hint.fd.0.at="fdc0" 6 hint.fd.0.drive="0" 9 hint.ata.0.at="isa" 10 hint.ata.0.port="0x1F0" 11 hint.ata.0.irq="14" 13 hint.ata.1.port="0x170" [all …]
|
/freebsd/sys/contrib/device-tree/src/powerpc/ |
H A D | icon.dts | 18 dcr-parent = <&{/cpus/cpu@0}>; 29 #size-cells = <0>; 31 cpu@0 { 34 reg = <0x00000000>; 35 clock-frequency = <0>; /* Filled in by U-Boot */ 36 timebase-frequency = <0>; /* Filled in by U-Boot */ 49 reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ 55 cell-index = <0>; 56 dcr-reg = <0x0c0 0x009>; 57 #address-cells = <0>; [all …]
|
H A D | katmai.dts | 22 dcr-parent = <&{/cpus/cpu@0}>; 33 #size-cells = <0>; 35 cpu@0 { 38 reg = <0x00000000>; 39 clock-frequency = <0>; /* Filled in by zImage */ 40 timebase-frequency = <0>; /* Filled in by zImage */ 53 reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ 59 cell-index = <0>; 60 dcr-reg = <0x0c0 0x009>; 61 #address-cells = <0>; [all …]
|
/freebsd/sys/isa/ |
H A D | isareg.h | 46 #define IO_ISABEGIN 0x000 /* 0x000 - Beginning of I/O Registers */ 47 #define IO_ICU1 0x020 /* 8259A Interrupt Controller #1 */ 48 #define IO_KBD 0x060 /* 8042 Keyboard */ 49 #define IO_RTC 0x070 /* RTC */ 50 #define IO_ICU2 0x0A0 /* 8259A Interrupt Controller #2 */ 52 #define IO_MDA 0x3B0 /* Monochome Adapter */ 53 #define IO_VGA 0x3C0 /* E/VGA Ports */ 54 #define IO_CGA 0x3D0 /* CGA Ports */
|
/freebsd/sys/arm/freescale/ |
H A D | fsl_ocotpreg.h | 32 #define FSL_OCOTP_CTRL 0x000 33 #define FSL_OCOTP_CTRL_SET 0x004 34 #define FSL_OCOTP_CTRL_CLR 0x008 35 #define FSL_OCOTP_CTRL_TOG 0x00C 36 #define FSL_OCOTP_TIMING 0x010 37 #define FSL_OCOTP_DATA 0x020 38 #define FSL_OCOTP_READ_CTRL 0x030 39 #define FSL_OCOTP_READ_FUSE_DATA 0x040 40 #define FSL_OCOTP_SW_STICKY 0x050 41 #define FSL_OCOTP_SCS 0x060 [all …]
|
/freebsd/sys/dev/virtio/mmio/ |
H A D | virtio_mmio.h | 59 #define VIRTIO_MMIO_MAGIC_VALUE 0x000 60 #define VIRTIO_MMIO_VERSION 0x004 61 #define VIRTIO_MMIO_DEVICE_ID 0x008 62 #define VIRTIO_MMIO_VENDOR_ID 0x00c 63 #define VIRTIO_MMIO_HOST_FEATURES 0x010 64 #define VIRTIO_MMIO_HOST_FEATURES_SEL 0x014 65 #define VIRTIO_MMIO_GUEST_FEATURES 0x020 66 #define VIRTIO_MMIO_GUEST_FEATURES_SEL 0x024 67 #define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028 /* version 1 only */ 68 #define VIRTIO_MMIO_QUEUE_SEL 0x030 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
H A D | imx8mp-pinfunc.h | 13 #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 14 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 15 #define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 16 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 17 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 18 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 19 #define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 20 #define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 21 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 22 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 [all …]
|
H A D | imx8mq-pinfunc.h | 15 #define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ 0x014 0x27C 0x000 0x0 0… 16 #define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ 0x018 0x280 0x000 0x0 0… 17 #define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF 0x01C 0x284 0x000 0x0 0… 18 #define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B 0x020 0x288 0x000 0x0 0… 19 #define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B 0x024 0x28C 0x000 0x0 0… 20 #define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0… 21 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0… 22 #define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0… 23 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0… 24 #define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0… [all …]
|
H A D | imx8mm-pinfunc.h | 14 #define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0… 15 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0… 16 #define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0… 17 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0… 18 #define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0… 19 #define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0… 20 #define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0… 21 #define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0… 22 #define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0… 23 #define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0… [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/hisilicon/ |
H A D | hikey970-pinctrl.dtsi | 16 reg = <0x0 0xe896c000 0x0 0x72c>; 18 #gpio-range-cells = <0x3>; 19 pinctrl-single,register-width = <0x20>; 20 pinctrl-single,function-mask = <0x7>; 22 pinctrl-single,gpio-range = <&range 0 82 0>; 26 0x054 MUX_M2 /* UART0_RXD */ 27 0x058 MUX_M2 /* UART0_TXD */ 33 0x700 MUX_M2 /* UART2_CTS_N */ 34 0x704 MUX_M2 /* UART2_RTS_N */ 35 0x708 MUX_M2 /* UART2_RXD */ [all …]
|
/freebsd/share/man/man4/ |
H A D | atkbdc.4 | 43 .Cd hint.atkbdc.0.at="isa" 44 .Cd hint.atkbdc.0.port="0x060"
|
H A D | atkbd.4 | 41 .Cd hint.atkbd.0.at="atkbdc" 42 .Cd hint.atkbd.0.irq="1" 111 Ins and Numpad 0 (without NumLock) 157 .It bit 0 (FAIL_IF_NO_KBD) 202 .Dl hint.atkbdc.0.at="isa" 203 .Dl hint.atkbdc.0.port="0x060" 204 .Dl hint.atkbd.0.at="atkbdc" 205 .Dl hint.atkbd.0.irq="1"
|
/freebsd/sys/arm/ti/ |
H A D | ti_adcreg.h | 30 #define ADC_REVISION 0x000 31 #define ADC_REV_SCHEME_MSK 0xc0000000 33 #define ADC_REV_FUNC_MSK 0x0fff0000 35 #define ADC_REV_RTL_MSK 0x0000f800 37 #define ADC_REV_MAJOR_MSK 0x00000700 39 #define ADC_REV_CUSTOM_MSK 0x000000c0 41 #define ADC_REV_MINOR_MSK 0x0000003f 42 #define ADC_SYSCFG 0x010 43 #define ADC_SYSCFG_IDLE_MSK 0x000000c0 45 #define ADC_IRQSTATUS_RAW 0x024 [all …]
|
/freebsd/sys/arm/freescale/imx/ |
H A D | imx6_anatopreg.h | 32 #define IMX6_ANALOG_CCM_PLL_ARM 0x000 33 #define IMX6_ANALOG_CCM_PLL_ARM_SET 0x004 34 #define IMX6_ANALOG_CCM_PLL_ARM_CLR 0x008 35 #define IMX6_ANALOG_CCM_PLL_ARM_TOG 0x00C 36 #define IMX6_ANALOG_CCM_PLL_ARM_DIV_MASK 0x7F 39 #define IMX6_ANALOG_CCM_PLL_ARM_CLK_SRC_MASK (0x03 << 16) 40 #define IMX6_ANALOG_CCM_PLL_USB1 0x010 41 #define IMX6_ANALOG_CCM_PLL_USB1_SET 0x014 42 #define IMX6_ANALOG_CCM_PLL_USB1_CLR 0x018 43 #define IMX6_ANALOG_CCM_PLL_USB1_TOG 0x01C [all …]
|