xref: /linux/drivers/net/ethernet/toshiba/ps3_gelic_net.c (revision 8f7aa3d3c7323f4ca2768a9e74ebbe359c4f8f88)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  PS3 gelic network driver.
4  *
5  * Copyright (C) 2007 Sony Computer Entertainment Inc.
6  * Copyright 2006, 2007 Sony Corporation
7  *
8  * This file is based on: spider_net.c
9  *
10  * (C) Copyright IBM Corp. 2005
11  *
12  * Authors : Utz Bacher <utz.bacher@de.ibm.com>
13  *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
14  */
15 
16 #undef DEBUG
17 
18 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22 
23 #include <linux/etherdevice.h>
24 #include <linux/ethtool.h>
25 #include <linux/if_vlan.h>
26 
27 #include <linux/in.h>
28 #include <linux/ip.h>
29 #include <linux/tcp.h>
30 
31 #include <linux/dma-mapping.h>
32 #include <net/checksum.h>
33 #include <asm/firmware.h>
34 #include <asm/ps3.h>
35 #include <asm/lv1call.h>
36 
37 #include "ps3_gelic_net.h"
38 #include "ps3_gelic_wireless.h"
39 
40 #define DRV_NAME "Gelic Network Driver"
41 #define DRV_VERSION "2.0"
42 
43 MODULE_AUTHOR("SCE Inc.");
44 MODULE_DESCRIPTION("Gelic Network driver");
45 MODULE_LICENSE("GPL");
46 
47 
48 /* set irq_mask */
49 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
50 {
51 	int status;
52 
53 	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
54 					    mask, 0);
55 	if (status)
56 		dev_info(ctodev(card),
57 			 "%s failed %d\n", __func__, status);
58 	return status;
59 }
60 
61 static void gelic_card_rx_irq_on(struct gelic_card *card)
62 {
63 	card->irq_mask |= GELIC_CARD_RXINT;
64 	gelic_card_set_irq_mask(card, card->irq_mask);
65 }
66 static void gelic_card_rx_irq_off(struct gelic_card *card)
67 {
68 	card->irq_mask &= ~GELIC_CARD_RXINT;
69 	gelic_card_set_irq_mask(card, card->irq_mask);
70 }
71 
72 static void gelic_card_get_ether_port_status(struct gelic_card *card,
73 					     int inform)
74 {
75 	u64 v2;
76 	struct net_device *ether_netdev;
77 
78 	lv1_net_control(bus_id(card), dev_id(card),
79 			GELIC_LV1_GET_ETH_PORT_STATUS,
80 			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
81 			&card->ether_port_status, &v2);
82 
83 	if (inform) {
84 		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
85 		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
86 			netif_carrier_on(ether_netdev);
87 		else
88 			netif_carrier_off(ether_netdev);
89 	}
90 }
91 
92 /**
93  * gelic_descr_get_status -- returns the status of a descriptor
94  * @descr: descriptor to look at
95  *
96  * returns the status as in the hw_regs.dmac_cmd_status field of the descriptor
97  */
98 static enum gelic_descr_dma_status
99 gelic_descr_get_status(struct gelic_descr *descr)
100 {
101 	return be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
102 		GELIC_DESCR_DMA_STAT_MASK;
103 }
104 
105 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
106 {
107 	int status;
108 	u64 v1, v2;
109 
110 	status = lv1_net_control(bus_id(card), dev_id(card),
111 				 GELIC_LV1_SET_NEGOTIATION_MODE,
112 				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
113 	if (status) {
114 		pr_info("%s: failed setting negotiation mode %d\n", __func__,
115 			status);
116 		return -EBUSY;
117 	}
118 
119 	card->link_mode = mode;
120 	return 0;
121 }
122 
123 /**
124  * gelic_card_disable_txdmac - disables the transmit DMA controller
125  * @card: card structure
126  *
127  * gelic_card_disable_txdmac terminates processing on the DMA controller by
128  * turing off DMA and issuing a force end
129  */
130 static void gelic_card_disable_txdmac(struct gelic_card *card)
131 {
132 	int status;
133 
134 	/* this hvc blocks until the DMA in progress really stopped */
135 	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
136 	if (status)
137 		dev_err(ctodev(card),
138 			"lv1_net_stop_tx_dma failed, status=%d\n", status);
139 }
140 
141 /**
142  * gelic_card_enable_rxdmac - enables the receive DMA controller
143  * @card: card structure
144  *
145  * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
146  * in the GDADMACCNTR register
147  */
148 static void gelic_card_enable_rxdmac(struct gelic_card *card)
149 {
150 	int status;
151 
152 #ifdef DEBUG
153 	if (gelic_descr_get_status(card->rx_chain.head) !=
154 	    GELIC_DESCR_DMA_CARDOWNED) {
155 		printk(KERN_ERR "%s: status=%x\n", __func__,
156 		       be32_to_cpu(card->rx_chain.head->hw_regs.dmac_cmd_status));
157 		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
158 		       be32_to_cpu(card->rx_chain.head->hw_regs.next_descr_addr));
159 		printk(KERN_ERR "%s: head=%p\n", __func__,
160 		       card->rx_chain.head);
161 	}
162 #endif
163 	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
164 				card->rx_chain.head->link.cpu_addr, 0);
165 	if (status)
166 		dev_info(ctodev(card),
167 			 "lv1_net_start_rx_dma failed, status=%d\n", status);
168 }
169 
170 /**
171  * gelic_card_disable_rxdmac - disables the receive DMA controller
172  * @card: card structure
173  *
174  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
175  * turing off DMA and issuing a force end
176  */
177 static void gelic_card_disable_rxdmac(struct gelic_card *card)
178 {
179 	int status;
180 
181 	/* this hvc blocks until the DMA in progress really stopped */
182 	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
183 	if (status)
184 		dev_err(ctodev(card),
185 			"lv1_net_stop_rx_dma failed, %d\n", status);
186 }
187 
188 /**
189  * gelic_descr_set_status -- sets the status of a descriptor
190  * @descr: descriptor to change
191  * @status: status to set in the descriptor
192  *
193  * changes the status to the specified value. Doesn't change other bits
194  * in the status
195  */
196 static void gelic_descr_set_status(struct gelic_descr *descr,
197 				   enum gelic_descr_dma_status status)
198 {
199 	descr->hw_regs.dmac_cmd_status = cpu_to_be32(status |
200 			(be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
201 			 ~GELIC_DESCR_DMA_STAT_MASK));
202 	/*
203 	 * dma_cmd_status field is used to indicate whether the descriptor
204 	 * is valid or not.
205 	 * Usually caller of this function wants to inform that to the
206 	 * hardware, so we assure here the hardware sees the change.
207 	 */
208 	wmb();
209 }
210 
211 /**
212  * gelic_card_reset_chain - reset status of a descriptor chain
213  * @card: card structure
214  * @chain: address of chain
215  * @start_descr: address of descriptor array
216  *
217  * Reset the status of dma descriptors to ready state
218  * and re-initialize the hardware chain for later use
219  */
220 static void gelic_card_reset_chain(struct gelic_card *card,
221 				   struct gelic_descr_chain *chain,
222 				   struct gelic_descr *start_descr)
223 {
224 	struct gelic_descr *descr;
225 
226 	for (descr = start_descr; start_descr != descr->next; descr++) {
227 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
228 		descr->hw_regs.next_descr_addr
229 			= cpu_to_be32(descr->next->link.cpu_addr);
230 	}
231 
232 	chain->head = start_descr;
233 	chain->tail = (descr - 1);
234 
235 	(descr - 1)->hw_regs.next_descr_addr = 0;
236 }
237 
238 void gelic_card_up(struct gelic_card *card)
239 {
240 	pr_debug("%s: called\n", __func__);
241 	mutex_lock(&card->updown_lock);
242 	if (atomic_inc_return(&card->users) == 1) {
243 		pr_debug("%s: real do\n", __func__);
244 		/* enable irq */
245 		gelic_card_set_irq_mask(card, card->irq_mask);
246 		/* start rx */
247 		gelic_card_enable_rxdmac(card);
248 
249 		napi_enable(&card->napi);
250 	}
251 	mutex_unlock(&card->updown_lock);
252 	pr_debug("%s: done\n", __func__);
253 }
254 
255 void gelic_card_down(struct gelic_card *card)
256 {
257 	u64 mask;
258 	pr_debug("%s: called\n", __func__);
259 	mutex_lock(&card->updown_lock);
260 	if (atomic_dec_if_positive(&card->users) == 0) {
261 		pr_debug("%s: real do\n", __func__);
262 		napi_disable(&card->napi);
263 		timer_delete_sync(&card->rx_oom_timer);
264 		/*
265 		 * Disable irq. Wireless interrupts will
266 		 * be disabled later if any
267 		 */
268 		mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
269 					 GELIC_CARD_WLAN_COMMAND_COMPLETED);
270 		gelic_card_set_irq_mask(card, mask);
271 		/* stop rx */
272 		gelic_card_disable_rxdmac(card);
273 		gelic_card_reset_chain(card, &card->rx_chain,
274 				       card->descr + GELIC_NET_TX_DESCRIPTORS);
275 		/* stop tx */
276 		gelic_card_disable_txdmac(card);
277 	}
278 	mutex_unlock(&card->updown_lock);
279 	pr_debug("%s: done\n", __func__);
280 }
281 
282 /**
283  * gelic_card_free_chain - free descriptor chain
284  * @card: card structure
285  * @descr_in: address of desc
286  */
287 static void gelic_card_free_chain(struct gelic_card *card,
288 				  struct gelic_descr *descr_in)
289 {
290 	struct gelic_descr *descr;
291 
292 	for (descr = descr_in; descr && descr->link.cpu_addr;
293 		descr = descr->next) {
294 		dma_unmap_single(ctodev(card), descr->link.cpu_addr,
295 				 descr->link.size, DMA_BIDIRECTIONAL);
296 		descr->link.cpu_addr = 0;
297 		descr->link.size = 0;
298 	}
299 }
300 
301 /**
302  * gelic_card_init_chain - links descriptor chain
303  * @card: card structure
304  * @chain: address of chain
305  * @start_descr: address of descriptor array
306  * @no: number of descriptors
307  *
308  * we manage a circular list that mirrors the hardware structure,
309  * except that the hardware uses bus addresses.
310  *
311  * returns 0 on success, <0 on failure
312  */
313 static int gelic_card_init_chain(struct gelic_card *card,
314 				 struct gelic_descr_chain *chain,
315 				 struct gelic_descr *start_descr, int no)
316 {
317 	int i;
318 	struct gelic_descr *descr;
319 
320 	descr = start_descr;
321 	memset(descr, 0, sizeof(*descr) * no);
322 
323 	/* set up the hardware pointers in each descriptor */
324 	for (i = 0; i < no; i++, descr++) {
325 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
326 
327 		descr->link.size = sizeof(struct gelic_hw_regs);
328 		descr->link.cpu_addr = dma_map_single(ctodev(card), descr,
329 					  descr->link.size, DMA_BIDIRECTIONAL);
330 
331 		if (dma_mapping_error(ctodev(card), descr->link.cpu_addr)) {
332 			for (i--, descr--; 0 <= i; i--, descr--) {
333 				dma_unmap_single(ctodev(card),
334 					descr->link.cpu_addr, descr->link.size,
335 					DMA_BIDIRECTIONAL);
336 			}
337 			return -ENOMEM;
338 		}
339 
340 		descr->next = descr + 1;
341 		descr->prev = descr - 1;
342 	}
343 	/* make them as ring */
344 	(descr - 1)->next = start_descr;
345 	start_descr->prev = (descr - 1);
346 
347 	/* chain bus addr of hw descriptor */
348 	descr = start_descr;
349 	for (i = 0; i < no; i++, descr++) {
350 		descr->hw_regs.next_descr_addr =
351 			cpu_to_be32(descr->next->link.cpu_addr);
352 	}
353 
354 	chain->head = start_descr;
355 	chain->tail = start_descr;
356 
357 	/* do not chain last hw descriptor */
358 	(descr - 1)->hw_regs.next_descr_addr = 0;
359 
360 	return 0;
361 }
362 
363 /**
364  * gelic_descr_prepare_rx - reinitializes a rx descriptor
365  * @card: card structure
366  * @descr: descriptor to re-init
367  * @napi_mode: is it running in napi poll
368  *
369  * return 0 on success, <0 on failure
370  *
371  * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
372  * Activate the descriptor state-wise
373  *
374  * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
375  * must be a multiple of GELIC_NET_RXBUF_ALIGN.
376  */
377 static int gelic_descr_prepare_rx(struct gelic_card *card,
378 				  struct gelic_descr *descr,
379 				  bool napi_mode)
380 {
381 	static const unsigned int rx_skb_size =
382 		ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
383 		GELIC_NET_RXBUF_ALIGN - 1;
384 	dma_addr_t cpu_addr;
385 	int offset;
386 
387 	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
388 		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
389 
390 	descr->hw_regs.dmac_cmd_status = 0;
391 	descr->hw_regs.result_size = 0;
392 	descr->hw_regs.valid_size = 0;
393 	descr->hw_regs.data_error = 0;
394 	descr->hw_regs.payload.dev_addr = 0;
395 	descr->hw_regs.payload.size = 0;
396 
397 	if (napi_mode)
398 		descr->skb = napi_alloc_skb(&card->napi, rx_skb_size);
399 	else
400 		descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
401 	if (!descr->skb) {
402 		descr->hw_regs.payload.dev_addr = 0; /* tell DMAC don't touch memory */
403 		return -ENOMEM;
404 	}
405 
406 	offset = ((unsigned long)descr->skb->data) &
407 		(GELIC_NET_RXBUF_ALIGN - 1);
408 	if (offset)
409 		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
410 	/* io-mmu-map the skb */
411 	cpu_addr = dma_map_single(ctodev(card), descr->skb->data,
412 				  GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);
413 	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
414 	if (dma_mapping_error(ctodev(card), cpu_addr)) {
415 		dev_kfree_skb_any(descr->skb);
416 		descr->skb = NULL;
417 		dev_info(ctodev(card),
418 			 "%s:Could not iommu-map rx buffer\n", __func__);
419 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
420 		return -ENOMEM;
421 	}
422 
423 	descr->hw_regs.payload.size = cpu_to_be32(GELIC_NET_MAX_FRAME);
424 	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
425 
426 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
427 
428 	return 0;
429 }
430 
431 /**
432  * gelic_card_release_rx_chain - free all skb of rx descr
433  * @card: card structure
434  *
435  */
436 static void gelic_card_release_rx_chain(struct gelic_card *card)
437 {
438 	struct gelic_descr *descr = card->rx_chain.head;
439 
440 	do {
441 		if (descr->skb) {
442 			dma_unmap_single(ctodev(card),
443 				be32_to_cpu(descr->hw_regs.payload.dev_addr),
444 				descr->skb->len,
445 				DMA_FROM_DEVICE);
446 			descr->hw_regs.payload.dev_addr = 0;
447 			descr->hw_regs.payload.size = 0;
448 			dev_kfree_skb_any(descr->skb);
449 			descr->skb = NULL;
450 			gelic_descr_set_status(descr,
451 				GELIC_DESCR_DMA_NOT_IN_USE);
452 		}
453 		descr = descr->next;
454 	} while (descr != card->rx_chain.head);
455 }
456 
457 /**
458  * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
459  * @card: card structure
460  *
461  * fills all descriptors in the rx chain: allocates skbs
462  * and iommu-maps them.
463  * returns 0 on success, < 0 on failure
464  */
465 static int gelic_card_fill_rx_chain(struct gelic_card *card)
466 {
467 	struct gelic_descr *descr = card->rx_chain.head;
468 	int ret;
469 
470 	do {
471 		if (!descr->skb) {
472 			ret = gelic_descr_prepare_rx(card, descr, false);
473 			if (ret)
474 				goto rewind;
475 		}
476 		descr = descr->next;
477 	} while (descr != card->rx_chain.head);
478 
479 	return 0;
480 rewind:
481 	gelic_card_release_rx_chain(card);
482 	return ret;
483 }
484 
485 /**
486  * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
487  * @card: card structure
488  *
489  * returns 0 on success, < 0 on failure
490  */
491 static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
492 {
493 	struct gelic_descr_chain *chain;
494 	int ret;
495 	chain = &card->rx_chain;
496 	ret = gelic_card_fill_rx_chain(card);
497 	chain->tail = card->rx_top->prev; /* point to the last */
498 	return ret;
499 }
500 
501 /**
502  * gelic_descr_release_tx - processes a used tx descriptor
503  * @card: card structure
504  * @descr: descriptor to release
505  *
506  * releases a used tx descriptor (unmapping, freeing of skb)
507  */
508 static void gelic_descr_release_tx(struct gelic_card *card,
509 				       struct gelic_descr *descr)
510 {
511 	struct sk_buff *skb = descr->skb;
512 
513 	BUG_ON(!(be32_to_cpu(descr->hw_regs.data_status) & GELIC_DESCR_TX_TAIL));
514 
515 	dma_unmap_single(ctodev(card),
516 		be32_to_cpu(descr->hw_regs.payload.dev_addr), skb->len,
517 		DMA_TO_DEVICE);
518 	dev_kfree_skb_any(skb);
519 
520 	descr->hw_regs.payload.dev_addr = 0;
521 	descr->hw_regs.payload.size = 0;
522 	descr->hw_regs.next_descr_addr = 0;
523 	descr->hw_regs.result_size = 0;
524 	descr->hw_regs.valid_size = 0;
525 	descr->hw_regs.data_status = 0;
526 	descr->hw_regs.data_error = 0;
527 	descr->skb = NULL;
528 
529 	/* set descr status */
530 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
531 }
532 
533 static void gelic_card_stop_queues(struct gelic_card *card)
534 {
535 	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
536 
537 	if (card->netdev[GELIC_PORT_WIRELESS])
538 		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
539 }
540 static void gelic_card_wake_queues(struct gelic_card *card)
541 {
542 	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
543 
544 	if (card->netdev[GELIC_PORT_WIRELESS])
545 		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
546 }
547 /**
548  * gelic_card_release_tx_chain - processes sent tx descriptors
549  * @card: adapter structure
550  * @stop: net_stop sequence
551  *
552  * releases the tx descriptors that gelic has finished with
553  */
554 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
555 {
556 	struct gelic_descr_chain *tx_chain;
557 	enum gelic_descr_dma_status status;
558 	struct net_device *netdev;
559 	int release = 0;
560 
561 	for (tx_chain = &card->tx_chain;
562 	     tx_chain->head != tx_chain->tail && tx_chain->tail;
563 	     tx_chain->tail = tx_chain->tail->next) {
564 		status = gelic_descr_get_status(tx_chain->tail);
565 		netdev = tx_chain->tail->skb->dev;
566 		switch (status) {
567 		case GELIC_DESCR_DMA_RESPONSE_ERROR:
568 		case GELIC_DESCR_DMA_PROTECTION_ERROR:
569 		case GELIC_DESCR_DMA_FORCE_END:
570 			if (printk_ratelimit())
571 				dev_info(ctodev(card),
572 					 "%s: forcing end of tx descriptor " \
573 					 "with status %x\n",
574 					 __func__, status);
575 			netdev->stats.tx_dropped++;
576 			break;
577 
578 		case GELIC_DESCR_DMA_COMPLETE:
579 			if (tx_chain->tail->skb) {
580 				netdev->stats.tx_packets++;
581 				netdev->stats.tx_bytes +=
582 					tx_chain->tail->skb->len;
583 			}
584 			break;
585 
586 		case GELIC_DESCR_DMA_CARDOWNED:
587 			/* pending tx request */
588 		default:
589 			/* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
590 			if (!stop)
591 				goto out;
592 		}
593 		gelic_descr_release_tx(card, tx_chain->tail);
594 		release ++;
595 	}
596 out:
597 	if (!stop && release)
598 		gelic_card_wake_queues(card);
599 }
600 
601 /**
602  * gelic_net_set_multi - sets multicast addresses and promisc flags
603  * @netdev: interface device structure
604  *
605  * gelic_net_set_multi configures multicast addresses as needed for the
606  * netdev interface. It also sets up multicast, allmulti and promisc
607  * flags appropriately
608  */
609 void gelic_net_set_multi(struct net_device *netdev)
610 {
611 	struct gelic_card *card = netdev_card(netdev);
612 	struct netdev_hw_addr *ha;
613 	unsigned int i;
614 	uint8_t *p;
615 	u64 addr;
616 	int status;
617 
618 	/* clear all multicast address */
619 	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
620 						  0, 1);
621 	if (status)
622 		dev_err(ctodev(card),
623 			"lv1_net_remove_multicast_address failed %d\n",
624 			status);
625 	/* set broadcast address */
626 	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
627 					       GELIC_NET_BROADCAST_ADDR, 0);
628 	if (status)
629 		dev_err(ctodev(card),
630 			"lv1_net_add_multicast_address failed, %d\n",
631 			status);
632 
633 	if ((netdev->flags & IFF_ALLMULTI) ||
634 	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
635 		status = lv1_net_add_multicast_address(bus_id(card),
636 						       dev_id(card),
637 						       0, 1);
638 		if (status)
639 			dev_err(ctodev(card),
640 				"lv1_net_add_multicast_address failed, %d\n",
641 				status);
642 		return;
643 	}
644 
645 	/* set multicast addresses */
646 	netdev_for_each_mc_addr(ha, netdev) {
647 		addr = 0;
648 		p = ha->addr;
649 		for (i = 0; i < ETH_ALEN; i++) {
650 			addr <<= 8;
651 			addr |= *p++;
652 		}
653 		status = lv1_net_add_multicast_address(bus_id(card),
654 						       dev_id(card),
655 						       addr, 0);
656 		if (status)
657 			dev_err(ctodev(card),
658 				"lv1_net_add_multicast_address failed, %d\n",
659 				status);
660 	}
661 }
662 
663 /**
664  * gelic_net_stop - called upon ifconfig down
665  * @netdev: interface device structure
666  *
667  * always returns 0
668  */
669 int gelic_net_stop(struct net_device *netdev)
670 {
671 	struct gelic_card *card;
672 
673 	pr_debug("%s: start\n", __func__);
674 
675 	netif_stop_queue(netdev);
676 	netif_carrier_off(netdev);
677 
678 	card = netdev_card(netdev);
679 	gelic_card_down(card);
680 
681 	pr_debug("%s: done\n", __func__);
682 	return 0;
683 }
684 
685 /**
686  * gelic_card_get_next_tx_descr - returns the next available tx descriptor
687  * @card: device structure to get descriptor from
688  *
689  * returns the address of the next descriptor, or NULL if not available.
690  */
691 static struct gelic_descr *
692 gelic_card_get_next_tx_descr(struct gelic_card *card)
693 {
694 	if (!card->tx_chain.head)
695 		return NULL;
696 	/*  see if the next descriptor is free */
697 	if (card->tx_chain.tail != card->tx_chain.head->next &&
698 	    gelic_descr_get_status(card->tx_chain.head) ==
699 	    GELIC_DESCR_DMA_NOT_IN_USE)
700 		return card->tx_chain.head;
701 	else
702 		return NULL;
703 
704 }
705 
706 /**
707  * gelic_descr_set_tx_cmdstat - sets the tx descriptor command field
708  * @descr: descriptor structure to fill out
709  * @skb: packet to consider
710  *
711  * fills out the command and status field of the descriptor structure,
712  * depending on hardware checksum settings. This function assumes a wmb()
713  * has executed before.
714  */
715 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
716 				       struct sk_buff *skb)
717 {
718 	if (skb->ip_summed != CHECKSUM_PARTIAL)
719 		descr->hw_regs.dmac_cmd_status =
720 			cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
721 				    GELIC_DESCR_TX_DMA_FRAME_TAIL);
722 	else {
723 		/* is packet ip?
724 		 * if yes: tcp? udp? */
725 		if (skb->protocol == htons(ETH_P_IP)) {
726 			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
727 				descr->hw_regs.dmac_cmd_status =
728 				cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
729 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
730 
731 			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
732 				descr->hw_regs.dmac_cmd_status =
733 				cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
734 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
735 			else	/*
736 				 * the stack should checksum non-tcp and non-udp
737 				 * packets on his own: NETIF_F_IP_CSUM
738 				 */
739 				descr->hw_regs.dmac_cmd_status =
740 				cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
741 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
742 		}
743 	}
744 }
745 
746 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
747 						 unsigned short tag)
748 {
749 	struct vlan_ethhdr *veth;
750 	static unsigned int c;
751 
752 	if (skb_headroom(skb) < VLAN_HLEN) {
753 		struct sk_buff *sk_tmp = skb;
754 		pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
755 		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
756 		if (!skb)
757 			return NULL;
758 		dev_kfree_skb_any(sk_tmp);
759 	}
760 	veth = skb_push(skb, VLAN_HLEN);
761 
762 	/* Move the mac addresses to the top of buffer */
763 	memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
764 
765 	veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
766 	veth->h_vlan_TCI = htons(tag);
767 
768 	return skb;
769 }
770 
771 /**
772  * gelic_descr_prepare_tx - setup a descriptor for sending packets
773  * @card: card structure
774  * @descr: descriptor structure
775  * @skb: packet to use
776  *
777  * returns 0 on success, <0 on failure.
778  *
779  */
780 static int gelic_descr_prepare_tx(struct gelic_card *card,
781 				  struct gelic_descr *descr,
782 				  struct sk_buff *skb)
783 {
784 	dma_addr_t buf;
785 
786 	if (card->vlan_required) {
787 		struct sk_buff *skb_tmp;
788 		enum gelic_port_type type;
789 
790 		type = netdev_port(skb->dev)->type;
791 		skb_tmp = gelic_put_vlan_tag(skb,
792 					     card->vlan[type].tx);
793 		if (!skb_tmp)
794 			return -ENOMEM;
795 		skb = skb_tmp;
796 	}
797 
798 	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
799 
800 	if (dma_mapping_error(ctodev(card), buf)) {
801 		dev_err(ctodev(card),
802 			"dma map 2 failed (%p, %i). Dropping packet\n",
803 			skb->data, skb->len);
804 		return -ENOMEM;
805 	}
806 
807 	descr->hw_regs.payload.dev_addr = cpu_to_be32(buf);
808 	descr->hw_regs.payload.size = cpu_to_be32(skb->len);
809 	descr->skb = skb;
810 	descr->hw_regs.data_status = 0;
811 	descr->hw_regs.next_descr_addr = 0; /* terminate hw descr */
812 	gelic_descr_set_tx_cmdstat(descr, skb);
813 
814 	/* bump free descriptor pointer */
815 	card->tx_chain.head = descr->next;
816 	return 0;
817 }
818 
819 /**
820  * gelic_card_kick_txdma - enables TX DMA processing
821  * @card: card structure
822  * @descr: descriptor address to enable TX processing at
823  *
824  */
825 static int gelic_card_kick_txdma(struct gelic_card *card,
826 				 struct gelic_descr *descr)
827 {
828 	int status = 0;
829 
830 	if (card->tx_dma_progress)
831 		return 0;
832 
833 	if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
834 		card->tx_dma_progress = 1;
835 		status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
836 			descr->link.cpu_addr, 0);
837 		if (status) {
838 			card->tx_dma_progress = 0;
839 			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
840 				 "status=%d\n", status);
841 		}
842 	}
843 	return status;
844 }
845 
846 /**
847  * gelic_net_xmit - transmits a frame over the device
848  * @skb: packet to send out
849  * @netdev: interface device structure
850  *
851  * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
852  */
853 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
854 {
855 	struct gelic_card *card = netdev_card(netdev);
856 	struct gelic_descr *descr;
857 	int result;
858 	unsigned long flags;
859 
860 	spin_lock_irqsave(&card->tx_lock, flags);
861 
862 	gelic_card_release_tx_chain(card, 0);
863 
864 	descr = gelic_card_get_next_tx_descr(card);
865 	if (!descr) {
866 		/*
867 		 * no more descriptors free
868 		 */
869 		gelic_card_stop_queues(card);
870 		spin_unlock_irqrestore(&card->tx_lock, flags);
871 		return NETDEV_TX_BUSY;
872 	}
873 
874 	result = gelic_descr_prepare_tx(card, descr, skb);
875 	if (result) {
876 		/*
877 		 * DMA map failed.  As chances are that failure
878 		 * would continue, just release skb and return
879 		 */
880 		netdev->stats.tx_dropped++;
881 		dev_kfree_skb_any(skb);
882 		spin_unlock_irqrestore(&card->tx_lock, flags);
883 		return NETDEV_TX_OK;
884 	}
885 	/*
886 	 * link this prepared descriptor to previous one
887 	 * to achieve high performance
888 	 */
889 	descr->prev->hw_regs.next_descr_addr =
890 		cpu_to_be32(descr->link.cpu_addr);
891 	/*
892 	 * as hardware descriptor is modified in the above lines,
893 	 * ensure that the hardware sees it
894 	 */
895 	wmb();
896 	if (gelic_card_kick_txdma(card, descr)) {
897 		/*
898 		 * kick failed.
899 		 * release descriptor which was just prepared
900 		 */
901 		netdev->stats.tx_dropped++;
902 		/* don't trigger BUG_ON() in gelic_descr_release_tx */
903 		descr->hw_regs.data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
904 		gelic_descr_release_tx(card, descr);
905 		/* reset head */
906 		card->tx_chain.head = descr;
907 		/* reset hw termination */
908 		descr->prev->hw_regs.next_descr_addr = 0;
909 		dev_info(ctodev(card), "%s: kick failure\n", __func__);
910 	}
911 
912 	spin_unlock_irqrestore(&card->tx_lock, flags);
913 	return NETDEV_TX_OK;
914 }
915 
916 /**
917  * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
918  * @descr: descriptor to process
919  * @card: card structure
920  * @netdev: net_device structure to be passed packet
921  *
922  * iommu-unmaps the skb, fills out skb structure and passes the data to the
923  * stack. The descriptor state is not changed.
924  */
925 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
926 				  struct gelic_card *card,
927 				  struct net_device *netdev)
928 
929 {
930 	struct sk_buff *skb = descr->skb;
931 	u32 data_status, data_error;
932 
933 	data_status = be32_to_cpu(descr->hw_regs.data_status);
934 	data_error = be32_to_cpu(descr->hw_regs.data_error);
935 	/* unmap skb buffer */
936 	dma_unmap_single(ctodev(card),
937 		be32_to_cpu(descr->hw_regs.payload.dev_addr),
938 		be32_to_cpu(descr->hw_regs.payload.size), DMA_FROM_DEVICE);
939 
940 	skb_put(skb, be32_to_cpu(descr->hw_regs.valid_size)?
941 		be32_to_cpu(descr->hw_regs.valid_size) :
942 		be32_to_cpu(descr->hw_regs.result_size));
943 	if (!descr->hw_regs.valid_size)
944 		dev_info(ctodev(card), "buffer full %x %x %x\n",
945 			 be32_to_cpu(descr->hw_regs.result_size),
946 			 be32_to_cpu(descr->hw_regs.payload.size),
947 			 be32_to_cpu(descr->hw_regs.dmac_cmd_status));
948 
949 	descr->skb = NULL;
950 	/*
951 	 * the card put 2 bytes vlan tag in front
952 	 * of the ethernet frame
953 	 */
954 	skb_pull(skb, 2);
955 	skb->protocol = eth_type_trans(skb, netdev);
956 
957 	/* checksum offload */
958 	if (netdev->features & NETIF_F_RXCSUM) {
959 		if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
960 		    (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
961 			skb->ip_summed = CHECKSUM_UNNECESSARY;
962 		else
963 			skb_checksum_none_assert(skb);
964 	} else
965 		skb_checksum_none_assert(skb);
966 
967 	/* update netdevice statistics */
968 	netdev->stats.rx_packets++;
969 	netdev->stats.rx_bytes += skb->len;
970 
971 	/* pass skb up to stack */
972 	napi_gro_receive(&card->napi, skb);
973 }
974 
975 /**
976  * gelic_card_decode_one_descr - processes an rx descriptor
977  * @card: card structure
978  *
979  * returns 1 if a packet has been sent to the stack, -ENOMEM on skb alloc
980  * failure, otherwise 0
981  *
982  * processes an rx descriptor by iommu-unmapping the data buffer and passing
983  * the packet up to the stack
984  */
985 static int gelic_card_decode_one_descr(struct gelic_card *card)
986 {
987 	enum gelic_descr_dma_status status;
988 	struct gelic_descr_chain *chain = &card->rx_chain;
989 	struct gelic_descr *descr = chain->head;
990 	struct net_device *netdev = NULL;
991 	int dmac_chain_ended = 0;
992 	int prepare_rx_ret;
993 
994 	status = gelic_descr_get_status(descr);
995 
996 	if (status == GELIC_DESCR_DMA_CARDOWNED)
997 		return 0;
998 
999 	if (status == GELIC_DESCR_DMA_NOT_IN_USE || !descr->skb) {
1000 		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
1001 		dmac_chain_ended = 1;
1002 		goto refill;
1003 	}
1004 
1005 	/* netdevice select */
1006 	if (card->vlan_required) {
1007 		unsigned int i;
1008 		u16 vid;
1009 		vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
1010 		for (i = 0; i < GELIC_PORT_MAX; i++) {
1011 			if (card->vlan[i].rx == vid) {
1012 				netdev = card->netdev[i];
1013 				break;
1014 			}
1015 		}
1016 		if (GELIC_PORT_MAX <= i) {
1017 			pr_info("%s: unknown packet vid=%x\n", __func__, vid);
1018 			goto refill;
1019 		}
1020 	} else
1021 		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1022 
1023 	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1024 	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1025 	    (status == GELIC_DESCR_DMA_FORCE_END)) {
1026 		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1027 			 status);
1028 		netdev->stats.rx_dropped++;
1029 		goto refill;
1030 	}
1031 
1032 	if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1033 		/*
1034 		 * Buffer full would occur if and only if
1035 		 * the frame length was longer than the size of this
1036 		 * descriptor's buffer.  If the frame length was equal
1037 		 * to or shorter than buffer'size, FRAME_END condition
1038 		 * would occur.
1039 		 * Anyway this frame was longer than the MTU,
1040 		 * just drop it.
1041 		 */
1042 		dev_info(ctodev(card), "overlength frame\n");
1043 		goto refill;
1044 	}
1045 	/*
1046 	 * descriptors any other than FRAME_END here should
1047 	 * be treated as error.
1048 	 */
1049 	if (status != GELIC_DESCR_DMA_FRAME_END) {
1050 		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1051 			status);
1052 		goto refill;
1053 	}
1054 
1055 	/* ok, we've got a packet in descr */
1056 	gelic_net_pass_skb_up(descr, card, netdev);
1057 refill:
1058 
1059 	/* is the current descriptor terminated with next_descr == NULL? */
1060 	if (!dmac_chain_ended)
1061 		dmac_chain_ended =
1062 			be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
1063 			GELIC_DESCR_RX_DMA_CHAIN_END;
1064 	/*
1065 	 * So that always DMAC can see the end
1066 	 * of the descriptor chain to avoid
1067 	 * from unwanted DMAC overrun.
1068 	 */
1069 	descr->hw_regs.next_descr_addr = 0;
1070 
1071 	/* change the descriptor state: */
1072 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1073 
1074 	/*
1075 	 * this call can fail, propagate the error
1076 	 */
1077 	prepare_rx_ret = gelic_descr_prepare_rx(card, descr, true);
1078 	if (prepare_rx_ret)
1079 		return prepare_rx_ret;
1080 
1081 	chain->tail = descr;
1082 	chain->head = descr->next;
1083 
1084 	/*
1085 	 * Set this descriptor the end of the chain.
1086 	 */
1087 	descr->prev->hw_regs.next_descr_addr =
1088 		cpu_to_be32(descr->link.cpu_addr);
1089 
1090 	/*
1091 	 * If dmac chain was met, DMAC stopped.
1092 	 * thus re-enable it
1093 	 */
1094 
1095 	if (dmac_chain_ended)
1096 		gelic_card_enable_rxdmac(card);
1097 
1098 	return 1;
1099 }
1100 
1101 static void gelic_rx_oom_timer(struct timer_list *t)
1102 {
1103 	struct gelic_card *card = timer_container_of(card, t, rx_oom_timer);
1104 
1105 	napi_schedule(&card->napi);
1106 }
1107 
1108 /**
1109  * gelic_net_poll - NAPI poll function called by the stack to return packets
1110  * @napi: napi structure
1111  * @budget: number of packets we can pass to the stack at most
1112  *
1113  * returns the number of the processed packets
1114  *
1115  */
1116 static int gelic_net_poll(struct napi_struct *napi, int budget)
1117 {
1118 	struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1119 	int packets_done = 0;
1120 	int work_result = 0;
1121 
1122 	while (packets_done < budget) {
1123 		work_result = gelic_card_decode_one_descr(card);
1124 		if (work_result != 1)
1125 			break;
1126 
1127 		packets_done++;
1128 	}
1129 
1130 	if (work_result == -ENOMEM) {
1131 		napi_complete_done(napi, packets_done);
1132 		mod_timer(&card->rx_oom_timer, jiffies + 1);
1133 		return packets_done;
1134 	}
1135 
1136 	if (packets_done < budget) {
1137 		napi_complete_done(napi, packets_done);
1138 		gelic_card_rx_irq_on(card);
1139 	}
1140 	return packets_done;
1141 }
1142 
1143 /*
1144  * gelic_card_interrupt - event handler for gelic_net
1145  */
1146 static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1147 {
1148 	unsigned long flags;
1149 	struct gelic_card *card = ptr;
1150 	u64 status;
1151 
1152 	status = card->irq_status;
1153 
1154 	if (!status)
1155 		return IRQ_NONE;
1156 
1157 	status &= card->irq_mask;
1158 
1159 	if (status & GELIC_CARD_RXINT) {
1160 		gelic_card_rx_irq_off(card);
1161 		napi_schedule(&card->napi);
1162 	}
1163 
1164 	if (status & GELIC_CARD_TXINT) {
1165 		spin_lock_irqsave(&card->tx_lock, flags);
1166 		card->tx_dma_progress = 0;
1167 		gelic_card_release_tx_chain(card, 0);
1168 		/* kick outstanding tx descriptor if any */
1169 		gelic_card_kick_txdma(card, card->tx_chain.tail);
1170 		spin_unlock_irqrestore(&card->tx_lock, flags);
1171 	}
1172 
1173 	/* ether port status changed */
1174 	if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1175 		gelic_card_get_ether_port_status(card, 1);
1176 
1177 #ifdef CONFIG_GELIC_WIRELESS
1178 	if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1179 		      GELIC_CARD_WLAN_COMMAND_COMPLETED))
1180 		gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1181 #endif
1182 
1183 	return IRQ_HANDLED;
1184 }
1185 
1186 #ifdef CONFIG_NET_POLL_CONTROLLER
1187 /**
1188  * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1189  * @netdev: interface device structure
1190  *
1191  * see Documentation/networking/netconsole.rst
1192  */
1193 void gelic_net_poll_controller(struct net_device *netdev)
1194 {
1195 	struct gelic_card *card = netdev_card(netdev);
1196 
1197 	gelic_card_set_irq_mask(card, 0);
1198 	gelic_card_interrupt(netdev->irq, netdev);
1199 	gelic_card_set_irq_mask(card, card->irq_mask);
1200 }
1201 #endif /* CONFIG_NET_POLL_CONTROLLER */
1202 
1203 /**
1204  * gelic_net_open - called upon ifconfig up
1205  * @netdev: interface device structure
1206  *
1207  * returns 0 on success, <0 on failure
1208  *
1209  * gelic_net_open allocates all the descriptors and memory needed for
1210  * operation, sets up multicast list and enables interrupts
1211  */
1212 int gelic_net_open(struct net_device *netdev)
1213 {
1214 	struct gelic_card *card = netdev_card(netdev);
1215 
1216 	dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1217 
1218 	gelic_card_up(card);
1219 
1220 	netif_start_queue(netdev);
1221 	gelic_card_get_ether_port_status(card, 1);
1222 
1223 	dev_dbg(ctodev(card), " <- %s\n", __func__);
1224 	return 0;
1225 }
1226 
1227 void gelic_net_get_drvinfo(struct net_device *netdev,
1228 			   struct ethtool_drvinfo *info)
1229 {
1230 	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
1231 	strscpy(info->version, DRV_VERSION, sizeof(info->version));
1232 }
1233 
1234 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1235 					  struct ethtool_link_ksettings *cmd)
1236 {
1237 	struct gelic_card *card = netdev_card(netdev);
1238 	u32 supported, advertising;
1239 
1240 	gelic_card_get_ether_port_status(card, 0);
1241 
1242 	if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1243 		cmd->base.duplex = DUPLEX_FULL;
1244 	else
1245 		cmd->base.duplex = DUPLEX_HALF;
1246 
1247 	switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1248 	case GELIC_LV1_ETHER_SPEED_10:
1249 		cmd->base.speed = SPEED_10;
1250 		break;
1251 	case GELIC_LV1_ETHER_SPEED_100:
1252 		cmd->base.speed = SPEED_100;
1253 		break;
1254 	case GELIC_LV1_ETHER_SPEED_1000:
1255 		cmd->base.speed = SPEED_1000;
1256 		break;
1257 	default:
1258 		pr_info("%s: speed unknown\n", __func__);
1259 		cmd->base.speed = SPEED_10;
1260 		break;
1261 	}
1262 
1263 	supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1264 			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1265 			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1266 			SUPPORTED_1000baseT_Full;
1267 	advertising = supported;
1268 	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1269 		cmd->base.autoneg = AUTONEG_ENABLE;
1270 	} else {
1271 		cmd->base.autoneg = AUTONEG_DISABLE;
1272 		advertising &= ~ADVERTISED_Autoneg;
1273 	}
1274 	cmd->base.port = PORT_TP;
1275 
1276 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1277 						supported);
1278 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1279 						advertising);
1280 
1281 	return 0;
1282 }
1283 
1284 static int
1285 gelic_ether_set_link_ksettings(struct net_device *netdev,
1286 			       const struct ethtool_link_ksettings *cmd)
1287 {
1288 	struct gelic_card *card = netdev_card(netdev);
1289 	u64 mode;
1290 	int ret;
1291 
1292 	if (cmd->base.autoneg == AUTONEG_ENABLE) {
1293 		mode = GELIC_LV1_ETHER_AUTO_NEG;
1294 	} else {
1295 		switch (cmd->base.speed) {
1296 		case SPEED_10:
1297 			mode = GELIC_LV1_ETHER_SPEED_10;
1298 			break;
1299 		case SPEED_100:
1300 			mode = GELIC_LV1_ETHER_SPEED_100;
1301 			break;
1302 		case SPEED_1000:
1303 			mode = GELIC_LV1_ETHER_SPEED_1000;
1304 			break;
1305 		default:
1306 			return -EINVAL;
1307 		}
1308 		if (cmd->base.duplex == DUPLEX_FULL) {
1309 			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1310 		} else if (cmd->base.speed == SPEED_1000) {
1311 			pr_info("1000 half duplex is not supported.\n");
1312 			return -EINVAL;
1313 		}
1314 	}
1315 
1316 	ret = gelic_card_set_link_mode(card, mode);
1317 
1318 	if (ret)
1319 		return ret;
1320 
1321 	return 0;
1322 }
1323 
1324 static void gelic_net_get_wol(struct net_device *netdev,
1325 			      struct ethtool_wolinfo *wol)
1326 {
1327 	if (0 <= ps3_compare_firmware_version(2, 2, 0))
1328 		wol->supported = WAKE_MAGIC;
1329 	else
1330 		wol->supported = 0;
1331 
1332 	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1333 	memset(&wol->sopass, 0, sizeof(wol->sopass));
1334 }
1335 static int gelic_net_set_wol(struct net_device *netdev,
1336 			     struct ethtool_wolinfo *wol)
1337 {
1338 	int status;
1339 	struct gelic_card *card;
1340 	u64 v1, v2;
1341 
1342 	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1343 	    !capable(CAP_NET_ADMIN))
1344 		return -EPERM;
1345 
1346 	if (wol->wolopts & ~WAKE_MAGIC)
1347 		return -EINVAL;
1348 
1349 	card = netdev_card(netdev);
1350 	if (wol->wolopts & WAKE_MAGIC) {
1351 		status = lv1_net_control(bus_id(card), dev_id(card),
1352 					 GELIC_LV1_SET_WOL,
1353 					 GELIC_LV1_WOL_MAGIC_PACKET,
1354 					 0, GELIC_LV1_WOL_MP_ENABLE,
1355 					 &v1, &v2);
1356 		if (status) {
1357 			pr_info("%s: enabling WOL failed %d\n", __func__,
1358 				status);
1359 			status = -EIO;
1360 			goto done;
1361 		}
1362 		status = lv1_net_control(bus_id(card), dev_id(card),
1363 					 GELIC_LV1_SET_WOL,
1364 					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
1365 					 0, GELIC_LV1_WOL_MATCH_ALL,
1366 					 &v1, &v2);
1367 		if (!status)
1368 			ps3_sys_manager_set_wol(1);
1369 		else {
1370 			pr_info("%s: enabling WOL filter failed %d\n",
1371 				__func__, status);
1372 			status = -EIO;
1373 		}
1374 	} else {
1375 		status = lv1_net_control(bus_id(card), dev_id(card),
1376 					 GELIC_LV1_SET_WOL,
1377 					 GELIC_LV1_WOL_MAGIC_PACKET,
1378 					 0, GELIC_LV1_WOL_MP_DISABLE,
1379 					 &v1, &v2);
1380 		if (status) {
1381 			pr_info("%s: disabling WOL failed %d\n", __func__,
1382 				status);
1383 			status = -EIO;
1384 			goto done;
1385 		}
1386 		status = lv1_net_control(bus_id(card), dev_id(card),
1387 					 GELIC_LV1_SET_WOL,
1388 					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1389 					 0, GELIC_LV1_WOL_MATCH_ALL,
1390 					 &v1, &v2);
1391 		if (!status)
1392 			ps3_sys_manager_set_wol(0);
1393 		else {
1394 			pr_info("%s: removing WOL filter failed %d\n",
1395 				__func__, status);
1396 			status = -EIO;
1397 		}
1398 	}
1399 done:
1400 	return status;
1401 }
1402 
1403 static const struct ethtool_ops gelic_ether_ethtool_ops = {
1404 	.get_drvinfo	= gelic_net_get_drvinfo,
1405 	.get_link	= ethtool_op_get_link,
1406 	.get_wol	= gelic_net_get_wol,
1407 	.set_wol	= gelic_net_set_wol,
1408 	.get_link_ksettings = gelic_ether_get_link_ksettings,
1409 	.set_link_ksettings = gelic_ether_set_link_ksettings,
1410 };
1411 
1412 /**
1413  * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1414  * function (to be called not under interrupt status)
1415  * @work: work is context of tx timout task
1416  *
1417  * called as task when tx hangs, resets interface (if interface is up)
1418  */
1419 static void gelic_net_tx_timeout_task(struct work_struct *work)
1420 {
1421 	struct gelic_card *card =
1422 		container_of(work, struct gelic_card, tx_timeout_task);
1423 	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1424 
1425 	dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1426 
1427 	if (!(netdev->flags & IFF_UP))
1428 		goto out;
1429 
1430 	netif_device_detach(netdev);
1431 	gelic_net_stop(netdev);
1432 
1433 	gelic_net_open(netdev);
1434 	netif_device_attach(netdev);
1435 
1436 out:
1437 	atomic_dec(&card->tx_timeout_task_counter);
1438 }
1439 
1440 /**
1441  * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1442  * @netdev: interface device structure
1443  * @txqueue: unused
1444  *
1445  * called, if tx hangs. Schedules a task that resets the interface
1446  */
1447 void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue)
1448 {
1449 	struct gelic_card *card;
1450 
1451 	card = netdev_card(netdev);
1452 	atomic_inc(&card->tx_timeout_task_counter);
1453 	if (netdev->flags & IFF_UP)
1454 		schedule_work(&card->tx_timeout_task);
1455 	else
1456 		atomic_dec(&card->tx_timeout_task_counter);
1457 }
1458 
1459 static const struct net_device_ops gelic_netdevice_ops = {
1460 	.ndo_open = gelic_net_open,
1461 	.ndo_stop = gelic_net_stop,
1462 	.ndo_start_xmit = gelic_net_xmit,
1463 	.ndo_set_rx_mode = gelic_net_set_multi,
1464 	.ndo_tx_timeout = gelic_net_tx_timeout,
1465 	.ndo_set_mac_address = eth_mac_addr,
1466 	.ndo_validate_addr = eth_validate_addr,
1467 #ifdef CONFIG_NET_POLL_CONTROLLER
1468 	.ndo_poll_controller = gelic_net_poll_controller,
1469 #endif
1470 };
1471 
1472 /**
1473  * gelic_ether_setup_netdev_ops - initialization of net_device operations
1474  * @netdev: net_device structure
1475  * @napi: napi structure
1476  *
1477  * fills out function pointers in the net_device structure
1478  */
1479 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1480 					 struct napi_struct *napi)
1481 {
1482 	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1483 	/* NAPI */
1484 	netif_napi_add(netdev, napi, gelic_net_poll);
1485 	netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1486 	netdev->netdev_ops = &gelic_netdevice_ops;
1487 }
1488 
1489 /**
1490  * gelic_net_setup_netdev - initialization of net_device
1491  * @netdev: net_device structure
1492  * @card: card structure
1493  *
1494  * Returns 0 on success or <0 on failure
1495  *
1496  * gelic_ether_setup_netdev initializes the net_device structure
1497  * and register it.
1498  **/
1499 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1500 {
1501 	int status;
1502 	u64 v1, v2;
1503 
1504 	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1505 
1506 	netdev->features = NETIF_F_IP_CSUM;
1507 	if (GELIC_CARD_RX_CSUM_DEFAULT)
1508 		netdev->features |= NETIF_F_RXCSUM;
1509 
1510 	status = lv1_net_control(bus_id(card), dev_id(card),
1511 				 GELIC_LV1_GET_MAC_ADDRESS,
1512 				 0, 0, 0, &v1, &v2);
1513 	v1 <<= 16;
1514 	if (status || !is_valid_ether_addr((u8 *)&v1)) {
1515 		dev_info(ctodev(card),
1516 			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1517 			 __func__, status);
1518 		return -EINVAL;
1519 	}
1520 	eth_hw_addr_set(netdev, (u8 *)&v1);
1521 
1522 	if (card->vlan_required) {
1523 		netdev->hard_header_len += VLAN_HLEN;
1524 		/*
1525 		 * As vlan is internally used,
1526 		 * we can not receive vlan packets
1527 		 */
1528 		netdev->features |= NETIF_F_VLAN_CHALLENGED;
1529 	}
1530 
1531 	/* MTU range: 64 - 1518 */
1532 	netdev->min_mtu = GELIC_NET_MIN_MTU;
1533 	netdev->max_mtu = GELIC_NET_MAX_MTU;
1534 
1535 	status = register_netdev(netdev);
1536 	if (status) {
1537 		dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1538 			__func__, netdev->name, status);
1539 		return status;
1540 	}
1541 	dev_info(ctodev(card), "%s: MAC addr %pM\n",
1542 		 netdev->name, netdev->dev_addr);
1543 
1544 	return 0;
1545 }
1546 
1547 #define GELIC_ALIGN (32)
1548 
1549 /**
1550  * gelic_alloc_card_net - allocates net_device and card structure
1551  * @netdev: interface device structure
1552  *
1553  * returns the card structure or NULL in case of errors
1554  *
1555  * the card and net_device structures are linked to each other
1556  */
1557 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1558 {
1559 	struct gelic_card *card;
1560 	struct gelic_port *port;
1561 	void *p;
1562 	size_t alloc_size;
1563 	/*
1564 	 * gelic requires dma descriptor is 32 bytes aligned and
1565 	 * the hypervisor requires irq_status is 8 bytes aligned.
1566 	 */
1567 	BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1568 	BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1569 	alloc_size =
1570 		sizeof(struct gelic_card) +
1571 		sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1572 		sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1573 		GELIC_ALIGN - 1;
1574 
1575 	p  = kzalloc(alloc_size, GFP_KERNEL);
1576 	if (!p)
1577 		return NULL;
1578 	card = PTR_ALIGN(p, GELIC_ALIGN);
1579 	card->unalign = p;
1580 
1581 	/*
1582 	 * alloc netdev
1583 	 */
1584 	*netdev = alloc_etherdev(sizeof(struct gelic_port));
1585 	if (!*netdev) {
1586 		kfree(card->unalign);
1587 		return NULL;
1588 	}
1589 	port = netdev_priv(*netdev);
1590 
1591 	/* gelic_port */
1592 	port->netdev = *netdev;
1593 	port->card = card;
1594 	port->type = GELIC_PORT_ETHERNET_0;
1595 
1596 	/* gelic_card */
1597 	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1598 
1599 	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1600 	init_waitqueue_head(&card->waitq);
1601 	atomic_set(&card->tx_timeout_task_counter, 0);
1602 	mutex_init(&card->updown_lock);
1603 	atomic_set(&card->users, 0);
1604 
1605 	timer_setup(&card->rx_oom_timer, gelic_rx_oom_timer, 0);
1606 
1607 	return card;
1608 }
1609 
1610 static void gelic_card_get_vlan_info(struct gelic_card *card)
1611 {
1612 	u64 v1, v2;
1613 	int status;
1614 	unsigned int i;
1615 	struct {
1616 		int tx;
1617 		int rx;
1618 	} vlan_id_ix[2] = {
1619 		[GELIC_PORT_ETHERNET_0] = {
1620 			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1621 			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1622 		},
1623 		[GELIC_PORT_WIRELESS] = {
1624 			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
1625 			.rx = GELIC_LV1_VLAN_RX_WIRELESS
1626 		}
1627 	};
1628 
1629 	for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1630 		/* tx tag */
1631 		status = lv1_net_control(bus_id(card), dev_id(card),
1632 					 GELIC_LV1_GET_VLAN_ID,
1633 					 vlan_id_ix[i].tx,
1634 					 0, 0, &v1, &v2);
1635 		if (status || !v1) {
1636 			if (status != LV1_NO_ENTRY)
1637 				dev_dbg(ctodev(card),
1638 					"get vlan id for tx(%d) failed(%d)\n",
1639 					vlan_id_ix[i].tx, status);
1640 			card->vlan[i].tx = 0;
1641 			card->vlan[i].rx = 0;
1642 			continue;
1643 		}
1644 		card->vlan[i].tx = (u16)v1;
1645 
1646 		/* rx tag */
1647 		status = lv1_net_control(bus_id(card), dev_id(card),
1648 					 GELIC_LV1_GET_VLAN_ID,
1649 					 vlan_id_ix[i].rx,
1650 					 0, 0, &v1, &v2);
1651 		if (status || !v1) {
1652 			if (status != LV1_NO_ENTRY)
1653 				dev_info(ctodev(card),
1654 					 "get vlan id for rx(%d) failed(%d)\n",
1655 					 vlan_id_ix[i].rx, status);
1656 			card->vlan[i].tx = 0;
1657 			card->vlan[i].rx = 0;
1658 			continue;
1659 		}
1660 		card->vlan[i].rx = (u16)v1;
1661 
1662 		dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1663 			i, card->vlan[i].tx, card->vlan[i].rx);
1664 	}
1665 
1666 	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1667 		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1668 		card->vlan_required = 1;
1669 	} else
1670 		card->vlan_required = 0;
1671 
1672 	/* check wirelss capable firmware */
1673 	if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1674 		card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1675 		card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1676 	}
1677 
1678 	dev_info(ctodev(card), "internal vlan %s\n",
1679 		 card->vlan_required? "enabled" : "disabled");
1680 }
1681 /*
1682  * ps3_gelic_driver_probe - add a device to the control of this driver
1683  */
1684 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1685 {
1686 	struct gelic_card *card;
1687 	struct net_device *netdev;
1688 	int result;
1689 
1690 	pr_debug("%s: called\n", __func__);
1691 
1692 	udbg_shutdown_ps3gelic();
1693 
1694 	result = ps3_open_hv_device(dev);
1695 
1696 	if (result) {
1697 		dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1698 			__func__);
1699 		goto fail_open;
1700 	}
1701 
1702 	result = ps3_dma_region_create(dev->d_region);
1703 
1704 	if (result) {
1705 		dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1706 			__func__, result);
1707 		BUG_ON("check region type");
1708 		goto fail_dma_region;
1709 	}
1710 
1711 	/* alloc card/netdevice */
1712 	card = gelic_alloc_card_net(&netdev);
1713 	if (!card) {
1714 		dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1715 			 __func__);
1716 		result = -ENOMEM;
1717 		goto fail_alloc_card;
1718 	}
1719 	ps3_system_bus_set_drvdata(dev, card);
1720 	card->dev = dev;
1721 
1722 	/* get internal vlan info */
1723 	gelic_card_get_vlan_info(card);
1724 
1725 	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1726 
1727 	/* setup interrupt */
1728 	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1729 							dev_id(card),
1730 		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1731 		0);
1732 
1733 	if (result) {
1734 		dev_dbg(&dev->core,
1735 			"%s:set_interrupt_status_indicator failed: %s\n",
1736 			__func__, ps3_result(result));
1737 		result = -EIO;
1738 		goto fail_status_indicator;
1739 	}
1740 
1741 	result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1742 		&card->irq);
1743 
1744 	if (result) {
1745 		dev_info(ctodev(card),
1746 			 "%s:gelic_net_open_device failed (%d)\n",
1747 			 __func__, result);
1748 		result = -EPERM;
1749 		goto fail_alloc_irq;
1750 	}
1751 	result = request_irq(card->irq, gelic_card_interrupt,
1752 			     0, netdev->name, card);
1753 
1754 	if (result) {
1755 		dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1756 			__func__, result);
1757 		goto fail_request_irq;
1758 	}
1759 
1760 	/* setup card structure */
1761 	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1762 		GELIC_CARD_PORT_STATUS_CHANGED;
1763 
1764 
1765 	result = gelic_card_init_chain(card, &card->tx_chain,
1766 				       card->descr, GELIC_NET_TX_DESCRIPTORS);
1767 	if (result)
1768 		goto fail_alloc_tx;
1769 	result = gelic_card_init_chain(card, &card->rx_chain,
1770 				       card->descr + GELIC_NET_TX_DESCRIPTORS,
1771 				       GELIC_NET_RX_DESCRIPTORS);
1772 	if (result)
1773 		goto fail_alloc_rx;
1774 
1775 	/* head of chain */
1776 	card->tx_top = card->tx_chain.head;
1777 	card->rx_top = card->rx_chain.head;
1778 	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1779 		card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1780 		GELIC_NET_RX_DESCRIPTORS);
1781 	/* allocate rx skbs */
1782 	result = gelic_card_alloc_rx_skbs(card);
1783 	if (result)
1784 		goto fail_alloc_skbs;
1785 
1786 	spin_lock_init(&card->tx_lock);
1787 	card->tx_dma_progress = 0;
1788 
1789 	/* setup net_device structure */
1790 	netdev->irq = card->irq;
1791 	SET_NETDEV_DEV(netdev, &card->dev->core);
1792 	gelic_ether_setup_netdev_ops(netdev, &card->napi);
1793 	result = gelic_net_setup_netdev(netdev, card);
1794 	if (result) {
1795 		dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1796 			__func__, result);
1797 		goto fail_setup_netdev;
1798 	}
1799 
1800 #ifdef CONFIG_GELIC_WIRELESS
1801 	result = gelic_wl_driver_probe(card);
1802 	if (result) {
1803 		dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1804 		goto fail_setup_netdev;
1805 	}
1806 #endif
1807 	pr_debug("%s: done\n", __func__);
1808 	return 0;
1809 
1810 fail_setup_netdev:
1811 fail_alloc_skbs:
1812 	gelic_card_free_chain(card, card->rx_chain.head);
1813 fail_alloc_rx:
1814 	gelic_card_free_chain(card, card->tx_chain.head);
1815 fail_alloc_tx:
1816 	free_irq(card->irq, card);
1817 	netdev->irq = 0;
1818 fail_request_irq:
1819 	ps3_sb_event_receive_port_destroy(dev, card->irq);
1820 fail_alloc_irq:
1821 	lv1_net_set_interrupt_status_indicator(bus_id(card),
1822 					       bus_id(card),
1823 					       0, 0);
1824 fail_status_indicator:
1825 	ps3_system_bus_set_drvdata(dev, NULL);
1826 	kfree(netdev_card(netdev)->unalign);
1827 	free_netdev(netdev);
1828 fail_alloc_card:
1829 	ps3_dma_region_free(dev->d_region);
1830 fail_dma_region:
1831 	ps3_close_hv_device(dev);
1832 fail_open:
1833 	return result;
1834 }
1835 
1836 /*
1837  * ps3_gelic_driver_remove - remove a device from the control of this driver
1838  */
1839 
1840 static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1841 {
1842 	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1843 	struct net_device *netdev0;
1844 	pr_debug("%s: called\n", __func__);
1845 
1846 	/* set auto-negotiation */
1847 	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1848 
1849 #ifdef CONFIG_GELIC_WIRELESS
1850 	gelic_wl_driver_remove(card);
1851 #endif
1852 	/* stop interrupt */
1853 	gelic_card_set_irq_mask(card, 0);
1854 
1855 	/* turn off DMA, force end */
1856 	gelic_card_disable_rxdmac(card);
1857 	gelic_card_disable_txdmac(card);
1858 
1859 	/* release chains */
1860 	gelic_card_release_tx_chain(card, 1);
1861 	gelic_card_release_rx_chain(card);
1862 
1863 	gelic_card_free_chain(card, card->tx_top);
1864 	gelic_card_free_chain(card, card->rx_top);
1865 
1866 	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1867 	/* disconnect event port */
1868 	free_irq(card->irq, card);
1869 	netdev0->irq = 0;
1870 	ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1871 
1872 	wait_event(card->waitq,
1873 		   atomic_read(&card->tx_timeout_task_counter) == 0);
1874 
1875 	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1876 					       0 , 0);
1877 
1878 	unregister_netdev(netdev0);
1879 	kfree(netdev_card(netdev0)->unalign);
1880 	free_netdev(netdev0);
1881 
1882 	ps3_system_bus_set_drvdata(dev, NULL);
1883 
1884 	ps3_dma_region_free(dev->d_region);
1885 
1886 	ps3_close_hv_device(dev);
1887 
1888 	pr_debug("%s: done\n", __func__);
1889 }
1890 
1891 static struct ps3_system_bus_driver ps3_gelic_driver = {
1892 	.match_id = PS3_MATCH_ID_GELIC,
1893 	.probe = ps3_gelic_driver_probe,
1894 	.remove = ps3_gelic_driver_remove,
1895 	.shutdown = ps3_gelic_driver_remove,
1896 	.core.name = "ps3_gelic_driver",
1897 	.core.owner = THIS_MODULE,
1898 };
1899 
1900 static int __init ps3_gelic_driver_init (void)
1901 {
1902 	return firmware_has_feature(FW_FEATURE_PS3_LV1)
1903 		? ps3_system_bus_driver_register(&ps3_gelic_driver)
1904 		: -ENODEV;
1905 }
1906 
1907 static void __exit ps3_gelic_driver_exit (void)
1908 {
1909 	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1910 }
1911 
1912 module_init(ps3_gelic_driver_init);
1913 module_exit(ps3_gelic_driver_exit);
1914 
1915 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1916 
1917