xref: /freebsd/sys/dev/qat/qat_api/include/dc/cpa_dc.h (revision 2542189532b3025577fa4e782904494f3587008b)

/* SPDX-License-Identifier: BSD-3-Clause */
/* Copyright(c) 2007-2025 Intel Corporation */

/*
 *****************************************************************************
 * Doxygen group definitions
 ****************************************************************************/

/**
 *****************************************************************************
 * @file cpa_dc.h
 *
 * @defgroup cpaDc Data Compression API
 *
 * @ingroup cpa
 *
 * @description
 *      These functions specify the API for Data Compression operations.
 *
 *      The Data Compression API has the following:
 *      1) Session based API functions
 *         These functions require a session to be created before performing any
 *         DC operations. Subsequent DC API functions make use of the returned
 *         Session Handle within their structures or function prototypes.
 *      2) Session-less or No-Session (Ns) based API functions.
 *         These functions do not require a session to be initialized before
 *         performing DC operations. They are "one-shot" API function calls
 *         that submit DC requests directly using the supplied parameters.
 *
 * @remarks
 *
 *
 *****************************************************************************/

#ifndef CPA_DC_H
#define CPA_DC_H

#ifdef __cplusplus
extern"C" {
#endif


#ifndef CPA_H
#include "cpa.h"
#endif

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      CPA Dc Major Version Number
 * @description
 *      The CPA_DC API major version number. This number will be incremented
 *      when significant churn to the API has occurred. The combination of the
 *      major and minor number definitions represent the complete version number
 *      for this interface.
 *
 *****************************************************************************/
#define CPA_DC_API_VERSION_NUM_MAJOR (3)

/**
 *****************************************************************************
 * @ingroup cpaDc
 *       CPA DC Minor Version Number
 * @description
 *      The CPA_DC API minor version number. This number will be incremented
 *      when minor changes to the API has occurred. The combination of the major
 *      and minor number definitions represent the complete version number for
 *      this interface.
 *
 *****************************************************************************/
#define CPA_DC_API_VERSION_NUM_MINOR (2)

/**
 *****************************************************************************
 * @file cpa_dc.h
 * @ingroup cpaDc
 *       CPA DC API version at least
 * @description
 *      The minimal supported CPA_DC API version. Allow to check if the API
 *      version is equal or above some version to avoid compilation issues
 *      with an older API version.
 *
 *****************************************************************************/
#define CPA_DC_API_VERSION_AT_LEAST(major, minor)                              \
    (CPA_DC_API_VERSION_NUM_MAJOR > major ||                                   \
     (CPA_DC_API_VERSION_NUM_MAJOR == major &&                                 \
      CPA_DC_API_VERSION_NUM_MINOR >= minor))

/**
 *****************************************************************************
 * @file cpa_dc.h
 * @ingroup cpaDc
 *       CPA DC API version less than
 * @description
 *      The maximum supported CPA_DC API version. Allow to check if the API
 *      version is below some version to avoid compilation issues with a newer
 *      API version.
 *
 *****************************************************************************/
#define CPA_DC_API_VERSION_LESS_THAN(major, minor)                             \
    (CPA_DC_API_VERSION_NUM_MAJOR < major ||                                   \
     (CPA_DC_API_VERSION_NUM_MAJOR == major &&                                 \
      CPA_DC_API_VERSION_NUM_MINOR < minor))


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Size of bitmap needed for compression chaining capabilities.
 *
 * @description
 *      Defines the number of bits in the bitmap to represent supported
 *      chaining capabilities @ref dcChainCapInfo. Should be set to
 *      at least one greater than the largest value in the enumerated type
 *      @ref CpaDcChainOperations, so that the value of the enum constant
 *      can also be used as the bit position in the bitmap.
 *
 *      A larger value was chosen to allow for extensibility without the need
 *      to change the size of the bitmap (to ease backwards compatibility in
 *      future versions of the API).
 *
 *****************************************************************************/
#define CPA_DC_CHAIN_CAP_BITMAP_SIZE (32)

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression API session handle type
 *
 * @description
 *      Handle used to uniquely identify a Compression API session handle. This
 *      handle is established upon registration with the API using
 *      cpaDcInitSession().
 *
 *
 *
 *****************************************************************************/
typedef void * CpaDcSessionHandle;


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported flush flags
 *
 * @description
 *      This enumerated list identifies the types of flush that can be
 *      specified for stateful and stateless cpaDcCompressData and
 *      cpaDcDecompressData functions.
 *
 *****************************************************************************/
typedef enum _CpaDcFlush
{
    CPA_DC_FLUSH_NONE = 0,
    /**< No flush request. */
    CPA_DC_FLUSH_FINAL,
    /**< Indicates that the input buffer contains all of the data for
    the compression session allowing any buffered data to be released.
    For Deflate, BFINAL is set in the compression header.*/
    CPA_DC_FLUSH_SYNC,
    /**< Used for stateful deflate compression to indicate that all pending
    output is flushed, byte aligned, to the output buffer. The session state
    is not reset.*/
    CPA_DC_FLUSH_FULL
    /**< Used for deflate compression to indicate that all pending output is
    flushed to the output buffer and the session state is reset.*/
} CpaDcFlush;
/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported Huffman Tree types
 *
 * @description
 *      This enumeration lists support for Huffman Tree types.
 *      Selecting Static Huffman trees generates compressed blocks with an RFC
 *      1951 header specifying "compressed with fixed Huffman trees".
 *
 *      Selecting Full Dynamic Huffman trees generates compressed blocks with
 *      an RFC 1951 header specifying "compressed with dynamic Huffman codes".
 *      The headers are calculated on the data being compressed, requiring two
 *      passes.
 *
 *      Selecting Precompiled Huffman Trees generates blocks with RFC 1951
 *      dynamic headers.  The headers are pre-calculated and are specified by
 *      the file type.
 *
 *****************************************************************************/
typedef enum _CpaDcHuffType
{
    CPA_DC_HT_STATIC = 0,
    /**< Static Huffman Trees */
    CPA_DC_HT_PRECOMP,
    /**< Precompiled Huffman Trees  */
    CPA_DC_HT_FULL_DYNAMIC
    /**< Full Dynamic Huffman Trees */
} CpaDcHuffType;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported compression types
 *
 * @description
 *      This enumeration lists the supported data compression algorithms.
 *      In combination with CpaDcChecksum it is used to decide on the file
 *      header and footer format.
 *
 *****************************************************************************/
typedef enum _CpaDcCompType
{
    CPA_DC_DEFLATE = 3,
    /**< Deflate Compression */
    CPA_DC_LZ4,
    /**< LZ4 Compression */
    CPA_DC_LZ4S
    /**< LZ4S Compression */
} CpaDcCompType;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Support for defined algorithm window sizes
 *
 * @description
 *      This enumerated list defines the valid window sizes that can be
 *      used with the supported algorithms
 *****************************************************************************/
typedef enum _CpaDcCompWindowSize
{
    CPA_DC_WINSIZE_4K = 0,
    /**< Window size of 4KB */
    CPA_DC_WINSIZE_8K,
    /**< Window size of 8KB */
    CPA_DC_WINSIZE_16K,
    /**< Window size of 16KB */
    CPA_DC_WINSIZE_32K
    /**< Window size of 32KB */
} CpaDcCompWindowSize;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Min match size in bytes
 * @description
 *      This is the min match size that will be used for the search algorithm.
 *      It is only configurable for LZ4S.
 *****************************************************************************/
typedef enum _CpaDcCompMinMatch
{
    CPA_DC_MIN_3_BYTE_MATCH = 0,
    /**< Min Match of 3 bytes */
    CPA_DC_MIN_4_BYTE_MATCH
    /**< Min Match of 4 bytes */
} CpaDcCompMinMatch;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Maximum LZ4 output block size
 * @description
 *      Maximum LZ4 output block size
 *****************************************************************************/
typedef enum _CpaDcCompLZ4BlockMaxSize
{
    CPA_DC_LZ4_MAX_BLOCK_SIZE_64K = 0,
    /**< Maximum block size 64K */
    CPA_DC_LZ4_MAX_BLOCK_SIZE_256K,
    /**< Maximum block size 256K */
    CPA_DC_LZ4_MAX_BLOCK_SIZE_1M,
    /**< Maximum block size 1M */
    CPA_DC_LZ4_MAX_BLOCK_SIZE_4M,
    /**< Maximum block size 4M */
} CpaDcCompLZ4BlockMaxSize;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported checksum algorithms
 *
 * @description
 *      This enumeration lists the supported checksum algorithms
 *      Used to decide on file header and footer specifics.
 *
 *****************************************************************************/
typedef enum _CpaDcChecksum
{
    CPA_DC_NONE = 0,
    /**< No checksum required */
    CPA_DC_CRC32,
    /**< Application requires a CRC32 checksum */
    CPA_DC_ADLER32,
    /**< Application requires Adler-32 checksum */
    CPA_DC_CRC32_ADLER32,
    /**< Application requires both CRC32 and Adler-32 checksums */
    CPA_DC_XXHASH32,
    /**< Application requires xxHash-32 checksum */
} CpaDcChecksum;


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported session directions
 *
 * @description
 *      This enumerated list identifies the direction of a session.
 *      A session can be compress, decompress or both.
 *
 *****************************************************************************/
typedef enum _CpaDcSessionDir
{
    CPA_DC_DIR_COMPRESS = 0,
    /**< Session will be used for compression */
    CPA_DC_DIR_DECOMPRESS,
    /**< Session will be used for decompression */
    CPA_DC_DIR_COMBINED
    /**< Session will be used for both compression and decompression */
} CpaDcSessionDir;

typedef CpaDcSessionDir CpaDcDir;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported session state settings
 *
 * @description
 *      This enumerated list identifies the stateful setting of a session.
 *      A session can be either stateful or stateless.
 *
 *      Stateful sessions are limited to have only one in-flight message per
 *      session. This means a compress or decompress request must be complete
 *      before a new request can be started. This applies equally to sessions
 *      that are uni-directional in nature and sessions that are combined
 *      compress and decompress. Completion occurs when the synchronous function
 *      returns, or when the asynchronous callback function has completed.
 *
 *****************************************************************************/
typedef enum _CpaDcSessionState
{
    CPA_DC_STATEFUL = 0,
    /**< Session will be stateful, implying that state may need to be
        saved in some situations */
    CPA_DC_STATELESS
    /**< Session will be stateless, implying no state will be stored*/
} CpaDcSessionState;

typedef CpaDcSessionState CpaDcState;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported compression levels
 *
 * @description
 *      This enumerated lists the supported compressed levels.
 *      Lower values will result in less compressibility in less time.
 *
 *
 *****************************************************************************/
typedef enum _CpaDcCompLvl
{
    CPA_DC_L1 = 1,
    /**< Compression level 1 */
    CPA_DC_L2,
    /**< Compression level 2 */
    CPA_DC_L3,
    /**< Compression level 3 */
    CPA_DC_L4,
    /**< Compression level 4 */
    CPA_DC_L5,
    /**< Compression level 5 */
    CPA_DC_L6,
    /**< Compression level 6 */
    CPA_DC_L7,
    /**< Compression level 7 */
    CPA_DC_L8,
    /**< Compression level 8 */
    CPA_DC_L9,
    /**< Compression level 9 */
    CPA_DC_L10,
    /**< Compression level 10 */
    CPA_DC_L11,
    /**< Compression level 11 */
    CPA_DC_L12
    /**< Compression level 12 */
} CpaDcCompLvl;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported additional details from accelerator
 *
 * @description
 *      This enumeration lists the supported additional details from the
 *      accelerator.  These may be useful in determining the best way to
 *      recover from a failure.
 *
 *
 *****************************************************************************/
typedef enum _CpaDcReqStatus
{
    CPA_DC_OK = 0,
    /**< No error detected by compression slice */
    CPA_DC_INVALID_BLOCK_TYPE = -1,
    /**< Invalid block type (type == 3) */
    CPA_DC_BAD_STORED_BLOCK_LEN = -2,
    /**< Stored block length did not match one's complement */
    CPA_DC_TOO_MANY_CODES  = -3,
    /**< Too many length or distance codes */
    CPA_DC_INCOMPLETE_CODE_LENS = -4,
    /**< Code length codes incomplete */
    CPA_DC_REPEATED_LENS = -5,
    /**< Repeated lengths with no first length */
    CPA_DC_MORE_REPEAT = -6,
    /**< Repeat more than specified lengths */
    CPA_DC_BAD_LITLEN_CODES = -7,
    /**< Invalid literal/length code lengths */
    CPA_DC_BAD_DIST_CODES = -8,
    /**< Invalid distance code lengths */
    CPA_DC_INVALID_CODE = -9,
    /**< Invalid literal/length or distance code in fixed or dynamic block */
    CPA_DC_INVALID_DIST = -10,
    /**< Distance is too far back in fixed or dynamic block */
    CPA_DC_OVERFLOW = -11,
    /**< Overflow detected.  This is an indication that output buffer has overflowed.
     * For stateful sessions, this is a warning (the input can be adjusted and
     * resubmitted).
     * For stateless sessions this is an error condition */
    CPA_DC_SOFTERR = -12,
    /**< Other non-fatal detected */
    CPA_DC_FATALERR = -13,
    /**< Fatal error detected */
    CPA_DC_MAX_RESUBITERR = -14,
    /**< On an error being detected, the firmware attempted to correct and resubmitted the
     * request, however, the maximum resubmit value was exceeded */
    CPA_DC_INCOMPLETE_FILE_ERR = -15,
    /**< The input file is incomplete.  Note this is an indication that the request was
     * submitted with a CPA_DC_FLUSH_FINAL, however, a BFINAL bit was not found in the
     * request */
    CPA_DC_WDOG_TIMER_ERR = -16,
   /**< The request was not completed as a watchdog timer hardware event occurred */
    CPA_DC_EP_HARDWARE_ERR = -17,
    /**< Request was not completed as an end point hardware error occurred (for
     * example, a parity error) */
    CPA_DC_VERIFY_ERROR = -18,
    /**< Error detected during "compress and verify" operation */
    CPA_DC_EMPTY_DYM_BLK = -19,
    /**< Decompression request contained an empty dynamic stored block
     * (not supported) */
    CPA_DC_CRC_INTEG_ERR = -20,
    /**< A data integrity CRC error was detected */
    CPA_DC_REGION_OUT_OF_BOUNDS = -21,
    /**< Error returned when decompression ends before the specified partial
     * decompression region was produced */
    CPA_DC_LZ4_MAX_BLOCK_SIZE_EXCEEDED = -93,
    /**< LZ4 max block size exceeded */
    CPA_DC_LZ4_BLOCK_OVERFLOW_ERR = -95,
    /**< LZ4 Block Overflow Error */
    CPA_DC_LZ4_TOKEN_IS_ZERO_ERR = -98,
    /**< LZ4 Decoded token offset or token length is zero */
    CPA_DC_LZ4_DISTANCE_OUT_OF_RANGE_ERR = -100,
    /**< LZ4 Distance out of range for len/distance pair */
} CpaDcReqStatus;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported modes for automatically selecting the best compression type.
 *
 * @description
 *      This enumeration lists the supported modes for automatically selecting
 *      the best encoding which would lead to the best compression results.
 *
 *      When CPA_DC_ASB_ENABLED is used the output will be a format compliant
 *      block, whether the data is compressed or not.
 *
 *      The following values are deprecated and should not be used. They
 *      will be removed in a future version of this file.
 *        - CPA_DC_ASB_STATIC_DYNAMIC
 *        - CPA_DC_ASB_UNCOMP_STATIC_DYNAMIC_WITH_STORED_HDRS
 *        - CPA_DC_ASB_UNCOMP_STATIC_DYNAMIC_WITH_NO_HDRS
 *
 *****************************************************************************/
typedef enum _CpaDcAutoSelectBest
{
    CPA_DC_ASB_DISABLED = 0,
    /**< Auto select best mode is disabled */
    CPA_DC_ASB_STATIC_DYNAMIC = 1,
    /**< Auto select between static and dynamic compression */
    CPA_DC_ASB_UNCOMP_STATIC_DYNAMIC_WITH_STORED_HDRS = 2,
    /**< Auto select between uncompressed, static and dynamic compression,
     * using stored block deflate headers if uncompressed is selected */
    CPA_DC_ASB_UNCOMP_STATIC_DYNAMIC_WITH_NO_HDRS = 3,
    /**< Auto select between uncompressed, static and dynamic compression,
     * using no deflate headers if uncompressed is selected */
    CPA_DC_ASB_ENABLED = 4,
    /**< Auto select best mode is enabled */
} CpaDcAutoSelectBest;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Supported modes for skipping regions of input or output buffers.
 *
 * @description
 *      This enumeration lists the supported modes for skipping regions of
 *      input or output buffers.
 *
 *****************************************************************************/
typedef enum _CpaDcSkipMode
{
    CPA_DC_SKIP_DISABLED = 0,
    /**< Skip mode is disabled */
    CPA_DC_SKIP_AT_START = 1,
    /**< Skip region is at the start of the buffer. */
    CPA_DC_SKIP_AT_END = 2,
    /**< Skip region is at the end of the buffer. */
    CPA_DC_SKIP_STRIDE = 3
    /**< Skip region occurs at regular intervals within the buffer.
     CpaDcSkipData.strideLength specifies the number of bytes between each
     skip region. */
} CpaDcSkipMode;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Service specific return codes
 *
 * @description
 *      Compression specific return codes
 *
 *
 *****************************************************************************/

#define CPA_DC_BAD_DATA     (-100)
    /**<Input data in invalid */

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Definition of callback function invoked for asynchronous cpaDc
 *      requests.
 *
 * @description
 *      This is the prototype for the cpaDc compression callback functions.
 *      The callback function is registered by the application using the
 *      cpaDcInitSession() function call.
 *
 * @context
 *      This callback function can be executed in a context that DOES NOT
 *      permit sleeping to occur.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param callbackTag   User-supplied value to help identify request.
 * @param status        Status of the operation. Valid values are
 *                      CPA_STATUS_SUCCESS, CPA_STATUS_FAIL and
 *                      CPA_STATUS_UNSUPPORTED.
 *
 * @retval
 *      None
 * @pre
 *      Component has been initialized.
 * @post
 *      None
 * @note
 *      None
 * @see
 *      None
 *
 *****************************************************************************/
typedef void (*CpaDcCallbackFn)(
    void *callbackTag,
    CpaStatus status);


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Implementation Capabilities Structure
 * @description
 *      This structure contains data relating to the capabilities of an
 *      implementation. The capabilities include supported compression
 *      algorithms, RFC 1951 options and whether the implementation supports
 *      both stateful and stateless compress and decompress sessions.
 *
 ****************************************************************************/
typedef struct _CpaDcInstanceCapabilities  {
        CpaBoolean  statefulLZSCompression;
            /**<True if the Instance supports Stateful LZS compression */
        CpaBoolean  statefulLZSDecompression;
            /**<True if the Instance supports Stateful LZS decompression */
        CpaBoolean  statelessLZSCompression;
            /**<True if the Instance supports Stateless LZS compression */
        CpaBoolean  statelessLZSDecompression;
            /**<True if the Instance supports Stateless LZS decompression */
        CpaBoolean  statefulLZSSCompression;
            /**<True if the Instance supports Stateful LZSS compression */
        CpaBoolean  statefulLZSSDecompression;
            /**<True if the Instance supports Stateful LZSS decompression */
        CpaBoolean  statelessLZSSCompression;
            /**<True if the Instance supports Stateless LZSS compression */
        CpaBoolean  statelessLZSSDecompression;
            /**<True if the Instance supports Stateless LZSS decompression */
        CpaBoolean  statefulELZSCompression;
            /**<True if the Instance supports Stateful Extended LZS
            compression */
        CpaBoolean  statefulELZSDecompression;
            /**<True if the Instance supports Stateful Extended LZS
            decompression */
        CpaBoolean  statelessELZSCompression;
            /**<True if the Instance supports Stateless Extended LZS
            compression */
        CpaBoolean  statelessELZSDecompression;
            /**<True if the Instance supports Stateless Extended LZS
            decompression */
        CpaBoolean  statefulDeflateCompression;
            /**<True if the Instance supports Stateful Deflate compression */
        CpaBoolean  statefulDeflateDecompression;
            /**<True if the Instance supports Stateful Deflate
            decompression */
        CpaBoolean  statelessDeflateCompression;
            /**<True if the Instance supports Stateless Deflate compression */
        CpaBoolean  statelessDeflateDecompression;
            /**<True if the Instance supports Stateless Deflate
            decompression */
        CpaBoolean  statelessLZ4Compression;
            /**<True if the Instance supports Stateless LZ4 compression */
        CpaBoolean  statelessLZ4Decompression;
            /**<True if the Instance supports Stateless LZ4 decompression */
        CpaBoolean  statefulLZ4Decompression;
            /**<True if the Instance supports Stateful LZ4 decompression */
        CpaBoolean  statelessLZ4SCompression;
            /**<True if the Instance supports Stateless LZ4S compression */
        CpaBoolean  checksumCRC32;
            /**<True if the Instance can calculate a CRC32 checksum over
                the uncompressed data. This value is only calculated when
                CPA_DC_DEFLATE is configured as the algorithm for
                CpaDcCompType */
        CpaBoolean  checksumAdler32;
            /**<True if the Instance can calculate an Adler-32 checksum over
                the uncompressed data. This value is only calculated when
                CPA_DC_DEFLATE is configured as the algorithm for
                CpaDcCompType */
        CpaBoolean  checksumXXHash32;
            /**<True if the Instance can calculate an xxHash-32 hash over
                the uncompressed data. This value is only calculated when
                CPA_DC_LZ4 or CPA_DC_LZ4S is configured as the algorithm for
                CpaDcCompType */
        CpaBoolean  dynamicHuffman;
            /**<True if the Instance supports dynamic Huffman trees in deflate
                blocks */
        CpaBoolean  dynamicHuffmanBufferReq;
            /**<True if an Instance specific buffer is required to perform
                a dynamic Huffman tree deflate request */
        CpaBoolean  precompiledHuffman;
            /**<True if the Instance supports precompiled Huffman trees in
                deflate blocks */
        CpaBoolean  autoSelectBestHuffmanTree;
            /**<True if the Instance has the ability to automatically select
                between different Huffman encoding schemes for better
                compression ratios */
        Cpa8U       validWindowSizeMaskCompression;
            /**<Bits set to '1' for each valid window size supported by
                the compression implementation */
        Cpa8U       validWindowSizeMaskDecompression;
            /**<Bits set to '1' for each valid window size supported by
                the decompression implementation */
        Cpa32U      internalHuffmanMem;
            /**<Number of bytes internally available to be used when
                    constructing dynamic Huffman trees. */
        CpaBoolean  endOfLastBlock;
            /**< True if the Instance supports stopping at the end of the last
             * block in a deflate stream during a decompression operation and
             * reporting that the end of the last block has been reached as
             * part of the CpaDcReqStatus data. */
        CpaBoolean  reportParityError;
            /**<True if the instance supports parity error reporting. */
        CpaBoolean  batchAndPack;
            /**< True if the instance supports 'batch and pack' compression */
        CpaBoolean  compressAndVerify;
            /**<True if the instance supports checking that compressed data,
             * generated as part of a compression operation, can be
             * successfully decompressed. */
        CpaBoolean  compressAndVerifyStrict;
            /**< True if compressAndVerify is 'strictly' enabled for the
             * instance. If strictly enabled, compressAndVerify will be enabled
             * by default for compression operations and cannot be disabled by
             * setting opData.compressAndVerify=0 with cpaDcCompressData2().
             * Compression operations with opData.compressAndVerify=0 will
             * return a CPA_STATUS_INVALID_PARAM error status when in
             * compressAndVerify strict mode.
             */
        CpaBoolean  compressAndVerifyAndRecover;
            /**<True if the instance supports recovering from errors detected
             * by compressAndVerify by generating a stored block in the
             * compressed output data buffer. This stored block replaces any
             * compressed content that resulted in a compressAndVerify error.
             */
        CpaBoolean integrityCrcs;
            /**<True if the instance supports 32 bit integrity CRC checking in
             * the compression/decompression datapath. Refer to
             * @ref CpaDcOpData for more details on integrity checking. */
        CPA_BITMAP(dcChainCapInfo, CPA_DC_CHAIN_CAP_BITMAP_SIZE);
            /**< Bitmap representing which chaining capabilities are supported
             * by the instance.
             * Bits can be tested using the macro @ref CPA_BITMAP_BIT_TEST.
             * The bit positions are those specified in the enumerated type
             * @ref CpaDcChainOperations in cpa_dc_chain.h. */
        CpaBoolean integrityCrcs64b;
            /**<True if the instance supports 64 bit integrity CRC checking in
             * the compression / decompression datapath. Refer to
             * @ref CpaDcOpData for more details on integrity checking. */
} CpaDcInstanceCapabilities;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Session Setup Data.
 * @description
 *      This structure contains data relating to setting up a session. The
 *      client needs to complete the information in this structure in order to
 *      setup a session.
 *
 ****************************************************************************/
typedef struct _CpaDcSessionSetupData  {
        CpaDcCompLvl compLevel;
          /**<Compression Level from CpaDcCompLvl */
        CpaDcCompType compType;
          /**<Compression type from CpaDcCompType */
        CpaDcHuffType huffType;
          /**<Huffman type from CpaDcHuffType */
        CpaDcAutoSelectBest autoSelectBestHuffmanTree;
          /**<Indicates if and how the implementation should select the best
           * Huffman encoding. */
        CpaDcSessionDir sessDirection;
         /**<Session direction indicating whether session is used for
            compression, decompression or both */
        CpaDcSessionState sessState;
        /**<Session state indicating whether the session should be configured
            as stateless or stateful */
        CpaDcCompWindowSize windowSize;
        /**<Window size from CpaDcCompWindowSize */
        CpaDcCompMinMatch minMatch;
        /**<Min Match size from CpaDcCompMinMatch */
        CpaDcCompLZ4BlockMaxSize lz4BlockMaxSize;
        /**<Window size from CpaDcCompLZ4BlockMaxSize */
        CpaBoolean lz4BlockChecksum;
        /**<LZ4 Block Checksum setting for the LZ4 request.
            For LZ4 decompression operations, this setting must be set based
            on the B.Checksum flag originating from the LZ4 frame header.
            For LZ4 compression operations, this setting will be ignored as
            the implementation does not support generation of Data Block
            checksums. */
        CpaBoolean lz4BlockIndependence;
        /**<LZ4 Block Independence Flag setting.
            For LZ4 compression operations, this setting must be set based on
            the Block Independence Flag originating from the LZ4 frame header.
            For LZ4 decompression operations, this setting is ignored.
        For data compressed with lz4BlockIndependence set to CPA_FALSE,
            it is not possible to perform parallel decompression on the
            compressed blocks. It is also not possible to access the produced
            LZ4 blocks randomly.
            */
        CpaDcChecksum checksum;
        /**<Desired checksum required for the session */
        CpaBoolean accumulateXXHash;
        /**<If TRUE the xxHash calculation for LZ4 requests using the session
            based API, cpaDcCompressData2 and cpaDcCompressData, will be
            accumulated across requests, with a valid xxHash being written to
            CpaDcRqResults.checksum for the request which specifies
            CPA_DC_FLUSH_FINAL in CpaDcOpData.flushFlag. When the
            CPA_DC_FLUSH_FINAL is received, the internal XXHash state will be
            reset for this session.
            One exception is if a CPA_DC_OVERFLOW error is returned, the xxHash
            value in the checksum field will be valid for requests up to that
            point and the internal XXHash state will not be reset. This will
            allow a user to either create an LZ4 frame based off the data at the
            time of overflow, or correct the overflow condition and continue
            submitting requests until specifying CPA_DC_FLUSH_FINAL.
            Additionally the user can force the internal XXHash state to reset
            (even on overflow) by calling cpaDcResetXXHashState on this session.
            For the sessionless API, cpaDcNsCompressData, this flag will have
            no effect */
} CpaDcSessionSetupData;

typedef CpaDcSessionSetupData CpaDcNsSetupData;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Session Update Data.
 * @description
 *      This structure contains data relating to updating up a session. The
 *      client needs to complete the information in this structure in order to
 *      update a session.
 *
 ****************************************************************************/
typedef struct _CpaDcSessionUpdateData  {
        CpaDcCompLvl compLevel;
          /**<Compression Level from CpaDcCompLvl */
        CpaDcHuffType huffType;
          /**<Huffman type from CpaDcHuffType */
        CpaBoolean   enableDmm;
        /**<Desired DMM required for the session */
} CpaDcSessionUpdateData ;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Statistics Data.
 * @description
 *      This structure contains data elements corresponding to statistics.
 *      Statistics are collected on a per instance basis and include:
 *      jobs submitted and completed for both compression and decompression.
 *
 ****************************************************************************/
typedef struct _CpaDcStats  {
        Cpa64U numCompRequests;
          /**< Number of successful compression requests */
        Cpa64U numCompRequestsErrors;
          /**< Number of compression requests that had errors and
             could not be processed */
        Cpa64U numCompCompleted;
          /**< Compression requests completed */
        Cpa64U numCompCompletedErrors;
          /**< Compression requests not completed due to errors */
        Cpa64U numCompCnvErrorsRecovered;
          /**< Compression CNV errors that have been recovered */

        Cpa64U numDecompRequests;
          /**< Number of successful decompression requests */
        Cpa64U numDecompRequestsErrors;
          /**< Number of decompression requests that had errors and
             could not be processed */
        Cpa64U numDecompCompleted;
          /**< Decompression requests completed */
        Cpa64U numDecompCompletedErrors;
          /**< Decompression requests not completed due to errors */

} CpaDcStats;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Request results data
 * @description
 *      This structure contains the request results.
 *
 *      For stateful sessions the status, produced, consumed and
 *      endOfLastBlock results are per request values while the checksum
 *      value is cumulative across all requests on the session so far.
 *      In this case the checksum value is not guaranteed to be correct
 *      until the final compressed data has been processed.
 *
 *      For stateless sessions, an initial checksum value is passed into
 *      the stateless operation. Once the stateless operation completes,
 *      the checksum value will contain checksum produced by the operation.
 *
 ****************************************************************************/
typedef struct _CpaDcRqResults  {
        CpaDcReqStatus status;
          /**< Additional status details from accelerator */
        Cpa32U produced;
          /**< Octets produced by the operation.
           * For Data Plane "partial read" operations, the size of the produced
           * data should be equal to the sum of the data offset and length of
           * the requested decompressed data chunk.
           * See ref @CpaDcDpPartialReadData. */
        Cpa32U consumed;
          /**< Octets consumed by the operation */
        Cpa32U checksum;
          /**< The checksum produced by the operation. For some checksum
           * algorithms, setting this field on the input to a stateless
           * compression/decompression request can be used to pass in an initial
           * checksum value that will be used to seed the checksums produced by
           * the stateless operation.
           *
           * The checksum algorithm CPA_DC_XXHASH32 does not support passing an
           * input value in this parameter. Any initial value passed will be
           * ignored by the compression/decompression operation when this
           * checksum algorithm is used.
           *
           * For Data Plane "partial read" operations, the checksum is computed
           * from the beginning of the decompressed data to the end of the
           * requested chunk. See ref @CpaDcDpPartialReadData. */
        CpaBoolean endOfLastBlock;
          /**< Decompression operation has stopped at the end of the last
           * block in a deflate stream. */
        CpaBoolean dataUncompressed;
          /**< If TRUE the output data for this request is uncompressed and
           * in the format setup for the request. This value is only valid
           * for CPA_DC_ASB_ENABLED or if compressAndVerifyAndRecover is set to
           * TRUE in the CpaDcOpData structure for a request. */
} CpaDcRqResults;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Integrity CRC Size
 * @description
 * 	Enum of possible integrity CRC sizes.
 *
 ****************************************************************************/
typedef enum _CpaDcIntegrityCrcSize
{
    CPA_DC_INTEGRITY_CRC32 = 0,
    /**< 32-bit Integrity CRCs */
    CPA_DC_INTEGRITY_CRC64,
    /**< 64-bit integrity CRCs */
} CpaDcIntegrityCrcSize;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Integrity CRC calculation details
 * @description
 *      This structure contains information about resulting integrity CRC
 *      calculations performed for a single request.
 *
 ****************************************************************************/
typedef struct _CpaIntegrityCrc {
        Cpa32U iCrc;   /**< CRC calculated on request's input  buffer */
        Cpa32U oCrc;   /**< CRC calculated on request's output buffer */
} CpaIntegrityCrc;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Integrity CRC64 calculation details
 * @description
 *      This structure contains information about resulting integrity CRC64
 *      calculations performed for a single request.
 *
 ****************************************************************************/
typedef struct _CpaIntegrityCrc64b {
        Cpa64U iCrc;   /**< CRC calculated on request's input  buffer */
        Cpa64U oCrc;   /**< CRC calculated on request's output buffer */
} CpaIntegrityCrc64b;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Collection of CRC related data
 * @description
 *      This structure contains data facilitating CRC calculations.
 *      After successful request, this structure will contain
 *      all resulting CRCs.
 *      Integrity specific CRCs (when enabled/supported) are located in
 *      'CpaIntegrityCrc integrityCrc' field for 32bit values and in
 *      'CpaIntegrityCrc64b integrityCrC64b' field for 64 bit values.
 *      Integrity CRCs cannot be accumulated across multiple requests and
 *      do not provide seeding capabilities.
 * @note
 *      this structure must be allocated in physical contiguous memory
 *
 ****************************************************************************/
typedef struct _CpaCrcData {
        Cpa32U crc32;
        /**< CRC32 calculated on the input buffer during compression
         * requests and on the output buffer during decompression requests. */
        Cpa32U adler32;
        /**< Adler32 calculated on the input buffer during compression
         * requests and on the output buffer during decompression requests. */
        CpaIntegrityCrc integrityCrc;
          /**< 32bit Integrity CRCs */
        CpaIntegrityCrc64b integrityCrc64b;
          /**< 64bit Integrity CRCs */
} CpaCrcData;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Skip Region Data.
 * @description
 *      This structure contains data relating to configuring skip region
 *      behaviour. A skip region is a region of an input buffer that
 *      should be omitted from processing or a region that should be inserted
 *      into the output buffer.
 *
 ****************************************************************************/
typedef struct _CpaDcSkipData {
        CpaDcSkipMode skipMode;
        /**<Skip mode from CpaDcSkipMode for buffer processing */
        Cpa32U skipLength;
        /**<Number of bytes to skip when skip mode is enabled */
        Cpa32U strideLength;
        /**<Size of the stride between skip regions when skip mode is
         * set to CPA_DC_SKIP_STRIDE. */
        Cpa32U firstSkipOffset;
        /**< Number of bytes to skip in a buffer before reading/writing the
         * input/output data. */
} CpaDcSkipData;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      (De)Compression request input parameters.
 * @description
 *      This structure contains the request information for use with
 *      compression operations.
 *
 ****************************************************************************/
typedef struct _CpaDcOpData  {
        CpaDcFlush flushFlag;
        /**< Indicates the type of flush to be performed. */
        CpaBoolean compressAndVerify;
        /**< If set to true, for compression operations, the implementation
         * will verify that compressed data, generated by the compression
         * operation, can be successfully decompressed.
         * This behavior is only supported for stateless compression.
         * This behavior is only supported on instances that support the
         * compressAndVerify capability. */
        CpaBoolean compressAndVerifyAndRecover;
        /**< If set to true, for compression operations, the implementation
         * will automatically recover from a compressAndVerify error.
         * This behavior is only supported for stateless compression.
         * This behavior is only supported on instances that support the
         * compressAndVerifyAndRecover capability.
         * The compressAndVerify field in CpaDcOpData MUST be set to CPA_TRUE
         * if compressAndVerifyAndRecover is set to CPA_TRUE. */
        CpaBoolean integrityCrcCheck;
        /**< If set to true, the implementation will verify that data
         * integrity is preserved through the processing pipeline.
         *
         * Integrity CRC checking is not supported for decompression operations
         * over data that contains multiple gzip headers. */
        CpaBoolean verifyHwIntegrityCrcs;
        /**< If set to true, software calculated CRCs will be compared
         * against hardware generated integrity CRCs to ensure that data
         * integrity is maintained when transferring data to and from the
         * hardware accelerator. */
        CpaDcIntegrityCrcSize integrityCrcSize;
        /**< This option specifies the size of the CRC to be used for data
         * integrity checking. As such it is only valid if this request is
         * configured for data integrity checks. */
        CpaDcSkipData inputSkipData;
        /**< Optional skip regions in the input buffers */
        CpaDcSkipData outputSkipData;
        /**< Optional skip regions in the output buffers */
        CpaCrcData *pCrcData;
        /**< Pointer to CRCs for this operation, when integrity checks
         * are enabled. */
} CpaDcOpData;

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Retrieve Instance Capabilities
 *
 * @description
 *      This function is used to retrieve the capabilities matrix of
 *      an instance.
 *
 * @context
 *      This function shall not be called in an interrupt context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance      Instance handle derived from discovery
 *                                  functions
 * @param[in,out]   pInstanceCapabilities   Pointer to a capabilities struct
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE       Error related to system resources.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      Only a synchronous version of this function is provided.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcQueryCapabilities(  CpaInstanceHandle dcInstance,
        CpaDcInstanceCapabilities *pInstanceCapabilities );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Initialize compression decompression session
 *
 * @description
 *      This function is used to initialize a compression/decompression
 *      session.
 *      This function specifies a BufferList for context data.
 *      A single session can be used for both compression and decompression
 *      requests.  Clients MAY register a callback
 *      function for the compression service using this function.
 *      This function returns a unique session handle each time this function
 *      is invoked.
 *      If the session has been configured with a callback function, then
 *      the order of the callbacks are guaranteed to be in the same order the
 *      compression or decompression requests were submitted for each session,
 *      so long as a single thread of execution is used for job submission.
 *
 * @context
 *      This is a synchronous function and it cannot sleep. It can be executed in
 *      a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance      Instance handle derived from discovery
 *                                  functions.
 * @param[in,out]   pSessionHandle  Pointer to a session handle.
 * @param[in,out]   pSessionData    Pointer to a user instantiated structure
 *                                  containing session data.
 * @param[in]       pContextBuffer  pointer to context buffer.  This is not
 *                                  required for stateless operations.
 *                                  The total size of the buffer list must
 *                                  be equal to or larger than the specified
 *                                  contextSize retrieved from the
 *                                  cpaDcGetSessionSize() function.
 * @param[in]        callbackFn     For synchronous operation this callback
 *                                  shall be a null pointer.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE       Error related to system resources.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      dcInstance has been started using cpaDcStartInstance.
 * @post
 *      None
 * @note
 *      Only a synchronous version of this function is provided.
 *
 *      This initializes opaque data structures in the session handle. Data
 *      compressed under this session will be compressed to the level
 *      specified in the pSessionData structure. Lower compression level
 *      numbers indicate a request for faster compression at the
 *      expense of compression ratio.  Higher compression level numbers
 *      indicate a request for higher compression ratios at the expense of
 *      execution time.
 *
 *      The session is opaque to the user application and the session handle
 *      contains job specific data.
 *
 *      The pointer to the ContextBuffer will be stored in session specific
 *      data if required by the implementation.
 *
 *      It is not permitted to have multiple
 *      outstanding asynchronous compression requests for stateful sessions.
 *      It is possible to add
 *      parallelization to compression by using multiple sessions.
 *
 *      The window size specified in the pSessionData must be match exactly
 *      one of the supported window sizes specified in the capabilities
 *      structure.  If a bi-directional session is being initialized, then
 *      the window size must be valid for both compress and decompress.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcInitSession( CpaInstanceHandle     dcInstance,
        CpaDcSessionHandle              pSessionHandle,
        CpaDcSessionSetupData           *pSessionData,
        CpaBufferList                   *pContextBuffer,
        CpaDcCallbackFn                 callbackFn );


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Session Reset Function.
 *
 * @description
 *      This function will reset a previously initialized session handle
 *      Reset will fail if outstanding calls still exist for the initialized
 *      session handle.
 *      The client needs to retry the reset function at a later time.
 *
 * @context
 *      This is a synchronous function that cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in,out]  pSessionHandle  Session handle.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_RETRY          Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 *      The session has been initialized via cpaDcInitSession function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcInitSession()
 *
 *****************************************************************************/
CpaStatus
cpaDcResetSession(const CpaInstanceHandle dcInstance,
        CpaDcSessionHandle pSessionHandle );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Reset of the xxHash internal state on a session.
 *
 * @description
 *      This function will reset the internal xxHash state maintained within a
 *      session. This would be used in conjunction with the
 *      CpaDcSessionSetupData.accumulateXXHash flag being set to TRUE for this
 *      session. It will enable resetting (reinitialising) just the xxHash
 *      calculation back to the state when the session was first initialised.
 *
 * @context
 *      This is a synchronous function that cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in,out]  pSessionHandle  Session handle.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 *      The session has been initialized via cpaDcInitSession function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *
 *****************************************************************************/
CpaStatus
cpaDcResetXXHashState(const CpaInstanceHandle dcInstance,
        CpaDcSessionHandle pSessionHandle );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Session Update Function.
 *
 * @description
 *      This function is used to modify some select compression parameters
 *      of a previously initialized session handle.
 *      Th update will fail if resources required for the new session settings
 *      are not available. Specifically, this function may fail if no
 *      intermediate buffers are associated with the instance, and the
 *      intended change would require these buffers.
 *      This function can be called at any time after a successful call of
 *      cpaDcDpInitSession().
 *      This function does not change the parameters to compression request
 *      already in flight.
 *
 * @context
 *      This is a synchronous function that cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance            Instance handle.
 * @param[in,out]  pSessionHandle        Session handle.
 * @param[in]      pSessionUpdateData    Session Data.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE       Error related to system resources.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting.
 *                                   Resubmit the request
 *
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 *      The session has been initialized via cpaDcInitSession function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcInitSession()
 *
 *****************************************************************************/
CpaStatus cpaDcUpdateSession(const CpaInstanceHandle dcInstance,
        CpaDcSessionHandle pSessionHandle,
        CpaDcSessionUpdateData *pSessionUpdateData );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Session Remove Function.
 *
 * @description
 *      This function will remove a previously initialized session handle
 *      and the installed callback handler function. Removal will fail if
 *      outstanding calls still exist for the initialized session handle.
 *      The client needs to retry the remove function at a later time.
 *      The memory for the session handle MUST not be freed until this call
 *      has completed successfully.
 *
 * @context
 *      This is a synchronous function that cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in,out]  pSessionHandle  Session handle.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_RETRY          Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE       Error related to system resources.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcInitSession()
 *
 *****************************************************************************/
CpaStatus
cpaDcRemoveSession(const CpaInstanceHandle dcInstance,
        CpaDcSessionHandle pSessionHandle );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Deflate Compression Bound API
 *
 * @description
 *      This function provides the maximum output buffer size for a Deflate
 *      compression operation in the "worst case" (non-compressible) scenario.
 *      It's primary purpose is for output buffer memory allocation.
 *
 * @context
 *      This is a synchronous function that will not sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in]      huffType        CpaDcHuffType to be used with this operation.
 * @param[in]      inputSize       Input Buffer size.
 * @param[out]     outputSize      Maximum output buffer size.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *      The cpaDcDeflateCompressBound() API is intended to reduce the likelihood
 *      of overflow occurring during compression operations. An overflow may
 *      occur in some exception cases.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcDeflateCompressBound(const CpaInstanceHandle dcInstance,
        CpaDcHuffType huffType,
        Cpa32U inputSize,
        Cpa32U *outputSize );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      LZ4 Compression Bound API
 *
 * @description
 *      This function provides the maximum output buffer size for a LZ4
 *      compression operation in the "worst case" (non-compressible) scenario.
 *      It's primary purpose is for output buffer memory allocation.
 *
 * @context
 *      This is a synchronous function that will not sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in]      inputSize       Input Buffer size.
 * @param[out]     outputSize      Maximum output buffer size.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcLZ4CompressBound(const CpaInstanceHandle dcInstance,
        Cpa32U inputSize,
        Cpa32U *outputSize );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      LZ4S Compression Bound API
 *
 * @description
 *      This function provides the maximum output buffer size for a LZ4S
 *      compression operation in the "worst case" (non-compressible) scenario.
 *      It's primary purpose is for output buffer memory allocation.
 *
 * @context
 *      This is a synchronous function that will not sleep. It can be
 *      executed in a context that does not permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]      dcInstance      Instance handle.
 * @param[in]      inputSize       Input Buffer size.
 * @param[out]     outputSize      Maximum output buffer size.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance function.
 * @post
 *      None
 * @note
 *      This is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcLZ4SCompressBound(const CpaInstanceHandle dcInstance,
        Cpa32U inputSize,
        Cpa32U *outputSize );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to compress a buffer of data.
 *
 * @description
 *      This API consumes data from the input buffer and generates compressed
 *      data in the output buffer.
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in,out]   pSessionHandle      Session handle.
 * @param[in]       pSrcBuff            Pointer to data buffer for compression.
 * @param[in]       pDestBuff           Pointer to buffer space for data after
 *                                      compression.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]       flushFlag           Indicates the type of flush to be
 *                                      performed.
 * @param[in]       callbackTag         User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_DC_BAD_DATA          The input data was not properly formed.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 * @post
 *     pSessionHandle has session related state information
 * @note
 *     This function passes control to the compression service for processing
 *
 *  In synchronous mode the function returns the error status returned from the
 *      service. In asynchronous mode the status is returned by the callback
 *      function.
 *
 *  This function may be called repetitively with input until all of the
 *  input has been consumed by the compression service and all the output
 *      has been produced.
 *
 *  When this function returns, it may be that all of the available data
 *  in the input buffer has not been compressed.  This situation will
 *  occur when there is insufficient space in the output buffer.  The
 *  calling application should note the amount of data processed, and clear
 *  the output buffer and then submit the request again, with the input
 *  buffer pointer to the data that was not previously compressed.
 *
 *  Relationship between input buffers and results buffers.
 *  -# Implementations of this API must not modify the individual
 *     flat buffers of the input buffer list.
 *  -# The implementation communicates the amount of data
 *     consumed from the source buffer list via pResults->consumed arg.
 *  -# The implementation communicates the amount of data in the
 *     destination buffer list via pResults->produced arg.
 *
 *  Source Buffer Setup Rules
 *  -# The buffer list must have the correct number of flat buffers. This
 *         is specified by the numBuffers element of the CpaBufferList.
 *  -# Each flat buffer must have a pointer to contiguous memory that has
 *     been allocated by the calling application.  The
 *         number of octets to be compressed or decompressed must be stored
 *     in the dataLenInBytes element of the flat buffer.
 *  -# It is permissible to have one or more flat buffers with a zero length
 *     data store.  This function will process all flat buffers until the
 *     destination buffer is full or all source data has been processed.
 *     If a buffer has zero length, then no data will be processed from
 *     that buffer.
 *
 *  Source Buffer Processing Rules.
 *  -# The buffer list is processed in index order - SrcBuff->pBuffers[0]
 *     will be completely processed before SrcBuff->pBuffers[1] begins to
 *     be processed.
 *  -# The application must drain the destination buffers.
 *     If the source data was not completely consumed, the application
 *     must resubmit the request.
 *  -# On return, the pResults->consumed will indicate the number of bytes
 *     consumed from the input buffers.
 *
 *  Destination Buffer Setup Rules
 *  -# The destination buffer list must have storage for processed data.
 *     This implies at least one flat buffer must exist in the buffer list.
 *  -# For each flat buffer in the buffer list, the dataLenInBytes element
 *     must be set to the size of the buffer space.
 *  -# It is permissible to have one or more flat buffers with a zero length
 *         data store.
 *     If a buffer has zero length, then no data will be added to
 *     that buffer.
 *
 *  Destination Buffer Processing Rules.
 *  -# The buffer list is processed in index order - DestBuff->pBuffers[0]
 *     will be completely processed before DestBuff->pBuffers[1] begins to
 *     be processed.
 *  -# On return, the pResults->produced will indicate the number of bytes
 *     written to the output buffers.
 *  -# If processing has not been completed, the application must drain the
 *         destination buffers and resubmit the request. The application must
 *         reset the dataLenInBytes for each flat buffer in the destination
 *         buffer list.
 *
 *  Checksum rules.
 *      If a checksum is specified in the session setup data, then:
 *  -# For the first request for a particular data segment the checksum
 *     is initialised internally by the implementation.
 *  -# The checksum is maintained by the implementation between calls
 *         until the flushFlag is set to CPA_DC_FLUSH_FINAL indicating the
 *         end of a particular data segment.
 *      -# Intermediate checksum values are returned to the application,
 *         via the CpaDcRqResults structure, in response to each request.
 *         However these checksum values are not guaranteed to the valid
 *         until the call with flushFlag set to CPA_DC_FLUSH_FINAL
 *         completes successfully.
 *
 *  The application should set flushFlag to
 *      CPA_DC_FLUSH_FINAL to indicate processing a particular data segment
 *      is complete. It should be noted that this function may have to be
 *      called more than once to process data after the flushFlag parameter has
 *      been set to CPA_DC_FLUSH_FINAL if the destination buffer fills.  Refer
 *      to buffer processing rules.
 *
 *  For stateful operations, when the function is invoked with flushFlag
 *  set to CPA_DC_FLUSH_NONE or CPA_DC_FLUSH_SYNC, indicating more data
 *  is yet to come, the function may or may not retain data.  When the
 *  function is invoked with flushFlag set to CPA_DC_FLUSH_FULL or
 *  CPA_DC_FLUSH_FINAL, the function will process all buffered data.
 *
 *  For stateless operations, CPA_DC_FLUSH_FINAL will cause the BFINAL
 *  bit to be set for deflate compression. The initial checksum for the
 *  stateless operation should be set to 0. CPA_DC_FLUSH_NONE and
 *  CPA_DC_FLUSH_SYNC should not be used for stateless operations.
 *
 *  It is possible to maintain checksum and length information across
 *  cpaDcCompressData() calls with a stateless session without maintaining
 *  the full history state that is maintained by a stateful session. In this
 *  mode of operation, an initial checksum value of 0 is passed into the
 *  first cpaDcCompressData() call with the flush flag set to
 *  CPA_DC_FLUSH_FULL. On subsequent calls to cpaDcCompressData() for this
 *  session, the checksum passed to cpaDcCompressData should be set to the
 *  checksum value produced by the previous call to cpaDcCompressData().
 *  When the last block of input data is passed to cpaDcCompressData(), the
 *  flush flag should be set to CPA_DC_FLUSH_FINAL. This will cause the BFINAL
 *  bit to be set in a deflate stream. It is the responsibility of the calling
 *  application to maintain overall lengths across the stateless requests
 *  and to pass the checksum produced by one request into the next request.
 *
 *  When an instance supports compressAndVerifyAndRecover, it is enabled by
 *  default when using cpaDcCompressData(). If this feature needs to be
 *  disabled, cpaDcCompressData2() must be used.
 *
 *  Synchronous or Asynchronous operation of the API is determined by
 *  the value of the callbackFn parameter passed to cpaDcInitSession()
 *  when the sessionHandle was setup. If a non-NULL value was specified
 *  then the supplied callback function will be invoked asynchronously
 *  with the response of this request.
 *
 *  Response ordering:
 *  For each session, the implementation must maintain the order of
 *  responses.  That is, if in asynchronous mode, the order of the callback
 *  functions must match the order of jobs submitted by this function.
 *  In a simple synchronous mode implementation, the practice of submitting
 *  a request and blocking on its completion ensure ordering is preserved.
 *
 *  This limitation does not apply if the application employs multiple
 *  threads to service a single session.
 *
 *  If this API is invoked asynchronous, the return code represents
 *  the success or not of asynchronously scheduling the request.
 *  The results of the operation, along with the amount of data consumed
 *  and produced become available when the callback function is invoked.
 *  As such, pResults->consumed and pResults->produced are available
 *  only when the operation is complete.
 *
 *  The application must not use either the source or destination buffers
 *  until the callback has completed.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcCompressData( CpaInstanceHandle dcInstance,
        CpaDcSessionHandle  pSessionHandle,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcRqResults      *pResults,
        CpaDcFlush          flushFlag,
        void                 *callbackTag );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to compress a buffer of data.
 *
 * @description
 *      This API consumes data from the input buffer and generates compressed
 *      data in the output buffer. This API is very similar to
 *      cpaDcCompressData() except it provides a CpaDcOpData structure for
 *      passing additional input parameters not covered in cpaDcCompressData().
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in,out]   pSessionHandle      Session handle.
 * @param[in]       pSrcBuff            Pointer to data buffer for compression.
 * @param[in]       pDestBuff           Pointer to buffer space for data after
 *                                      compression.
 * @param[in,out]   pOpData             Additional parameters.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]       callbackTag         User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_DC_BAD_DATA          The input data was not properly formed.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 * @post
 *     pSessionHandle has session related state information
 * @note
 *     This function passes control to the compression service for processing
 *
 * @see
 *      cpaDcCompressData()
 *
 *****************************************************************************/
CpaStatus
cpaDcCompressData2( CpaInstanceHandle dcInstance,
        CpaDcSessionHandle  pSessionHandle,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcOpData         *pOpData,
        CpaDcRqResults      *pResults,
        void                 *callbackTag );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to compress a buffer of data without requiring a
 *      session to be created. This is a No-Session (Ns) variant of the
 *      cpaDcCompressData function.
 *
 * @description
 *      This API consumes data from the input buffer and generates compressed
 *      data in the output buffer. Unlike the other compression APIs this
 *      does not use a previously created session. This is a "one-shot" API
 *      that requests can be directly submitted to.
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in]       pSetupData          Configuration structure for compression.
 * @param[in]       pSrcBuff            Pointer to data buffer for compression.
 * @param[in]       pDestBuff           Pointer to buffer space for data after
 *                                      compression.
 * @param[in]       pOpData             Additional input parameters.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]       callbackFn          For synchronous operation this callback
 *                                      shall be a null pointer.
 * @param[in]       callbackTag         User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 *
 * @pre
 *     None
 * @post
 *     None
 * @note
 *     This function passes control to the compression service for processing
 *
 *  Checksum rules.
 *     The checksum rules are the same as those for the session based APIs
 *     (cpaDcCompressData or cpaDcCompressData2) with the following exception.
 *     -# If the algorithm specified is CPA_DC_LZ4 or CPA_DC_LZ4S the xxHash32
 *        checksum will not be maintained across calls to the API. The
 *        implication is that the xxHash32 value will only be valid for the
 *        output of a single request, no state will be saved. If an LZ4 frame is
 *        required, even in recoverable error scenarios such as CPA_DC_OVERFLOW,
 *        the checksum will not be continued. If that is required the session
 *        based API must be used.
 *
 * @see
 *     None
 *
 *****************************************************************************/
CpaStatus
cpaDcNsCompressData( CpaInstanceHandle dcInstance,
        CpaDcNsSetupData    *pSetupData,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcOpData         *pOpData,
        CpaDcRqResults      *pResults,
        CpaDcCallbackFn     callbackFn,
        void                *callbackTag );
/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to decompress a buffer of data.
 *
 * @description
 *      This API consumes compressed data from the input buffer and generates
 *      uncompressed data in the output buffer.
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in,out]   pSessionHandle      Session handle.
 * @param[in]       pSrcBuff            Pointer to data buffer for compression.
 * @param[in]       pDestBuff           Pointer to buffer space for data
 *                                      after decompression.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]       flushFlag           When set to CPA_DC_FLUSH_FINAL, indicates
 *                                      that the input buffer contains all of
 *                                      the data for the compression session,
 *                                      allowing the function to release
 *                                      history data.
 * @param[in]        callbackTag        User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_DC_BAD_DATA          The input data was not properly formed.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 * @post
 *     pSessionHandle has session related state information
 * @note
 *      This function passes control to the compression service for
 *      decompression.  The function returns the status from the service.
 *
 *      This function may be called repetitively with input until all of the
 *      input has been provided and all the output has been consumed.
 *
 *      This function has identical buffer processing rules as
 *      cpaDcCompressData().
 *
 *      This function has identical checksum processing rules as
 *      cpaDcCompressData().
 *
 *      The application should set flushFlag to
 *      CPA_DC_FLUSH_FINAL to indicate processing a particular compressed
 *      data segment is complete. It should be noted that this function may
 *      have to be called more than once to process data after flushFlag
 *      has been set if the destination buffer fills.  Refer to
 *      buffer processing rules in cpaDcCompressData().
 *
 *      Synchronous or Asynchronous operation of the API is determined by
 *      the value of the callbackFn parameter passed to cpaDcInitSession()
 *      when the sessionHandle was setup. If a non-NULL value was specified
 *      then the supplied callback function will be invoked asynchronously
 *      with the response of this request, along with the callbackTag
 *      specified in the function.
 *
 *      The same response ordering constraints identified in the
 *      cpaDcCompressData API apply to this function.
 *
 * @see
 *      cpaDcCompressData()
 *
 *****************************************************************************/
CpaStatus
cpaDcDecompressData( CpaInstanceHandle dcInstance,
        CpaDcSessionHandle  pSessionHandle,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcRqResults      *pResults,
        CpaDcFlush          flushFlag,
        void                *callbackTag );


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to decompress a buffer of data.
 *
 * @description
 *      This API consumes compressed data from the input buffer and generates
 *      uncompressed data in the output buffer. This API is very similar to
 *      cpaDcDecompressData() except it provides a CpaDcOpData structure for
 *      passing additional input parameters not covered in cpaDcDecompressData().
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in,out]   pSessionHandle      Session handle.
 * @param[in]       pSrcBuff            Pointer to data buffer for compression.
 * @param[in]       pDestBuff           Pointer to buffer space for data
 *                                      after decompression.
 * @param[in]       pOpData             Additional input parameters.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]        callbackTag        User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_DC_BAD_DATA          The input data was not properly formed.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 * @post
 *     pSessionHandle has session related state information
 * @note
 *      This function passes control to the compression service for
 *      decompression.  The function returns the status from the service.
 *
 * @see
 *      cpaDcDecompressData()
 *      cpaDcCompressData2()
 *      cpaDcCompressData()
 *
 *****************************************************************************/
CpaStatus
cpaDcDecompressData2( CpaInstanceHandle dcInstance,
        CpaDcSessionHandle  pSessionHandle,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcOpData         *pOpData,
        CpaDcRqResults      *pResults,
        void                *callbackTag );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Submit a request to decompress a buffer of data without requiring a
 *      session to be created. This is a No-Session (Ns) variant of the
 *      cpaDcDecompressData function.
 *
 * @description
 *      This API consumes data from the input buffer and generates decompressed
 *      data in the output buffer. Unlike the other decompression APIs this
 *      does not use a previously created session. This is a "one-shot" API
 *      that requests can be directly submitted to.
 *
 * @context
 *      When called as an asynchronous function it cannot sleep. It can be
 *      executed in a context that does not permit sleeping.
 *      When called as a synchronous function it may sleep. It MUST NOT be
 *      executed in a context that DOES NOT permit sleeping.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes when configured to operate in synchronous mode.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]       dcInstance          Target service instance.
 * @param[in]       pSetupData          Configuration structure for decompression..
 * @param[in]       pSrcBuff            Pointer to data buffer for decompression.
 * @param[in]       pDestBuff           Pointer to buffer space for data
 *                                      after decompression.
 * @param[in]       pOpData             Additional input parameters.
 * @param[in,out]   pResults            Pointer to results structure
 * @param[in]       callbackFn          For synchronous operation this callback
 *                                      shall be a null pointer.
 * @param[in]       callbackTag         User supplied value to help correlate
 *                                      the callback with its associated
 *                                      request.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed.
 * @retval CPA_STATUS_RETRY         Resubmit the request.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_RESOURCE      Error related to system resources.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 * @retval CPA_STATUS_RESTARTING    API implementation is restarting. Resubmit
 *                                  the request.
 *
 * @pre
 *     None
 * @post
 *     None
 * @note
 *     This function passes control to the decompression service. The function
 *     returns the status from the service.
 *
 * @see
 *      cpaDcDecompressData()
 *      cpaDcCompressData2()
 *      cpaDcCompressData()
 *
 *****************************************************************************/
CpaStatus
cpaDcNsDecompressData( CpaInstanceHandle dcInstance,
        CpaDcNsSetupData    *pSetupData,
        CpaBufferList       *pSrcBuff,
        CpaBufferList       *pDestBuff,
        CpaDcOpData         *pOpData,
        CpaDcRqResults      *pResults,
        CpaDcCallbackFn     callbackFn,
        void                *callbackTag );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Generate compression header.
 *
 * @description
 *      This function generates the gzip header, zlib header or LZ4 frame
 *      header and stores it in the destination buffer. The type of header
 *      created is determined using the compression algorithm selected using
 *      CpaDcSessionSetupData.compType, for the session associated with the
 *      session handle.
 *
 * @context
 *      This function may be call from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] pSessionHandle        Session handle.
 * @param[in] pDestBuff             Pointer to data buffer where the
 *                                  compression header will go.
 * @param[out] count                Pointer to counter filled in with
 *                                  header size.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 *
 * @note
 *      When the deflate compression algorithm is used, this function can output
 *      a 10 byte gzip header or 2 byte zlib header to the destination buffer.
 *      The session properties are used to determine the header type. To
 *      output a Gzip or a Zlib header the session must have been initialized
 *      with CpaDcCompType CPA_DC_DEFLATE.
 *      To output a gzip header the session must have been initialized with
 *      CpaDcChecksum CPA_DC_CRC32. To output a zlib header the session must
 *      have been initialized with CpaDcChecksum CPA_DC_ADLER32.
 *      For CpaDcChecksum CPA_DC_NONE no header is output.
 *
 *      If the compression requires a gzip header, then this header requires
 *      at a minimum the following fields, defined in RFC1952:
 *          ID1: 0x1f
 *          ID2: 0x8b
 *          CM: Compression method = 8 for deflate
 *
 *      The zlib header is defined in RFC1950 and this function must implement
 *      as a minimum:
 *          CM: four bit compression method - 8 is deflate with window size to
 *              32k
 *          CINFO: four bit window size (see RFC1950 for details), 7 is 32k
 *              window
 *          FLG: defined as:
 *              -   Bits 0 - 4: check bits for CM, CINFO and FLG (see RFC1950)
 *              -   Bit 5:  FDICT 0 = default, 1 is preset dictionary
 *              -   Bits 6 - 7: FLEVEL, compression level (see RFC 1950)
 *
 *      When LZ4 algorithm is used, this function can output a 7 byte frame
 *      header. This function will set the LZ4 frame header with:
 *          - Magic number 0x184D2204
 *          - The LZ4 max block size defined in the CpaDcSessionSetupData
 *          - Flag byte as:
 *              * Version = 1
 *              * Block independence = 0
 *              * Block checksum = 0
 *              * Content size present = 0
 *              * Content checksum present = 1
 *              * Dictionary ID present = 0
 *          - Content size = 0
 *          - Dictionary ID = 0
 *          - Header checksum = 1 byte representing the second byte of the
 *                              XXH32 of the frame descriptor field.
 *
 *      The counter parameter will be set to the number of bytes added to the
 *      buffer. The pData will be not be changed.
 *
 *      For any of the compression algorithms used, the application is
 *      responsible to offset the pData pointer in CpaBufferList by the length
 *      of the header before calling the CpaDcCompressData() or
 *      CpaDcCompressData2() functions.
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcGenerateHeader( CpaDcSessionHandle pSessionHandle,
    CpaFlatBuffer *pDestBuff, Cpa32U *count );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Generate compression footer.
 *
 * @description
 *      This function generates the footer for gzip, zlib or LZ4.
 *      The generated footer is stored it in the destination buffer.
 *      The type of footer created is determined using the compression
 *      algorithm selected for the session associated with the session handle.
 *
 * @context
 *      This function may be call from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      All session variables are reset
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in,out] pSessionHandle    Session handle.
 * @param[in] pDestBuff             Pointer to data buffer where the
 *                                  compression footer will go.
 * @param[in,out] pResults          Pointer to results structure filled by
 *                                  CpaDcCompressData.  Updated with the
 *                                  results of this API call
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      pSessionHandle has been setup using cpaDcInitSession()
 *      pResults structure has been filled by CpaDcCompressData().
 *
 * @note
 *      Depending on the session variables, this function can add the
 *      alder32 footer to the zlib compressed data as defined in RFC1950.
 *      If required, it can also add the gzip footer, which is the crc32 of the
 *      uncompressed data and the length of the uncompressed data.
 *      This section is defined in RFC1952. The session variables used to
 *      determine the header type are CpaDcCompType and CpaDcChecksum, see
 *      cpaDcGenerateHeader for more details.
 *
 *      For LZ4 compression, this function adds the LZ4 frame footer
 *      using XXH32 algorithm of the uncompressed data. The XXH32 checksum is
 *      added after the end mark. This section is defined in the documentation
 *      of the LZ4 frame format at:
 *      https://github.com/lz4/lz4/blob/dev/doc/lz4_Frame_format.md
 *
 *      An artifact of invoking this function for writing the footer data is
 *      that all opaque session specific data is re-initialized.  If the
 *      compression level and file types are consistent, the upper level
 *      application can continue processing compression requests using the
 *      same session handle.
 *
 *      The produced element of the pResults structure will be incremented by
 *      the numbers bytes added to the buffer.  The pointer to the buffer will
 *      not be modified. It is necessary for the application to ensure that
 *      there is always sufficient memory in the destination buffer to append
 *      the footer. In the event that the destination buffer would be too small
 *      to accept the footer, overflow will not be reported.
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcGenerateFooter( CpaDcSessionHandle pSessionHandle,
    CpaFlatBuffer *pDestBuff,
    CpaDcRqResults *pResults );


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Generate compression header without requiring a session to be created.
 *      This is a No-Session (Ns) variant of the cpaDcGenerateHeader function.
 *
 * @description
 *      This API generates the required compression format header and stores it
 *      in the output buffer.
 *
 * @context
 *      This function may be called from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] pSetupData            Pointer to Ns Configuration structure.
 * @param[in] pDestBuff             Pointer to data buffer where the
 *                                  compression header will go.
 * @param[out] count                Pointer to counter filled in with
 *                                  header size.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 *
 * @note
 *      This function outputs the required compression format header to
 *      the destination buffer. The CpaDcNsSetupData structure fields are used to
 *      determine the header type.
 *
 *      To output an LZ4 header the structure must have been initialized with
 *      with CpaDcCompType CPA_DC_LZ4.
 *      To output a gzip or zlib header the structure must have been initialized
 *      with CpaDcCompType CPA_DC_DEFLATE.
 *      To output a gzip header the structure must have been initialized with
 *      CpaDcChecksum CPA_DC_CRC32.
 *      To output a zlib header the structure must have been initialized with
 *      CpaDcChecksum CPA_DC_ADLER32.
 *      For CpaDcChecksum CPA_DC_NONE no header is output.
 *
 *      The counter parameter will be set to the number of bytes added to the
 *      buffer.
 *
 * @see
 *      cpaDcGenerateHeader
 *
 *****************************************************************************/
CpaStatus
cpaDcNsGenerateHeader( CpaDcNsSetupData *pSetupData,
    CpaFlatBuffer *pDestBuff,
    Cpa32U *count );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Generate compression footer without requiring a session to be created.
 *      This is a No-Session (Ns) variant of the cpaDcGenerateFooter function.
 *
 * @description
 *      This API generates the footer for the required format and stores it in
 *      the destination buffer.
 * @context
 *      This function may be call from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      All session variables are reset
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] pSetupData            Pointer to Ns Configuration structure.
 * @param[in] totalLength           Total accumulated length of input data
 *                                  processed. See description for formats
 *                                  that make use of this parameter.
 * @param[in] pDestBuff             Pointer to data buffer where the
 *                                  compression footer will go.
 * @param[in,out] pResults          Pointer to results structure filled by
 *                                  CpaDcNsCompressData.  Updated with the
 *                                  results of this API call
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      pResults structure has been filled by CpaDcNsCompressData().
 *
 * @note
 *      This function outputs the required compression format footer to
 *      the destination buffer. The CpaDcNsSetupData structure fields are used to
 *      determine the footer type created.
 *
 *      To output an LZ4 footer the structure must have been initialized with
 *      with CpaDcCompType CPA_DC_LZ4.
 *      To output a gzip or zlib footer the structure must have been initialized
 *      with CpaDcCompType CPA_DC_DEFLATE.
 *      To output a gzip footer the structure must have been initialized with
 *      CpaDcChecksum CPA_DC_CRC32 and the totalLength parameter initialized to
 *      the total accumulated length of data processed.
 *      To output a zlib footer the structure must have been initialized with
 *      CpaDcChecksum CPA_DC_ADLER32.
 *      For CpaDcChecksum CPA_DC_NONE no footer is output.
 *
 *      The produced element of the pResults structure will be incremented by the
 *      number of bytes added to the buffer. The pointer to the buffer
 *      will not be modified.
 *
 * @see
 *      CpaDcNsSetupData
 *      cpaDcNsGenerateHeader
 *      cpaDcGenerateFooter
 *
 *****************************************************************************/
CpaStatus
cpaDcNsGenerateFooter( CpaDcNsSetupData *pSetupData,
    Cpa64U totalLength,
    CpaFlatBuffer *pDestBuff,
    CpaDcRqResults *pResults );


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Retrieve statistics
 *
 * @description
 *      This API retrieves the current statistics for a compression instance.
 *
 * @context
 *      This function may be call from any context.
 * @assumptions
 *      None
 * @sideEffects
 *        None
 * @blocking
 *      Yes
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]  dcInstance       Instance handle.
 * @param[out] pStatistics      Pointer to statistics structure.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_RESTARTING     API implementation is restarting. Resubmit
 *                                   the request.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *     None
 *
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcGetStats( CpaInstanceHandle dcInstance,
      CpaDcStats *pStatistics );

/*****************************************************************************/
/* Instance Discovery Functions */

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Get the number of device instances that are supported by the API
 *      implementation.
 *
 * @description
 *
 *     This function will get the number of device instances that are supported
 *     by an implementation of the compression API. This number is then used to
 *     determine the size of the array that must be passed to
 *     cpaDcGetInstances().
 *
 * @context
 *      This function MUST NOT be called from an interrupt context as it MAY
 *      sleep.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[out] pNumInstances        Pointer to where the number of
 *                                   instances will be written.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      This function operates in a synchronous manner and no asynchronous
 *      callback will be generated
 *
 * @see
 *      cpaDcGetInstances
 *
 *****************************************************************************/
CpaStatus
cpaDcGetNumInstances(Cpa16U* pNumInstances);

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Get the handles to the device instances that are supported by the
 *      API implementation.
 *
 * @description
 *
 *      This function will return handles to the device instances that are
 *      supported by an implementation of the compression API. These instance
 *      handles can then be used as input parameters with other compression API
 *      functions.
 *
 *      This function will populate an array that has been allocated by the
 *      caller. The size of this API is determined by the
 *      cpaDcGetNumInstances() function.
 *
 * @context
 *      This function MUST NOT be called from an interrupt context as it MAY
 *      sleep.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]  numInstances     Size of the array.
 * @param[out] dcInstances          Pointer to where the instance
 *                                   handles will be written.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      This function operates in a synchronous manner and no asynchronous
 *      callback will be generated
 *
 * @see
 *      cpaDcGetInstances
 *
 *****************************************************************************/
CpaStatus
cpaDcGetInstances(Cpa16U numInstances,
                        CpaInstanceHandle* dcInstances);

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Component utility function to determine the number of
 *      intermediate buffers required by an implementation.
 *
 * @description
 *      This function will determine the number of intermediate buffer lists
 *      required by an implementation for a compression instance. These buffers
 *      should then be allocated and provided when calling @ref cpaDcStartInstance()
 *      to start a compression instance that will use dynamic compression.
 *
 * @context
 *      This function may sleep, and  MUST NOT be called in interrupt context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 * @param[in,out] instanceHandle        Handle to an instance of this API to be
 *                                      initialized.
 * @param[out]  pNumBuffers             When the function returns, this will
 *                                      specify the number of buffer lists that
 *                                      should be used as intermediate buffers
 *                                      when calling cpaDcStartInstance().
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed. Suggested course of action
 *                                  is to shutdown and restart.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      Note that this is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcStartInstance()
 *
 *****************************************************************************/
CpaStatus
cpaDcGetNumIntermediateBuffers(CpaInstanceHandle instanceHandle,
        Cpa16U *pNumBuffers);

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compression Component Initialization and Start function.
 *
 * @description
 *      This function will initialize and start the compression component.
 *      It MUST be called before any other compress function is called. This
 *      function SHOULD be called only once (either for the very first time,
 *      or after an cpaDcStopInstance call which succeeded) per instance.
 *      Subsequent calls will have no effect.
 *
 *      If required by an implementation, this function can be provided with
 *      instance specific intermediate buffers.  The intent is to provide an
 *      instance specific location to store intermediate results during dynamic
 *      instance Huffman tree compression requests. The memory should be
 *      accessible by the compression engine. The buffers are to support
 *      deflate compression with dynamic Huffman Trees.  Each buffer list
 *      should be similar in size to twice the destination buffer size passed
 *      to the compress API. The number of intermediate buffer lists may vary
 *      between implementations and so @ref cpaDcGetNumIntermediateBuffers()
 *      should be called first to determine the number of intermediate
 *      buffers required by the implementation.
 *
 *      If not required, this parameter can be passed in as NULL.
 *
 * @context
 *      This function may sleep, and  MUST NOT be called in interrupt context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 * @param[in,out] instanceHandle        Handle to an instance of this API to be
 *                                      initialized.
 * @param[in]   numBuffers              Number of buffer lists represented by
 *                                      the pIntermediateBuffers parameter.
 *                                      Note: @ref cpaDcGetNumIntermediateBuffers()
 *                                      can be used to determine the number of
 *                                      intermediate buffers that an implementation
 *                                      requires.
 * @param[in]   pIntermediateBuffers    Optional pointer to Instance specific
 *                                      DRAM buffer.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed. Suggested course of action
 *                                  is to shutdown and restart.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      Note that this is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcStopInstance()
 *      cpaDcGetNumIntermediateBuffers()
 *
 *****************************************************************************/
CpaStatus
cpaDcStartInstance(CpaInstanceHandle instanceHandle,
        Cpa16U numBuffers,
        CpaBufferList **pIntermediateBuffers);

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Compress Component Stop function.
 *
 * @description
 *      This function will stop the Compression component and free
 *      all system resources associated with it. The client MUST ensure that
 *      all outstanding operations have completed before calling this function.
 *      The recommended approach to ensure this is to deregister all session or
 *      callback handles before calling this function. If outstanding
 *      operations still exist when this function is invoked, the callback
 *      function for each of those operations will NOT be invoked and the
 *      shutdown will continue.  If the component is to be restarted, then a
 *      call to cpaDcStartInstance is required.
 *
 * @context
 *      This function may sleep, and so MUST NOT be called in interrupt
 *      context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 * @param[in] instanceHandle        Handle to an instance of this API to be
 *                                  shutdown.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed. Suggested course of action
 *                                  is to ensure requests are not still being
 *                                  submitted and that all sessions are
 *                                  deregistered. If this does not help, then
 *                                  forcefully remove the component from the
 *                                  system.
 * @retval CPA_STATUS_UNSUPPORTED   Function is not supported.
 *
 * @pre
 *      The component has been initialized via cpaDcStartInstance
 * @post
 *      None
 * @note
 *      Note that this is a synchronous function and has no completion callback
 *      associated with it.
 *
 * @see
 *      cpaDcStartInstance()
 *
 *****************************************************************************/
CpaStatus
cpaDcStopInstance(CpaInstanceHandle instanceHandle);


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Function to get information on a particular instance.
 *
 * @description
 *      This function will provide instance specific information through a
 *      @ref CpaInstanceInfo2 structure.
 *
 * @context
 *      This function will be executed in a context that requires that sleeping
 *      MUST NOT be permitted.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      Yes
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]  instanceHandle       Handle to an instance of this API to be
 *                                  initialized.
 * @param[out] pInstanceInfo2       Pointer to the memory location allocated by
 *                                  the client into which the CpaInstanceInfo2
 *                                  structure will be written.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      The client has retrieved an instanceHandle from successive calls to
 *      @ref cpaDcGetNumInstances and @ref cpaDcGetInstances.
 * @post
 *      None
 * @note
 *      None
 * @see
 *      cpaDcGetNumInstances,
 *      cpaDcGetInstances,
 *      CpaInstanceInfo2
 *
 *****************************************************************************/
CpaStatus
cpaDcInstanceGetInfo2(const CpaInstanceHandle instanceHandle,
        CpaInstanceInfo2 * pInstanceInfo2);

/*****************************************************************************/
/* Instance Notification Functions                                           */
/*****************************************************************************/
/**
 *****************************************************************************
  * @ingroup cpaDc
 *      Callback function for instance notification support.
 *
 * @description
 *      This is the prototype for the instance notification callback function.
 *      The callback function is passed in as a parameter to the
 *      @ref cpaDcInstanceSetNotificationCb function.
 *
 * @context
 *      This function will be executed in a context that requires that sleeping
 *      MUST NOT be permitted.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] instanceHandle   Instance handle.
 * @param[in] pCallbackTag     Opaque value provided by user while making
 *                             individual function calls.
 * @param[in] instanceEvent    The event that will trigger this function to
 *                             get invoked.
 *
 * @retval
 *      None
 * @pre
 *      Component has been initialized and the notification function has been
 *  set via the cpaDcInstanceSetNotificationCb function.
 * @post
 *      None
 * @note
 *      None
 * @see
 *      cpaDcInstanceSetNotificationCb(),
 *
 *****************************************************************************/
typedef void (*CpaDcInstanceNotificationCbFunc)(
        const CpaInstanceHandle instanceHandle,
        void * pCallbackTag,
        const CpaInstanceEvent instanceEvent);

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Subscribe for instance notifications.
 *
 * @description
 *      Clients of the CpaDc interface can subscribe for instance notifications
 *      by registering a @ref CpaDcInstanceNotificationCbFunc function.
 *
 * @context
 *      This function may be called from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] instanceHandle           Instance handle.
 * @param[in] pInstanceNotificationCb  Instance notification callback
 *                                     function pointer.
 * @param[in] pCallbackTag             Opaque value provided by user while
 *                                     making individual function calls.
 *
 * @retval CPA_STATUS_SUCCESS          Function executed successfully.
 * @retval CPA_STATUS_FAIL             Function failed.
 * @retval CPA_STATUS_INVALID_PARAM    Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      Instance has been initialized.
 * @post
 *      None
 * @note
 *      None
 * @see
 *      CpaDcInstanceNotificationCbFunc
 *
 *****************************************************************************/
CpaStatus
cpaDcInstanceSetNotificationCb(
        const CpaInstanceHandle instanceHandle,
        const CpaDcInstanceNotificationCbFunc pInstanceNotificationCb,
        void *pCallbackTag);


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Get the size of the memory required to hold the session information.
 *
 * @description
 *
 *      The client of the Data Compression API is responsible for
 *      allocating sufficient memory to hold session information and the context
 *      data. This function provides a means for determining the size of the
 *      session information and the size of the context data.
 *
 * @context
 *      No restrictions
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] dcInstance            Instance handle.
 * @param[in] pSessionData          Pointer to a user instantiated structure
 *                                  containing session data.
 * @param[out] pSessionSize         On return, this parameter will be the size
 *                                  of the memory that will be
 *                                  required by cpaDcInitSession() for session
 *                                  data.
 * @param[out] pContextSize         On return, this parameter will be the size
 *                                  of the memory that will be required
 *                                  for context data.  Context data is
 *                                  save/restore data including history and
 *                                  any implementation specific data that is
 *                                  required for a save/restore operation.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      Only a synchronous version of this function is provided.
 *
 *      It is expected that context data is comprised of the history and
 *      any data stores that are specific to the history such as linked
 *      lists or hash tables.
 *      For stateless sessions the context size returned from this function
 *      will be zero. For stateful sessions the context size returned will
 *      depend on the session setup data and may be zero.
 *
 *      Session data is expected to include interim checksum values, various
 *      counters and other session related data that needs to persist
 *      between invocations.
 *      For a given implementation of this API, it is safe to assume that
 *      cpaDcGetSessionSize() will always return the same session size and
 *      that the size will not be different for different setup data
 *      parameters. However, it should be noted that the size may change:
 *       (1) between different implementations of the API (e.g. between software
 *           and hardware implementations or between different hardware
 *           implementations)
 *       (2) between different releases of the same API implementation.
 *
 * @see
 *      cpaDcInitSession()
 *
 *****************************************************************************/
CpaStatus
cpaDcGetSessionSize(CpaInstanceHandle dcInstance,
        CpaDcSessionSetupData* pSessionData,
        Cpa32U* pSessionSize, Cpa32U* pContextSize );

/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Function to return the size of the memory which must be allocated for
 *      the pPrivateMetaData member of CpaBufferList.
 *
 * @description
 *      This function is used to obtain the size (in bytes) required to allocate
 *      a buffer descriptor for the pPrivateMetaData member in the
 *      CpaBufferList structure.
 *      Should the function return zero then no meta data is required for the
 *      buffer list.
 *
 * @context
 *      This function may be called from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in]  instanceHandle      Handle to an instance of this API.
 * @param[in]  numBuffers          The number of pointers in the CpaBufferList.
 *                                 This is the maximum number of CpaFlatBuffers
 *                                 which may be contained in this CpaBufferList.
 * @param[out] pSizeInBytes        Pointer to the size in bytes of memory to be
 *                                 allocated when the client wishes to allocate
 *                                 a cpaFlatBuffer.
 *
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      None
 * @see
 *      cpaDcGetInstances()
 *
 *****************************************************************************/
CpaStatus
cpaDcBufferListGetMetaSize(const CpaInstanceHandle instanceHandle,
        Cpa32U numBuffers,
        Cpa32U *pSizeInBytes);


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Function to return a string indicating the specific error that occurred
 *      within the system.
 *
 * @description
 *      When a function returns any error including CPA_STATUS_SUCCESS, the
 *      client can invoke this function to get a string which describes the
 *      general error condition, and if available additional information on
 *      the specific error.
 *      The Client MUST allocate CPA_STATUS_MAX_STR_LENGTH_IN_BYTES bytes for  the buffer
 *      string.
 *
 * @context
 *      This function may be called from any context.
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      No
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] dcInstance        Handle to an instance of this API.
 * @param[in] errStatus         The error condition that occurred.
 * @param[in,out] pStatusText   Pointer to the string buffer that will
 *                              be updated with the status text. The invoking
 *                              application MUST allocate this buffer to be
 *                              exactly CPA_STATUS_MAX_STR_LENGTH_IN_BYTES.
 *
 * @retval CPA_STATUS_SUCCESS       Function executed successfully.
 * @retval CPA_STATUS_FAIL          Function failed. Note, in this scenario
 *                                  it is INVALID to call this function a
 *                                  second time.
 * @retval CPA_STATUS_INVALID_PARAM Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @note
 *      None
 * @see
 *      CpaStatus
 *
 *****************************************************************************/

CpaStatus
cpaDcGetStatusText(const CpaInstanceHandle dcInstance,
                   const CpaStatus errStatus,
                   Cpa8S * pStatusText);


/**
 *****************************************************************************
 * @ingroup cpaDc
 *      Set Address Translation function
 *
 * @description
 *      This function is used to set the virtual to physical address
 *      translation routine for the instance. The specified routine
 *      is used by the instance to perform any required translation of
 *      a virtual address to a physical address. If the application
 *      does not invoke this function, then the instance will use its
 *      default method, such as virt2phys, for address translation.
 *
 * @assumptions
 *      None
 * @sideEffects
 *      None
 * @blocking
 *      This function is synchronous and blocking.
 * @reentrant
 *      No
 * @threadSafe
 *      Yes
 *
 * @param[in] instanceHandle         Data Compression API instance handle.
 * @param[in] virtual2Physical       Routine that performs virtual to
 *                                    physical address translation.
 * @retval CPA_STATUS_SUCCESS        Function executed successfully.
 * @retval CPA_STATUS_FAIL           Function failed.
 * @retval CPA_STATUS_INVALID_PARAM  Invalid parameter passed in.
 * @retval CPA_STATUS_UNSUPPORTED    Function is not supported.
 *
 * @pre
 *      None
 * @post
 *      None
 * @see
 *      None
 *
 *****************************************************************************/
CpaStatus
cpaDcSetAddressTranslation(const CpaInstanceHandle instanceHandle,
                           CpaVirtualToPhysical virtual2Physical);
#ifdef __cplusplus
} /* close the extern "C" { */
#endif

#endif /* CPA_DC_H */