1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Media Bus API header 4 * 5 * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de> 6 */ 7 8 #ifndef V4L2_MEDIABUS_H 9 #define V4L2_MEDIABUS_H 10 11 #include <linux/v4l2-mediabus.h> 12 #include <linux/bitops.h> 13 14 /* 15 * How to use the V4L2_MBUS_* flags: 16 * Flags are defined for each of the possible states and values of a media 17 * bus configuration parameter. One and only one bit of each group of flags 18 * shall be set by the users of the v4l2_subdev_pad_ops.get_mbus_config 19 * operation to ensure that no conflicting settings are specified when 20 * reporting the media bus configuration. For example, it is invalid to set or 21 * clear both the V4L2_MBUS_HSYNC_ACTIVE_HIGH and the 22 * V4L2_MBUS_HSYNC_ACTIVE_LOW flag at the same time. Instead either flag 23 * V4L2_MBUS_HSYNC_ACTIVE_HIGH or flag V4L2_MBUS_HSYNC_ACTIVE_LOW shall be set. 24 * 25 * TODO: replace the existing V4L2_MBUS_* flags with structures of fields 26 * to avoid conflicting settings. 27 * 28 * In example: 29 * #define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2) 30 * #define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3) 31 * will be replaced by a field whose value reports the intended active state of 32 * the signal: 33 * unsigned int v4l2_mbus_hsync_active : 1; 34 */ 35 36 /* Parallel flags */ 37 /* 38 * The client runs in master or in slave mode. By "Master mode" an operation 39 * mode is meant, when the client (e.g., a camera sensor) is producing 40 * horizontal and vertical synchronisation. In "Slave mode" the host is 41 * providing these signals to the slave. 42 */ 43 #define V4L2_MBUS_MASTER BIT(0) 44 #define V4L2_MBUS_SLAVE BIT(1) 45 /* 46 * Signal polarity flags 47 * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused 48 * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying 49 * configuration of hardware that uses [HV]REF signals 50 */ 51 #define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2) 52 #define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3) 53 #define V4L2_MBUS_VSYNC_ACTIVE_HIGH BIT(4) 54 #define V4L2_MBUS_VSYNC_ACTIVE_LOW BIT(5) 55 #define V4L2_MBUS_PCLK_SAMPLE_RISING BIT(6) 56 #define V4L2_MBUS_PCLK_SAMPLE_FALLING BIT(7) 57 #define V4L2_MBUS_PCLK_SAMPLE_DUALEDGE BIT(8) 58 #define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(9) 59 #define V4L2_MBUS_DATA_ACTIVE_LOW BIT(10) 60 /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */ 61 #define V4L2_MBUS_FIELD_EVEN_HIGH BIT(11) 62 /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */ 63 #define V4L2_MBUS_FIELD_EVEN_LOW BIT(12) 64 /* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */ 65 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(13) 66 #define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(14) 67 #define V4L2_MBUS_DATA_ENABLE_HIGH BIT(15) 68 #define V4L2_MBUS_DATA_ENABLE_LOW BIT(16) 69 70 /* Serial flags */ 71 /* Clock non-continuous mode support. */ 72 #define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(0) 73 74 #define V4L2_MBUS_CSI2_MAX_DATA_LANES 8 75 76 /** 77 * enum v4l2_mbus_csi2_cphy_line_orders_type - CSI-2 C-PHY line order 78 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ABC: C-PHY line order ABC (default) 79 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ACB: C-PHY line order ACB 80 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BAC: C-PHY line order BAC 81 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BCA: C-PHY line order BCA 82 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CAB: C-PHY line order CAB 83 * @V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CBA: C-PHY line order CBA 84 */ 85 enum v4l2_mbus_csi2_cphy_line_orders_type { 86 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ABC, 87 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_ACB, 88 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BAC, 89 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_BCA, 90 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CAB, 91 V4L2_MBUS_CSI2_CPHY_LINE_ORDER_CBA, 92 }; 93 94 /** 95 * struct v4l2_mbus_config_mipi_csi2 - MIPI CSI-2 data bus configuration 96 * @flags: media bus (V4L2_MBUS_*) flags 97 * @data_lanes: an array of physical data lane indexes 98 * @clock_lane: physical lane index of the clock lane 99 * @num_data_lanes: number of data lanes 100 * @lane_polarities: polarity of the lanes. The order is the same of 101 * the physical lanes. 102 * @line_orders: line order of the data lanes. The order is the same of the 103 * physical lanes. 104 */ 105 struct v4l2_mbus_config_mipi_csi2 { 106 unsigned int flags; 107 unsigned char data_lanes[V4L2_MBUS_CSI2_MAX_DATA_LANES]; 108 unsigned char clock_lane; 109 unsigned char num_data_lanes; 110 bool lane_polarities[1 + V4L2_MBUS_CSI2_MAX_DATA_LANES]; 111 enum v4l2_mbus_csi2_cphy_line_orders_type line_orders[V4L2_MBUS_CSI2_MAX_DATA_LANES]; 112 }; 113 114 /** 115 * struct v4l2_mbus_config_parallel - parallel data bus configuration 116 * @flags: media bus (V4L2_MBUS_*) flags 117 * @bus_width: bus width in bits 118 * @data_shift: data shift in bits 119 */ 120 struct v4l2_mbus_config_parallel { 121 unsigned int flags; 122 unsigned char bus_width; 123 unsigned char data_shift; 124 }; 125 126 /** 127 * struct v4l2_mbus_config_mipi_csi1 - CSI-1/CCP2 data bus configuration 128 * @clock_inv: polarity of clock/strobe signal 129 * false - not inverted, true - inverted 130 * @strobe: false - data/clock, true - data/strobe 131 * @lane_polarity: the polarities of the clock (index 0) and data lanes 132 * index (1) 133 * @data_lane: the number of the data lane 134 * @clock_lane: the number of the clock lane 135 */ 136 struct v4l2_mbus_config_mipi_csi1 { 137 unsigned char clock_inv:1; 138 unsigned char strobe:1; 139 bool lane_polarity[2]; 140 unsigned char data_lane; 141 unsigned char clock_lane; 142 }; 143 144 /** 145 * enum v4l2_mbus_type - media bus type 146 * @V4L2_MBUS_UNKNOWN: unknown bus type, no V4L2 mediabus configuration 147 * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync 148 * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can 149 * also be used for BT.1120 150 * @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface 151 * @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2) 152 * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY 153 * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY 154 * @V4L2_MBUS_DPI: MIPI VIDEO DPI interface 155 * @V4L2_MBUS_INVALID: invalid bus type (keep as last) 156 */ 157 enum v4l2_mbus_type { 158 V4L2_MBUS_UNKNOWN, 159 V4L2_MBUS_PARALLEL, 160 V4L2_MBUS_BT656, 161 V4L2_MBUS_CSI1, 162 V4L2_MBUS_CCP2, 163 V4L2_MBUS_CSI2_DPHY, 164 V4L2_MBUS_CSI2_CPHY, 165 V4L2_MBUS_DPI, 166 V4L2_MBUS_INVALID, 167 }; 168 169 /** 170 * struct v4l2_mbus_config - media bus configuration 171 * @type: interface type 172 * @bus: bus configuration data structure 173 * @bus.parallel: embedded &struct v4l2_mbus_config_parallel. 174 * Used if the bus is parallel or BT.656. 175 * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1. 176 * Used if the bus is MIPI Alliance's Camera Serial 177 * Interface version 1 (MIPI CSI1) or Standard 178 * Mobile Imaging Architecture's Compact Camera Port 2 179 * (SMIA CCP2). 180 * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2. 181 * Used if the bus is MIPI Alliance's Camera Serial 182 * Interface version 2 (MIPI CSI2). 183 */ 184 struct v4l2_mbus_config { 185 enum v4l2_mbus_type type; 186 union { 187 struct v4l2_mbus_config_parallel parallel; 188 struct v4l2_mbus_config_mipi_csi1 mipi_csi1; 189 struct v4l2_mbus_config_mipi_csi2 mipi_csi2; 190 } bus; 191 }; 192 193 /** 194 * v4l2_fill_pix_format - Ancillary routine that fills a &struct 195 * v4l2_pix_format fields from a &struct v4l2_mbus_framefmt. 196 * 197 * @pix_fmt: pointer to &struct v4l2_pix_format to be filled 198 * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model 199 */ 200 static inline void 201 v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, 202 const struct v4l2_mbus_framefmt *mbus_fmt) 203 { 204 pix_fmt->width = mbus_fmt->width; 205 pix_fmt->height = mbus_fmt->height; 206 pix_fmt->field = mbus_fmt->field; 207 pix_fmt->colorspace = mbus_fmt->colorspace; 208 pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; 209 pix_fmt->quantization = mbus_fmt->quantization; 210 pix_fmt->xfer_func = mbus_fmt->xfer_func; 211 } 212 213 /** 214 * v4l2_fill_mbus_format - Ancillary routine that fills a &struct 215 * v4l2_mbus_framefmt from a &struct v4l2_pix_format and a 216 * data format code. 217 * 218 * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled 219 * @pix_fmt: pointer to &struct v4l2_pix_format to be used as model 220 * @code: data format code (from &enum v4l2_mbus_pixelcode) 221 */ 222 static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt, 223 const struct v4l2_pix_format *pix_fmt, 224 u32 code) 225 { 226 mbus_fmt->width = pix_fmt->width; 227 mbus_fmt->height = pix_fmt->height; 228 mbus_fmt->field = pix_fmt->field; 229 mbus_fmt->colorspace = pix_fmt->colorspace; 230 mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc; 231 mbus_fmt->quantization = pix_fmt->quantization; 232 mbus_fmt->xfer_func = pix_fmt->xfer_func; 233 mbus_fmt->code = code; 234 } 235 236 /** 237 * v4l2_fill_pix_format_mplane - Ancillary routine that fills a &struct 238 * v4l2_pix_format_mplane fields from a media bus structure. 239 * 240 * @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled 241 * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model 242 */ 243 static inline void 244 v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt, 245 const struct v4l2_mbus_framefmt *mbus_fmt) 246 { 247 pix_mp_fmt->width = mbus_fmt->width; 248 pix_mp_fmt->height = mbus_fmt->height; 249 pix_mp_fmt->field = mbus_fmt->field; 250 pix_mp_fmt->colorspace = mbus_fmt->colorspace; 251 pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; 252 pix_mp_fmt->quantization = mbus_fmt->quantization; 253 pix_mp_fmt->xfer_func = mbus_fmt->xfer_func; 254 } 255 256 /** 257 * v4l2_fill_mbus_format_mplane - Ancillary routine that fills a &struct 258 * v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane. 259 * 260 * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled 261 * @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be used as model 262 */ 263 static inline void 264 v4l2_fill_mbus_format_mplane(struct v4l2_mbus_framefmt *mbus_fmt, 265 const struct v4l2_pix_format_mplane *pix_mp_fmt) 266 { 267 mbus_fmt->width = pix_mp_fmt->width; 268 mbus_fmt->height = pix_mp_fmt->height; 269 mbus_fmt->field = pix_mp_fmt->field; 270 mbus_fmt->colorspace = pix_mp_fmt->colorspace; 271 mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc; 272 mbus_fmt->quantization = pix_mp_fmt->quantization; 273 mbus_fmt->xfer_func = pix_mp_fmt->xfer_func; 274 } 275 276 #endif 277