1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
23 */
24
25
26 /*
27 * USBA: Solaris USB Architecture support
28 *
29 * all functions exposed to client drivers have prefix usb_ while all USBA
30 * internal functions or functions exposed to HCD or hubd only have prefix
31 * usba_
32 *
33 * this file contains initializations, logging/tracing support and PM
34 * support
35 */
36 #define USBA_FRAMEWORK
37 #include <sys/varargs.h>
38 #include <sys/strsun.h>
39 #include <sys/usb/usba/usba_impl.h>
40 #include <sys/usb/usba/hcdi_impl.h>
41 #include <sys/usb/usba/usba10.h>
42
43 /*
44 * print buffer protected by mutex for debug stuff. the mutex also
45 * ensures serializing debug messages
46 */
47 static kmutex_t usba_print_mutex;
48 static char usba_print_buf[USBA_PRINT_BUF_LEN];
49 kmutex_t usbai_mutex;
50
51 /*
52 * debug stuff
53 */
54 usb_log_handle_t usbai_log_handle;
55 uint_t usbai_errlevel = USB_LOG_L4;
56 uint_t usbai_errmask = (uint_t)-1;
57
58 #define USBA_DEBUG_SIZE_EXTRA_ALLOC 8
59 #ifdef DEBUG
60 #define USBA_DEBUG_BUF_SIZE \
61 (0x40000 - USBA_DEBUG_SIZE_EXTRA_ALLOC)
62 #else
63 #define USBA_DEBUG_BUF_SIZE \
64 (0x4000 - USBA_DEBUG_SIZE_EXTRA_ALLOC)
65 #endif /* DEBUG */
66
67 #define USBA_POWER_STR_SIZE 40
68
69 int usba_suppress_dprintf; /* Suppress debug printing */
70 int usba_clear_debug_buf_flag; /* clear debug buf */
71 int usba_buffer_dprintf = 1; /* Use a debug print buffer */
72 int usba_timestamp_dprintf = 0; /* get time stamps in trace */
73 int usba_debug_buf_size = USBA_DEBUG_BUF_SIZE; /* Size of debug buf */
74 int usba_debug_chatty; /* L1 msg on console */
75
76 static char *usba_debug_buf = NULL; /* The debug buf */
77 static char *usba_buf_sptr, *usba_buf_eptr;
78 static hrtime_t usba_last_timestamp; /* last time stamp in trace */
79
80 /* USBA framework initializations */
81 void
usba_usbai_initialization()82 usba_usbai_initialization()
83 {
84 usbai_log_handle = usb_alloc_log_hdl(NULL, "usbai", &usbai_errlevel,
85 &usbai_errmask, NULL, 0);
86
87 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
88 "usba_usbai_initialization");
89
90 mutex_init(&usba_print_mutex, NULL, MUTEX_DRIVER, NULL);
91 mutex_init(&usbai_mutex, NULL, MUTEX_DRIVER, NULL);
92 }
93
94
95 /* USBA framework destroys */
96 void
usba_usbai_destroy()97 usba_usbai_destroy()
98 {
99 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
100 "usba_usbai_destroy");
101
102 mutex_destroy(&usba_print_mutex);
103 mutex_destroy(&usbai_mutex);
104 if (usba_debug_buf) {
105 kmem_free(usba_debug_buf,
106 usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC);
107 }
108
109 usb_free_log_hdl(usbai_log_handle);
110 }
111
112
113 /*
114 * debug, log, and console message handling
115 */
116 usb_log_handle_t
usb_alloc_log_hdl(dev_info_t * dip,char * name,uint_t * errlevel,uint_t * mask,uint_t * instance_filter,usb_flags_t flags)117 usb_alloc_log_hdl(dev_info_t *dip, char *name,
118 uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
119 usb_flags_t flags)
120 {
121 usba_log_handle_impl_t *hdl;
122
123 USBA_CHECK_CONTEXT();
124 hdl = kmem_zalloc(sizeof (*hdl), KM_SLEEP);
125
126 hdl->lh_dip = dip;
127 if (dip && (name == NULL)) {
128 hdl->lh_name = (char *)ddi_driver_name(dip);
129 } else {
130 hdl->lh_name = name;
131 }
132 hdl->lh_errlevel = errlevel;
133 hdl->lh_mask = mask;
134 hdl->lh_instance_filter = instance_filter;
135 hdl->lh_flags = flags;
136
137 #ifdef __lock_lint
138 (void) usb_alloc_log_handle(dip, name, errlevel, mask,
139 instance_filter, 0, flags);
140 usb_free_log_handle(NULL);
141 #endif
142
143 return ((usb_log_handle_t)hdl);
144 }
145
146
147 /*ARGSUSED*/
148 usb_log_handle_t
usb_alloc_log_handle(dev_info_t * dip,char * name,uint_t * errlevel,uint_t * mask,uint_t * instance_filter,uint_t reserved,usb_flags_t flags)149 usb_alloc_log_handle(dev_info_t *dip, char *name,
150 uint_t *errlevel, uint_t *mask, uint_t *instance_filter,
151 uint_t reserved, usb_flags_t flags)
152 {
153 return (usb_alloc_log_hdl(dip, name, errlevel, mask,
154 instance_filter, flags));
155 }
156
157 void
usb_free_log_handle(usb_log_handle_t handle)158 usb_free_log_handle(usb_log_handle_t handle)
159 {
160 if (handle) {
161 kmem_free(handle, sizeof (usba_log_handle_impl_t));
162 }
163 }
164
165 void
usb_free_log_hdl(usb_log_handle_t handle)166 usb_free_log_hdl(usb_log_handle_t handle)
167 {
168 if (handle) {
169 kmem_free(handle, sizeof (usba_log_handle_impl_t));
170 }
171 }
172
173
174 static void
usba_clear_dprint_buf()175 usba_clear_dprint_buf()
176 {
177 if (usba_debug_buf) {
178 usba_buf_sptr = usba_debug_buf;
179 usba_buf_eptr = usba_debug_buf + usba_debug_buf_size;
180 bzero(usba_debug_buf, usba_debug_buf_size +
181 USBA_DEBUG_SIZE_EXTRA_ALLOC);
182 }
183 }
184
185
186 #ifdef DEBUG
187 char *
usba_dbuf_tail(uint_t lines)188 usba_dbuf_tail(uint_t lines)
189 {
190 int count;
191 char *r = NULL;
192
193 mutex_enter(&usba_print_mutex);
194 if (usba_debug_buf) {
195 count = 0;
196 r = usba_buf_sptr;
197 while ((count < lines) && (r > usba_debug_buf)) {
198 if (*r == '\n') {
199 count++;
200 }
201 r--;
202 }
203 }
204 mutex_exit(&usba_print_mutex);
205
206 return (r);
207 }
208 #endif /* DEBUG */
209
210
211 static void usb_vprintf(dev_info_t *, int, char *, char *, va_list)
212 __KVPRINTFLIKE(4);
213
214 static void
usb_vprintf(dev_info_t * dip,int level,char * label,char * fmt,va_list ap)215 usb_vprintf(dev_info_t *dip, int level, char *label, char *fmt, va_list ap)
216 {
217 size_t len;
218 int instance;
219 char driver_name[USBA_DRVNAME_LEN];
220 char *msg_ptr;
221
222 if (usba_suppress_dprintf) {
223
224 return;
225 }
226
227 *driver_name = '\0';
228 mutex_enter(&usba_print_mutex);
229
230 /*
231 * Check if we have a valid buf size?
232 * Suppress logging to usb_buffer if so.
233 */
234 if (usba_debug_buf_size <= 0) {
235
236 usba_buffer_dprintf = 0;
237 }
238
239 /*
240 * if there is label and dip, use <driver name><instance>:
241 * otherwise just use the label
242 */
243 if (dip) {
244 instance = ddi_get_instance(dip);
245 (void) snprintf(driver_name, USBA_DRVNAME_LEN,
246 "%s%d", ddi_driver_name(dip), instance);
247 }
248
249 if (label == (char *)NULL) {
250 len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN, "\t");
251 } else if (usba_timestamp_dprintf) {
252 hrtime_t t = gethrtime();
253 hrtime_t elapsed = (t - usba_last_timestamp)/1000;
254 usba_last_timestamp = t;
255
256 if (dip) {
257
258 len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
259 "+%lld->%p: %s%d: ", elapsed,
260 (void *)curthread, label, instance);
261 } else {
262 len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
263 "+%lld->%p: %s: ", elapsed,
264 (void *)curthread, label);
265 }
266 } else {
267 if (dip) {
268 len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
269 "%s%d:\t", label, instance);
270 } else {
271 len = snprintf(usba_print_buf, USBA_PRINT_BUF_LEN,
272 "%s:\t", label);
273 }
274 }
275
276
277 msg_ptr = usba_print_buf + len;
278 (void) vsnprintf(msg_ptr, USBA_PRINT_BUF_LEN - len - 2, fmt, ap);
279
280 len = min(strlen(usba_print_buf), USBA_PRINT_BUF_LEN - 2);
281 usba_print_buf[len++] = '\n';
282 usba_print_buf[len] = '\0';
283
284 /*
285 * stuff the message in the debug buf
286 */
287 if (usba_buffer_dprintf) {
288 if (usba_debug_buf == NULL) {
289 usba_debug_buf = kmem_alloc(
290 usba_debug_buf_size + USBA_DEBUG_SIZE_EXTRA_ALLOC,
291 KM_SLEEP);
292 usba_clear_dprint_buf();
293 } else if (usba_clear_debug_buf_flag) {
294 usba_clear_dprint_buf();
295 usba_clear_debug_buf_flag = 0;
296 }
297
298 /*
299 * overwrite >>>> that might be over the end of the
300 * the buffer
301 */
302 *(usba_debug_buf + usba_debug_buf_size) = '\0';
303
304 if ((usba_buf_sptr + len) > usba_buf_eptr) {
305 size_t left = _PTRDIFF(usba_buf_eptr, usba_buf_sptr);
306
307 bcopy(usba_print_buf, usba_buf_sptr, left);
308 bcopy((caddr_t)usba_print_buf + left,
309 usba_debug_buf, len - left);
310 usba_buf_sptr = usba_debug_buf + len - left;
311 } else {
312 bcopy(usba_print_buf, usba_buf_sptr, len);
313 usba_buf_sptr += len;
314 }
315 /* add marker */
316 (void) sprintf(usba_buf_sptr, ">>>>");
317 }
318
319 /*
320 * L4-L2 message may go to the log buf if not logged in usba_debug_buf
321 * L1 messages will go to the log buf in non-debug kernels and
322 * to console and log buf in debug kernels if usba_debug_chatty
323 * has been set
324 * L0 messages are warnings and will go to console and log buf and
325 * include the pathname, if available
326 */
327
328 switch (level) {
329 case USB_LOG_L4:
330 case USB_LOG_L3:
331 case USB_LOG_L2:
332 if (!usba_buffer_dprintf) {
333 cmn_err(CE_CONT, "^%s", usba_print_buf);
334 }
335 break;
336 case USB_LOG_L1:
337 if (dip) {
338 char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
339 if (pathname) {
340 cmn_err(CE_CONT,
341 usba_debug_chatty ?
342 "%s (%s): %s" : "?%s (%s): %s",
343 ddi_pathname(dip, pathname),
344 driver_name, msg_ptr);
345 kmem_free(pathname, MAXPATHLEN);
346 } else {
347 cmn_err(CE_CONT,
348 usba_debug_chatty ?
349 "%s" : "?%s", usba_print_buf);
350 }
351 } else {
352 cmn_err(CE_CONT,
353 usba_debug_chatty ? "%s" : "?%s",
354 usba_print_buf);
355 }
356 break;
357 case USB_LOG_L0:
358 /* Strip the "\n" added earlier */
359 if (usba_print_buf[len - 1] == '\n') {
360 usba_print_buf[len - 1] = '\0';
361 }
362 if (msg_ptr[len - 1] == '\n') {
363 msg_ptr[len - 1] = '\0';
364 }
365 if (dip) {
366 char *pathname = kmem_alloc(MAXPATHLEN, KM_NOSLEEP);
367 if (pathname) {
368 cmn_err(CE_WARN, "%s (%s): %s",
369 ddi_pathname(dip, pathname),
370 driver_name, msg_ptr);
371 kmem_free(pathname, MAXPATHLEN);
372 } else {
373 cmn_err(CE_WARN, usba_print_buf);
374 }
375 } else {
376 cmn_err(CE_WARN, usba_print_buf);
377 }
378 break;
379 }
380
381 mutex_exit(&usba_print_mutex);
382 }
383
384 int
385 usba_vlog(usb_log_handle_t, uint_t, uint_t, char *, va_list)
386 __KVPRINTFLIKE(4);
387
388 /* When usba10_calls.c goes away, this function can be made static again. */
389 int
usba_vlog(usb_log_handle_t handle,uint_t level,uint_t mask,char * fmt,va_list ap)390 usba_vlog(usb_log_handle_t handle, uint_t level, uint_t mask,
391 char *fmt, va_list ap)
392 {
393 usba_log_handle_impl_t *hdl = (usba_log_handle_impl_t *)handle;
394 char *label;
395 uint_t hdl_errlevel, hdl_mask, hdl_instance_filter;
396
397 /* if there is no handle, use usba as label */
398 if (hdl == NULL) {
399 usb_vprintf(NULL, level, "usba", fmt, ap);
400
401 return (USB_SUCCESS);
402 }
403
404 /* look up the filters and set defaults */
405 if (hdl->lh_errlevel) {
406 hdl_errlevel = *(hdl->lh_errlevel);
407 } else {
408 hdl_errlevel = 0;
409 }
410
411 if (hdl->lh_mask) {
412 hdl_mask = *(hdl->lh_mask);
413 } else {
414 hdl_mask = (uint_t)-1;
415 }
416
417 if (hdl->lh_instance_filter) {
418 hdl_instance_filter = *(hdl->lh_instance_filter);
419 } else {
420 hdl_instance_filter = (uint_t)-1;
421 }
422
423 /* if threshold is lower or mask doesn't match, we are done */
424 if ((level > hdl_errlevel) || ((mask & hdl_mask) == 0)) {
425
426 return (USB_FAILURE);
427 }
428
429 /*
430 * if we have a dip, and it is not a warning, check
431 * the instance number
432 */
433 if (hdl->lh_dip && (level > USB_LOG_L0)) {
434 if ((hdl_instance_filter != (uint_t)-1) &&
435 (ddi_get_instance(hdl->lh_dip) != hdl_instance_filter)) {
436
437 return (USB_FAILURE);
438 }
439 }
440
441 label = hdl->lh_name;
442
443 usb_vprintf(hdl->lh_dip, level, label, fmt, ap);
444
445 return (USB_SUCCESS);
446 }
447
448
449 void
usb_dprintf4(uint_t mask,usb_log_handle_t handle,char * fmt,...)450 usb_dprintf4(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
451 {
452 va_list ap;
453
454 va_start(ap, fmt);
455 (void) usba_vlog(handle, USB_LOG_L4, mask, fmt, ap);
456 va_end(ap);
457 }
458
459
460 void
usb_dprintf3(uint_t mask,usb_log_handle_t handle,char * fmt,...)461 usb_dprintf3(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
462 {
463 va_list ap;
464
465 va_start(ap, fmt);
466 (void) usba_vlog(handle, USB_LOG_L3, mask, fmt, ap);
467 va_end(ap);
468 }
469
470
471 void
usb_dprintf2(uint_t mask,usb_log_handle_t handle,char * fmt,...)472 usb_dprintf2(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
473 {
474 va_list ap;
475
476 va_start(ap, fmt);
477 (void) usba_vlog(handle, USB_LOG_L2, mask, fmt, ap);
478 va_end(ap);
479 }
480
481
482 void
usb_dprintf1(uint_t mask,usb_log_handle_t handle,char * fmt,...)483 usb_dprintf1(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
484 {
485 va_list ap;
486
487 va_start(ap, fmt);
488 (void) usba_vlog(handle, USB_LOG_L1, mask, fmt, ap);
489 va_end(ap);
490 }
491
492
493 void
usb_dprintf0(uint_t mask,usb_log_handle_t handle,char * fmt,...)494 usb_dprintf0(uint_t mask, usb_log_handle_t handle, char *fmt, ...)
495 {
496 va_list ap;
497
498 va_start(ap, fmt);
499 (void) usba_vlog(handle, USB_LOG_L0, mask, fmt, ap);
500 va_end(ap);
501 }
502
503
504 int
usb_log(usb_log_handle_t handle,uint_t level,uint_t mask,char * fmt,...)505 usb_log(usb_log_handle_t handle, uint_t level, uint_t mask, char *fmt, ...)
506 {
507 va_list ap;
508 int rval;
509
510 va_start(ap, fmt);
511 rval = usba_vlog(handle, level, mask, fmt, ap);
512 va_end(ap);
513
514 return (rval);
515 }
516
517
518 /*
519 * Provide a default configuration power descriptor
520 */
521 usba_cfg_pwr_descr_t default_cfg_power = {
522 18, /* bLength */
523 USBA_DESCR_TYPE_CFG_PWR_1_1, /* bDescriptorType */
524 0, /* SelfPowerConsumedD0_l */
525 0, /* SelfPowerConsumedD0_h */
526 0, /* bPowerSummaryId */
527 0, /* bBusPowerSavingD1 */
528 0, /* bSelfPowerSavingD1 */
529 0, /* bBusPowerSavingD2 */
530 0, /* bSelfPowerSavingD2 */
531 100, /* bBusPowerSavingD3 */
532 100, /* bSelfPowerSavingD3 */
533 0, /* TransitionTimeFromD1 */
534 0, /* TransitionTimeFromD2 */
535 10, /* TransitionTimeFromD3 1 Second */
536 };
537
538
539 /*
540 * Provide a default interface power descriptor
541 */
542 usba_if_pwr_descr_t default_if_power = {
543 15, /* bLength */
544 USBA_DESCR_TYPE_IF_PWR_1_1, /* bDescriptorType */
545 8, /* bmCapabilitiesFlags */
546 0, /* bBusPowerSavingD1 */
547 0, /* bSelfPowerSavingD1 */
548 0, /* bBusPowerSavingD2 */
549 0, /* bSelfPowerSavingD2 */
550 100, /* bBusPowerSavingD3 */
551 100, /* bSelfPowerSavingD3 */
552 0, /* TransitionTimeFromD1 */
553 0, /* TransitionTimeFromD2 */
554 10, /* TransitionTimeFromD3 1 Second */
555 };
556
557
558 static void
usba_async_req_raise_power(void * arg)559 usba_async_req_raise_power(void *arg)
560 {
561 usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
562 int rval;
563
564 /*
565 * To eliminate race condition between the call to power entry
566 * point and our call to raise power level, we first mark the
567 * component busy and later idle
568 */
569 (void) pm_busy_component(pmrq->dip, pmrq->comp);
570 rval = pm_raise_power(pmrq->dip, pmrq->comp, pmrq->level);
571 (void) pm_idle_component(pmrq->dip, pmrq->comp);
572 pmrq->cb(pmrq->arg, rval);
573
574 /* We are done with pmrq. Free it now */
575 kmem_free(pmrq, sizeof (usba_pm_req_t));
576 }
577
578
579 /* usb function to perform async pm_request_power_change */
580 int
usb_req_raise_power(dev_info_t * dip,int comp,int level,void (* callback)(void *,int),void * arg,usb_flags_t flags)581 usb_req_raise_power(dev_info_t *dip, int comp, int level,
582 void (*callback)(void *, int), void *arg, usb_flags_t flags)
583 {
584 usba_pm_req_t *pmrq;
585
586 if (flags & USB_FLAGS_SLEEP) {
587
588 return (pm_raise_power(dip, comp, level));
589 }
590
591 if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
592 NULL) {
593
594 return (USB_FAILURE);
595 }
596
597 pmrq->dip = dip;
598 pmrq->comp = comp;
599 pmrq->level = level;
600 pmrq->cb = callback;
601 pmrq->arg = arg;
602 pmrq->flags = flags;
603
604 if (usb_async_req(dip, usba_async_req_raise_power,
605 (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
606 USB_SUCCESS) {
607 kmem_free(pmrq, sizeof (usba_pm_req_t));
608
609 return (USB_FAILURE);
610 }
611
612 return (USB_SUCCESS);
613 }
614
615
616 static void
usba_async_req_lower_power(void * arg)617 usba_async_req_lower_power(void *arg)
618 {
619 usba_pm_req_t *pmrq = (usba_pm_req_t *)arg;
620 int rval;
621
622 /*
623 * To eliminate race condition between the call to power entry
624 * point and our call to lower power level, we call idle component
625 * to push ahead the PM timestamp
626 */
627 (void) pm_idle_component(pmrq->dip, pmrq->comp);
628 rval = pm_lower_power(pmrq->dip, pmrq->comp, pmrq->level);
629 pmrq->cb(pmrq->arg, rval);
630 }
631
632
633 /* usb function to perform async pm_request_power_change */
634 int
usb_req_lower_power(dev_info_t * dip,int comp,int level,void (* callback)(void *,int),void * arg,usb_flags_t flags)635 usb_req_lower_power(dev_info_t *dip, int comp, int level,
636 void (*callback)(void *, int), void *arg, usb_flags_t flags)
637 {
638 usba_pm_req_t *pmrq;
639
640 if (flags & USB_FLAGS_SLEEP) {
641
642 return (pm_lower_power(dip, comp, level));
643 }
644
645 if ((pmrq = kmem_alloc(sizeof (usba_pm_req_t), KM_NOSLEEP)) ==
646 NULL) {
647
648 return (USB_FAILURE);
649 }
650
651 pmrq->dip = dip;
652 pmrq->comp = comp;
653 pmrq->level = level;
654 pmrq->cb = callback;
655 pmrq->arg = arg;
656 pmrq->flags = flags;
657
658 if (usb_async_req(dip, usba_async_req_lower_power,
659 (void *)pmrq, USB_FLAGS_NOSLEEP | USB_FLAGS_NOQUEUE) !=
660 USB_SUCCESS) {
661 kmem_free(pmrq, sizeof (usba_pm_req_t));
662
663 return (USB_FAILURE);
664 }
665
666 return (USB_SUCCESS);
667 }
668
669
670 /* function to see if pm is enabled for this device */
671 /*ARGSUSED*/
672 int
usb_is_pm_enabled(dev_info_t * dip)673 usb_is_pm_enabled(dev_info_t *dip)
674 {
675 /*
676 * At this point we should assume that all devices
677 * are capable of supporting PM
678 */
679 return (USB_SUCCESS);
680 }
681
682
683 /*
684 * usba_handle_device_remote_wakeup:
685 * internal function to enable/disable remote wakeup in the device
686 * or interface
687 */
688 static int
usba_handle_device_remote_wakeup(dev_info_t * dip,int cmd)689 usba_handle_device_remote_wakeup(dev_info_t *dip, int cmd)
690 {
691 int rval;
692 uint8_t bmRequest = USB_DEV_REQ_HOST_TO_DEV;
693 uchar_t bRequest;
694 uint16_t wIndex = 0;
695 usb_cr_t completion_reason = 0;
696 usb_cb_flags_t cb_flags;
697 usb_pipe_handle_t ph;
698
699 USB_DPRINTF_L4(DPRINT_MASK_USBA, usbai_log_handle,
700 "usba_handle_device_remote_wakeup: dip = 0x%p", (void *)dip);
701
702 USBA_CHECK_CONTEXT();
703
704 /* get the default pipe */
705 ph = usba_get_dflt_pipe_handle(dip);
706
707 /* do we own the device? */
708 if (usb_owns_device(dip)) {
709 bmRequest |= USB_DEV_REQ_RCPT_DEV;
710 } else {
711 bmRequest |= USB_DEV_REQ_RCPT_IF;
712 wIndex = usba_get_ifno(dip);
713 }
714 bRequest = ((cmd == USB_REMOTE_WAKEUP_ENABLE) ? USB_REQ_SET_FEATURE :
715 USB_REQ_CLEAR_FEATURE);
716
717 if ((rval = usb_pipe_sync_ctrl_xfer(dip, ph,
718 bmRequest, /* bmRequest */
719 bRequest, /* bRequest */
720 USB_DEV_REMOTE_WAKEUP, /* wValue */
721 wIndex, /* wIndex */
722 0, /* wLength */
723 NULL, 0,
724 &completion_reason,
725 &cb_flags, USB_FLAGS_SLEEP)) != USB_SUCCESS) {
726 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
727 "Set/ClearFeature (RemoteWakep) failed: "
728 "rval = %d, cmd = %d, cr = 0x%x cb = 0x%x",
729 rval, cmd, completion_reason, cb_flags);
730 }
731
732 return (rval);
733 }
734
735
736 void
usb_enable_parent_notification(dev_info_t * dip)737 usb_enable_parent_notification(dev_info_t *dip)
738 {
739 USBA_CHECK_CONTEXT();
740 (void) ndi_prop_create_boolean(DDI_DEV_T_NONE, dip,
741 "pm-want-child-notification?");
742 }
743
744
745 /*
746 * usb_handle_remote_wakeup:
747 * check if device supports remote wakeup and, if so, enable/disable
748 * remote wake up in the device depending upon the command
749 */
750 int
usb_handle_remote_wakeup(dev_info_t * dip,int cmd)751 usb_handle_remote_wakeup(dev_info_t *dip, int cmd)
752 {
753 usb_cfg_descr_t cfg_descr;
754 uchar_t *usb_cfg; /* buf for config descriptor */
755 size_t cfg_length;
756 int rval;
757
758 USBA_CHECK_CONTEXT();
759
760 /* Obtain the raw configuration descriptor */
761 usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
762
763 /* get configuration descriptor, must succeed */
764 rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
765 &cfg_descr, USB_CFG_DESCR_SIZE);
766 ASSERT(rval == USB_CFG_DESCR_SIZE);
767
768 /*
769 * If the device supports remote wakeup, and PM is enabled,
770 * we enable remote wakeup in the device
771 */
772 if ((usb_is_pm_enabled(dip) == USB_SUCCESS) &&
773 (cfg_descr.bmAttributes & USB_CFG_ATTR_REMOTE_WAKEUP)) {
774
775 rval = usba_handle_device_remote_wakeup(dip, cmd);
776 } else {
777 rval = USB_FAILURE;
778 }
779
780 return (rval);
781 }
782
783
784 /*
785 * usb_create_pm_components:
786 * map descriptor into pm properties
787 */
788 int
usb_create_pm_components(dev_info_t * dip,uint_t * pwr_states)789 usb_create_pm_components(dev_info_t *dip, uint_t *pwr_states)
790 {
791 uchar_t *usb_cfg; /* buf for config descriptor */
792 usb_cfg_descr_t cfg_descr;
793 size_t cfg_length;
794 usba_cfg_pwr_descr_t confpwr_descr;
795 usba_if_pwr_descr_t ifpwr_descr;
796 uint8_t cfg_attrib;
797 int i, lvl, rval;
798 int n_prop = 0;
799 uint8_t *ptr;
800 char *drvname;
801 char str[USBA_POWER_STR_SIZE];
802 char *pm_comp[USBA_N_PMCOMP];
803
804 USBA_CHECK_CONTEXT();
805
806 if (usb_is_pm_enabled(dip) != USB_SUCCESS) {
807
808 return (USB_FAILURE);
809 }
810
811 /* Obtain the raw configuration descriptor */
812 usb_cfg = usb_get_raw_cfg_data(dip, &cfg_length);
813
814 /* get configuration descriptor, must succceed */
815 rval = usb_parse_cfg_descr(usb_cfg, cfg_length,
816 &cfg_descr, USB_CFG_DESCR_SIZE);
817 ASSERT(rval == USB_CFG_DESCR_SIZE);
818
819 cfg_attrib = cfg_descr.bmAttributes;
820 *pwr_states = 0;
821
822 /*
823 * Now start creating the pm-components strings
824 */
825 drvname = (char *)ddi_driver_name(dip);
826 (void) snprintf(str, USBA_POWER_STR_SIZE, "NAME= %s%d Power",
827 drvname, ddi_get_instance(dip));
828
829 pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1, KM_SLEEP);
830 (void) strcpy(pm_comp[n_prop++], str);
831
832 /*
833 * if the device is bus powered we look at the bBusPowerSavingDx
834 * fields else we look at bSelfPowerSavingDx fields.
835 * OS and USB power states are numerically reversed,
836 *
837 * Here is the mapping :-
838 * OS State USB State
839 * 0 D3 (minimal or no power)
840 * 1 D2
841 * 2 D1
842 * 3 D0 (Full power)
843 *
844 * if we own the whole device, we look at the config pwr descr
845 * else at the interface pwr descr.
846 */
847 if (usb_owns_device(dip)) {
848 /* Parse the configuration power descriptor */
849 rval = usba_parse_cfg_pwr_descr(usb_cfg, cfg_length,
850 &confpwr_descr, USBA_CFG_PWR_DESCR_SIZE);
851
852 if (rval != USBA_CFG_PWR_DESCR_SIZE) {
853 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
854 "usb_create_pm_components: "
855 "usb_parse_cfg_pwr_descr returns length of %d, "
856 "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
857
858 return (USB_FAILURE);
859 }
860
861 if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
862 ptr = &confpwr_descr.bSelfPowerSavingD3;
863 } else {
864 ptr = &confpwr_descr.bBusPowerSavingD3;
865 }
866 } else {
867 /* Parse the interface power descriptor */
868 rval = usba_parse_if_pwr_descr(usb_cfg,
869 cfg_length,
870 usba_get_ifno(dip), /* interface index */
871 0, /* XXXX alt interface index */
872 &ifpwr_descr,
873 USBA_IF_PWR_DESCR_SIZE);
874
875 if (rval != USBA_IF_PWR_DESCR_SIZE) {
876 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
877 "usb_create_pm_components: "
878 "usb_parse_if_pwr_descr "
879 "returns length of %d, "
880 "expecting %d", rval, USBA_CFG_PWR_DESCR_SIZE);
881
882 return (USB_FAILURE);
883 }
884
885 if (cfg_attrib & USB_CFG_ATTR_SELFPWR) {
886 ptr = &ifpwr_descr.bSelfPowerSavingD3;
887 } else {
888 ptr = &ifpwr_descr.bBusPowerSavingD3;
889 }
890 }
891
892 /* walk thru levels and create prop level=name strings */
893 for (lvl = USB_DEV_OS_PWR_0; lvl <= USB_DEV_OS_PWR_3; lvl++) {
894 if (*ptr || (lvl == USB_DEV_OS_PWR_3)) {
895 (void) snprintf(str, USBA_POWER_STR_SIZE,
896 "%d=USB D%d State",
897 lvl, USB_DEV_OS_PWR2USB_PWR(lvl));
898 pm_comp[n_prop] = kmem_zalloc(strlen(str) + 1,
899 KM_SLEEP);
900 (void) strcpy(pm_comp[n_prop++], str);
901
902 *pwr_states |= USB_DEV_PWRMASK(lvl);
903 }
904
905 ptr -= 2; /* skip to the next power state */
906 }
907
908 USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
909 "usb_create_pm_components: pwr_states: %x", *pwr_states);
910
911 /* now create the actual components */
912 rval = ddi_prop_update_string_array(DDI_DEV_T_NONE, dip,
913 "pm-components", pm_comp, n_prop);
914 if (rval == DDI_PROP_SUCCESS) {
915 rval = USB_SUCCESS;
916 } else {
917 rval = USB_FAILURE;
918 }
919
920 /* display & delete properties */
921 USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
922 "usb_create_pm_components: The properties are:");
923 for (i = 0; i < n_prop; i++) {
924 USB_DPRINTF_L3(DPRINT_MASK_USBAI, usbai_log_handle,
925 "\t%s", pm_comp[i]);
926 kmem_free(pm_comp[i], strlen(pm_comp[i]) + 1);
927 }
928
929 return (rval);
930 }
931
932
933 /*
934 * Generic Functions to set the power level of any usb device
935 *
936 * Since OS and USB power states are numerically reverse,
937 * Here is the mapping :-
938 * OS State USB State
939 * 0 D3 (minimal or no power)
940 * 1 D2
941 * 2 D1
942 * 3 D0 (Full power)
943 */
944
945 /* set device power level to 0 (full power) */
946 /*ARGSUSED*/
947 int
usb_set_device_pwrlvl0(dev_info_t * dip)948 usb_set_device_pwrlvl0(dev_info_t *dip)
949 {
950 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
951 "usb_set_device_pwrlvl0 : Not Yet Implemented");
952
953 return (USB_SUCCESS);
954 }
955
956
957 /* set device power level to 1 */
958 /*ARGSUSED*/
959 int
usb_set_device_pwrlvl1(dev_info_t * dip)960 usb_set_device_pwrlvl1(dev_info_t *dip)
961 {
962 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
963 "usb_set_device_pwrlvl1 : Not Yet Implemented");
964
965 return (USB_SUCCESS);
966 }
967
968
969 /* set device power level to 2 */
970 /*ARGSUSED*/
971 int
usb_set_device_pwrlvl2(dev_info_t * dip)972 usb_set_device_pwrlvl2(dev_info_t *dip)
973 {
974 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
975 "usb_set_device_pwrlvl2 : Not Yet Implemented");
976
977 return (USB_SUCCESS);
978 }
979
980
981 /* set device power level to 3 */
982 /*ARGSUSED*/
983 int
usb_set_device_pwrlvl3(dev_info_t * dip)984 usb_set_device_pwrlvl3(dev_info_t *dip)
985 {
986 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
987 "usb_set_device_pwrlvl3 : Not Yet Implemented");
988
989 return (USB_SUCCESS);
990 }
991
992
993 /*
994 * USB event management
995 */
996 typedef void (*peh_t)(dev_info_t *, ddi_eventcookie_t, void *, void *);
997
998
999 /*
1000 * usb_register_hotplug_cbs:
1001 * Register to get callbacks for hotplug events
1002 */
1003 /*ARGSUSED*/
1004 int
usb_register_hotplug_cbs(dev_info_t * dip,int (* disconnect_event_handler)(dev_info_t *),int (* reconnect_event_handler)(dev_info_t *))1005 usb_register_hotplug_cbs(dev_info_t *dip,
1006 int (*disconnect_event_handler)(dev_info_t *),
1007 int (*reconnect_event_handler)(dev_info_t *))
1008 {
1009 usba_device_t *usba_device;
1010 usba_evdata_t *evdata;
1011
1012 if ((dip == NULL) || (disconnect_event_handler == NULL) ||
1013 (reconnect_event_handler == NULL)) {
1014 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1015 "usb_register_hotplug_cbs: Bad argument(s)");
1016
1017 return (USB_FAILURE);
1018 }
1019
1020 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1021 "usb_register_hotplug_cbs: entry");
1022
1023 /*
1024 * The event list searches by ddi_get_eventcookie calls below, go
1025 * through hubd and so do not apply to host controllers.
1026 */
1027 ASSERT(!usba_is_root_hub(dip));
1028
1029 usba_device = usba_get_usba_device(dip);
1030 evdata = usba_get_evdata(dip);
1031
1032 if (usba_device->rm_cookie == NULL) {
1033 if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1034 &usba_device->rm_cookie) != DDI_SUCCESS) {
1035 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1036 "usb_register_hotplug_cbs: get rm cookie failed");
1037
1038 goto fail;
1039 }
1040 }
1041 if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1042 (peh_t)disconnect_event_handler,
1043 NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1044 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1045 "usb_register_hotplug_cbs: add disconnect handler failed");
1046
1047 goto fail;
1048 }
1049
1050 if (usba_device->ins_cookie == NULL) {
1051 if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1052 &usba_device->ins_cookie) != DDI_SUCCESS) {
1053 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1054 "usb_register_hotplug_cbs: get ins cookie failed");
1055
1056 goto fail;
1057 }
1058 }
1059 if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1060 (peh_t)reconnect_event_handler,
1061 NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1062 USB_DPRINTF_L2(DPRINT_MASK_USBAI, usbai_log_handle,
1063 "usb_register_hotplug_cbs: add reconnect handler failed");
1064
1065 goto fail;
1066 }
1067
1068 mutex_enter(&usba_device->usb_mutex);
1069 usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1070 USBA_CLIENT_FLAG_EV_CBS;
1071 usba_device->usb_client_ev_cb_list->dip = dip;
1072 mutex_exit(&usba_device->usb_mutex);
1073
1074 return (USB_SUCCESS);
1075
1076 fail:
1077 usb_unregister_hotplug_cbs(dip);
1078
1079 return (USB_FAILURE);
1080
1081 }
1082
1083
1084 /*
1085 * usb_unregister_hotplug_cbs:
1086 * Unregister hotplug callbacks
1087 */
1088 /*ARGSUSED*/
1089 void
usb_unregister_hotplug_cbs(dev_info_t * dip)1090 usb_unregister_hotplug_cbs(dev_info_t *dip)
1091 {
1092 usb_unregister_event_cbs(dip, NULL);
1093 }
1094
1095
1096 /*
1097 * usb_register_event_cbs:
1098 * Register to get callbacks for USB events
1099 */
1100 /*ARGSUSED*/
1101 int
usb_register_event_cbs(dev_info_t * dip,usb_event_t * usb_evdata,usb_flags_t flags)1102 usb_register_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata,
1103 usb_flags_t flags)
1104 {
1105 usba_device_t *usba_device;
1106 usba_evdata_t *evdata;
1107
1108 if ((dip == NULL) || (usb_evdata == NULL)) {
1109
1110 return (USB_FAILURE);
1111 }
1112
1113 /*
1114 * The event list searches by ddi_get_eventcookie calls below, go
1115 * through hubd and so do not apply to host controllers.
1116 */
1117 ASSERT(!usba_is_root_hub(dip));
1118
1119 usba_device = usba_get_usba_device(dip);
1120 evdata = usba_get_evdata(dip);
1121
1122 if (usb_evdata->disconnect_event_handler != NULL) {
1123 if (usba_device->rm_cookie == NULL) {
1124 if (ddi_get_eventcookie(dip, DDI_DEVI_REMOVE_EVENT,
1125 &usba_device->rm_cookie) != DDI_SUCCESS) {
1126
1127 goto fail;
1128 }
1129 }
1130 if (ddi_add_event_handler(dip, usba_device->rm_cookie,
1131 (peh_t)usb_evdata->disconnect_event_handler,
1132 NULL, &evdata->ev_rm_cb_id) != DDI_SUCCESS) {
1133
1134 goto fail;
1135 }
1136 }
1137 if (usb_evdata->reconnect_event_handler != NULL) {
1138 if (usba_device->ins_cookie == NULL) {
1139 if (ddi_get_eventcookie(dip, DDI_DEVI_INSERT_EVENT,
1140 &usba_device->ins_cookie) != DDI_SUCCESS) {
1141
1142 goto fail;
1143 }
1144 }
1145 if (ddi_add_event_handler(dip, usba_device->ins_cookie,
1146 (peh_t)usb_evdata->reconnect_event_handler,
1147 NULL, &evdata->ev_ins_cb_id) != DDI_SUCCESS) {
1148
1149 goto fail;
1150 }
1151 }
1152 if (usb_evdata->post_resume_event_handler != NULL) {
1153 if (usba_device->resume_cookie == NULL) {
1154 if (ddi_get_eventcookie(dip, USBA_POST_RESUME_EVENT,
1155 &usba_device->resume_cookie) != DDI_SUCCESS) {
1156
1157 goto fail;
1158 }
1159 }
1160 if (ddi_add_event_handler(dip, usba_device->resume_cookie,
1161 (peh_t)usb_evdata->post_resume_event_handler,
1162 NULL, &evdata->ev_resume_cb_id) != DDI_SUCCESS) {
1163
1164 goto fail;
1165 }
1166 }
1167 if (usb_evdata->pre_suspend_event_handler != NULL) {
1168 if (usba_device->suspend_cookie == NULL) {
1169 if (ddi_get_eventcookie(dip, USBA_PRE_SUSPEND_EVENT,
1170 &usba_device->suspend_cookie) != DDI_SUCCESS) {
1171
1172 goto fail;
1173 }
1174 }
1175 if (ddi_add_event_handler(dip, usba_device->suspend_cookie,
1176 (peh_t)usb_evdata->pre_suspend_event_handler,
1177 NULL, &evdata->ev_suspend_cb_id) != DDI_SUCCESS) {
1178
1179 goto fail;
1180 }
1181 }
1182
1183 mutex_enter(&usba_device->usb_mutex);
1184 usba_device->usb_client_flags[usba_get_ifno(dip)] |=
1185 USBA_CLIENT_FLAG_EV_CBS;
1186 usba_device->usb_client_ev_cb_list->dip = dip;
1187 usba_device->usb_client_ev_cb_list->ev_data = usb_evdata;
1188 mutex_exit(&usba_device->usb_mutex);
1189
1190 return (USB_SUCCESS);
1191
1192 fail:
1193 usb_unregister_event_cbs(dip, usb_evdata);
1194
1195 return (USB_FAILURE);
1196
1197 }
1198
1199
1200 /*
1201 * usb_unregister_event_cbs:
1202 * Unregister all event callbacks
1203 */
1204 /*ARGSUSED*/
1205 void
usb_unregister_event_cbs(dev_info_t * dip,usb_event_t * usb_evdata)1206 usb_unregister_event_cbs(dev_info_t *dip, usb_event_t *usb_evdata)
1207 {
1208 usba_evdata_t *evdata;
1209 usba_device_t *usba_device = usba_get_usba_device(dip);
1210
1211 evdata = usba_get_evdata(dip);
1212
1213 if (evdata->ev_rm_cb_id != NULL) {
1214 (void) ddi_remove_event_handler(evdata->ev_rm_cb_id);
1215 evdata->ev_rm_cb_id = NULL;
1216 }
1217
1218 if (evdata->ev_ins_cb_id != NULL) {
1219 (void) ddi_remove_event_handler(evdata->ev_ins_cb_id);
1220 evdata->ev_ins_cb_id = NULL;
1221 }
1222
1223 if (evdata->ev_suspend_cb_id != NULL) {
1224 (void) ddi_remove_event_handler(evdata->ev_suspend_cb_id);
1225 evdata->ev_suspend_cb_id = NULL;
1226 }
1227
1228 if (evdata->ev_resume_cb_id != NULL) {
1229 (void) ddi_remove_event_handler(evdata->ev_resume_cb_id);
1230 evdata->ev_resume_cb_id = NULL;
1231 }
1232
1233 mutex_enter(&usba_device->usb_mutex);
1234 usba_device->usb_client_flags[usba_get_ifno(dip)] &=
1235 ~USBA_CLIENT_FLAG_EV_CBS;
1236 mutex_exit(&usba_device->usb_mutex);
1237 }
1238
1239 int
usb_reset_device(dev_info_t * dip,usb_dev_reset_lvl_t reset_level)1240 usb_reset_device(dev_info_t *dip, usb_dev_reset_lvl_t reset_level)
1241 {
1242 return (usba_hubdi_reset_device(dip, reset_level));
1243 }
1244
1245 /*
1246 * usb device driver registration
1247 */
1248 int
usb_register_dev_driver(dev_info_t * dip,usb_dev_driver_callback_t cb)1249 usb_register_dev_driver(dev_info_t *dip, usb_dev_driver_callback_t cb)
1250 {
1251 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1252 "usb_register_dev_driver: register the specified driver "
1253 "in usba: dip = 0x%p", (void *)dip);
1254
1255 if (cb != NULL) {
1256 usb_cap.dip = dip;
1257 usb_cap.usba_dev_driver_cb = cb;
1258
1259 return (USB_SUCCESS);
1260 }
1261
1262 return (USB_FAILURE);
1263 }
1264
1265 /*
1266 * usb device driver unregistration
1267 */
1268 void
usb_unregister_dev_driver(dev_info_t * dip)1269 usb_unregister_dev_driver(dev_info_t *dip)
1270 {
1271 USB_DPRINTF_L4(DPRINT_MASK_USBAI, usbai_log_handle,
1272 "usb_unregister_dev_driver: unregister the registered "
1273 "driver: dip =0x%p", (void *)dip);
1274
1275 ASSERT(dip == usb_cap.dip);
1276 usb_cap.dip = NULL;
1277 usb_cap.usba_dev_driver_cb = NULL;
1278 }
1279