1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Scarlett Driver for ALSA
4 *
5 * Copyright (c) 2013 by Tobias Hoffmann
6 * Copyright (c) 2013 by Robin Gareus <robin at gareus.org>
7 * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de>
8 * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com>
9 *
10 * Many codes borrowed from audio.c by
11 * Alan Cox (alan at lxorguk.ukuu.org.uk)
12 * Thomas Sailer (sailer at ife.ee.ethz.ch)
13 *
14 * Code cleanup:
15 * David Henningsson <david.henningsson at canonical.com>
16 */
17
18 /*
19 * Rewritten and extended to support more models, e.g. Scarlett 18i8.
20 *
21 * Auto-detection via UAC2 is not feasible to properly discover the vast
22 * majority of features. It's related to both Linux/ALSA's UAC2 as well as
23 * Focusrite's implementation of it. Eventually quirks may be sufficient but
24 * right now it's a major headache to work around these things.
25 *
26 * NB. Neither the OSX nor the win driver provided by Focusrite performs
27 * discovery, they seem to operate the same as this driver.
28 */
29
30 /* Mixer Interface for the Focusrite Scarlett 18i6 audio interface.
31 *
32 * The protocol was reverse engineered by looking at communication between
33 * Scarlett MixControl (v 1.2.128.0) and the Focusrite(R) Scarlett 18i6
34 * (firmware v305) using wireshark and usbmon in January 2013.
35 * Extended in July 2013.
36 *
37 * this mixer gives complete access to all features of the device:
38 * - change Impedance of inputs (Line-in, Mic / Instrument, Hi-Z)
39 * - select clock source
40 * - dynamic input to mixer-matrix assignment
41 * - 18 x 6 mixer-matrix gain stages
42 * - bus routing & volume control
43 * - automatic re-initialization on connect if device was power-cycled
44 *
45 * USB URB commands overview (bRequest = 0x01 = UAC2_CS_CUR)
46 * wIndex
47 * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 +
48 * channel, data=Line/Inst (2bytes)
49 * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes)
50 * ?? wValue=0x0803/04, ?? (2bytes)
51 * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes)
52 * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes)
53 * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte)
54 * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes)
55 * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes)
56 * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes)
57 * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes)
58 * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes)
59 * ?? [sometimes](4bytes, e.g 0x000003be 0x000003bf ...03ff)
60 *
61 * USB reads: (i.e. actually issued by original software)
62 * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!)
63 * 0x29 wValue=0x0100 sample-rate(4bytes)
64 * wValue=0x0200 ?? 1byte (only once)
65 * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ??
66 *
67 * USB reads with bRequest = 0x03 = UAC2_CS_MEM
68 * 0x3c wValue=0x0002 1byte: sync status (locked=1)
69 * wValue=0x0000 18*2byte: peak meter (inputs)
70 * wValue=0x0001 8(?)*2byte: peak meter (mix)
71 * wValue=0x0003 6*2byte: peak meter (pcm/daw)
72 *
73 * USB write with bRequest = 0x03
74 * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5
75 *
76 *
77 * <ditaa>
78 * /--------------\ 18chn 6chn /--------------\
79 * | Hardware in +--+-------\ /------+--+ ALSA PCM out |
80 * \--------------/ | | | | \--------------/
81 * | | | |
82 * | v v |
83 * | +---------------+ |
84 * | \ Matrix Mux / |
85 * | +-----+-----+ |
86 * | | |
87 * | | 18chn |
88 * | v |
89 * | +-----------+ |
90 * | | Mixer | |
91 * | | Matrix | |
92 * | | | |
93 * | | 18x6 Gain | |
94 * | | stages | |
95 * | +-----+-----+ |
96 * | | |
97 * | | |
98 * | 18chn | 6chn | 6chn
99 * v v v
100 * =========================
101 * +---------------+ +--—------------+
102 * \ Output Mux / \ Capture Mux /
103 * +-----+-----+ +-----+-----+
104 * | |
105 * | 6chn |
106 * v |
107 * +-------------+ |
108 * | Master Gain | |
109 * +------+------+ |
110 * | |
111 * | 6chn | 18chn
112 * | (3 stereo pairs) |
113 * /--------------\ | | /--------------\
114 * | Hardware out |<--/ \-->| ALSA PCM in |
115 * \--------------/ \--------------/
116 * </ditaa>
117 *
118 */
119
120 #include <linux/slab.h>
121 #include <linux/usb.h>
122 #include <linux/usb/audio-v2.h>
123
124 #include <sound/core.h>
125 #include <sound/control.h>
126 #include <sound/tlv.h>
127
128 #include "usbaudio.h"
129 #include "mixer.h"
130 #include "helper.h"
131 #include "power.h"
132
133 #include "mixer_scarlett.h"
134
135 /* some gui mixers can't handle negative ctl values */
136 #define SND_SCARLETT_LEVEL_BIAS 128
137 #define SND_SCARLETT_MATRIX_IN_MAX 18
138 #define SND_SCARLETT_CONTROLS_MAX 10
139 #define SND_SCARLETT_OFFSETS_MAX 5
140
141 enum {
142 SCARLETT_OUTPUTS,
143 SCARLETT_SWITCH_IMPEDANCE,
144 SCARLETT_SWITCH_PAD,
145 SCARLETT_SWITCH_GAIN,
146 };
147
148 enum {
149 SCARLETT_OFFSET_PCM = 0,
150 SCARLETT_OFFSET_ANALOG = 1,
151 SCARLETT_OFFSET_SPDIF = 2,
152 SCARLETT_OFFSET_ADAT = 3,
153 SCARLETT_OFFSET_MIX = 4,
154 };
155
156 struct scarlett_mixer_elem_enum_info {
157 int start;
158 int len;
159 int offsets[SND_SCARLETT_OFFSETS_MAX];
160 char const * const *names;
161 };
162
163 struct scarlett_mixer_control {
164 unsigned char num;
165 unsigned char type;
166 const char *name;
167 };
168
169 struct scarlett_device_info {
170 int matrix_in;
171 int matrix_out;
172 int input_len;
173 int output_len;
174
175 struct scarlett_mixer_elem_enum_info opt_master;
176 struct scarlett_mixer_elem_enum_info opt_matrix;
177
178 /* initial values for matrix mux */
179 int matrix_mux_init[SND_SCARLETT_MATRIX_IN_MAX];
180
181 int num_controls; /* number of items in controls */
182 const struct scarlett_mixer_control controls[SND_SCARLETT_CONTROLS_MAX];
183 };
184
185 /********************** Enum Strings *************************/
186
187 static const struct scarlett_mixer_elem_enum_info opt_pad = {
188 .start = 0,
189 .len = 2,
190 .offsets = {},
191 .names = (char const * const []){
192 "0dB", "-10dB"
193 }
194 };
195
196 static const struct scarlett_mixer_elem_enum_info opt_gain = {
197 .start = 0,
198 .len = 2,
199 .offsets = {},
200 .names = (char const * const []){
201 "Lo", "Hi"
202 }
203 };
204
205 static const struct scarlett_mixer_elem_enum_info opt_impedance = {
206 .start = 0,
207 .len = 2,
208 .offsets = {},
209 .names = (char const * const []){
210 "Line", "Hi-Z"
211 }
212 };
213
214 static const struct scarlett_mixer_elem_enum_info opt_clock = {
215 .start = 1,
216 .len = 3,
217 .offsets = {},
218 .names = (char const * const []){
219 "Internal", "SPDIF", "ADAT"
220 }
221 };
222
223 static const struct scarlett_mixer_elem_enum_info opt_sync = {
224 .start = 0,
225 .len = 2,
226 .offsets = {},
227 .names = (char const * const []){
228 "No Lock", "Locked"
229 }
230 };
231
scarlett_ctl_switch_info(struct snd_kcontrol * kctl,struct snd_ctl_elem_info * uinfo)232 static int scarlett_ctl_switch_info(struct snd_kcontrol *kctl,
233 struct snd_ctl_elem_info *uinfo)
234 {
235 struct usb_mixer_elem_info *elem = kctl->private_data;
236
237 uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
238 uinfo->count = elem->channels;
239 uinfo->value.integer.min = 0;
240 uinfo->value.integer.max = 1;
241 return 0;
242 }
243
scarlett_ctl_switch_get(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)244 static int scarlett_ctl_switch_get(struct snd_kcontrol *kctl,
245 struct snd_ctl_elem_value *ucontrol)
246 {
247 struct usb_mixer_elem_info *elem = kctl->private_data;
248 int i, err, val;
249
250 for (i = 0; i < elem->channels; i++) {
251 err = snd_usb_get_cur_mix_value(elem, i, i, &val);
252 if (err < 0)
253 return err;
254
255 val = !val; /* invert mute logic for mixer */
256 ucontrol->value.integer.value[i] = val;
257 }
258
259 return 0;
260 }
261
scarlett_ctl_switch_put(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)262 static int scarlett_ctl_switch_put(struct snd_kcontrol *kctl,
263 struct snd_ctl_elem_value *ucontrol)
264 {
265 struct usb_mixer_elem_info *elem = kctl->private_data;
266 int i, changed = 0;
267 int err, oval, val;
268
269 for (i = 0; i < elem->channels; i++) {
270 err = snd_usb_get_cur_mix_value(elem, i, i, &oval);
271 if (err < 0)
272 return err;
273
274 val = ucontrol->value.integer.value[i];
275 val = !val;
276 if (oval != val) {
277 err = snd_usb_set_cur_mix_value(elem, i, i, val);
278 if (err < 0)
279 return err;
280
281 changed = 1;
282 }
283 }
284
285 return changed;
286 }
287
scarlett_ctl_resume(struct usb_mixer_elem_list * list)288 static int scarlett_ctl_resume(struct usb_mixer_elem_list *list)
289 {
290 struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list);
291 int i;
292
293 for (i = 0; i < elem->channels; i++)
294 if (elem->cached & (1 << i))
295 snd_usb_set_cur_mix_value(elem, i, i,
296 elem->cache_val[i]);
297 return 0;
298 }
299
scarlett_ctl_info(struct snd_kcontrol * kctl,struct snd_ctl_elem_info * uinfo)300 static int scarlett_ctl_info(struct snd_kcontrol *kctl,
301 struct snd_ctl_elem_info *uinfo)
302 {
303 struct usb_mixer_elem_info *elem = kctl->private_data;
304
305 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
306 uinfo->count = elem->channels;
307 uinfo->value.integer.min = 0;
308 uinfo->value.integer.max = (int)kctl->private_value +
309 SND_SCARLETT_LEVEL_BIAS;
310 uinfo->value.integer.step = 1;
311 return 0;
312 }
313
scarlett_ctl_get(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)314 static int scarlett_ctl_get(struct snd_kcontrol *kctl,
315 struct snd_ctl_elem_value *ucontrol)
316 {
317 struct usb_mixer_elem_info *elem = kctl->private_data;
318 int i, err, val;
319
320 for (i = 0; i < elem->channels; i++) {
321 err = snd_usb_get_cur_mix_value(elem, i, i, &val);
322 if (err < 0)
323 return err;
324
325 val = clamp(val / 256, -128, (int)kctl->private_value) +
326 SND_SCARLETT_LEVEL_BIAS;
327 ucontrol->value.integer.value[i] = val;
328 }
329
330 return 0;
331 }
332
scarlett_ctl_put(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)333 static int scarlett_ctl_put(struct snd_kcontrol *kctl,
334 struct snd_ctl_elem_value *ucontrol)
335 {
336 struct usb_mixer_elem_info *elem = kctl->private_data;
337 int i, changed = 0;
338 int err, oval, val;
339
340 for (i = 0; i < elem->channels; i++) {
341 err = snd_usb_get_cur_mix_value(elem, i, i, &oval);
342 if (err < 0)
343 return err;
344
345 val = ucontrol->value.integer.value[i] -
346 SND_SCARLETT_LEVEL_BIAS;
347 val = val * 256;
348 if (oval != val) {
349 err = snd_usb_set_cur_mix_value(elem, i, i, val);
350 if (err < 0)
351 return err;
352
353 changed = 1;
354 }
355 }
356
357 return changed;
358 }
359
scarlett_generate_name(int i,char * dst,int offsets[])360 static void scarlett_generate_name(int i, char *dst, int offsets[])
361 {
362 if (i > offsets[SCARLETT_OFFSET_MIX])
363 sprintf(dst, "Mix %c",
364 'A'+(i - offsets[SCARLETT_OFFSET_MIX] - 1));
365 else if (i > offsets[SCARLETT_OFFSET_ADAT])
366 sprintf(dst, "ADAT %d", i - offsets[SCARLETT_OFFSET_ADAT]);
367 else if (i > offsets[SCARLETT_OFFSET_SPDIF])
368 sprintf(dst, "SPDIF %d", i - offsets[SCARLETT_OFFSET_SPDIF]);
369 else if (i > offsets[SCARLETT_OFFSET_ANALOG])
370 sprintf(dst, "Analog %d", i - offsets[SCARLETT_OFFSET_ANALOG]);
371 else if (i > offsets[SCARLETT_OFFSET_PCM])
372 sprintf(dst, "PCM %d", i - offsets[SCARLETT_OFFSET_PCM]);
373 else
374 sprintf(dst, "Off");
375 }
376
scarlett_ctl_enum_dynamic_info(struct snd_kcontrol * kctl,struct snd_ctl_elem_info * uinfo)377 static int scarlett_ctl_enum_dynamic_info(struct snd_kcontrol *kctl,
378 struct snd_ctl_elem_info *uinfo)
379 {
380 struct usb_mixer_elem_info *elem = kctl->private_data;
381 struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
382 unsigned int items = opt->len;
383
384 uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
385 uinfo->count = elem->channels;
386 uinfo->value.enumerated.items = items;
387
388 if (uinfo->value.enumerated.item >= items)
389 uinfo->value.enumerated.item = items - 1;
390
391 /* generate name dynamically based on item number and offset info */
392 scarlett_generate_name(uinfo->value.enumerated.item,
393 uinfo->value.enumerated.name,
394 opt->offsets);
395
396 return 0;
397 }
398
scarlett_ctl_enum_info(struct snd_kcontrol * kctl,struct snd_ctl_elem_info * uinfo)399 static int scarlett_ctl_enum_info(struct snd_kcontrol *kctl,
400 struct snd_ctl_elem_info *uinfo)
401 {
402 struct usb_mixer_elem_info *elem = kctl->private_data;
403 struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
404
405 return snd_ctl_enum_info(uinfo, elem->channels, opt->len,
406 (const char * const *)opt->names);
407 }
408
scarlett_ctl_enum_get(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)409 static int scarlett_ctl_enum_get(struct snd_kcontrol *kctl,
410 struct snd_ctl_elem_value *ucontrol)
411 {
412 struct usb_mixer_elem_info *elem = kctl->private_data;
413 struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
414 int err, val;
415
416 err = snd_usb_get_cur_mix_value(elem, 0, 0, &val);
417 if (err < 0)
418 return err;
419
420 val = clamp(val - opt->start, 0, opt->len-1);
421
422 ucontrol->value.enumerated.item[0] = val;
423
424 return 0;
425 }
426
scarlett_ctl_enum_put(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)427 static int scarlett_ctl_enum_put(struct snd_kcontrol *kctl,
428 struct snd_ctl_elem_value *ucontrol)
429 {
430 struct usb_mixer_elem_info *elem = kctl->private_data;
431 struct scarlett_mixer_elem_enum_info *opt = elem->private_data;
432 int err, oval, val;
433
434 err = snd_usb_get_cur_mix_value(elem, 0, 0, &oval);
435 if (err < 0)
436 return err;
437
438 val = ucontrol->value.integer.value[0];
439 val = val + opt->start;
440 if (val != oval) {
441 snd_usb_set_cur_mix_value(elem, 0, 0, val);
442 return 1;
443 }
444 return 0;
445 }
446
scarlett_ctl_enum_resume(struct usb_mixer_elem_list * list)447 static int scarlett_ctl_enum_resume(struct usb_mixer_elem_list *list)
448 {
449 struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list);
450
451 if (elem->cached)
452 snd_usb_set_cur_mix_value(elem, 0, 0, *elem->cache_val);
453 return 0;
454 }
455
scarlett_ctl_meter_get(struct snd_kcontrol * kctl,struct snd_ctl_elem_value * ucontrol)456 static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl,
457 struct snd_ctl_elem_value *ucontrol)
458 {
459 struct usb_mixer_elem_info *elem = kctl->private_data;
460 struct snd_usb_audio *chip = elem->head.mixer->chip;
461 unsigned char buf[2 * MAX_CHANNELS] = {0, };
462 int wValue = (elem->control << 8) | elem->idx_off;
463 int idx = snd_usb_ctrl_intf(elem->head.mixer->hostif) | (elem->head.id << 8);
464 int err;
465
466 err = snd_usb_ctl_msg(chip->dev,
467 usb_rcvctrlpipe(chip->dev, 0),
468 UAC2_CS_MEM,
469 USB_RECIP_INTERFACE | USB_TYPE_CLASS |
470 USB_DIR_IN, wValue, idx, buf, elem->channels);
471 if (err < 0)
472 return err;
473
474 ucontrol->value.enumerated.item[0] = clamp((int)buf[0], 0, 1);
475 return 0;
476 }
477
478 static const struct snd_kcontrol_new usb_scarlett_ctl_switch = {
479 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
480 .name = "",
481 .info = scarlett_ctl_switch_info,
482 .get = scarlett_ctl_switch_get,
483 .put = scarlett_ctl_switch_put,
484 };
485
486 static const DECLARE_TLV_DB_SCALE(db_scale_scarlett_gain, -12800, 100, 0);
487
488 static const struct snd_kcontrol_new usb_scarlett_ctl = {
489 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
490 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
491 SNDRV_CTL_ELEM_ACCESS_TLV_READ,
492 .name = "",
493 .info = scarlett_ctl_info,
494 .get = scarlett_ctl_get,
495 .put = scarlett_ctl_put,
496 .private_value = 6, /* max value */
497 .tlv = { .p = db_scale_scarlett_gain }
498 };
499
500 static const struct snd_kcontrol_new usb_scarlett_ctl_master = {
501 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
502 .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
503 SNDRV_CTL_ELEM_ACCESS_TLV_READ,
504 .name = "",
505 .info = scarlett_ctl_info,
506 .get = scarlett_ctl_get,
507 .put = scarlett_ctl_put,
508 .private_value = 6, /* max value */
509 .tlv = { .p = db_scale_scarlett_gain }
510 };
511
512 static const struct snd_kcontrol_new usb_scarlett_ctl_enum = {
513 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
514 .name = "",
515 .info = scarlett_ctl_enum_info,
516 .get = scarlett_ctl_enum_get,
517 .put = scarlett_ctl_enum_put,
518 };
519
520 static const struct snd_kcontrol_new usb_scarlett_ctl_dynamic_enum = {
521 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
522 .name = "",
523 .info = scarlett_ctl_enum_dynamic_info,
524 .get = scarlett_ctl_enum_get,
525 .put = scarlett_ctl_enum_put,
526 };
527
528 static const struct snd_kcontrol_new usb_scarlett_ctl_sync = {
529 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
530 .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
531 .name = "",
532 .info = scarlett_ctl_enum_info,
533 .get = scarlett_ctl_meter_get,
534 };
535
add_new_ctl(struct usb_mixer_interface * mixer,const struct snd_kcontrol_new * ncontrol,usb_mixer_elem_resume_func_t resume,int index,int offset,int num,int val_type,int channels,const char * name,const struct scarlett_mixer_elem_enum_info * opt,struct usb_mixer_elem_info ** elem_ret)536 static int add_new_ctl(struct usb_mixer_interface *mixer,
537 const struct snd_kcontrol_new *ncontrol,
538 usb_mixer_elem_resume_func_t resume,
539 int index, int offset, int num,
540 int val_type, int channels, const char *name,
541 const struct scarlett_mixer_elem_enum_info *opt,
542 struct usb_mixer_elem_info **elem_ret
543 )
544 {
545 struct snd_kcontrol *kctl;
546 struct usb_mixer_elem_info *elem;
547 int err;
548
549 elem = kzalloc(sizeof(*elem), GFP_KERNEL);
550 if (!elem)
551 return -ENOMEM;
552
553 elem->head.mixer = mixer;
554 elem->head.resume = resume;
555 elem->control = offset;
556 elem->idx_off = num;
557 elem->head.id = index;
558 elem->val_type = val_type;
559
560 elem->channels = channels;
561
562 /* add scarlett_mixer_elem_enum_info struct */
563 elem->private_data = (void *)opt;
564
565 kctl = snd_ctl_new1(ncontrol, elem);
566 if (!kctl) {
567 kfree(elem);
568 return -ENOMEM;
569 }
570 kctl->private_free = snd_usb_mixer_elem_free;
571
572 strscpy(kctl->id.name, name, sizeof(kctl->id.name));
573
574 err = snd_usb_mixer_add_control(&elem->head, kctl);
575 if (err < 0)
576 return err;
577
578 if (elem_ret)
579 *elem_ret = elem;
580
581 return 0;
582 }
583
add_output_ctls(struct usb_mixer_interface * mixer,int index,const char * name,const struct scarlett_device_info * info)584 static int add_output_ctls(struct usb_mixer_interface *mixer,
585 int index, const char *name,
586 const struct scarlett_device_info *info)
587 {
588 int err;
589 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
590 struct usb_mixer_elem_info *elem;
591
592 /* Add mute switch */
593 snprintf(mx, sizeof(mx), "Master %d (%s) Playback Switch",
594 index + 1, name);
595 err = add_new_ctl(mixer, &usb_scarlett_ctl_switch,
596 scarlett_ctl_resume, 0x0a, 0x01,
597 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem);
598 if (err < 0)
599 return err;
600
601 /* Add volume control and initialize to 0 */
602 snprintf(mx, sizeof(mx), "Master %d (%s) Playback Volume",
603 index + 1, name);
604 err = add_new_ctl(mixer, &usb_scarlett_ctl_master,
605 scarlett_ctl_resume, 0x0a, 0x02,
606 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem);
607 if (err < 0)
608 return err;
609
610 /* Add L channel source playback enumeration */
611 snprintf(mx, sizeof(mx), "Master %dL (%s) Source Playback Enum",
612 index + 1, name);
613 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum,
614 scarlett_ctl_enum_resume, 0x33, 0x00,
615 2*index, USB_MIXER_S16, 1, mx, &info->opt_master,
616 &elem);
617 if (err < 0)
618 return err;
619
620 /* Add R channel source playback enumeration */
621 snprintf(mx, sizeof(mx), "Master %dR (%s) Source Playback Enum",
622 index + 1, name);
623 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum,
624 scarlett_ctl_enum_resume, 0x33, 0x00,
625 2*index+1, USB_MIXER_S16, 1, mx, &info->opt_master,
626 &elem);
627 if (err < 0)
628 return err;
629
630 return 0;
631 }
632
633 /********************** device-specific config *************************/
634
635 /* untested... */
636 static const struct scarlett_device_info s6i6_info = {
637 .matrix_in = 18,
638 .matrix_out = 8,
639 .input_len = 6,
640 .output_len = 6,
641
642 .opt_master = {
643 .start = -1,
644 .len = 27,
645 .offsets = {0, 12, 16, 18, 18},
646 .names = NULL
647 },
648
649 .opt_matrix = {
650 .start = -1,
651 .len = 19,
652 .offsets = {0, 12, 16, 18, 18},
653 .names = NULL
654 },
655
656 .num_controls = 9,
657 .controls = {
658 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
659 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
660 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
661 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
662 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
663 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
664 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
665 { .num = 3, .type = SCARLETT_SWITCH_GAIN, .name = NULL},
666 { .num = 4, .type = SCARLETT_SWITCH_GAIN, .name = NULL},
667 },
668
669 .matrix_mux_init = {
670 12, 13, 14, 15, /* Analog -> 1..4 */
671 16, 17, /* SPDIF -> 5,6 */
672 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */
673 8, 9, 10, 11
674 }
675 };
676
677 /* untested... */
678 static const struct scarlett_device_info s8i6_info = {
679 .matrix_in = 18,
680 .matrix_out = 6,
681 .input_len = 8,
682 .output_len = 6,
683
684 .opt_master = {
685 .start = -1,
686 .len = 25,
687 .offsets = {0, 12, 16, 18, 18},
688 .names = NULL
689 },
690
691 .opt_matrix = {
692 .start = -1,
693 .len = 19,
694 .offsets = {0, 12, 16, 18, 18},
695 .names = NULL
696 },
697
698 .num_controls = 7,
699 .controls = {
700 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
701 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
702 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
703 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
704 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
705 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
706 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
707 },
708
709 .matrix_mux_init = {
710 12, 13, 14, 15, /* Analog -> 1..4 */
711 16, 17, /* SPDIF -> 5,6 */
712 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */
713 8, 9, 10, 11
714 }
715 };
716
717 static const struct scarlett_device_info s18i6_info = {
718 .matrix_in = 18,
719 .matrix_out = 6,
720 .input_len = 18,
721 .output_len = 6,
722
723 .opt_master = {
724 .start = -1,
725 .len = 31,
726 .offsets = {0, 6, 14, 16, 24},
727 .names = NULL,
728 },
729
730 .opt_matrix = {
731 .start = -1,
732 .len = 25,
733 .offsets = {0, 6, 14, 16, 24},
734 .names = NULL,
735 },
736
737 .num_controls = 5,
738 .controls = {
739 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
740 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" },
741 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
742 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
743 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
744 },
745
746 .matrix_mux_init = {
747 6, 7, 8, 9, 10, 11, 12, 13, /* Analog -> 1..8 */
748 16, 17, 18, 19, 20, 21, /* ADAT[1..6] -> 9..14 */
749 14, 15, /* SPDIF -> 15,16 */
750 0, 1 /* PCM[1,2] -> 17,18 */
751 }
752 };
753
754 static const struct scarlett_device_info s18i8_info = {
755 .matrix_in = 18,
756 .matrix_out = 8,
757 .input_len = 18,
758 .output_len = 8,
759
760 .opt_master = {
761 .start = -1,
762 .len = 35,
763 .offsets = {0, 8, 16, 18, 26},
764 .names = NULL
765 },
766
767 .opt_matrix = {
768 .start = -1,
769 .len = 27,
770 .offsets = {0, 8, 16, 18, 26},
771 .names = NULL
772 },
773
774 .num_controls = 10,
775 .controls = {
776 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
777 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone 1" },
778 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Headphone 2" },
779 { .num = 3, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
780 { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
781 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
782 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
783 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
784 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
785 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},
786 },
787
788 .matrix_mux_init = {
789 8, 9, 10, 11, 12, 13, 14, 15, /* Analog -> 1..8 */
790 18, 19, 20, 21, 22, 23, /* ADAT[1..6] -> 9..14 */
791 16, 17, /* SPDIF -> 15,16 */
792 0, 1 /* PCM[1,2] -> 17,18 */
793 }
794 };
795
796 static const struct scarlett_device_info s18i20_info = {
797 .matrix_in = 18,
798 .matrix_out = 8,
799 .input_len = 18,
800 .output_len = 20,
801
802 .opt_master = {
803 .start = -1,
804 .len = 47,
805 .offsets = {0, 20, 28, 30, 38},
806 .names = NULL
807 },
808
809 .opt_matrix = {
810 .start = -1,
811 .len = 39,
812 .offsets = {0, 20, 28, 30, 38},
813 .names = NULL
814 },
815
816 .num_controls = 10,
817 .controls = {
818 { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" },
819 { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Line 3/4" },
820 { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Line 5/6" },
821 { .num = 3, .type = SCARLETT_OUTPUTS, .name = "Line 7/8" },
822 { .num = 4, .type = SCARLETT_OUTPUTS, .name = "Line 9/10" },
823 { .num = 5, .type = SCARLETT_OUTPUTS, .name = "SPDIF" },
824 { .num = 6, .type = SCARLETT_OUTPUTS, .name = "ADAT 1/2" },
825 { .num = 7, .type = SCARLETT_OUTPUTS, .name = "ADAT 3/4" },
826 { .num = 8, .type = SCARLETT_OUTPUTS, .name = "ADAT 5/6" },
827 { .num = 9, .type = SCARLETT_OUTPUTS, .name = "ADAT 7/8" },
828 /*{ .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
829 { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL},
830 { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL},
831 { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL},
832 { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL},
833 { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},*/
834 },
835
836 .matrix_mux_init = {
837 20, 21, 22, 23, 24, 25, 26, 27, /* Analog -> 1..8 */
838 30, 31, 32, 33, 34, 35, /* ADAT[1..6] -> 9..14 */
839 28, 29, /* SPDIF -> 15,16 */
840 0, 1 /* PCM[1,2] -> 17,18 */
841 }
842 };
843
844
scarlett_controls_create_generic(struct usb_mixer_interface * mixer,const struct scarlett_device_info * info)845 static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer,
846 const struct scarlett_device_info *info)
847 {
848 int i, err;
849 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
850 const struct scarlett_mixer_control *ctl;
851 struct usb_mixer_elem_info *elem;
852
853 /* create master switch and playback volume */
854 err = add_new_ctl(mixer, &usb_scarlett_ctl_switch,
855 scarlett_ctl_resume, 0x0a, 0x01, 0,
856 USB_MIXER_S16, 1, "Master Playback Switch", NULL,
857 &elem);
858 if (err < 0)
859 return err;
860
861 err = add_new_ctl(mixer, &usb_scarlett_ctl_master,
862 scarlett_ctl_resume, 0x0a, 0x02, 0,
863 USB_MIXER_S16, 1, "Master Playback Volume", NULL,
864 &elem);
865 if (err < 0)
866 return err;
867
868 /* iterate through controls in info struct and create each one */
869 for (i = 0; i < info->num_controls; i++) {
870 ctl = &info->controls[i];
871
872 switch (ctl->type) {
873 case SCARLETT_OUTPUTS:
874 err = add_output_ctls(mixer, ctl->num, ctl->name, info);
875 if (err < 0)
876 return err;
877 break;
878 case SCARLETT_SWITCH_IMPEDANCE:
879 sprintf(mx, "Input %d Impedance Switch", ctl->num);
880 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum,
881 scarlett_ctl_enum_resume, 0x01,
882 0x09, ctl->num, USB_MIXER_S16, 1, mx,
883 &opt_impedance, &elem);
884 if (err < 0)
885 return err;
886 break;
887 case SCARLETT_SWITCH_PAD:
888 sprintf(mx, "Input %d Pad Switch", ctl->num);
889 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum,
890 scarlett_ctl_enum_resume, 0x01,
891 0x0b, ctl->num, USB_MIXER_S16, 1, mx,
892 &opt_pad, &elem);
893 if (err < 0)
894 return err;
895 break;
896 case SCARLETT_SWITCH_GAIN:
897 sprintf(mx, "Input %d Gain Switch", ctl->num);
898 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum,
899 scarlett_ctl_enum_resume, 0x01,
900 0x08, ctl->num, USB_MIXER_S16, 1, mx,
901 &opt_gain, &elem);
902 if (err < 0)
903 return err;
904 break;
905 }
906 }
907
908 return 0;
909 }
910
911 /*
912 * Create and initialize a mixer for the Focusrite(R) Scarlett
913 */
snd_scarlett_controls_create(struct usb_mixer_interface * mixer)914 int snd_scarlett_controls_create(struct usb_mixer_interface *mixer)
915 {
916 int err, i, o;
917 char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
918 const struct scarlett_device_info *info;
919 struct usb_mixer_elem_info *elem;
920 static char sample_rate_buffer[4] = { '\x80', '\xbb', '\x00', '\x00' };
921
922 /* only use UAC_VERSION_2 */
923 if (!mixer->protocol)
924 return 0;
925
926 switch (mixer->chip->usb_id) {
927 case USB_ID(0x1235, 0x8012):
928 info = &s6i6_info;
929 break;
930 case USB_ID(0x1235, 0x8002):
931 info = &s8i6_info;
932 break;
933 case USB_ID(0x1235, 0x8004):
934 info = &s18i6_info;
935 break;
936 case USB_ID(0x1235, 0x8014):
937 info = &s18i8_info;
938 break;
939 case USB_ID(0x1235, 0x800c):
940 info = &s18i20_info;
941 break;
942 default: /* device not (yet) supported */
943 return -EINVAL;
944 }
945
946 /* generic function to create controls */
947 err = scarlett_controls_create_generic(mixer, info);
948 if (err < 0)
949 return err;
950
951 /* setup matrix controls */
952 for (i = 0; i < info->matrix_in; i++) {
953 snprintf(mx, sizeof(mx), "Matrix %02d Input Playback Route",
954 i+1);
955 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum,
956 scarlett_ctl_enum_resume, 0x32,
957 0x06, i, USB_MIXER_S16, 1, mx,
958 &info->opt_matrix, &elem);
959 if (err < 0)
960 return err;
961
962 for (o = 0; o < info->matrix_out; o++) {
963 sprintf(mx, "Matrix %02d Mix %c Playback Volume", i+1,
964 o+'A');
965 err = add_new_ctl(mixer, &usb_scarlett_ctl,
966 scarlett_ctl_resume, 0x3c, 0x00,
967 (i << 3) + (o & 0x07), USB_MIXER_S16,
968 1, mx, NULL, &elem);
969 if (err < 0)
970 return err;
971
972 }
973 }
974
975 for (i = 0; i < info->input_len; i++) {
976 snprintf(mx, sizeof(mx), "Input Source %02d Capture Route",
977 i+1);
978 err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum,
979 scarlett_ctl_enum_resume, 0x34,
980 0x00, i, USB_MIXER_S16, 1, mx,
981 &info->opt_master, &elem);
982 if (err < 0)
983 return err;
984 }
985
986 /* val_len == 1 needed here */
987 err = add_new_ctl(mixer, &usb_scarlett_ctl_enum,
988 scarlett_ctl_enum_resume, 0x28, 0x01, 0,
989 USB_MIXER_U8, 1, "Sample Clock Source",
990 &opt_clock, &elem);
991 if (err < 0)
992 return err;
993
994 /* val_len == 1 and UAC2_CS_MEM */
995 err = add_new_ctl(mixer, &usb_scarlett_ctl_sync, NULL, 0x3c, 0x00, 2,
996 USB_MIXER_U8, 1, "Sample Clock Sync Status",
997 &opt_sync, &elem);
998 if (err < 0)
999 return err;
1000
1001 /* initialize sampling rate to 48000 */
1002 err = snd_usb_ctl_msg(mixer->chip->dev,
1003 usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR,
1004 USB_RECIP_INTERFACE | USB_TYPE_CLASS |
1005 USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->hostif) |
1006 (0x29 << 8), sample_rate_buffer, 4);
1007 if (err < 0)
1008 return err;
1009
1010 return err;
1011 }
1012