xref: /linux/drivers/media/pci/cx18/cx18-driver.h (revision 0ea5c948cb64bab5bc7a5516774eb8536f05aa0d)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  *  cx18 driver internal defines and structures
4  *
5  *  Derived from ivtv-driver.h
6  *
7  *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
8  *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
9  */
10 
11 #ifndef CX18_DRIVER_H
12 #define CX18_DRIVER_H
13 
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/sched/signal.h>
19 #include <linux/fs.h>
20 #include <linux/pci.h>
21 #include <linux/interrupt.h>
22 #include <linux/spinlock.h>
23 #include <linux/i2c.h>
24 #include <linux/i2c-algo-bit.h>
25 #include <linux/list.h>
26 #include <linux/unistd.h>
27 #include <linux/pagemap.h>
28 #include <linux/workqueue.h>
29 #include <linux/mutex.h>
30 #include <linux/slab.h>
31 #include <asm/byteorder.h>
32 
33 #include <media/v4l2-common.h>
34 #include <media/v4l2-ioctl.h>
35 #include <media/v4l2-device.h>
36 #include <media/v4l2-fh.h>
37 #include <media/tuner.h>
38 #include <media/i2c/ir-kbd-i2c.h>
39 #include "cx18-mailbox.h"
40 #include "cx18-av-core.h"
41 #include "cx23418.h"
42 
43 /* DVB */
44 #include <media/demux.h>
45 #include <media/dmxdev.h>
46 #include <media/dvb_demux.h>
47 #include <media/dvb_frontend.h>
48 #include <media/dvb_net.h>
49 #include <media/dvbdev.h>
50 
51 /* vb2 YUV support */
52 #include <media/videobuf2-vmalloc.h>
53 
54 #ifndef CONFIG_PCI
55 #  error "This driver requires kernel PCI support."
56 #endif
57 
58 #define CX18_MEM_OFFSET	0x00000000
59 #define CX18_MEM_SIZE	0x04000000
60 #define CX18_REG_OFFSET	0x02000000
61 
62 /* Maximum cx18 driver instances. */
63 #define CX18_MAX_CARDS 32
64 
65 /* Supported cards */
66 #define CX18_CARD_HVR_1600_ESMT	      0	/* Hauppauge HVR 1600 (ESMT memory) */
67 #define CX18_CARD_HVR_1600_SAMSUNG    1	/* Hauppauge HVR 1600 (Samsung memory) */
68 #define CX18_CARD_COMPRO_H900	      2	/* Compro VideoMate H900 */
69 #define CX18_CARD_YUAN_MPC718	      3	/* Yuan MPC718 */
70 #define CX18_CARD_CNXT_RAPTOR_PAL     4	/* Conexant Raptor PAL */
71 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
72 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
73 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
74 #define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
75 #define CX18_CARD_HVR_1600_S5H1411    9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
76 #define CX18_CARD_LAST		      9
77 
78 #define CX18_ENC_STREAM_TYPE_MPG  0
79 #define CX18_ENC_STREAM_TYPE_TS   1
80 #define CX18_ENC_STREAM_TYPE_YUV  2
81 #define CX18_ENC_STREAM_TYPE_VBI  3
82 #define CX18_ENC_STREAM_TYPE_PCM  4
83 #define CX18_ENC_STREAM_TYPE_IDX  5
84 #define CX18_ENC_STREAM_TYPE_RAD  6
85 #define CX18_MAX_STREAMS	  7
86 
87 /* system vendor and device IDs */
88 #define PCI_VENDOR_ID_CX      0x14f1
89 #define PCI_DEVICE_ID_CX23418 0x5b7a
90 
91 /* subsystem vendor ID */
92 #define CX18_PCI_ID_HAUPPAUGE		0x0070
93 #define CX18_PCI_ID_COMPRO		0x185b
94 #define CX18_PCI_ID_YUAN		0x12ab
95 #define CX18_PCI_ID_CONEXANT		0x14f1
96 #define CX18_PCI_ID_TOSHIBA		0x1179
97 #define CX18_PCI_ID_LEADTEK		0x107D
98 #define CX18_PCI_ID_GOTVIEW		0x5854
99 
100 /* ======================================================================== */
101 /* ========================== START USER SETTABLE DMA VARIABLES =========== */
102 /* ======================================================================== */
103 
104 /* DMA Buffers, Default size in MB allocated */
105 #define CX18_DEFAULT_ENC_TS_BUFFERS  1
106 #define CX18_DEFAULT_ENC_MPG_BUFFERS 2
107 #define CX18_DEFAULT_ENC_IDX_BUFFERS 1
108 #define CX18_DEFAULT_ENC_YUV_BUFFERS 2
109 #define CX18_DEFAULT_ENC_VBI_BUFFERS 1
110 #define CX18_DEFAULT_ENC_PCM_BUFFERS 1
111 
112 /* Maximum firmware DMA buffers per stream */
113 #define CX18_MAX_FW_MDLS_PER_STREAM 63
114 
115 /* YUV buffer sizes in bytes to ensure integer # of frames per buffer */
116 #define CX18_UNIT_ENC_YUV_BUFSIZE	(720 *  32 * 3 / 2) /* bytes */
117 #define CX18_625_LINE_ENC_YUV_BUFSIZE	(CX18_UNIT_ENC_YUV_BUFSIZE * 576/32)
118 #define CX18_525_LINE_ENC_YUV_BUFSIZE	(CX18_UNIT_ENC_YUV_BUFSIZE * 480/32)
119 
120 /* IDX buffer size should be a multiple of the index entry size from the chip */
121 struct cx18_enc_idx_entry {
122 	__le32 length;
123 	__le32 offset_low;
124 	__le32 offset_high;
125 	__le32 flags;
126 	__le32 pts_low;
127 	__le32 pts_high;
128 } __attribute__ ((packed));
129 #define CX18_UNIT_ENC_IDX_BUFSIZE \
130 	(sizeof(struct cx18_enc_idx_entry) * V4L2_ENC_IDX_ENTRIES)
131 
132 /* DMA buffer, default size in kB allocated */
133 #define CX18_DEFAULT_ENC_TS_BUFSIZE   32
134 #define CX18_DEFAULT_ENC_MPG_BUFSIZE  32
135 #define CX18_DEFAULT_ENC_IDX_BUFSIZE  (CX18_UNIT_ENC_IDX_BUFSIZE * 1 / 1024 + 1)
136 #define CX18_DEFAULT_ENC_YUV_BUFSIZE  (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1)
137 #define CX18_DEFAULT_ENC_PCM_BUFSIZE   4
138 
139 /* i2c stuff */
140 #define I2C_CLIENTS_MAX 16
141 
142 /* debugging */
143 
144 /* Flag to turn on high volume debugging */
145 #define CX18_DBGFLG_WARN  (1 << 0)
146 #define CX18_DBGFLG_INFO  (1 << 1)
147 #define CX18_DBGFLG_API   (1 << 2)
148 #define CX18_DBGFLG_DMA   (1 << 3)
149 #define CX18_DBGFLG_IOCTL (1 << 4)
150 #define CX18_DBGFLG_FILE  (1 << 5)
151 #define CX18_DBGFLG_I2C   (1 << 6)
152 #define CX18_DBGFLG_IRQ   (1 << 7)
153 /* Flag to turn on high volume debugging */
154 #define CX18_DBGFLG_HIGHVOL (1 << 8)
155 
156 /* NOTE: extra space before comma in 'fmt , ## args' is required for
157    gcc-2.95, otherwise it won't compile. */
158 #define CX18_DEBUG(x, type, fmt, args...) \
159 	do { \
160 		if ((x) & cx18_debug) \
161 			v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
162 	} while (0)
163 #define CX18_DEBUG_WARN(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args)
164 #define CX18_DEBUG_INFO(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args)
165 #define CX18_DEBUG_API(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_API, "api", fmt , ## args)
166 #define CX18_DEBUG_DMA(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_DMA, "dma", fmt , ## args)
167 #define CX18_DEBUG_IOCTL(fmt, args...) CX18_DEBUG(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args)
168 #define CX18_DEBUG_FILE(fmt, args...)  CX18_DEBUG(CX18_DBGFLG_FILE, "file", fmt , ## args)
169 #define CX18_DEBUG_I2C(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_I2C, "i2c", fmt , ## args)
170 #define CX18_DEBUG_IRQ(fmt, args...)   CX18_DEBUG(CX18_DBGFLG_IRQ, "irq", fmt , ## args)
171 
172 #define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \
173 	do { \
174 		if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
175 			v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
176 	} while (0)
177 #define CX18_DEBUG_HI_WARN(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args)
178 #define CX18_DEBUG_HI_INFO(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args)
179 #define CX18_DEBUG_HI_API(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_API, "api", fmt , ## args)
180 #define CX18_DEBUG_HI_DMA(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_DMA, "dma", fmt , ## args)
181 #define CX18_DEBUG_HI_IOCTL(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IOCTL, "ioctl", fmt , ## args)
182 #define CX18_DEBUG_HI_FILE(fmt, args...)  CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_FILE, "file", fmt , ## args)
183 #define CX18_DEBUG_HI_I2C(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_I2C, "i2c", fmt , ## args)
184 #define CX18_DEBUG_HI_IRQ(fmt, args...)   CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args)
185 
186 /* Standard kernel messages */
187 #define CX18_ERR(fmt, args...)      v4l2_err(&cx->v4l2_dev, fmt , ## args)
188 #define CX18_WARN(fmt, args...)     v4l2_warn(&cx->v4l2_dev, fmt , ## args)
189 #define CX18_INFO(fmt, args...)     v4l2_info(&cx->v4l2_dev, fmt , ## args)
190 
191 /* Messages for internal subdevs to use */
192 #define CX18_DEBUG_DEV(x, dev, type, fmt, args...) \
193 	do { \
194 		if ((x) & cx18_debug) \
195 			v4l2_info(dev, " " type ": " fmt , ## args); \
196 	} while (0)
197 #define CX18_DEBUG_WARN_DEV(dev, fmt, args...) \
198 		CX18_DEBUG_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
199 #define CX18_DEBUG_INFO_DEV(dev, fmt, args...) \
200 		CX18_DEBUG_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
201 #define CX18_DEBUG_API_DEV(dev, fmt, args...) \
202 		CX18_DEBUG_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
203 #define CX18_DEBUG_DMA_DEV(dev, fmt, args...) \
204 		CX18_DEBUG_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
205 #define CX18_DEBUG_IOCTL_DEV(dev, fmt, args...) \
206 		CX18_DEBUG_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
207 #define CX18_DEBUG_FILE_DEV(dev, fmt, args...) \
208 		CX18_DEBUG_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
209 #define CX18_DEBUG_I2C_DEV(dev, fmt, args...) \
210 		CX18_DEBUG_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
211 #define CX18_DEBUG_IRQ_DEV(dev, fmt, args...) \
212 		CX18_DEBUG_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
213 
214 #define CX18_DEBUG_HIGH_VOL_DEV(x, dev, type, fmt, args...) \
215 	do { \
216 		if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
217 			v4l2_info(dev, " " type ": " fmt , ## args); \
218 	} while (0)
219 #define CX18_DEBUG_HI_WARN_DEV(dev, fmt, args...) \
220 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
221 #define CX18_DEBUG_HI_INFO_DEV(dev, fmt, args...) \
222 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
223 #define CX18_DEBUG_HI_API_DEV(dev, fmt, args...) \
224 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
225 #define CX18_DEBUG_HI_DMA_DEV(dev, fmt, args...) \
226 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
227 #define CX18_DEBUG_HI_IOCTL_DEV(dev, fmt, args...) \
228 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
229 #define CX18_DEBUG_HI_FILE_DEV(dev, fmt, args...) \
230 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
231 #define CX18_DEBUG_HI_I2C_DEV(dev, fmt, args...) \
232 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
233 #define CX18_DEBUG_HI_IRQ_DEV(dev, fmt, args...) \
234 	CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
235 
236 #define CX18_ERR_DEV(dev, fmt, args...)      v4l2_err(dev, fmt , ## args)
237 #define CX18_WARN_DEV(dev, fmt, args...)     v4l2_warn(dev, fmt , ## args)
238 #define CX18_INFO_DEV(dev, fmt, args...)     v4l2_info(dev, fmt , ## args)
239 
240 extern int cx18_debug;
241 
242 struct cx18_options {
243 	int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */
244 	int cardtype;		/* force card type on load */
245 	int tuner;		/* set tuner on load */
246 	int radio;		/* enable/disable radio */
247 };
248 
249 /* per-mdl bit flags */
250 #define CX18_F_M_NEED_SWAP  0	/* mdl buffer data must be endianness swapped */
251 
252 /* per-stream, s_flags */
253 #define CX18_F_S_CLAIMED	3	/* this stream is claimed */
254 #define CX18_F_S_STREAMING      4	/* the fw is decoding/encoding this stream */
255 #define CX18_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
256 #define CX18_F_S_STREAMOFF	7	/* signal end of stream EOS */
257 #define CX18_F_S_APPL_IO        8	/* this stream is used read/written by an application */
258 #define CX18_F_S_STOPPING	9	/* telling the fw to stop capturing */
259 
260 /* per-cx18, i_flags */
261 #define CX18_F_I_LOADED_FW		0	/* Loaded firmware 1st time */
262 #define CX18_F_I_EOS			4	/* End of encoder stream */
263 #define CX18_F_I_RADIO_USER		5	/* radio tuner is selected */
264 #define CX18_F_I_ENC_PAUSED		13	/* the encoder is paused */
265 #define CX18_F_I_INITED			21	/* set after first open */
266 #define CX18_F_I_FAILED			22	/* set if first open failed */
267 
268 /* These are the VBI types as they appear in the embedded VBI private packets. */
269 #define CX18_SLICED_TYPE_TELETEXT_B     (1)
270 #define CX18_SLICED_TYPE_CAPTION_525    (4)
271 #define CX18_SLICED_TYPE_WSS_625        (5)
272 #define CX18_SLICED_TYPE_VPS            (7)
273 
274 /**
275  * list_entry_is_past_end - check if a previous loop cursor is off list end
276  * @pos:	the type * previously used as a loop cursor.
277  * @head:	the head for your list.
278  * @member:	the name of the list_head within the struct.
279  *
280  * Check if the entry's list_head is the head of the list, thus it's not a
281  * real entry but was the loop cursor that walked past the end
282  */
283 #define list_entry_is_past_end(pos, head, member) \
284 	(&pos->member == (head))
285 
286 struct cx18_vb2_buffer {
287 	/* Common video buffer sub-system struct */
288 	struct vb2_v4l2_buffer vb;
289 	struct list_head list;
290 	v4l2_std_id tvnorm; /* selected tv norm */
291 	u32 bytes_used;
292 };
293 
294 struct cx18_buffer {
295 	struct list_head list;
296 	dma_addr_t dma_handle;
297 	char *buf;
298 
299 	u32 bytesused;
300 	u32 readpos;
301 };
302 
303 struct cx18_mdl {
304 	struct list_head list;
305 	u32 id;		/* index into cx->scb->cpu_mdl[] of 1st cx18_mdl_ent */
306 
307 	unsigned int skipped;
308 	unsigned long m_flags;
309 
310 	struct list_head buf_list;
311 	struct cx18_buffer *curr_buf; /* current buffer in list for reading */
312 
313 	u32 bytesused;
314 	u32 readpos;
315 };
316 
317 struct cx18_queue {
318 	struct list_head list;
319 	atomic_t depth;
320 	u32 bytesused;
321 	spinlock_t lock;
322 };
323 
324 struct cx18_stream; /* forward reference */
325 
326 struct cx18_dvb {
327 	struct cx18_stream *stream;
328 	struct dmx_frontend hw_frontend;
329 	struct dmx_frontend mem_frontend;
330 	struct dmxdev dmxdev;
331 	struct dvb_adapter dvb_adapter;
332 	struct dvb_demux demux;
333 	struct dvb_frontend *fe;
334 	struct dvb_net dvbnet;
335 	int enabled;
336 	int feeding;
337 	struct mutex feedlock;
338 };
339 
340 struct cx18;	 /* forward reference */
341 struct cx18_scb; /* forward reference */
342 
343 
344 #define CX18_MAX_MDL_ACKS 2
345 #define CX18_MAX_IN_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7)
346 /* CPU_DE_RELEASE_MDL can burst CX18_MAX_FW_MDLS_PER_STREAM orders in a group */
347 
348 #define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1
349 #define CX18_F_EWO_MB_STALE_WHILE_PROC   0x2
350 #define CX18_F_EWO_MB_STALE \
351 	     (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC)
352 
353 struct cx18_in_work_order {
354 	struct work_struct work;
355 	atomic_t pending;
356 	struct cx18 *cx;
357 	unsigned long flags;
358 	int rpu;
359 	struct cx18_mailbox mb;
360 	struct cx18_mdl_ack mdl_ack[CX18_MAX_MDL_ACKS];
361 	char *str;
362 };
363 
364 #define CX18_INVALID_TASK_HANDLE 0xffffffff
365 
366 struct cx18_stream {
367 	/* These first five fields are always set, even if the stream
368 	   is not actually created. */
369 	struct video_device video_dev;	/* v4l2_dev is NULL when stream not created */
370 	struct cx18_dvb *dvb;		/* DVB / Digital Transport */
371 	struct cx18 *cx;		/* for ease of use */
372 	const char *name;		/* name of the stream */
373 	int type;			/* stream type */
374 	u32 handle;			/* task handle */
375 	u32 v4l2_dev_caps;		/* device capabilities */
376 	unsigned int mdl_base_idx;
377 
378 	u32 id;
379 	unsigned long s_flags;	/* status flags, see above */
380 	int dma;		/* can be PCI_DMA_TODEVICE,
381 				   PCI_DMA_FROMDEVICE or
382 				   PCI_DMA_NONE */
383 	wait_queue_head_t waitq;
384 
385 	/* Buffers */
386 	struct list_head buf_pool;	/* buffers not attached to an MDL */
387 	u32 buffers;			/* total buffers owned by this stream */
388 	u32 buf_size;			/* size in bytes of a single buffer */
389 
390 	/* MDL sizes - all stream MDLs are the same size */
391 	u32 bufs_per_mdl;
392 	u32 mdl_size;		/* total bytes in all buffers in a mdl */
393 
394 	/* MDL Queues */
395 	struct cx18_queue q_free;	/* free - in rotation, not committed */
396 	struct cx18_queue q_busy;	/* busy - in use by firmware */
397 	struct cx18_queue q_full;	/* full - data for user apps */
398 	struct cx18_queue q_idle;	/* idle - not in rotation */
399 
400 	struct work_struct out_work_order;
401 
402 	/* Videobuf for YUV video */
403 	u32 pixelformat;
404 	u32 vb_bytes_per_frame;
405 	u32 vb_bytes_per_line;
406 	struct list_head vb_capture;    /* video capture queue */
407 	spinlock_t vb_lock;
408 	struct timer_list vb_timeout;
409 	u32 sequence;
410 
411 	struct vb2_queue vidq;
412 	enum v4l2_buf_type vb_type;
413 };
414 
415 struct cx18_open_id {
416 	struct v4l2_fh fh;
417 	u32 open_id;
418 	int type;
419 	struct cx18 *cx;
420 };
421 
fh2id(struct v4l2_fh * fh)422 static inline struct cx18_open_id *fh2id(struct v4l2_fh *fh)
423 {
424 	return container_of(fh, struct cx18_open_id, fh);
425 }
426 
file2id(struct file * file)427 static inline struct cx18_open_id *file2id(struct file *file)
428 {
429 	return fh2id(file->private_data);
430 }
431 
432 /* forward declaration of struct defined in cx18-cards.h */
433 struct cx18_card;
434 
435 /*
436  * A note about "sliced" VBI data as implemented in this driver:
437  *
438  * Currently we collect the sliced VBI in the form of Ancillary Data
439  * packets, inserted by the AV core decoder/digitizer/slicer in the
440  * horizontal blanking region of the VBI lines, in "raw" mode as far as
441  * the Encoder is concerned.  We don't ever tell the Encoder itself
442  * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode)
443  *
444  * We then process the ancillary data ourselves to send the sliced data
445  * to the user application directly or build up MPEG-2 private stream 1
446  * packets to splice into (only!) MPEG-2 PS streams for the user app.
447  *
448  * (That's how ivtv essentially does it.)
449  *
450  * The Encoder should be able to extract certain sliced VBI data for
451  * us and provide it in a separate stream or splice it into any type of
452  * MPEG PS or TS stream, but this isn't implemented yet.
453  */
454 
455 /*
456  * Number of "raw" VBI samples per horizontal line we tell the Encoder to
457  * grab from the decoder/digitizer/slicer output for raw or sliced VBI.
458  * It depends on the pixel clock and the horiz rate:
459  *
460  * (1/Fh)*(2*Fp) = Samples/line
461  *     = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples
462  *
463  *  Sliced VBI data is sent as ancillary data during horizontal blanking
464  *  Raw VBI is sent as active video samples during vertcal blanking
465  *
466  *  We use a  BT.656 pxiel clock of 13.5 MHz and a BT.656 active line
467  *  length of 720 pixels @ 4:2:2 sampling.  Thus...
468  *
469  *  For systems that use a 15.734 kHz horizontal rate, such as
470  *  NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have:
471  *
472  *  (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line =
473  *  4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples
474  *
475  *  For systems that use a 15.625 kHz horizontal rate, such as
476  *  PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have:
477  *
478  *  (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line =
479  *  4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples
480  */
481 #define VBI_ACTIVE_SAMPLES	1444 /* 4 byte SAV + 720 Y + 720 U/V */
482 #define VBI_HBLANK_SAMPLES_60HZ	272 /* 4 byte EAV + 268 anc/fill */
483 #define VBI_HBLANK_SAMPLES_50HZ	284 /* 4 byte EAV + 280 anc/fill */
484 
485 #define CX18_VBI_FRAMES 32
486 
487 struct vbi_info {
488 	/* Current state of v4l2 VBI settings for this device */
489 	struct v4l2_format in;
490 	struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */
491 	u32 count;    /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */
492 	u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */
493 
494 	u32 frame; /* Count of VBI buffers/frames received from Encoder */
495 
496 	/*
497 	 * Vars for creation and insertion of MPEG Private Stream 1 packets
498 	 * of sliced VBI data into an MPEG PS
499 	 */
500 
501 	/* Boolean: create and insert Private Stream 1 packets into the PS */
502 	int insert_mpeg;
503 
504 	/*
505 	 * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines.
506 	 * Used in cx18-vbi.c only for collecting sliced data, and as a source
507 	 * during conversion of sliced VBI data into MPEG Priv Stream 1 packets.
508 	 * We don't need to save state here, but the array may have been a bit
509 	 * too big (2304 bytes) to alloc from the stack.
510 	 */
511 	struct v4l2_sliced_vbi_data sliced_data[36];
512 
513 	/*
514 	 * A ring buffer of driver-generated MPEG-2 PS
515 	 * Program Pack/Private Stream 1 packets for sliced VBI data insertion
516 	 * into the MPEG PS stream.
517 	 *
518 	 * In each sliced_mpeg_data[] buffer is:
519 	 *	16 byte MPEG-2 PS Program Pack Header
520 	 *	16 byte MPEG-2 Private Stream 1 PES Header
521 	 *	 4 byte magic number: "itv0" or "ITV0"
522 	 *	 4 byte first  field line mask, if "itv0"
523 	 *	 4 byte second field line mask, if "itv0"
524 	 *	36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
525 	 *
526 	 *	Each line in the payload is
527 	 *	 1 byte line header derived from the SDID (WSS, CC, VPS, etc.)
528 	 *	42 bytes of line data
529 	 *
530 	 * That's a maximum 1552 bytes of payload in the Private Stream 1 packet
531 	 * which is the payload size a PVR-350 (CX23415) MPEG decoder will
532 	 * accept for VBI data. So, including the headers, it's a maximum 1584
533 	 * bytes total.
534 	 */
535 #define CX18_SLICED_MPEG_DATA_MAXSZ	1584
536 	/* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */
537 #define CX18_SLICED_MPEG_DATA_BUFSZ	(CX18_SLICED_MPEG_DATA_MAXSZ+8)
538 	u8 *sliced_mpeg_data[CX18_VBI_FRAMES];
539 	u32 sliced_mpeg_size[CX18_VBI_FRAMES];
540 
541 	/* Count of Program Pack/Program Stream 1 packets inserted into PS */
542 	u32 inserted_frame;
543 
544 	/*
545 	 * A dummy driver stream transfer mdl & buffer with a copy of the next
546 	 * sliced_mpeg_data[] buffer for output to userland apps.
547 	 * Only used in cx18-fileops.c, but its state needs to persist at times.
548 	 */
549 	struct cx18_mdl sliced_mpeg_mdl;
550 	struct cx18_buffer sliced_mpeg_buf;
551 };
552 
553 /* Per cx23418, per I2C bus private algo callback data */
554 struct cx18_i2c_algo_callback_data {
555 	struct cx18 *cx;
556 	int bus_index;   /* 0 or 1 for the cx23418's 1st or 2nd I2C bus */
557 };
558 
559 #define CX18_MAX_MMIO_WR_RETRIES 10
560 
561 /* Struct to hold info about cx18 cards */
562 struct cx18 {
563 	int instance;
564 	struct pci_dev *pci_dev;
565 	struct v4l2_device v4l2_dev;
566 	struct v4l2_subdev *sd_av;     /* A/V decoder/digitizer sub-device */
567 	struct v4l2_subdev *sd_extmux; /* External multiplexer sub-dev */
568 
569 	const struct cx18_card *card;	/* card information */
570 	const char *card_name;  /* full name of the card */
571 	const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
572 	u8 is_50hz;
573 	u8 is_60hz;
574 	u8 nof_inputs;		/* number of video inputs */
575 	u8 nof_audio_inputs;	/* number of audio inputs */
576 	u32 v4l2_cap;		/* V4L2 capabilities of card */
577 	u32 hw_flags;		/* Hardware description of the board */
578 	unsigned int free_mdl_idx;
579 	struct cx18_scb __iomem *scb; /* pointer to SCB */
580 	struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
581 	struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/
582 
583 	struct cx18_av_state av_state;
584 
585 	/* codec settings */
586 	struct cx2341x_handler cxhdl;
587 	u32 filter_mode;
588 	u32 temporal_strength;
589 	u32 spatial_strength;
590 
591 	/* dualwatch */
592 	unsigned long dualwatch_jiffies;
593 	u32 dualwatch_stereo_mode;
594 
595 	struct mutex serialize_lock;    /* mutex used to serialize open/close/start/stop/ioctl operations */
596 	struct cx18_options options;	/* User options */
597 	int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
598 	int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
599 	struct cx18_stream streams[CX18_MAX_STREAMS];	/* Stream data */
600 	struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
601 	void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
602 				      size_t num_bytes);
603 
604 	unsigned long i_flags;  /* global cx18 flags */
605 	atomic_t ana_capturing;	/* count number of active analog capture streams */
606 	atomic_t tot_capturing;	/* total count number of active capture streams */
607 	int search_pack_header;
608 
609 	int open_id;		/* incremented each time an open occurs, used as
610 				   unique ID. Starts at 1, so 0 can be used as
611 				   uninitialized value in the stream->id. */
612 
613 	resource_size_t base_addr;
614 
615 	u8 card_rev;
616 	void __iomem *enc_mem, *reg_mem;
617 
618 	struct vbi_info vbi;
619 
620 	u64 mpg_data_received;
621 	u64 vbi_data_inserted;
622 
623 	wait_queue_head_t mb_apu_waitq;
624 	wait_queue_head_t mb_cpu_waitq;
625 	wait_queue_head_t cap_w;
626 	/* when the current DMA is finished this queue is woken up */
627 	wait_queue_head_t dma_waitq;
628 
629 	u32 sw1_irq_mask;
630 	u32 sw2_irq_mask;
631 	u32 hw2_irq_mask;
632 
633 	struct workqueue_struct *in_work_queue;
634 	char in_workq_name[39]; /* "cx18-NN-in" */
635 	struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS];
636 	char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */
637 
638 	/* i2c */
639 	struct i2c_adapter i2c_adap[2];
640 	struct i2c_algo_bit_data i2c_algo[2];
641 	struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2];
642 
643 	struct IR_i2c_init_data ir_i2c_init_data;
644 
645 	/* gpio */
646 	u32 gpio_dir;
647 	u32 gpio_val;
648 	struct mutex gpio_lock;
649 	struct v4l2_subdev sd_gpiomux;
650 	struct v4l2_subdev sd_resetctrl;
651 
652 	/* v4l2 and User settings */
653 
654 	/* codec settings */
655 	u32 audio_input;
656 	u32 active_input;
657 	v4l2_std_id std;
658 	v4l2_std_id tuner_std;	/* The norm of the tuner (fixed) */
659 
660 	/* Used for cx18-alsa module loading */
661 	struct work_struct request_module_wk;
662 };
663 
to_cx18(struct v4l2_device * v4l2_dev)664 static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev)
665 {
666 	return container_of(v4l2_dev, struct cx18, v4l2_dev);
667 }
668 
669 /* cx18 extensions to be loaded */
670 extern int (*cx18_ext_init)(struct cx18 *);
671 
672 /* Globals */
673 extern int cx18_first_minor;
674 
675 /*==============Prototypes==================*/
676 
677 /* Return non-zero if a signal is pending */
678 int cx18_msleep_timeout(unsigned int msecs, int intr);
679 
680 /* Read Hauppauge eeprom */
681 struct tveeprom; /* forward reference */
682 void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv);
683 
684 /* First-open initialization: load firmware, etc. */
685 int cx18_init_on_first_open(struct cx18 *cx);
686 
687 /* Test if the current VBI mode is raw (1) or sliced (0) */
cx18_raw_vbi(const struct cx18 * cx)688 static inline int cx18_raw_vbi(const struct cx18 *cx)
689 {
690 	return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
691 }
692 
693 /* Call the specified callback for all subdevs with a grp_id bit matching the
694  * mask in hw (if 0, then match them all). Ignore any errors. */
695 #define cx18_call_hw(cx, hw, o, f, args...)				\
696 	v4l2_device_mask_call_all(&(cx)->v4l2_dev, hw, o, f, ##args)
697 
698 #define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args)
699 
700 /* Call the specified callback for all subdevs with a grp_id bit matching the
701  * mask in hw (if 0, then match them all). If the callback returns an error
702  * other than 0 or -ENOIOCTLCMD, then return with that error code. */
703 #define cx18_call_hw_err(cx, hw, o, f, args...)				\
704 	v4l2_device_mask_call_until_err(&(cx)->v4l2_dev, hw, o, f, ##args)
705 
706 #define cx18_call_all_err(cx, o, f, args...) \
707 	cx18_call_hw_err(cx, 0, o, f , ##args)
708 
709 #endif /* CX18_DRIVER_H */
710