xref: /illumos-gate/usr/src/uts/common/sys/ib/adapters/tavor/tavor_misc.h (revision c7facc54c4abed9e554ff80225311e6b7048d3c9)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #ifndef	_SYS_IB_ADAPTERS_TAVOR_MISC_H
28 #define	_SYS_IB_ADAPTERS_TAVOR_MISC_H
29 
30 /*
31  * tavor_misc.h
32  *    Contains all of the prototypes, #defines, and structures necessary
33  *    for the Tavor Miscellaneous routines - Address Handle, Multicast,
34  *    Protection Domain, port-related, statistics (kstat) routines, and
35  *    extra VTS related routines.
36  *    Many of these functions are called by other parts of the Tavor driver
37  *    (and several routines are directly exposed through the IBTF CI
38  *    interface and/or kstat interface).
39  */
40 
41 #include <sys/types.h>
42 #include <sys/conf.h>
43 #include <sys/ddi.h>
44 #include <sys/sunddi.h>
45 
46 #include <sys/ib/adapters/tavor/tavor_ioctl.h>
47 
48 #ifdef __cplusplus
49 extern "C" {
50 #endif
51 
52 /*
53  * The following defines specify the default number of Address Handles (AH)
54  * and their size (in the hardware).  By default the maximum number of address
55  * handles is set to 32K.  This value is controllable through the
56  * "tavor_log_num_ah" configuration variable.  Note:  Tavor Address Handles
57  * are also referred to as UD Address Vectors (UDAV).
58  */
59 #define	TAVOR_NUM_AH_SHIFT		0xF
60 #define	TAVOR_NUM_AH			(1 << TAVOR_NUM_AH_SHIFT)
61 #define	TAVOR_UDAV_SIZE_SHIFT		0x5
62 #define	TAVOR_UDAV_SIZE			(1 << TAVOR_UDAV_SIZE_SHIFT)
63 
64 /*
65  * Minimal configuration value.
66  */
67 #define	TAVOR_NUM_AH_SHIFT_MIN		0xA
68 
69 /*
70  * The following macro determines whether the contents of a UDAV need to be
71  * sync'd (with ddi_dma_sync()).  This decision is based on whether the
72  * UDAV is in DDR memory (no sync) or system memory (sync required).
73  */
74 #define	TAVOR_UDAV_IS_SYNC_REQ(state)					\
75 	(((&((state)->ts_rsrc_hdl[TAVOR_UDAV]))->rsrc_loc ==		\
76 	TAVOR_IN_DDR) ? 0 : 1)
77 
78 /*
79  * These defines are used by tavor_get_addr_path() and tavor_set_addr_path()
80  * below.  They indicate the type of hardware context being passed in the
81  * "path" argument.  Because the Tavor hardware formats for the QP address
82  * path and UDAV address path structures is so similar, but not exactly the
83  * same, we use these flags to indicate which type of structure is being
84  * read from or written to.
85  */
86 #define	TAVOR_ADDRPATH_QP		0x0
87 #define	TAVOR_ADDRPATH_UDAV		0x1
88 
89 
90 /*
91  * The following defines specify the default number of Multicast Groups (MCG)
92  * and the maximum number of QP which can be associated with each.  By default
93  * the maximum number of multicast groups is set to 256, and the maximum number
94  * of QP per multicast group is set to 8.  These values are controllable
95  * through the "tavor_log_num_mcg" and "tavor_num_qp_per_mcg" configuration
96  * variables.
97  * We also define a macro below that is used to determine the size of each
98  * individual MCG entry (in hardware) based on the number of QP to be
99  * supported per multicast group.
100  */
101 #define	TAVOR_NUM_MCG_SHIFT		0x8
102 #define	TAVOR_NUM_MCG			(1 << TAVOR_NUM_MCG_SHIFT)
103 #define	TAVOR_NUM_QP_PER_MCG		8
104 
105 /*
106  * Minimal configuration values.
107  */
108 #define	TAVOR_NUM_MCG_SHIFT_MIN		0x4
109 #define	TAVOR_NUM_QP_PER_MCG_MIN	0x1
110 
111 /*
112  * Macro to compute the offset of the QP list in a given MCG entry.
113  */
114 #define	TAVOR_MCGMEM_SZ(state)						\
115 	((((state)->ts_cfg_profile->cp_num_qp_per_mcg) + 8) << 2)
116 #define	TAVOR_MCG_GET_QPLIST_PTR(mcg)					\
117 	((tavor_hw_mcg_qp_list_t *)((uintptr_t)(mcg) +			\
118 	sizeof (tavor_hw_mcg_t)))
119 
120 /*
121  * The following defines specify the characteristics of the Tavor multicast
122  * group hash table.  The TAVOR_NUM_MCG_HASH_SHIFT defines the size of the
123  * hash table (as a power-of-2), which is set to 16 by default.  This value
124  * is controllable through the "tavor_log_num_mcg_hash" configuration variable,
125  * but serious consideration should be taken before changing this value.  Note:
126  * its appropriate size should be a function of the entire table size (as
127  * defined by "tavor_log_num_mcg" and TAVOR_NUM_MCG_SHIFT above).
128  */
129 #define	TAVOR_NUM_MCG_HASH_SHIFT	0x4
130 
131 /*
132  * Minimal configuration value.
133  */
134 #define	TAVOR_NUM_MCG_HASH_SHIFT_MIN	0x2
135 
136 /*
137  * The following defines are used by the multicast routines to determine
138  * if a given "multicast GID" is valid or not (see tavor_mcg_is_mgid_valid
139  * for more details.  These values are pulled from the IBA specification,
140  * rev. 1.1
141  */
142 #define	TAVOR_MCG_TOPBITS_SHIFT		56
143 #define	TAVOR_MCG_TOPBITS_MASK		0xFF
144 #define	TAVOR_MCG_TOPBITS		0xFF
145 
146 #define	TAVOR_MCG_FLAGS_SHIFT		52
147 #define	TAVOR_MCG_FLAGS_MASK		0xF
148 #define	TAVOR_MCG_FLAGS_PERM		0x0
149 #define	TAVOR_MCG_FLAGS_NONPERM		0x1
150 
151 #define	TAVOR_MCG_SCOPE_SHIFT		48
152 #define	TAVOR_MCG_SCOPE_MASK		0xF
153 #define	TAVOR_MCG_SCOPE_LINKLOC		0x2
154 #define	TAVOR_MCG_SCOPE_SITELOC		0x5
155 #define	TAVOR_MCG_SCOPE_ORGLOC		0x8
156 #define	TAVOR_MCG_SCOPE_GLOBAL		0xE
157 
158 
159 /*
160  * The following defines specify the default number of Protection Domains (PD).
161  * By default the maximum number of protection domains is set to 64K.  This
162  * value is controllable through the "tavor_log_num_pd" configuration variable.
163  */
164 #define	TAVOR_NUM_PD_SHIFT		0x10
165 #define	TAVOR_NUM_PD			(1 << TAVOR_NUM_PD_SHIFT)
166 
167 /*
168  * The following defines specify the default number of Partition Keys (PKey)
169  * per port.  By default the maximum number of PKeys is set to 32 per port, for
170  * a total of 64 (assuming two ports) .  This value is controllable through the
171  * "tavor_log_max_pkeytbl" configuration variable.
172  */
173 #define	TAVOR_NUM_PKEYTBL_SHIFT		0x5
174 #define	TAVOR_NUM_PKEYTBL		(1 << TAVOR_NUM_PKEYTBL_SHIFT)
175 
176 /*
177  * The following defines specify the default number of SGIDs per port.  By
178  * default the maximum number of GIDS per port is set to 16.  This value
179  * is controllable through the "tavor_log_max_gidtbl" configuration variable.
180  */
181 #define	TAVOR_NUM_GIDTBL_SHIFT		0x4
182 #define	TAVOR_NUM_GIDTBL		(1 << TAVOR_NUM_GIDTBL_SHIFT)
183 
184 /*
185  * The following defines specify the default number of UAR pages.  By
186  * default the maximum number of UAR pages is set to 1024.  This value
187  * is controllable through the "tavor_log_num_uar" configuration variable.
188  * NOTE: This value should not be set larger than 15 (0xF) because the
189  * UAR index number is used as part of the minor number calculation (see
190  * tavor_open() for details) and the minor numbers should not be larger
191  * than eighteen bits (i.e. 15 bits of UAR index, 3 bits of driver instance
192  * number).  This is especially true for 32-bit kernels.
193  */
194 #define	TAVOR_NUM_UAR_SHIFT		0xA
195 #define	TAVOR_NUM_UAR			(1 << TAVOR_NUM_UAR_SHIFT)
196 
197 /*
198  * Minimal configuration value.
199  */
200 #define	TAVOR_NUM_UAR_SHIFT_MIN		0x4
201 
202 /*
203  * These defines specify some miscellaneous port-related configuration
204  * information.  Specifically, TAVOR_MAX_MTU is used to define the maximum
205  * MTU supported for each Tavor port, TAVOR_MAX_PORT_WIDTH is used to define
206  * the maximum supported port width, and the TAVOR_MAX_VLCAP define is used
207  * to specify the maximum number of VLs supported, excluding VL15.  Both
208  * of these values are controllable and get be set using the "tavor_max_mtu"
209  * and "tavor_max_vlcap" configuration variables.  Note: as with many of the
210  * configurable variables, caution should be exercised when changing these
211  * values.  These values, specifically, should not be set any larger than
212  * they are defined here as these are set to the current Tavor device
213  * maximums.
214  */
215 #define	TAVOR_MAX_MTU			0x4
216 #define	TAVOR_MAX_PORT_WIDTH		0x3
217 #define	TAVOR_MAX_VLCAP			0x8
218 
219 /*
220  * These last defines are used by the statistics counting routines (kstats)
221  * for initialization of the structures associated with the IB statistics
222  * access routines.  The TAVOR_CNTR_MASK and TAVOR_CNTR_SIZE defines are
223  * used to divide the "pcr" register into two 32-bit counters (one for "pic0"
224  * and the other for "pic1")
225  */
226 #define	TAVOR_CNTR_MASK		0xFFFFFFFF
227 #define	TAVOR_CNTR_SIZE		32
228 #define	TAVOR_CNTR_NUMENTRIES	17
229 
230 /*
231  * The following defines are used by tavor_queue_alloc() to specify whether
232  * a given QP/CQ/EQ queue memory should be allocated from kernel system memory
233  * (TAVOR_QUEUE_LOCATION_NORMAL), from user-mappable system memory
234  * (TAVOR_QUEUE_LOCATION_USERLAND), or from local-attached DDR memory
235  * (TAVOR_QUEUE_LOCATION_INDDR).
236  */
237 #define	TAVOR_QUEUE_LOCATION_NORMAL	0x1
238 #define	TAVOR_QUEUE_LOCATION_USERLAND	0x2
239 #define	TAVOR_QUEUE_LOCATION_INDDR	0x3
240 
241 /*
242  * Minimum number of ticks to delay between successive polls of the CQ in
243  * VTS ioctl loopback test
244  */
245 #define	TAVOR_VTS_LOOPBACK_MIN_WAIT_DUR	50
246 
247 
248 /*
249  * The tavor_sw_ah_s structure is also referred to using the "tavor_ahhdl_t"
250  * typedef (see tavor_typedef.h).  It encodes all the information necessary
251  * to track the various resources (e.g. the UDAV hardware resource) needed to
252  * allocate, query, modify, and (later) free an address handle.
253  *
254  * In specific, it has a lock to ensure single-threaded access, it stores a
255  * pointer to the associated MR handle (for the mapped UDAV memory) and a
256  * pointer to the associated PD handle.  And it also contains a copy of the
257  * GUID stored into the address handle.  The reason for this extra copy of
258  * the GUID info has to do with Tavor PRM compliance and is fully explained
259  * in tavor_misc.c
260  *
261  * It also has the always necessary backpointer to the resource for the AH
262  * handle structure itself.
263  */
264 struct tavor_sw_ah_s {
265 	kmutex_t	ah_lock;
266 	tavor_pdhdl_t	ah_pdhdl;
267 	tavor_mrhdl_t	ah_mrhdl;
268 	tavor_rsrc_t	*ah_udavrsrcp;
269 	tavor_rsrc_t	*ah_rsrcp;
270 	uint64_t	ah_save_guid;
271 	ibt_srate_t	ah_save_srate;
272 	uint_t		ah_sync;
273 };
274 _NOTE(MUTEX_PROTECTS_DATA(tavor_sw_ah_s::ah_lock,
275     tavor_sw_ah_s::ah_pdhdl
276     tavor_sw_ah_s::ah_mrhdl
277     tavor_sw_ah_s::ah_udavrsrcp
278     tavor_sw_ah_s::ah_rsrcp
279     tavor_sw_ah_s::ah_save_guid
280     tavor_sw_ah_s::ah_sync))
281 
282 /*
283  * The tavor_sw_mcg_list_s structure is also referred to using the
284  * "tavor_mcghdl_t" typedef (see tavor_typedef.h).  It encodes all the
285  * information necessary to track the various resources needed to for attaching
286  * and detaching QP from multicast groups.
287  *
288  * The Tavor driver keeps an array of these and uses them as a shadow for
289  * the real HW-based MCG table.  They hold all the necessary information
290  * to track the resources and to allow fast access to the MCG table.  First,
291  * it had a 128-bit multicast GID (stored in "mcg_mgid_h" and "mcg_mgid_l".
292  * next if has a field to indicate the index of the next tavor_mcghdl_t in
293  * the current hash chain (zero is the end of the chain).  Note: this very
294  * closely mimics what the hardware MCG entry has. Then it has a field to
295  * indicate how many QP are currently attached to the given MCG.  And, lastly,
296  * it has the obligatory backpointer to the resource for the MCH handle
297  * structure itself.
298  */
299 struct tavor_sw_mcg_list_s {
300 	uint64_t	mcg_mgid_h;
301 	uint64_t	mcg_mgid_l;
302 	uint_t		mcg_next_indx;
303 	uint_t		mcg_num_qps;
304 	tavor_rsrc_t	*mcg_rsrcp;
305 };
306 
307 /*
308  * The tavor_sw_pd_s structure is also referred to using the "tavor_pdhdl_t"
309  * typedef (see tavor_typedef.h).  It encodes all the information necessary
310  * to track the various resources needed to allocate and free protection
311  * domains
312  *
313  * Specifically, it has reference count and a lock to ensure single threaded
314  * access to it.  It has a field for the protection domain number ("pd_pdnum").
315  * And it also has the obligatory backpointer to the resource for the PD
316  * handle structure itself.
317  */
318 struct tavor_sw_pd_s {
319 	kmutex_t	pd_lock;
320 	uint32_t	pd_pdnum;
321 	uint32_t	pd_refcnt;
322 	tavor_rsrc_t	*pd_rsrcp;
323 };
324 _NOTE(READ_ONLY_DATA(tavor_sw_pd_s::pd_pdnum
325     tavor_sw_pd_s::pd_rsrcp))
326 _NOTE(MUTEX_PROTECTS_DATA(tavor_sw_pd_s::pd_lock,
327     tavor_sw_pd_s::pd_refcnt))
328 
329 /*
330  * The tavor_qalloc_info_s structure is also referred to using the
331  * "tavor_qalloc_info_t" typedef (see tavor_typedef.h).  It holds all the
332  * information necessary to track the resources for each of the various Tavor
333  * queue types (i.e. Event Queue, Completion Queue, Work Queue).
334  *
335  * Specifically, it has the size, alignment restrictions, and location (in DDR
336  * or in system memory).  And depending on the location, it also has the
337  * ddi_dma_handle_t, ddi_acc_handle_t, and pointers used for reading/writing to
338  * the queue's memory.
339  */
340 struct tavor_qalloc_info_s {
341 	uint64_t		qa_size;
342 	uint64_t		qa_alloc_align;
343 	uint64_t		qa_bind_align;
344 	uint32_t		*qa_buf_real;
345 	uint32_t		*qa_buf_aligned;
346 	uint64_t		qa_buf_realsz;
347 	uint_t			qa_location;
348 	ddi_dma_handle_t	qa_dmahdl;
349 	ddi_acc_handle_t	qa_acchdl;
350 	ddi_umem_cookie_t	qa_umemcookie;
351 };
352 
353 /*
354  * The tavor_ks_mask_t structure encodes all the information necessary for
355  * the individual kstat entries.  The "ks_reg_offset" field contains the
356  * hardware offset for the corresponding counter, and "ks_reg_shift" and
357  * "ks_reg_mask" contain shift and mask registers used by the access routines.
358  * Also the "ks_old_pic0" and "ks_old_pic1" fields contain the most recently
359  * read value for the corresponding port ("pic").  Note:  An array of these
360  * structures is part of the "tavor_ks_info_t" structure below.
361  */
362 typedef struct tavor_ks_mask_s {
363 	char		*ks_evt_name;
364 	uint64_t	ks_reg_offset;
365 	uint32_t	ks_reg_shift;
366 	uint32_t	ks_reg_mask;
367 	uint32_t	ks_old_pic0;
368 	uint32_t	ks_old_pic1;
369 } tavor_ks_mask_t;
370 
371 /*
372  * Index into the named data components of 64 bit "perf_counters" kstat.
373  */
374 enum {
375 	TAVOR_PERFCNTR64_ENABLE_IDX = 0,
376 	TAVOR_PERFCNTR64_XMIT_DATA_IDX,
377 	TAVOR_PERFCNTR64_RECV_DATA_IDX,
378 	TAVOR_PERFCNTR64_XMIT_PKTS_IDX,
379 	TAVOR_PERFCNTR64_RECV_PKTS_IDX,
380 	TAVOR_PERFCNTR64_NUM_COUNTERS
381 };
382 
383 /*
384  * Data associated with the 64 bit "perf_counters" kstat. One for each port.
385  */
386 typedef struct tavor_perfcntr64_ks_info_s {
387 	struct kstat	*tki64_ksp;
388 	int		tki64_enabled;
389 	uint64_t	tki64_counters[TAVOR_PERFCNTR64_NUM_COUNTERS];
390 	uint32_t	tki64_last_read[TAVOR_PERFCNTR64_NUM_COUNTERS];
391 	uint_t		tki64_port_num;
392 	tavor_state_t	*tki64_state;
393 } tavor_perfcntr64_ks_info_t;
394 
395 
396 /*
397  * The tavor_ks_info_t structure stores all the information necessary for
398  * tracking the resources associated with each of the various kstats.  In
399  * addition to containing pointers to each of the counter and pic kstats,
400  * this structure also contains "tki_pcr" which is the control register that
401  * determines which of the countable entries (from the "tki_ib_perfcnt[]"
402  * array) is being currently accessed.
403  */
404 typedef struct tavor_ks_info_s {
405 	struct kstat	*tki_cntr_ksp;
406 	struct kstat	*tki_picN_ksp[TAVOR_NUM_PORTS];
407 	uint64_t	tki_pcr;
408 	uint64_t	tki_pic0;
409 	uint64_t	tki_pic1;
410 	tavor_ks_mask_t	tki_ib_perfcnt[TAVOR_CNTR_NUMENTRIES];
411 	kt_did_t	tki_perfcntr64_thread_id;
412 	kmutex_t	tki_perfcntr64_lock;
413 	kcondvar_t	tki_perfcntr64_cv;
414 	uint_t		tki_perfcntr64_flags;	/* see below */
415 	tavor_perfcntr64_ks_info_t	tki_perfcntr64[TAVOR_NUM_PORTS];
416 } tavor_ks_info_t;
417 
418 /* tki_perfcntr64_flags */
419 #define	TAVOR_PERFCNTR64_THREAD_CREATED		0x0001
420 #define	TAVOR_PERFCNTR64_THREAD_EXIT		0x0002
421 
422 /*
423  * The tavor_ports_ioctl32_t, tavor_loopback_ioctl32_t, and
424  * tavor_flash_ioctl32_s structures are used internally by the Tavor
425  * driver to accomodate 32-bit applications which need to access the
426  * Tavor ioctls.  They are 32-bit versions of externally available
427  * structures defined in tavor_ioctl.h
428  */
429 typedef struct tavor_ports_ioctl32_s {
430 	uint_t			tp_revision;
431 	caddr32_t		tp_ports;
432 	uint8_t			tp_num_ports;
433 } tavor_ports_ioctl32_t;
434 
435 typedef struct tavor_loopback_ioctl32_s {
436 	uint_t			tlb_revision;
437 	caddr32_t		tlb_send_buf;
438 	caddr32_t		tlb_fail_buf;
439 	uint_t			tlb_buf_sz;
440 	uint_t			tlb_num_iter;
441 	uint_t			tlb_pass_done;
442 	uint_t			tlb_timeout;
443 	tavor_loopback_error_t	tlb_error_type;
444 	uint8_t			tlb_port_num;
445 	uint8_t			tlb_num_retry;
446 } tavor_loopback_ioctl32_t;
447 
448 typedef struct tavor_flash_ioctl32_s {
449 	uint32_t	tf_type;
450 	caddr32_t	tf_sector;
451 	uint32_t	tf_sector_num;
452 	uint32_t	tf_addr;
453 	uint32_t	tf_quadlet;
454 	uint8_t		tf_byte;
455 } tavor_flash_ioctl32_t;
456 
457 /*
458  * The tavor_loopback_comm_t and tavor_loopback_state_t structures below
459  * are used to store all of the relevant state information needed to keep
460  * track of a single VTS ioctl loopback test run.
461  */
462 typedef struct tavor_loopback_comm_s {
463 	uint8_t			*tlc_buf;
464 	size_t			tlc_buf_sz;
465 	ibt_mr_desc_t		tlc_mrdesc;
466 
467 	tavor_mrhdl_t		tlc_mrhdl;
468 	tavor_cqhdl_t		tlc_cqhdl[2];
469 	tavor_qphdl_t		tlc_qp_hdl;
470 
471 	ibt_mr_attr_t		tlc_memattr;
472 	uint_t			tlc_qp_num;
473 	ibt_cq_attr_t		tlc_cq_attr;
474 	ibt_qp_alloc_attr_t	tlc_qp_attr;
475 	ibt_chan_sizes_t	tlc_chan_sizes;
476 	ibt_qp_info_t		tlc_qp_info;
477 	ibt_queue_sizes_t	tlc_queue_sizes;
478 	ibt_send_wr_t		tlc_wr;
479 	ibt_wr_ds_t		tlc_sgl;
480 	ibt_wc_t		tlc_wc;
481 	uint_t			tlc_num_polled;
482 	ibt_status_t		tlc_status;
483 	int			tlc_complete;
484 	int			tlc_wrid;
485 } tavor_loopback_comm_t;
486 
487 typedef struct tavor_loopback_state_s {
488 	uint8_t			tls_port;
489 	uint_t			tls_lid;
490 	uint8_t			tls_retry;
491 	tavor_state_t		*tls_state;
492 	ibc_hca_hdl_t		tls_hca_hdl;
493 	tavor_pdhdl_t		tls_pd_hdl;
494 	tavor_loopback_comm_t	tls_tx;
495 	tavor_loopback_comm_t	tls_rx;
496 	ibt_status_t		tls_status;
497 	int			tls_err;
498 	int			tls_pkey_ix;
499 	int			tls_timeout;
500 } tavor_loopback_state_t;
501 
502 /* Tavor Address Handle routines */
503 int tavor_ah_alloc(tavor_state_t *state, tavor_pdhdl_t pd,
504     ibt_adds_vect_t *attr_p, tavor_ahhdl_t *ahhdl, uint_t sleepflag);
505 int tavor_ah_free(tavor_state_t *state, tavor_ahhdl_t *ahhdl,
506     uint_t sleepflag);
507 int tavor_ah_query(tavor_state_t *state, tavor_ahhdl_t ahhdl,
508     tavor_pdhdl_t *pdhdl, ibt_adds_vect_t *attr_p);
509 int tavor_ah_modify(tavor_state_t *state, tavor_ahhdl_t ahhdl,
510     ibt_adds_vect_t *attr_p);
511 
512 /* Tavor Multicast Group routines */
513 int tavor_mcg_attach(tavor_state_t *state, tavor_qphdl_t qphdl, ib_gid_t gid,
514     ib_lid_t lid);
515 int tavor_mcg_detach(tavor_state_t *state, tavor_qphdl_t qphdl, ib_gid_t gid,
516     ib_lid_t lid);
517 
518 /* Tavor Protection Domain routines */
519 int tavor_pd_alloc(tavor_state_t *state, tavor_pdhdl_t *pdhdl,
520     uint_t sleepflag);
521 int tavor_pd_free(tavor_state_t *state, tavor_pdhdl_t *pdhdl);
522 void tavor_pd_refcnt_inc(tavor_pdhdl_t pd);
523 void tavor_pd_refcnt_dec(tavor_pdhdl_t pd);
524 
525 /* Tavor port-related routines */
526 int tavor_port_query(tavor_state_t *state, uint_t port,
527     ibt_hca_portinfo_t *pi);
528 int tavor_port_modify(tavor_state_t *state, uint8_t port,
529     ibt_port_modify_flags_t flags, uint8_t init_type);
530 
531 /* Tavor statistics (kstat) routines */
532 int tavor_kstat_init(tavor_state_t *state);
533 void tavor_kstat_fini(tavor_state_t *state);
534 
535 /* Miscellaneous routines */
536 int tavor_set_addr_path(tavor_state_t *state, ibt_adds_vect_t *av,
537     tavor_hw_addr_path_t *path, uint_t type, tavor_qphdl_t qp);
538 void tavor_get_addr_path(tavor_state_t *state, tavor_hw_addr_path_t *path,
539     ibt_adds_vect_t *av, uint_t type, tavor_qphdl_t qp);
540 int tavor_portnum_is_valid(tavor_state_t *state, uint_t portnum);
541 int tavor_pkeyindex_is_valid(tavor_state_t *state, uint_t pkeyindx);
542 int tavor_queue_alloc(tavor_state_t *state, tavor_qalloc_info_t *qa_info,
543     uint_t sleepflag);
544 void tavor_queue_free(tavor_state_t *state, tavor_qalloc_info_t *qa_info);
545 void tavor_dma_attr_init(ddi_dma_attr_t *dma_attr);
546 
547 #ifdef __cplusplus
548 }
549 #endif
550 
551 #endif	/* _SYS_IB_ADAPTERS_TAVOR_MISC_H */
552