xref: /illumos-gate/usr/src/uts/common/os/streamio.c (revision bbf215553c7233fbab8a0afdf1fac74c44781867)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
22 /*	  All Rights Reserved	*/
23 
24 
25 /*
26  * Copyright (c) 1988, 2010, Oracle and/or its affiliates. All rights reserved.
27  * Copyright 2017 Joyent, Inc.
28  * Copyright 2020 OmniOS Community Edition (OmniOSce) Association.
29  */
30 
31 #include <sys/types.h>
32 #include <sys/sysmacros.h>
33 #include <sys/param.h>
34 #include <sys/errno.h>
35 #include <sys/signal.h>
36 #include <sys/stat.h>
37 #include <sys/proc.h>
38 #include <sys/cred.h>
39 #include <sys/user.h>
40 #include <sys/vnode.h>
41 #include <sys/file.h>
42 #include <sys/stream.h>
43 #include <sys/strsubr.h>
44 #include <sys/stropts.h>
45 #include <sys/tihdr.h>
46 #include <sys/var.h>
47 #include <sys/poll.h>
48 #include <sys/termio.h>
49 #include <sys/ttold.h>
50 #include <sys/systm.h>
51 #include <sys/uio.h>
52 #include <sys/cmn_err.h>
53 #include <sys/sad.h>
54 #include <sys/netstack.h>
55 #include <sys/priocntl.h>
56 #include <sys/jioctl.h>
57 #include <sys/procset.h>
58 #include <sys/session.h>
59 #include <sys/kmem.h>
60 #include <sys/filio.h>
61 #include <sys/vtrace.h>
62 #include <sys/debug.h>
63 #include <sys/strredir.h>
64 #include <sys/fs/fifonode.h>
65 #include <sys/fs/snode.h>
66 #include <sys/strlog.h>
67 #include <sys/strsun.h>
68 #include <sys/project.h>
69 #include <sys/kbio.h>
70 #include <sys/msio.h>
71 #include <sys/tty.h>
72 #include <sys/ptyvar.h>
73 #include <sys/vuid_event.h>
74 #include <sys/modctl.h>
75 #include <sys/sunddi.h>
76 #include <sys/sunldi_impl.h>
77 #include <sys/autoconf.h>
78 #include <sys/policy.h>
79 #include <sys/dld.h>
80 #include <sys/zone.h>
81 #include <sys/ptms.h>
82 #include <sys/limits.h>
83 #include <c2/audit.h>
84 
85 /*
86  * This define helps improve the readability of streams code while
87  * still maintaining a very old streams performance enhancement.  The
88  * performance enhancement basically involved having all callers
89  * of straccess() perform the first check that straccess() will do
90  * locally before actually calling straccess().  (There by reducing
91  * the number of unnecessary calls to straccess().)
92  */
93 #define	i_straccess(x, y)	((stp->sd_sidp == NULL) ? 0 : \
94 				    (stp->sd_vnode->v_type == VFIFO) ? 0 : \
95 				    straccess((x), (y)))
96 
97 /*
98  * what is mblk_pull_len?
99  *
100  * If a streams message consists of many short messages,
101  * a performance degradation occurs from copyout overhead.
102  * To decrease the per mblk overhead, messages that are
103  * likely to consist of many small mblks are pulled up into
104  * one continuous chunk of memory.
105  *
106  * To avoid the processing overhead of examining every
107  * mblk, a quick heuristic is used. If the first mblk in
108  * the message is shorter than mblk_pull_len, it is likely
109  * that the rest of the mblk will be short.
110  *
111  * This heuristic was decided upon after performance tests
112  * indicated that anything more complex slowed down the main
113  * code path.
114  */
115 #define	MBLK_PULL_LEN 64
116 uint32_t mblk_pull_len = MBLK_PULL_LEN;
117 
118 /*
119  * The sgttyb_handling flag controls the handling of the old BSD
120  * TIOCGETP, TIOCSETP, and TIOCSETN ioctls as follows:
121  *
122  * 0 - Emit no warnings at all and retain old, broken behavior.
123  * 1 - Emit no warnings and silently handle new semantics.
124  * 2 - Send cmn_err(CE_NOTE) when either TIOCSETP or TIOCSETN is used
125  *     (once per system invocation).  Handle with new semantics.
126  * 3 - Send SIGSYS when any TIOCGETP, TIOCSETP, or TIOCSETN call is
127  *     made (so that offenders drop core and are easy to debug).
128  *
129  * The "new semantics" are that TIOCGETP returns B38400 for
130  * sg_[io]speed if the corresponding value is over B38400, and that
131  * TIOCSET[PN] accept B38400 in these cases to mean "retain current
132  * bit rate."
133  */
134 int sgttyb_handling = 1;
135 static boolean_t sgttyb_complaint;
136 
137 /* don't push drcompat module by default on Style-2 streams */
138 static int push_drcompat = 0;
139 
140 /*
141  * id value used to distinguish between different ioctl messages
142  */
143 static uint32_t ioc_id;
144 
145 static void putback(struct stdata *, queue_t *, mblk_t *, int);
146 static void strcleanall(struct vnode *);
147 static int strwsrv(queue_t *);
148 static int strdocmd(struct stdata *, struct strcmd *, cred_t *);
149 
150 /*
151  * qinit and module_info structures for stream head read and write queues
152  */
153 struct module_info strm_info = { 0, "strrhead", 0, INFPSZ, STRHIGH, STRLOW };
154 struct module_info stwm_info = { 0, "strwhead", 0, 0, 0, 0 };
155 struct qinit strdata = { strrput, NULL, NULL, NULL, NULL, &strm_info };
156 struct qinit stwdata = { NULL, strwsrv, NULL, NULL, NULL, &stwm_info };
157 struct module_info fiform_info = { 0, "fifostrrhead", 0, PIPE_BUF, FIFOHIWAT,
158     FIFOLOWAT };
159 struct module_info fifowm_info = { 0, "fifostrwhead", 0, 0, 0, 0 };
160 struct qinit fifo_strdata = { strrput, NULL, NULL, NULL, NULL, &fiform_info };
161 struct qinit fifo_stwdata = { NULL, strwsrv, NULL, NULL, NULL, &fifowm_info };
162 
163 extern kmutex_t	strresources;	/* protects global resources */
164 extern kmutex_t muxifier;	/* single-threads multiplexor creation */
165 
166 static boolean_t msghasdata(mblk_t *bp);
167 #define	msgnodata(bp) (!msghasdata(bp))
168 
169 /*
170  * Stream head locking notes:
171  *	There are four monitors associated with the stream head:
172  *	1. v_stream monitor: in stropen() and strclose() v_lock
173  *		is held while the association of vnode and stream
174  *		head is established or tested for.
175  *	2. open/close/push/pop monitor: sd_lock is held while each
176  *		thread bids for exclusive access to this monitor
177  *		for opening or closing a stream.  In addition, this
178  *		monitor is entered during pushes and pops.  This
179  *		guarantees that during plumbing operations there
180  *		is only one thread trying to change the plumbing.
181  *		Any other threads present in the stream are only
182  *		using the plumbing.
183  *	3. read/write monitor: in the case of read, a thread holds
184  *		sd_lock while trying to get data from the stream
185  *		head queue.  if there is none to fulfill a read
186  *		request, it sets RSLEEP and calls cv_wait_sig() down
187  *		in strwaitq() to await the arrival of new data.
188  *		when new data arrives in strrput(), sd_lock is acquired
189  *		before testing for RSLEEP and calling cv_broadcast().
190  *		the behavior of strwrite(), strwsrv(), and WSLEEP
191  *		mirror this.
192  *	4. ioctl monitor: sd_lock is gotten to ensure that only one
193  *		thread is doing an ioctl at a time.
194  */
195 
196 static int
push_mod(queue_t * qp,dev_t * devp,struct stdata * stp,const char * name,int anchor,cred_t * crp,uint_t anchor_zoneid)197 push_mod(queue_t *qp, dev_t *devp, struct stdata *stp, const char *name,
198     int anchor, cred_t *crp, uint_t anchor_zoneid)
199 {
200 	int error;
201 	fmodsw_impl_t *fp;
202 
203 	if (stp->sd_flag & (STRHUP|STRDERR|STWRERR)) {
204 		error = (stp->sd_flag & STRHUP) ? ENXIO : EIO;
205 		return (error);
206 	}
207 	if (stp->sd_pushcnt >= nstrpush) {
208 		return (EINVAL);
209 	}
210 
211 	if ((fp = fmodsw_find(name, FMODSW_HOLD | FMODSW_LOAD)) == NULL) {
212 		stp->sd_flag |= STREOPENFAIL;
213 		return (EINVAL);
214 	}
215 
216 	/*
217 	 * push new module and call its open routine via qattach
218 	 */
219 	if ((error = qattach(qp, devp, 0, crp, fp, B_FALSE)) != 0)
220 		return (error);
221 
222 	/*
223 	 * Check to see if caller wants a STREAMS anchor
224 	 * put at this place in the stream, and add if so.
225 	 */
226 	mutex_enter(&stp->sd_lock);
227 	if (anchor == stp->sd_pushcnt) {
228 		stp->sd_anchor = stp->sd_pushcnt;
229 		stp->sd_anchorzone = anchor_zoneid;
230 	}
231 	mutex_exit(&stp->sd_lock);
232 
233 	return (0);
234 }
235 
236 static int
xpg4_fixup(queue_t * qp,dev_t * devp,struct stdata * stp,cred_t * crp)237 xpg4_fixup(queue_t *qp, dev_t *devp, struct stdata *stp, cred_t *crp)
238 {
239 	static const char *ptsmods[] = {
240 	    "ptem", "ldterm", "ttcompat"
241 	};
242 	dev_t dummydev = *devp;
243 	struct strioctl strioc;
244 	zoneid_t zoneid;
245 	int32_t rval;
246 	uint_t i;
247 
248 	/*
249 	 * Push modules required for the slave PTY to have terminal
250 	 * semantics out of the box; this is required by XPG4v2.
251 	 * These three modules are flagged as single-instance so that
252 	 * the system will never end up with duplicate copies pushed
253 	 * onto a stream.
254 	 */
255 
256 	zoneid = crgetzoneid(crp);
257 	for (i = 0; i < ARRAY_SIZE(ptsmods); i++) {
258 		int error;
259 
260 		error = push_mod(qp, &dummydev, stp, ptsmods[i], 0,
261 		    crp, zoneid);
262 		if (error != 0)
263 			return (error);
264 	}
265 
266 	/*
267 	 * Send PTSSTTY down the stream
268 	 */
269 
270 	strioc.ic_cmd = PTSSTTY;
271 	strioc.ic_timout = 0;
272 	strioc.ic_len = 0;
273 	strioc.ic_dp = NULL;
274 
275 	(void) strdoioctl(stp, &strioc, FNATIVE, K_TO_K, crp, &rval);
276 
277 	return (0);
278 }
279 
280 /*
281  * Open a stream device.
282  */
283 int
stropen(vnode_t * vp,dev_t * devp,int flag,cred_t * crp)284 stropen(vnode_t *vp, dev_t *devp, int flag, cred_t *crp)
285 {
286 	struct stdata *stp;
287 	queue_t *qp;
288 	int s;
289 	dev_t dummydev, savedev;
290 	struct autopush *ap;
291 	struct dlautopush dlap;
292 	int error = 0;
293 	ssize_t	rmin, rmax;
294 	int cloneopen;
295 	queue_t *brq;
296 	major_t major;
297 	str_stack_t *ss;
298 	zoneid_t zoneid;
299 	uint_t anchor;
300 
301 	/*
302 	 * If the stream already exists, wait for any open in progress
303 	 * to complete, then call the open function of each module and
304 	 * driver in the stream.  Otherwise create the stream.
305 	 */
306 	TRACE_1(TR_FAC_STREAMS_FR, TR_STROPEN, "stropen:%p", vp);
307 retry:
308 	mutex_enter(&vp->v_lock);
309 	if ((stp = vp->v_stream) != NULL) {
310 
311 		/*
312 		 * Waiting for stream to be created to device
313 		 * due to another open.
314 		 */
315 		mutex_exit(&vp->v_lock);
316 
317 		if (STRMATED(stp)) {
318 			struct stdata *strmatep = stp->sd_mate;
319 
320 			STRLOCKMATES(stp);
321 			if (strmatep->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
322 				if (flag & (FNDELAY|FNONBLOCK)) {
323 					error = EAGAIN;
324 					mutex_exit(&strmatep->sd_lock);
325 					goto ckreturn;
326 				}
327 				mutex_exit(&stp->sd_lock);
328 				if (!cv_wait_sig(&strmatep->sd_monitor,
329 				    &strmatep->sd_lock)) {
330 					error = EINTR;
331 					mutex_exit(&strmatep->sd_lock);
332 					mutex_enter(&stp->sd_lock);
333 					goto ckreturn;
334 				}
335 				mutex_exit(&strmatep->sd_lock);
336 				goto retry;
337 			}
338 			if (stp->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
339 				if (flag & (FNDELAY|FNONBLOCK)) {
340 					error = EAGAIN;
341 					mutex_exit(&strmatep->sd_lock);
342 					goto ckreturn;
343 				}
344 				mutex_exit(&strmatep->sd_lock);
345 				if (!cv_wait_sig(&stp->sd_monitor,
346 				    &stp->sd_lock)) {
347 					error = EINTR;
348 					goto ckreturn;
349 				}
350 				mutex_exit(&stp->sd_lock);
351 				goto retry;
352 			}
353 
354 			if (stp->sd_flag & (STRDERR|STWRERR)) {
355 				error = EIO;
356 				mutex_exit(&strmatep->sd_lock);
357 				goto ckreturn;
358 			}
359 
360 			stp->sd_flag |= STWOPEN;
361 			STRUNLOCKMATES(stp);
362 		} else {
363 			mutex_enter(&stp->sd_lock);
364 			if (stp->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
365 				if (flag & (FNDELAY|FNONBLOCK)) {
366 					error = EAGAIN;
367 					goto ckreturn;
368 				}
369 				if (!cv_wait_sig(&stp->sd_monitor,
370 				    &stp->sd_lock)) {
371 					error = EINTR;
372 					goto ckreturn;
373 				}
374 				mutex_exit(&stp->sd_lock);
375 				goto retry;  /* could be clone! */
376 			}
377 
378 			if (stp->sd_flag & (STRDERR|STWRERR)) {
379 				error = EIO;
380 				goto ckreturn;
381 			}
382 
383 			stp->sd_flag |= STWOPEN;
384 			mutex_exit(&stp->sd_lock);
385 		}
386 
387 		/*
388 		 * Open all modules and devices down stream to notify
389 		 * that another user is streaming.  For modules, set the
390 		 * last argument to MODOPEN and do not pass any open flags.
391 		 * Ignore dummydev since this is not the first open.
392 		 */
393 		claimstr(stp->sd_wrq);
394 		qp = stp->sd_wrq;
395 		while (_SAMESTR(qp)) {
396 			qp = qp->q_next;
397 			if ((error = qreopen(_RD(qp), devp, flag, crp)) != 0)
398 				break;
399 		}
400 		releasestr(stp->sd_wrq);
401 		mutex_enter(&stp->sd_lock);
402 		stp->sd_flag &= ~(STRHUP|STWOPEN|STRDERR|STWRERR);
403 		stp->sd_rerror = 0;
404 		stp->sd_werror = 0;
405 ckreturn:
406 		cv_broadcast(&stp->sd_monitor);
407 		mutex_exit(&stp->sd_lock);
408 		return (error);
409 	}
410 
411 	/*
412 	 * This vnode isn't streaming.  SPECFS already
413 	 * checked for multiple vnodes pointing to the
414 	 * same stream, so create a stream to the driver.
415 	 */
416 	qp = allocq();
417 	stp = shalloc(qp);
418 
419 	/*
420 	 * Initialize stream head.  shalloc() has given us
421 	 * exclusive access, and we have the vnode locked;
422 	 * we can do whatever we want with stp.
423 	 */
424 	stp->sd_flag = STWOPEN;
425 	stp->sd_siglist = NULL;
426 	stp->sd_pollist.ph_list = NULL;
427 	stp->sd_sigflags = 0;
428 	stp->sd_mark = NULL;
429 	stp->sd_closetime = STRTIMOUT;
430 	stp->sd_sidp = NULL;
431 	stp->sd_pgidp = NULL;
432 	stp->sd_vnode = vp;
433 	stp->sd_pvnode = NULL;
434 	stp->sd_rerror = 0;
435 	stp->sd_werror = 0;
436 	stp->sd_wroff = 0;
437 	stp->sd_tail = 0;
438 	stp->sd_iocblk = NULL;
439 	stp->sd_cmdblk = NULL;
440 	stp->sd_pushcnt = 0;
441 	stp->sd_qn_minpsz = 0;
442 	stp->sd_qn_maxpsz = INFPSZ - 1;	/* used to check for initialization */
443 	stp->sd_maxblk = INFPSZ;
444 	qp->q_ptr = _WR(qp)->q_ptr = stp;
445 	STREAM(qp) = STREAM(_WR(qp)) = stp;
446 	vp->v_stream = stp;
447 	mutex_exit(&vp->v_lock);
448 	if (vp->v_type == VFIFO) {
449 		stp->sd_flag |= OLDNDELAY;
450 		/*
451 		 * This means, both for pipes and fifos
452 		 * strwrite will send SIGPIPE if the other
453 		 * end is closed. For putmsg it depends
454 		 * on whether it is a XPG4_2 application
455 		 * or not
456 		 */
457 		stp->sd_wput_opt = SW_SIGPIPE;
458 
459 		/* setq might sleep in kmem_alloc - avoid holding locks. */
460 		setq(qp, &fifo_strdata, &fifo_stwdata, NULL, QMTSAFE,
461 		    SQ_CI|SQ_CO, B_FALSE);
462 
463 		set_qend(qp);
464 		stp->sd_strtab = fifo_getinfo();
465 		_WR(qp)->q_nfsrv = _WR(qp);
466 		qp->q_nfsrv = qp;
467 		/*
468 		 * Wake up others that are waiting for stream to be created.
469 		 */
470 		mutex_enter(&stp->sd_lock);
471 		/*
472 		 * nothing is be pushed on stream yet, so
473 		 * optimized stream head packetsizes are just that
474 		 * of the read queue
475 		 */
476 		stp->sd_qn_minpsz = qp->q_minpsz;
477 		stp->sd_qn_maxpsz = qp->q_maxpsz;
478 		stp->sd_flag &= ~STWOPEN;
479 		goto fifo_opendone;
480 	}
481 	/* setq might sleep in kmem_alloc - avoid holding locks. */
482 	setq(qp, &strdata, &stwdata, NULL, QMTSAFE, SQ_CI|SQ_CO, B_FALSE);
483 
484 	set_qend(qp);
485 
486 	/*
487 	 * Open driver and create stream to it (via qattach).
488 	 */
489 	savedev = *devp;
490 	cloneopen = (getmajor(*devp) == clone_major);
491 	if ((error = qattach(qp, devp, flag, crp, NULL, B_FALSE)) != 0) {
492 		mutex_enter(&vp->v_lock);
493 		vp->v_stream = NULL;
494 		mutex_exit(&vp->v_lock);
495 		mutex_enter(&stp->sd_lock);
496 		cv_broadcast(&stp->sd_monitor);
497 		mutex_exit(&stp->sd_lock);
498 		freeq(_RD(qp));
499 		shfree(stp);
500 		return (error);
501 	}
502 	/*
503 	 * Set sd_strtab after open in order to handle clonable drivers
504 	 */
505 	stp->sd_strtab = STREAMSTAB(getmajor(*devp));
506 
507 	/*
508 	 * Historical note: dummydev used to be be prior to the initial
509 	 * open (via qattach above), which made the value seen
510 	 * inconsistent between an I_PUSH and an autopush of a module.
511 	 */
512 	dummydev = *devp;
513 
514 	/*
515 	 * For clone open of old style (Q not associated) network driver,
516 	 * push DRMODNAME module to handle DL_ATTACH/DL_DETACH
517 	 */
518 	brq = _RD(_WR(qp)->q_next);
519 	major = getmajor(*devp);
520 	if (push_drcompat && cloneopen && NETWORK_DRV(major) &&
521 	    ((brq->q_flag & _QASSOCIATED) == 0)) {
522 		if (push_mod(qp, &dummydev, stp, DRMODNAME, 0, crp, 0) != 0)
523 			cmn_err(CE_WARN, "cannot push " DRMODNAME
524 			    " streams module");
525 	}
526 
527 	if (!NETWORK_DRV(major)) {
528 		savedev = *devp;
529 	} else {
530 		/*
531 		 * For network devices, process differently based on the
532 		 * return value from dld_autopush():
533 		 *
534 		 *   0: the passed-in device points to a GLDv3 datalink with
535 		 *   per-link autopush configuration; use that configuration
536 		 *   and ignore any per-driver autopush configuration.
537 		 *
538 		 *   1: the passed-in device points to a physical GLDv3
539 		 *   datalink without per-link autopush configuration.  The
540 		 *   passed in device was changed to refer to the actual
541 		 *   physical device (if it's not already); we use that new
542 		 *   device to look up any per-driver autopush configuration.
543 		 *
544 		 *   -1: neither of the above cases applied; use the initial
545 		 *   device to look up any per-driver autopush configuration.
546 		 */
547 		switch (dld_autopush(&savedev, &dlap)) {
548 		case 0:
549 			zoneid = crgetzoneid(crp);
550 			for (s = 0; s < dlap.dap_npush; s++) {
551 				error = push_mod(qp, &dummydev, stp,
552 				    dlap.dap_aplist[s], dlap.dap_anchor, crp,
553 				    zoneid);
554 				if (error != 0)
555 					break;
556 			}
557 			goto opendone;
558 		case 1:
559 			break;
560 		case -1:
561 			savedev = *devp;
562 			break;
563 		}
564 	}
565 	/*
566 	 * Find the autopush configuration based on "savedev". Start with the
567 	 * global zone. If not found check in the local zone.
568 	 */
569 	zoneid = GLOBAL_ZONEID;
570 retryap:
571 	ss = netstack_find_by_stackid(zoneid_to_netstackid(zoneid))->
572 	    netstack_str;
573 	if ((ap = sad_ap_find_by_dev(savedev, ss)) == NULL) {
574 		netstack_rele(ss->ss_netstack);
575 		if (zoneid == GLOBAL_ZONEID) {
576 			/*
577 			 * None found. Also look in the zone's autopush table.
578 			 */
579 			zoneid = crgetzoneid(crp);
580 			if (zoneid != GLOBAL_ZONEID)
581 				goto retryap;
582 		}
583 		goto opendone;
584 	}
585 	anchor = ap->ap_anchor;
586 	zoneid = crgetzoneid(crp);
587 	for (s = 0; s < ap->ap_npush; s++) {
588 		error = push_mod(qp, &dummydev, stp, ap->ap_list[s],
589 		    anchor, crp, zoneid);
590 		if (error != 0)
591 			break;
592 	}
593 	sad_ap_rele(ap, ss);
594 	netstack_rele(ss->ss_netstack);
595 
596 opendone:
597 
598 	if (error == 0 &&
599 	    (stp->sd_flag & (STRISTTY|STRXPG4TTY)) == (STRISTTY|STRXPG4TTY)) {
600 		error = xpg4_fixup(qp, devp, stp, crp);
601 	}
602 
603 	/*
604 	 * let specfs know that open failed part way through
605 	 */
606 	if (error != 0) {
607 		mutex_enter(&stp->sd_lock);
608 		stp->sd_flag |= STREOPENFAIL;
609 		mutex_exit(&stp->sd_lock);
610 	}
611 
612 	/*
613 	 * Wake up others that are waiting for stream to be created.
614 	 */
615 	mutex_enter(&stp->sd_lock);
616 	stp->sd_flag &= ~STWOPEN;
617 
618 	/*
619 	 * As a performance concern we are caching the values of
620 	 * q_minpsz and q_maxpsz of the module below the stream
621 	 * head in the stream head.
622 	 */
623 	mutex_enter(QLOCK(stp->sd_wrq->q_next));
624 	rmin = stp->sd_wrq->q_next->q_minpsz;
625 	rmax = stp->sd_wrq->q_next->q_maxpsz;
626 	mutex_exit(QLOCK(stp->sd_wrq->q_next));
627 
628 	/* do this processing here as a performance concern */
629 	if (strmsgsz != 0) {
630 		if (rmax == INFPSZ)
631 			rmax = strmsgsz;
632 		else
633 			rmax = MIN(strmsgsz, rmax);
634 	}
635 
636 	mutex_enter(QLOCK(stp->sd_wrq));
637 	stp->sd_qn_minpsz = rmin;
638 	stp->sd_qn_maxpsz = rmax;
639 	mutex_exit(QLOCK(stp->sd_wrq));
640 
641 fifo_opendone:
642 	cv_broadcast(&stp->sd_monitor);
643 	mutex_exit(&stp->sd_lock);
644 	return (error);
645 }
646 
647 static int strsink(queue_t *, mblk_t *);
648 static struct qinit deadrend = {
649 	strsink, NULL, NULL, NULL, NULL, &strm_info, NULL
650 };
651 static struct qinit deadwend = {
652 	NULL, NULL, NULL, NULL, NULL, &stwm_info, NULL
653 };
654 
655 /*
656  * Close a stream.
657  * This is called from closef() on the last close of an open stream.
658  * Strclean() will already have removed the siglist and pollist
659  * information, so all that remains is to remove all multiplexor links
660  * for the stream, pop all the modules (and the driver), and free the
661  * stream structure.
662  */
663 
664 int
strclose(struct vnode * vp,int flag,cred_t * crp)665 strclose(struct vnode *vp, int flag, cred_t *crp)
666 {
667 	struct stdata *stp;
668 	queue_t *qp;
669 	int rval;
670 	int freestp = 1;
671 	queue_t *rmq;
672 
673 	TRACE_1(TR_FAC_STREAMS_FR,
674 	    TR_STRCLOSE, "strclose:%p", vp);
675 	ASSERT(vp->v_stream);
676 
677 	stp = vp->v_stream;
678 	ASSERT(!(stp->sd_flag & STPLEX));
679 	qp = stp->sd_wrq;
680 
681 	/*
682 	 * Needed so that strpoll will return non-zero for this fd.
683 	 * Note that with POLLNOERR STRHUP does still cause POLLHUP.
684 	 */
685 	mutex_enter(&stp->sd_lock);
686 	stp->sd_flag |= STRHUP;
687 	mutex_exit(&stp->sd_lock);
688 
689 	/*
690 	 * If the registered process or process group did not have an
691 	 * open instance of this stream then strclean would not be
692 	 * called. Thus at the time of closing all remaining siglist entries
693 	 * are removed.
694 	 */
695 	if (stp->sd_siglist != NULL)
696 		strcleanall(vp);
697 
698 	ASSERT(stp->sd_siglist == NULL);
699 	ASSERT(stp->sd_sigflags == 0);
700 
701 	if (STRMATED(stp)) {
702 		struct stdata *strmatep = stp->sd_mate;
703 		int waited = 1;
704 
705 		STRLOCKMATES(stp);
706 		while (waited) {
707 			waited = 0;
708 			while (stp->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
709 				mutex_exit(&strmatep->sd_lock);
710 				cv_wait(&stp->sd_monitor, &stp->sd_lock);
711 				mutex_exit(&stp->sd_lock);
712 				STRLOCKMATES(stp);
713 				waited = 1;
714 			}
715 			while (strmatep->sd_flag &
716 			    (STWOPEN|STRCLOSE|STRPLUMB)) {
717 				mutex_exit(&stp->sd_lock);
718 				cv_wait(&strmatep->sd_monitor,
719 				    &strmatep->sd_lock);
720 				mutex_exit(&strmatep->sd_lock);
721 				STRLOCKMATES(stp);
722 				waited = 1;
723 			}
724 		}
725 		stp->sd_flag |= STRCLOSE;
726 		STRUNLOCKMATES(stp);
727 	} else {
728 		mutex_enter(&stp->sd_lock);
729 		stp->sd_flag |= STRCLOSE;
730 		mutex_exit(&stp->sd_lock);
731 	}
732 
733 	ASSERT(qp->q_first == NULL);	/* No more delayed write */
734 
735 	/* Check if an I_LINK was ever done on this stream */
736 	if (stp->sd_flag & STRHASLINKS) {
737 		netstack_t *ns;
738 		str_stack_t *ss;
739 
740 		ns = netstack_find_by_cred(crp);
741 		ASSERT(ns != NULL);
742 		ss = ns->netstack_str;
743 		ASSERT(ss != NULL);
744 
745 		(void) munlinkall(stp, LINKCLOSE|LINKNORMAL, crp, &rval, ss);
746 		netstack_rele(ss->ss_netstack);
747 	}
748 
749 	while (_SAMESTR(qp)) {
750 		/*
751 		 * Holding sd_lock prevents q_next from changing in
752 		 * this stream.
753 		 */
754 		mutex_enter(&stp->sd_lock);
755 		if (!(flag & (FNDELAY|FNONBLOCK)) && (stp->sd_closetime > 0)) {
756 
757 			/*
758 			 * sleep until awakened by strwsrv() or timeout
759 			 */
760 			for (;;) {
761 				mutex_enter(QLOCK(qp->q_next));
762 				if (!(qp->q_next->q_mblkcnt)) {
763 					mutex_exit(QLOCK(qp->q_next));
764 					break;
765 				}
766 				stp->sd_flag |= WSLEEP;
767 
768 				/* ensure strwsrv gets enabled */
769 				qp->q_next->q_flag |= QWANTW;
770 				mutex_exit(QLOCK(qp->q_next));
771 				/* get out if we timed out or recv'd a signal */
772 				if (str_cv_wait(&qp->q_wait, &stp->sd_lock,
773 				    stp->sd_closetime, 0) <= 0) {
774 					break;
775 				}
776 			}
777 			stp->sd_flag &= ~WSLEEP;
778 		}
779 		mutex_exit(&stp->sd_lock);
780 
781 		rmq = qp->q_next;
782 		if (rmq->q_flag & QISDRV) {
783 			ASSERT(!_SAMESTR(rmq));
784 			wait_sq_svc(_RD(qp)->q_syncq);
785 		}
786 
787 		qdetach(_RD(rmq), 1, flag, crp, B_FALSE);
788 	}
789 
790 	/*
791 	 * Since we call pollwakeup in close() now, the poll list should
792 	 * be empty in most cases. The only exception is the layered devices
793 	 * (e.g. the console drivers with redirection modules pushed on top
794 	 * of it).  We have to do this after calling qdetach() because
795 	 * the redirection module won't have torn down the console
796 	 * redirection until after qdetach() has been invoked.
797 	 */
798 	if (stp->sd_pollist.ph_list != NULL) {
799 		pollwakeup(&stp->sd_pollist, POLLERR);
800 		pollhead_clean(&stp->sd_pollist);
801 	}
802 	ASSERT(stp->sd_pollist.ph_list == NULL);
803 	ASSERT(stp->sd_sidp == NULL);
804 	ASSERT(stp->sd_pgidp == NULL);
805 
806 	/* Prevent qenable from re-enabling the stream head queue */
807 	disable_svc(_RD(qp));
808 
809 	/*
810 	 * Wait until service procedure of each queue is
811 	 * run, if QINSERVICE is set.
812 	 */
813 	wait_svc(_RD(qp));
814 
815 	/*
816 	 * Now, flush both queues.
817 	 */
818 	flushq(_RD(qp), FLUSHALL);
819 	flushq(qp, FLUSHALL);
820 
821 	/*
822 	 * If the write queue of the stream head is pointing to a
823 	 * read queue, we have a twisted stream.  If the read queue
824 	 * is alive, convert the stream head queues into a dead end.
825 	 * If the read queue is dead, free the dead pair.
826 	 */
827 	if (qp->q_next && !_SAMESTR(qp)) {
828 		if (qp->q_next->q_qinfo == &deadrend) {	/* half-closed pipe */
829 			flushq(qp->q_next, FLUSHALL); /* ensure no message */
830 			shfree(qp->q_next->q_stream);
831 			freeq(qp->q_next);
832 			freeq(_RD(qp));
833 		} else if (qp->q_next == _RD(qp)) {	/* fifo */
834 			freeq(_RD(qp));
835 		} else {				/* pipe */
836 			freestp = 0;
837 			/*
838 			 * The q_info pointers are never accessed when
839 			 * SQLOCK is held.
840 			 */
841 			ASSERT(qp->q_syncq == _RD(qp)->q_syncq);
842 			mutex_enter(SQLOCK(qp->q_syncq));
843 			qp->q_qinfo = &deadwend;
844 			_RD(qp)->q_qinfo = &deadrend;
845 			mutex_exit(SQLOCK(qp->q_syncq));
846 		}
847 	} else {
848 		freeq(_RD(qp)); /* free stream head queue pair */
849 	}
850 
851 	mutex_enter(&vp->v_lock);
852 	if (stp->sd_iocblk) {
853 		if (stp->sd_iocblk != (mblk_t *)-1) {
854 			freemsg(stp->sd_iocblk);
855 		}
856 		stp->sd_iocblk = NULL;
857 	}
858 	stp->sd_vnode = stp->sd_pvnode = NULL;
859 	vp->v_stream = NULL;
860 	mutex_exit(&vp->v_lock);
861 	mutex_enter(&stp->sd_lock);
862 	freemsg(stp->sd_cmdblk);
863 	stp->sd_cmdblk = NULL;
864 	stp->sd_flag &= ~STRCLOSE;
865 	cv_broadcast(&stp->sd_monitor);
866 	mutex_exit(&stp->sd_lock);
867 
868 	if (freestp)
869 		shfree(stp);
870 	return (0);
871 }
872 
873 static int
strsink(queue_t * q,mblk_t * bp)874 strsink(queue_t *q, mblk_t *bp)
875 {
876 	struct copyresp *resp;
877 
878 	switch (bp->b_datap->db_type) {
879 	case M_FLUSH:
880 		if ((*bp->b_rptr & FLUSHW) && !(bp->b_flag & MSGNOLOOP)) {
881 			*bp->b_rptr &= ~FLUSHR;
882 			bp->b_flag |= MSGNOLOOP;
883 			/*
884 			 * Protect against the driver passing up
885 			 * messages after it has done a qprocsoff.
886 			 */
887 			if (_OTHERQ(q)->q_next == NULL)
888 				freemsg(bp);
889 			else
890 				qreply(q, bp);
891 		} else {
892 			freemsg(bp);
893 		}
894 		break;
895 
896 	case M_COPYIN:
897 	case M_COPYOUT:
898 		if (bp->b_cont) {
899 			freemsg(bp->b_cont);
900 			bp->b_cont = NULL;
901 		}
902 		bp->b_datap->db_type = M_IOCDATA;
903 		bp->b_wptr = bp->b_rptr + sizeof (struct copyresp);
904 		resp = (struct copyresp *)bp->b_rptr;
905 		resp->cp_rval = (caddr_t)1;	/* failure */
906 		/*
907 		 * Protect against the driver passing up
908 		 * messages after it has done a qprocsoff.
909 		 */
910 		if (_OTHERQ(q)->q_next == NULL)
911 			freemsg(bp);
912 		else
913 			qreply(q, bp);
914 		break;
915 
916 	case M_IOCTL:
917 		if (bp->b_cont) {
918 			freemsg(bp->b_cont);
919 			bp->b_cont = NULL;
920 		}
921 		bp->b_datap->db_type = M_IOCNAK;
922 		/*
923 		 * Protect against the driver passing up
924 		 * messages after it has done a qprocsoff.
925 		 */
926 		if (_OTHERQ(q)->q_next == NULL)
927 			freemsg(bp);
928 		else
929 			qreply(q, bp);
930 		break;
931 
932 	default:
933 		freemsg(bp);
934 		break;
935 	}
936 
937 	return (0);
938 }
939 
940 /*
941  * Clean up after a process when it closes a stream.  This is called
942  * from closef for all closes, whereas strclose is called only for the
943  * last close on a stream.  The siglist is scanned for entries for the
944  * current process, and these are removed.
945  */
946 void
strclean(struct vnode * vp)947 strclean(struct vnode *vp)
948 {
949 	strsig_t *ssp, *pssp, *tssp;
950 	stdata_t *stp;
951 	int update = 0;
952 
953 	TRACE_1(TR_FAC_STREAMS_FR,
954 	    TR_STRCLEAN, "strclean:%p", vp);
955 	stp = vp->v_stream;
956 	pssp = NULL;
957 	mutex_enter(&stp->sd_lock);
958 	ssp = stp->sd_siglist;
959 	while (ssp) {
960 		if (ssp->ss_pidp == curproc->p_pidp) {
961 			tssp = ssp->ss_next;
962 			if (pssp)
963 				pssp->ss_next = tssp;
964 			else
965 				stp->sd_siglist = tssp;
966 			mutex_enter(&pidlock);
967 			PID_RELE(ssp->ss_pidp);
968 			mutex_exit(&pidlock);
969 			kmem_free(ssp, sizeof (strsig_t));
970 			update = 1;
971 			ssp = tssp;
972 		} else {
973 			pssp = ssp;
974 			ssp = ssp->ss_next;
975 		}
976 	}
977 	if (update) {
978 		stp->sd_sigflags = 0;
979 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
980 			stp->sd_sigflags |= ssp->ss_events;
981 	}
982 	mutex_exit(&stp->sd_lock);
983 }
984 
985 /*
986  * Used on the last close to remove any remaining items on the siglist.
987  * These could be present on the siglist due to I_ESETSIG calls that
988  * use process groups or processed that do not have an open file descriptor
989  * for this stream (Such entries would not be removed by strclean).
990  */
991 static void
strcleanall(struct vnode * vp)992 strcleanall(struct vnode *vp)
993 {
994 	strsig_t *ssp, *nssp;
995 	stdata_t *stp;
996 
997 	stp = vp->v_stream;
998 	mutex_enter(&stp->sd_lock);
999 	ssp = stp->sd_siglist;
1000 	stp->sd_siglist = NULL;
1001 	while (ssp) {
1002 		nssp = ssp->ss_next;
1003 		mutex_enter(&pidlock);
1004 		PID_RELE(ssp->ss_pidp);
1005 		mutex_exit(&pidlock);
1006 		kmem_free(ssp, sizeof (strsig_t));
1007 		ssp = nssp;
1008 	}
1009 	stp->sd_sigflags = 0;
1010 	mutex_exit(&stp->sd_lock);
1011 }
1012 
1013 /*
1014  * Retrieve the next message from the logical stream head read queue
1015  * using either rwnext (if sync stream) or getq_noenab.
1016  * It is the callers responsibility to call qbackenable after
1017  * it is finished with the message. The caller should not call
1018  * qbackenable until after any putback calls to avoid spurious backenabling.
1019  */
1020 mblk_t *
strget(struct stdata * stp,queue_t * q,struct uio * uiop,int first,int * errorp)1021 strget(struct stdata *stp, queue_t *q, struct uio *uiop, int first,
1022     int *errorp)
1023 {
1024 	mblk_t *bp;
1025 	int error;
1026 	ssize_t rbytes = 0;
1027 
1028 	/* Holding sd_lock prevents the read queue from changing  */
1029 	ASSERT(MUTEX_HELD(&stp->sd_lock));
1030 
1031 	if (uiop != NULL && stp->sd_struiordq != NULL &&
1032 	    q->q_first == NULL &&
1033 	    (!first || (stp->sd_wakeq & RSLEEP))) {
1034 		/*
1035 		 * Stream supports rwnext() for the read side.
1036 		 * If this is the first time we're called by e.g. strread
1037 		 * only do the downcall if there is a deferred wakeup
1038 		 * (registered in sd_wakeq).
1039 		 */
1040 		struiod_t uiod;
1041 		struct iovec buf[IOV_MAX_STACK];
1042 		int iovlen = 0;
1043 
1044 		if (first)
1045 			stp->sd_wakeq &= ~RSLEEP;
1046 
1047 		if (uiop->uio_iovcnt > IOV_MAX_STACK) {
1048 			iovlen = uiop->uio_iovcnt * sizeof (iovec_t);
1049 			uiod.d_iov = kmem_alloc(iovlen, KM_SLEEP);
1050 		} else {
1051 			uiod.d_iov = buf;
1052 		}
1053 
1054 		(void) uiodup(uiop, &uiod.d_uio, uiod.d_iov, uiop->uio_iovcnt);
1055 		uiod.d_mp = 0;
1056 		/*
1057 		 * Mark that a thread is in rwnext on the read side
1058 		 * to prevent strrput from nacking ioctls immediately.
1059 		 * When the last concurrent rwnext returns
1060 		 * the ioctls are nack'ed.
1061 		 */
1062 		ASSERT(MUTEX_HELD(&stp->sd_lock));
1063 		stp->sd_struiodnak++;
1064 		/*
1065 		 * Note: rwnext will drop sd_lock.
1066 		 */
1067 		error = rwnext(q, &uiod);
1068 		ASSERT(MUTEX_NOT_HELD(&stp->sd_lock));
1069 		mutex_enter(&stp->sd_lock);
1070 		stp->sd_struiodnak--;
1071 		while (stp->sd_struiodnak == 0 &&
1072 		    ((bp = stp->sd_struionak) != NULL)) {
1073 			stp->sd_struionak = bp->b_next;
1074 			bp->b_next = NULL;
1075 			bp->b_datap->db_type = M_IOCNAK;
1076 			/*
1077 			 * Protect against the driver passing up
1078 			 * messages after it has done a qprocsoff.
1079 			 */
1080 			if (_OTHERQ(q)->q_next == NULL)
1081 				freemsg(bp);
1082 			else {
1083 				mutex_exit(&stp->sd_lock);
1084 				qreply(q, bp);
1085 				mutex_enter(&stp->sd_lock);
1086 			}
1087 		}
1088 		ASSERT(MUTEX_HELD(&stp->sd_lock));
1089 		if (error == 0 || error == EWOULDBLOCK) {
1090 			if ((bp = uiod.d_mp) != NULL) {
1091 				*errorp = 0;
1092 				ASSERT(MUTEX_HELD(&stp->sd_lock));
1093 				if (iovlen != 0)
1094 					kmem_free(uiod.d_iov, iovlen);
1095 				return (bp);
1096 			}
1097 			error = 0;
1098 		} else if (error == EINVAL) {
1099 			/*
1100 			 * The stream plumbing must have
1101 			 * changed while we were away, so
1102 			 * just turn off rwnext()s.
1103 			 */
1104 			error = 0;
1105 		} else if (error == EBUSY) {
1106 			/*
1107 			 * The module might have data in transit using putnext
1108 			 * Fall back on waiting + getq.
1109 			 */
1110 			error = 0;
1111 		} else {
1112 			*errorp = error;
1113 			ASSERT(MUTEX_HELD(&stp->sd_lock));
1114 			if (iovlen != 0)
1115 				kmem_free(uiod.d_iov, iovlen);
1116 			return (NULL);
1117 		}
1118 
1119 		if (iovlen != 0)
1120 			kmem_free(uiod.d_iov, iovlen);
1121 
1122 		/*
1123 		 * Try a getq in case a rwnext() generated mblk
1124 		 * has bubbled up via strrput().
1125 		 */
1126 	}
1127 	*errorp = 0;
1128 	ASSERT(MUTEX_HELD(&stp->sd_lock));
1129 
1130 	/*
1131 	 * If we have a valid uio, try and use this as a guide for how
1132 	 * many bytes to retrieve from the queue via getq_noenab().
1133 	 * Doing this can avoid unneccesary counting of overlong
1134 	 * messages in putback(). We currently only do this for sockets
1135 	 * and only if there is no sd_rputdatafunc hook.
1136 	 *
1137 	 * The sd_rputdatafunc hook transforms the entire message
1138 	 * before any bytes in it can be given to a client. So, rbytes
1139 	 * must be 0 if there is a hook.
1140 	 */
1141 	if ((uiop != NULL) && (stp->sd_vnode->v_type == VSOCK) &&
1142 	    (stp->sd_rputdatafunc == NULL))
1143 		rbytes = uiop->uio_resid;
1144 
1145 	return (getq_noenab(q, rbytes));
1146 }
1147 
1148 /*
1149  * Copy out the message pointed to by `bp' into the uio pointed to by `uiop'.
1150  * If the message does not fit in the uio the remainder of it is returned;
1151  * otherwise NULL is returned.  Any embedded zero-length mblk_t's are
1152  * consumed, even if uio_resid reaches zero.  On error, `*errorp' is set to
1153  * the error code, the message is consumed, and NULL is returned.
1154  */
1155 static mblk_t *
struiocopyout(mblk_t * bp,struct uio * uiop,int * errorp)1156 struiocopyout(mblk_t *bp, struct uio *uiop, int *errorp)
1157 {
1158 	int error;
1159 	ptrdiff_t n;
1160 	mblk_t *nbp;
1161 
1162 	ASSERT(bp->b_wptr >= bp->b_rptr);
1163 
1164 	do {
1165 		if ((n = MIN(uiop->uio_resid, MBLKL(bp))) != 0) {
1166 			ASSERT(n > 0);
1167 
1168 			error = uiomove(bp->b_rptr, n, UIO_READ, uiop);
1169 			if (error != 0) {
1170 				freemsg(bp);
1171 				*errorp = error;
1172 				return (NULL);
1173 			}
1174 		}
1175 
1176 		bp->b_rptr += n;
1177 		while (bp != NULL && (bp->b_rptr >= bp->b_wptr)) {
1178 			nbp = bp;
1179 			bp = bp->b_cont;
1180 			freeb(nbp);
1181 		}
1182 	} while (bp != NULL && uiop->uio_resid > 0);
1183 
1184 	*errorp = 0;
1185 	return (bp);
1186 }
1187 
1188 /*
1189  * Read a stream according to the mode flags in sd_flag:
1190  *
1191  * (default mode)		- Byte stream, msg boundaries are ignored
1192  * RD_MSGDIS (msg discard)	- Read on msg boundaries and throw away
1193  *				any data remaining in msg
1194  * RD_MSGNODIS (msg non-discard) - Read on msg boundaries and put back
1195  *				any remaining data on head of read queue
1196  *
1197  * Consume readable messages on the front of the queue until
1198  * ttolwp(curthread)->lwp_count
1199  * is satisfied, the readable messages are exhausted, or a message
1200  * boundary is reached in a message mode.  If no data was read and
1201  * the stream was not opened with the NDELAY flag, block until data arrives.
1202  * Otherwise return the data read and update the count.
1203  *
1204  * In default mode a 0 length message signifies end-of-file and terminates
1205  * a read in progress.  The 0 length message is removed from the queue
1206  * only if it is the only message read (no data is read).
1207  *
1208  * An attempt to read an M_PROTO or M_PCPROTO message results in an
1209  * EBADMSG error return, unless either RD_PROTDAT or RD_PROTDIS are set.
1210  * If RD_PROTDAT is set, M_PROTO and M_PCPROTO messages are read as data.
1211  * If RD_PROTDIS is set, the M_PROTO and M_PCPROTO parts of the message
1212  * are unlinked from and M_DATA blocks in the message, the protos are
1213  * thrown away, and the data is read.
1214  */
1215 /* ARGSUSED */
1216 int
strread(struct vnode * vp,struct uio * uiop,cred_t * crp)1217 strread(struct vnode *vp, struct uio *uiop, cred_t *crp)
1218 {
1219 	struct stdata *stp;
1220 	mblk_t *bp, *nbp;
1221 	queue_t *q;
1222 	int error = 0;
1223 	uint_t old_sd_flag;
1224 	int first;
1225 	char rflg;
1226 	uint_t mark;		/* Contains MSG*MARK and _LASTMARK */
1227 #define	_LASTMARK	0x8000	/* Distinct from MSG*MARK */
1228 	short delim;
1229 	unsigned char pri = 0;
1230 	char waitflag;
1231 	unsigned char type;
1232 
1233 	TRACE_1(TR_FAC_STREAMS_FR,
1234 	    TR_STRREAD_ENTER, "strread:%p", vp);
1235 	ASSERT(vp->v_stream);
1236 	stp = vp->v_stream;
1237 
1238 	mutex_enter(&stp->sd_lock);
1239 
1240 	if ((error = i_straccess(stp, JCREAD)) != 0) {
1241 		mutex_exit(&stp->sd_lock);
1242 		return (error);
1243 	}
1244 
1245 	if (stp->sd_flag & (STRDERR|STPLEX)) {
1246 		error = strgeterr(stp, STRDERR|STPLEX, 0);
1247 		if (error != 0) {
1248 			mutex_exit(&stp->sd_lock);
1249 			return (error);
1250 		}
1251 	}
1252 
1253 	/*
1254 	 * Loop terminates when uiop->uio_resid == 0.
1255 	 */
1256 	rflg = 0;
1257 	waitflag = READWAIT;
1258 	q = _RD(stp->sd_wrq);
1259 	for (;;) {
1260 		ASSERT(MUTEX_HELD(&stp->sd_lock));
1261 		old_sd_flag = stp->sd_flag;
1262 		mark = 0;
1263 		delim = 0;
1264 		first = 1;
1265 		while ((bp = strget(stp, q, uiop, first, &error)) == NULL) {
1266 			int done = 0;
1267 
1268 			ASSERT(MUTEX_HELD(&stp->sd_lock));
1269 
1270 			if (error != 0)
1271 				goto oops;
1272 
1273 			if (stp->sd_flag & (STRHUP|STREOF)) {
1274 				goto oops;
1275 			}
1276 			if (rflg && !(stp->sd_flag & STRDELIM)) {
1277 				goto oops;
1278 			}
1279 			/*
1280 			 * If a read(fd,buf,0) has been done, there is no
1281 			 * need to sleep. We always have zero bytes to
1282 			 * return.
1283 			 */
1284 			if (uiop->uio_resid == 0) {
1285 				goto oops;
1286 			}
1287 
1288 			qbackenable(q, 0);
1289 
1290 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRREAD_WAIT,
1291 			    "strread calls strwaitq:%p, %p, %p",
1292 			    vp, uiop, crp);
1293 			if ((error = strwaitq(stp, waitflag, uiop->uio_resid,
1294 			    uiop->uio_fmode, -1, &done)) != 0 || done) {
1295 				TRACE_3(TR_FAC_STREAMS_FR, TR_STRREAD_DONE,
1296 				    "strread error or done:%p, %p, %p",
1297 				    vp, uiop, crp);
1298 				if ((uiop->uio_fmode & FNDELAY) &&
1299 				    (stp->sd_flag & OLDNDELAY) &&
1300 				    (error == EAGAIN))
1301 					error = 0;
1302 				goto oops;
1303 			}
1304 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRREAD_AWAKE,
1305 			    "strread awakes:%p, %p, %p", vp, uiop, crp);
1306 			if ((error = i_straccess(stp, JCREAD)) != 0) {
1307 				goto oops;
1308 			}
1309 			first = 0;
1310 		}
1311 
1312 		ASSERT(MUTEX_HELD(&stp->sd_lock));
1313 		ASSERT(bp);
1314 		pri = bp->b_band;
1315 		/*
1316 		 * Extract any mark information. If the message is not
1317 		 * completely consumed this information will be put in the mblk
1318 		 * that is putback.
1319 		 * If MSGMARKNEXT is set and the message is completely consumed
1320 		 * the STRATMARK flag will be set below. Likewise, if
1321 		 * MSGNOTMARKNEXT is set and the message is
1322 		 * completely consumed STRNOTATMARK will be set.
1323 		 *
1324 		 * For some unknown reason strread only breaks the read at the
1325 		 * last mark.
1326 		 */
1327 		mark = bp->b_flag & (MSGMARK | MSGMARKNEXT | MSGNOTMARKNEXT);
1328 		ASSERT((mark & (MSGMARKNEXT|MSGNOTMARKNEXT)) !=
1329 		    (MSGMARKNEXT|MSGNOTMARKNEXT));
1330 		if (mark != 0 && bp == stp->sd_mark) {
1331 			if (rflg) {
1332 				putback(stp, q, bp, pri);
1333 				goto oops;
1334 			}
1335 			mark |= _LASTMARK;
1336 			stp->sd_mark = NULL;
1337 		}
1338 		if ((stp->sd_flag & STRDELIM) && (bp->b_flag & MSGDELIM))
1339 			delim = 1;
1340 		mutex_exit(&stp->sd_lock);
1341 
1342 		if (STREAM_NEEDSERVICE(stp))
1343 			stream_runservice(stp);
1344 
1345 		type = bp->b_datap->db_type;
1346 
1347 		switch (type) {
1348 
1349 		case M_DATA:
1350 ismdata:
1351 			if (msgnodata(bp)) {
1352 				if (mark || delim) {
1353 					freemsg(bp);
1354 				} else if (rflg) {
1355 
1356 					/*
1357 					 * If already read data put zero
1358 					 * length message back on queue else
1359 					 * free msg and return 0.
1360 					 */
1361 					bp->b_band = pri;
1362 					mutex_enter(&stp->sd_lock);
1363 					putback(stp, q, bp, pri);
1364 					mutex_exit(&stp->sd_lock);
1365 				} else {
1366 					freemsg(bp);
1367 				}
1368 				error =  0;
1369 				goto oops1;
1370 			}
1371 
1372 			rflg = 1;
1373 			waitflag |= NOINTR;
1374 			bp = struiocopyout(bp, uiop, &error);
1375 			if (error != 0)
1376 				goto oops1;
1377 
1378 			mutex_enter(&stp->sd_lock);
1379 			if (bp) {
1380 				/*
1381 				 * Have remaining data in message.
1382 				 * Free msg if in discard mode.
1383 				 */
1384 				if (stp->sd_read_opt & RD_MSGDIS) {
1385 					freemsg(bp);
1386 				} else {
1387 					bp->b_band = pri;
1388 					if ((mark & _LASTMARK) &&
1389 					    (stp->sd_mark == NULL))
1390 						stp->sd_mark = bp;
1391 					bp->b_flag |= mark & ~_LASTMARK;
1392 					if (delim)
1393 						bp->b_flag |= MSGDELIM;
1394 					if (msgnodata(bp))
1395 						freemsg(bp);
1396 					else
1397 						putback(stp, q, bp, pri);
1398 				}
1399 			} else {
1400 				/*
1401 				 * Consumed the complete message.
1402 				 * Move the MSG*MARKNEXT information
1403 				 * to the stream head just in case
1404 				 * the read queue becomes empty.
1405 				 *
1406 				 * If the stream head was at the mark
1407 				 * (STRATMARK) before we dropped sd_lock above
1408 				 * and some data was consumed then we have
1409 				 * moved past the mark thus STRATMARK is
1410 				 * cleared. However, if a message arrived in
1411 				 * strrput during the copyout above causing
1412 				 * STRATMARK to be set we can not clear that
1413 				 * flag.
1414 				 */
1415 				if (mark &
1416 				    (MSGMARKNEXT|MSGNOTMARKNEXT|MSGMARK)) {
1417 					if (mark & MSGMARKNEXT) {
1418 						stp->sd_flag &= ~STRNOTATMARK;
1419 						stp->sd_flag |= STRATMARK;
1420 					} else if (mark & MSGNOTMARKNEXT) {
1421 						stp->sd_flag &= ~STRATMARK;
1422 						stp->sd_flag |= STRNOTATMARK;
1423 					} else {
1424 						stp->sd_flag &=
1425 						    ~(STRATMARK|STRNOTATMARK);
1426 					}
1427 				} else if (rflg && (old_sd_flag & STRATMARK)) {
1428 					stp->sd_flag &= ~STRATMARK;
1429 				}
1430 			}
1431 
1432 			/*
1433 			 * Check for signal messages at the front of the read
1434 			 * queue and generate the signal(s) if appropriate.
1435 			 * The only signal that can be on queue is M_SIG at
1436 			 * this point.
1437 			 */
1438 			while ((((bp = q->q_first)) != NULL) &&
1439 			    (bp->b_datap->db_type == M_SIG)) {
1440 				bp = getq_noenab(q, 0);
1441 				/*
1442 				 * sd_lock is held so the content of the
1443 				 * read queue can not change.
1444 				 */
1445 				ASSERT(bp != NULL && DB_TYPE(bp) == M_SIG);
1446 				strsignal_nolock(stp, *bp->b_rptr, bp->b_band);
1447 				mutex_exit(&stp->sd_lock);
1448 				freemsg(bp);
1449 				if (STREAM_NEEDSERVICE(stp))
1450 					stream_runservice(stp);
1451 				mutex_enter(&stp->sd_lock);
1452 			}
1453 
1454 			if ((uiop->uio_resid == 0) || (mark & _LASTMARK) ||
1455 			    delim ||
1456 			    (stp->sd_read_opt & (RD_MSGDIS|RD_MSGNODIS))) {
1457 				goto oops;
1458 			}
1459 			continue;
1460 
1461 		case M_SIG:
1462 			strsignal(stp, *bp->b_rptr, (int32_t)bp->b_band);
1463 			freemsg(bp);
1464 			mutex_enter(&stp->sd_lock);
1465 			continue;
1466 
1467 		case M_PROTO:
1468 		case M_PCPROTO:
1469 			/*
1470 			 * Only data messages are readable.
1471 			 * Any others generate an error, unless
1472 			 * RD_PROTDIS or RD_PROTDAT is set.
1473 			 */
1474 			if (stp->sd_read_opt & RD_PROTDAT) {
1475 				for (nbp = bp; nbp; nbp = nbp->b_next) {
1476 					if ((nbp->b_datap->db_type ==
1477 					    M_PROTO) ||
1478 					    (nbp->b_datap->db_type ==
1479 					    M_PCPROTO)) {
1480 						nbp->b_datap->db_type = M_DATA;
1481 					} else {
1482 						break;
1483 					}
1484 				}
1485 				/*
1486 				 * clear stream head hi pri flag based on
1487 				 * first message
1488 				 */
1489 				if (type == M_PCPROTO) {
1490 					mutex_enter(&stp->sd_lock);
1491 					stp->sd_flag &= ~STRPRI;
1492 					mutex_exit(&stp->sd_lock);
1493 				}
1494 				goto ismdata;
1495 			} else if (stp->sd_read_opt & RD_PROTDIS) {
1496 				/*
1497 				 * discard non-data messages
1498 				 */
1499 				while (bp &&
1500 				    ((bp->b_datap->db_type == M_PROTO) ||
1501 				    (bp->b_datap->db_type == M_PCPROTO))) {
1502 					nbp = unlinkb(bp);
1503 					freeb(bp);
1504 					bp = nbp;
1505 				}
1506 				/*
1507 				 * clear stream head hi pri flag based on
1508 				 * first message
1509 				 */
1510 				if (type == M_PCPROTO) {
1511 					mutex_enter(&stp->sd_lock);
1512 					stp->sd_flag &= ~STRPRI;
1513 					mutex_exit(&stp->sd_lock);
1514 				}
1515 				if (bp) {
1516 					bp->b_band = pri;
1517 					goto ismdata;
1518 				} else {
1519 					break;
1520 				}
1521 			}
1522 			/* FALLTHRU */
1523 		case M_PASSFP:
1524 			if ((bp->b_datap->db_type == M_PASSFP) &&
1525 			    (stp->sd_read_opt & RD_PROTDIS)) {
1526 				freemsg(bp);
1527 				break;
1528 			}
1529 			mutex_enter(&stp->sd_lock);
1530 			putback(stp, q, bp, pri);
1531 			mutex_exit(&stp->sd_lock);
1532 			if (rflg == 0)
1533 				error = EBADMSG;
1534 			goto oops1;
1535 
1536 		default:
1537 			/*
1538 			 * Garbage on stream head read queue.
1539 			 */
1540 			cmn_err(CE_WARN, "bad %x found at stream head\n",
1541 			    bp->b_datap->db_type);
1542 			freemsg(bp);
1543 			goto oops1;
1544 		}
1545 		mutex_enter(&stp->sd_lock);
1546 	}
1547 oops:
1548 	mutex_exit(&stp->sd_lock);
1549 oops1:
1550 	qbackenable(q, pri);
1551 	return (error);
1552 #undef	_LASTMARK
1553 }
1554 
1555 /*
1556  * Default processing of M_PROTO/M_PCPROTO messages.
1557  * Determine which wakeups and signals are needed.
1558  * This can be replaced by a user-specified procedure for kernel users
1559  * of STREAMS.
1560  */
1561 /* ARGSUSED */
1562 mblk_t *
strrput_proto(vnode_t * vp,mblk_t * mp,strwakeup_t * wakeups,strsigset_t * firstmsgsigs,strsigset_t * allmsgsigs,strpollset_t * pollwakeups)1563 strrput_proto(vnode_t *vp, mblk_t *mp,
1564     strwakeup_t *wakeups, strsigset_t *firstmsgsigs,
1565     strsigset_t *allmsgsigs, strpollset_t *pollwakeups)
1566 {
1567 	*wakeups = RSLEEP;
1568 	*allmsgsigs = 0;
1569 
1570 	switch (mp->b_datap->db_type) {
1571 	case M_PROTO:
1572 		if (mp->b_band == 0) {
1573 			*firstmsgsigs = S_INPUT | S_RDNORM;
1574 			*pollwakeups = POLLIN | POLLRDNORM;
1575 		} else {
1576 			*firstmsgsigs = S_INPUT | S_RDBAND;
1577 			*pollwakeups = POLLIN | POLLRDBAND;
1578 		}
1579 		break;
1580 	case M_PCPROTO:
1581 		*firstmsgsigs = S_HIPRI;
1582 		*pollwakeups = POLLPRI;
1583 		break;
1584 	}
1585 	return (mp);
1586 }
1587 
1588 /*
1589  * Default processing of everything but M_DATA, M_PROTO, M_PCPROTO and
1590  * M_PASSFP messages.
1591  * Determine which wakeups and signals are needed.
1592  * This can be replaced by a user-specified procedure for kernel users
1593  * of STREAMS.
1594  */
1595 /* ARGSUSED */
1596 mblk_t *
strrput_misc(vnode_t * vp,mblk_t * mp,strwakeup_t * wakeups,strsigset_t * firstmsgsigs,strsigset_t * allmsgsigs,strpollset_t * pollwakeups)1597 strrput_misc(vnode_t *vp, mblk_t *mp,
1598     strwakeup_t *wakeups, strsigset_t *firstmsgsigs,
1599     strsigset_t *allmsgsigs, strpollset_t *pollwakeups)
1600 {
1601 	*wakeups = 0;
1602 	*firstmsgsigs = 0;
1603 	*allmsgsigs = 0;
1604 	*pollwakeups = 0;
1605 	return (mp);
1606 }
1607 
1608 /*
1609  * Stream read put procedure.  Called from downstream driver/module
1610  * with messages for the stream head.  Data, protocol, and in-stream
1611  * signal messages are placed on the queue, others are handled directly.
1612  */
1613 int
strrput(queue_t * q,mblk_t * bp)1614 strrput(queue_t *q, mblk_t *bp)
1615 {
1616 	struct stdata	*stp;
1617 	ulong_t		rput_opt;
1618 	strwakeup_t	wakeups;
1619 	strsigset_t	firstmsgsigs;	/* Signals if first message on queue */
1620 	strsigset_t	allmsgsigs;	/* Signals for all messages */
1621 	strsigset_t	signals;	/* Signals events to generate */
1622 	strpollset_t	pollwakeups;
1623 	mblk_t		*nextbp;
1624 	uchar_t		band = 0;
1625 	int		hipri_sig;
1626 
1627 	stp = (struct stdata *)q->q_ptr;
1628 	/*
1629 	 * Use rput_opt for optimized access to the SR_ flags except
1630 	 * SR_POLLIN. That flag has to be checked under sd_lock since it
1631 	 * is modified by strpoll().
1632 	 */
1633 	rput_opt = stp->sd_rput_opt;
1634 
1635 	ASSERT(qclaimed(q));
1636 	TRACE_2(TR_FAC_STREAMS_FR, TR_STRRPUT_ENTER,
1637 	    "strrput called with message type:q %p bp %p", q, bp);
1638 
1639 	/*
1640 	 * Perform initial processing and pass to the parameterized functions.
1641 	 */
1642 	ASSERT(bp->b_next == NULL);
1643 
1644 	switch (bp->b_datap->db_type) {
1645 	case M_DATA:
1646 		/*
1647 		 * sockfs is the only consumer of STREOF and when it is set,
1648 		 * it implies that the receiver is not interested in receiving
1649 		 * any more data, hence the mblk is freed to prevent unnecessary
1650 		 * message queueing at the stream head.
1651 		 */
1652 		if (stp->sd_flag == STREOF) {
1653 			freemsg(bp);
1654 			return (0);
1655 		}
1656 		if ((rput_opt & SR_IGN_ZEROLEN) &&
1657 		    bp->b_rptr == bp->b_wptr && msgnodata(bp)) {
1658 			/*
1659 			 * Ignore zero-length M_DATA messages. These might be
1660 			 * generated by some transports.
1661 			 * The zero-length M_DATA messages, even if they
1662 			 * are ignored, should effect the atmark tracking and
1663 			 * should wake up a thread sleeping in strwaitmark.
1664 			 */
1665 			mutex_enter(&stp->sd_lock);
1666 			if (bp->b_flag & MSGMARKNEXT) {
1667 				/*
1668 				 * Record the position of the mark either
1669 				 * in q_last or in STRATMARK.
1670 				 */
1671 				if (q->q_last != NULL) {
1672 					q->q_last->b_flag &= ~MSGNOTMARKNEXT;
1673 					q->q_last->b_flag |= MSGMARKNEXT;
1674 				} else {
1675 					stp->sd_flag &= ~STRNOTATMARK;
1676 					stp->sd_flag |= STRATMARK;
1677 				}
1678 			} else if (bp->b_flag & MSGNOTMARKNEXT) {
1679 				/*
1680 				 * Record that this is not the position of
1681 				 * the mark either in q_last or in
1682 				 * STRNOTATMARK.
1683 				 */
1684 				if (q->q_last != NULL) {
1685 					q->q_last->b_flag &= ~MSGMARKNEXT;
1686 					q->q_last->b_flag |= MSGNOTMARKNEXT;
1687 				} else {
1688 					stp->sd_flag &= ~STRATMARK;
1689 					stp->sd_flag |= STRNOTATMARK;
1690 				}
1691 			}
1692 			if (stp->sd_flag & RSLEEP) {
1693 				stp->sd_flag &= ~RSLEEP;
1694 				cv_broadcast(&q->q_wait);
1695 			}
1696 			mutex_exit(&stp->sd_lock);
1697 			freemsg(bp);
1698 			return (0);
1699 		}
1700 		wakeups = RSLEEP;
1701 		if (bp->b_band == 0) {
1702 			firstmsgsigs = S_INPUT | S_RDNORM;
1703 			pollwakeups = POLLIN | POLLRDNORM;
1704 		} else {
1705 			firstmsgsigs = S_INPUT | S_RDBAND;
1706 			pollwakeups = POLLIN | POLLRDBAND;
1707 		}
1708 		if (rput_opt & SR_SIGALLDATA)
1709 			allmsgsigs = firstmsgsigs;
1710 		else
1711 			allmsgsigs = 0;
1712 
1713 		mutex_enter(&stp->sd_lock);
1714 		if ((rput_opt & SR_CONSOL_DATA) &&
1715 		    (q->q_last != NULL) &&
1716 		    (bp->b_flag & (MSGMARK|MSGDELIM)) == 0) {
1717 			/*
1718 			 * Consolidate an M_DATA message onto an M_DATA,
1719 			 * M_PROTO, or M_PCPROTO by merging it with q_last.
1720 			 * The consolidation does not take place if
1721 			 * the old message is marked with either of the
1722 			 * marks or the delim flag or if the new
1723 			 * message is marked with MSGMARK. The MSGMARK
1724 			 * check is needed to handle the odd semantics of
1725 			 * MSGMARK where essentially the whole message
1726 			 * is to be treated as marked.
1727 			 * Carry any MSGMARKNEXT  and MSGNOTMARKNEXT from the
1728 			 * new message to the front of the b_cont chain.
1729 			 */
1730 			mblk_t *lbp = q->q_last;
1731 			unsigned char db_type = lbp->b_datap->db_type;
1732 
1733 			if ((db_type == M_DATA || db_type == M_PROTO ||
1734 			    db_type == M_PCPROTO) &&
1735 			    !(lbp->b_flag & (MSGDELIM|MSGMARK|MSGMARKNEXT))) {
1736 				rmvq_noenab(q, lbp);
1737 				/*
1738 				 * The first message in the b_cont list
1739 				 * tracks MSGMARKNEXT and MSGNOTMARKNEXT.
1740 				 * We need to handle the case where we
1741 				 * are appending:
1742 				 *
1743 				 * 1) a MSGMARKNEXT to a MSGNOTMARKNEXT.
1744 				 * 2) a MSGMARKNEXT to a plain message.
1745 				 * 3) a MSGNOTMARKNEXT to a plain message
1746 				 * 4) a MSGNOTMARKNEXT to a MSGNOTMARKNEXT
1747 				 *    message.
1748 				 *
1749 				 * Thus we never append a MSGMARKNEXT or
1750 				 * MSGNOTMARKNEXT to a MSGMARKNEXT message.
1751 				 */
1752 				if (bp->b_flag & MSGMARKNEXT) {
1753 					lbp->b_flag |= MSGMARKNEXT;
1754 					lbp->b_flag &= ~MSGNOTMARKNEXT;
1755 					bp->b_flag &= ~MSGMARKNEXT;
1756 				} else if (bp->b_flag & MSGNOTMARKNEXT) {
1757 					lbp->b_flag |= MSGNOTMARKNEXT;
1758 					bp->b_flag &= ~MSGNOTMARKNEXT;
1759 				}
1760 
1761 				linkb(lbp, bp);
1762 				bp = lbp;
1763 				/*
1764 				 * The new message logically isn't the first
1765 				 * even though the q_first check below thinks
1766 				 * it is. Clear the firstmsgsigs to make it
1767 				 * not appear to be first.
1768 				 */
1769 				firstmsgsigs = 0;
1770 			}
1771 		}
1772 		break;
1773 
1774 	case M_PASSFP:
1775 		wakeups = RSLEEP;
1776 		allmsgsigs = 0;
1777 		if (bp->b_band == 0) {
1778 			firstmsgsigs = S_INPUT | S_RDNORM;
1779 			pollwakeups = POLLIN | POLLRDNORM;
1780 		} else {
1781 			firstmsgsigs = S_INPUT | S_RDBAND;
1782 			pollwakeups = POLLIN | POLLRDBAND;
1783 		}
1784 		mutex_enter(&stp->sd_lock);
1785 		break;
1786 
1787 	case M_PROTO:
1788 	case M_PCPROTO:
1789 		ASSERT(stp->sd_rprotofunc != NULL);
1790 		bp = (stp->sd_rprotofunc)(stp->sd_vnode, bp,
1791 		    &wakeups, &firstmsgsigs, &allmsgsigs, &pollwakeups);
1792 #define	ALLSIG	(S_INPUT|S_HIPRI|S_OUTPUT|S_MSG|S_ERROR|S_HANGUP|S_RDNORM|\
1793 		S_WRNORM|S_RDBAND|S_WRBAND|S_BANDURG)
1794 #define	ALLPOLL	(POLLIN|POLLPRI|POLLOUT|POLLRDNORM|POLLWRNORM|POLLRDBAND|\
1795 		POLLWRBAND)
1796 
1797 		ASSERT((wakeups & ~(RSLEEP|WSLEEP)) == 0);
1798 		ASSERT((firstmsgsigs & ~ALLSIG) == 0);
1799 		ASSERT((allmsgsigs & ~ALLSIG) == 0);
1800 		ASSERT((pollwakeups & ~ALLPOLL) == 0);
1801 
1802 		mutex_enter(&stp->sd_lock);
1803 		break;
1804 
1805 	default:
1806 		ASSERT(stp->sd_rmiscfunc != NULL);
1807 		bp = (stp->sd_rmiscfunc)(stp->sd_vnode, bp,
1808 		    &wakeups, &firstmsgsigs, &allmsgsigs, &pollwakeups);
1809 		ASSERT((wakeups & ~(RSLEEP|WSLEEP)) == 0);
1810 		ASSERT((firstmsgsigs & ~ALLSIG) == 0);
1811 		ASSERT((allmsgsigs & ~ALLSIG) == 0);
1812 		ASSERT((pollwakeups & ~ALLPOLL) == 0);
1813 #undef	ALLSIG
1814 #undef	ALLPOLL
1815 		mutex_enter(&stp->sd_lock);
1816 		break;
1817 	}
1818 	ASSERT(MUTEX_HELD(&stp->sd_lock));
1819 
1820 	/* By default generate superset of signals */
1821 	signals = (firstmsgsigs | allmsgsigs);
1822 
1823 	/*
1824 	 * The  proto and misc functions can return multiple messages
1825 	 * as a b_next chain. Such messages are processed separately.
1826 	 */
1827 one_more:
1828 	hipri_sig = 0;
1829 	if (bp == NULL) {
1830 		nextbp = NULL;
1831 	} else {
1832 		nextbp = bp->b_next;
1833 		bp->b_next = NULL;
1834 
1835 		switch (bp->b_datap->db_type) {
1836 		case M_PCPROTO:
1837 			/*
1838 			 * Only one priority protocol message is allowed at the
1839 			 * stream head at a time.
1840 			 */
1841 			if (stp->sd_flag & STRPRI) {
1842 				TRACE_0(TR_FAC_STREAMS_FR, TR_STRRPUT_PROTERR,
1843 				    "M_PCPROTO already at head");
1844 				freemsg(bp);
1845 				mutex_exit(&stp->sd_lock);
1846 				goto done;
1847 			}
1848 			stp->sd_flag |= STRPRI;
1849 			hipri_sig = 1;
1850 			/* FALLTHRU */
1851 		case M_DATA:
1852 		case M_PROTO:
1853 		case M_PASSFP:
1854 			band = bp->b_band;
1855 			/*
1856 			 * Marking doesn't work well when messages
1857 			 * are marked in more than one band.  We only
1858 			 * remember the last message received, even if
1859 			 * it is placed on the queue ahead of other
1860 			 * marked messages.
1861 			 */
1862 			if (bp->b_flag & MSGMARK)
1863 				stp->sd_mark = bp;
1864 			(void) putq(q, bp);
1865 
1866 			/*
1867 			 * If message is a PCPROTO message, always use
1868 			 * firstmsgsigs to determine if a signal should be
1869 			 * sent as strrput is the only place to send
1870 			 * signals for PCPROTO. Other messages are based on
1871 			 * the STRGETINPROG flag. The flag determines if
1872 			 * strrput or (k)strgetmsg will be responsible for
1873 			 * sending the signals, in the firstmsgsigs case.
1874 			 */
1875 			if ((hipri_sig == 1) ||
1876 			    (((stp->sd_flag & STRGETINPROG) == 0) &&
1877 			    (q->q_first == bp)))
1878 				signals = (firstmsgsigs | allmsgsigs);
1879 			else
1880 				signals = allmsgsigs;
1881 			break;
1882 
1883 		default:
1884 			mutex_exit(&stp->sd_lock);
1885 			(void) strrput_nondata(q, bp);
1886 			mutex_enter(&stp->sd_lock);
1887 			break;
1888 		}
1889 	}
1890 	ASSERT(MUTEX_HELD(&stp->sd_lock));
1891 	/*
1892 	 * Wake sleeping read/getmsg and cancel deferred wakeup
1893 	 */
1894 	if (wakeups & RSLEEP)
1895 		stp->sd_wakeq &= ~RSLEEP;
1896 
1897 	wakeups &= stp->sd_flag;
1898 	if (wakeups & RSLEEP) {
1899 		stp->sd_flag &= ~RSLEEP;
1900 		cv_broadcast(&q->q_wait);
1901 	}
1902 	if (wakeups & WSLEEP) {
1903 		stp->sd_flag &= ~WSLEEP;
1904 		cv_broadcast(&_WR(q)->q_wait);
1905 	}
1906 
1907 	if (pollwakeups != 0) {
1908 		if (pollwakeups == (POLLIN | POLLRDNORM)) {
1909 			/*
1910 			 * Can't use rput_opt since it was not
1911 			 * read when sd_lock was held and SR_POLLIN is changed
1912 			 * by strpoll() under sd_lock.
1913 			 */
1914 			if (!(stp->sd_rput_opt & SR_POLLIN))
1915 				goto no_pollwake;
1916 			stp->sd_rput_opt &= ~SR_POLLIN;
1917 		}
1918 		mutex_exit(&stp->sd_lock);
1919 		pollwakeup(&stp->sd_pollist, pollwakeups);
1920 		mutex_enter(&stp->sd_lock);
1921 	}
1922 no_pollwake:
1923 
1924 	/*
1925 	 * strsendsig can handle multiple signals with a
1926 	 * single call.
1927 	 */
1928 	if (stp->sd_sigflags & signals)
1929 		strsendsig(stp->sd_siglist, signals, band, 0);
1930 	mutex_exit(&stp->sd_lock);
1931 
1932 
1933 done:
1934 	if (nextbp == NULL)
1935 		return (0);
1936 
1937 	/*
1938 	 * Any signals were handled the first time.
1939 	 * Wakeups and pollwakeups are redone to avoid any race
1940 	 * conditions - all the messages are not queued until the
1941 	 * last message has been processed by strrput.
1942 	 */
1943 	bp = nextbp;
1944 	signals = firstmsgsigs = allmsgsigs = 0;
1945 	mutex_enter(&stp->sd_lock);
1946 	goto one_more;
1947 }
1948 
1949 static void
log_dupioc(queue_t * rq,mblk_t * bp)1950 log_dupioc(queue_t *rq, mblk_t *bp)
1951 {
1952 	queue_t *wq, *qp;
1953 	char *modnames, *mnp, *dname;
1954 	size_t maxmodstr;
1955 	boolean_t islast;
1956 
1957 	/*
1958 	 * Allocate a buffer large enough to hold the names of nstrpush modules
1959 	 * and one driver, with spaces between and NUL terminator.  If we can't
1960 	 * get memory, then we'll just log the driver name.
1961 	 */
1962 	maxmodstr = nstrpush * (FMNAMESZ + 1);
1963 	mnp = modnames = kmem_alloc(maxmodstr, KM_NOSLEEP);
1964 
1965 	/* march down write side to print log message down to the driver */
1966 	wq = WR(rq);
1967 
1968 	/* make sure q_next doesn't shift around while we're grabbing data */
1969 	claimstr(wq);
1970 	qp = wq->q_next;
1971 	do {
1972 		dname = Q2NAME(qp);
1973 		islast = !SAMESTR(qp) || qp->q_next == NULL;
1974 		if (modnames == NULL) {
1975 			/*
1976 			 * If we don't have memory, then get the driver name in
1977 			 * the log where we can see it.  Note that memory
1978 			 * pressure is a possible cause of these sorts of bugs.
1979 			 */
1980 			if (islast) {
1981 				modnames = dname;
1982 				maxmodstr = 0;
1983 			}
1984 		} else {
1985 			mnp += snprintf(mnp, FMNAMESZ + 1, "%s", dname);
1986 			if (!islast)
1987 				*mnp++ = ' ';
1988 		}
1989 		qp = qp->q_next;
1990 	} while (!islast);
1991 	releasestr(wq);
1992 	/* Cannot happen unless stream head is corrupt. */
1993 	ASSERT(modnames != NULL);
1994 	(void) strlog(rq->q_qinfo->qi_minfo->mi_idnum, 0, 1,
1995 	    SL_CONSOLE|SL_TRACE|SL_ERROR,
1996 	    "Warning: stream %p received duplicate %X M_IOC%s; module list: %s",
1997 	    rq->q_ptr, ((struct iocblk *)bp->b_rptr)->ioc_cmd,
1998 	    (DB_TYPE(bp) == M_IOCACK ? "ACK" : "NAK"), modnames);
1999 	if (maxmodstr != 0)
2000 		kmem_free(modnames, maxmodstr);
2001 }
2002 
2003 int
strrput_nondata(queue_t * q,mblk_t * bp)2004 strrput_nondata(queue_t *q, mblk_t *bp)
2005 {
2006 	struct stdata *stp;
2007 	struct iocblk *iocbp;
2008 	struct stroptions *sop;
2009 	struct copyreq *reqp;
2010 	struct copyresp *resp;
2011 	unsigned char bpri;
2012 	unsigned char  flushed_already = 0;
2013 
2014 	stp = (struct stdata *)q->q_ptr;
2015 
2016 	ASSERT(!(stp->sd_flag & STPLEX));
2017 	ASSERT(qclaimed(q));
2018 
2019 	switch (bp->b_datap->db_type) {
2020 	case M_ERROR:
2021 		/*
2022 		 * An error has occurred downstream, the errno is in the first
2023 		 * bytes of the message.
2024 		 */
2025 		if ((bp->b_wptr - bp->b_rptr) == 2) {	/* New flavor */
2026 			unsigned char rw = 0;
2027 
2028 			mutex_enter(&stp->sd_lock);
2029 			if (*bp->b_rptr != NOERROR) {	/* read error */
2030 				if (*bp->b_rptr != 0) {
2031 					if (stp->sd_flag & STRDERR)
2032 						flushed_already |= FLUSHR;
2033 					stp->sd_flag |= STRDERR;
2034 					rw |= FLUSHR;
2035 				} else {
2036 					stp->sd_flag &= ~STRDERR;
2037 				}
2038 				stp->sd_rerror = *bp->b_rptr;
2039 			}
2040 			bp->b_rptr++;
2041 			if (*bp->b_rptr != NOERROR) {	/* write error */
2042 				if (*bp->b_rptr != 0) {
2043 					if (stp->sd_flag & STWRERR)
2044 						flushed_already |= FLUSHW;
2045 					stp->sd_flag |= STWRERR;
2046 					rw |= FLUSHW;
2047 				} else {
2048 					stp->sd_flag &= ~STWRERR;
2049 				}
2050 				stp->sd_werror = *bp->b_rptr;
2051 			}
2052 			if (rw) {
2053 				TRACE_2(TR_FAC_STREAMS_FR, TR_STRRPUT_WAKE,
2054 				    "strrput cv_broadcast:q %p, bp %p",
2055 				    q, bp);
2056 				cv_broadcast(&q->q_wait); /* readers */
2057 				cv_broadcast(&_WR(q)->q_wait); /* writers */
2058 				cv_broadcast(&stp->sd_monitor); /* ioctllers */
2059 
2060 				mutex_exit(&stp->sd_lock);
2061 				pollwakeup(&stp->sd_pollist, POLLERR);
2062 				mutex_enter(&stp->sd_lock);
2063 
2064 				if (stp->sd_sigflags & S_ERROR)
2065 					strsendsig(stp->sd_siglist, S_ERROR, 0,
2066 					    ((rw & FLUSHR) ? stp->sd_rerror :
2067 					    stp->sd_werror));
2068 				mutex_exit(&stp->sd_lock);
2069 				/*
2070 				 * Send the M_FLUSH only
2071 				 * for the first M_ERROR
2072 				 * message on the stream
2073 				 */
2074 				if (flushed_already == rw) {
2075 					freemsg(bp);
2076 					return (0);
2077 				}
2078 
2079 				bp->b_datap->db_type = M_FLUSH;
2080 				*bp->b_rptr = rw;
2081 				bp->b_wptr = bp->b_rptr + 1;
2082 				/*
2083 				 * Protect against the driver
2084 				 * passing up messages after
2085 				 * it has done a qprocsoff
2086 				 */
2087 				if (_OTHERQ(q)->q_next == NULL)
2088 					freemsg(bp);
2089 				else
2090 					qreply(q, bp);
2091 				return (0);
2092 			} else
2093 				mutex_exit(&stp->sd_lock);
2094 		} else if (*bp->b_rptr != 0) {		/* Old flavor */
2095 				if (stp->sd_flag & (STRDERR|STWRERR))
2096 					flushed_already = FLUSHRW;
2097 				mutex_enter(&stp->sd_lock);
2098 				stp->sd_flag |= (STRDERR|STWRERR);
2099 				stp->sd_rerror = *bp->b_rptr;
2100 				stp->sd_werror = *bp->b_rptr;
2101 				TRACE_2(TR_FAC_STREAMS_FR,
2102 				    TR_STRRPUT_WAKE2,
2103 				    "strrput wakeup #2:q %p, bp %p", q, bp);
2104 				cv_broadcast(&q->q_wait); /* the readers */
2105 				cv_broadcast(&_WR(q)->q_wait); /* the writers */
2106 				cv_broadcast(&stp->sd_monitor); /* ioctllers */
2107 
2108 				mutex_exit(&stp->sd_lock);
2109 				pollwakeup(&stp->sd_pollist, POLLERR);
2110 				mutex_enter(&stp->sd_lock);
2111 
2112 				if (stp->sd_sigflags & S_ERROR)
2113 					strsendsig(stp->sd_siglist, S_ERROR, 0,
2114 					    (stp->sd_werror ? stp->sd_werror :
2115 					    stp->sd_rerror));
2116 				mutex_exit(&stp->sd_lock);
2117 
2118 				/*
2119 				 * Send the M_FLUSH only
2120 				 * for the first M_ERROR
2121 				 * message on the stream
2122 				 */
2123 				if (flushed_already != FLUSHRW) {
2124 					bp->b_datap->db_type = M_FLUSH;
2125 					*bp->b_rptr = FLUSHRW;
2126 					/*
2127 					 * Protect against the driver passing up
2128 					 * messages after it has done a
2129 					 * qprocsoff.
2130 					 */
2131 					if (_OTHERQ(q)->q_next == NULL)
2132 						freemsg(bp);
2133 					else
2134 						qreply(q, bp);
2135 					return (0);
2136 				}
2137 		}
2138 		freemsg(bp);
2139 		return (0);
2140 
2141 	case M_HANGUP:
2142 
2143 		freemsg(bp);
2144 		mutex_enter(&stp->sd_lock);
2145 		stp->sd_werror = ENXIO;
2146 		stp->sd_flag |= STRHUP;
2147 		stp->sd_flag &= ~(WSLEEP|RSLEEP);
2148 
2149 		/*
2150 		 * send signal if controlling tty
2151 		 */
2152 
2153 		if (stp->sd_sidp) {
2154 			prsignal(stp->sd_sidp, SIGHUP);
2155 			if (stp->sd_sidp != stp->sd_pgidp)
2156 				pgsignal(stp->sd_pgidp, SIGTSTP);
2157 		}
2158 
2159 		/*
2160 		 * wake up read, write, and exception pollers and
2161 		 * reset wakeup mechanism.
2162 		 */
2163 		cv_broadcast(&q->q_wait);	/* the readers */
2164 		cv_broadcast(&_WR(q)->q_wait);	/* the writers */
2165 		cv_broadcast(&stp->sd_monitor);	/* the ioctllers */
2166 		strhup(stp);
2167 		mutex_exit(&stp->sd_lock);
2168 		return (0);
2169 
2170 	case M_UNHANGUP:
2171 		freemsg(bp);
2172 		mutex_enter(&stp->sd_lock);
2173 		stp->sd_werror = 0;
2174 		stp->sd_flag &= ~STRHUP;
2175 		mutex_exit(&stp->sd_lock);
2176 		return (0);
2177 
2178 	case M_SIG:
2179 		/*
2180 		 * Someone downstream wants to post a signal.  The
2181 		 * signal to post is contained in the first byte of the
2182 		 * message.  If the message would go on the front of
2183 		 * the queue, send a signal to the process group
2184 		 * (if not SIGPOLL) or to the siglist processes
2185 		 * (SIGPOLL).  If something is already on the queue,
2186 		 * OR if we are delivering a delayed suspend (*sigh*
2187 		 * another "tty" hack) and there's no one sleeping already,
2188 		 * just enqueue the message.
2189 		 */
2190 		mutex_enter(&stp->sd_lock);
2191 		if (q->q_first || (*bp->b_rptr == SIGTSTP &&
2192 		    !(stp->sd_flag & RSLEEP))) {
2193 			(void) putq(q, bp);
2194 			mutex_exit(&stp->sd_lock);
2195 			return (0);
2196 		}
2197 		mutex_exit(&stp->sd_lock);
2198 		/* FALLTHRU */
2199 
2200 	case M_PCSIG:
2201 		/*
2202 		 * Don't enqueue, just post the signal.
2203 		 */
2204 		strsignal(stp, *bp->b_rptr, 0L);
2205 		freemsg(bp);
2206 		return (0);
2207 
2208 	case M_CMD:
2209 		if (MBLKL(bp) != sizeof (cmdblk_t)) {
2210 			freemsg(bp);
2211 			return (0);
2212 		}
2213 
2214 		mutex_enter(&stp->sd_lock);
2215 		if (stp->sd_flag & STRCMDWAIT) {
2216 			ASSERT(stp->sd_cmdblk == NULL);
2217 			stp->sd_cmdblk = bp;
2218 			cv_broadcast(&stp->sd_monitor);
2219 			mutex_exit(&stp->sd_lock);
2220 		} else {
2221 			mutex_exit(&stp->sd_lock);
2222 			freemsg(bp);
2223 		}
2224 		return (0);
2225 
2226 	case M_FLUSH:
2227 		/*
2228 		 * Flush queues.  The indication of which queues to flush
2229 		 * is in the first byte of the message.  If the read queue
2230 		 * is specified, then flush it.  If FLUSHBAND is set, just
2231 		 * flush the band specified by the second byte of the message.
2232 		 *
2233 		 * If a module has issued a M_SETOPT to not flush hi
2234 		 * priority messages off of the stream head, then pass this
2235 		 * flag into the flushq code to preserve such messages.
2236 		 */
2237 
2238 		if (*bp->b_rptr & FLUSHR) {
2239 			mutex_enter(&stp->sd_lock);
2240 			if (*bp->b_rptr & FLUSHBAND) {
2241 				ASSERT((bp->b_wptr - bp->b_rptr) >= 2);
2242 				flushband(q, *(bp->b_rptr + 1), FLUSHALL);
2243 			} else
2244 				flushq_common(q, FLUSHALL,
2245 				    stp->sd_read_opt & RFLUSHPCPROT);
2246 			if ((q->q_first == NULL) ||
2247 			    (q->q_first->b_datap->db_type < QPCTL))
2248 				stp->sd_flag &= ~STRPRI;
2249 			else {
2250 				ASSERT(stp->sd_flag & STRPRI);
2251 			}
2252 			mutex_exit(&stp->sd_lock);
2253 		}
2254 		if ((*bp->b_rptr & FLUSHW) && !(bp->b_flag & MSGNOLOOP)) {
2255 			*bp->b_rptr &= ~FLUSHR;
2256 			bp->b_flag |= MSGNOLOOP;
2257 			/*
2258 			 * Protect against the driver passing up
2259 			 * messages after it has done a qprocsoff.
2260 			 */
2261 			if (_OTHERQ(q)->q_next == NULL)
2262 				freemsg(bp);
2263 			else
2264 				qreply(q, bp);
2265 			return (0);
2266 		}
2267 		freemsg(bp);
2268 		return (0);
2269 
2270 	case M_IOCACK:
2271 	case M_IOCNAK:
2272 		iocbp = (struct iocblk *)bp->b_rptr;
2273 		/*
2274 		 * If not waiting for ACK or NAK then just free msg.
2275 		 * If incorrect id sequence number then just free msg.
2276 		 * If already have ACK or NAK for user then this is a
2277 		 *    duplicate, display a warning and free the msg.
2278 		 */
2279 		mutex_enter(&stp->sd_lock);
2280 		if ((stp->sd_flag & IOCWAIT) == 0 || stp->sd_iocblk ||
2281 		    (stp->sd_iocid != iocbp->ioc_id)) {
2282 			/*
2283 			 * If the ACK/NAK is a dup, display a message
2284 			 * Dup is when sd_iocid == ioc_id, and
2285 			 * sd_iocblk == <valid ptr> or -1 (the former
2286 			 * is when an ioctl has been put on the stream
2287 			 * head, but has not yet been consumed, the
2288 			 * later is when it has been consumed).
2289 			 */
2290 			if ((stp->sd_iocid == iocbp->ioc_id) &&
2291 			    (stp->sd_iocblk != NULL)) {
2292 				log_dupioc(q, bp);
2293 			}
2294 			freemsg(bp);
2295 			mutex_exit(&stp->sd_lock);
2296 			return (0);
2297 		}
2298 
2299 		/*
2300 		 * Assign ACK or NAK to user and wake up.
2301 		 */
2302 		stp->sd_iocblk = bp;
2303 		cv_broadcast(&stp->sd_monitor);
2304 		mutex_exit(&stp->sd_lock);
2305 		return (0);
2306 
2307 	case M_COPYIN:
2308 	case M_COPYOUT:
2309 		reqp = (struct copyreq *)bp->b_rptr;
2310 
2311 		/*
2312 		 * If not waiting for ACK or NAK then just fail request.
2313 		 * If already have ACK, NAK, or copy request, then just
2314 		 * fail request.
2315 		 * If incorrect id sequence number then just fail request.
2316 		 */
2317 		mutex_enter(&stp->sd_lock);
2318 		if ((stp->sd_flag & IOCWAIT) == 0 || stp->sd_iocblk ||
2319 		    (stp->sd_iocid != reqp->cq_id)) {
2320 			if (bp->b_cont) {
2321 				freemsg(bp->b_cont);
2322 				bp->b_cont = NULL;
2323 			}
2324 			bp->b_datap->db_type = M_IOCDATA;
2325 			bp->b_wptr = bp->b_rptr + sizeof (struct copyresp);
2326 			resp = (struct copyresp *)bp->b_rptr;
2327 			resp->cp_rval = (caddr_t)1;	/* failure */
2328 			mutex_exit(&stp->sd_lock);
2329 			putnext(stp->sd_wrq, bp);
2330 			return (0);
2331 		}
2332 
2333 		/*
2334 		 * Assign copy request to user and wake up.
2335 		 */
2336 		stp->sd_iocblk = bp;
2337 		cv_broadcast(&stp->sd_monitor);
2338 		mutex_exit(&stp->sd_lock);
2339 		return (0);
2340 
2341 	case M_SETOPTS:
2342 		/*
2343 		 * Set stream head options (read option, write offset,
2344 		 * min/max packet size, and/or high/low water marks for
2345 		 * the read side only).
2346 		 */
2347 
2348 		bpri = 0;
2349 		sop = (struct stroptions *)bp->b_rptr;
2350 		mutex_enter(&stp->sd_lock);
2351 		if (sop->so_flags & SO_READOPT) {
2352 			switch (sop->so_readopt & RMODEMASK) {
2353 			case RNORM:
2354 				stp->sd_read_opt &= ~(RD_MSGDIS | RD_MSGNODIS);
2355 				break;
2356 
2357 			case RMSGD:
2358 				stp->sd_read_opt =
2359 				    ((stp->sd_read_opt & ~RD_MSGNODIS) |
2360 				    RD_MSGDIS);
2361 				break;
2362 
2363 			case RMSGN:
2364 				stp->sd_read_opt =
2365 				    ((stp->sd_read_opt & ~RD_MSGDIS) |
2366 				    RD_MSGNODIS);
2367 				break;
2368 			}
2369 			switch (sop->so_readopt & RPROTMASK) {
2370 			case RPROTNORM:
2371 				stp->sd_read_opt &= ~(RD_PROTDAT | RD_PROTDIS);
2372 				break;
2373 
2374 			case RPROTDAT:
2375 				stp->sd_read_opt =
2376 				    ((stp->sd_read_opt & ~RD_PROTDIS) |
2377 				    RD_PROTDAT);
2378 				break;
2379 
2380 			case RPROTDIS:
2381 				stp->sd_read_opt =
2382 				    ((stp->sd_read_opt & ~RD_PROTDAT) |
2383 				    RD_PROTDIS);
2384 				break;
2385 			}
2386 			switch (sop->so_readopt & RFLUSHMASK) {
2387 			case RFLUSHPCPROT:
2388 				/*
2389 				 * This sets the stream head to NOT flush
2390 				 * M_PCPROTO messages.
2391 				 */
2392 				stp->sd_read_opt |= RFLUSHPCPROT;
2393 				break;
2394 			}
2395 		}
2396 		if (sop->so_flags & SO_ERROPT) {
2397 			switch (sop->so_erropt & RERRMASK) {
2398 			case RERRNORM:
2399 				stp->sd_flag &= ~STRDERRNONPERSIST;
2400 				break;
2401 			case RERRNONPERSIST:
2402 				stp->sd_flag |= STRDERRNONPERSIST;
2403 				break;
2404 			}
2405 			switch (sop->so_erropt & WERRMASK) {
2406 			case WERRNORM:
2407 				stp->sd_flag &= ~STWRERRNONPERSIST;
2408 				break;
2409 			case WERRNONPERSIST:
2410 				stp->sd_flag |= STWRERRNONPERSIST;
2411 				break;
2412 			}
2413 		}
2414 		if (sop->so_flags & SO_COPYOPT) {
2415 			if (sop->so_copyopt & ZCVMSAFE) {
2416 				stp->sd_copyflag |= STZCVMSAFE;
2417 				stp->sd_copyflag &= ~STZCVMUNSAFE;
2418 			} else if (sop->so_copyopt & ZCVMUNSAFE) {
2419 				stp->sd_copyflag |= STZCVMUNSAFE;
2420 				stp->sd_copyflag &= ~STZCVMSAFE;
2421 			}
2422 
2423 			if (sop->so_copyopt & COPYCACHED) {
2424 				stp->sd_copyflag |= STRCOPYCACHED;
2425 			}
2426 		}
2427 		if (sop->so_flags & SO_WROFF)
2428 			stp->sd_wroff = sop->so_wroff;
2429 		if (sop->so_flags & SO_TAIL)
2430 			stp->sd_tail = sop->so_tail;
2431 		if (sop->so_flags & SO_MINPSZ)
2432 			q->q_minpsz = sop->so_minpsz;
2433 		if (sop->so_flags & SO_MAXPSZ)
2434 			q->q_maxpsz = sop->so_maxpsz;
2435 		if (sop->so_flags & SO_MAXBLK)
2436 			stp->sd_maxblk = sop->so_maxblk;
2437 		if (sop->so_flags & SO_HIWAT) {
2438 			if (sop->so_flags & SO_BAND) {
2439 				if (strqset(q, QHIWAT,
2440 				    sop->so_band, sop->so_hiwat)) {
2441 					cmn_err(CE_WARN, "strrput: could not "
2442 					    "allocate qband\n");
2443 				} else {
2444 					bpri = sop->so_band;
2445 				}
2446 			} else {
2447 				q->q_hiwat = sop->so_hiwat;
2448 			}
2449 		}
2450 		if (sop->so_flags & SO_LOWAT) {
2451 			if (sop->so_flags & SO_BAND) {
2452 				if (strqset(q, QLOWAT,
2453 				    sop->so_band, sop->so_lowat)) {
2454 					cmn_err(CE_WARN, "strrput: could not "
2455 					    "allocate qband\n");
2456 				} else {
2457 					bpri = sop->so_band;
2458 				}
2459 			} else {
2460 				q->q_lowat = sop->so_lowat;
2461 			}
2462 		}
2463 		if (sop->so_flags & SO_MREADON)
2464 			stp->sd_flag |= SNDMREAD;
2465 		if (sop->so_flags & SO_MREADOFF)
2466 			stp->sd_flag &= ~SNDMREAD;
2467 		if (sop->so_flags & SO_NDELON)
2468 			stp->sd_flag |= OLDNDELAY;
2469 		if (sop->so_flags & SO_NDELOFF)
2470 			stp->sd_flag &= ~OLDNDELAY;
2471 		if (sop->so_flags & SO_ISTTY)
2472 			stp->sd_flag |= STRISTTY;
2473 		if (sop->so_flags & SO_ISNTTY)
2474 			stp->sd_flag &= ~STRISTTY;
2475 		if (sop->so_flags & SO_TOSTOP)
2476 			stp->sd_flag |= STRTOSTOP;
2477 		if (sop->so_flags & SO_TONSTOP)
2478 			stp->sd_flag &= ~STRTOSTOP;
2479 		if (sop->so_flags & SO_DELIM)
2480 			stp->sd_flag |= STRDELIM;
2481 		if (sop->so_flags & SO_NODELIM)
2482 			stp->sd_flag &= ~STRDELIM;
2483 
2484 		mutex_exit(&stp->sd_lock);
2485 		freemsg(bp);
2486 
2487 		/* Check backenable in case the water marks changed */
2488 		qbackenable(q, bpri);
2489 		return (0);
2490 
2491 	/*
2492 	 * The following set of cases deal with situations where two stream
2493 	 * heads are connected to each other (twisted streams).  These messages
2494 	 * have no meaning at the stream head.
2495 	 */
2496 	case M_BREAK:
2497 	case M_CTL:
2498 	case M_DELAY:
2499 	case M_START:
2500 	case M_STOP:
2501 	case M_IOCDATA:
2502 	case M_STARTI:
2503 	case M_STOPI:
2504 		freemsg(bp);
2505 		return (0);
2506 
2507 	case M_IOCTL:
2508 		/*
2509 		 * Always NAK this condition
2510 		 * (makes no sense)
2511 		 * If there is one or more threads in the read side
2512 		 * rwnext we have to defer the nacking until that thread
2513 		 * returns (in strget).
2514 		 */
2515 		mutex_enter(&stp->sd_lock);
2516 		if (stp->sd_struiodnak != 0) {
2517 			/*
2518 			 * Defer NAK to the streamhead. Queue at the end
2519 			 * the list.
2520 			 */
2521 			mblk_t *mp = stp->sd_struionak;
2522 
2523 			while (mp && mp->b_next)
2524 				mp = mp->b_next;
2525 			if (mp)
2526 				mp->b_next = bp;
2527 			else
2528 				stp->sd_struionak = bp;
2529 			bp->b_next = NULL;
2530 			mutex_exit(&stp->sd_lock);
2531 			return (0);
2532 		}
2533 		mutex_exit(&stp->sd_lock);
2534 
2535 		bp->b_datap->db_type = M_IOCNAK;
2536 		/*
2537 		 * Protect against the driver passing up
2538 		 * messages after it has done a qprocsoff.
2539 		 */
2540 		if (_OTHERQ(q)->q_next == NULL)
2541 			freemsg(bp);
2542 		else
2543 			qreply(q, bp);
2544 		return (0);
2545 
2546 	default:
2547 #ifdef DEBUG
2548 		cmn_err(CE_WARN,
2549 		    "bad message type %x received at stream head\n",
2550 		    bp->b_datap->db_type);
2551 #endif
2552 		freemsg(bp);
2553 		return (0);
2554 	}
2555 
2556 	/* NOTREACHED */
2557 }
2558 
2559 /*
2560  * Check if the stream pointed to by `stp' can be written to, and return an
2561  * error code if not.  If `eiohup' is set, then return EIO if STRHUP is set.
2562  * If `sigpipeok' is set and the SW_SIGPIPE option is enabled on the stream,
2563  * then always return EPIPE and send a SIGPIPE to the invoking thread.
2564  */
2565 static int
strwriteable(struct stdata * stp,boolean_t eiohup,boolean_t sigpipeok)2566 strwriteable(struct stdata *stp, boolean_t eiohup, boolean_t sigpipeok)
2567 {
2568 	int error;
2569 
2570 	ASSERT(MUTEX_HELD(&stp->sd_lock));
2571 
2572 	/*
2573 	 * For modem support, POSIX states that on writes, EIO should
2574 	 * be returned if the stream has been hung up.
2575 	 */
2576 	if (eiohup && (stp->sd_flag & (STPLEX|STRHUP)) == STRHUP)
2577 		error = EIO;
2578 	else
2579 		error = strgeterr(stp, STRHUP|STPLEX|STWRERR, 0);
2580 
2581 	if (error != 0) {
2582 		if (!(stp->sd_flag & STPLEX) &&
2583 		    (stp->sd_wput_opt & SW_SIGPIPE) && sigpipeok) {
2584 			tsignal(curthread, SIGPIPE);
2585 			error = EPIPE;
2586 		}
2587 	}
2588 
2589 	return (error);
2590 }
2591 
2592 /*
2593  * Copyin and send data down a stream.
2594  * The caller will allocate and copyin any control part that precedes the
2595  * message and pass that in as mctl.
2596  *
2597  * Caller should *not* hold sd_lock.
2598  * When EWOULDBLOCK is returned the caller has to redo the canputnext
2599  * under sd_lock in order to avoid missing a backenabling wakeup.
2600  *
2601  * Use iosize = -1 to not send any M_DATA. iosize = 0 sends zero-length M_DATA.
2602  *
2603  * Set MSG_IGNFLOW in flags to ignore flow control for hipri messages.
2604  * For sync streams we can only ignore flow control by reverting to using
2605  * putnext.
2606  *
2607  * If sd_maxblk is less than *iosize this routine might return without
2608  * transferring all of *iosize. In all cases, on return *iosize will contain
2609  * the amount of data that was transferred.
2610  */
2611 static int
strput(struct stdata * stp,mblk_t * mctl,struct uio * uiop,ssize_t * iosize,int b_flag,int pri,int flags)2612 strput(struct stdata *stp, mblk_t *mctl, struct uio *uiop, ssize_t *iosize,
2613     int b_flag, int pri, int flags)
2614 {
2615 	struiod_t uiod;
2616 	struct iovec buf[IOV_MAX_STACK];
2617 	int iovlen = 0;
2618 	mblk_t *mp;
2619 	queue_t *wqp = stp->sd_wrq;
2620 	int error = 0;
2621 	ssize_t count = *iosize;
2622 
2623 	ASSERT(MUTEX_NOT_HELD(&stp->sd_lock));
2624 
2625 	if (uiop != NULL && count >= 0)
2626 		flags |= stp->sd_struiowrq ? STRUIO_POSTPONE : 0;
2627 
2628 	if (!(flags & STRUIO_POSTPONE)) {
2629 		/*
2630 		 * Use regular canputnext, strmakedata, putnext sequence.
2631 		 */
2632 		if (pri == 0) {
2633 			if (!canputnext(wqp) && !(flags & MSG_IGNFLOW)) {
2634 				freemsg(mctl);
2635 				return (EWOULDBLOCK);
2636 			}
2637 		} else {
2638 			if (!(flags & MSG_IGNFLOW) && !bcanputnext(wqp, pri)) {
2639 				freemsg(mctl);
2640 				return (EWOULDBLOCK);
2641 			}
2642 		}
2643 
2644 		if ((error = strmakedata(iosize, uiop, stp, flags,
2645 		    &mp)) != 0) {
2646 			freemsg(mctl);
2647 			/*
2648 			 * need to change return code to ENOMEM
2649 			 * so that this is not confused with
2650 			 * flow control, EAGAIN.
2651 			 */
2652 
2653 			if (error == EAGAIN)
2654 				return (ENOMEM);
2655 			else
2656 				return (error);
2657 		}
2658 		if (mctl != NULL) {
2659 			if (mctl->b_cont == NULL)
2660 				mctl->b_cont = mp;
2661 			else if (mp != NULL)
2662 				linkb(mctl, mp);
2663 			mp = mctl;
2664 		} else if (mp == NULL)
2665 			return (0);
2666 
2667 		mp->b_flag |= b_flag;
2668 		mp->b_band = (uchar_t)pri;
2669 
2670 		if (flags & MSG_IGNFLOW) {
2671 			/*
2672 			 * XXX Hack: Don't get stuck running service
2673 			 * procedures. This is needed for sockfs when
2674 			 * sending the unbind message out of the rput
2675 			 * procedure - we don't want a put procedure
2676 			 * to run service procedures.
2677 			 */
2678 			putnext(wqp, mp);
2679 		} else {
2680 			stream_willservice(stp);
2681 			putnext(wqp, mp);
2682 			stream_runservice(stp);
2683 		}
2684 		return (0);
2685 	}
2686 	/*
2687 	 * Stream supports rwnext() for the write side.
2688 	 */
2689 	if ((error = strmakedata(iosize, uiop, stp, flags, &mp)) != 0) {
2690 		freemsg(mctl);
2691 		/*
2692 		 * map EAGAIN to ENOMEM since EAGAIN means "flow controlled".
2693 		 */
2694 		return (error == EAGAIN ? ENOMEM : error);
2695 	}
2696 	if (mctl != NULL) {
2697 		if (mctl->b_cont == NULL)
2698 			mctl->b_cont = mp;
2699 		else if (mp != NULL)
2700 			linkb(mctl, mp);
2701 		mp = mctl;
2702 	} else if (mp == NULL) {
2703 		return (0);
2704 	}
2705 
2706 	mp->b_flag |= b_flag;
2707 	mp->b_band = (uchar_t)pri;
2708 
2709 	if (uiop->uio_iovcnt > IOV_MAX_STACK) {
2710 		iovlen = uiop->uio_iovcnt * sizeof (iovec_t);
2711 		uiod.d_iov = (struct iovec *)kmem_alloc(iovlen, KM_SLEEP);
2712 	} else {
2713 		uiod.d_iov = buf;
2714 	}
2715 
2716 	(void) uiodup(uiop, &uiod.d_uio, uiod.d_iov, uiop->uio_iovcnt);
2717 	uiod.d_uio.uio_offset = 0;
2718 	uiod.d_mp = mp;
2719 	error = rwnext(wqp, &uiod);
2720 	if (! uiod.d_mp) {
2721 		uioskip(uiop, *iosize);
2722 		if (iovlen != 0)
2723 			kmem_free(uiod.d_iov, iovlen);
2724 		return (error);
2725 	}
2726 	ASSERT(mp == uiod.d_mp);
2727 	if (error == EINVAL) {
2728 		/*
2729 		 * The stream plumbing must have changed while
2730 		 * we were away, so just turn off rwnext()s.
2731 		 */
2732 		error = 0;
2733 	} else if (error == EBUSY || error == EWOULDBLOCK) {
2734 		/*
2735 		 * Couldn't enter a perimeter or took a page fault,
2736 		 * so fall-back to putnext().
2737 		 */
2738 		error = 0;
2739 	} else {
2740 		freemsg(mp);
2741 		if (iovlen != 0)
2742 			kmem_free(uiod.d_iov, iovlen);
2743 		return (error);
2744 	}
2745 	/* Have to check canput before consuming data from the uio */
2746 	if (pri == 0) {
2747 		if (!canputnext(wqp) && !(flags & MSG_IGNFLOW)) {
2748 			freemsg(mp);
2749 			if (iovlen != 0)
2750 				kmem_free(uiod.d_iov, iovlen);
2751 			return (EWOULDBLOCK);
2752 		}
2753 	} else {
2754 		if (!bcanputnext(wqp, pri) && !(flags & MSG_IGNFLOW)) {
2755 			freemsg(mp);
2756 			if (iovlen != 0)
2757 				kmem_free(uiod.d_iov, iovlen);
2758 			return (EWOULDBLOCK);
2759 		}
2760 	}
2761 	ASSERT(mp == uiod.d_mp);
2762 	/* Copyin data from the uio */
2763 	if ((error = struioget(wqp, mp, &uiod, 0)) != 0) {
2764 		freemsg(mp);
2765 		if (iovlen != 0)
2766 			kmem_free(uiod.d_iov, iovlen);
2767 		return (error);
2768 	}
2769 	uioskip(uiop, *iosize);
2770 	if (flags & MSG_IGNFLOW) {
2771 		/*
2772 		 * XXX Hack: Don't get stuck running service procedures.
2773 		 * This is needed for sockfs when sending the unbind message
2774 		 * out of the rput procedure - we don't want a put procedure
2775 		 * to run service procedures.
2776 		 */
2777 		putnext(wqp, mp);
2778 	} else {
2779 		stream_willservice(stp);
2780 		putnext(wqp, mp);
2781 		stream_runservice(stp);
2782 	}
2783 	if (iovlen != 0)
2784 		kmem_free(uiod.d_iov, iovlen);
2785 	return (0);
2786 }
2787 
2788 /*
2789  * Write attempts to break the write request into messages conforming
2790  * with the minimum and maximum packet sizes set downstream.
2791  *
2792  * Write will not block if downstream queue is full and
2793  * O_NDELAY is set, otherwise it will block waiting for the queue to get room.
2794  *
2795  * A write of zero bytes gets packaged into a zero length message and sent
2796  * downstream like any other message.
2797  *
2798  * If buffers of the requested sizes are not available, the write will
2799  * sleep until the buffers become available.
2800  *
2801  * Write (if specified) will supply a write offset in a message if it
2802  * makes sense. This can be specified by downstream modules as part of
2803  * a M_SETOPTS message.  Write will not supply the write offset if it
2804  * cannot supply any data in a buffer.  In other words, write will never
2805  * send down an empty packet due to a write offset.
2806  */
2807 /* ARGSUSED2 */
2808 int
strwrite(struct vnode * vp,struct uio * uiop,cred_t * crp)2809 strwrite(struct vnode *vp, struct uio *uiop, cred_t *crp)
2810 {
2811 	return (strwrite_common(vp, uiop, crp, 0));
2812 }
2813 
2814 /* ARGSUSED2 */
2815 int
strwrite_common(struct vnode * vp,struct uio * uiop,cred_t * crp,int wflag)2816 strwrite_common(struct vnode *vp, struct uio *uiop, cred_t *crp, int wflag)
2817 {
2818 	struct stdata *stp;
2819 	struct queue *wqp;
2820 	ssize_t rmin, rmax;
2821 	ssize_t iosize;
2822 	int waitflag;
2823 	int tempmode;
2824 	int error = 0;
2825 	int b_flag;
2826 
2827 	ASSERT(vp->v_stream);
2828 	stp = vp->v_stream;
2829 
2830 	mutex_enter(&stp->sd_lock);
2831 
2832 	if ((error = i_straccess(stp, JCWRITE)) != 0) {
2833 		mutex_exit(&stp->sd_lock);
2834 		return (error);
2835 	}
2836 
2837 	if (stp->sd_flag & (STWRERR|STRHUP|STPLEX)) {
2838 		error = strwriteable(stp, B_TRUE, B_TRUE);
2839 		if (error != 0) {
2840 			mutex_exit(&stp->sd_lock);
2841 			return (error);
2842 		}
2843 	}
2844 
2845 	mutex_exit(&stp->sd_lock);
2846 
2847 	wqp = stp->sd_wrq;
2848 
2849 	/* get these values from them cached in the stream head */
2850 	rmin = stp->sd_qn_minpsz;
2851 	rmax = stp->sd_qn_maxpsz;
2852 
2853 	/*
2854 	 * Check the min/max packet size constraints.  If min packet size
2855 	 * is non-zero, the write cannot be split into multiple messages
2856 	 * and still guarantee the size constraints.
2857 	 */
2858 	TRACE_1(TR_FAC_STREAMS_FR, TR_STRWRITE_IN, "strwrite in:q %p", wqp);
2859 
2860 	ASSERT((rmax >= 0) || (rmax == INFPSZ));
2861 	if (rmax == 0) {
2862 		return (0);
2863 	}
2864 	if (rmin > 0) {
2865 		if (uiop->uio_resid < rmin) {
2866 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRWRITE_OUT,
2867 			    "strwrite out:q %p out %d error %d",
2868 			    wqp, 0, ERANGE);
2869 			return (ERANGE);
2870 		}
2871 		if ((rmax != INFPSZ) && (uiop->uio_resid > rmax)) {
2872 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRWRITE_OUT,
2873 			    "strwrite out:q %p out %d error %d",
2874 			    wqp, 1, ERANGE);
2875 			return (ERANGE);
2876 		}
2877 	}
2878 
2879 	/*
2880 	 * Do until count satisfied or error.
2881 	 */
2882 	waitflag = WRITEWAIT | wflag;
2883 	if (stp->sd_flag & OLDNDELAY)
2884 		tempmode = uiop->uio_fmode & ~FNDELAY;
2885 	else
2886 		tempmode = uiop->uio_fmode;
2887 
2888 	if (rmax == INFPSZ)
2889 		rmax = uiop->uio_resid;
2890 
2891 	/*
2892 	 * Note that tempmode does not get used in strput/strmakedata
2893 	 * but only in strwaitq. The other routines use uio_fmode
2894 	 * unmodified.
2895 	 */
2896 
2897 	/* LINTED: constant in conditional context */
2898 	while (1) {	/* breaks when uio_resid reaches zero */
2899 		/*
2900 		 * Determine the size of the next message to be
2901 		 * packaged.  May have to break write into several
2902 		 * messages based on max packet size.
2903 		 */
2904 		iosize = MIN(uiop->uio_resid, rmax);
2905 
2906 		/*
2907 		 * Put block downstream when flow control allows it.
2908 		 */
2909 		if ((stp->sd_flag & STRDELIM) && (uiop->uio_resid == iosize))
2910 			b_flag = MSGDELIM;
2911 		else
2912 			b_flag = 0;
2913 
2914 		for (;;) {
2915 			int done = 0;
2916 
2917 			error = strput(stp, NULL, uiop, &iosize, b_flag, 0, 0);
2918 			if (error == 0)
2919 				break;
2920 			if (error != EWOULDBLOCK)
2921 				goto out;
2922 
2923 			mutex_enter(&stp->sd_lock);
2924 			/*
2925 			 * Check for a missed wakeup.
2926 			 * Needed since strput did not hold sd_lock across
2927 			 * the canputnext.
2928 			 */
2929 			if (canputnext(wqp)) {
2930 				/* Try again */
2931 				mutex_exit(&stp->sd_lock);
2932 				continue;
2933 			}
2934 			TRACE_1(TR_FAC_STREAMS_FR, TR_STRWRITE_WAIT,
2935 			    "strwrite wait:q %p wait", wqp);
2936 			if ((error = strwaitq(stp, waitflag, (ssize_t)0,
2937 			    tempmode, -1, &done)) != 0 || done) {
2938 				mutex_exit(&stp->sd_lock);
2939 				if ((vp->v_type == VFIFO) &&
2940 				    (uiop->uio_fmode & FNDELAY) &&
2941 				    (error == EAGAIN))
2942 					error = 0;
2943 				goto out;
2944 			}
2945 			TRACE_1(TR_FAC_STREAMS_FR, TR_STRWRITE_WAKE,
2946 			    "strwrite wake:q %p awakes", wqp);
2947 			if ((error = i_straccess(stp, JCWRITE)) != 0) {
2948 				mutex_exit(&stp->sd_lock);
2949 				goto out;
2950 			}
2951 			mutex_exit(&stp->sd_lock);
2952 		}
2953 		waitflag |= NOINTR;
2954 		TRACE_2(TR_FAC_STREAMS_FR, TR_STRWRITE_RESID,
2955 		    "strwrite resid:q %p uiop %p", wqp, uiop);
2956 		if (uiop->uio_resid) {
2957 			/* Recheck for errors - needed for sockets */
2958 			if ((stp->sd_wput_opt & SW_RECHECK_ERR) &&
2959 			    (stp->sd_flag & (STWRERR|STRHUP|STPLEX))) {
2960 				mutex_enter(&stp->sd_lock);
2961 				error = strwriteable(stp, B_FALSE, B_TRUE);
2962 				mutex_exit(&stp->sd_lock);
2963 				if (error != 0)
2964 					return (error);
2965 			}
2966 			continue;
2967 		}
2968 		break;
2969 	}
2970 out:
2971 	/*
2972 	 * For historical reasons, applications expect EAGAIN when a data
2973 	 * mblk_t cannot be allocated, so change ENOMEM back to EAGAIN.
2974 	 */
2975 	if (error == ENOMEM)
2976 		error = EAGAIN;
2977 	TRACE_3(TR_FAC_STREAMS_FR, TR_STRWRITE_OUT,
2978 	    "strwrite out:q %p out %d error %d", wqp, 2, error);
2979 	return (error);
2980 }
2981 
2982 /*
2983  * Stream head write service routine.
2984  * Its job is to wake up any sleeping writers when a queue
2985  * downstream needs data (part of the flow control in putq and getq).
2986  * It also must wake anyone sleeping on a poll().
2987  * For stream head right below mux module, it must also invoke put procedure
2988  * of next downstream module.
2989  */
2990 int
strwsrv(queue_t * q)2991 strwsrv(queue_t *q)
2992 {
2993 	struct stdata *stp;
2994 	queue_t *tq;
2995 	qband_t *qbp;
2996 	int i;
2997 	qband_t *myqbp;
2998 	int isevent;
2999 	unsigned char	qbf[NBAND];	/* band flushing backenable flags */
3000 
3001 	TRACE_1(TR_FAC_STREAMS_FR,
3002 	    TR_STRWSRV, "strwsrv:q %p", q);
3003 	stp = (struct stdata *)q->q_ptr;
3004 	ASSERT(qclaimed(q));
3005 	mutex_enter(&stp->sd_lock);
3006 	ASSERT(!(stp->sd_flag & STPLEX));
3007 
3008 	if (stp->sd_flag & WSLEEP) {
3009 		stp->sd_flag &= ~WSLEEP;
3010 		cv_broadcast(&q->q_wait);
3011 	}
3012 	mutex_exit(&stp->sd_lock);
3013 
3014 	/* The other end of a stream pipe went away. */
3015 	if ((tq = q->q_next) == NULL) {
3016 		return (0);
3017 	}
3018 
3019 	/* Find the next module forward that has a service procedure */
3020 	claimstr(q);
3021 	tq = q->q_nfsrv;
3022 	ASSERT(tq != NULL);
3023 
3024 	if ((q->q_flag & QBACK)) {
3025 		if ((tq->q_flag & QFULL)) {
3026 			mutex_enter(QLOCK(tq));
3027 			if (!(tq->q_flag & QFULL)) {
3028 				mutex_exit(QLOCK(tq));
3029 				goto wakeup;
3030 			}
3031 			/*
3032 			 * The queue must have become full again. Set QWANTW
3033 			 * again so strwsrv will be back enabled when
3034 			 * the queue becomes non-full next time.
3035 			 */
3036 			tq->q_flag |= QWANTW;
3037 			mutex_exit(QLOCK(tq));
3038 		} else {
3039 		wakeup:
3040 			pollwakeup(&stp->sd_pollist, POLLWRNORM);
3041 			mutex_enter(&stp->sd_lock);
3042 			if (stp->sd_sigflags & S_WRNORM)
3043 				strsendsig(stp->sd_siglist, S_WRNORM, 0, 0);
3044 			mutex_exit(&stp->sd_lock);
3045 		}
3046 	}
3047 
3048 	isevent = 0;
3049 	i = 1;
3050 	bzero((caddr_t)qbf, NBAND);
3051 	mutex_enter(QLOCK(tq));
3052 	if ((myqbp = q->q_bandp) != NULL)
3053 		for (qbp = tq->q_bandp; qbp && myqbp; qbp = qbp->qb_next) {
3054 			ASSERT(myqbp);
3055 			if ((myqbp->qb_flag & QB_BACK)) {
3056 				if (qbp->qb_flag & QB_FULL) {
3057 					/*
3058 					 * The band must have become full again.
3059 					 * Set QB_WANTW again so strwsrv will
3060 					 * be back enabled when the band becomes
3061 					 * non-full next time.
3062 					 */
3063 					qbp->qb_flag |= QB_WANTW;
3064 				} else {
3065 					isevent = 1;
3066 					qbf[i] = 1;
3067 				}
3068 			}
3069 			myqbp = myqbp->qb_next;
3070 			i++;
3071 		}
3072 	mutex_exit(QLOCK(tq));
3073 
3074 	if (isevent) {
3075 		for (i = tq->q_nband; i; i--) {
3076 			if (qbf[i]) {
3077 				pollwakeup(&stp->sd_pollist, POLLWRBAND);
3078 				mutex_enter(&stp->sd_lock);
3079 				if (stp->sd_sigflags & S_WRBAND)
3080 					strsendsig(stp->sd_siglist, S_WRBAND,
3081 					    (uchar_t)i, 0);
3082 				mutex_exit(&stp->sd_lock);
3083 			}
3084 		}
3085 	}
3086 
3087 	releasestr(q);
3088 	return (0);
3089 }
3090 
3091 /*
3092  * Special case of strcopyin/strcopyout for copying
3093  * struct strioctl that can deal with both data
3094  * models.
3095  */
3096 
3097 #ifdef	_LP64
3098 
3099 static int
strcopyin_strioctl(void * from,void * to,int flag,int copyflag)3100 strcopyin_strioctl(void *from, void *to, int flag, int copyflag)
3101 {
3102 	struct	strioctl32 strioc32;
3103 	struct	strioctl *striocp;
3104 
3105 	if (copyflag & U_TO_K) {
3106 		ASSERT((copyflag & K_TO_K) == 0);
3107 
3108 		if ((flag & FMODELS) == DATAMODEL_ILP32) {
3109 			if (copyin(from, &strioc32, sizeof (strioc32)))
3110 				return (EFAULT);
3111 
3112 			striocp = (struct strioctl *)to;
3113 			striocp->ic_cmd	= strioc32.ic_cmd;
3114 			striocp->ic_timout = strioc32.ic_timout;
3115 			striocp->ic_len	= strioc32.ic_len;
3116 			striocp->ic_dp	= (char *)(uintptr_t)strioc32.ic_dp;
3117 
3118 		} else { /* NATIVE data model */
3119 			if (copyin(from, to, sizeof (struct strioctl))) {
3120 				return (EFAULT);
3121 			} else {
3122 				return (0);
3123 			}
3124 		}
3125 	} else {
3126 		ASSERT(copyflag & K_TO_K);
3127 		bcopy(from, to, sizeof (struct strioctl));
3128 	}
3129 	return (0);
3130 }
3131 
3132 static int
strcopyout_strioctl(void * from,void * to,int flag,int copyflag)3133 strcopyout_strioctl(void *from, void *to, int flag, int copyflag)
3134 {
3135 	struct	strioctl32 strioc32;
3136 	struct	strioctl *striocp;
3137 
3138 	if (copyflag & U_TO_K) {
3139 		ASSERT((copyflag & K_TO_K) == 0);
3140 
3141 		if ((flag & FMODELS) == DATAMODEL_ILP32) {
3142 			striocp = (struct strioctl *)from;
3143 			strioc32.ic_cmd	= striocp->ic_cmd;
3144 			strioc32.ic_timout = striocp->ic_timout;
3145 			strioc32.ic_len	= striocp->ic_len;
3146 			strioc32.ic_dp	= (caddr32_t)(uintptr_t)striocp->ic_dp;
3147 			ASSERT((char *)(uintptr_t)strioc32.ic_dp ==
3148 			    striocp->ic_dp);
3149 
3150 			if (copyout(&strioc32, to, sizeof (strioc32)))
3151 				return (EFAULT);
3152 
3153 		} else { /* NATIVE data model */
3154 			if (copyout(from, to, sizeof (struct strioctl))) {
3155 				return (EFAULT);
3156 			} else {
3157 				return (0);
3158 			}
3159 		}
3160 	} else {
3161 		ASSERT(copyflag & K_TO_K);
3162 		bcopy(from, to, sizeof (struct strioctl));
3163 	}
3164 	return (0);
3165 }
3166 
3167 #else	/* ! _LP64 */
3168 
3169 /* ARGSUSED2 */
3170 static int
strcopyin_strioctl(void * from,void * to,int flag,int copyflag)3171 strcopyin_strioctl(void *from, void *to, int flag, int copyflag)
3172 {
3173 	return (strcopyin(from, to, sizeof (struct strioctl), copyflag));
3174 }
3175 
3176 /* ARGSUSED2 */
3177 static int
strcopyout_strioctl(void * from,void * to,int flag,int copyflag)3178 strcopyout_strioctl(void *from, void *to, int flag, int copyflag)
3179 {
3180 	return (strcopyout(from, to, sizeof (struct strioctl), copyflag));
3181 }
3182 
3183 #endif	/* _LP64 */
3184 
3185 /*
3186  * Determine type of job control semantics expected by user.  The
3187  * possibilities are:
3188  *	JCREAD	- Behaves like read() on fd; send SIGTTIN
3189  *	JCWRITE	- Behaves like write() on fd; send SIGTTOU if TOSTOP set
3190  *	JCSETP	- Sets a value in the stream; send SIGTTOU, ignore TOSTOP
3191  *	JCGETP	- Gets a value in the stream; no signals.
3192  * See straccess in strsubr.c for usage of these values.
3193  *
3194  * This routine also returns -1 for I_STR as a special case; the
3195  * caller must call again with the real ioctl number for
3196  * classification.
3197  */
3198 static int
job_control_type(int cmd)3199 job_control_type(int cmd)
3200 {
3201 	switch (cmd) {
3202 	case I_STR:
3203 		return (-1);
3204 
3205 	case I_RECVFD:
3206 	case I_E_RECVFD:
3207 		return (JCREAD);
3208 
3209 	case I_FDINSERT:
3210 	case I_SENDFD:
3211 		return (JCWRITE);
3212 
3213 	case TCSETA:
3214 	case TCSETAW:
3215 	case TCSETAF:
3216 	case TCSBRK:
3217 	case TCXONC:
3218 	case TCFLSH:
3219 	case TCDSET:	/* Obsolete */
3220 	case TIOCSWINSZ:
3221 	case TCSETS:
3222 	case TCSETSW:
3223 	case TCSETSF:
3224 	case TIOCSETD:
3225 	case TIOCHPCL:
3226 	case TIOCSETP:
3227 	case TIOCSETN:
3228 	case TIOCEXCL:
3229 	case TIOCNXCL:
3230 	case TIOCFLUSH:
3231 	case TIOCSETC:
3232 	case TIOCLBIS:
3233 	case TIOCLBIC:
3234 	case TIOCLSET:
3235 	case TIOCSBRK:
3236 	case TIOCCBRK:
3237 	case TIOCSDTR:
3238 	case TIOCCDTR:
3239 	case TIOCSLTC:
3240 	case TIOCSTOP:
3241 	case TIOCSTART:
3242 	case TIOCSTI:
3243 	case TIOCSPGRP:
3244 	case TIOCMSET:
3245 	case TIOCMBIS:
3246 	case TIOCMBIC:
3247 	case TIOCREMOTE:
3248 	case TIOCSIGNAL:
3249 	case LDSETT:
3250 	case LDSMAP:	/* Obsolete */
3251 	case DIOCSETP:
3252 	case I_FLUSH:
3253 	case I_SRDOPT:
3254 	case I_SETSIG:
3255 	case I_SWROPT:
3256 	case I_FLUSHBAND:
3257 	case I_SETCLTIME:
3258 	case I_SERROPT:
3259 	case I_ESETSIG:
3260 	case FIONBIO:
3261 	case FIOASYNC:
3262 	case FIOSETOWN:
3263 	case JBOOT:	/* Obsolete */
3264 	case JTERM:	/* Obsolete */
3265 	case JTIMOM:	/* Obsolete */
3266 	case JZOMBOOT:	/* Obsolete */
3267 	case JAGENT:	/* Obsolete */
3268 	case JTRUN:	/* Obsolete */
3269 	case JXTPROTO:	/* Obsolete */
3270 		return (JCSETP);
3271 	}
3272 
3273 	return (JCGETP);
3274 }
3275 
3276 /*
3277  * ioctl for streams
3278  */
3279 int
strioctl(struct vnode * vp,int cmd,intptr_t arg,int flag,int copyflag,cred_t * crp,int * rvalp)3280 strioctl(struct vnode *vp, int cmd, intptr_t arg, int flag, int copyflag,
3281     cred_t *crp, int *rvalp)
3282 {
3283 	struct stdata *stp;
3284 	struct strcmd *scp;
3285 	struct strioctl strioc;
3286 	struct uio uio;
3287 	struct iovec iov;
3288 	int access;
3289 	mblk_t *mp;
3290 	int error = 0;
3291 	int done = 0;
3292 	ssize_t	rmin, rmax;
3293 	queue_t *wrq;
3294 	queue_t *rdq;
3295 	boolean_t kioctl = B_FALSE;
3296 	uint32_t auditing = AU_AUDITING();
3297 
3298 	if (flag & FKIOCTL) {
3299 		copyflag = K_TO_K;
3300 		kioctl = B_TRUE;
3301 	}
3302 	ASSERT(vp->v_stream);
3303 	ASSERT(copyflag == U_TO_K || copyflag == K_TO_K);
3304 	stp = vp->v_stream;
3305 
3306 	TRACE_3(TR_FAC_STREAMS_FR, TR_IOCTL_ENTER,
3307 	    "strioctl:stp %p cmd %X arg %lX", stp, cmd, arg);
3308 
3309 	/*
3310 	 * If the copy is kernel to kernel, make sure that the FNATIVE
3311 	 * flag is set.  After this it would be a serious error to have
3312 	 * no model flag.
3313 	 */
3314 	if (copyflag == K_TO_K)
3315 		flag = (flag & ~FMODELS) | FNATIVE;
3316 
3317 	ASSERT((flag & FMODELS) != 0);
3318 
3319 	wrq = stp->sd_wrq;
3320 	rdq = _RD(wrq);
3321 
3322 	access = job_control_type(cmd);
3323 
3324 	/* We should never see these here, should be handled by iwscn */
3325 	if (cmd == SRIOCSREDIR || cmd == SRIOCISREDIR)
3326 		return (EINVAL);
3327 
3328 	mutex_enter(&stp->sd_lock);
3329 	if ((access != -1) && ((error = i_straccess(stp, access)) != 0)) {
3330 		mutex_exit(&stp->sd_lock);
3331 		return (error);
3332 	}
3333 	mutex_exit(&stp->sd_lock);
3334 
3335 	/*
3336 	 * Check for sgttyb-related ioctls first, and complain as
3337 	 * necessary.
3338 	 */
3339 	switch (cmd) {
3340 	case TIOCGETP:
3341 	case TIOCSETP:
3342 	case TIOCSETN:
3343 		if (sgttyb_handling >= 2 && !sgttyb_complaint) {
3344 			sgttyb_complaint = B_TRUE;
3345 			cmn_err(CE_NOTE,
3346 			    "application used obsolete TIOC[GS]ET");
3347 		}
3348 		if (sgttyb_handling >= 3) {
3349 			tsignal(curthread, SIGSYS);
3350 			return (EIO);
3351 		}
3352 		break;
3353 	}
3354 
3355 	mutex_enter(&stp->sd_lock);
3356 
3357 	switch (cmd) {
3358 	case I_RECVFD:
3359 	case I_E_RECVFD:
3360 	case I_PEEK:
3361 	case I_NREAD:
3362 	case FIONREAD:
3363 	case FIORDCHK:
3364 	case I_ATMARK:
3365 	case FIONBIO:
3366 	case FIOASYNC:
3367 		if (stp->sd_flag & (STRDERR|STPLEX)) {
3368 			error = strgeterr(stp, STRDERR|STPLEX, 0);
3369 			if (error != 0) {
3370 				mutex_exit(&stp->sd_lock);
3371 				return (error);
3372 			}
3373 		}
3374 		break;
3375 
3376 	default:
3377 		if (stp->sd_flag & (STRDERR|STWRERR|STPLEX)) {
3378 			error = strgeterr(stp, STRDERR|STWRERR|STPLEX, 0);
3379 			if (error != 0) {
3380 				mutex_exit(&stp->sd_lock);
3381 				return (error);
3382 			}
3383 		}
3384 	}
3385 
3386 	mutex_exit(&stp->sd_lock);
3387 
3388 	switch (cmd) {
3389 	default:
3390 		/*
3391 		 * The stream head has hardcoded knowledge of a
3392 		 * miscellaneous collection of terminal-, keyboard- and
3393 		 * mouse-related ioctls, enumerated below.  This hardcoded
3394 		 * knowledge allows the stream head to automatically
3395 		 * convert transparent ioctl requests made by userland
3396 		 * programs into I_STR ioctls which many old STREAMS
3397 		 * modules and drivers require.
3398 		 *
3399 		 * No new ioctls should ever be added to this list.
3400 		 * Instead, the STREAMS module or driver should be written
3401 		 * to either handle transparent ioctls or require any
3402 		 * userland programs to use I_STR ioctls (by returning
3403 		 * EINVAL to any transparent ioctl requests).
3404 		 *
3405 		 * More importantly, removing ioctls from this list should
3406 		 * be done with the utmost care, since our STREAMS modules
3407 		 * and drivers *count* on the stream head performing this
3408 		 * conversion, and thus may panic while processing
3409 		 * transparent ioctl request for one of these ioctls (keep
3410 		 * in mind that third party modules and drivers may have
3411 		 * similar problems).
3412 		 */
3413 		if (((cmd & IOCTYPE) == LDIOC) ||
3414 		    ((cmd & IOCTYPE) == tIOC) ||
3415 		    ((cmd & IOCTYPE) == TIOC) ||
3416 		    ((cmd & IOCTYPE) == KIOC) ||
3417 		    ((cmd & IOCTYPE) == MSIOC) ||
3418 		    ((cmd & IOCTYPE) == VUIOC)) {
3419 			/*
3420 			 * The ioctl is a tty ioctl - set up strioc buffer
3421 			 * and call strdoioctl() to do the work.
3422 			 */
3423 			if (stp->sd_flag & STRHUP)
3424 				return (ENXIO);
3425 			strioc.ic_cmd = cmd;
3426 			strioc.ic_timout = INFTIM;
3427 
3428 			switch (cmd) {
3429 
3430 			case TCXONC:
3431 			case TCSBRK:
3432 			case TCFLSH:
3433 			case TCDSET:
3434 				{
3435 				int native_arg = (int)arg;
3436 				strioc.ic_len = sizeof (int);
3437 				strioc.ic_dp = (char *)&native_arg;
3438 				return (strdoioctl(stp, &strioc, flag,
3439 				    K_TO_K, crp, rvalp));
3440 				}
3441 
3442 			case TCSETA:
3443 			case TCSETAW:
3444 			case TCSETAF:
3445 				strioc.ic_len = sizeof (struct termio);
3446 				strioc.ic_dp = (char *)arg;
3447 				return (strdoioctl(stp, &strioc, flag,
3448 				    copyflag, crp, rvalp));
3449 
3450 			case TCSETS:
3451 			case TCSETSW:
3452 			case TCSETSF:
3453 				strioc.ic_len = sizeof (struct termios);
3454 				strioc.ic_dp = (char *)arg;
3455 				return (strdoioctl(stp, &strioc, flag,
3456 				    copyflag, crp, rvalp));
3457 
3458 			case LDSETT:
3459 				strioc.ic_len = sizeof (struct termcb);
3460 				strioc.ic_dp = (char *)arg;
3461 				return (strdoioctl(stp, &strioc, flag,
3462 				    copyflag, crp, rvalp));
3463 
3464 			case TIOCSETP:
3465 				strioc.ic_len = sizeof (struct sgttyb);
3466 				strioc.ic_dp = (char *)arg;
3467 				return (strdoioctl(stp, &strioc, flag,
3468 				    copyflag, crp, rvalp));
3469 
3470 			case TIOCSTI:
3471 				if ((flag & FREAD) == 0 &&
3472 				    secpolicy_sti(crp) != 0) {
3473 					return (EPERM);
3474 				}
3475 				mutex_enter(&stp->sd_lock);
3476 				mutex_enter(&curproc->p_splock);
3477 				if (stp->sd_sidp != curproc->p_sessp->s_sidp &&
3478 				    secpolicy_sti(crp) != 0) {
3479 					mutex_exit(&curproc->p_splock);
3480 					mutex_exit(&stp->sd_lock);
3481 					return (EACCES);
3482 				}
3483 				mutex_exit(&curproc->p_splock);
3484 				mutex_exit(&stp->sd_lock);
3485 
3486 				strioc.ic_len = sizeof (char);
3487 				strioc.ic_dp = (char *)arg;
3488 				return (strdoioctl(stp, &strioc, flag,
3489 				    copyflag, crp, rvalp));
3490 
3491 			case TIOCSWINSZ:
3492 				strioc.ic_len = sizeof (struct winsize);
3493 				strioc.ic_dp = (char *)arg;
3494 				return (strdoioctl(stp, &strioc, flag,
3495 				    copyflag, crp, rvalp));
3496 
3497 			case TIOCSSIZE:
3498 				strioc.ic_len = sizeof (struct ttysize);
3499 				strioc.ic_dp = (char *)arg;
3500 				return (strdoioctl(stp, &strioc, flag,
3501 				    copyflag, crp, rvalp));
3502 
3503 			case TIOCSSOFTCAR:
3504 			case KIOCTRANS:
3505 			case KIOCTRANSABLE:
3506 			case KIOCCMD:
3507 			case KIOCSDIRECT:
3508 			case KIOCSCOMPAT:
3509 			case KIOCSKABORTEN:
3510 			case KIOCSRPTCOUNT:
3511 			case KIOCSRPTDELAY:
3512 			case KIOCSRPTRATE:
3513 			case VUIDSFORMAT:
3514 			case TIOCSPPS:
3515 				strioc.ic_len = sizeof (int);
3516 				strioc.ic_dp = (char *)arg;
3517 				return (strdoioctl(stp, &strioc, flag,
3518 				    copyflag, crp, rvalp));
3519 
3520 			case KIOCSETKEY:
3521 			case KIOCGETKEY:
3522 				strioc.ic_len = sizeof (struct kiockey);
3523 				strioc.ic_dp = (char *)arg;
3524 				return (strdoioctl(stp, &strioc, flag,
3525 				    copyflag, crp, rvalp));
3526 
3527 			case KIOCSKEY:
3528 			case KIOCGKEY:
3529 				strioc.ic_len = sizeof (struct kiockeymap);
3530 				strioc.ic_dp = (char *)arg;
3531 				return (strdoioctl(stp, &strioc, flag,
3532 				    copyflag, crp, rvalp));
3533 
3534 			case KIOCSLED:
3535 				/* arg is a pointer to char */
3536 				strioc.ic_len = sizeof (char);
3537 				strioc.ic_dp = (char *)arg;
3538 				return (strdoioctl(stp, &strioc, flag,
3539 				    copyflag, crp, rvalp));
3540 
3541 			case MSIOSETPARMS:
3542 				strioc.ic_len = sizeof (Ms_parms);
3543 				strioc.ic_dp = (char *)arg;
3544 				return (strdoioctl(stp, &strioc, flag,
3545 				    copyflag, crp, rvalp));
3546 
3547 			case VUIDSADDR:
3548 			case VUIDGADDR:
3549 				strioc.ic_len = sizeof (struct vuid_addr_probe);
3550 				strioc.ic_dp = (char *)arg;
3551 				return (strdoioctl(stp, &strioc, flag,
3552 				    copyflag, crp, rvalp));
3553 
3554 			/*
3555 			 * These M_IOCTL's don't require any data to be sent
3556 			 * downstream, and the driver will allocate and link
3557 			 * on its own mblk_t upon M_IOCACK -- thus we set
3558 			 * ic_len to zero and set ic_dp to arg so we know
3559 			 * where to copyout to later.
3560 			 */
3561 			case TIOCGSOFTCAR:
3562 			case TIOCGWINSZ:
3563 			case TIOCGSIZE:
3564 			case KIOCGTRANS:
3565 			case KIOCGTRANSABLE:
3566 			case KIOCTYPE:
3567 			case KIOCGDIRECT:
3568 			case KIOCGCOMPAT:
3569 			case KIOCLAYOUT:
3570 			case KIOCGLED:
3571 			case MSIOGETPARMS:
3572 			case MSIOBUTTONS:
3573 			case VUIDGFORMAT:
3574 			case TIOCGPPS:
3575 			case TIOCGPPSEV:
3576 			case TCGETA:
3577 			case TCGETS:
3578 			case LDGETT:
3579 			case TIOCGETP:
3580 			case KIOCGRPTCOUNT:
3581 			case KIOCGRPTDELAY:
3582 			case KIOCGRPTRATE:
3583 				strioc.ic_len = 0;
3584 				strioc.ic_dp = (char *)arg;
3585 				return (strdoioctl(stp, &strioc, flag,
3586 				    copyflag, crp, rvalp));
3587 			}
3588 		}
3589 
3590 		/*
3591 		 * Unknown cmd - send it down as a transparent ioctl.
3592 		 */
3593 		strioc.ic_cmd = cmd;
3594 		strioc.ic_timout = INFTIM;
3595 		strioc.ic_len = TRANSPARENT;
3596 		strioc.ic_dp = (char *)&arg;
3597 
3598 		return (strdoioctl(stp, &strioc, flag, copyflag, crp, rvalp));
3599 
3600 	case I_STR:
3601 		/*
3602 		 * Stream ioctl.  Read in an strioctl buffer from the user
3603 		 * along with any data specified and send it downstream.
3604 		 * Strdoioctl will wait allow only one ioctl message at
3605 		 * a time, and waits for the acknowledgement.
3606 		 */
3607 
3608 		if (stp->sd_flag & STRHUP)
3609 			return (ENXIO);
3610 
3611 		error = strcopyin_strioctl((void *)arg, &strioc, flag,
3612 		    copyflag);
3613 		if (error != 0)
3614 			return (error);
3615 
3616 		if ((strioc.ic_len < 0) || (strioc.ic_timout < -1))
3617 			return (EINVAL);
3618 
3619 		access = job_control_type(strioc.ic_cmd);
3620 		mutex_enter(&stp->sd_lock);
3621 		if ((access != -1) &&
3622 		    ((error = i_straccess(stp, access)) != 0)) {
3623 			mutex_exit(&stp->sd_lock);
3624 			return (error);
3625 		}
3626 		mutex_exit(&stp->sd_lock);
3627 
3628 		/*
3629 		 * The I_STR facility provides a trap door for malicious
3630 		 * code to send down bogus streamio(4I) ioctl commands to
3631 		 * unsuspecting STREAMS modules and drivers which expect to
3632 		 * only get these messages from the stream head.
3633 		 * Explicitly prohibit any streamio ioctls which can be
3634 		 * passed downstream by the stream head.  Note that we do
3635 		 * not block all streamio ioctls because the ioctl
3636 		 * numberspace is not well managed and thus it's possible
3637 		 * that a module or driver's ioctl numbers may accidentally
3638 		 * collide with them.
3639 		 */
3640 		switch (strioc.ic_cmd) {
3641 		case I_LINK:
3642 		case I_PLINK:
3643 		case I_UNLINK:
3644 		case I_PUNLINK:
3645 		case _I_GETPEERCRED:
3646 		case _I_PLINK_LH:
3647 			return (EINVAL);
3648 		}
3649 
3650 		error = strdoioctl(stp, &strioc, flag, copyflag, crp, rvalp);
3651 		if (error == 0) {
3652 			error = strcopyout_strioctl(&strioc, (void *)arg,
3653 			    flag, copyflag);
3654 		}
3655 		return (error);
3656 
3657 	case _I_CMD:
3658 		/*
3659 		 * Like I_STR, but without using M_IOC* messages and without
3660 		 * copyins/copyouts beyond the passed-in argument.
3661 		 */
3662 		if (stp->sd_flag & STRHUP)
3663 			return (ENXIO);
3664 
3665 		if (copyflag == U_TO_K) {
3666 			if ((scp = kmem_alloc(sizeof (strcmd_t),
3667 			    KM_NOSLEEP)) == NULL) {
3668 				return (ENOMEM);
3669 			}
3670 
3671 			if (copyin((void *)arg, scp, sizeof (strcmd_t))) {
3672 				kmem_free(scp, sizeof (strcmd_t));
3673 				return (EFAULT);
3674 			}
3675 		} else {
3676 			scp = (strcmd_t *)arg;
3677 		}
3678 
3679 		access = job_control_type(scp->sc_cmd);
3680 		mutex_enter(&stp->sd_lock);
3681 		if (access != -1 && (error = i_straccess(stp, access)) != 0) {
3682 			mutex_exit(&stp->sd_lock);
3683 			if (copyflag == U_TO_K)
3684 				kmem_free(scp, sizeof (strcmd_t));
3685 			return (error);
3686 		}
3687 		mutex_exit(&stp->sd_lock);
3688 
3689 		*rvalp = 0;
3690 		if ((error = strdocmd(stp, scp, crp)) == 0) {
3691 			if (copyflag == U_TO_K &&
3692 			    copyout(scp, (void *)arg, sizeof (strcmd_t))) {
3693 				error = EFAULT;
3694 			}
3695 		}
3696 		if (copyflag == U_TO_K)
3697 			kmem_free(scp, sizeof (strcmd_t));
3698 		return (error);
3699 
3700 	case I_NREAD:
3701 		/*
3702 		 * Return number of bytes of data in first message
3703 		 * in queue in "arg" and return the number of messages
3704 		 * in queue in return value.
3705 		 */
3706 	{
3707 		size_t	size;
3708 		int	retval;
3709 		int	count = 0;
3710 
3711 		mutex_enter(QLOCK(rdq));
3712 
3713 		size = msgdsize(rdq->q_first);
3714 		for (mp = rdq->q_first; mp != NULL; mp = mp->b_next)
3715 			count++;
3716 
3717 		mutex_exit(QLOCK(rdq));
3718 		if (stp->sd_struiordq) {
3719 			infod_t infod;
3720 
3721 			infod.d_cmd = INFOD_COUNT;
3722 			infod.d_count = 0;
3723 			if (count == 0) {
3724 				infod.d_cmd |= INFOD_FIRSTBYTES;
3725 				infod.d_bytes = 0;
3726 			}
3727 			infod.d_res = 0;
3728 			(void) infonext(rdq, &infod);
3729 			count += infod.d_count;
3730 			if (infod.d_res & INFOD_FIRSTBYTES)
3731 				size = infod.d_bytes;
3732 		}
3733 
3734 		/*
3735 		 * Drop down from size_t to the "int" required by the
3736 		 * interface.  Cap at INT_MAX.
3737 		 */
3738 		retval = MIN(size, INT_MAX);
3739 		error = strcopyout(&retval, (void *)arg, sizeof (retval),
3740 		    copyflag);
3741 		if (!error)
3742 			*rvalp = count;
3743 		return (error);
3744 	}
3745 
3746 	case FIONREAD:
3747 		/*
3748 		 * Return number of bytes of data in all data messages
3749 		 * in queue in "arg".
3750 		 */
3751 	{
3752 		size_t	size = 0;
3753 		int	retval;
3754 
3755 		mutex_enter(QLOCK(rdq));
3756 		for (mp = rdq->q_first; mp != NULL; mp = mp->b_next)
3757 			size += msgdsize(mp);
3758 		mutex_exit(QLOCK(rdq));
3759 
3760 		if (stp->sd_struiordq) {
3761 			infod_t infod;
3762 
3763 			infod.d_cmd = INFOD_BYTES;
3764 			infod.d_res = 0;
3765 			infod.d_bytes = 0;
3766 			(void) infonext(rdq, &infod);
3767 			size += infod.d_bytes;
3768 		}
3769 
3770 		/*
3771 		 * Drop down from size_t to the "int" required by the
3772 		 * interface.  Cap at INT_MAX.
3773 		 */
3774 		retval = MIN(size, INT_MAX);
3775 		error = strcopyout(&retval, (void *)arg, sizeof (retval),
3776 		    copyflag);
3777 
3778 		*rvalp = 0;
3779 		return (error);
3780 	}
3781 	case FIORDCHK:
3782 		/*
3783 		 * FIORDCHK does not use arg value (like FIONREAD),
3784 		 * instead a count is returned. I_NREAD value may
3785 		 * not be accurate but safe. The real thing to do is
3786 		 * to add the msgdsizes of all data  messages until
3787 		 * a non-data message.
3788 		 */
3789 	{
3790 		size_t size = 0;
3791 
3792 		mutex_enter(QLOCK(rdq));
3793 		for (mp = rdq->q_first; mp != NULL; mp = mp->b_next)
3794 			size += msgdsize(mp);
3795 		mutex_exit(QLOCK(rdq));
3796 
3797 		if (stp->sd_struiordq) {
3798 			infod_t infod;
3799 
3800 			infod.d_cmd = INFOD_BYTES;
3801 			infod.d_res = 0;
3802 			infod.d_bytes = 0;
3803 			(void) infonext(rdq, &infod);
3804 			size += infod.d_bytes;
3805 		}
3806 
3807 		/*
3808 		 * Since ioctl returns an int, and memory sizes under
3809 		 * LP64 may not fit, we return INT_MAX if the count was
3810 		 * actually greater.
3811 		 */
3812 		*rvalp = MIN(size, INT_MAX);
3813 		return (0);
3814 	}
3815 
3816 	case I_FIND:
3817 		/*
3818 		 * Get module name.
3819 		 */
3820 	{
3821 		char mname[FMNAMESZ + 1];
3822 		queue_t *q;
3823 
3824 		error = (copyflag & U_TO_K ? copyinstr : copystr)((void *)arg,
3825 		    mname, FMNAMESZ + 1, NULL);
3826 		if (error)
3827 			return ((error == ENAMETOOLONG) ? EINVAL : EFAULT);
3828 
3829 		/*
3830 		 * Return EINVAL if we're handed a bogus module name.
3831 		 */
3832 		if (fmodsw_find(mname, FMODSW_LOAD) == NULL) {
3833 			TRACE_0(TR_FAC_STREAMS_FR,
3834 			    TR_I_CANT_FIND, "couldn't I_FIND");
3835 			return (EINVAL);
3836 		}
3837 
3838 		*rvalp = 0;
3839 
3840 		/* Look downstream to see if module is there. */
3841 		claimstr(stp->sd_wrq);
3842 		for (q = stp->sd_wrq->q_next; q; q = q->q_next) {
3843 			if (q->q_flag & QREADR) {
3844 				q = NULL;
3845 				break;
3846 			}
3847 			if (strcmp(mname, Q2NAME(q)) == 0)
3848 				break;
3849 		}
3850 		releasestr(stp->sd_wrq);
3851 
3852 		*rvalp = (q ? 1 : 0);
3853 		return (error);
3854 	}
3855 
3856 	case I_PUSH:
3857 	case __I_PUSH_NOCTTY:
3858 		/*
3859 		 * Push a module.
3860 		 * For the case __I_PUSH_NOCTTY push a module but
3861 		 * do not allocate controlling tty. See bugid 4025044
3862 		 */
3863 
3864 	{
3865 		char mname[FMNAMESZ + 1];
3866 		fmodsw_impl_t *fp;
3867 		dev_t dummydev;
3868 
3869 		if (stp->sd_flag & STRHUP)
3870 			return (ENXIO);
3871 
3872 		/*
3873 		 * Get module name and look up in fmodsw.
3874 		 */
3875 		error = (copyflag & U_TO_K ? copyinstr : copystr)((void *)arg,
3876 		    mname, FMNAMESZ + 1, NULL);
3877 		if (error)
3878 			return ((error == ENAMETOOLONG) ? EINVAL : EFAULT);
3879 
3880 		if ((fp = fmodsw_find(mname, FMODSW_HOLD | FMODSW_LOAD)) ==
3881 		    NULL)
3882 			return (EINVAL);
3883 
3884 		TRACE_2(TR_FAC_STREAMS_FR, TR_I_PUSH,
3885 		    "I_PUSH:fp %p stp %p", fp, stp);
3886 
3887 		/*
3888 		 * If the module is flagged as single-instance, then check
3889 		 * to see if the module is already pushed. If it is, return
3890 		 * as if the push was successful.
3891 		 */
3892 		if (fp->f_qflag & _QSINGLE_INSTANCE) {
3893 			queue_t *q;
3894 
3895 			claimstr(stp->sd_wrq);
3896 			for (q = stp->sd_wrq->q_next; q; q = q->q_next) {
3897 				if (q->q_flag & QREADR) {
3898 					q = NULL;
3899 					break;
3900 				}
3901 				if (strcmp(mname, Q2NAME(q)) == 0)
3902 					break;
3903 			}
3904 			releasestr(stp->sd_wrq);
3905 			if (q != NULL) {
3906 				fmodsw_rele(fp);
3907 				return (0);
3908 			}
3909 		}
3910 
3911 		if (error = strstartplumb(stp, flag, cmd)) {
3912 			fmodsw_rele(fp);
3913 			return (error);
3914 		}
3915 
3916 		/*
3917 		 * See if any more modules can be pushed on this stream.
3918 		 * Note that this check must be done after strstartplumb()
3919 		 * since otherwise multiple threads issuing I_PUSHes on
3920 		 * the same stream will be able to exceed nstrpush.
3921 		 */
3922 		mutex_enter(&stp->sd_lock);
3923 		if (stp->sd_pushcnt >= nstrpush) {
3924 			fmodsw_rele(fp);
3925 			strendplumb(stp);
3926 			mutex_exit(&stp->sd_lock);
3927 			return (EINVAL);
3928 		}
3929 		mutex_exit(&stp->sd_lock);
3930 
3931 		/*
3932 		 * Push new module and call its open routine
3933 		 * via qattach().  Modules don't change device
3934 		 * numbers, so just ignore dummydev here.
3935 		 */
3936 		dummydev = vp->v_rdev;
3937 		if ((error = qattach(rdq, &dummydev, 0, crp, fp,
3938 		    B_FALSE)) == 0) {
3939 			if (vp->v_type == VCHR && /* sorry, no pipes allowed */
3940 			    (cmd == I_PUSH) && (stp->sd_flag & STRISTTY)) {
3941 				/*
3942 				 * try to allocate it as a controlling terminal
3943 				 */
3944 				(void) strctty(stp);
3945 			}
3946 		}
3947 
3948 		mutex_enter(&stp->sd_lock);
3949 
3950 		/*
3951 		 * As a performance concern we are caching the values of
3952 		 * q_minpsz and q_maxpsz of the module below the stream
3953 		 * head in the stream head.
3954 		 */
3955 		mutex_enter(QLOCK(stp->sd_wrq->q_next));
3956 		rmin = stp->sd_wrq->q_next->q_minpsz;
3957 		rmax = stp->sd_wrq->q_next->q_maxpsz;
3958 		mutex_exit(QLOCK(stp->sd_wrq->q_next));
3959 
3960 		/* Do this processing here as a performance concern */
3961 		if (strmsgsz != 0) {
3962 			if (rmax == INFPSZ)
3963 				rmax = strmsgsz;
3964 			else  {
3965 				if (vp->v_type == VFIFO)
3966 					rmax = MIN(PIPE_BUF, rmax);
3967 				else	rmax = MIN(strmsgsz, rmax);
3968 			}
3969 		}
3970 
3971 		mutex_enter(QLOCK(wrq));
3972 		stp->sd_qn_minpsz = rmin;
3973 		stp->sd_qn_maxpsz = rmax;
3974 		mutex_exit(QLOCK(wrq));
3975 
3976 		strendplumb(stp);
3977 		mutex_exit(&stp->sd_lock);
3978 		return (error);
3979 	}
3980 
3981 	case I_POP:
3982 	{
3983 		queue_t	*q;
3984 
3985 		if (stp->sd_flag & STRHUP)
3986 			return (ENXIO);
3987 		if (!wrq->q_next)	/* for broken pipes */
3988 			return (EINVAL);
3989 
3990 		if (error = strstartplumb(stp, flag, cmd))
3991 			return (error);
3992 
3993 		/*
3994 		 * If there is an anchor on this stream and popping
3995 		 * the current module would attempt to pop through the
3996 		 * anchor, then disallow the pop unless we have sufficient
3997 		 * privileges; take the cheapest (non-locking) check
3998 		 * first.
3999 		 */
4000 		if (secpolicy_ip_config(crp, B_TRUE) != 0 ||
4001 		    (stp->sd_anchorzone != crgetzoneid(crp))) {
4002 			mutex_enter(&stp->sd_lock);
4003 			/*
4004 			 * Anchors only apply if there's at least one
4005 			 * module on the stream (sd_pushcnt > 0).
4006 			 */
4007 			if (stp->sd_pushcnt > 0 &&
4008 			    stp->sd_pushcnt == stp->sd_anchor &&
4009 			    stp->sd_vnode->v_type != VFIFO) {
4010 				strendplumb(stp);
4011 				mutex_exit(&stp->sd_lock);
4012 				if (stp->sd_anchorzone != crgetzoneid(crp))
4013 					return (EINVAL);
4014 				/* Audit and report error */
4015 				return (secpolicy_ip_config(crp, B_FALSE));
4016 			}
4017 			mutex_exit(&stp->sd_lock);
4018 		}
4019 
4020 		q = wrq->q_next;
4021 		TRACE_2(TR_FAC_STREAMS_FR, TR_I_POP,
4022 		    "I_POP:%p from %p", q, stp);
4023 		if (q->q_next == NULL || (q->q_flag & (QREADR|QISDRV))) {
4024 			error = EINVAL;
4025 		} else {
4026 			qdetach(_RD(q), 1, flag, crp, B_FALSE);
4027 			error = 0;
4028 		}
4029 		mutex_enter(&stp->sd_lock);
4030 
4031 		/*
4032 		 * As a performance concern we are caching the values of
4033 		 * q_minpsz and q_maxpsz of the module below the stream
4034 		 * head in the stream head.
4035 		 */
4036 		mutex_enter(QLOCK(wrq->q_next));
4037 		rmin = wrq->q_next->q_minpsz;
4038 		rmax = wrq->q_next->q_maxpsz;
4039 		mutex_exit(QLOCK(wrq->q_next));
4040 
4041 		/* Do this processing here as a performance concern */
4042 		if (strmsgsz != 0) {
4043 			if (rmax == INFPSZ)
4044 				rmax = strmsgsz;
4045 			else  {
4046 				if (vp->v_type == VFIFO)
4047 					rmax = MIN(PIPE_BUF, rmax);
4048 				else	rmax = MIN(strmsgsz, rmax);
4049 			}
4050 		}
4051 
4052 		mutex_enter(QLOCK(wrq));
4053 		stp->sd_qn_minpsz = rmin;
4054 		stp->sd_qn_maxpsz = rmax;
4055 		mutex_exit(QLOCK(wrq));
4056 
4057 		/* If we popped through the anchor, then reset the anchor. */
4058 		if (stp->sd_pushcnt < stp->sd_anchor) {
4059 			stp->sd_anchor = 0;
4060 			stp->sd_anchorzone = 0;
4061 		}
4062 		strendplumb(stp);
4063 		mutex_exit(&stp->sd_lock);
4064 		return (error);
4065 	}
4066 
4067 	case _I_MUXID2FD:
4068 	{
4069 		/*
4070 		 * Create a fd for a I_PLINK'ed lower stream with a given
4071 		 * muxid.  With the fd, application can send down ioctls,
4072 		 * like I_LIST, to the previously I_PLINK'ed stream.  Note
4073 		 * that after getting the fd, the application has to do an
4074 		 * I_PUNLINK on the muxid before it can do any operation
4075 		 * on the lower stream.  This is required by spec1170.
4076 		 *
4077 		 * The fd used to do this ioctl should point to the same
4078 		 * controlling device used to do the I_PLINK.  If it uses
4079 		 * a different stream or an invalid muxid, I_MUXID2FD will
4080 		 * fail.  The error code is set to EINVAL.
4081 		 *
4082 		 * The intended use of this interface is the following.
4083 		 * An application I_PLINK'ed a stream and exits.  The fd
4084 		 * to the lower stream is gone.  Another application
4085 		 * wants to get a fd to the lower stream, it uses I_MUXID2FD.
4086 		 */
4087 		int muxid = (int)arg;
4088 		int fd;
4089 		linkinfo_t *linkp;
4090 		struct file *fp;
4091 		netstack_t *ns;
4092 		str_stack_t *ss;
4093 
4094 		/*
4095 		 * Do not allow the wildcard muxid.  This ioctl is not
4096 		 * intended to find arbitrary link.
4097 		 */
4098 		if (muxid == 0) {
4099 			return (EINVAL);
4100 		}
4101 
4102 		ns = netstack_find_by_cred(crp);
4103 		ASSERT(ns != NULL);
4104 		ss = ns->netstack_str;
4105 		ASSERT(ss != NULL);
4106 
4107 		mutex_enter(&muxifier);
4108 		linkp = findlinks(vp->v_stream, muxid, LINKPERSIST, ss);
4109 		if (linkp == NULL) {
4110 			mutex_exit(&muxifier);
4111 			netstack_rele(ss->ss_netstack);
4112 			return (EINVAL);
4113 		}
4114 
4115 		if ((fd = ufalloc(0)) == -1) {
4116 			mutex_exit(&muxifier);
4117 			netstack_rele(ss->ss_netstack);
4118 			return (EMFILE);
4119 		}
4120 		fp = linkp->li_fpdown;
4121 		mutex_enter(&fp->f_tlock);
4122 		fp->f_count++;
4123 		mutex_exit(&fp->f_tlock);
4124 		mutex_exit(&muxifier);
4125 		setf(fd, fp);
4126 		*rvalp = fd;
4127 		netstack_rele(ss->ss_netstack);
4128 		return (0);
4129 	}
4130 
4131 	case _I_INSERT:
4132 	{
4133 		/*
4134 		 * To insert a module to a given position in a stream.
4135 		 * In the first release, only allow privileged user
4136 		 * to use this ioctl. Furthermore, the insert is only allowed
4137 		 * below an anchor if the zoneid is the same as the zoneid
4138 		 * which created the anchor.
4139 		 *
4140 		 * Note that we do not plan to support this ioctl
4141 		 * on pipes in the first release.  We want to learn more
4142 		 * about the implications of these ioctls before extending
4143 		 * their support.  And we do not think these features are
4144 		 * valuable for pipes.
4145 		 */
4146 		STRUCT_DECL(strmodconf, strmodinsert);
4147 		char mod_name[FMNAMESZ + 1];
4148 		fmodsw_impl_t *fp;
4149 		dev_t dummydev;
4150 		queue_t *tmp_wrq;
4151 		int pos;
4152 		boolean_t is_insert;
4153 
4154 		STRUCT_INIT(strmodinsert, flag);
4155 		if (stp->sd_flag & STRHUP)
4156 			return (ENXIO);
4157 		if (STRMATED(stp))
4158 			return (EINVAL);
4159 		if ((error = secpolicy_net_config(crp, B_FALSE)) != 0)
4160 			return (error);
4161 		if (stp->sd_anchor != 0 &&
4162 		    stp->sd_anchorzone != crgetzoneid(crp))
4163 			return (EINVAL);
4164 
4165 		error = strcopyin((void *)arg, STRUCT_BUF(strmodinsert),
4166 		    STRUCT_SIZE(strmodinsert), copyflag);
4167 		if (error)
4168 			return (error);
4169 
4170 		/*
4171 		 * Get module name and look up in fmodsw.
4172 		 */
4173 		error = (copyflag & U_TO_K ? copyinstr :
4174 		    copystr)(STRUCT_FGETP(strmodinsert, mod_name),
4175 		    mod_name, FMNAMESZ + 1, NULL);
4176 		if (error)
4177 			return ((error == ENAMETOOLONG) ? EINVAL : EFAULT);
4178 
4179 		if ((fp = fmodsw_find(mod_name, FMODSW_HOLD | FMODSW_LOAD)) ==
4180 		    NULL)
4181 			return (EINVAL);
4182 
4183 		if (error = strstartplumb(stp, flag, cmd)) {
4184 			fmodsw_rele(fp);
4185 			return (error);
4186 		}
4187 
4188 		/*
4189 		 * Is this _I_INSERT just like an I_PUSH?  We need to know
4190 		 * this because we do some optimizations if this is a
4191 		 * module being pushed.
4192 		 */
4193 		pos = STRUCT_FGET(strmodinsert, pos);
4194 		is_insert = (pos != 0);
4195 
4196 		/*
4197 		 * Make sure pos is valid.  Even though it is not an I_PUSH,
4198 		 * we impose the same limit on the number of modules in a
4199 		 * stream.
4200 		 */
4201 		mutex_enter(&stp->sd_lock);
4202 		if (stp->sd_pushcnt >= nstrpush || pos < 0 ||
4203 		    pos > stp->sd_pushcnt) {
4204 			fmodsw_rele(fp);
4205 			strendplumb(stp);
4206 			mutex_exit(&stp->sd_lock);
4207 			return (EINVAL);
4208 		}
4209 		if (stp->sd_anchor != 0) {
4210 			/*
4211 			 * Is this insert below the anchor?
4212 			 * Pushcnt hasn't been increased yet hence
4213 			 * we test for greater than here, and greater or
4214 			 * equal after qattach.
4215 			 */
4216 			if (pos > (stp->sd_pushcnt - stp->sd_anchor) &&
4217 			    stp->sd_anchorzone != crgetzoneid(crp)) {
4218 				fmodsw_rele(fp);
4219 				strendplumb(stp);
4220 				mutex_exit(&stp->sd_lock);
4221 				return (EPERM);
4222 			}
4223 		}
4224 
4225 		mutex_exit(&stp->sd_lock);
4226 
4227 		/*
4228 		 * First find the correct position this module to
4229 		 * be inserted.  We don't need to call claimstr()
4230 		 * as the stream should not be changing at this point.
4231 		 *
4232 		 * Insert new module and call its open routine
4233 		 * via qattach().  Modules don't change device
4234 		 * numbers, so just ignore dummydev here.
4235 		 */
4236 		for (tmp_wrq = stp->sd_wrq; pos > 0;
4237 		    tmp_wrq = tmp_wrq->q_next, pos--) {
4238 			ASSERT(SAMESTR(tmp_wrq));
4239 		}
4240 		dummydev = vp->v_rdev;
4241 		if ((error = qattach(_RD(tmp_wrq), &dummydev, 0, crp,
4242 		    fp, is_insert)) != 0) {
4243 			mutex_enter(&stp->sd_lock);
4244 			strendplumb(stp);
4245 			mutex_exit(&stp->sd_lock);
4246 			return (error);
4247 		}
4248 
4249 		mutex_enter(&stp->sd_lock);
4250 
4251 		/*
4252 		 * As a performance concern we are caching the values of
4253 		 * q_minpsz and q_maxpsz of the module below the stream
4254 		 * head in the stream head.
4255 		 */
4256 		if (!is_insert) {
4257 			mutex_enter(QLOCK(stp->sd_wrq->q_next));
4258 			rmin = stp->sd_wrq->q_next->q_minpsz;
4259 			rmax = stp->sd_wrq->q_next->q_maxpsz;
4260 			mutex_exit(QLOCK(stp->sd_wrq->q_next));
4261 
4262 			/* Do this processing here as a performance concern */
4263 			if (strmsgsz != 0) {
4264 				if (rmax == INFPSZ) {
4265 					rmax = strmsgsz;
4266 				} else  {
4267 					rmax = MIN(strmsgsz, rmax);
4268 				}
4269 			}
4270 
4271 			mutex_enter(QLOCK(wrq));
4272 			stp->sd_qn_minpsz = rmin;
4273 			stp->sd_qn_maxpsz = rmax;
4274 			mutex_exit(QLOCK(wrq));
4275 		}
4276 
4277 		/*
4278 		 * Need to update the anchor value if this module is
4279 		 * inserted below the anchor point.
4280 		 */
4281 		if (stp->sd_anchor != 0) {
4282 			pos = STRUCT_FGET(strmodinsert, pos);
4283 			if (pos >= (stp->sd_pushcnt - stp->sd_anchor))
4284 				stp->sd_anchor++;
4285 		}
4286 
4287 		strendplumb(stp);
4288 		mutex_exit(&stp->sd_lock);
4289 		return (0);
4290 	}
4291 
4292 	case _I_REMOVE:
4293 	{
4294 		/*
4295 		 * To remove a module with a given name in a stream.  The
4296 		 * caller of this ioctl needs to provide both the name and
4297 		 * the position of the module to be removed.  This eliminates
4298 		 * the ambiguity of removal if a module is inserted/pushed
4299 		 * multiple times in a stream.  In the first release, only
4300 		 * allow privileged user to use this ioctl.
4301 		 * Furthermore, the remove is only allowed
4302 		 * below an anchor if the zoneid is the same as the zoneid
4303 		 * which created the anchor.
4304 		 *
4305 		 * Note that we do not plan to support this ioctl
4306 		 * on pipes in the first release.  We want to learn more
4307 		 * about the implications of these ioctls before extending
4308 		 * their support.  And we do not think these features are
4309 		 * valuable for pipes.
4310 		 *
4311 		 * Also note that _I_REMOVE cannot be used to remove a
4312 		 * driver or the stream head.
4313 		 */
4314 		STRUCT_DECL(strmodconf, strmodremove);
4315 		queue_t	*q;
4316 		int pos;
4317 		char mod_name[FMNAMESZ + 1];
4318 		boolean_t is_remove;
4319 
4320 		STRUCT_INIT(strmodremove, flag);
4321 		if (stp->sd_flag & STRHUP)
4322 			return (ENXIO);
4323 		if (STRMATED(stp))
4324 			return (EINVAL);
4325 		if ((error = secpolicy_net_config(crp, B_FALSE)) != 0)
4326 			return (error);
4327 		if (stp->sd_anchor != 0 &&
4328 		    stp->sd_anchorzone != crgetzoneid(crp))
4329 			return (EINVAL);
4330 
4331 		error = strcopyin((void *)arg, STRUCT_BUF(strmodremove),
4332 		    STRUCT_SIZE(strmodremove), copyflag);
4333 		if (error)
4334 			return (error);
4335 
4336 		error = (copyflag & U_TO_K ? copyinstr :
4337 		    copystr)(STRUCT_FGETP(strmodremove, mod_name),
4338 		    mod_name, FMNAMESZ + 1, NULL);
4339 		if (error)
4340 			return ((error == ENAMETOOLONG) ? EINVAL : EFAULT);
4341 
4342 		if ((error = strstartplumb(stp, flag, cmd)) != 0)
4343 			return (error);
4344 
4345 		/*
4346 		 * Match the name of given module to the name of module at
4347 		 * the given position.
4348 		 */
4349 		pos = STRUCT_FGET(strmodremove, pos);
4350 
4351 		is_remove = (pos != 0);
4352 		for (q = stp->sd_wrq->q_next; SAMESTR(q) && pos > 0;
4353 		    q = q->q_next, pos--)
4354 			;
4355 		if (pos > 0 || !SAMESTR(q) ||
4356 		    strcmp(Q2NAME(q), mod_name) != 0) {
4357 			mutex_enter(&stp->sd_lock);
4358 			strendplumb(stp);
4359 			mutex_exit(&stp->sd_lock);
4360 			return (EINVAL);
4361 		}
4362 
4363 		/*
4364 		 * If the position is at or below an anchor, then the zoneid
4365 		 * must match the zoneid that created the anchor.
4366 		 */
4367 		if (stp->sd_anchor != 0) {
4368 			pos = STRUCT_FGET(strmodremove, pos);
4369 			if (pos >= (stp->sd_pushcnt - stp->sd_anchor) &&
4370 			    stp->sd_anchorzone != crgetzoneid(crp)) {
4371 				mutex_enter(&stp->sd_lock);
4372 				strendplumb(stp);
4373 				mutex_exit(&stp->sd_lock);
4374 				return (EPERM);
4375 			}
4376 		}
4377 
4378 
4379 		ASSERT(!(q->q_flag & QREADR));
4380 		qdetach(_RD(q), 1, flag, crp, is_remove);
4381 
4382 		mutex_enter(&stp->sd_lock);
4383 
4384 		/*
4385 		 * As a performance concern we are caching the values of
4386 		 * q_minpsz and q_maxpsz of the module below the stream
4387 		 * head in the stream head.
4388 		 */
4389 		if (!is_remove) {
4390 			mutex_enter(QLOCK(wrq->q_next));
4391 			rmin = wrq->q_next->q_minpsz;
4392 			rmax = wrq->q_next->q_maxpsz;
4393 			mutex_exit(QLOCK(wrq->q_next));
4394 
4395 			/* Do this processing here as a performance concern */
4396 			if (strmsgsz != 0) {
4397 				if (rmax == INFPSZ)
4398 					rmax = strmsgsz;
4399 				else  {
4400 					if (vp->v_type == VFIFO)
4401 						rmax = MIN(PIPE_BUF, rmax);
4402 					else	rmax = MIN(strmsgsz, rmax);
4403 				}
4404 			}
4405 
4406 			mutex_enter(QLOCK(wrq));
4407 			stp->sd_qn_minpsz = rmin;
4408 			stp->sd_qn_maxpsz = rmax;
4409 			mutex_exit(QLOCK(wrq));
4410 		}
4411 
4412 		/*
4413 		 * Need to update the anchor value if this module is removed
4414 		 * at or below the anchor point.  If the removed module is at
4415 		 * the anchor point, remove the anchor for this stream if
4416 		 * there is no module above the anchor point.  Otherwise, if
4417 		 * the removed module is below the anchor point, decrement the
4418 		 * anchor point by 1.
4419 		 */
4420 		if (stp->sd_anchor != 0) {
4421 			pos = STRUCT_FGET(strmodremove, pos);
4422 			if (pos == stp->sd_pushcnt - stp->sd_anchor + 1)
4423 				stp->sd_anchor = 0;
4424 			else if (pos > (stp->sd_pushcnt - stp->sd_anchor + 1))
4425 				stp->sd_anchor--;
4426 		}
4427 
4428 		strendplumb(stp);
4429 		mutex_exit(&stp->sd_lock);
4430 		return (0);
4431 	}
4432 
4433 	case I_ANCHOR:
4434 		/*
4435 		 * Set the anchor position on the stream to reside at
4436 		 * the top module (in other words, the top module
4437 		 * cannot be popped).  Anchors with a FIFO make no
4438 		 * obvious sense, so they're not allowed.
4439 		 */
4440 		mutex_enter(&stp->sd_lock);
4441 
4442 		if (stp->sd_vnode->v_type == VFIFO) {
4443 			mutex_exit(&stp->sd_lock);
4444 			return (EINVAL);
4445 		}
4446 		/* Only allow the same zoneid to update the anchor */
4447 		if (stp->sd_anchor != 0 &&
4448 		    stp->sd_anchorzone != crgetzoneid(crp)) {
4449 			mutex_exit(&stp->sd_lock);
4450 			return (EINVAL);
4451 		}
4452 		stp->sd_anchor = stp->sd_pushcnt;
4453 		stp->sd_anchorzone = crgetzoneid(crp);
4454 		mutex_exit(&stp->sd_lock);
4455 		return (0);
4456 
4457 	case I_LOOK:
4458 		/*
4459 		 * Get name of first module downstream.
4460 		 * If no module, return an error.
4461 		 */
4462 		claimstr(wrq);
4463 		if (_SAMESTR(wrq) && wrq->q_next->q_next != NULL) {
4464 			char *name = Q2NAME(wrq->q_next);
4465 
4466 			error = strcopyout(name, (void *)arg, strlen(name) + 1,
4467 			    copyflag);
4468 			releasestr(wrq);
4469 			return (error);
4470 		}
4471 		releasestr(wrq);
4472 		return (EINVAL);
4473 
4474 	case I_LINK:
4475 	case I_PLINK:
4476 		/*
4477 		 * Link a multiplexor.
4478 		 */
4479 		return (mlink(vp, cmd, (int)arg, crp, rvalp, 0));
4480 
4481 	case _I_PLINK_LH:
4482 		/*
4483 		 * Link a multiplexor: Call must originate from kernel.
4484 		 */
4485 		if (kioctl)
4486 			return (ldi_mlink_lh(vp, cmd, arg, crp, rvalp));
4487 
4488 		return (EINVAL);
4489 	case I_UNLINK:
4490 	case I_PUNLINK:
4491 		/*
4492 		 * Unlink a multiplexor.
4493 		 * If arg is -1, unlink all links for which this is the
4494 		 * controlling stream.  Otherwise, arg is an index number
4495 		 * for a link to be removed.
4496 		 */
4497 	{
4498 		struct linkinfo *linkp;
4499 		int native_arg = (int)arg;
4500 		int type;
4501 		netstack_t *ns;
4502 		str_stack_t *ss;
4503 
4504 		TRACE_1(TR_FAC_STREAMS_FR,
4505 		    TR_I_UNLINK, "I_UNLINK/I_PUNLINK:%p", stp);
4506 		if (vp->v_type == VFIFO) {
4507 			return (EINVAL);
4508 		}
4509 		if (cmd == I_UNLINK)
4510 			type = LINKNORMAL;
4511 		else	/* I_PUNLINK */
4512 			type = LINKPERSIST;
4513 		if (native_arg == 0) {
4514 			return (EINVAL);
4515 		}
4516 		ns = netstack_find_by_cred(crp);
4517 		ASSERT(ns != NULL);
4518 		ss = ns->netstack_str;
4519 		ASSERT(ss != NULL);
4520 
4521 		if (native_arg == MUXID_ALL)
4522 			error = munlinkall(stp, type, crp, rvalp, ss);
4523 		else {
4524 			mutex_enter(&muxifier);
4525 			if (!(linkp = findlinks(stp, (int)arg, type, ss))) {
4526 				/* invalid user supplied index number */
4527 				mutex_exit(&muxifier);
4528 				netstack_rele(ss->ss_netstack);
4529 				return (EINVAL);
4530 			}
4531 			/* munlink drops the muxifier lock */
4532 			error = munlink(stp, linkp, type, crp, rvalp, ss);
4533 		}
4534 		netstack_rele(ss->ss_netstack);
4535 		return (error);
4536 	}
4537 
4538 	case I_FLUSH:
4539 		/*
4540 		 * send a flush message downstream
4541 		 * flush message can indicate
4542 		 * FLUSHR - flush read queue
4543 		 * FLUSHW - flush write queue
4544 		 * FLUSHRW - flush read/write queue
4545 		 */
4546 		if (stp->sd_flag & STRHUP)
4547 			return (ENXIO);
4548 		if (arg & ~FLUSHRW)
4549 			return (EINVAL);
4550 
4551 		for (;;) {
4552 			if (putnextctl1(stp->sd_wrq, M_FLUSH, (int)arg)) {
4553 				break;
4554 			}
4555 			if (error = strwaitbuf(1, BPRI_HI)) {
4556 				return (error);
4557 			}
4558 		}
4559 
4560 		/*
4561 		 * Send down an unsupported ioctl and wait for the nack
4562 		 * in order to allow the M_FLUSH to propagate back
4563 		 * up to the stream head.
4564 		 * Replaces if (qready()) runqueues();
4565 		 */
4566 		strioc.ic_cmd = -1;	/* The unsupported ioctl */
4567 		strioc.ic_timout = 0;
4568 		strioc.ic_len = 0;
4569 		strioc.ic_dp = NULL;
4570 		(void) strdoioctl(stp, &strioc, flag, K_TO_K, crp, rvalp);
4571 		*rvalp = 0;
4572 		return (0);
4573 
4574 	case I_FLUSHBAND:
4575 	{
4576 		struct bandinfo binfo;
4577 
4578 		error = strcopyin((void *)arg, &binfo, sizeof (binfo),
4579 		    copyflag);
4580 		if (error)
4581 			return (error);
4582 		if (stp->sd_flag & STRHUP)
4583 			return (ENXIO);
4584 		if (binfo.bi_flag & ~FLUSHRW)
4585 			return (EINVAL);
4586 		while (!(mp = allocb(2, BPRI_HI))) {
4587 			if (error = strwaitbuf(2, BPRI_HI))
4588 				return (error);
4589 		}
4590 		mp->b_datap->db_type = M_FLUSH;
4591 		*mp->b_wptr++ = binfo.bi_flag | FLUSHBAND;
4592 		*mp->b_wptr++ = binfo.bi_pri;
4593 		putnext(stp->sd_wrq, mp);
4594 		/*
4595 		 * Send down an unsupported ioctl and wait for the nack
4596 		 * in order to allow the M_FLUSH to propagate back
4597 		 * up to the stream head.
4598 		 * Replaces if (qready()) runqueues();
4599 		 */
4600 		strioc.ic_cmd = -1;	/* The unsupported ioctl */
4601 		strioc.ic_timout = 0;
4602 		strioc.ic_len = 0;
4603 		strioc.ic_dp = NULL;
4604 		(void) strdoioctl(stp, &strioc, flag, K_TO_K, crp, rvalp);
4605 		*rvalp = 0;
4606 		return (0);
4607 	}
4608 
4609 	case I_SRDOPT:
4610 		/*
4611 		 * Set read options
4612 		 *
4613 		 * RNORM - default stream mode
4614 		 * RMSGN - message no discard
4615 		 * RMSGD - message discard
4616 		 * RPROTNORM - fail read with EBADMSG for M_[PC]PROTOs
4617 		 * RPROTDAT - convert M_[PC]PROTOs to M_DATAs
4618 		 * RPROTDIS - discard M_[PC]PROTOs and retain M_DATAs
4619 		 */
4620 		if (arg & ~(RMODEMASK | RPROTMASK))
4621 			return (EINVAL);
4622 
4623 		if ((arg & (RMSGD|RMSGN)) == (RMSGD|RMSGN))
4624 			return (EINVAL);
4625 
4626 		mutex_enter(&stp->sd_lock);
4627 		switch (arg & RMODEMASK) {
4628 		case RNORM:
4629 			stp->sd_read_opt &= ~(RD_MSGDIS | RD_MSGNODIS);
4630 			break;
4631 		case RMSGD:
4632 			stp->sd_read_opt = (stp->sd_read_opt & ~RD_MSGNODIS) |
4633 			    RD_MSGDIS;
4634 			break;
4635 		case RMSGN:
4636 			stp->sd_read_opt = (stp->sd_read_opt & ~RD_MSGDIS) |
4637 			    RD_MSGNODIS;
4638 			break;
4639 		}
4640 
4641 		switch (arg & RPROTMASK) {
4642 		case RPROTNORM:
4643 			stp->sd_read_opt &= ~(RD_PROTDAT | RD_PROTDIS);
4644 			break;
4645 
4646 		case RPROTDAT:
4647 			stp->sd_read_opt = ((stp->sd_read_opt & ~RD_PROTDIS) |
4648 			    RD_PROTDAT);
4649 			break;
4650 
4651 		case RPROTDIS:
4652 			stp->sd_read_opt = ((stp->sd_read_opt & ~RD_PROTDAT) |
4653 			    RD_PROTDIS);
4654 			break;
4655 		}
4656 		mutex_exit(&stp->sd_lock);
4657 		return (0);
4658 
4659 	case I_GRDOPT:
4660 		/*
4661 		 * Get read option and return the value
4662 		 * to spot pointed to by arg
4663 		 */
4664 	{
4665 		int rdopt;
4666 
4667 		rdopt = ((stp->sd_read_opt & RD_MSGDIS) ? RMSGD :
4668 		    ((stp->sd_read_opt & RD_MSGNODIS) ? RMSGN : RNORM));
4669 		rdopt |= ((stp->sd_read_opt & RD_PROTDAT) ? RPROTDAT :
4670 		    ((stp->sd_read_opt & RD_PROTDIS) ? RPROTDIS : RPROTNORM));
4671 
4672 		return (strcopyout(&rdopt, (void *)arg, sizeof (int),
4673 		    copyflag));
4674 	}
4675 
4676 	case I_SERROPT:
4677 		/*
4678 		 * Set error options
4679 		 *
4680 		 * RERRNORM - persistent read errors
4681 		 * RERRNONPERSIST - non-persistent read errors
4682 		 * WERRNORM - persistent write errors
4683 		 * WERRNONPERSIST - non-persistent write errors
4684 		 */
4685 		if (arg & ~(RERRMASK | WERRMASK))
4686 			return (EINVAL);
4687 
4688 		mutex_enter(&stp->sd_lock);
4689 		switch (arg & RERRMASK) {
4690 		case RERRNORM:
4691 			stp->sd_flag &= ~STRDERRNONPERSIST;
4692 			break;
4693 		case RERRNONPERSIST:
4694 			stp->sd_flag |= STRDERRNONPERSIST;
4695 			break;
4696 		}
4697 		switch (arg & WERRMASK) {
4698 		case WERRNORM:
4699 			stp->sd_flag &= ~STWRERRNONPERSIST;
4700 			break;
4701 		case WERRNONPERSIST:
4702 			stp->sd_flag |= STWRERRNONPERSIST;
4703 			break;
4704 		}
4705 		mutex_exit(&stp->sd_lock);
4706 		return (0);
4707 
4708 	case I_GERROPT:
4709 		/*
4710 		 * Get error option and return the value
4711 		 * to spot pointed to by arg
4712 		 */
4713 	{
4714 		int erropt = 0;
4715 
4716 		erropt |= (stp->sd_flag & STRDERRNONPERSIST) ? RERRNONPERSIST :
4717 		    RERRNORM;
4718 		erropt |= (stp->sd_flag & STWRERRNONPERSIST) ? WERRNONPERSIST :
4719 		    WERRNORM;
4720 		return (strcopyout(&erropt, (void *)arg, sizeof (int),
4721 		    copyflag));
4722 	}
4723 
4724 	case I_SETSIG:
4725 		/*
4726 		 * Register the calling proc to receive the SIGPOLL
4727 		 * signal based on the events given in arg.  If
4728 		 * arg is zero, remove the proc from register list.
4729 		 */
4730 	{
4731 		strsig_t *ssp, *pssp;
4732 		struct pid *pidp;
4733 
4734 		pssp = NULL;
4735 		pidp = curproc->p_pidp;
4736 		/*
4737 		 * Hold sd_lock to prevent traversal of sd_siglist while
4738 		 * it is modified.
4739 		 */
4740 		mutex_enter(&stp->sd_lock);
4741 		for (ssp = stp->sd_siglist; ssp && (ssp->ss_pidp != pidp);
4742 		    pssp = ssp, ssp = ssp->ss_next)
4743 			;
4744 
4745 		if (arg) {
4746 			if (arg & ~(S_INPUT|S_HIPRI|S_MSG|S_HANGUP|S_ERROR|
4747 			    S_RDNORM|S_WRNORM|S_RDBAND|S_WRBAND|S_BANDURG)) {
4748 				mutex_exit(&stp->sd_lock);
4749 				return (EINVAL);
4750 			}
4751 			if ((arg & S_BANDURG) && !(arg & S_RDBAND)) {
4752 				mutex_exit(&stp->sd_lock);
4753 				return (EINVAL);
4754 			}
4755 
4756 			/*
4757 			 * If proc not already registered, add it
4758 			 * to list.
4759 			 */
4760 			if (!ssp) {
4761 				ssp = kmem_alloc(sizeof (strsig_t), KM_SLEEP);
4762 				ssp->ss_pidp = pidp;
4763 				ssp->ss_pid = pidp->pid_id;
4764 				ssp->ss_next = NULL;
4765 				if (pssp)
4766 					pssp->ss_next = ssp;
4767 				else
4768 					stp->sd_siglist = ssp;
4769 				mutex_enter(&pidlock);
4770 				PID_HOLD(pidp);
4771 				mutex_exit(&pidlock);
4772 			}
4773 
4774 			/*
4775 			 * Set events.
4776 			 */
4777 			ssp->ss_events = (int)arg;
4778 		} else {
4779 			/*
4780 			 * Remove proc from register list.
4781 			 */
4782 			if (ssp) {
4783 				mutex_enter(&pidlock);
4784 				PID_RELE(pidp);
4785 				mutex_exit(&pidlock);
4786 				if (pssp)
4787 					pssp->ss_next = ssp->ss_next;
4788 				else
4789 					stp->sd_siglist = ssp->ss_next;
4790 				kmem_free(ssp, sizeof (strsig_t));
4791 			} else {
4792 				mutex_exit(&stp->sd_lock);
4793 				return (EINVAL);
4794 			}
4795 		}
4796 
4797 		/*
4798 		 * Recalculate OR of sig events.
4799 		 */
4800 		stp->sd_sigflags = 0;
4801 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
4802 			stp->sd_sigflags |= ssp->ss_events;
4803 		mutex_exit(&stp->sd_lock);
4804 		return (0);
4805 	}
4806 
4807 	case I_GETSIG:
4808 		/*
4809 		 * Return (in arg) the current registration of events
4810 		 * for which the calling proc is to be signaled.
4811 		 */
4812 	{
4813 		struct strsig *ssp;
4814 		struct pid  *pidp;
4815 
4816 		pidp = curproc->p_pidp;
4817 		mutex_enter(&stp->sd_lock);
4818 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
4819 			if (ssp->ss_pidp == pidp) {
4820 				error = strcopyout(&ssp->ss_events, (void *)arg,
4821 				    sizeof (int), copyflag);
4822 				mutex_exit(&stp->sd_lock);
4823 				return (error);
4824 			}
4825 		mutex_exit(&stp->sd_lock);
4826 		return (EINVAL);
4827 	}
4828 
4829 	case I_ESETSIG:
4830 		/*
4831 		 * Register the ss_pid to receive the SIGPOLL
4832 		 * signal based on the events is ss_events arg.  If
4833 		 * ss_events is zero, remove the proc from register list.
4834 		 */
4835 	{
4836 		struct strsig *ssp, *pssp;
4837 		struct proc *proc;
4838 		struct pid  *pidp;
4839 		pid_t pid;
4840 		struct strsigset ss;
4841 
4842 		error = strcopyin((void *)arg, &ss, sizeof (ss), copyflag);
4843 		if (error)
4844 			return (error);
4845 
4846 		pid = ss.ss_pid;
4847 
4848 		if (ss.ss_events != 0) {
4849 			/*
4850 			 * Permissions check by sending signal 0.
4851 			 * Note that when kill fails it does a set_errno
4852 			 * causing the system call to fail.
4853 			 */
4854 			error = kill(pid, 0);
4855 			if (error) {
4856 				return (error);
4857 			}
4858 		}
4859 		mutex_enter(&pidlock);
4860 		if (pid == 0)
4861 			proc = curproc;
4862 		else if (pid < 0)
4863 			proc = pgfind(-pid);
4864 		else
4865 			proc = prfind(pid);
4866 		if (proc == NULL) {
4867 			mutex_exit(&pidlock);
4868 			return (ESRCH);
4869 		}
4870 		if (pid < 0)
4871 			pidp = proc->p_pgidp;
4872 		else
4873 			pidp = proc->p_pidp;
4874 		ASSERT(pidp);
4875 		/*
4876 		 * Get a hold on the pid structure while referencing it.
4877 		 * There is a separate PID_HOLD should it be inserted
4878 		 * in the list below.
4879 		 */
4880 		PID_HOLD(pidp);
4881 		mutex_exit(&pidlock);
4882 
4883 		pssp = NULL;
4884 		/*
4885 		 * Hold sd_lock to prevent traversal of sd_siglist while
4886 		 * it is modified.
4887 		 */
4888 		mutex_enter(&stp->sd_lock);
4889 		for (ssp = stp->sd_siglist; ssp && (ssp->ss_pid != pid);
4890 		    pssp = ssp, ssp = ssp->ss_next)
4891 			;
4892 
4893 		if (ss.ss_events) {
4894 			if (ss.ss_events &
4895 			    ~(S_INPUT|S_HIPRI|S_MSG|S_HANGUP|S_ERROR|
4896 			    S_RDNORM|S_WRNORM|S_RDBAND|S_WRBAND|S_BANDURG)) {
4897 				mutex_exit(&stp->sd_lock);
4898 				mutex_enter(&pidlock);
4899 				PID_RELE(pidp);
4900 				mutex_exit(&pidlock);
4901 				return (EINVAL);
4902 			}
4903 			if ((ss.ss_events & S_BANDURG) &&
4904 			    !(ss.ss_events & S_RDBAND)) {
4905 				mutex_exit(&stp->sd_lock);
4906 				mutex_enter(&pidlock);
4907 				PID_RELE(pidp);
4908 				mutex_exit(&pidlock);
4909 				return (EINVAL);
4910 			}
4911 
4912 			/*
4913 			 * If proc not already registered, add it
4914 			 * to list.
4915 			 */
4916 			if (!ssp) {
4917 				ssp = kmem_alloc(sizeof (strsig_t), KM_SLEEP);
4918 				ssp->ss_pidp = pidp;
4919 				ssp->ss_pid = pid;
4920 				ssp->ss_next = NULL;
4921 				if (pssp)
4922 					pssp->ss_next = ssp;
4923 				else
4924 					stp->sd_siglist = ssp;
4925 				mutex_enter(&pidlock);
4926 				PID_HOLD(pidp);
4927 				mutex_exit(&pidlock);
4928 			}
4929 
4930 			/*
4931 			 * Set events.
4932 			 */
4933 			ssp->ss_events = ss.ss_events;
4934 		} else {
4935 			/*
4936 			 * Remove proc from register list.
4937 			 */
4938 			if (ssp) {
4939 				mutex_enter(&pidlock);
4940 				PID_RELE(pidp);
4941 				mutex_exit(&pidlock);
4942 				if (pssp)
4943 					pssp->ss_next = ssp->ss_next;
4944 				else
4945 					stp->sd_siglist = ssp->ss_next;
4946 				kmem_free(ssp, sizeof (strsig_t));
4947 			} else {
4948 				mutex_exit(&stp->sd_lock);
4949 				mutex_enter(&pidlock);
4950 				PID_RELE(pidp);
4951 				mutex_exit(&pidlock);
4952 				return (EINVAL);
4953 			}
4954 		}
4955 
4956 		/*
4957 		 * Recalculate OR of sig events.
4958 		 */
4959 		stp->sd_sigflags = 0;
4960 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
4961 			stp->sd_sigflags |= ssp->ss_events;
4962 		mutex_exit(&stp->sd_lock);
4963 		mutex_enter(&pidlock);
4964 		PID_RELE(pidp);
4965 		mutex_exit(&pidlock);
4966 		return (0);
4967 	}
4968 
4969 	case I_EGETSIG:
4970 		/*
4971 		 * Return (in arg) the current registration of events
4972 		 * for which the calling proc is to be signaled.
4973 		 */
4974 	{
4975 		struct strsig *ssp;
4976 		struct proc *proc;
4977 		pid_t pid;
4978 		struct pid  *pidp;
4979 		struct strsigset ss;
4980 
4981 		error = strcopyin((void *)arg, &ss, sizeof (ss), copyflag);
4982 		if (error)
4983 			return (error);
4984 
4985 		pid = ss.ss_pid;
4986 		mutex_enter(&pidlock);
4987 		if (pid == 0)
4988 			proc = curproc;
4989 		else if (pid < 0)
4990 			proc = pgfind(-pid);
4991 		else
4992 			proc = prfind(pid);
4993 		if (proc == NULL) {
4994 			mutex_exit(&pidlock);
4995 			return (ESRCH);
4996 		}
4997 		if (pid < 0)
4998 			pidp = proc->p_pgidp;
4999 		else
5000 			pidp = proc->p_pidp;
5001 
5002 		/* Prevent the pidp from being reassigned */
5003 		PID_HOLD(pidp);
5004 		mutex_exit(&pidlock);
5005 
5006 		mutex_enter(&stp->sd_lock);
5007 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
5008 			if (ssp->ss_pid == pid) {
5009 				ss.ss_pid = ssp->ss_pid;
5010 				ss.ss_events = ssp->ss_events;
5011 				error = strcopyout(&ss, (void *)arg,
5012 				    sizeof (struct strsigset), copyflag);
5013 				mutex_exit(&stp->sd_lock);
5014 				mutex_enter(&pidlock);
5015 				PID_RELE(pidp);
5016 				mutex_exit(&pidlock);
5017 				return (error);
5018 			}
5019 		mutex_exit(&stp->sd_lock);
5020 		mutex_enter(&pidlock);
5021 		PID_RELE(pidp);
5022 		mutex_exit(&pidlock);
5023 		return (EINVAL);
5024 	}
5025 
5026 	case I_PEEK:
5027 	{
5028 		STRUCT_DECL(strpeek, strpeek);
5029 		size_t n;
5030 		mblk_t *fmp, *tmp_mp = NULL;
5031 
5032 		STRUCT_INIT(strpeek, flag);
5033 
5034 		error = strcopyin((void *)arg, STRUCT_BUF(strpeek),
5035 		    STRUCT_SIZE(strpeek), copyflag);
5036 		if (error)
5037 			return (error);
5038 
5039 		mutex_enter(QLOCK(rdq));
5040 		/*
5041 		 * Skip the invalid messages
5042 		 */
5043 		for (mp = rdq->q_first; mp != NULL; mp = mp->b_next)
5044 			if (mp->b_datap->db_type != M_SIG)
5045 				break;
5046 
5047 		/*
5048 		 * If user has requested to peek at a high priority message
5049 		 * and first message is not, return 0
5050 		 */
5051 		if (mp != NULL) {
5052 			if ((STRUCT_FGET(strpeek, flags) & RS_HIPRI) &&
5053 			    queclass(mp) == QNORM) {
5054 				*rvalp = 0;
5055 				mutex_exit(QLOCK(rdq));
5056 				return (0);
5057 			}
5058 		} else if (stp->sd_struiordq == NULL ||
5059 		    (STRUCT_FGET(strpeek, flags) & RS_HIPRI)) {
5060 			/*
5061 			 * No mblks to look at at the streamhead and
5062 			 * 1). This isn't a synch stream or
5063 			 * 2). This is a synch stream but caller wants high
5064 			 *	priority messages which is not supported by
5065 			 *	the synch stream. (it only supports QNORM)
5066 			 */
5067 			*rvalp = 0;
5068 			mutex_exit(QLOCK(rdq));
5069 			return (0);
5070 		}
5071 
5072 		fmp = mp;
5073 
5074 		if (mp && mp->b_datap->db_type == M_PASSFP) {
5075 			mutex_exit(QLOCK(rdq));
5076 			return (EBADMSG);
5077 		}
5078 
5079 		ASSERT(mp == NULL || mp->b_datap->db_type == M_PCPROTO ||
5080 		    mp->b_datap->db_type == M_PROTO ||
5081 		    mp->b_datap->db_type == M_DATA);
5082 
5083 		if (mp && mp->b_datap->db_type == M_PCPROTO) {
5084 			STRUCT_FSET(strpeek, flags, RS_HIPRI);
5085 		} else {
5086 			STRUCT_FSET(strpeek, flags, 0);
5087 		}
5088 
5089 
5090 		if (mp && ((tmp_mp = dupmsg(mp)) == NULL)) {
5091 			mutex_exit(QLOCK(rdq));
5092 			return (ENOSR);
5093 		}
5094 		mutex_exit(QLOCK(rdq));
5095 
5096 		/*
5097 		 * set mp = tmp_mp, so that I_PEEK processing can continue.
5098 		 * tmp_mp is used to free the dup'd message.
5099 		 */
5100 		mp = tmp_mp;
5101 
5102 		uio.uio_fmode = 0;
5103 		uio.uio_extflg = UIO_COPY_CACHED;
5104 		uio.uio_segflg = (copyflag == U_TO_K) ? UIO_USERSPACE :
5105 		    UIO_SYSSPACE;
5106 		uio.uio_limit = 0;
5107 		/*
5108 		 * First process PROTO blocks, if any.
5109 		 * If user doesn't want to get ctl info by setting maxlen <= 0,
5110 		 * then set len to -1/0 and skip control blocks part.
5111 		 */
5112 		if (STRUCT_FGET(strpeek, ctlbuf.maxlen) < 0)
5113 			STRUCT_FSET(strpeek, ctlbuf.len, -1);
5114 		else if (STRUCT_FGET(strpeek, ctlbuf.maxlen) == 0)
5115 			STRUCT_FSET(strpeek, ctlbuf.len, 0);
5116 		else {
5117 			int	ctl_part = 0;
5118 
5119 			iov.iov_base = STRUCT_FGETP(strpeek, ctlbuf.buf);
5120 			iov.iov_len = STRUCT_FGET(strpeek, ctlbuf.maxlen);
5121 			uio.uio_iov = &iov;
5122 			uio.uio_resid = iov.iov_len;
5123 			uio.uio_loffset = 0;
5124 			uio.uio_iovcnt = 1;
5125 			while (mp && mp->b_datap->db_type != M_DATA &&
5126 			    uio.uio_resid >= 0) {
5127 				ASSERT(STRUCT_FGET(strpeek, flags) == 0 ?
5128 				    mp->b_datap->db_type == M_PROTO :
5129 				    mp->b_datap->db_type == M_PCPROTO);
5130 
5131 				if ((n = MIN(uio.uio_resid,
5132 				    mp->b_wptr - mp->b_rptr)) != 0 &&
5133 				    (error = uiomove((char *)mp->b_rptr, n,
5134 				    UIO_READ, &uio)) != 0) {
5135 					freemsg(tmp_mp);
5136 					return (error);
5137 				}
5138 				ctl_part = 1;
5139 				mp = mp->b_cont;
5140 			}
5141 			/* No ctl message */
5142 			if (ctl_part == 0)
5143 				STRUCT_FSET(strpeek, ctlbuf.len, -1);
5144 			else
5145 				STRUCT_FSET(strpeek, ctlbuf.len,
5146 				    STRUCT_FGET(strpeek, ctlbuf.maxlen) -
5147 				    uio.uio_resid);
5148 		}
5149 
5150 		/*
5151 		 * Now process DATA blocks, if any.
5152 		 * If user doesn't want to get data info by setting maxlen <= 0,
5153 		 * then set len to -1/0 and skip data blocks part.
5154 		 */
5155 		if (STRUCT_FGET(strpeek, databuf.maxlen) < 0)
5156 			STRUCT_FSET(strpeek, databuf.len, -1);
5157 		else if (STRUCT_FGET(strpeek, databuf.maxlen) == 0)
5158 			STRUCT_FSET(strpeek, databuf.len, 0);
5159 		else {
5160 			int	data_part = 0;
5161 
5162 			iov.iov_base = STRUCT_FGETP(strpeek, databuf.buf);
5163 			iov.iov_len = STRUCT_FGET(strpeek, databuf.maxlen);
5164 			uio.uio_iov = &iov;
5165 			uio.uio_resid = iov.iov_len;
5166 			uio.uio_loffset = 0;
5167 			uio.uio_iovcnt = 1;
5168 			while (mp && uio.uio_resid) {
5169 				if (mp->b_datap->db_type == M_DATA) {
5170 					if ((n = MIN(uio.uio_resid,
5171 					    mp->b_wptr - mp->b_rptr)) != 0 &&
5172 					    (error = uiomove((char *)mp->b_rptr,
5173 					    n, UIO_READ, &uio)) != 0) {
5174 						freemsg(tmp_mp);
5175 						return (error);
5176 					}
5177 					data_part = 1;
5178 				}
5179 				ASSERT(data_part == 0 ||
5180 				    mp->b_datap->db_type == M_DATA);
5181 				mp = mp->b_cont;
5182 			}
5183 			/* No data message */
5184 			if (data_part == 0)
5185 				STRUCT_FSET(strpeek, databuf.len, -1);
5186 			else
5187 				STRUCT_FSET(strpeek, databuf.len,
5188 				    STRUCT_FGET(strpeek, databuf.maxlen) -
5189 				    uio.uio_resid);
5190 		}
5191 		freemsg(tmp_mp);
5192 
5193 		/*
5194 		 * It is a synch stream and user wants to get
5195 		 * data (maxlen > 0).
5196 		 * uio setup is done by the codes that process DATA
5197 		 * blocks above.
5198 		 */
5199 		if ((fmp == NULL) && STRUCT_FGET(strpeek, databuf.maxlen) > 0) {
5200 			infod_t infod;
5201 
5202 			infod.d_cmd = INFOD_COPYOUT;
5203 			infod.d_res = 0;
5204 			infod.d_uiop = &uio;
5205 			error = infonext(rdq, &infod);
5206 			if (error == EINVAL || error == EBUSY)
5207 				error = 0;
5208 			if (error)
5209 				return (error);
5210 			STRUCT_FSET(strpeek, databuf.len, STRUCT_FGET(strpeek,
5211 			    databuf.maxlen) - uio.uio_resid);
5212 			if (STRUCT_FGET(strpeek, databuf.len) == 0) {
5213 				/*
5214 				 * No data found by the infonext().
5215 				 */
5216 				STRUCT_FSET(strpeek, databuf.len, -1);
5217 			}
5218 		}
5219 		error = strcopyout(STRUCT_BUF(strpeek), (void *)arg,
5220 		    STRUCT_SIZE(strpeek), copyflag);
5221 		if (error) {
5222 			return (error);
5223 		}
5224 		/*
5225 		 * If there is no message retrieved, set return code to 0
5226 		 * otherwise, set it to 1.
5227 		 */
5228 		if (STRUCT_FGET(strpeek, ctlbuf.len) == -1 &&
5229 		    STRUCT_FGET(strpeek, databuf.len) == -1)
5230 			*rvalp = 0;
5231 		else
5232 			*rvalp = 1;
5233 		return (0);
5234 	}
5235 
5236 	case I_FDINSERT:
5237 	{
5238 		STRUCT_DECL(strfdinsert, strfdinsert);
5239 		struct file *resftp;
5240 		struct stdata *resstp;
5241 		t_uscalar_t	ival;
5242 		ssize_t msgsize;
5243 		struct strbuf mctl;
5244 
5245 		STRUCT_INIT(strfdinsert, flag);
5246 		if (stp->sd_flag & STRHUP)
5247 			return (ENXIO);
5248 		/*
5249 		 * STRDERR, STWRERR and STPLEX tested above.
5250 		 */
5251 		error = strcopyin((void *)arg, STRUCT_BUF(strfdinsert),
5252 		    STRUCT_SIZE(strfdinsert), copyflag);
5253 		if (error)
5254 			return (error);
5255 
5256 		if (STRUCT_FGET(strfdinsert, offset) < 0 ||
5257 		    (STRUCT_FGET(strfdinsert, offset) %
5258 		    sizeof (t_uscalar_t)) != 0)
5259 			return (EINVAL);
5260 		if ((resftp = getf(STRUCT_FGET(strfdinsert, fildes))) != NULL) {
5261 			if ((resstp = resftp->f_vnode->v_stream) == NULL) {
5262 				releasef(STRUCT_FGET(strfdinsert, fildes));
5263 				return (EINVAL);
5264 			}
5265 		} else
5266 			return (EINVAL);
5267 
5268 		mutex_enter(&resstp->sd_lock);
5269 		if (resstp->sd_flag & (STRDERR|STWRERR|STRHUP|STPLEX)) {
5270 			error = strgeterr(resstp,
5271 			    STRDERR|STWRERR|STRHUP|STPLEX, 0);
5272 			if (error != 0) {
5273 				mutex_exit(&resstp->sd_lock);
5274 				releasef(STRUCT_FGET(strfdinsert, fildes));
5275 				return (error);
5276 			}
5277 		}
5278 		mutex_exit(&resstp->sd_lock);
5279 
5280 #ifdef	_ILP32
5281 		{
5282 			queue_t	*q;
5283 			queue_t	*mate = NULL;
5284 
5285 			/* get read queue of stream terminus */
5286 			claimstr(resstp->sd_wrq);
5287 			for (q = resstp->sd_wrq->q_next; q->q_next != NULL;
5288 			    q = q->q_next)
5289 				if (!STRMATED(resstp) && STREAM(q) != resstp &&
5290 				    mate == NULL) {
5291 					ASSERT(q->q_qinfo->qi_srvp);
5292 					ASSERT(_OTHERQ(q)->q_qinfo->qi_srvp);
5293 					claimstr(q);
5294 					mate = q;
5295 				}
5296 			q = _RD(q);
5297 			if (mate)
5298 				releasestr(mate);
5299 			releasestr(resstp->sd_wrq);
5300 			ival = (t_uscalar_t)q;
5301 		}
5302 #else
5303 		ival = (t_uscalar_t)getminor(resftp->f_vnode->v_rdev);
5304 #endif	/* _ILP32 */
5305 
5306 		if (STRUCT_FGET(strfdinsert, ctlbuf.len) <
5307 		    STRUCT_FGET(strfdinsert, offset) + sizeof (t_uscalar_t)) {
5308 			releasef(STRUCT_FGET(strfdinsert, fildes));
5309 			return (EINVAL);
5310 		}
5311 
5312 		/*
5313 		 * Check for legal flag value.
5314 		 */
5315 		if (STRUCT_FGET(strfdinsert, flags) & ~RS_HIPRI) {
5316 			releasef(STRUCT_FGET(strfdinsert, fildes));
5317 			return (EINVAL);
5318 		}
5319 
5320 		/* get these values from those cached in the stream head */
5321 		mutex_enter(QLOCK(stp->sd_wrq));
5322 		rmin = stp->sd_qn_minpsz;
5323 		rmax = stp->sd_qn_maxpsz;
5324 		mutex_exit(QLOCK(stp->sd_wrq));
5325 
5326 		/*
5327 		 * Make sure ctl and data sizes together fall within
5328 		 * the limits of the max and min receive packet sizes
5329 		 * and do not exceed system limit.  A negative data
5330 		 * length means that no data part is to be sent.
5331 		 */
5332 		ASSERT((rmax >= 0) || (rmax == INFPSZ));
5333 		if (rmax == 0) {
5334 			releasef(STRUCT_FGET(strfdinsert, fildes));
5335 			return (ERANGE);
5336 		}
5337 		if ((msgsize = STRUCT_FGET(strfdinsert, databuf.len)) < 0)
5338 			msgsize = 0;
5339 		if ((msgsize < rmin) ||
5340 		    ((msgsize > rmax) && (rmax != INFPSZ)) ||
5341 		    (STRUCT_FGET(strfdinsert, ctlbuf.len) > strctlsz)) {
5342 			releasef(STRUCT_FGET(strfdinsert, fildes));
5343 			return (ERANGE);
5344 		}
5345 
5346 		mutex_enter(&stp->sd_lock);
5347 		while (!(STRUCT_FGET(strfdinsert, flags) & RS_HIPRI) &&
5348 		    !canputnext(stp->sd_wrq)) {
5349 			if ((error = strwaitq(stp, WRITEWAIT, (ssize_t)0,
5350 			    flag, -1, &done)) != 0 || done) {
5351 				mutex_exit(&stp->sd_lock);
5352 				releasef(STRUCT_FGET(strfdinsert, fildes));
5353 				return (error);
5354 			}
5355 			if ((error = i_straccess(stp, access)) != 0) {
5356 				mutex_exit(&stp->sd_lock);
5357 				releasef(
5358 				    STRUCT_FGET(strfdinsert, fildes));
5359 				return (error);
5360 			}
5361 		}
5362 		mutex_exit(&stp->sd_lock);
5363 
5364 		/*
5365 		 * Copy strfdinsert.ctlbuf into native form of
5366 		 * ctlbuf to pass down into strmakemsg().
5367 		 */
5368 		mctl.maxlen = STRUCT_FGET(strfdinsert, ctlbuf.maxlen);
5369 		mctl.len = STRUCT_FGET(strfdinsert, ctlbuf.len);
5370 		mctl.buf = STRUCT_FGETP(strfdinsert, ctlbuf.buf);
5371 
5372 		iov.iov_base = STRUCT_FGETP(strfdinsert, databuf.buf);
5373 		iov.iov_len = STRUCT_FGET(strfdinsert, databuf.len);
5374 		uio.uio_iov = &iov;
5375 		uio.uio_iovcnt = 1;
5376 		uio.uio_loffset = 0;
5377 		uio.uio_segflg = (copyflag == U_TO_K) ? UIO_USERSPACE :
5378 		    UIO_SYSSPACE;
5379 		uio.uio_fmode = 0;
5380 		uio.uio_extflg = UIO_COPY_CACHED;
5381 		uio.uio_resid = iov.iov_len;
5382 		if ((error = strmakemsg(&mctl,
5383 		    &msgsize, &uio, stp,
5384 		    STRUCT_FGET(strfdinsert, flags), &mp)) != 0 || !mp) {
5385 			STRUCT_FSET(strfdinsert, databuf.len, msgsize);
5386 			releasef(STRUCT_FGET(strfdinsert, fildes));
5387 			return (error);
5388 		}
5389 
5390 		STRUCT_FSET(strfdinsert, databuf.len, msgsize);
5391 
5392 		/*
5393 		 * Place the possibly reencoded queue pointer 'offset' bytes
5394 		 * from the start of the control portion of the message.
5395 		 */
5396 		*((t_uscalar_t *)(mp->b_rptr +
5397 		    STRUCT_FGET(strfdinsert, offset))) = ival;
5398 
5399 		/*
5400 		 * Put message downstream.
5401 		 */
5402 		stream_willservice(stp);
5403 		putnext(stp->sd_wrq, mp);
5404 		stream_runservice(stp);
5405 		releasef(STRUCT_FGET(strfdinsert, fildes));
5406 		return (error);
5407 	}
5408 
5409 	case I_SENDFD:
5410 	{
5411 		struct file *fp;
5412 
5413 		if ((fp = getf((int)arg)) == NULL)
5414 			return (EBADF);
5415 		error = do_sendfp(stp, fp, crp);
5416 		if (auditing) {
5417 			audit_fdsend((int)arg, fp, error);
5418 		}
5419 		releasef((int)arg);
5420 		return (error);
5421 	}
5422 
5423 	case I_RECVFD:
5424 	case I_E_RECVFD:
5425 	{
5426 		struct k_strrecvfd *srf;
5427 		int i, fd;
5428 
5429 		mutex_enter(&stp->sd_lock);
5430 		while (!(mp = getq(rdq))) {
5431 			if (stp->sd_flag & (STRHUP|STREOF)) {
5432 				mutex_exit(&stp->sd_lock);
5433 				return (ENXIO);
5434 			}
5435 			if ((error = strwaitq(stp, GETWAIT, (ssize_t)0,
5436 			    flag, -1, &done)) != 0 || done) {
5437 				mutex_exit(&stp->sd_lock);
5438 				return (error);
5439 			}
5440 			if ((error = i_straccess(stp, access)) != 0) {
5441 				mutex_exit(&stp->sd_lock);
5442 				return (error);
5443 			}
5444 		}
5445 		if (mp->b_datap->db_type != M_PASSFP) {
5446 			putback(stp, rdq, mp, mp->b_band);
5447 			mutex_exit(&stp->sd_lock);
5448 			return (EBADMSG);
5449 		}
5450 		mutex_exit(&stp->sd_lock);
5451 
5452 		srf = (struct k_strrecvfd *)mp->b_rptr;
5453 		if ((fd = ufalloc(0)) == -1) {
5454 			mutex_enter(&stp->sd_lock);
5455 			putback(stp, rdq, mp, mp->b_band);
5456 			mutex_exit(&stp->sd_lock);
5457 			return (EMFILE);
5458 		}
5459 		if (cmd == I_RECVFD) {
5460 			struct o_strrecvfd	ostrfd;
5461 
5462 			/* check to see if uid/gid values are too large. */
5463 
5464 			if (srf->uid > (o_uid_t)USHRT_MAX ||
5465 			    srf->gid > (o_gid_t)USHRT_MAX) {
5466 				mutex_enter(&stp->sd_lock);
5467 				putback(stp, rdq, mp, mp->b_band);
5468 				mutex_exit(&stp->sd_lock);
5469 				setf(fd, NULL);	/* release fd entry */
5470 				return (EOVERFLOW);
5471 			}
5472 
5473 			ostrfd.fd = fd;
5474 			ostrfd.uid = (o_uid_t)srf->uid;
5475 			ostrfd.gid = (o_gid_t)srf->gid;
5476 
5477 			/* Null the filler bits */
5478 			for (i = 0; i < 8; i++)
5479 				ostrfd.fill[i] = 0;
5480 
5481 			error = strcopyout(&ostrfd, (void *)arg,
5482 			    sizeof (struct o_strrecvfd), copyflag);
5483 		} else {		/* I_E_RECVFD */
5484 			struct strrecvfd	strfd;
5485 
5486 			strfd.fd = fd;
5487 			strfd.uid = srf->uid;
5488 			strfd.gid = srf->gid;
5489 
5490 			/* null the filler bits */
5491 			for (i = 0; i < 8; i++)
5492 				strfd.fill[i] = 0;
5493 
5494 			error = strcopyout(&strfd, (void *)arg,
5495 			    sizeof (struct strrecvfd), copyflag);
5496 		}
5497 
5498 		if (error) {
5499 			setf(fd, NULL);	/* release fd entry */
5500 			mutex_enter(&stp->sd_lock);
5501 			putback(stp, rdq, mp, mp->b_band);
5502 			mutex_exit(&stp->sd_lock);
5503 			return (error);
5504 		}
5505 		if (auditing) {
5506 			audit_fdrecv(fd, srf->fp);
5507 		}
5508 
5509 		/*
5510 		 * Always increment f_count since the freemsg() below will
5511 		 * always call free_passfp() which performs a closef().
5512 		 */
5513 		mutex_enter(&srf->fp->f_tlock);
5514 		srf->fp->f_count++;
5515 		mutex_exit(&srf->fp->f_tlock);
5516 		setf(fd, srf->fp);
5517 		freemsg(mp);
5518 		return (0);
5519 	}
5520 
5521 	case I_SWROPT:
5522 		/*
5523 		 * Set/clear the write options. arg is a bit
5524 		 * mask with any of the following bits set...
5525 		 *	SNDZERO - send zero length message
5526 		 *	SNDPIPE - send sigpipe to process if
5527 		 *		sd_werror is set and process is
5528 		 *		doing a write or putmsg.
5529 		 * The new stream head write options should reflect
5530 		 * what is in arg.
5531 		 */
5532 		if (arg & ~(SNDZERO|SNDPIPE))
5533 			return (EINVAL);
5534 
5535 		mutex_enter(&stp->sd_lock);
5536 		stp->sd_wput_opt &= ~(SW_SIGPIPE|SW_SNDZERO);
5537 		if (arg & SNDZERO)
5538 			stp->sd_wput_opt |= SW_SNDZERO;
5539 		if (arg & SNDPIPE)
5540 			stp->sd_wput_opt |= SW_SIGPIPE;
5541 		mutex_exit(&stp->sd_lock);
5542 		return (0);
5543 
5544 	case I_GWROPT:
5545 	{
5546 		int wropt = 0;
5547 
5548 		if (stp->sd_wput_opt & SW_SNDZERO)
5549 			wropt |= SNDZERO;
5550 		if (stp->sd_wput_opt & SW_SIGPIPE)
5551 			wropt |= SNDPIPE;
5552 		return (strcopyout(&wropt, (void *)arg, sizeof (wropt),
5553 		    copyflag));
5554 	}
5555 
5556 	case I_LIST:
5557 		/*
5558 		 * Returns all the modules found on this stream,
5559 		 * upto the driver. If argument is NULL, return the
5560 		 * number of modules (including driver). If argument
5561 		 * is not NULL, copy the names into the structure
5562 		 * provided.
5563 		 */
5564 
5565 	{
5566 		queue_t *q;
5567 		char *qname;
5568 		int i, nmods;
5569 		struct str_mlist *mlist;
5570 		STRUCT_DECL(str_list, strlist);
5571 
5572 		if (arg == 0) { /* Return number of modules plus driver */
5573 			if (stp->sd_vnode->v_type == VFIFO)
5574 				*rvalp = stp->sd_pushcnt;
5575 			else
5576 				*rvalp = stp->sd_pushcnt + 1;
5577 			return (0);
5578 		}
5579 
5580 		STRUCT_INIT(strlist, flag);
5581 
5582 		error = strcopyin((void *)arg, STRUCT_BUF(strlist),
5583 		    STRUCT_SIZE(strlist), copyflag);
5584 		if (error != 0)
5585 			return (error);
5586 
5587 		mlist = STRUCT_FGETP(strlist, sl_modlist);
5588 		nmods = STRUCT_FGET(strlist, sl_nmods);
5589 		if (nmods <= 0)
5590 			return (EINVAL);
5591 
5592 		claimstr(stp->sd_wrq);
5593 		q = stp->sd_wrq;
5594 		for (i = 0; i < nmods && _SAMESTR(q); i++, q = q->q_next) {
5595 			qname = Q2NAME(q->q_next);
5596 			error = strcopyout(qname, &mlist[i], strlen(qname) + 1,
5597 			    copyflag);
5598 			if (error != 0) {
5599 				releasestr(stp->sd_wrq);
5600 				return (error);
5601 			}
5602 		}
5603 		releasestr(stp->sd_wrq);
5604 		return (strcopyout(&i, (void *)arg, sizeof (int), copyflag));
5605 	}
5606 
5607 	case I_CKBAND:
5608 	{
5609 		queue_t *q;
5610 		qband_t *qbp;
5611 
5612 		if ((arg < 0) || (arg >= NBAND))
5613 			return (EINVAL);
5614 		q = _RD(stp->sd_wrq);
5615 		mutex_enter(QLOCK(q));
5616 		if (arg > (int)q->q_nband) {
5617 			*rvalp = 0;
5618 		} else {
5619 			if (arg == 0) {
5620 				if (q->q_first)
5621 					*rvalp = 1;
5622 				else
5623 					*rvalp = 0;
5624 			} else {
5625 				qbp = q->q_bandp;
5626 				while (--arg > 0)
5627 					qbp = qbp->qb_next;
5628 				if (qbp->qb_first)
5629 					*rvalp = 1;
5630 				else
5631 					*rvalp = 0;
5632 			}
5633 		}
5634 		mutex_exit(QLOCK(q));
5635 		return (0);
5636 	}
5637 
5638 	case I_GETBAND:
5639 	{
5640 		int intpri;
5641 		queue_t *q;
5642 
5643 		q = _RD(stp->sd_wrq);
5644 		mutex_enter(QLOCK(q));
5645 		mp = q->q_first;
5646 		if (!mp) {
5647 			mutex_exit(QLOCK(q));
5648 			return (ENODATA);
5649 		}
5650 		intpri = (int)mp->b_band;
5651 		error = strcopyout(&intpri, (void *)arg, sizeof (int),
5652 		    copyflag);
5653 		mutex_exit(QLOCK(q));
5654 		return (error);
5655 	}
5656 
5657 	case I_ATMARK:
5658 	{
5659 		queue_t *q;
5660 
5661 		if (arg & ~(ANYMARK|LASTMARK))
5662 			return (EINVAL);
5663 		q = _RD(stp->sd_wrq);
5664 		mutex_enter(&stp->sd_lock);
5665 		if ((stp->sd_flag & STRATMARK) && (arg == ANYMARK)) {
5666 			*rvalp = 1;
5667 		} else {
5668 			mutex_enter(QLOCK(q));
5669 			mp = q->q_first;
5670 
5671 			if (mp == NULL)
5672 				*rvalp = 0;
5673 			else if ((arg == ANYMARK) && (mp->b_flag & MSGMARK))
5674 				*rvalp = 1;
5675 			else if ((arg == LASTMARK) && (mp == stp->sd_mark))
5676 				*rvalp = 1;
5677 			else
5678 				*rvalp = 0;
5679 			mutex_exit(QLOCK(q));
5680 		}
5681 		mutex_exit(&stp->sd_lock);
5682 		return (0);
5683 	}
5684 
5685 	case I_CANPUT:
5686 	{
5687 		char band;
5688 
5689 		if ((arg < 0) || (arg >= NBAND))
5690 			return (EINVAL);
5691 		band = (char)arg;
5692 		*rvalp = bcanputnext(stp->sd_wrq, band);
5693 		return (0);
5694 	}
5695 
5696 	case I_SETCLTIME:
5697 	{
5698 		int closetime;
5699 
5700 		error = strcopyin((void *)arg, &closetime, sizeof (int),
5701 		    copyflag);
5702 		if (error)
5703 			return (error);
5704 		if (closetime < 0)
5705 			return (EINVAL);
5706 
5707 		stp->sd_closetime = closetime;
5708 		return (0);
5709 	}
5710 
5711 	case I_GETCLTIME:
5712 	{
5713 		int closetime;
5714 
5715 		closetime = stp->sd_closetime;
5716 		return (strcopyout(&closetime, (void *)arg, sizeof (int),
5717 		    copyflag));
5718 	}
5719 
5720 	case TIOCGSID:
5721 	{
5722 		pid_t sid;
5723 
5724 		mutex_enter(&stp->sd_lock);
5725 		if (stp->sd_sidp == NULL) {
5726 			mutex_exit(&stp->sd_lock);
5727 			return (ENOTTY);
5728 		}
5729 		sid = stp->sd_sidp->pid_id;
5730 		mutex_exit(&stp->sd_lock);
5731 		return (strcopyout(&sid, (void *)arg, sizeof (pid_t),
5732 		    copyflag));
5733 	}
5734 
5735 	case TIOCSPGRP:
5736 	{
5737 		pid_t pgrp;
5738 		proc_t *q;
5739 		pid_t	sid, fg_pgid, bg_pgid;
5740 
5741 		if (error = strcopyin((void *)arg, &pgrp, sizeof (pid_t),
5742 		    copyflag))
5743 			return (error);
5744 		mutex_enter(&stp->sd_lock);
5745 		mutex_enter(&pidlock);
5746 		if (stp->sd_sidp != ttoproc(curthread)->p_sessp->s_sidp) {
5747 			mutex_exit(&pidlock);
5748 			mutex_exit(&stp->sd_lock);
5749 			return (ENOTTY);
5750 		}
5751 		if (pgrp == stp->sd_pgidp->pid_id) {
5752 			mutex_exit(&pidlock);
5753 			mutex_exit(&stp->sd_lock);
5754 			return (0);
5755 		}
5756 		if (pgrp <= 0 || pgrp >= maxpid) {
5757 			mutex_exit(&pidlock);
5758 			mutex_exit(&stp->sd_lock);
5759 			return (EINVAL);
5760 		}
5761 		if ((q = pgfind(pgrp)) == NULL ||
5762 		    q->p_sessp != ttoproc(curthread)->p_sessp) {
5763 			mutex_exit(&pidlock);
5764 			mutex_exit(&stp->sd_lock);
5765 			return (EPERM);
5766 		}
5767 		sid = stp->sd_sidp->pid_id;
5768 		fg_pgid = q->p_pgrp;
5769 		bg_pgid = stp->sd_pgidp->pid_id;
5770 		CL_SET_PROCESS_GROUP(curthread, sid, bg_pgid, fg_pgid);
5771 		PID_RELE(stp->sd_pgidp);
5772 		ctty_clear_sighuped();
5773 		stp->sd_pgidp = q->p_pgidp;
5774 		PID_HOLD(stp->sd_pgidp);
5775 		mutex_exit(&pidlock);
5776 		mutex_exit(&stp->sd_lock);
5777 		return (0);
5778 	}
5779 
5780 	case TIOCGPGRP:
5781 	{
5782 		pid_t pgrp;
5783 
5784 		mutex_enter(&stp->sd_lock);
5785 		if (stp->sd_sidp == NULL) {
5786 			mutex_exit(&stp->sd_lock);
5787 			return (ENOTTY);
5788 		}
5789 		pgrp = stp->sd_pgidp->pid_id;
5790 		mutex_exit(&stp->sd_lock);
5791 		return (strcopyout(&pgrp, (void *)arg, sizeof (pid_t),
5792 		    copyflag));
5793 	}
5794 
5795 	case TIOCSCTTY:
5796 	{
5797 		return (strctty(stp));
5798 	}
5799 
5800 	case TIOCNOTTY:
5801 	{
5802 		/* freectty() always assumes curproc. */
5803 		if (freectty(B_FALSE) != 0)
5804 			return (0);
5805 		return (ENOTTY);
5806 	}
5807 
5808 	case FIONBIO:
5809 	case FIOASYNC:
5810 		return (0);	/* handled by the upper layer */
5811 	}
5812 }
5813 
5814 /*
5815  * Custom free routine used for M_PASSFP messages.
5816  */
5817 static void
free_passfp(struct k_strrecvfd * srf)5818 free_passfp(struct k_strrecvfd *srf)
5819 {
5820 	(void) closef(srf->fp);
5821 	kmem_free(srf, sizeof (struct k_strrecvfd) + sizeof (frtn_t));
5822 }
5823 
5824 /* ARGSUSED */
5825 int
do_sendfp(struct stdata * stp,struct file * fp,struct cred * cr)5826 do_sendfp(struct stdata *stp, struct file *fp, struct cred *cr)
5827 {
5828 	queue_t *qp, *nextqp;
5829 	struct k_strrecvfd *srf;
5830 	mblk_t *mp;
5831 	frtn_t *frtnp;
5832 	size_t bufsize;
5833 	queue_t	*mate = NULL;
5834 	syncq_t	*sq = NULL;
5835 	int retval = 0;
5836 
5837 	if (stp->sd_flag & STRHUP)
5838 		return (ENXIO);
5839 
5840 	claimstr(stp->sd_wrq);
5841 
5842 	/* Fastpath, we have a pipe, and we are already mated, use it. */
5843 	if (STRMATED(stp)) {
5844 		qp = _RD(stp->sd_mate->sd_wrq);
5845 		claimstr(qp);
5846 		mate = qp;
5847 	} else { /* Not already mated. */
5848 
5849 		/*
5850 		 * Walk the stream to the end of this one.
5851 		 * assumes that the claimstr() will prevent
5852 		 * plumbing between the stream head and the
5853 		 * driver from changing
5854 		 */
5855 		qp = stp->sd_wrq;
5856 
5857 		/*
5858 		 * Loop until we reach the end of this stream.
5859 		 * On completion, qp points to the write queue
5860 		 * at the end of the stream, or the read queue
5861 		 * at the stream head if this is a fifo.
5862 		 */
5863 		while (((qp = qp->q_next) != NULL) && _SAMESTR(qp))
5864 			;
5865 
5866 		/*
5867 		 * Just in case we get a q_next which is NULL, but
5868 		 * not at the end of the stream.  This is actually
5869 		 * broken, so we set an assert to catch it in
5870 		 * debug, and set an error and return if not debug.
5871 		 */
5872 		ASSERT(qp);
5873 		if (qp == NULL) {
5874 			releasestr(stp->sd_wrq);
5875 			return (EINVAL);
5876 		}
5877 
5878 		/*
5879 		 * Enter the syncq for the driver, so (hopefully)
5880 		 * the queue values will not change on us.
5881 		 * XXXX - This will only prevent the race IFF only
5882 		 *   the write side modifies the q_next member, and
5883 		 *   the put procedure is protected by at least
5884 		 *   MT_PERQ.
5885 		 */
5886 		if ((sq = qp->q_syncq) != NULL)
5887 			entersq(sq, SQ_PUT);
5888 
5889 		/* Now get the q_next value from this qp. */
5890 		nextqp = qp->q_next;
5891 
5892 		/*
5893 		 * If nextqp exists and the other stream is different
5894 		 * from this one claim the stream, set the mate, and
5895 		 * get the read queue at the stream head of the other
5896 		 * stream.  Assumes that nextqp was at least valid when
5897 		 * we got it.  Hopefully the entersq of the driver
5898 		 * will prevent it from changing on us.
5899 		 */
5900 		if ((nextqp != NULL) && (STREAM(nextqp) != stp)) {
5901 			ASSERT(qp->q_qinfo->qi_srvp);
5902 			ASSERT(_OTHERQ(qp)->q_qinfo->qi_srvp);
5903 			ASSERT(_OTHERQ(qp->q_next)->q_qinfo->qi_srvp);
5904 			claimstr(nextqp);
5905 
5906 			/* Make sure we still have a q_next */
5907 			if (nextqp != qp->q_next) {
5908 				releasestr(stp->sd_wrq);
5909 				releasestr(nextqp);
5910 				return (EINVAL);
5911 			}
5912 
5913 			qp = _RD(STREAM(nextqp)->sd_wrq);
5914 			mate = qp;
5915 		}
5916 		/* If we entered the synq above, leave it. */
5917 		if (sq != NULL)
5918 			leavesq(sq, SQ_PUT);
5919 	} /*  STRMATED(STP)  */
5920 
5921 	/* XXX prevents substitution of the ops vector */
5922 	if (qp->q_qinfo != &strdata && qp->q_qinfo != &fifo_strdata) {
5923 		retval = EINVAL;
5924 		goto out;
5925 	}
5926 
5927 	if (qp->q_flag & QFULL) {
5928 		retval = EAGAIN;
5929 		goto out;
5930 	}
5931 
5932 	/*
5933 	 * Since M_PASSFP messages include a file descriptor, we use
5934 	 * esballoc() and specify a custom free routine (free_passfp()) that
5935 	 * will close the descriptor as part of freeing the message.  For
5936 	 * convenience, we stash the frtn_t right after the data block.
5937 	 */
5938 	bufsize = sizeof (struct k_strrecvfd) + sizeof (frtn_t);
5939 	srf = kmem_alloc(bufsize, KM_NOSLEEP);
5940 	if (srf == NULL) {
5941 		retval = EAGAIN;
5942 		goto out;
5943 	}
5944 
5945 	frtnp = (frtn_t *)(srf + 1);
5946 	frtnp->free_arg = (caddr_t)srf;
5947 	frtnp->free_func = free_passfp;
5948 
5949 	mp = esballoc((uchar_t *)srf, bufsize, BPRI_MED, frtnp);
5950 	if (mp == NULL) {
5951 		kmem_free(srf, bufsize);
5952 		retval = EAGAIN;
5953 		goto out;
5954 	}
5955 	mp->b_wptr += sizeof (struct k_strrecvfd);
5956 	mp->b_datap->db_type = M_PASSFP;
5957 
5958 	srf->fp = fp;
5959 	srf->uid = crgetuid(curthread->t_cred);
5960 	srf->gid = crgetgid(curthread->t_cred);
5961 	mutex_enter(&fp->f_tlock);
5962 	fp->f_count++;
5963 	mutex_exit(&fp->f_tlock);
5964 
5965 	put(qp, mp);
5966 out:
5967 	releasestr(stp->sd_wrq);
5968 	if (mate)
5969 		releasestr(mate);
5970 	return (retval);
5971 }
5972 
5973 /*
5974  * Send an ioctl message downstream and wait for acknowledgement.
5975  * flags may be set to either U_TO_K or K_TO_K and a combination
5976  * of STR_NOERROR or STR_NOSIG
5977  * STR_NOSIG: Signals are essentially ignored or held and have
5978  *	no effect for the duration of the call.
5979  * STR_NOERROR: Ignores stream head read, write and hup errors.
5980  *	Additionally, if an existing ioctl times out, it is assumed
5981  *	lost and and this ioctl will continue as if the previous ioctl had
5982  *	finished.  ETIME may be returned if this ioctl times out (i.e.
5983  *	ic_timout is not INFTIM).  Non-stream head errors may be returned if
5984  *	the ioc_error indicates that the driver/module had problems,
5985  *	an EFAULT was found when accessing user data, a lack of
5986  *	resources, etc.
5987  */
5988 int
strdoioctl(struct stdata * stp,struct strioctl * strioc,int fflags,int flag,cred_t * crp,int * rvalp)5989 strdoioctl(
5990 	struct stdata *stp,
5991 	struct strioctl *strioc,
5992 	int fflags,		/* file flags with model info */
5993 	int flag,
5994 	cred_t *crp,
5995 	int *rvalp)
5996 {
5997 	mblk_t *bp;
5998 	struct iocblk *iocbp;
5999 	struct copyreq *reqp;
6000 	struct copyresp *resp;
6001 	int id;
6002 	int transparent = 0;
6003 	int error = 0;
6004 	int len = 0;
6005 	caddr_t taddr;
6006 	int copyflag = (flag & (U_TO_K | K_TO_K));
6007 	int sigflag = (flag & STR_NOSIG);
6008 	int errs;
6009 	uint_t waitflags;
6010 	boolean_t set_iocwaitne = B_FALSE;
6011 
6012 	ASSERT(copyflag == U_TO_K || copyflag == K_TO_K);
6013 	ASSERT((fflags & FMODELS) != 0);
6014 
6015 	TRACE_2(TR_FAC_STREAMS_FR,
6016 	    TR_STRDOIOCTL,
6017 	    "strdoioctl:stp %p strioc %p", stp, strioc);
6018 	if (strioc->ic_len == TRANSPARENT) {	/* send arg in M_DATA block */
6019 		transparent = 1;
6020 		strioc->ic_len = sizeof (intptr_t);
6021 	}
6022 
6023 	if (strioc->ic_len < 0 || (strmsgsz > 0 && strioc->ic_len > strmsgsz))
6024 		return (EINVAL);
6025 
6026 	if ((bp = allocb_cred_wait(sizeof (union ioctypes), sigflag, &error,
6027 	    crp, curproc->p_pid)) == NULL)
6028 			return (error);
6029 
6030 	bzero(bp->b_wptr, sizeof (union ioctypes));
6031 
6032 	iocbp = (struct iocblk *)bp->b_wptr;
6033 	iocbp->ioc_count = strioc->ic_len;
6034 	iocbp->ioc_cmd = strioc->ic_cmd;
6035 	iocbp->ioc_flag = (fflags & FMODELS);
6036 
6037 	crhold(crp);
6038 	iocbp->ioc_cr = crp;
6039 	DB_TYPE(bp) = M_IOCTL;
6040 	bp->b_wptr += sizeof (struct iocblk);
6041 
6042 	if (flag & STR_NOERROR)
6043 		errs = STPLEX;
6044 	else
6045 		errs = STRHUP|STRDERR|STWRERR|STPLEX;
6046 
6047 	/*
6048 	 * If there is data to copy into ioctl block, do so.
6049 	 */
6050 	if (iocbp->ioc_count > 0) {
6051 		if (transparent)
6052 			/*
6053 			 * Note: STR_NOERROR does not have an effect
6054 			 * in putiocd()
6055 			 */
6056 			id = K_TO_K | sigflag;
6057 		else
6058 			id = flag;
6059 		if ((error = putiocd(bp, strioc->ic_dp, id, crp)) != 0) {
6060 			freemsg(bp);
6061 			crfree(crp);
6062 			return (error);
6063 		}
6064 
6065 		/*
6066 		 * We could have slept copying in user pages.
6067 		 * Recheck the stream head state (the other end
6068 		 * of a pipe could have gone away).
6069 		 */
6070 		if (stp->sd_flag & errs) {
6071 			mutex_enter(&stp->sd_lock);
6072 			error = strgeterr(stp, errs, 0);
6073 			mutex_exit(&stp->sd_lock);
6074 			if (error != 0) {
6075 				freemsg(bp);
6076 				crfree(crp);
6077 				return (error);
6078 			}
6079 		}
6080 	}
6081 	if (transparent)
6082 		iocbp->ioc_count = TRANSPARENT;
6083 
6084 	/*
6085 	 * Block for up to STRTIMOUT milliseconds if there is an outstanding
6086 	 * ioctl for this stream already running.  All processes
6087 	 * sleeping here will be awakened as a result of an ACK
6088 	 * or NAK being received for the outstanding ioctl, or
6089 	 * as a result of the timer expiring on the outstanding
6090 	 * ioctl (a failure), or as a result of any waiting
6091 	 * process's timer expiring (also a failure).
6092 	 */
6093 
6094 	error = 0;
6095 	mutex_enter(&stp->sd_lock);
6096 	while ((stp->sd_flag & IOCWAIT) ||
6097 	    (!set_iocwaitne && (stp->sd_flag & IOCWAITNE))) {
6098 		clock_t cv_rval;
6099 
6100 		TRACE_0(TR_FAC_STREAMS_FR,
6101 		    TR_STRDOIOCTL_WAIT,
6102 		    "strdoioctl sleeps - IOCWAIT");
6103 		cv_rval = str_cv_wait(&stp->sd_iocmonitor, &stp->sd_lock,
6104 		    STRTIMOUT, sigflag);
6105 		if (cv_rval <= 0) {
6106 			if (cv_rval == 0) {
6107 				error = EINTR;
6108 			} else {
6109 				if (flag & STR_NOERROR) {
6110 					/*
6111 					 * Terminating current ioctl in
6112 					 * progress -- assume it got lost and
6113 					 * wake up the other thread so that the
6114 					 * operation completes.
6115 					 */
6116 					if (!(stp->sd_flag & IOCWAITNE)) {
6117 						set_iocwaitne = B_TRUE;
6118 						stp->sd_flag |= IOCWAITNE;
6119 						cv_broadcast(&stp->sd_monitor);
6120 					}
6121 					/*
6122 					 * Otherwise, there's a running
6123 					 * STR_NOERROR -- we have no choice
6124 					 * here but to wait forever (or until
6125 					 * interrupted).
6126 					 */
6127 				} else {
6128 					/*
6129 					 * pending ioctl has caused
6130 					 * us to time out
6131 					 */
6132 					error = ETIME;
6133 				}
6134 			}
6135 		} else if ((stp->sd_flag & errs)) {
6136 			error = strgeterr(stp, errs, 0);
6137 		}
6138 		if (error) {
6139 			mutex_exit(&stp->sd_lock);
6140 			freemsg(bp);
6141 			crfree(crp);
6142 			return (error);
6143 		}
6144 	}
6145 
6146 	/*
6147 	 * Have control of ioctl mechanism.
6148 	 * Send down ioctl packet and wait for response.
6149 	 */
6150 	if (stp->sd_iocblk != (mblk_t *)-1) {
6151 		freemsg(stp->sd_iocblk);
6152 	}
6153 	stp->sd_iocblk = NULL;
6154 
6155 	/*
6156 	 * If this is marked with 'noerror' (internal; mostly
6157 	 * I_{P,}{UN,}LINK), then make sure nobody else is able to get
6158 	 * in here by setting IOCWAITNE.
6159 	 */
6160 	waitflags = IOCWAIT;
6161 	if (flag & STR_NOERROR)
6162 		waitflags |= IOCWAITNE;
6163 
6164 	stp->sd_flag |= waitflags;
6165 
6166 	/*
6167 	 * Assign sequence number.
6168 	 */
6169 	iocbp->ioc_id = stp->sd_iocid = getiocseqno();
6170 
6171 	mutex_exit(&stp->sd_lock);
6172 
6173 	TRACE_1(TR_FAC_STREAMS_FR,
6174 	    TR_STRDOIOCTL_PUT, "strdoioctl put: stp %p", stp);
6175 	stream_willservice(stp);
6176 	putnext(stp->sd_wrq, bp);
6177 	stream_runservice(stp);
6178 
6179 	/*
6180 	 * Timed wait for acknowledgment.  The wait time is limited by the
6181 	 * timeout value, which must be a positive integer (number of
6182 	 * milliseconds) to wait, or 0 (use default value of STRTIMOUT
6183 	 * milliseconds), or -1 (wait forever).  This will be awakened
6184 	 * either by an ACK/NAK message arriving, the timer expiring, or
6185 	 * the timer expiring on another ioctl waiting for control of the
6186 	 * mechanism.
6187 	 */
6188 waitioc:
6189 	mutex_enter(&stp->sd_lock);
6190 
6191 
6192 	/*
6193 	 * If the reply has already arrived, don't sleep.  If awakened from
6194 	 * the sleep, fail only if the reply has not arrived by then.
6195 	 * Otherwise, process the reply.
6196 	 */
6197 	while (!stp->sd_iocblk) {
6198 		clock_t cv_rval;
6199 
6200 		if (stp->sd_flag & errs) {
6201 			error = strgeterr(stp, errs, 0);
6202 			if (error != 0) {
6203 				stp->sd_flag &= ~waitflags;
6204 				cv_broadcast(&stp->sd_iocmonitor);
6205 				mutex_exit(&stp->sd_lock);
6206 				crfree(crp);
6207 				return (error);
6208 			}
6209 		}
6210 
6211 		TRACE_0(TR_FAC_STREAMS_FR,
6212 		    TR_STRDOIOCTL_WAIT2,
6213 		    "strdoioctl sleeps awaiting reply");
6214 		ASSERT(error == 0);
6215 
6216 		cv_rval = str_cv_wait(&stp->sd_monitor, &stp->sd_lock,
6217 		    (strioc->ic_timout ?
6218 		    strioc->ic_timout * 1000 : STRTIMOUT), sigflag);
6219 
6220 		/*
6221 		 * There are four possible cases here: interrupt, timeout,
6222 		 * wakeup by IOCWAITNE (above), or wakeup by strrput_nondata (a
6223 		 * valid M_IOCTL reply).
6224 		 *
6225 		 * If we've been awakened by a STR_NOERROR ioctl on some other
6226 		 * thread, then sd_iocblk will still be NULL, and IOCWAITNE
6227 		 * will be set.  Pretend as if we just timed out.  Note that
6228 		 * this other thread waited at least STRTIMOUT before trying to
6229 		 * awaken our thread, so this is indistinguishable (even for
6230 		 * INFTIM) from the case where we failed with ETIME waiting on
6231 		 * IOCWAIT in the prior loop.
6232 		 */
6233 		if (cv_rval > 0 && !(flag & STR_NOERROR) &&
6234 		    stp->sd_iocblk == NULL && (stp->sd_flag & IOCWAITNE)) {
6235 			cv_rval = -1;
6236 		}
6237 
6238 		/*
6239 		 * note: STR_NOERROR does not protect
6240 		 * us here.. use ic_timout < 0
6241 		 */
6242 		if (cv_rval <= 0) {
6243 			if (cv_rval == 0) {
6244 				error = EINTR;
6245 			} else {
6246 				error =  ETIME;
6247 			}
6248 			/*
6249 			 * A message could have come in after we were scheduled
6250 			 * but before we were actually run.
6251 			 */
6252 			bp = stp->sd_iocblk;
6253 			stp->sd_iocblk = NULL;
6254 			if (bp != NULL) {
6255 				if ((bp->b_datap->db_type == M_COPYIN) ||
6256 				    (bp->b_datap->db_type == M_COPYOUT)) {
6257 					mutex_exit(&stp->sd_lock);
6258 					if (bp->b_cont) {
6259 						freemsg(bp->b_cont);
6260 						bp->b_cont = NULL;
6261 					}
6262 					bp->b_datap->db_type = M_IOCDATA;
6263 					bp->b_wptr = bp->b_rptr +
6264 					    sizeof (struct copyresp);
6265 					resp = (struct copyresp *)bp->b_rptr;
6266 					resp->cp_rval =
6267 					    (caddr_t)1; /* failure */
6268 					stream_willservice(stp);
6269 					putnext(stp->sd_wrq, bp);
6270 					stream_runservice(stp);
6271 					mutex_enter(&stp->sd_lock);
6272 				} else {
6273 					freemsg(bp);
6274 				}
6275 			}
6276 			stp->sd_flag &= ~waitflags;
6277 			cv_broadcast(&stp->sd_iocmonitor);
6278 			mutex_exit(&stp->sd_lock);
6279 			crfree(crp);
6280 			return (error);
6281 		}
6282 	}
6283 	bp = stp->sd_iocblk;
6284 	/*
6285 	 * Note: it is strictly impossible to get here with sd_iocblk set to
6286 	 * -1.  This is because the initial loop above doesn't allow any new
6287 	 * ioctls into the fray until all others have passed this point.
6288 	 */
6289 	ASSERT(bp != NULL && bp != (mblk_t *)-1);
6290 	TRACE_1(TR_FAC_STREAMS_FR,
6291 	    TR_STRDOIOCTL_ACK, "strdoioctl got reply: bp %p", bp);
6292 	if ((bp->b_datap->db_type == M_IOCACK) ||
6293 	    (bp->b_datap->db_type == M_IOCNAK)) {
6294 		/* for detection of duplicate ioctl replies */
6295 		stp->sd_iocblk = (mblk_t *)-1;
6296 		stp->sd_flag &= ~waitflags;
6297 		cv_broadcast(&stp->sd_iocmonitor);
6298 		mutex_exit(&stp->sd_lock);
6299 	} else {
6300 		/*
6301 		 * flags not cleared here because we're still doing
6302 		 * copy in/out for ioctl.
6303 		 */
6304 		stp->sd_iocblk = NULL;
6305 		mutex_exit(&stp->sd_lock);
6306 	}
6307 
6308 
6309 	/*
6310 	 * Have received acknowledgment.
6311 	 */
6312 
6313 	switch (bp->b_datap->db_type) {
6314 	case M_IOCACK:
6315 		/*
6316 		 * Positive ack.
6317 		 */
6318 		iocbp = (struct iocblk *)bp->b_rptr;
6319 
6320 		/*
6321 		 * Set error if indicated.
6322 		 */
6323 		if (iocbp->ioc_error) {
6324 			error = iocbp->ioc_error;
6325 			break;
6326 		}
6327 
6328 		/*
6329 		 * Set return value.
6330 		 */
6331 		*rvalp = iocbp->ioc_rval;
6332 
6333 		/*
6334 		 * Data may have been returned in ACK message (ioc_count > 0).
6335 		 * If so, copy it out to the user's buffer.
6336 		 */
6337 		if (iocbp->ioc_count && !transparent) {
6338 			if (error = getiocd(bp, strioc->ic_dp, copyflag))
6339 				break;
6340 		}
6341 		if (!transparent) {
6342 			if (len)	/* an M_COPYOUT was used with I_STR */
6343 				strioc->ic_len = len;
6344 			else
6345 				strioc->ic_len = (int)iocbp->ioc_count;
6346 		}
6347 		break;
6348 
6349 	case M_IOCNAK:
6350 		/*
6351 		 * Negative ack.
6352 		 *
6353 		 * The only thing to do is set error as specified
6354 		 * in neg ack packet.
6355 		 */
6356 		iocbp = (struct iocblk *)bp->b_rptr;
6357 
6358 		error = (iocbp->ioc_error ? iocbp->ioc_error : EINVAL);
6359 		break;
6360 
6361 	case M_COPYIN:
6362 		/*
6363 		 * Driver or module has requested user ioctl data.
6364 		 */
6365 		reqp = (struct copyreq *)bp->b_rptr;
6366 
6367 		/*
6368 		 * M_COPYIN should *never* have a message attached, though
6369 		 * it's harmless if it does -- thus, panic on a DEBUG
6370 		 * kernel and just free it on a non-DEBUG build.
6371 		 */
6372 		ASSERT(bp->b_cont == NULL);
6373 		if (bp->b_cont != NULL) {
6374 			freemsg(bp->b_cont);
6375 			bp->b_cont = NULL;
6376 		}
6377 
6378 		error = putiocd(bp, reqp->cq_addr, flag, crp);
6379 		if (error && bp->b_cont) {
6380 			freemsg(bp->b_cont);
6381 			bp->b_cont = NULL;
6382 		}
6383 
6384 		bp->b_wptr = bp->b_rptr + sizeof (struct copyresp);
6385 		bp->b_datap->db_type = M_IOCDATA;
6386 
6387 		mblk_setcred(bp, crp, curproc->p_pid);
6388 		resp = (struct copyresp *)bp->b_rptr;
6389 		resp->cp_rval = (caddr_t)(uintptr_t)error;
6390 		resp->cp_flag = (fflags & FMODELS);
6391 
6392 		stream_willservice(stp);
6393 		putnext(stp->sd_wrq, bp);
6394 		stream_runservice(stp);
6395 
6396 		if (error) {
6397 			mutex_enter(&stp->sd_lock);
6398 			stp->sd_flag &= ~waitflags;
6399 			cv_broadcast(&stp->sd_iocmonitor);
6400 			mutex_exit(&stp->sd_lock);
6401 			crfree(crp);
6402 			return (error);
6403 		}
6404 
6405 		goto waitioc;
6406 
6407 	case M_COPYOUT:
6408 		/*
6409 		 * Driver or module has ioctl data for a user.
6410 		 */
6411 		reqp = (struct copyreq *)bp->b_rptr;
6412 		ASSERT(bp->b_cont != NULL);
6413 
6414 		/*
6415 		 * Always (transparent or non-transparent )
6416 		 * use the address specified in the request
6417 		 */
6418 		taddr = reqp->cq_addr;
6419 		if (!transparent)
6420 			len = (int)reqp->cq_size;
6421 
6422 		/* copyout data to the provided address */
6423 		error = getiocd(bp, taddr, copyflag);
6424 
6425 		freemsg(bp->b_cont);
6426 		bp->b_cont = NULL;
6427 
6428 		bp->b_wptr = bp->b_rptr + sizeof (struct copyresp);
6429 		bp->b_datap->db_type = M_IOCDATA;
6430 
6431 		mblk_setcred(bp, crp, curproc->p_pid);
6432 		resp = (struct copyresp *)bp->b_rptr;
6433 		resp->cp_rval = (caddr_t)(uintptr_t)error;
6434 		resp->cp_flag = (fflags & FMODELS);
6435 
6436 		stream_willservice(stp);
6437 		putnext(stp->sd_wrq, bp);
6438 		stream_runservice(stp);
6439 
6440 		if (error) {
6441 			mutex_enter(&stp->sd_lock);
6442 			stp->sd_flag &= ~waitflags;
6443 			cv_broadcast(&stp->sd_iocmonitor);
6444 			mutex_exit(&stp->sd_lock);
6445 			crfree(crp);
6446 			return (error);
6447 		}
6448 		goto waitioc;
6449 
6450 	default:
6451 		ASSERT(0);
6452 		mutex_enter(&stp->sd_lock);
6453 		stp->sd_flag &= ~waitflags;
6454 		cv_broadcast(&stp->sd_iocmonitor);
6455 		mutex_exit(&stp->sd_lock);
6456 		break;
6457 	}
6458 
6459 	freemsg(bp);
6460 	crfree(crp);
6461 	return (error);
6462 }
6463 
6464 /*
6465  * Send an M_CMD message downstream and wait for a reply.  This is a ptools
6466  * special used to retrieve information from modules/drivers a stream without
6467  * being subjected to flow control or interfering with pending messages on the
6468  * stream (e.g. an ioctl in flight).
6469  */
6470 int
strdocmd(struct stdata * stp,struct strcmd * scp,cred_t * crp)6471 strdocmd(struct stdata *stp, struct strcmd *scp, cred_t *crp)
6472 {
6473 	mblk_t *mp;
6474 	struct cmdblk *cmdp;
6475 	int error = 0;
6476 	int errs = STRHUP|STRDERR|STWRERR|STPLEX;
6477 	clock_t rval, timeout = STRTIMOUT;
6478 
6479 	if (scp->sc_len < 0 || scp->sc_len > sizeof (scp->sc_buf) ||
6480 	    scp->sc_timeout < -1)
6481 		return (EINVAL);
6482 
6483 	if (scp->sc_timeout > 0)
6484 		timeout = scp->sc_timeout * MILLISEC;
6485 
6486 	if ((mp = allocb_cred(sizeof (struct cmdblk), crp,
6487 	    curproc->p_pid)) == NULL)
6488 		return (ENOMEM);
6489 
6490 	crhold(crp);
6491 
6492 	cmdp = (struct cmdblk *)mp->b_wptr;
6493 	cmdp->cb_cr = crp;
6494 	cmdp->cb_cmd = scp->sc_cmd;
6495 	cmdp->cb_len = scp->sc_len;
6496 	cmdp->cb_error = 0;
6497 	mp->b_wptr += sizeof (struct cmdblk);
6498 
6499 	DB_TYPE(mp) = M_CMD;
6500 	DB_CPID(mp) = curproc->p_pid;
6501 
6502 	/*
6503 	 * Copy in the payload.
6504 	 */
6505 	if (cmdp->cb_len > 0) {
6506 		mp->b_cont = allocb_cred(sizeof (scp->sc_buf), crp,
6507 		    curproc->p_pid);
6508 		if (mp->b_cont == NULL) {
6509 			error = ENOMEM;
6510 			goto out;
6511 		}
6512 
6513 		/* cb_len comes from sc_len, which has already been checked */
6514 		ASSERT(cmdp->cb_len <= sizeof (scp->sc_buf));
6515 		(void) bcopy(scp->sc_buf, mp->b_cont->b_wptr, cmdp->cb_len);
6516 		mp->b_cont->b_wptr += cmdp->cb_len;
6517 		DB_CPID(mp->b_cont) = curproc->p_pid;
6518 	}
6519 
6520 	/*
6521 	 * Since this mechanism is strictly for ptools, and since only one
6522 	 * process can be grabbed at a time, we simply fail if there's
6523 	 * currently an operation pending.
6524 	 */
6525 	mutex_enter(&stp->sd_lock);
6526 	if (stp->sd_flag & STRCMDWAIT) {
6527 		mutex_exit(&stp->sd_lock);
6528 		error = EBUSY;
6529 		goto out;
6530 	}
6531 	stp->sd_flag |= STRCMDWAIT;
6532 	ASSERT(stp->sd_cmdblk == NULL);
6533 	mutex_exit(&stp->sd_lock);
6534 
6535 	putnext(stp->sd_wrq, mp);
6536 	mp = NULL;
6537 
6538 	/*
6539 	 * Timed wait for acknowledgment.  If the reply has already arrived,
6540 	 * don't sleep.  If awakened from the sleep, fail only if the reply
6541 	 * has not arrived by then.  Otherwise, process the reply.
6542 	 */
6543 	mutex_enter(&stp->sd_lock);
6544 	while (stp->sd_cmdblk == NULL) {
6545 		if (stp->sd_flag & errs) {
6546 			if ((error = strgeterr(stp, errs, 0)) != 0)
6547 				goto waitout;
6548 		}
6549 
6550 		rval = str_cv_wait(&stp->sd_monitor, &stp->sd_lock, timeout, 0);
6551 		if (stp->sd_cmdblk != NULL)
6552 			break;
6553 
6554 		if (rval <= 0) {
6555 			error = (rval == 0) ? EINTR : ETIME;
6556 			goto waitout;
6557 		}
6558 	}
6559 
6560 	/*
6561 	 * We received a reply.
6562 	 */
6563 	mp = stp->sd_cmdblk;
6564 	stp->sd_cmdblk = NULL;
6565 	ASSERT(mp != NULL && DB_TYPE(mp) == M_CMD);
6566 	ASSERT(stp->sd_flag & STRCMDWAIT);
6567 	stp->sd_flag &= ~STRCMDWAIT;
6568 	mutex_exit(&stp->sd_lock);
6569 
6570 	cmdp = (struct cmdblk *)mp->b_rptr;
6571 	if ((error = cmdp->cb_error) != 0)
6572 		goto out;
6573 
6574 	/*
6575 	 * Data may have been returned in the reply (cb_len > 0).
6576 	 * If so, copy it out to the user's buffer.
6577 	 */
6578 	if (cmdp->cb_len > 0) {
6579 		if (mp->b_cont == NULL || MBLKL(mp->b_cont) < cmdp->cb_len) {
6580 			error = EPROTO;
6581 			goto out;
6582 		}
6583 
6584 		cmdp->cb_len = MIN(cmdp->cb_len, sizeof (scp->sc_buf));
6585 		(void) bcopy(mp->b_cont->b_rptr, scp->sc_buf, cmdp->cb_len);
6586 	}
6587 	scp->sc_len = cmdp->cb_len;
6588 out:
6589 	freemsg(mp);
6590 	crfree(crp);
6591 	return (error);
6592 waitout:
6593 	ASSERT(stp->sd_cmdblk == NULL);
6594 	stp->sd_flag &= ~STRCMDWAIT;
6595 	mutex_exit(&stp->sd_lock);
6596 	crfree(crp);
6597 	return (error);
6598 }
6599 
6600 /*
6601  * For the SunOS keyboard driver.
6602  * Return the next available "ioctl" sequence number.
6603  * Exported, so that streams modules can send "ioctl" messages
6604  * downstream from their open routine.
6605  */
6606 int
getiocseqno(void)6607 getiocseqno(void)
6608 {
6609 	int	i;
6610 
6611 	mutex_enter(&strresources);
6612 	i = ++ioc_id;
6613 	mutex_exit(&strresources);
6614 	return (i);
6615 }
6616 
6617 /*
6618  * Get the next message from the read queue.  If the message is
6619  * priority, STRPRI will have been set by strrput().  This flag
6620  * should be reset only when the entire message at the front of the
6621  * queue as been consumed.
6622  *
6623  * NOTE: strgetmsg and kstrgetmsg have much of the logic in common.
6624  */
6625 int
strgetmsg(struct vnode * vp,struct strbuf * mctl,struct strbuf * mdata,unsigned char * prip,int * flagsp,int fmode,rval_t * rvp)6626 strgetmsg(
6627 	struct vnode *vp,
6628 	struct strbuf *mctl,
6629 	struct strbuf *mdata,
6630 	unsigned char *prip,
6631 	int *flagsp,
6632 	int fmode,
6633 	rval_t *rvp)
6634 {
6635 	struct stdata *stp;
6636 	mblk_t *bp, *nbp;
6637 	mblk_t *savemp = NULL;
6638 	mblk_t *savemptail = NULL;
6639 	uint_t old_sd_flag;
6640 	int flg = MSG_BAND;
6641 	int more = 0;
6642 	int error = 0;
6643 	char first = 1;
6644 	uint_t mark;		/* Contains MSG*MARK and _LASTMARK */
6645 #define	_LASTMARK	0x8000	/* Distinct from MSG*MARK */
6646 	unsigned char pri = 0;
6647 	queue_t *q;
6648 	int	pr = 0;			/* Partial read successful */
6649 	struct uio uios;
6650 	struct uio *uiop = &uios;
6651 	struct iovec iovs;
6652 	unsigned char type;
6653 
6654 	TRACE_1(TR_FAC_STREAMS_FR, TR_STRGETMSG_ENTER,
6655 	    "strgetmsg:%p", vp);
6656 
6657 	ASSERT(vp->v_stream);
6658 	stp = vp->v_stream;
6659 	rvp->r_val1 = 0;
6660 
6661 	mutex_enter(&stp->sd_lock);
6662 
6663 	if ((error = i_straccess(stp, JCREAD)) != 0) {
6664 		mutex_exit(&stp->sd_lock);
6665 		return (error);
6666 	}
6667 
6668 	if (stp->sd_flag & (STRDERR|STPLEX)) {
6669 		error = strgeterr(stp, STRDERR|STPLEX, 0);
6670 		if (error != 0) {
6671 			mutex_exit(&stp->sd_lock);
6672 			return (error);
6673 		}
6674 	}
6675 	mutex_exit(&stp->sd_lock);
6676 
6677 	switch (*flagsp) {
6678 	case MSG_HIPRI:
6679 		if (*prip != 0)
6680 			return (EINVAL);
6681 		break;
6682 
6683 	case MSG_ANY:
6684 	case MSG_BAND:
6685 		break;
6686 
6687 	default:
6688 		return (EINVAL);
6689 	}
6690 	/*
6691 	 * Setup uio and iov for data part
6692 	 */
6693 	iovs.iov_base = mdata->buf;
6694 	iovs.iov_len = mdata->maxlen;
6695 	uios.uio_iov = &iovs;
6696 	uios.uio_iovcnt = 1;
6697 	uios.uio_loffset = 0;
6698 	uios.uio_segflg = UIO_USERSPACE;
6699 	uios.uio_fmode = 0;
6700 	uios.uio_extflg = UIO_COPY_CACHED;
6701 	uios.uio_resid = mdata->maxlen;
6702 	uios.uio_offset = 0;
6703 
6704 	q = _RD(stp->sd_wrq);
6705 	mutex_enter(&stp->sd_lock);
6706 	old_sd_flag = stp->sd_flag;
6707 	mark = 0;
6708 	for (;;) {
6709 		int done = 0;
6710 		mblk_t *q_first = q->q_first;
6711 
6712 		/*
6713 		 * Get the next message of appropriate priority
6714 		 * from the stream head.  If the caller is interested
6715 		 * in band or hipri messages, then they should already
6716 		 * be enqueued at the stream head.  On the other hand
6717 		 * if the caller wants normal (band 0) messages, they
6718 		 * might be deferred in a synchronous stream and they
6719 		 * will need to be pulled up.
6720 		 *
6721 		 * After we have dequeued a message, we might find that
6722 		 * it was a deferred M_SIG that was enqueued at the
6723 		 * stream head.  It must now be posted as part of the
6724 		 * read by calling strsignal_nolock().
6725 		 *
6726 		 * Also note that strrput does not enqueue an M_PCSIG,
6727 		 * and there cannot be more than one hipri message,
6728 		 * so there was no need to have the M_PCSIG case.
6729 		 *
6730 		 * At some time it might be nice to try and wrap the
6731 		 * functionality of kstrgetmsg() and strgetmsg() into
6732 		 * a common routine so to reduce the amount of replicated
6733 		 * code (since they are extremely similar).
6734 		 */
6735 		if (!(*flagsp & (MSG_HIPRI|MSG_BAND))) {
6736 			/* Asking for normal, band0 data */
6737 			bp = strget(stp, q, uiop, first, &error);
6738 			ASSERT(MUTEX_HELD(&stp->sd_lock));
6739 			if (bp != NULL) {
6740 				if (DB_TYPE(bp) == M_SIG) {
6741 					strsignal_nolock(stp, *bp->b_rptr,
6742 					    bp->b_band);
6743 					freemsg(bp);
6744 					continue;
6745 				} else {
6746 					break;
6747 				}
6748 			}
6749 			if (error != 0)
6750 				goto getmout;
6751 
6752 		/*
6753 		 * We can't depend on the value of STRPRI here because
6754 		 * the stream head may be in transit. Therefore, we
6755 		 * must look at the type of the first message to
6756 		 * determine if a high priority messages is waiting
6757 		 */
6758 		} else if ((*flagsp & MSG_HIPRI) && q_first != NULL &&
6759 		    DB_TYPE(q_first) >= QPCTL &&
6760 		    (bp = getq_noenab(q, 0)) != NULL) {
6761 			/* Asked for HIPRI and got one */
6762 			ASSERT(DB_TYPE(bp) >= QPCTL);
6763 			break;
6764 		} else if ((*flagsp & MSG_BAND) && q_first != NULL &&
6765 		    ((q_first->b_band >= *prip) || DB_TYPE(q_first) >= QPCTL) &&
6766 		    (bp = getq_noenab(q, 0)) != NULL) {
6767 			/*
6768 			 * Asked for at least band "prip" and got either at
6769 			 * least that band or a hipri message.
6770 			 */
6771 			ASSERT(bp->b_band >= *prip || DB_TYPE(bp) >= QPCTL);
6772 			if (DB_TYPE(bp) == M_SIG) {
6773 				strsignal_nolock(stp, *bp->b_rptr, bp->b_band);
6774 				freemsg(bp);
6775 				continue;
6776 			} else {
6777 				break;
6778 			}
6779 		}
6780 
6781 		/* No data. Time to sleep? */
6782 		qbackenable(q, 0);
6783 
6784 		/*
6785 		 * If STRHUP or STREOF, return 0 length control and data.
6786 		 * If resid is 0, then a read(fd,buf,0) was done. Do not
6787 		 * sleep to satisfy this request because by default we have
6788 		 * zero bytes to return.
6789 		 */
6790 		if ((stp->sd_flag & (STRHUP|STREOF)) || (mctl->maxlen == 0 &&
6791 		    mdata->maxlen == 0)) {
6792 			mctl->len = mdata->len = 0;
6793 			*flagsp = 0;
6794 			mutex_exit(&stp->sd_lock);
6795 			return (0);
6796 		}
6797 		TRACE_2(TR_FAC_STREAMS_FR, TR_STRGETMSG_WAIT,
6798 		    "strgetmsg calls strwaitq:%p, %p",
6799 		    vp, uiop);
6800 		if (((error = strwaitq(stp, GETWAIT, (ssize_t)0, fmode, -1,
6801 		    &done)) != 0) || done) {
6802 			TRACE_2(TR_FAC_STREAMS_FR, TR_STRGETMSG_DONE,
6803 			    "strgetmsg error or done:%p, %p",
6804 			    vp, uiop);
6805 			mutex_exit(&stp->sd_lock);
6806 			return (error);
6807 		}
6808 		TRACE_2(TR_FAC_STREAMS_FR, TR_STRGETMSG_AWAKE,
6809 		    "strgetmsg awakes:%p, %p", vp, uiop);
6810 		if ((error = i_straccess(stp, JCREAD)) != 0) {
6811 			mutex_exit(&stp->sd_lock);
6812 			return (error);
6813 		}
6814 		first = 0;
6815 	}
6816 	ASSERT(bp != NULL);
6817 	/*
6818 	 * Extract any mark information. If the message is not completely
6819 	 * consumed this information will be put in the mblk
6820 	 * that is putback.
6821 	 * If MSGMARKNEXT is set and the message is completely consumed
6822 	 * the STRATMARK flag will be set below. Likewise, if
6823 	 * MSGNOTMARKNEXT is set and the message is
6824 	 * completely consumed STRNOTATMARK will be set.
6825 	 */
6826 	mark = bp->b_flag & (MSGMARK | MSGMARKNEXT | MSGNOTMARKNEXT);
6827 	ASSERT((mark & (MSGMARKNEXT|MSGNOTMARKNEXT)) !=
6828 	    (MSGMARKNEXT|MSGNOTMARKNEXT));
6829 	if (mark != 0 && bp == stp->sd_mark) {
6830 		mark |= _LASTMARK;
6831 		stp->sd_mark = NULL;
6832 	}
6833 	/*
6834 	 * keep track of the original message type and priority
6835 	 */
6836 	pri = bp->b_band;
6837 	type = bp->b_datap->db_type;
6838 	if (type == M_PASSFP) {
6839 		if ((mark & _LASTMARK) && (stp->sd_mark == NULL))
6840 			stp->sd_mark = bp;
6841 		bp->b_flag |= mark & ~_LASTMARK;
6842 		putback(stp, q, bp, pri);
6843 		qbackenable(q, pri);
6844 		mutex_exit(&stp->sd_lock);
6845 		return (EBADMSG);
6846 	}
6847 	ASSERT(type != M_SIG);
6848 
6849 	/*
6850 	 * Set this flag so strrput will not generate signals. Need to
6851 	 * make sure this flag is cleared before leaving this routine
6852 	 * else signals will stop being sent.
6853 	 */
6854 	stp->sd_flag |= STRGETINPROG;
6855 	mutex_exit(&stp->sd_lock);
6856 
6857 	if (STREAM_NEEDSERVICE(stp))
6858 		stream_runservice(stp);
6859 
6860 	/*
6861 	 * Set HIPRI flag if message is priority.
6862 	 */
6863 	if (type >= QPCTL)
6864 		flg = MSG_HIPRI;
6865 	else
6866 		flg = MSG_BAND;
6867 
6868 	/*
6869 	 * First process PROTO or PCPROTO blocks, if any.
6870 	 */
6871 	if (mctl->maxlen >= 0 && type != M_DATA) {
6872 		size_t	n, bcnt;
6873 		char	*ubuf;
6874 
6875 		bcnt = mctl->maxlen;
6876 		ubuf = mctl->buf;
6877 		while (bp != NULL && bp->b_datap->db_type != M_DATA) {
6878 			if ((n = MIN(bcnt, bp->b_wptr - bp->b_rptr)) != 0 &&
6879 			    copyout(bp->b_rptr, ubuf, n)) {
6880 				error = EFAULT;
6881 				mutex_enter(&stp->sd_lock);
6882 				/*
6883 				 * clear stream head pri flag based on
6884 				 * first message type
6885 				 */
6886 				if (type >= QPCTL) {
6887 					ASSERT(type == M_PCPROTO);
6888 					stp->sd_flag &= ~STRPRI;
6889 				}
6890 				more = 0;
6891 				freemsg(bp);
6892 				goto getmout;
6893 			}
6894 			ubuf += n;
6895 			bp->b_rptr += n;
6896 			if (bp->b_rptr >= bp->b_wptr) {
6897 				nbp = bp;
6898 				bp = bp->b_cont;
6899 				freeb(nbp);
6900 			}
6901 			ASSERT(n <= bcnt);
6902 			bcnt -= n;
6903 			if (bcnt == 0)
6904 				break;
6905 		}
6906 		mctl->len = mctl->maxlen - bcnt;
6907 	} else
6908 		mctl->len = -1;
6909 
6910 	if (bp && bp->b_datap->db_type != M_DATA) {
6911 		/*
6912 		 * More PROTO blocks in msg.
6913 		 */
6914 		more |= MORECTL;
6915 		savemp = bp;
6916 		while (bp && bp->b_datap->db_type != M_DATA) {
6917 			savemptail = bp;
6918 			bp = bp->b_cont;
6919 		}
6920 		savemptail->b_cont = NULL;
6921 	}
6922 
6923 	/*
6924 	 * Now process DATA blocks, if any.
6925 	 */
6926 	if (mdata->maxlen >= 0 && bp) {
6927 		/*
6928 		 * struiocopyout will consume a potential zero-length
6929 		 * M_DATA even if uio_resid is zero.
6930 		 */
6931 		size_t oldresid = uiop->uio_resid;
6932 
6933 		bp = struiocopyout(bp, uiop, &error);
6934 		if (error != 0) {
6935 			mutex_enter(&stp->sd_lock);
6936 			/*
6937 			 * clear stream head hi pri flag based on
6938 			 * first message
6939 			 */
6940 			if (type >= QPCTL) {
6941 				ASSERT(type == M_PCPROTO);
6942 				stp->sd_flag &= ~STRPRI;
6943 			}
6944 			more = 0;
6945 			freemsg(savemp);
6946 			goto getmout;
6947 		}
6948 		/*
6949 		 * (pr == 1) indicates a partial read.
6950 		 */
6951 		if (oldresid > uiop->uio_resid)
6952 			pr = 1;
6953 		mdata->len = mdata->maxlen - uiop->uio_resid;
6954 	} else
6955 		mdata->len = -1;
6956 
6957 	if (bp) {			/* more data blocks in msg */
6958 		more |= MOREDATA;
6959 		if (savemp)
6960 			savemptail->b_cont = bp;
6961 		else
6962 			savemp = bp;
6963 	}
6964 
6965 	mutex_enter(&stp->sd_lock);
6966 	if (savemp) {
6967 		if (pr && (savemp->b_datap->db_type == M_DATA) &&
6968 		    msgnodata(savemp)) {
6969 			/*
6970 			 * Avoid queuing a zero-length tail part of
6971 			 * a message. pr=1 indicates that we read some of
6972 			 * the message.
6973 			 */
6974 			freemsg(savemp);
6975 			more &= ~MOREDATA;
6976 			/*
6977 			 * clear stream head hi pri flag based on
6978 			 * first message
6979 			 */
6980 			if (type >= QPCTL) {
6981 				ASSERT(type == M_PCPROTO);
6982 				stp->sd_flag &= ~STRPRI;
6983 			}
6984 		} else {
6985 			savemp->b_band = pri;
6986 			/*
6987 			 * If the first message was HIPRI and the one we're
6988 			 * putting back isn't, then clear STRPRI, otherwise
6989 			 * set STRPRI again.  Note that we must set STRPRI
6990 			 * again since the flush logic in strrput_nondata()
6991 			 * may have cleared it while we had sd_lock dropped.
6992 			 */
6993 			if (type >= QPCTL) {
6994 				ASSERT(type == M_PCPROTO);
6995 				if (queclass(savemp) < QPCTL)
6996 					stp->sd_flag &= ~STRPRI;
6997 				else
6998 					stp->sd_flag |= STRPRI;
6999 			} else if (queclass(savemp) >= QPCTL) {
7000 				/*
7001 				 * The first message was not a HIPRI message,
7002 				 * but the one we are about to putback is.
7003 				 * For simplicitly, we do not allow for HIPRI
7004 				 * messages to be embedded in the message
7005 				 * body, so just force it to same type as
7006 				 * first message.
7007 				 */
7008 				ASSERT(type == M_DATA || type == M_PROTO);
7009 				ASSERT(savemp->b_datap->db_type == M_PCPROTO);
7010 				savemp->b_datap->db_type = type;
7011 			}
7012 			if (mark != 0) {
7013 				savemp->b_flag |= mark & ~_LASTMARK;
7014 				if ((mark & _LASTMARK) &&
7015 				    (stp->sd_mark == NULL)) {
7016 					/*
7017 					 * If another marked message arrived
7018 					 * while sd_lock was not held sd_mark
7019 					 * would be non-NULL.
7020 					 */
7021 					stp->sd_mark = savemp;
7022 				}
7023 			}
7024 			putback(stp, q, savemp, pri);
7025 		}
7026 	} else {
7027 		/*
7028 		 * The complete message was consumed.
7029 		 *
7030 		 * If another M_PCPROTO arrived while sd_lock was not held
7031 		 * it would have been discarded since STRPRI was still set.
7032 		 *
7033 		 * Move the MSG*MARKNEXT information
7034 		 * to the stream head just in case
7035 		 * the read queue becomes empty.
7036 		 * clear stream head hi pri flag based on
7037 		 * first message
7038 		 *
7039 		 * If the stream head was at the mark
7040 		 * (STRATMARK) before we dropped sd_lock above
7041 		 * and some data was consumed then we have
7042 		 * moved past the mark thus STRATMARK is
7043 		 * cleared. However, if a message arrived in
7044 		 * strrput during the copyout above causing
7045 		 * STRATMARK to be set we can not clear that
7046 		 * flag.
7047 		 */
7048 		if (type >= QPCTL) {
7049 			ASSERT(type == M_PCPROTO);
7050 			stp->sd_flag &= ~STRPRI;
7051 		}
7052 		if (mark & (MSGMARKNEXT|MSGNOTMARKNEXT|MSGMARK)) {
7053 			if (mark & MSGMARKNEXT) {
7054 				stp->sd_flag &= ~STRNOTATMARK;
7055 				stp->sd_flag |= STRATMARK;
7056 			} else if (mark & MSGNOTMARKNEXT) {
7057 				stp->sd_flag &= ~STRATMARK;
7058 				stp->sd_flag |= STRNOTATMARK;
7059 			} else {
7060 				stp->sd_flag &= ~(STRATMARK|STRNOTATMARK);
7061 			}
7062 		} else if (pr && (old_sd_flag & STRATMARK)) {
7063 			stp->sd_flag &= ~STRATMARK;
7064 		}
7065 	}
7066 
7067 	*flagsp = flg;
7068 	*prip = pri;
7069 
7070 	/*
7071 	 * Getmsg cleanup processing - if the state of the queue has changed
7072 	 * some signals may need to be sent and/or poll awakened.
7073 	 */
7074 getmout:
7075 	qbackenable(q, pri);
7076 
7077 	/*
7078 	 * We dropped the stream head lock above. Send all M_SIG messages
7079 	 * before processing stream head for SIGPOLL messages.
7080 	 */
7081 	ASSERT(MUTEX_HELD(&stp->sd_lock));
7082 	while ((bp = q->q_first) != NULL &&
7083 	    (bp->b_datap->db_type == M_SIG)) {
7084 		/*
7085 		 * sd_lock is held so the content of the read queue can not
7086 		 * change.
7087 		 */
7088 		bp = getq(q);
7089 		ASSERT(bp != NULL && bp->b_datap->db_type == M_SIG);
7090 
7091 		strsignal_nolock(stp, *bp->b_rptr, bp->b_band);
7092 		mutex_exit(&stp->sd_lock);
7093 		freemsg(bp);
7094 		if (STREAM_NEEDSERVICE(stp))
7095 			stream_runservice(stp);
7096 		mutex_enter(&stp->sd_lock);
7097 	}
7098 
7099 	/*
7100 	 * stream head cannot change while we make the determination
7101 	 * whether or not to send a signal. Drop the flag to allow strrput
7102 	 * to send firstmsgsigs again.
7103 	 */
7104 	stp->sd_flag &= ~STRGETINPROG;
7105 
7106 	/*
7107 	 * If the type of message at the front of the queue changed
7108 	 * due to the receive the appropriate signals and pollwakeup events
7109 	 * are generated. The type of changes are:
7110 	 *	Processed a hipri message, q_first is not hipri.
7111 	 *	Processed a band X message, and q_first is band Y.
7112 	 * The generated signals and pollwakeups are identical to what
7113 	 * strrput() generates should the message that is now on q_first
7114 	 * arrive to an empty read queue.
7115 	 *
7116 	 * Note: only strrput will send a signal for a hipri message.
7117 	 */
7118 	if ((bp = q->q_first) != NULL && !(stp->sd_flag & STRPRI)) {
7119 		strsigset_t signals = 0;
7120 		strpollset_t pollwakeups = 0;
7121 
7122 		if (flg & MSG_HIPRI) {
7123 			/*
7124 			 * Removed a hipri message. Regular data at
7125 			 * the front of  the queue.
7126 			 */
7127 			if (bp->b_band == 0) {
7128 				signals = S_INPUT | S_RDNORM;
7129 				pollwakeups = POLLIN | POLLRDNORM;
7130 			} else {
7131 				signals = S_INPUT | S_RDBAND;
7132 				pollwakeups = POLLIN | POLLRDBAND;
7133 			}
7134 		} else if (pri != bp->b_band) {
7135 			/*
7136 			 * The band is different for the new q_first.
7137 			 */
7138 			if (bp->b_band == 0) {
7139 				signals = S_RDNORM;
7140 				pollwakeups = POLLIN | POLLRDNORM;
7141 			} else {
7142 				signals = S_RDBAND;
7143 				pollwakeups = POLLIN | POLLRDBAND;
7144 			}
7145 		}
7146 
7147 		if (pollwakeups != 0) {
7148 			if (pollwakeups == (POLLIN | POLLRDNORM)) {
7149 				if (!(stp->sd_rput_opt & SR_POLLIN))
7150 					goto no_pollwake;
7151 				stp->sd_rput_opt &= ~SR_POLLIN;
7152 			}
7153 			mutex_exit(&stp->sd_lock);
7154 			pollwakeup(&stp->sd_pollist, pollwakeups);
7155 			mutex_enter(&stp->sd_lock);
7156 		}
7157 no_pollwake:
7158 
7159 		if (stp->sd_sigflags & signals)
7160 			strsendsig(stp->sd_siglist, signals, bp->b_band, 0);
7161 	}
7162 	mutex_exit(&stp->sd_lock);
7163 
7164 	rvp->r_val1 = more;
7165 	return (error);
7166 #undef	_LASTMARK
7167 }
7168 
7169 /*
7170  * Get the next message from the read queue.  If the message is
7171  * priority, STRPRI will have been set by strrput().  This flag
7172  * should be reset only when the entire message at the front of the
7173  * queue as been consumed.
7174  *
7175  * If uiop is NULL all data is returned in mctlp.
7176  * Note that a NULL uiop implies that FNDELAY and FNONBLOCK are assumed
7177  * not enabled.
7178  * The timeout parameter is in milliseconds; -1 for infinity.
7179  * This routine handles the consolidation private flags:
7180  *	MSG_IGNERROR	Ignore any stream head error except STPLEX.
7181  *	MSG_DELAYERROR	Defer the error check until the queue is empty.
7182  *	MSG_HOLDSIG	Hold signals while waiting for data.
7183  *	MSG_IPEEK	Only peek at messages.
7184  *	MSG_DISCARDTAIL	Discard the tail M_DATA part of the message
7185  *			that doesn't fit.
7186  *	MSG_NOMARK	If the message is marked leave it on the queue.
7187  *
7188  * NOTE: strgetmsg and kstrgetmsg have much of the logic in common.
7189  */
7190 int
kstrgetmsg(struct vnode * vp,mblk_t ** mctlp,struct uio * uiop,unsigned char * prip,int * flagsp,clock_t timout,rval_t * rvp)7191 kstrgetmsg(
7192 	struct vnode *vp,
7193 	mblk_t **mctlp,
7194 	struct uio *uiop,
7195 	unsigned char *prip,
7196 	int *flagsp,
7197 	clock_t timout,
7198 	rval_t *rvp)
7199 {
7200 	struct stdata *stp;
7201 	mblk_t *bp, *nbp;
7202 	mblk_t *savemp = NULL;
7203 	mblk_t *savemptail = NULL;
7204 	int flags;
7205 	uint_t old_sd_flag;
7206 	int flg = MSG_BAND;
7207 	int more = 0;
7208 	int error = 0;
7209 	char first = 1;
7210 	uint_t mark;		/* Contains MSG*MARK and _LASTMARK */
7211 #define	_LASTMARK	0x8000	/* Distinct from MSG*MARK */
7212 	unsigned char pri = 0;
7213 	queue_t *q;
7214 	int	pr = 0;			/* Partial read successful */
7215 	unsigned char type;
7216 
7217 	TRACE_1(TR_FAC_STREAMS_FR, TR_KSTRGETMSG_ENTER,
7218 	    "kstrgetmsg:%p", vp);
7219 
7220 	ASSERT(vp->v_stream);
7221 	stp = vp->v_stream;
7222 	rvp->r_val1 = 0;
7223 
7224 	mutex_enter(&stp->sd_lock);
7225 
7226 	if ((error = i_straccess(stp, JCREAD)) != 0) {
7227 		mutex_exit(&stp->sd_lock);
7228 		return (error);
7229 	}
7230 
7231 	flags = *flagsp;
7232 	if (stp->sd_flag & (STRDERR|STPLEX)) {
7233 		if ((stp->sd_flag & STPLEX) ||
7234 		    (flags & (MSG_IGNERROR|MSG_DELAYERROR)) == 0) {
7235 			error = strgeterr(stp, STRDERR|STPLEX,
7236 			    (flags & MSG_IPEEK));
7237 			if (error != 0) {
7238 				mutex_exit(&stp->sd_lock);
7239 				return (error);
7240 			}
7241 		}
7242 	}
7243 	mutex_exit(&stp->sd_lock);
7244 
7245 	switch (flags & (MSG_HIPRI|MSG_ANY|MSG_BAND)) {
7246 	case MSG_HIPRI:
7247 		if (*prip != 0)
7248 			return (EINVAL);
7249 		break;
7250 
7251 	case MSG_ANY:
7252 	case MSG_BAND:
7253 		break;
7254 
7255 	default:
7256 		return (EINVAL);
7257 	}
7258 
7259 retry:
7260 	q = _RD(stp->sd_wrq);
7261 	mutex_enter(&stp->sd_lock);
7262 	old_sd_flag = stp->sd_flag;
7263 	mark = 0;
7264 	for (;;) {
7265 		int done = 0;
7266 		int waitflag;
7267 		int fmode;
7268 		mblk_t *q_first = q->q_first;
7269 
7270 		/*
7271 		 * This section of the code operates just like the code
7272 		 * in strgetmsg().  There is a comment there about what
7273 		 * is going on here.
7274 		 */
7275 		if (!(flags & (MSG_HIPRI|MSG_BAND))) {
7276 			/* Asking for normal, band0 data */
7277 			bp = strget(stp, q, uiop, first, &error);
7278 			ASSERT(MUTEX_HELD(&stp->sd_lock));
7279 			if (bp != NULL) {
7280 				if (DB_TYPE(bp) == M_SIG) {
7281 					strsignal_nolock(stp, *bp->b_rptr,
7282 					    bp->b_band);
7283 					freemsg(bp);
7284 					continue;
7285 				} else {
7286 					break;
7287 				}
7288 			}
7289 			if (error != 0) {
7290 				goto getmout;
7291 			}
7292 		/*
7293 		 * We can't depend on the value of STRPRI here because
7294 		 * the stream head may be in transit. Therefore, we
7295 		 * must look at the type of the first message to
7296 		 * determine if a high priority messages is waiting
7297 		 */
7298 		} else if ((flags & MSG_HIPRI) && q_first != NULL &&
7299 		    DB_TYPE(q_first) >= QPCTL &&
7300 		    (bp = getq_noenab(q, 0)) != NULL) {
7301 			ASSERT(DB_TYPE(bp) >= QPCTL);
7302 			break;
7303 		} else if ((flags & MSG_BAND) && q_first != NULL &&
7304 		    ((q_first->b_band >= *prip) || DB_TYPE(q_first) >= QPCTL) &&
7305 		    (bp = getq_noenab(q, 0)) != NULL) {
7306 			/*
7307 			 * Asked for at least band "prip" and got either at
7308 			 * least that band or a hipri message.
7309 			 */
7310 			ASSERT(bp->b_band >= *prip || DB_TYPE(bp) >= QPCTL);
7311 			if (DB_TYPE(bp) == M_SIG) {
7312 				strsignal_nolock(stp, *bp->b_rptr, bp->b_band);
7313 				freemsg(bp);
7314 				continue;
7315 			} else {
7316 				break;
7317 			}
7318 		}
7319 
7320 		/* No data. Time to sleep? */
7321 		qbackenable(q, 0);
7322 
7323 		/*
7324 		 * Delayed error notification?
7325 		 */
7326 		if ((stp->sd_flag & (STRDERR|STPLEX)) &&
7327 		    (flags & (MSG_IGNERROR|MSG_DELAYERROR)) == MSG_DELAYERROR) {
7328 			error = strgeterr(stp, STRDERR|STPLEX,
7329 			    (flags & MSG_IPEEK));
7330 			if (error != 0) {
7331 				mutex_exit(&stp->sd_lock);
7332 				return (error);
7333 			}
7334 		}
7335 
7336 		/*
7337 		 * If STRHUP or STREOF, return 0 length control and data.
7338 		 * If a read(fd,buf,0) has been done, do not sleep, just
7339 		 * return.
7340 		 *
7341 		 * If mctlp == NULL and uiop == NULL, then the code will
7342 		 * do the strwaitq. This is an understood way of saying
7343 		 * sleep "polling" until a message is received.
7344 		 */
7345 		if ((stp->sd_flag & (STRHUP|STREOF)) ||
7346 		    (uiop != NULL && uiop->uio_resid == 0)) {
7347 			if (mctlp != NULL)
7348 				*mctlp = NULL;
7349 			*flagsp = 0;
7350 			mutex_exit(&stp->sd_lock);
7351 			return (0);
7352 		}
7353 
7354 		waitflag = GETWAIT;
7355 		if (flags &
7356 		    (MSG_HOLDSIG|MSG_IGNERROR|MSG_IPEEK|MSG_DELAYERROR)) {
7357 			if (flags & MSG_HOLDSIG)
7358 				waitflag |= STR_NOSIG;
7359 			if (flags & MSG_IGNERROR)
7360 				waitflag |= STR_NOERROR;
7361 			if (flags & MSG_IPEEK)
7362 				waitflag |= STR_PEEK;
7363 			if (flags & MSG_DELAYERROR)
7364 				waitflag |= STR_DELAYERR;
7365 		}
7366 		if (uiop != NULL)
7367 			fmode = uiop->uio_fmode;
7368 		else
7369 			fmode = 0;
7370 
7371 		TRACE_2(TR_FAC_STREAMS_FR, TR_KSTRGETMSG_WAIT,
7372 		    "kstrgetmsg calls strwaitq:%p, %p",
7373 		    vp, uiop);
7374 		if (((error = strwaitq(stp, waitflag, (ssize_t)0,
7375 		    fmode, timout, &done))) != 0 || done) {
7376 			TRACE_2(TR_FAC_STREAMS_FR, TR_KSTRGETMSG_DONE,
7377 			    "kstrgetmsg error or done:%p, %p",
7378 			    vp, uiop);
7379 			mutex_exit(&stp->sd_lock);
7380 			return (error);
7381 		}
7382 		TRACE_2(TR_FAC_STREAMS_FR, TR_KSTRGETMSG_AWAKE,
7383 		    "kstrgetmsg awakes:%p, %p", vp, uiop);
7384 		if ((error = i_straccess(stp, JCREAD)) != 0) {
7385 			mutex_exit(&stp->sd_lock);
7386 			return (error);
7387 		}
7388 		first = 0;
7389 	}
7390 	ASSERT(bp != NULL);
7391 	/*
7392 	 * Extract any mark information. If the message is not completely
7393 	 * consumed this information will be put in the mblk
7394 	 * that is putback.
7395 	 * If MSGMARKNEXT is set and the message is completely consumed
7396 	 * the STRATMARK flag will be set below. Likewise, if
7397 	 * MSGNOTMARKNEXT is set and the message is
7398 	 * completely consumed STRNOTATMARK will be set.
7399 	 */
7400 	mark = bp->b_flag & (MSGMARK | MSGMARKNEXT | MSGNOTMARKNEXT);
7401 	ASSERT((mark & (MSGMARKNEXT|MSGNOTMARKNEXT)) !=
7402 	    (MSGMARKNEXT|MSGNOTMARKNEXT));
7403 	pri = bp->b_band;
7404 	if (mark != 0) {
7405 		/*
7406 		 * If the caller doesn't want the mark return.
7407 		 * Used to implement MSG_WAITALL in sockets.
7408 		 */
7409 		if (flags & MSG_NOMARK) {
7410 			putback(stp, q, bp, pri);
7411 			qbackenable(q, pri);
7412 			mutex_exit(&stp->sd_lock);
7413 			return (EWOULDBLOCK);
7414 		}
7415 		if (bp == stp->sd_mark) {
7416 			mark |= _LASTMARK;
7417 			stp->sd_mark = NULL;
7418 		}
7419 	}
7420 
7421 	/*
7422 	 * keep track of the first message type
7423 	 */
7424 	type = bp->b_datap->db_type;
7425 
7426 	if (bp->b_datap->db_type == M_PASSFP) {
7427 		if ((mark & _LASTMARK) && (stp->sd_mark == NULL))
7428 			stp->sd_mark = bp;
7429 		bp->b_flag |= mark & ~_LASTMARK;
7430 		putback(stp, q, bp, pri);
7431 		qbackenable(q, pri);
7432 		mutex_exit(&stp->sd_lock);
7433 		return (EBADMSG);
7434 	}
7435 	ASSERT(type != M_SIG);
7436 
7437 	if (flags & MSG_IPEEK) {
7438 		/*
7439 		 * Clear any struioflag - we do the uiomove over again
7440 		 * when peeking since it simplifies the code.
7441 		 *
7442 		 * Dup the message and put the original back on the queue.
7443 		 * If dupmsg() fails, try again with copymsg() to see if
7444 		 * there is indeed a shortage of memory.  dupmsg() may fail
7445 		 * if db_ref in any of the messages reaches its limit.
7446 		 */
7447 
7448 		if ((nbp = dupmsg(bp)) == NULL && (nbp = copymsg(bp)) == NULL) {
7449 			/*
7450 			 * Restore the state of the stream head since we
7451 			 * need to drop sd_lock (strwaitbuf is sleeping).
7452 			 */
7453 			size_t size = msgdsize(bp);
7454 
7455 			if ((mark & _LASTMARK) && (stp->sd_mark == NULL))
7456 				stp->sd_mark = bp;
7457 			bp->b_flag |= mark & ~_LASTMARK;
7458 			putback(stp, q, bp, pri);
7459 			mutex_exit(&stp->sd_lock);
7460 			error = strwaitbuf(size, BPRI_HI);
7461 			if (error) {
7462 				/*
7463 				 * There is no net change to the queue thus
7464 				 * no need to qbackenable.
7465 				 */
7466 				return (error);
7467 			}
7468 			goto retry;
7469 		}
7470 
7471 		if ((mark & _LASTMARK) && (stp->sd_mark == NULL))
7472 			stp->sd_mark = bp;
7473 		bp->b_flag |= mark & ~_LASTMARK;
7474 		putback(stp, q, bp, pri);
7475 		bp = nbp;
7476 	}
7477 
7478 	/*
7479 	 * Set this flag so strrput will not generate signals. Need to
7480 	 * make sure this flag is cleared before leaving this routine
7481 	 * else signals will stop being sent.
7482 	 */
7483 	stp->sd_flag |= STRGETINPROG;
7484 	mutex_exit(&stp->sd_lock);
7485 
7486 	if ((stp->sd_rputdatafunc != NULL) && (DB_TYPE(bp) == M_DATA)) {
7487 		mblk_t *tmp, *prevmp;
7488 
7489 		/*
7490 		 * Put first non-data mblk back to stream head and
7491 		 * cut the mblk chain so sd_rputdatafunc only sees
7492 		 * M_DATA mblks. We can skip the first mblk since it
7493 		 * is M_DATA according to the condition above.
7494 		 */
7495 		for (prevmp = bp, tmp = bp->b_cont; tmp != NULL;
7496 		    prevmp = tmp, tmp = tmp->b_cont) {
7497 			if (DB_TYPE(tmp) != M_DATA) {
7498 				prevmp->b_cont = NULL;
7499 				mutex_enter(&stp->sd_lock);
7500 				putback(stp, q, tmp, tmp->b_band);
7501 				mutex_exit(&stp->sd_lock);
7502 				break;
7503 			}
7504 		}
7505 
7506 		bp = (stp->sd_rputdatafunc)(stp->sd_vnode, bp,
7507 		    NULL, NULL, NULL, NULL);
7508 
7509 		if (bp == NULL)
7510 			goto retry;
7511 	}
7512 
7513 	if (STREAM_NEEDSERVICE(stp))
7514 		stream_runservice(stp);
7515 
7516 	/*
7517 	 * Set HIPRI flag if message is priority.
7518 	 */
7519 	if (type >= QPCTL)
7520 		flg = MSG_HIPRI;
7521 	else
7522 		flg = MSG_BAND;
7523 
7524 	/*
7525 	 * First process PROTO or PCPROTO blocks, if any.
7526 	 */
7527 	if (mctlp != NULL && type != M_DATA) {
7528 		mblk_t *nbp;
7529 
7530 		*mctlp = bp;
7531 		while (bp->b_cont && bp->b_cont->b_datap->db_type != M_DATA)
7532 			bp = bp->b_cont;
7533 		nbp = bp->b_cont;
7534 		bp->b_cont = NULL;
7535 		bp = nbp;
7536 	}
7537 
7538 	if (bp && bp->b_datap->db_type != M_DATA) {
7539 		/*
7540 		 * More PROTO blocks in msg. Will only happen if mctlp is NULL.
7541 		 */
7542 		more |= MORECTL;
7543 		savemp = bp;
7544 		while (bp && bp->b_datap->db_type != M_DATA) {
7545 			savemptail = bp;
7546 			bp = bp->b_cont;
7547 		}
7548 		savemptail->b_cont = NULL;
7549 	}
7550 
7551 	/*
7552 	 * Now process DATA blocks, if any.
7553 	 */
7554 	if (uiop == NULL) {
7555 		/* Append data to tail of mctlp */
7556 
7557 		if (mctlp != NULL) {
7558 			mblk_t **mpp = mctlp;
7559 
7560 			while (*mpp != NULL)
7561 				mpp = &((*mpp)->b_cont);
7562 			*mpp = bp;
7563 			bp = NULL;
7564 		}
7565 	} else if (uiop->uio_resid >= 0 && bp) {
7566 		size_t oldresid = uiop->uio_resid;
7567 
7568 		/*
7569 		 * If a streams message is likely to consist
7570 		 * of many small mblks, it is pulled up into
7571 		 * one continuous chunk of memory.
7572 		 * The size of the first mblk may be bogus because
7573 		 * successive read() calls on the socket reduce
7574 		 * the size of this mblk until it is exhausted
7575 		 * and then the code walks on to the next. Thus
7576 		 * the size of the mblk may not be the original size
7577 		 * that was passed up, it's simply a remainder
7578 		 * and hence can be very small without any
7579 		 * implication that the packet is badly fragmented.
7580 		 * So the size of the possible second mblk is
7581 		 * used to spot a badly fragmented packet.
7582 		 * see longer comment at top of page
7583 		 * by mblk_pull_len declaration.
7584 		 */
7585 
7586 		if (bp->b_cont != NULL && MBLKL(bp->b_cont) < mblk_pull_len) {
7587 			(void) pullupmsg(bp, -1);
7588 		}
7589 
7590 		bp = struiocopyout(bp, uiop, &error);
7591 		if (error != 0) {
7592 			if (mctlp != NULL) {
7593 				freemsg(*mctlp);
7594 				*mctlp = NULL;
7595 			} else
7596 				freemsg(savemp);
7597 			mutex_enter(&stp->sd_lock);
7598 			/*
7599 			 * clear stream head hi pri flag based on
7600 			 * first message
7601 			 */
7602 			if (!(flags & MSG_IPEEK) && (type >= QPCTL)) {
7603 				ASSERT(type == M_PCPROTO);
7604 				stp->sd_flag &= ~STRPRI;
7605 			}
7606 			more = 0;
7607 			goto getmout;
7608 		}
7609 		/*
7610 		 * (pr == 1) indicates a partial read.
7611 		 */
7612 		if (oldresid > uiop->uio_resid)
7613 			pr = 1;
7614 	}
7615 
7616 	if (bp) {			/* more data blocks in msg */
7617 		more |= MOREDATA;
7618 		if (savemp)
7619 			savemptail->b_cont = bp;
7620 		else
7621 			savemp = bp;
7622 	}
7623 
7624 	mutex_enter(&stp->sd_lock);
7625 	if (savemp) {
7626 		if (flags & (MSG_IPEEK|MSG_DISCARDTAIL)) {
7627 			/*
7628 			 * When MSG_DISCARDTAIL is set or
7629 			 * when peeking discard any tail. When peeking this
7630 			 * is the tail of the dup that was copied out - the
7631 			 * message has already been putback on the queue.
7632 			 * Return MOREDATA to the caller even though the data
7633 			 * is discarded. This is used by sockets (to
7634 			 * set MSG_TRUNC).
7635 			 */
7636 			freemsg(savemp);
7637 			if (!(flags & MSG_IPEEK) && (type >= QPCTL)) {
7638 				ASSERT(type == M_PCPROTO);
7639 				stp->sd_flag &= ~STRPRI;
7640 			}
7641 		} else if (pr && (savemp->b_datap->db_type == M_DATA) &&
7642 		    msgnodata(savemp)) {
7643 			/*
7644 			 * Avoid queuing a zero-length tail part of
7645 			 * a message. pr=1 indicates that we read some of
7646 			 * the message.
7647 			 */
7648 			freemsg(savemp);
7649 			more &= ~MOREDATA;
7650 			if (type >= QPCTL) {
7651 				ASSERT(type == M_PCPROTO);
7652 				stp->sd_flag &= ~STRPRI;
7653 			}
7654 		} else {
7655 			savemp->b_band = pri;
7656 			/*
7657 			 * If the first message was HIPRI and the one we're
7658 			 * putting back isn't, then clear STRPRI, otherwise
7659 			 * set STRPRI again.  Note that we must set STRPRI
7660 			 * again since the flush logic in strrput_nondata()
7661 			 * may have cleared it while we had sd_lock dropped.
7662 			 */
7663 
7664 			if (type >= QPCTL) {
7665 				ASSERT(type == M_PCPROTO);
7666 				if (queclass(savemp) < QPCTL)
7667 					stp->sd_flag &= ~STRPRI;
7668 				else
7669 					stp->sd_flag |= STRPRI;
7670 			} else if (queclass(savemp) >= QPCTL) {
7671 				/*
7672 				 * The first message was not a HIPRI message,
7673 				 * but the one we are about to putback is.
7674 				 * For simplicitly, we do not allow for HIPRI
7675 				 * messages to be embedded in the message
7676 				 * body, so just force it to same type as
7677 				 * first message.
7678 				 */
7679 				ASSERT(type == M_DATA || type == M_PROTO);
7680 				ASSERT(savemp->b_datap->db_type == M_PCPROTO);
7681 				savemp->b_datap->db_type = type;
7682 			}
7683 			if (mark != 0) {
7684 				if ((mark & _LASTMARK) &&
7685 				    (stp->sd_mark == NULL)) {
7686 					/*
7687 					 * If another marked message arrived
7688 					 * while sd_lock was not held sd_mark
7689 					 * would be non-NULL.
7690 					 */
7691 					stp->sd_mark = savemp;
7692 				}
7693 				savemp->b_flag |= mark & ~_LASTMARK;
7694 			}
7695 			putback(stp, q, savemp, pri);
7696 		}
7697 	} else if (!(flags & MSG_IPEEK)) {
7698 		/*
7699 		 * The complete message was consumed.
7700 		 *
7701 		 * If another M_PCPROTO arrived while sd_lock was not held
7702 		 * it would have been discarded since STRPRI was still set.
7703 		 *
7704 		 * Move the MSG*MARKNEXT information
7705 		 * to the stream head just in case
7706 		 * the read queue becomes empty.
7707 		 * clear stream head hi pri flag based on
7708 		 * first message
7709 		 *
7710 		 * If the stream head was at the mark
7711 		 * (STRATMARK) before we dropped sd_lock above
7712 		 * and some data was consumed then we have
7713 		 * moved past the mark thus STRATMARK is
7714 		 * cleared. However, if a message arrived in
7715 		 * strrput during the copyout above causing
7716 		 * STRATMARK to be set we can not clear that
7717 		 * flag.
7718 		 * XXX A "perimeter" would help by single-threading strrput,
7719 		 * strread, strgetmsg and kstrgetmsg.
7720 		 */
7721 		if (type >= QPCTL) {
7722 			ASSERT(type == M_PCPROTO);
7723 			stp->sd_flag &= ~STRPRI;
7724 		}
7725 		if (mark & (MSGMARKNEXT|MSGNOTMARKNEXT|MSGMARK)) {
7726 			if (mark & MSGMARKNEXT) {
7727 				stp->sd_flag &= ~STRNOTATMARK;
7728 				stp->sd_flag |= STRATMARK;
7729 			} else if (mark & MSGNOTMARKNEXT) {
7730 				stp->sd_flag &= ~STRATMARK;
7731 				stp->sd_flag |= STRNOTATMARK;
7732 			} else {
7733 				stp->sd_flag &= ~(STRATMARK|STRNOTATMARK);
7734 			}
7735 		} else if (pr && (old_sd_flag & STRATMARK)) {
7736 			stp->sd_flag &= ~STRATMARK;
7737 		}
7738 	}
7739 
7740 	*flagsp = flg;
7741 	*prip = pri;
7742 
7743 	/*
7744 	 * Getmsg cleanup processing - if the state of the queue has changed
7745 	 * some signals may need to be sent and/or poll awakened.
7746 	 */
7747 getmout:
7748 	qbackenable(q, pri);
7749 
7750 	/*
7751 	 * We dropped the stream head lock above. Send all M_SIG messages
7752 	 * before processing stream head for SIGPOLL messages.
7753 	 */
7754 	ASSERT(MUTEX_HELD(&stp->sd_lock));
7755 	while ((bp = q->q_first) != NULL &&
7756 	    (bp->b_datap->db_type == M_SIG)) {
7757 		/*
7758 		 * sd_lock is held so the content of the read queue can not
7759 		 * change.
7760 		 */
7761 		bp = getq(q);
7762 		ASSERT(bp != NULL && bp->b_datap->db_type == M_SIG);
7763 
7764 		strsignal_nolock(stp, *bp->b_rptr, bp->b_band);
7765 		mutex_exit(&stp->sd_lock);
7766 		freemsg(bp);
7767 		if (STREAM_NEEDSERVICE(stp))
7768 			stream_runservice(stp);
7769 		mutex_enter(&stp->sd_lock);
7770 	}
7771 
7772 	/*
7773 	 * stream head cannot change while we make the determination
7774 	 * whether or not to send a signal. Drop the flag to allow strrput
7775 	 * to send firstmsgsigs again.
7776 	 */
7777 	stp->sd_flag &= ~STRGETINPROG;
7778 
7779 	/*
7780 	 * If the type of message at the front of the queue changed
7781 	 * due to the receive the appropriate signals and pollwakeup events
7782 	 * are generated. The type of changes are:
7783 	 *	Processed a hipri message, q_first is not hipri.
7784 	 *	Processed a band X message, and q_first is band Y.
7785 	 * The generated signals and pollwakeups are identical to what
7786 	 * strrput() generates should the message that is now on q_first
7787 	 * arrive to an empty read queue.
7788 	 *
7789 	 * Note: only strrput will send a signal for a hipri message.
7790 	 */
7791 	if ((bp = q->q_first) != NULL && !(stp->sd_flag & STRPRI)) {
7792 		strsigset_t signals = 0;
7793 		strpollset_t pollwakeups = 0;
7794 
7795 		if (flg & MSG_HIPRI) {
7796 			/*
7797 			 * Removed a hipri message. Regular data at
7798 			 * the front of  the queue.
7799 			 */
7800 			if (bp->b_band == 0) {
7801 				signals = S_INPUT | S_RDNORM;
7802 				pollwakeups = POLLIN | POLLRDNORM;
7803 			} else {
7804 				signals = S_INPUT | S_RDBAND;
7805 				pollwakeups = POLLIN | POLLRDBAND;
7806 			}
7807 		} else if (pri != bp->b_band) {
7808 			/*
7809 			 * The band is different for the new q_first.
7810 			 */
7811 			if (bp->b_band == 0) {
7812 				signals = S_RDNORM;
7813 				pollwakeups = POLLIN | POLLRDNORM;
7814 			} else {
7815 				signals = S_RDBAND;
7816 				pollwakeups = POLLIN | POLLRDBAND;
7817 			}
7818 		}
7819 
7820 		if (pollwakeups != 0) {
7821 			if (pollwakeups == (POLLIN | POLLRDNORM)) {
7822 				if (!(stp->sd_rput_opt & SR_POLLIN))
7823 					goto no_pollwake;
7824 				stp->sd_rput_opt &= ~SR_POLLIN;
7825 			}
7826 			mutex_exit(&stp->sd_lock);
7827 			pollwakeup(&stp->sd_pollist, pollwakeups);
7828 			mutex_enter(&stp->sd_lock);
7829 		}
7830 no_pollwake:
7831 
7832 		if (stp->sd_sigflags & signals)
7833 			strsendsig(stp->sd_siglist, signals, bp->b_band, 0);
7834 	}
7835 	mutex_exit(&stp->sd_lock);
7836 
7837 	rvp->r_val1 = more;
7838 	return (error);
7839 #undef	_LASTMARK
7840 }
7841 
7842 /*
7843  * Put a message downstream.
7844  *
7845  * NOTE: strputmsg and kstrputmsg have much of the logic in common.
7846  */
7847 int
strputmsg(struct vnode * vp,struct strbuf * mctl,struct strbuf * mdata,unsigned char pri,int flag,int fmode)7848 strputmsg(
7849 	struct vnode *vp,
7850 	struct strbuf *mctl,
7851 	struct strbuf *mdata,
7852 	unsigned char pri,
7853 	int flag,
7854 	int fmode)
7855 {
7856 	struct stdata *stp;
7857 	queue_t *wqp;
7858 	mblk_t *mp;
7859 	ssize_t msgsize;
7860 	ssize_t rmin, rmax;
7861 	int error;
7862 	struct uio uios;
7863 	struct uio *uiop = &uios;
7864 	struct iovec iovs;
7865 	int xpg4 = 0;
7866 
7867 	ASSERT(vp->v_stream);
7868 	stp = vp->v_stream;
7869 	wqp = stp->sd_wrq;
7870 
7871 	/*
7872 	 * If it is an XPG4 application, we need to send
7873 	 * SIGPIPE below
7874 	 */
7875 
7876 	xpg4 = (flag & MSG_XPG4) ? 1 : 0;
7877 	flag &= ~MSG_XPG4;
7878 
7879 	if (AU_AUDITING())
7880 		audit_strputmsg(vp, mctl, mdata, pri, flag, fmode);
7881 
7882 	mutex_enter(&stp->sd_lock);
7883 
7884 	if ((error = i_straccess(stp, JCWRITE)) != 0) {
7885 		mutex_exit(&stp->sd_lock);
7886 		return (error);
7887 	}
7888 
7889 	if (stp->sd_flag & (STWRERR|STRHUP|STPLEX)) {
7890 		error = strwriteable(stp, B_FALSE, xpg4);
7891 		if (error != 0) {
7892 			mutex_exit(&stp->sd_lock);
7893 			return (error);
7894 		}
7895 	}
7896 
7897 	mutex_exit(&stp->sd_lock);
7898 
7899 	/*
7900 	 * Check for legal flag value.
7901 	 */
7902 	switch (flag) {
7903 	case MSG_HIPRI:
7904 		if ((mctl->len < 0) || (pri != 0))
7905 			return (EINVAL);
7906 		break;
7907 	case MSG_BAND:
7908 		break;
7909 
7910 	default:
7911 		return (EINVAL);
7912 	}
7913 
7914 	TRACE_1(TR_FAC_STREAMS_FR, TR_STRPUTMSG_IN,
7915 	    "strputmsg in:stp %p", stp);
7916 
7917 	/* get these values from those cached in the stream head */
7918 	rmin = stp->sd_qn_minpsz;
7919 	rmax = stp->sd_qn_maxpsz;
7920 
7921 	/*
7922 	 * Make sure ctl and data sizes together fall within the
7923 	 * limits of the max and min receive packet sizes and do
7924 	 * not exceed system limit.
7925 	 */
7926 	ASSERT((rmax >= 0) || (rmax == INFPSZ));
7927 	if (rmax == 0) {
7928 		return (ERANGE);
7929 	}
7930 	/*
7931 	 * Use the MAXIMUM of sd_maxblk and q_maxpsz.
7932 	 * Needed to prevent partial failures in the strmakedata loop.
7933 	 */
7934 	if (stp->sd_maxblk != INFPSZ && rmax != INFPSZ && rmax < stp->sd_maxblk)
7935 		rmax = stp->sd_maxblk;
7936 
7937 	if ((msgsize = mdata->len) < 0) {
7938 		msgsize = 0;
7939 		rmin = 0;	/* no range check for NULL data part */
7940 	}
7941 	if ((msgsize < rmin) ||
7942 	    ((msgsize > rmax) && (rmax != INFPSZ)) ||
7943 	    (mctl->len > strctlsz)) {
7944 		return (ERANGE);
7945 	}
7946 
7947 	/*
7948 	 * Setup uio and iov for data part
7949 	 */
7950 	iovs.iov_base = mdata->buf;
7951 	iovs.iov_len = msgsize;
7952 	uios.uio_iov = &iovs;
7953 	uios.uio_iovcnt = 1;
7954 	uios.uio_loffset = 0;
7955 	uios.uio_segflg = UIO_USERSPACE;
7956 	uios.uio_fmode = fmode;
7957 	uios.uio_extflg = UIO_COPY_DEFAULT;
7958 	uios.uio_resid = msgsize;
7959 	uios.uio_offset = 0;
7960 
7961 	/* Ignore flow control in strput for HIPRI */
7962 	if (flag & MSG_HIPRI)
7963 		flag |= MSG_IGNFLOW;
7964 
7965 	for (;;) {
7966 		int done = 0;
7967 
7968 		/*
7969 		 * strput will always free the ctl mblk - even when strput
7970 		 * fails.
7971 		 */
7972 		if ((error = strmakectl(mctl, flag, fmode, &mp)) != 0) {
7973 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRPUTMSG_OUT,
7974 			    "strputmsg out:stp %p out %d error %d",
7975 			    stp, 1, error);
7976 			return (error);
7977 		}
7978 		/*
7979 		 * Verify that the whole message can be transferred by
7980 		 * strput.
7981 		 */
7982 		ASSERT(stp->sd_maxblk == INFPSZ ||
7983 		    stp->sd_maxblk >= mdata->len);
7984 
7985 		msgsize = mdata->len;
7986 		error = strput(stp, mp, uiop, &msgsize, 0, pri, flag);
7987 		mdata->len = msgsize;
7988 
7989 		if (error == 0)
7990 			break;
7991 
7992 		if (error != EWOULDBLOCK)
7993 			goto out;
7994 
7995 		mutex_enter(&stp->sd_lock);
7996 		/*
7997 		 * Check for a missed wakeup.
7998 		 * Needed since strput did not hold sd_lock across
7999 		 * the canputnext.
8000 		 */
8001 		if (bcanputnext(wqp, pri)) {
8002 			/* Try again */
8003 			mutex_exit(&stp->sd_lock);
8004 			continue;
8005 		}
8006 		TRACE_2(TR_FAC_STREAMS_FR, TR_STRPUTMSG_WAIT,
8007 		    "strputmsg wait:stp %p waits pri %d", stp, pri);
8008 		if (((error = strwaitq(stp, WRITEWAIT, (ssize_t)0, fmode, -1,
8009 		    &done)) != 0) || done) {
8010 			mutex_exit(&stp->sd_lock);
8011 			TRACE_3(TR_FAC_STREAMS_FR, TR_STRPUTMSG_OUT,
8012 			    "strputmsg out:q %p out %d error %d",
8013 			    stp, 0, error);
8014 			return (error);
8015 		}
8016 		TRACE_1(TR_FAC_STREAMS_FR, TR_STRPUTMSG_WAKE,
8017 		    "strputmsg wake:stp %p wakes", stp);
8018 		if ((error = i_straccess(stp, JCWRITE)) != 0) {
8019 			mutex_exit(&stp->sd_lock);
8020 			return (error);
8021 		}
8022 		mutex_exit(&stp->sd_lock);
8023 	}
8024 out:
8025 	/*
8026 	 * For historic reasons, applications expect EAGAIN
8027 	 * when data mblk could not be allocated. so change
8028 	 * ENOMEM back to EAGAIN
8029 	 */
8030 	if (error == ENOMEM)
8031 		error = EAGAIN;
8032 	TRACE_3(TR_FAC_STREAMS_FR, TR_STRPUTMSG_OUT,
8033 	    "strputmsg out:stp %p out %d error %d", stp, 2, error);
8034 	return (error);
8035 }
8036 
8037 /*
8038  * Put a message downstream.
8039  * Can send only an M_PROTO/M_PCPROTO by passing in a NULL uiop.
8040  * The fmode flag (NDELAY, NONBLOCK) is the or of the flags in the uio
8041  * and the fmode parameter.
8042  *
8043  * This routine handles the consolidation private flags:
8044  *	MSG_IGNERROR	Ignore any stream head error except STPLEX.
8045  *	MSG_HOLDSIG	Hold signals while waiting for data.
8046  *	MSG_IGNFLOW	Don't check streams flow control.
8047  *
8048  * NOTE: strputmsg and kstrputmsg have much of the logic in common.
8049  */
8050 int
kstrputmsg(struct vnode * vp,mblk_t * mctl,struct uio * uiop,ssize_t msgsize,unsigned char pri,int flag,int fmode)8051 kstrputmsg(
8052 	struct vnode *vp,
8053 	mblk_t *mctl,
8054 	struct uio *uiop,
8055 	ssize_t msgsize,
8056 	unsigned char pri,
8057 	int flag,
8058 	int fmode)
8059 {
8060 	struct stdata *stp;
8061 	queue_t *wqp;
8062 	ssize_t rmin, rmax;
8063 	int error;
8064 
8065 	ASSERT(vp->v_stream);
8066 	stp = vp->v_stream;
8067 	wqp = stp->sd_wrq;
8068 	if (AU_AUDITING())
8069 		audit_strputmsg(vp, NULL, NULL, pri, flag, fmode);
8070 	if (mctl == NULL)
8071 		return (EINVAL);
8072 
8073 	mutex_enter(&stp->sd_lock);
8074 
8075 	if ((error = i_straccess(stp, JCWRITE)) != 0) {
8076 		mutex_exit(&stp->sd_lock);
8077 		freemsg(mctl);
8078 		return (error);
8079 	}
8080 
8081 	if ((stp->sd_flag & STPLEX) || !(flag & MSG_IGNERROR)) {
8082 		if (stp->sd_flag & (STWRERR|STRHUP|STPLEX)) {
8083 			error = strwriteable(stp, B_FALSE, B_TRUE);
8084 			if (error != 0) {
8085 				mutex_exit(&stp->sd_lock);
8086 				freemsg(mctl);
8087 				return (error);
8088 			}
8089 		}
8090 	}
8091 
8092 	mutex_exit(&stp->sd_lock);
8093 
8094 	/*
8095 	 * Check for legal flag value.
8096 	 */
8097 	switch (flag & (MSG_HIPRI|MSG_BAND|MSG_ANY)) {
8098 	case MSG_HIPRI:
8099 		if (pri != 0) {
8100 			freemsg(mctl);
8101 			return (EINVAL);
8102 		}
8103 		break;
8104 	case MSG_BAND:
8105 		break;
8106 	default:
8107 		freemsg(mctl);
8108 		return (EINVAL);
8109 	}
8110 
8111 	TRACE_1(TR_FAC_STREAMS_FR, TR_KSTRPUTMSG_IN,
8112 	    "kstrputmsg in:stp %p", stp);
8113 
8114 	/* get these values from those cached in the stream head */
8115 	rmin = stp->sd_qn_minpsz;
8116 	rmax = stp->sd_qn_maxpsz;
8117 
8118 	/*
8119 	 * Make sure ctl and data sizes together fall within the
8120 	 * limits of the max and min receive packet sizes and do
8121 	 * not exceed system limit.
8122 	 */
8123 	ASSERT((rmax >= 0) || (rmax == INFPSZ));
8124 	if (rmax == 0) {
8125 		freemsg(mctl);
8126 		return (ERANGE);
8127 	}
8128 	/*
8129 	 * Use the MAXIMUM of sd_maxblk and q_maxpsz.
8130 	 * Needed to prevent partial failures in the strmakedata loop.
8131 	 */
8132 	if (stp->sd_maxblk != INFPSZ && rmax != INFPSZ && rmax < stp->sd_maxblk)
8133 		rmax = stp->sd_maxblk;
8134 
8135 	if (uiop == NULL) {
8136 		msgsize = -1;
8137 		rmin = -1;	/* no range check for NULL data part */
8138 	} else {
8139 		/* Use uio flags as well as the fmode parameter flags */
8140 		fmode |= uiop->uio_fmode;
8141 
8142 		if ((msgsize < rmin) ||
8143 		    ((msgsize > rmax) && (rmax != INFPSZ))) {
8144 			freemsg(mctl);
8145 			return (ERANGE);
8146 		}
8147 	}
8148 
8149 	/* Ignore flow control in strput for HIPRI */
8150 	if (flag & MSG_HIPRI)
8151 		flag |= MSG_IGNFLOW;
8152 
8153 	for (;;) {
8154 		int done = 0;
8155 		int waitflag;
8156 		mblk_t *mp;
8157 
8158 		/*
8159 		 * strput will always free the ctl mblk - even when strput
8160 		 * fails. If MSG_IGNFLOW is set then any error returned
8161 		 * will cause us to break the loop, so we don't need a copy
8162 		 * of the message. If MSG_IGNFLOW is not set, then we can
8163 		 * get hit by flow control and be forced to try again. In
8164 		 * this case we need to have a copy of the message. We
8165 		 * do this using copymsg since the message may get modified
8166 		 * by something below us.
8167 		 *
8168 		 * We've observed that many TPI providers do not check db_ref
8169 		 * on the control messages but blindly reuse them for the
8170 		 * T_OK_ACK/T_ERROR_ACK. Thus using copymsg is more
8171 		 * friendly to such providers than using dupmsg. Also, note
8172 		 * that sockfs uses MSG_IGNFLOW for all TPI control messages.
8173 		 * Only data messages are subject to flow control, hence
8174 		 * subject to this copymsg.
8175 		 */
8176 		if (flag & MSG_IGNFLOW) {
8177 			mp = mctl;
8178 			mctl = NULL;
8179 		} else {
8180 			do {
8181 				/*
8182 				 * If a message has a free pointer, the message
8183 				 * must be dupmsg to maintain this pointer.
8184 				 * Code using this facility must be sure
8185 				 * that modules below will not change the
8186 				 * contents of the dblk without checking db_ref
8187 				 * first. If db_ref is > 1, then the module
8188 				 * needs to do a copymsg first. Otherwise,
8189 				 * the contents of the dblk may become
8190 				 * inconsistent because the freesmg/freeb below
8191 				 * may end up calling atomic_add_32_nv.
8192 				 * The atomic_add_32_nv in freeb (accessing
8193 				 * all of db_ref, db_type, db_flags, and
8194 				 * db_struioflag) does not prevent other threads
8195 				 * from concurrently trying to modify e.g.
8196 				 * db_type.
8197 				 */
8198 				if (mctl->b_datap->db_frtnp != NULL)
8199 					mp = dupmsg(mctl);
8200 				else
8201 					mp = copymsg(mctl);
8202 
8203 				if (mp != NULL)
8204 					break;
8205 
8206 				error = strwaitbuf(msgdsize(mctl), BPRI_MED);
8207 				if (error) {
8208 					freemsg(mctl);
8209 					return (error);
8210 				}
8211 			} while (mp == NULL);
8212 		}
8213 		/*
8214 		 * Verify that all of msgsize can be transferred by
8215 		 * strput.
8216 		 */
8217 		ASSERT(stp->sd_maxblk == INFPSZ || stp->sd_maxblk >= msgsize);
8218 		error = strput(stp, mp, uiop, &msgsize, 0, pri, flag);
8219 		if (error == 0)
8220 			break;
8221 
8222 		if (error != EWOULDBLOCK)
8223 			goto out;
8224 
8225 		/*
8226 		 * IF MSG_IGNFLOW is set we should have broken out of loop
8227 		 * above.
8228 		 */
8229 		ASSERT(!(flag & MSG_IGNFLOW));
8230 		mutex_enter(&stp->sd_lock);
8231 		/*
8232 		 * Check for a missed wakeup.
8233 		 * Needed since strput did not hold sd_lock across
8234 		 * the canputnext.
8235 		 */
8236 		if (bcanputnext(wqp, pri)) {
8237 			/* Try again */
8238 			mutex_exit(&stp->sd_lock);
8239 			continue;
8240 		}
8241 		TRACE_2(TR_FAC_STREAMS_FR, TR_KSTRPUTMSG_WAIT,
8242 		    "kstrputmsg wait:stp %p waits pri %d", stp, pri);
8243 
8244 		waitflag = WRITEWAIT;
8245 		if (flag & (MSG_HOLDSIG|MSG_IGNERROR)) {
8246 			if (flag & MSG_HOLDSIG)
8247 				waitflag |= STR_NOSIG;
8248 			if (flag & MSG_IGNERROR)
8249 				waitflag |= STR_NOERROR;
8250 		}
8251 		if (((error = strwaitq(stp, waitflag,
8252 		    (ssize_t)0, fmode, -1, &done)) != 0) || done) {
8253 			mutex_exit(&stp->sd_lock);
8254 			TRACE_3(TR_FAC_STREAMS_FR, TR_KSTRPUTMSG_OUT,
8255 			    "kstrputmsg out:stp %p out %d error %d",
8256 			    stp, 0, error);
8257 			freemsg(mctl);
8258 			return (error);
8259 		}
8260 		TRACE_1(TR_FAC_STREAMS_FR, TR_KSTRPUTMSG_WAKE,
8261 		    "kstrputmsg wake:stp %p wakes", stp);
8262 		if ((error = i_straccess(stp, JCWRITE)) != 0) {
8263 			mutex_exit(&stp->sd_lock);
8264 			freemsg(mctl);
8265 			return (error);
8266 		}
8267 		mutex_exit(&stp->sd_lock);
8268 	}
8269 out:
8270 	freemsg(mctl);
8271 	/*
8272 	 * For historic reasons, applications expect EAGAIN
8273 	 * when data mblk could not be allocated. so change
8274 	 * ENOMEM back to EAGAIN
8275 	 */
8276 	if (error == ENOMEM)
8277 		error = EAGAIN;
8278 	TRACE_3(TR_FAC_STREAMS_FR, TR_KSTRPUTMSG_OUT,
8279 	    "kstrputmsg out:stp %p out %d error %d", stp, 2, error);
8280 	return (error);
8281 }
8282 
8283 /*
8284  * Determines whether the necessary conditions are set on a stream
8285  * for it to be readable, writeable, or have exceptions.
8286  *
8287  * strpoll handles the consolidation private events:
8288  *	POLLNOERR	Do not return POLLERR even if there are stream
8289  *			head errors.
8290  *			Used by sockfs.
8291  *	POLLRDDATA	Do not return POLLIN unless at least one message on
8292  *			the queue contains one or more M_DATA mblks. Thus
8293  *			when this flag is set a queue with only
8294  *			M_PROTO/M_PCPROTO mblks does not return POLLIN.
8295  *			Used by sockfs to ignore T_EXDATA_IND messages.
8296  *
8297  * Note: POLLRDDATA assumes that synch streams only return messages with
8298  * an M_DATA attached (i.e. not messages consisting of only
8299  * an M_PROTO/M_PCPROTO part).
8300  */
8301 int
strpoll(struct stdata * stp,short events_arg,int anyyet,short * reventsp,struct pollhead ** phpp)8302 strpoll(struct stdata *stp, short events_arg, int anyyet, short *reventsp,
8303     struct pollhead **phpp)
8304 {
8305 	int events = (ushort_t)events_arg;
8306 	int retevents = 0;
8307 	mblk_t *mp;
8308 	qband_t *qbp;
8309 	long sd_flags = stp->sd_flag;
8310 	int headlocked = 0;
8311 
8312 	/*
8313 	 * For performance, a single 'if' tests for most possible edge
8314 	 * conditions in one shot
8315 	 */
8316 	if (sd_flags & (STPLEX | STRDERR | STWRERR)) {
8317 		if (sd_flags & STPLEX) {
8318 			*reventsp = POLLNVAL;
8319 			return (EINVAL);
8320 		}
8321 		if (((events & (POLLIN | POLLRDNORM | POLLRDBAND | POLLPRI)) &&
8322 		    (sd_flags & STRDERR)) ||
8323 		    ((events & (POLLOUT | POLLWRNORM | POLLWRBAND)) &&
8324 		    (sd_flags & STWRERR))) {
8325 			if (!(events & POLLNOERR)) {
8326 				*reventsp = POLLERR;
8327 				return (0);
8328 			}
8329 		}
8330 	}
8331 	if (sd_flags & STRHUP) {
8332 		retevents |= POLLHUP;
8333 	} else if (events & (POLLWRNORM | POLLWRBAND)) {
8334 		queue_t *tq;
8335 		queue_t	*qp = stp->sd_wrq;
8336 
8337 		claimstr(qp);
8338 		/* Find next module forward that has a service procedure */
8339 		tq = qp->q_next->q_nfsrv;
8340 		ASSERT(tq != NULL);
8341 
8342 		if (polllock(&stp->sd_pollist, QLOCK(tq)) != 0) {
8343 			releasestr(qp);
8344 			*reventsp = POLLNVAL;
8345 			return (0);
8346 		}
8347 		if (events & POLLWRNORM) {
8348 			queue_t *sqp;
8349 
8350 			if (tq->q_flag & QFULL)
8351 				/* ensure backq svc procedure runs */
8352 				tq->q_flag |= QWANTW;
8353 			else if ((sqp = stp->sd_struiowrq) != NULL) {
8354 				/* Check sync stream barrier write q */
8355 				mutex_exit(QLOCK(tq));
8356 				if (polllock(&stp->sd_pollist,
8357 				    QLOCK(sqp)) != 0) {
8358 					releasestr(qp);
8359 					*reventsp = POLLNVAL;
8360 					return (0);
8361 				}
8362 				if (sqp->q_flag & QFULL)
8363 					/* ensure pollwakeup() is done */
8364 					sqp->q_flag |= QWANTWSYNC;
8365 				else
8366 					retevents |= POLLOUT;
8367 				/* More write events to process ??? */
8368 				if (! (events & POLLWRBAND)) {
8369 					mutex_exit(QLOCK(sqp));
8370 					releasestr(qp);
8371 					goto chkrd;
8372 				}
8373 				mutex_exit(QLOCK(sqp));
8374 				if (polllock(&stp->sd_pollist,
8375 				    QLOCK(tq)) != 0) {
8376 					releasestr(qp);
8377 					*reventsp = POLLNVAL;
8378 					return (0);
8379 				}
8380 			} else
8381 				retevents |= POLLOUT;
8382 		}
8383 		if (events & POLLWRBAND) {
8384 			qbp = tq->q_bandp;
8385 			if (qbp) {
8386 				while (qbp) {
8387 					if (qbp->qb_flag & QB_FULL)
8388 						qbp->qb_flag |= QB_WANTW;
8389 					else
8390 						retevents |= POLLWRBAND;
8391 					qbp = qbp->qb_next;
8392 				}
8393 			} else {
8394 				retevents |= POLLWRBAND;
8395 			}
8396 		}
8397 		mutex_exit(QLOCK(tq));
8398 		releasestr(qp);
8399 	}
8400 chkrd:
8401 	if (sd_flags & STRPRI) {
8402 		retevents |= (events & POLLPRI);
8403 	} else if (events & (POLLRDNORM | POLLRDBAND | POLLIN)) {
8404 		queue_t	*qp = _RD(stp->sd_wrq);
8405 		int normevents = (events & (POLLIN | POLLRDNORM));
8406 
8407 		/*
8408 		 * Note: Need to do polllock() here since ps_lock may be
8409 		 * held. See bug 4191544.
8410 		 */
8411 		if (polllock(&stp->sd_pollist, &stp->sd_lock) != 0) {
8412 			*reventsp = POLLNVAL;
8413 			return (0);
8414 		}
8415 		headlocked = 1;
8416 		mp = qp->q_first;
8417 		while (mp) {
8418 			/*
8419 			 * For POLLRDDATA we scan b_cont and b_next until we
8420 			 * find an M_DATA.
8421 			 */
8422 			if ((events & POLLRDDATA) &&
8423 			    mp->b_datap->db_type != M_DATA) {
8424 				mblk_t *nmp = mp->b_cont;
8425 
8426 				while (nmp != NULL &&
8427 				    nmp->b_datap->db_type != M_DATA)
8428 					nmp = nmp->b_cont;
8429 				if (nmp == NULL) {
8430 					mp = mp->b_next;
8431 					continue;
8432 				}
8433 			}
8434 			if (mp->b_band == 0)
8435 				retevents |= normevents;
8436 			else
8437 				retevents |= (events & (POLLIN | POLLRDBAND));
8438 			break;
8439 		}
8440 		if (!(retevents & normevents) && (stp->sd_wakeq & RSLEEP)) {
8441 			/*
8442 			 * Sync stream barrier read queue has data.
8443 			 */
8444 			retevents |= normevents;
8445 		}
8446 		/* Treat eof as normal data */
8447 		if (sd_flags & STREOF)
8448 			retevents |= normevents;
8449 	}
8450 
8451 	/*
8452 	 * Pass back a pollhead if no events are pending or if edge-triggering
8453 	 * has been configured on this resource.
8454 	 */
8455 	if ((retevents == 0 && !anyyet) || (events & POLLET)) {
8456 		*phpp = &stp->sd_pollist;
8457 		if (headlocked == 0) {
8458 			if (polllock(&stp->sd_pollist, &stp->sd_lock) != 0) {
8459 				*reventsp = POLLNVAL;
8460 				return (0);
8461 			}
8462 			headlocked = 1;
8463 		}
8464 		stp->sd_rput_opt |= SR_POLLIN;
8465 	}
8466 
8467 	*reventsp = (short)retevents;
8468 	if (headlocked)
8469 		mutex_exit(&stp->sd_lock);
8470 	return (0);
8471 }
8472 
8473 /*
8474  * The purpose of putback() is to assure sleeping polls/reads
8475  * are awakened when there are no new messages arriving at the,
8476  * stream head, and a message is placed back on the read queue.
8477  *
8478  * sd_lock must be held when messages are placed back on stream
8479  * head.  (getq() holds sd_lock when it removes messages from
8480  * the queue)
8481  */
8482 
8483 static void
putback(struct stdata * stp,queue_t * q,mblk_t * bp,int band)8484 putback(struct stdata *stp, queue_t *q, mblk_t *bp, int band)
8485 {
8486 	mblk_t	*qfirst;
8487 	ASSERT(MUTEX_HELD(&stp->sd_lock));
8488 
8489 	/*
8490 	 * As a result of lock-step ordering around q_lock and sd_lock,
8491 	 * it's possible for function calls like putnext() and
8492 	 * canputnext() to get an inaccurate picture of how much
8493 	 * data is really being processed at the stream head.
8494 	 * We only consolidate with existing messages on the queue
8495 	 * if the length of the message we want to put back is smaller
8496 	 * than the queue hiwater mark.
8497 	 */
8498 	if ((stp->sd_rput_opt & SR_CONSOL_DATA) &&
8499 	    (DB_TYPE(bp) == M_DATA) && ((qfirst = q->q_first) != NULL) &&
8500 	    (DB_TYPE(qfirst) == M_DATA) &&
8501 	    ((qfirst->b_flag & (MSGMARK|MSGDELIM)) == 0) &&
8502 	    ((bp->b_flag & (MSGMARK|MSGDELIM|MSGMARKNEXT)) == 0) &&
8503 	    (mp_cont_len(bp, NULL) < q->q_hiwat)) {
8504 		/*
8505 		 * We use the same logic as defined in strrput()
8506 		 * but in reverse as we are putting back onto the
8507 		 * queue and want to retain byte ordering.
8508 		 * Consolidate M_DATA messages with M_DATA ONLY.
8509 		 * strrput() allows the consolidation of M_DATA onto
8510 		 * M_PROTO | M_PCPROTO but not the other way round.
8511 		 *
8512 		 * The consolidation does not take place if the message
8513 		 * we are returning to the queue is marked with either
8514 		 * of the marks or the delim flag or if q_first
8515 		 * is marked with MSGMARK. The MSGMARK check is needed to
8516 		 * handle the odd semantics of MSGMARK where essentially
8517 		 * the whole message is to be treated as marked.
8518 		 * Carry any MSGMARKNEXT and MSGNOTMARKNEXT from q_first
8519 		 * to the front of the b_cont chain.
8520 		 */
8521 		rmvq_noenab(q, qfirst);
8522 
8523 		/*
8524 		 * The first message in the b_cont list
8525 		 * tracks MSGMARKNEXT and MSGNOTMARKNEXT.
8526 		 * We need to handle the case where we
8527 		 * are appending:
8528 		 *
8529 		 * 1) a MSGMARKNEXT to a MSGNOTMARKNEXT.
8530 		 * 2) a MSGMARKNEXT to a plain message.
8531 		 * 3) a MSGNOTMARKNEXT to a plain message
8532 		 * 4) a MSGNOTMARKNEXT to a MSGNOTMARKNEXT
8533 		 *    message.
8534 		 *
8535 		 * Thus we never append a MSGMARKNEXT or
8536 		 * MSGNOTMARKNEXT to a MSGMARKNEXT message.
8537 		 */
8538 		if (qfirst->b_flag & MSGMARKNEXT) {
8539 			bp->b_flag |= MSGMARKNEXT;
8540 			bp->b_flag &= ~MSGNOTMARKNEXT;
8541 			qfirst->b_flag &= ~MSGMARKNEXT;
8542 		} else if (qfirst->b_flag & MSGNOTMARKNEXT) {
8543 			bp->b_flag |= MSGNOTMARKNEXT;
8544 			qfirst->b_flag &= ~MSGNOTMARKNEXT;
8545 		}
8546 
8547 		linkb(bp, qfirst);
8548 	}
8549 	(void) putbq(q, bp);
8550 
8551 	/*
8552 	 * A message may have come in when the sd_lock was dropped in the
8553 	 * calling routine. If this is the case and STR*ATMARK info was
8554 	 * received, need to move that from the stream head to the q_last
8555 	 * so that SIOCATMARK can return the proper value.
8556 	 */
8557 	if (stp->sd_flag & (STRATMARK | STRNOTATMARK)) {
8558 		unsigned short *flagp = &q->q_last->b_flag;
8559 		uint_t b_flag = (uint_t)*flagp;
8560 
8561 		if (stp->sd_flag & STRATMARK) {
8562 			b_flag &= ~MSGNOTMARKNEXT;
8563 			b_flag |= MSGMARKNEXT;
8564 			stp->sd_flag &= ~STRATMARK;
8565 		} else {
8566 			b_flag &= ~MSGMARKNEXT;
8567 			b_flag |= MSGNOTMARKNEXT;
8568 			stp->sd_flag &= ~STRNOTATMARK;
8569 		}
8570 		*flagp = (unsigned short) b_flag;
8571 	}
8572 
8573 #ifdef	DEBUG
8574 	/*
8575 	 * Make sure that the flags are not messed up.
8576 	 */
8577 	{
8578 		mblk_t *mp;
8579 		mp = q->q_last;
8580 		while (mp != NULL) {
8581 			ASSERT((mp->b_flag & (MSGMARKNEXT|MSGNOTMARKNEXT)) !=
8582 			    (MSGMARKNEXT|MSGNOTMARKNEXT));
8583 			mp = mp->b_cont;
8584 		}
8585 	}
8586 #endif
8587 	if (q->q_first == bp) {
8588 		short pollevents;
8589 
8590 		if (stp->sd_flag & RSLEEP) {
8591 			stp->sd_flag &= ~RSLEEP;
8592 			cv_broadcast(&q->q_wait);
8593 		}
8594 		if (stp->sd_flag & STRPRI) {
8595 			pollevents = POLLPRI;
8596 		} else {
8597 			if (band == 0) {
8598 				if (!(stp->sd_rput_opt & SR_POLLIN))
8599 					return;
8600 				stp->sd_rput_opt &= ~SR_POLLIN;
8601 				pollevents = POLLIN | POLLRDNORM;
8602 			} else {
8603 				pollevents = POLLIN | POLLRDBAND;
8604 			}
8605 		}
8606 		mutex_exit(&stp->sd_lock);
8607 		pollwakeup(&stp->sd_pollist, pollevents);
8608 		mutex_enter(&stp->sd_lock);
8609 	}
8610 }
8611 
8612 /*
8613  * Return the held vnode attached to the stream head of a
8614  * given queue
8615  * It is the responsibility of the calling routine to ensure
8616  * that the queue does not go away (e.g. pop).
8617  */
8618 vnode_t *
strq2vp(queue_t * qp)8619 strq2vp(queue_t *qp)
8620 {
8621 	vnode_t *vp;
8622 	vp = STREAM(qp)->sd_vnode;
8623 	ASSERT(vp != NULL);
8624 	VN_HOLD(vp);
8625 	return (vp);
8626 }
8627 
8628 /*
8629  * return the stream head write queue for the given vp
8630  * It is the responsibility of the calling routine to ensure
8631  * that the stream or vnode do not close.
8632  */
8633 queue_t *
strvp2wq(vnode_t * vp)8634 strvp2wq(vnode_t *vp)
8635 {
8636 	ASSERT(vp->v_stream != NULL);
8637 	return (vp->v_stream->sd_wrq);
8638 }
8639 
8640 /*
8641  * pollwakeup stream head
8642  * It is the responsibility of the calling routine to ensure
8643  * that the stream or vnode do not close.
8644  */
8645 void
strpollwakeup(vnode_t * vp,short event)8646 strpollwakeup(vnode_t *vp, short event)
8647 {
8648 	ASSERT(vp->v_stream);
8649 	pollwakeup(&vp->v_stream->sd_pollist, event);
8650 }
8651 
8652 /*
8653  * Mate the stream heads of two vnodes together. If the two vnodes are the
8654  * same, we just make the write-side point at the read-side -- otherwise,
8655  * we do a full mate.  Only works on vnodes associated with streams that are
8656  * still being built and thus have only a stream head.
8657  */
8658 void
strmate(vnode_t * vp1,vnode_t * vp2)8659 strmate(vnode_t *vp1, vnode_t *vp2)
8660 {
8661 	queue_t *wrq1 = strvp2wq(vp1);
8662 	queue_t *wrq2 = strvp2wq(vp2);
8663 
8664 	/*
8665 	 * Verify that there are no modules on the stream yet.  We also
8666 	 * rely on the stream head always having a service procedure to
8667 	 * avoid tweaking q_nfsrv.
8668 	 */
8669 	ASSERT(wrq1->q_next == NULL && wrq2->q_next == NULL);
8670 	ASSERT(wrq1->q_qinfo->qi_srvp != NULL);
8671 	ASSERT(wrq2->q_qinfo->qi_srvp != NULL);
8672 
8673 	/*
8674 	 * If the queues are the same, just twist; otherwise do a full mate.
8675 	 */
8676 	if (wrq1 == wrq2) {
8677 		wrq1->q_next = _RD(wrq1);
8678 	} else {
8679 		wrq1->q_next = _RD(wrq2);
8680 		wrq2->q_next = _RD(wrq1);
8681 		STREAM(wrq1)->sd_mate = STREAM(wrq2);
8682 		STREAM(wrq1)->sd_flag |= STRMATE;
8683 		STREAM(wrq2)->sd_mate = STREAM(wrq1);
8684 		STREAM(wrq2)->sd_flag |= STRMATE;
8685 	}
8686 }
8687 
8688 /*
8689  * XXX will go away when console is correctly fixed.
8690  * Clean up the console PIDS, from previous I_SETSIG,
8691  * called only for cnopen which never calls strclean().
8692  */
8693 void
str_cn_clean(struct vnode * vp)8694 str_cn_clean(struct vnode *vp)
8695 {
8696 	strsig_t *ssp, *pssp, *tssp;
8697 	struct stdata *stp;
8698 	struct pid  *pidp;
8699 	int update = 0;
8700 
8701 	ASSERT(vp->v_stream);
8702 	stp = vp->v_stream;
8703 	pssp = NULL;
8704 	mutex_enter(&stp->sd_lock);
8705 	ssp = stp->sd_siglist;
8706 	while (ssp) {
8707 		mutex_enter(&pidlock);
8708 		pidp = ssp->ss_pidp;
8709 		/*
8710 		 * Get rid of PID if the proc is gone.
8711 		 */
8712 		if (pidp->pid_prinactive) {
8713 			tssp = ssp->ss_next;
8714 			if (pssp)
8715 				pssp->ss_next = tssp;
8716 			else
8717 				stp->sd_siglist = tssp;
8718 			ASSERT(pidp->pid_ref <= 1);
8719 			PID_RELE(ssp->ss_pidp);
8720 			mutex_exit(&pidlock);
8721 			kmem_free(ssp, sizeof (strsig_t));
8722 			update = 1;
8723 			ssp = tssp;
8724 			continue;
8725 		} else
8726 			mutex_exit(&pidlock);
8727 		pssp = ssp;
8728 		ssp = ssp->ss_next;
8729 	}
8730 	if (update) {
8731 		stp->sd_sigflags = 0;
8732 		for (ssp = stp->sd_siglist; ssp; ssp = ssp->ss_next)
8733 			stp->sd_sigflags |= ssp->ss_events;
8734 	}
8735 	mutex_exit(&stp->sd_lock);
8736 }
8737 
8738 /*
8739  * Return B_TRUE if there is data in the message, B_FALSE otherwise.
8740  */
8741 static boolean_t
msghasdata(mblk_t * bp)8742 msghasdata(mblk_t *bp)
8743 {
8744 	for (; bp; bp = bp->b_cont)
8745 		if (bp->b_datap->db_type == M_DATA) {
8746 			ASSERT(bp->b_wptr >= bp->b_rptr);
8747 			if (bp->b_wptr > bp->b_rptr)
8748 				return (B_TRUE);
8749 		}
8750 	return (B_FALSE);
8751 }
8752