1 // SPDX-License-Identifier: GPL-2.0-only
2 /*******************************************************************************
3 This contains the functions to handle the platform driver.
4
5 Copyright (C) 2007-2011 STMicroelectronics Ltd
6
7
8 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
9 *******************************************************************************/
10
11 #include <linux/device.h>
12 #include <linux/platform_device.h>
13 #include <linux/pm_runtime.h>
14 #include <linux/module.h>
15 #include <linux/io.h>
16 #include <linux/of.h>
17 #include <linux/of_net.h>
18 #include <linux/of_mdio.h>
19
20 #include "stmmac.h"
21 #include "stmmac_platform.h"
22
23 #ifdef CONFIG_OF
24
25 /**
26 * dwmac1000_validate_mcast_bins - validates the number of Multicast filter bins
27 * @dev: struct device of the platform device
28 * @mcast_bins: Multicast filtering bins
29 * Description:
30 * this function validates the number of Multicast filtering bins specified
31 * by the configuration through the device tree. The Synopsys GMAC supports
32 * 64 bins, 128 bins, or 256 bins. "bins" refer to the division of CRC
33 * number space. 64 bins correspond to 6 bits of the CRC, 128 corresponds
34 * to 7 bits, and 256 refers to 8 bits of the CRC. Any other setting is
35 * invalid and will cause the filtering algorithm to use Multicast
36 * promiscuous mode.
37 */
dwmac1000_validate_mcast_bins(struct device * dev,int mcast_bins)38 static int dwmac1000_validate_mcast_bins(struct device *dev, int mcast_bins)
39 {
40 int x = mcast_bins;
41
42 switch (x) {
43 case HASH_TABLE_SIZE:
44 case 128:
45 case 256:
46 break;
47 default:
48 x = 0;
49 dev_info(dev, "Hash table entries set to unexpected value %d\n",
50 mcast_bins);
51 break;
52 }
53 return x;
54 }
55
56 /**
57 * dwmac1000_validate_ucast_entries - validate the Unicast address entries
58 * @dev: struct device of the platform device
59 * @ucast_entries: number of Unicast address entries
60 * Description:
61 * This function validates the number of Unicast address entries supported
62 * by a particular Synopsys 10/100/1000 controller. The Synopsys controller
63 * supports 1..32, 64, or 128 Unicast filter entries for it's Unicast filter
64 * logic. This function validates a valid, supported configuration is
65 * selected, and defaults to 1 Unicast address if an unsupported
66 * configuration is selected.
67 */
dwmac1000_validate_ucast_entries(struct device * dev,int ucast_entries)68 static int dwmac1000_validate_ucast_entries(struct device *dev,
69 int ucast_entries)
70 {
71 int x = ucast_entries;
72
73 switch (x) {
74 case 1 ... 32:
75 case 64:
76 case 128:
77 break;
78 default:
79 x = 1;
80 dev_info(dev, "Unicast table entries set to unexpected value %d\n",
81 ucast_entries);
82 break;
83 }
84 return x;
85 }
86
87 /**
88 * stmmac_axi_setup - parse DT parameters for programming the AXI register
89 * @pdev: platform device
90 * Description:
91 * if required, from device-tree the AXI internal register can be tuned
92 * by using platform parameters.
93 */
stmmac_axi_setup(struct platform_device * pdev)94 static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
95 {
96 struct device_node *np;
97 struct stmmac_axi *axi;
98
99 np = of_parse_phandle(pdev->dev.of_node, "snps,axi-config", 0);
100 if (!np)
101 return NULL;
102
103 axi = devm_kzalloc(&pdev->dev, sizeof(*axi), GFP_KERNEL);
104 if (!axi) {
105 of_node_put(np);
106 return ERR_PTR(-ENOMEM);
107 }
108
109 axi->axi_lpi_en = of_property_read_bool(np, "snps,lpi_en");
110 axi->axi_xit_frm = of_property_read_bool(np, "snps,xit_frm");
111 axi->axi_kbbe = of_property_read_bool(np, "snps,kbbe");
112 axi->axi_fb = of_property_read_bool(np, "snps,fb");
113 axi->axi_mb = of_property_read_bool(np, "snps,mb");
114 axi->axi_rb = of_property_read_bool(np, "snps,rb");
115
116 if (of_property_read_u32(np, "snps,wr_osr_lmt", &axi->axi_wr_osr_lmt))
117 axi->axi_wr_osr_lmt = 1;
118 if (of_property_read_u32(np, "snps,rd_osr_lmt", &axi->axi_rd_osr_lmt))
119 axi->axi_rd_osr_lmt = 1;
120 of_property_read_u32_array(np, "snps,blen", axi->axi_blen, AXI_BLEN);
121 of_node_put(np);
122
123 return axi;
124 }
125
126 /**
127 * stmmac_mtl_setup - parse DT parameters for multiple queues configuration
128 * @pdev: platform device
129 * @plat: enet data
130 */
stmmac_mtl_setup(struct platform_device * pdev,struct plat_stmmacenet_data * plat)131 static int stmmac_mtl_setup(struct platform_device *pdev,
132 struct plat_stmmacenet_data *plat)
133 {
134 struct device_node *q_node;
135 struct device_node *rx_node;
136 struct device_node *tx_node;
137 u8 queue = 0;
138 int ret = 0;
139
140 /* For backwards-compatibility with device trees that don't have any
141 * snps,mtl-rx-config or snps,mtl-tx-config properties, we fall back
142 * to one RX and TX queues each.
143 */
144 plat->rx_queues_to_use = 1;
145 plat->tx_queues_to_use = 1;
146
147 /* First Queue must always be in DCB mode. As MTL_QUEUE_DCB = 1 we need
148 * to always set this, otherwise Queue will be classified as AVB
149 * (because MTL_QUEUE_AVB = 0).
150 */
151 plat->rx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
152 plat->tx_queues_cfg[0].mode_to_use = MTL_QUEUE_DCB;
153
154 rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0);
155 if (!rx_node)
156 return ret;
157
158 tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0);
159 if (!tx_node) {
160 of_node_put(rx_node);
161 return ret;
162 }
163
164 /* Processing RX queues common config */
165 if (of_property_read_u32(rx_node, "snps,rx-queues-to-use",
166 &plat->rx_queues_to_use))
167 plat->rx_queues_to_use = 1;
168
169 if (of_property_read_bool(rx_node, "snps,rx-sched-sp"))
170 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
171 else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp"))
172 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP;
173 else
174 plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
175
176 /* Processing individual RX queue config */
177 for_each_child_of_node(rx_node, q_node) {
178 if (queue >= plat->rx_queues_to_use)
179 break;
180
181 if (of_property_read_bool(q_node, "snps,dcb-algorithm"))
182 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
183 else if (of_property_read_bool(q_node, "snps,avb-algorithm"))
184 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
185 else
186 plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
187
188 if (of_property_read_u32(q_node, "snps,map-to-dma-channel",
189 &plat->rx_queues_cfg[queue].chan))
190 plat->rx_queues_cfg[queue].chan = queue;
191 /* TODO: Dynamic mapping to be included in the future */
192
193 if (of_property_read_u32(q_node, "snps,priority",
194 &plat->rx_queues_cfg[queue].prio)) {
195 plat->rx_queues_cfg[queue].prio = 0;
196 plat->rx_queues_cfg[queue].use_prio = false;
197 } else {
198 plat->rx_queues_cfg[queue].use_prio = true;
199 }
200
201 /* RX queue specific packet type routing */
202 if (of_property_read_bool(q_node, "snps,route-avcp"))
203 plat->rx_queues_cfg[queue].pkt_route = PACKET_AVCPQ;
204 else if (of_property_read_bool(q_node, "snps,route-ptp"))
205 plat->rx_queues_cfg[queue].pkt_route = PACKET_PTPQ;
206 else if (of_property_read_bool(q_node, "snps,route-dcbcp"))
207 plat->rx_queues_cfg[queue].pkt_route = PACKET_DCBCPQ;
208 else if (of_property_read_bool(q_node, "snps,route-up"))
209 plat->rx_queues_cfg[queue].pkt_route = PACKET_UPQ;
210 else if (of_property_read_bool(q_node, "snps,route-multi-broad"))
211 plat->rx_queues_cfg[queue].pkt_route = PACKET_MCBCQ;
212 else
213 plat->rx_queues_cfg[queue].pkt_route = 0x0;
214
215 queue++;
216 }
217 if (queue != plat->rx_queues_to_use) {
218 ret = -EINVAL;
219 dev_err(&pdev->dev, "Not all RX queues were configured\n");
220 goto out;
221 }
222
223 /* Processing TX queues common config */
224 if (of_property_read_u32(tx_node, "snps,tx-queues-to-use",
225 &plat->tx_queues_to_use))
226 plat->tx_queues_to_use = 1;
227
228 if (of_property_read_bool(tx_node, "snps,tx-sched-wrr"))
229 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
230 else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq"))
231 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ;
232 else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr"))
233 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR;
234 else
235 plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP;
236
237 queue = 0;
238
239 /* Processing individual TX queue config */
240 for_each_child_of_node(tx_node, q_node) {
241 if (queue >= plat->tx_queues_to_use)
242 break;
243
244 if (of_property_read_u32(q_node, "snps,weight",
245 &plat->tx_queues_cfg[queue].weight))
246 plat->tx_queues_cfg[queue].weight = 0x10 + queue;
247
248 if (of_property_read_bool(q_node, "snps,dcb-algorithm")) {
249 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
250 } else if (of_property_read_bool(q_node,
251 "snps,avb-algorithm")) {
252 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB;
253
254 /* Credit Base Shaper parameters used by AVB */
255 if (of_property_read_u32(q_node, "snps,send_slope",
256 &plat->tx_queues_cfg[queue].send_slope))
257 plat->tx_queues_cfg[queue].send_slope = 0x0;
258 if (of_property_read_u32(q_node, "snps,idle_slope",
259 &plat->tx_queues_cfg[queue].idle_slope))
260 plat->tx_queues_cfg[queue].idle_slope = 0x0;
261 if (of_property_read_u32(q_node, "snps,high_credit",
262 &plat->tx_queues_cfg[queue].high_credit))
263 plat->tx_queues_cfg[queue].high_credit = 0x0;
264 if (of_property_read_u32(q_node, "snps,low_credit",
265 &plat->tx_queues_cfg[queue].low_credit))
266 plat->tx_queues_cfg[queue].low_credit = 0x0;
267 } else {
268 plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB;
269 }
270
271 if (of_property_read_u32(q_node, "snps,priority",
272 &plat->tx_queues_cfg[queue].prio)) {
273 plat->tx_queues_cfg[queue].prio = 0;
274 plat->tx_queues_cfg[queue].use_prio = false;
275 } else {
276 plat->tx_queues_cfg[queue].use_prio = true;
277 }
278
279 plat->tx_queues_cfg[queue].coe_unsupported =
280 of_property_read_bool(q_node, "snps,coe-unsupported");
281
282 queue++;
283 }
284 if (queue != plat->tx_queues_to_use) {
285 ret = -EINVAL;
286 dev_err(&pdev->dev, "Not all TX queues were configured\n");
287 goto out;
288 }
289
290 out:
291 of_node_put(rx_node);
292 of_node_put(tx_node);
293 of_node_put(q_node);
294
295 return ret;
296 }
297
298 /**
299 * stmmac_of_get_mdio() - Gets the MDIO bus from the devicetree.
300 * @np: devicetree node
301 *
302 * The MDIO bus will be searched for in the following ways:
303 * 1. The compatible is "snps,dwc-qos-ethernet-4.10" && a "mdio" named
304 * child node exists
305 * 2. A child node with the "snps,dwmac-mdio" compatible is present
306 *
307 * Return: The MDIO node if present otherwise NULL
308 */
stmmac_of_get_mdio(struct device_node * np)309 static struct device_node *stmmac_of_get_mdio(struct device_node *np)
310 {
311 static const struct of_device_id need_mdio_ids[] = {
312 { .compatible = "snps,dwc-qos-ethernet-4.10" },
313 {},
314 };
315 struct device_node *mdio_node = NULL;
316
317 if (of_match_node(need_mdio_ids, np)) {
318 mdio_node = of_get_child_by_name(np, "mdio");
319 } else {
320 /**
321 * If snps,dwmac-mdio is passed from DT, always register
322 * the MDIO
323 */
324 for_each_child_of_node(np, mdio_node) {
325 if (of_device_is_compatible(mdio_node,
326 "snps,dwmac-mdio"))
327 break;
328 }
329 }
330
331 return mdio_node;
332 }
333
334 /**
335 * stmmac_mdio_setup() - Populate platform related MDIO structures.
336 * @plat: driver data platform structure
337 * @np: devicetree node
338 * @dev: device pointer
339 *
340 * This searches for MDIO information from the devicetree.
341 * If an MDIO node is found, it's assigned to plat->mdio_node and
342 * plat->mdio_bus_data is allocated.
343 * If no connection can be determined, just plat->mdio_bus_data is allocated
344 * to indicate a bus should be created and scanned for a phy.
345 * If it's determined there's no MDIO bus needed, both are left NULL.
346 *
347 * This expects that plat->phy_node has already been searched for.
348 *
349 * Return: 0 on success, errno otherwise.
350 */
stmmac_mdio_setup(struct plat_stmmacenet_data * plat,struct device_node * np,struct device * dev)351 static int stmmac_mdio_setup(struct plat_stmmacenet_data *plat,
352 struct device_node *np, struct device *dev)
353 {
354 bool legacy_mdio;
355
356 plat->mdio_node = stmmac_of_get_mdio(np);
357 if (plat->mdio_node)
358 dev_dbg(dev, "Found MDIO subnode\n");
359
360 /* Legacy devicetrees allowed for no MDIO bus description and expect
361 * the bus to be scanned for devices. If there's no phy or fixed-link
362 * described assume this is the case since there must be something
363 * connected to the MAC.
364 */
365 legacy_mdio = !of_phy_is_fixed_link(np) && !plat->phy_node;
366 if (legacy_mdio)
367 dev_info(dev, "Deprecated MDIO bus assumption used\n");
368
369 if (plat->mdio_node || legacy_mdio) {
370 plat->mdio_bus_data = devm_kzalloc(dev,
371 sizeof(*plat->mdio_bus_data),
372 GFP_KERNEL);
373 if (!plat->mdio_bus_data)
374 return -ENOMEM;
375
376 plat->mdio_bus_data->needs_reset = true;
377 }
378
379 return 0;
380 }
381
382 /**
383 * stmmac_of_get_mac_mode - retrieves the interface of the MAC
384 * @np: - device-tree node
385 * Description:
386 * Similar to `of_get_phy_mode()`, this function will retrieve (from
387 * the device-tree) the interface mode on the MAC side. This assumes
388 * that there is mode converter in-between the MAC & PHY
389 * (e.g. GMII-to-RGMII).
390 */
stmmac_of_get_mac_mode(struct device_node * np)391 static int stmmac_of_get_mac_mode(struct device_node *np)
392 {
393 const char *pm;
394 int err, i;
395
396 err = of_property_read_string(np, "mac-mode", &pm);
397 if (err < 0)
398 return err;
399
400 for (i = 0; i < PHY_INTERFACE_MODE_MAX; i++) {
401 if (!strcasecmp(pm, phy_modes(i)))
402 return i;
403 }
404
405 return -ENODEV;
406 }
407
408 /**
409 * stmmac_remove_config_dt - undo the effects of stmmac_probe_config_dt()
410 * @pdev: platform_device structure
411 * @plat: driver data platform structure
412 *
413 * Release resources claimed by stmmac_probe_config_dt().
414 */
stmmac_remove_config_dt(struct platform_device * pdev,struct plat_stmmacenet_data * plat)415 static void stmmac_remove_config_dt(struct platform_device *pdev,
416 struct plat_stmmacenet_data *plat)
417 {
418 clk_disable_unprepare(plat->stmmac_clk);
419 clk_disable_unprepare(plat->pclk);
420 of_node_put(plat->phy_node);
421 of_node_put(plat->mdio_node);
422 }
423
424 /**
425 * stmmac_probe_config_dt - parse device-tree driver parameters
426 * @pdev: platform_device structure
427 * @mac: MAC address to use
428 * Description:
429 * this function is to read the driver parameters from device-tree and
430 * set some private fields that will be used by the main at runtime.
431 */
432 static struct plat_stmmacenet_data *
stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)433 stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
434 {
435 struct device_node *np = pdev->dev.of_node;
436 struct plat_stmmacenet_data *plat;
437 struct stmmac_dma_cfg *dma_cfg;
438 int phy_mode;
439 void *ret;
440 int rc;
441
442 plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
443 if (!plat)
444 return ERR_PTR(-ENOMEM);
445
446 rc = of_get_mac_address(np, mac);
447 if (rc) {
448 if (rc == -EPROBE_DEFER)
449 return ERR_PTR(rc);
450
451 eth_zero_addr(mac);
452 }
453
454 phy_mode = device_get_phy_mode(&pdev->dev);
455 if (phy_mode < 0)
456 return ERR_PTR(phy_mode);
457
458 plat->phy_interface = phy_mode;
459 rc = stmmac_of_get_mac_mode(np);
460 plat->mac_interface = rc < 0 ? plat->phy_interface : rc;
461
462 /* Some wrapper drivers still rely on phy_node. Let's save it while
463 * they are not converted to phylink. */
464 plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
465
466 /* PHYLINK automatically parses the phy-handle property */
467 plat->port_node = of_fwnode_handle(np);
468
469 /* Get max speed of operation from device tree */
470 of_property_read_u32(np, "max-speed", &plat->max_speed);
471
472 plat->bus_id = of_alias_get_id(np, "ethernet");
473 if (plat->bus_id < 0)
474 plat->bus_id = 0;
475
476 /* Default to phy auto-detection */
477 plat->phy_addr = -1;
478
479 /* Default to get clk_csr from stmmac_clk_csr_set(),
480 * or get clk_csr from device tree.
481 */
482 plat->clk_csr = -1;
483 if (of_property_read_u32(np, "snps,clk-csr", &plat->clk_csr))
484 of_property_read_u32(np, "clk_csr", &plat->clk_csr);
485
486 /* "snps,phy-addr" is not a standard property. Mark it as deprecated
487 * and warn of its use. Remove this when phy node support is added.
488 */
489 if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
490 dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
491
492 rc = stmmac_mdio_setup(plat, np, &pdev->dev);
493 if (rc)
494 return ERR_PTR(rc);
495
496 of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
497
498 of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
499
500 plat->force_sf_dma_mode =
501 of_property_read_bool(np, "snps,force_sf_dma_mode");
502
503 if (of_property_read_bool(np, "snps,en-tx-lpi-clockgating"))
504 plat->flags |= STMMAC_FLAG_EN_TX_LPI_CLOCKGATING;
505
506 /* Set the maxmtu to a default of JUMBO_LEN in case the
507 * parameter is not present in the device tree.
508 */
509 plat->maxmtu = JUMBO_LEN;
510
511 /* Set default value for multicast hash bins */
512 plat->multicast_filter_bins = HASH_TABLE_SIZE;
513
514 /* Set default value for unicast filter entries */
515 plat->unicast_filter_entries = 1;
516
517 /*
518 * Currently only the properties needed on SPEAr600
519 * are provided. All other properties should be added
520 * once needed on other platforms.
521 */
522 if (of_device_is_compatible(np, "st,spear600-gmac") ||
523 of_device_is_compatible(np, "snps,dwmac-3.50a") ||
524 of_device_is_compatible(np, "snps,dwmac-3.70a") ||
525 of_device_is_compatible(np, "snps,dwmac")) {
526 /* Note that the max-frame-size parameter as defined in the
527 * ePAPR v1.1 spec is defined as max-frame-size, it's
528 * actually used as the IEEE definition of MAC Client
529 * data, or MTU. The ePAPR specification is confusing as
530 * the definition is max-frame-size, but usage examples
531 * are clearly MTUs
532 */
533 of_property_read_u32(np, "max-frame-size", &plat->maxmtu);
534 of_property_read_u32(np, "snps,multicast-filter-bins",
535 &plat->multicast_filter_bins);
536 of_property_read_u32(np, "snps,perfect-filter-entries",
537 &plat->unicast_filter_entries);
538 plat->unicast_filter_entries = dwmac1000_validate_ucast_entries(
539 &pdev->dev, plat->unicast_filter_entries);
540 plat->multicast_filter_bins = dwmac1000_validate_mcast_bins(
541 &pdev->dev, plat->multicast_filter_bins);
542 plat->has_gmac = 1;
543 plat->pmt = 1;
544 }
545
546 if (of_device_is_compatible(np, "snps,dwmac-3.40a")) {
547 plat->has_gmac = 1;
548 plat->enh_desc = 1;
549 plat->tx_coe = 1;
550 plat->bugged_jumbo = 1;
551 plat->pmt = 1;
552 }
553
554 if (of_device_is_compatible(np, "snps,dwmac-4.00") ||
555 of_device_is_compatible(np, "snps,dwmac-4.10a") ||
556 of_device_is_compatible(np, "snps,dwmac-4.20a") ||
557 of_device_is_compatible(np, "snps,dwmac-5.10a") ||
558 of_device_is_compatible(np, "snps,dwmac-5.20")) {
559 plat->has_gmac4 = 1;
560 plat->has_gmac = 0;
561 plat->pmt = 1;
562 if (of_property_read_bool(np, "snps,tso"))
563 plat->flags |= STMMAC_FLAG_TSO_EN;
564 }
565
566 if (of_device_is_compatible(np, "snps,dwmac-3.610") ||
567 of_device_is_compatible(np, "snps,dwmac-3.710")) {
568 plat->enh_desc = 1;
569 plat->bugged_jumbo = 1;
570 plat->force_sf_dma_mode = 1;
571 }
572
573 if (of_device_is_compatible(np, "snps,dwxgmac")) {
574 plat->has_xgmac = 1;
575 plat->pmt = 1;
576 if (of_property_read_bool(np, "snps,tso"))
577 plat->flags |= STMMAC_FLAG_TSO_EN;
578 }
579
580 dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
581 GFP_KERNEL);
582 if (!dma_cfg) {
583 stmmac_remove_config_dt(pdev, plat);
584 return ERR_PTR(-ENOMEM);
585 }
586 plat->dma_cfg = dma_cfg;
587
588 of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
589 if (!dma_cfg->pbl)
590 dma_cfg->pbl = DEFAULT_DMA_PBL;
591 of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
592 of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
593 dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");
594
595 dma_cfg->aal = of_property_read_bool(np, "snps,aal");
596 dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
597 dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
598
599 plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
600 if (plat->force_thresh_dma_mode && plat->force_sf_dma_mode) {
601 plat->force_sf_dma_mode = 0;
602 dev_warn(&pdev->dev,
603 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n");
604 }
605
606 of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed);
607
608 plat->axi = stmmac_axi_setup(pdev);
609
610 rc = stmmac_mtl_setup(pdev, plat);
611 if (rc) {
612 stmmac_remove_config_dt(pdev, plat);
613 return ERR_PTR(rc);
614 }
615
616 /* clock setup */
617 if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
618 plat->stmmac_clk = devm_clk_get(&pdev->dev,
619 STMMAC_RESOURCE_NAME);
620 if (IS_ERR(plat->stmmac_clk)) {
621 dev_warn(&pdev->dev, "Cannot get CSR clock\n");
622 plat->stmmac_clk = NULL;
623 }
624 clk_prepare_enable(plat->stmmac_clk);
625 }
626
627 plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
628 if (IS_ERR(plat->pclk)) {
629 ret = plat->pclk;
630 goto error_pclk_get;
631 }
632 clk_prepare_enable(plat->pclk);
633
634 /* Fall-back to main clock in case of no PTP ref is passed */
635 plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
636 if (IS_ERR(plat->clk_ptp_ref)) {
637 plat->clk_ptp_rate = clk_get_rate(plat->stmmac_clk);
638 plat->clk_ptp_ref = NULL;
639 dev_info(&pdev->dev, "PTP uses main clock\n");
640 } else {
641 plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
642 dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
643 }
644
645 plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
646 STMMAC_RESOURCE_NAME);
647 if (IS_ERR(plat->stmmac_rst)) {
648 ret = plat->stmmac_rst;
649 goto error_hw_init;
650 }
651
652 plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
653 &pdev->dev, "ahb");
654 if (IS_ERR(plat->stmmac_ahb_rst)) {
655 ret = plat->stmmac_ahb_rst;
656 goto error_hw_init;
657 }
658
659 return plat;
660
661 error_hw_init:
662 clk_disable_unprepare(plat->pclk);
663 error_pclk_get:
664 clk_disable_unprepare(plat->stmmac_clk);
665
666 return ret;
667 }
668
devm_stmmac_remove_config_dt(void * data)669 static void devm_stmmac_remove_config_dt(void *data)
670 {
671 struct plat_stmmacenet_data *plat = data;
672
673 /* Platform data argument is unused */
674 stmmac_remove_config_dt(NULL, plat);
675 }
676
677 /**
678 * devm_stmmac_probe_config_dt
679 * @pdev: platform_device structure
680 * @mac: MAC address to use
681 * Description: Devres variant of stmmac_probe_config_dt(). Does not require
682 * the user to call stmmac_remove_config_dt() at driver detach.
683 */
684 struct plat_stmmacenet_data *
devm_stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)685 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
686 {
687 struct plat_stmmacenet_data *plat;
688 int ret;
689
690 plat = stmmac_probe_config_dt(pdev, mac);
691 if (IS_ERR(plat))
692 return plat;
693
694 ret = devm_add_action_or_reset(&pdev->dev,
695 devm_stmmac_remove_config_dt, plat);
696 if (ret)
697 return ERR_PTR(ret);
698
699 return plat;
700 }
701 #else
702 struct plat_stmmacenet_data *
devm_stmmac_probe_config_dt(struct platform_device * pdev,u8 * mac)703 devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
704 {
705 return ERR_PTR(-EINVAL);
706 }
707 #endif /* CONFIG_OF */
708 EXPORT_SYMBOL_GPL(devm_stmmac_probe_config_dt);
709
stmmac_get_platform_resources(struct platform_device * pdev,struct stmmac_resources * stmmac_res)710 int stmmac_get_platform_resources(struct platform_device *pdev,
711 struct stmmac_resources *stmmac_res)
712 {
713 memset(stmmac_res, 0, sizeof(*stmmac_res));
714
715 /* Get IRQ information early to have an ability to ask for deferred
716 * probe if needed before we went too far with resource allocation.
717 */
718 stmmac_res->irq = platform_get_irq_byname(pdev, "macirq");
719 if (stmmac_res->irq < 0)
720 return stmmac_res->irq;
721
722 /* On some platforms e.g. SPEAr the wake up irq differs from the mac irq
723 * The external wake up irq can be passed through the platform code
724 * named as "eth_wake_irq"
725 *
726 * In case the wake up interrupt is not passed from the platform
727 * so the driver will continue to use the mac irq (ndev->irq)
728 */
729 stmmac_res->wol_irq =
730 platform_get_irq_byname_optional(pdev, "eth_wake_irq");
731 if (stmmac_res->wol_irq < 0) {
732 if (stmmac_res->wol_irq == -EPROBE_DEFER)
733 return -EPROBE_DEFER;
734 dev_info(&pdev->dev, "IRQ eth_wake_irq not found\n");
735 stmmac_res->wol_irq = stmmac_res->irq;
736 }
737
738 stmmac_res->lpi_irq =
739 platform_get_irq_byname_optional(pdev, "eth_lpi");
740 if (stmmac_res->lpi_irq < 0) {
741 if (stmmac_res->lpi_irq == -EPROBE_DEFER)
742 return -EPROBE_DEFER;
743 dev_info(&pdev->dev, "IRQ eth_lpi not found\n");
744 }
745
746 stmmac_res->sfty_irq =
747 platform_get_irq_byname_optional(pdev, "sfty");
748 if (stmmac_res->sfty_irq < 0) {
749 if (stmmac_res->sfty_irq == -EPROBE_DEFER)
750 return -EPROBE_DEFER;
751 dev_info(&pdev->dev, "IRQ sfty not found\n");
752 }
753
754 stmmac_res->addr = devm_platform_ioremap_resource(pdev, 0);
755
756 return PTR_ERR_OR_ZERO(stmmac_res->addr);
757 }
758 EXPORT_SYMBOL_GPL(stmmac_get_platform_resources);
759
760 /**
761 * stmmac_pltfr_init
762 * @pdev: pointer to the platform device
763 * @plat: driver data platform structure
764 * Description: Call the platform's init callback (if any) and propagate
765 * the return value.
766 */
stmmac_pltfr_init(struct platform_device * pdev,struct plat_stmmacenet_data * plat)767 static int stmmac_pltfr_init(struct platform_device *pdev,
768 struct plat_stmmacenet_data *plat)
769 {
770 int ret = 0;
771
772 if (plat->init)
773 ret = plat->init(pdev, plat->bsp_priv);
774
775 return ret;
776 }
777
778 /**
779 * stmmac_pltfr_exit
780 * @pdev: pointer to the platform device
781 * @plat: driver data platform structure
782 * Description: Call the platform's exit callback (if any).
783 */
stmmac_pltfr_exit(struct platform_device * pdev,struct plat_stmmacenet_data * plat)784 static void stmmac_pltfr_exit(struct platform_device *pdev,
785 struct plat_stmmacenet_data *plat)
786 {
787 if (plat->exit)
788 plat->exit(pdev, plat->bsp_priv);
789 }
790
791 /**
792 * stmmac_pltfr_probe
793 * @pdev: platform device pointer
794 * @plat: driver data platform structure
795 * @res: stmmac resources structure
796 * Description: This calls the platform's init() callback and probes the
797 * stmmac driver.
798 */
stmmac_pltfr_probe(struct platform_device * pdev,struct plat_stmmacenet_data * plat,struct stmmac_resources * res)799 int stmmac_pltfr_probe(struct platform_device *pdev,
800 struct plat_stmmacenet_data *plat,
801 struct stmmac_resources *res)
802 {
803 int ret;
804
805 ret = stmmac_pltfr_init(pdev, plat);
806 if (ret)
807 return ret;
808
809 ret = stmmac_dvr_probe(&pdev->dev, plat, res);
810 if (ret) {
811 stmmac_pltfr_exit(pdev, plat);
812 return ret;
813 }
814
815 return ret;
816 }
817 EXPORT_SYMBOL_GPL(stmmac_pltfr_probe);
818
devm_stmmac_pltfr_remove(void * data)819 static void devm_stmmac_pltfr_remove(void *data)
820 {
821 struct platform_device *pdev = data;
822
823 stmmac_pltfr_remove(pdev);
824 }
825
826 /**
827 * devm_stmmac_pltfr_probe
828 * @pdev: pointer to the platform device
829 * @plat: driver data platform structure
830 * @res: stmmac resources
831 * Description: Devres variant of stmmac_pltfr_probe(). Allows users to skip
832 * calling stmmac_pltfr_remove() on driver detach.
833 */
devm_stmmac_pltfr_probe(struct platform_device * pdev,struct plat_stmmacenet_data * plat,struct stmmac_resources * res)834 int devm_stmmac_pltfr_probe(struct platform_device *pdev,
835 struct plat_stmmacenet_data *plat,
836 struct stmmac_resources *res)
837 {
838 int ret;
839
840 ret = stmmac_pltfr_probe(pdev, plat, res);
841 if (ret)
842 return ret;
843
844 return devm_add_action_or_reset(&pdev->dev, devm_stmmac_pltfr_remove,
845 pdev);
846 }
847 EXPORT_SYMBOL_GPL(devm_stmmac_pltfr_probe);
848
849 /**
850 * stmmac_pltfr_remove
851 * @pdev: pointer to the platform device
852 * Description: This undoes the effects of stmmac_pltfr_probe() by removing the
853 * driver and calling the platform's exit() callback.
854 */
stmmac_pltfr_remove(struct platform_device * pdev)855 void stmmac_pltfr_remove(struct platform_device *pdev)
856 {
857 struct net_device *ndev = platform_get_drvdata(pdev);
858 struct stmmac_priv *priv = netdev_priv(ndev);
859 struct plat_stmmacenet_data *plat = priv->plat;
860
861 stmmac_dvr_remove(&pdev->dev);
862 stmmac_pltfr_exit(pdev, plat);
863 }
864 EXPORT_SYMBOL_GPL(stmmac_pltfr_remove);
865
866 /**
867 * stmmac_pltfr_suspend
868 * @dev: device pointer
869 * Description: this function is invoked when suspend the driver and it direcly
870 * call the main suspend function and then, if required, on some platform, it
871 * can call an exit helper.
872 */
stmmac_pltfr_suspend(struct device * dev)873 static int __maybe_unused stmmac_pltfr_suspend(struct device *dev)
874 {
875 int ret;
876 struct net_device *ndev = dev_get_drvdata(dev);
877 struct stmmac_priv *priv = netdev_priv(ndev);
878 struct platform_device *pdev = to_platform_device(dev);
879
880 ret = stmmac_suspend(dev);
881 stmmac_pltfr_exit(pdev, priv->plat);
882
883 return ret;
884 }
885
886 /**
887 * stmmac_pltfr_resume
888 * @dev: device pointer
889 * Description: this function is invoked when resume the driver before calling
890 * the main resume function, on some platforms, it can call own init helper
891 * if required.
892 */
stmmac_pltfr_resume(struct device * dev)893 static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
894 {
895 struct net_device *ndev = dev_get_drvdata(dev);
896 struct stmmac_priv *priv = netdev_priv(ndev);
897 struct platform_device *pdev = to_platform_device(dev);
898 int ret;
899
900 ret = stmmac_pltfr_init(pdev, priv->plat);
901 if (ret)
902 return ret;
903
904 return stmmac_resume(dev);
905 }
906
stmmac_runtime_suspend(struct device * dev)907 static int __maybe_unused stmmac_runtime_suspend(struct device *dev)
908 {
909 struct net_device *ndev = dev_get_drvdata(dev);
910 struct stmmac_priv *priv = netdev_priv(ndev);
911
912 stmmac_bus_clks_config(priv, false);
913
914 return 0;
915 }
916
stmmac_runtime_resume(struct device * dev)917 static int __maybe_unused stmmac_runtime_resume(struct device *dev)
918 {
919 struct net_device *ndev = dev_get_drvdata(dev);
920 struct stmmac_priv *priv = netdev_priv(ndev);
921
922 return stmmac_bus_clks_config(priv, true);
923 }
924
stmmac_pltfr_noirq_suspend(struct device * dev)925 static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev)
926 {
927 struct net_device *ndev = dev_get_drvdata(dev);
928 struct stmmac_priv *priv = netdev_priv(ndev);
929 int ret;
930
931 if (!netif_running(ndev))
932 return 0;
933
934 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
935 /* Disable clock in case of PWM is off */
936 clk_disable_unprepare(priv->plat->clk_ptp_ref);
937
938 ret = pm_runtime_force_suspend(dev);
939 if (ret)
940 return ret;
941 }
942
943 return 0;
944 }
945
stmmac_pltfr_noirq_resume(struct device * dev)946 static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev)
947 {
948 struct net_device *ndev = dev_get_drvdata(dev);
949 struct stmmac_priv *priv = netdev_priv(ndev);
950 int ret;
951
952 if (!netif_running(ndev))
953 return 0;
954
955 if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
956 /* enable the clk previously disabled */
957 ret = pm_runtime_force_resume(dev);
958 if (ret)
959 return ret;
960
961 ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
962 if (ret < 0) {
963 netdev_warn(priv->dev,
964 "failed to enable PTP reference clock: %pe\n",
965 ERR_PTR(ret));
966 return ret;
967 }
968 }
969
970 return 0;
971 }
972
973 const struct dev_pm_ops stmmac_pltfr_pm_ops = {
974 SET_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_suspend, stmmac_pltfr_resume)
975 SET_RUNTIME_PM_OPS(stmmac_runtime_suspend, stmmac_runtime_resume, NULL)
976 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(stmmac_pltfr_noirq_suspend, stmmac_pltfr_noirq_resume)
977 };
978 EXPORT_SYMBOL_GPL(stmmac_pltfr_pm_ops);
979
980 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet platform support");
981 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
982 MODULE_LICENSE("GPL");
983