1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * drivers/net/phy/ste10Xp.c
4 *
5 * Driver for STMicroelectronics STe10Xp PHYs
6 *
7 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
8 *
9 * Copyright (c) 2008 STMicroelectronics Limited
10 */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/sched.h>
15 #include <linux/kernel.h>
16 #include <linux/moduleparam.h>
17 #include <linux/interrupt.h>
18 #include <linux/netdevice.h>
19 #include <linux/ethtool.h>
20 #include <linux/mii.h>
21 #include <linux/phy.h>
22
23 #define MII_XCIIS 0x11 /* Configuration Info IRQ & Status Reg */
24 #define MII_XIE 0x12 /* Interrupt Enable Register */
25 #define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
26
27 #define STE101P_PHY_ID 0x00061c50
28 #define STE100P_PHY_ID 0x1c040011
29
ste10Xp_config_init(struct phy_device * phydev)30 static int ste10Xp_config_init(struct phy_device *phydev)
31 {
32 int value, err;
33
34 /* Software Reset PHY */
35 value = phy_read(phydev, MII_BMCR);
36 if (value < 0)
37 return value;
38
39 value |= BMCR_RESET;
40 err = phy_write(phydev, MII_BMCR, value);
41 if (err < 0)
42 return err;
43
44 do {
45 value = phy_read(phydev, MII_BMCR);
46 } while (value & BMCR_RESET);
47
48 return 0;
49 }
50
ste10Xp_ack_interrupt(struct phy_device * phydev)51 static int ste10Xp_ack_interrupt(struct phy_device *phydev)
52 {
53 int err = phy_read(phydev, MII_XCIIS);
54
55 if (err < 0)
56 return err;
57
58 return 0;
59 }
60
ste10Xp_config_intr(struct phy_device * phydev)61 static int ste10Xp_config_intr(struct phy_device *phydev)
62 {
63 int err;
64
65 if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
66 /* clear any pending interrupts */
67 err = ste10Xp_ack_interrupt(phydev);
68 if (err)
69 return err;
70
71 /* Enable all STe101P interrupts (PR12) */
72 err = phy_write(phydev, MII_XIE, MII_XIE_DEFAULT_MASK);
73 } else {
74 err = phy_write(phydev, MII_XIE, 0);
75 if (err)
76 return err;
77
78 err = ste10Xp_ack_interrupt(phydev);
79 }
80
81 return err;
82 }
83
ste10Xp_handle_interrupt(struct phy_device * phydev)84 static irqreturn_t ste10Xp_handle_interrupt(struct phy_device *phydev)
85 {
86 int irq_status;
87
88 irq_status = phy_read(phydev, MII_XCIIS);
89 if (irq_status < 0) {
90 phy_error(phydev);
91 return IRQ_NONE;
92 }
93
94 if (!(irq_status & MII_XIE_DEFAULT_MASK))
95 return IRQ_NONE;
96
97 phy_trigger_machine(phydev);
98
99 return IRQ_HANDLED;
100 }
101
102 static struct phy_driver ste10xp_pdriver[] = {
103 {
104 .phy_id = STE101P_PHY_ID,
105 .phy_id_mask = 0xfffffff0,
106 .name = "STe101p",
107 /* PHY_BASIC_FEATURES */
108 .config_init = ste10Xp_config_init,
109 .config_intr = ste10Xp_config_intr,
110 .handle_interrupt = ste10Xp_handle_interrupt,
111 .suspend = genphy_suspend,
112 .resume = genphy_resume,
113 }, {
114 .phy_id = STE100P_PHY_ID,
115 .phy_id_mask = 0xffffffff,
116 .name = "STe100p",
117 /* PHY_BASIC_FEATURES */
118 .config_init = ste10Xp_config_init,
119 .config_intr = ste10Xp_config_intr,
120 .handle_interrupt = ste10Xp_handle_interrupt,
121 .suspend = genphy_suspend,
122 .resume = genphy_resume,
123 } };
124
125 module_phy_driver(ste10xp_pdriver);
126
127 static struct mdio_device_id __maybe_unused ste10Xp_tbl[] = {
128 { STE101P_PHY_ID, 0xfffffff0 },
129 { STE100P_PHY_ID, 0xffffffff },
130 { }
131 };
132
133 MODULE_DEVICE_TABLE(mdio, ste10Xp_tbl);
134
135 MODULE_DESCRIPTION("STMicroelectronics STe10Xp PHY driver");
136 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
137 MODULE_LICENSE("GPL");
138