1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * DRM driver for Solomon SSD13xx OLED displays (SPI bus)
4 *
5 * Copyright 2022 Red Hat Inc.
6 * Authors: Javier Martinez Canillas <javierm@redhat.com>
7 */
8 #include <linux/spi/spi.h>
9 #include <linux/module.h>
10
11 #include "ssd130x.h"
12
13 #define DRIVER_NAME "ssd130x-spi"
14 #define DRIVER_DESC "DRM driver for Solomon SSD13xx OLED displays (SPI)"
15
16 struct ssd130x_spi_transport {
17 struct spi_device *spi;
18 struct gpio_desc *dc;
19 };
20
21 /*
22 * The regmap bus .write handler, it is just a wrapper around spi_write()
23 * but toggling the Data/Command control pin (D/C#). Since for 4-wire SPI
24 * a D/C# pin is used, in contrast with I2C where a control byte is sent,
25 * prior to every data byte, that contains a bit with the D/C# value.
26 *
27 * These control bytes are considered registers by the ssd130x core driver
28 * and can be used by the ssd130x SPI driver to determine if the data sent
29 * is for a command register or for the Graphic Display Data RAM (GDDRAM).
30 */
ssd130x_spi_write(void * context,const void * data,size_t count)31 static int ssd130x_spi_write(void *context, const void *data, size_t count)
32 {
33 struct ssd130x_spi_transport *t = context;
34 struct spi_device *spi = t->spi;
35 const u8 *reg = data;
36
37 if (*reg == SSD13XX_COMMAND)
38 gpiod_set_value_cansleep(t->dc, 0);
39
40 if (*reg == SSD13XX_DATA)
41 gpiod_set_value_cansleep(t->dc, 1);
42
43 /* Remove control byte since is not used in a 4-wire SPI interface */
44 return spi_write(spi, reg + 1, count - 1);
45 }
46
47 /* The ssd130x driver does not read registers but regmap expects a .read */
ssd130x_spi_read(void * context,const void * reg,size_t reg_size,void * val,size_t val_size)48 static int ssd130x_spi_read(void *context, const void *reg, size_t reg_size,
49 void *val, size_t val_size)
50 {
51 return -EOPNOTSUPP;
52 }
53
54 static const struct regmap_config ssd130x_spi_regmap_config = {
55 .reg_bits = 8,
56 .val_bits = 8,
57 .write = ssd130x_spi_write,
58 .read = ssd130x_spi_read,
59 .can_multi_write = true,
60 };
61
ssd130x_spi_probe(struct spi_device * spi)62 static int ssd130x_spi_probe(struct spi_device *spi)
63 {
64 struct ssd130x_spi_transport *t;
65 struct ssd130x_device *ssd130x;
66 struct regmap *regmap;
67 struct gpio_desc *dc;
68 struct device *dev = &spi->dev;
69
70 dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
71 if (IS_ERR(dc))
72 return dev_err_probe(dev, PTR_ERR(dc),
73 "Failed to get dc gpio\n");
74
75 t = devm_kzalloc(dev, sizeof(*t), GFP_KERNEL);
76 if (!t)
77 return dev_err_probe(dev, -ENOMEM,
78 "Failed to allocate SPI transport data\n");
79
80 t->spi = spi;
81 t->dc = dc;
82
83 regmap = devm_regmap_init(dev, NULL, t, &ssd130x_spi_regmap_config);
84 if (IS_ERR(regmap))
85 return PTR_ERR(regmap);
86
87 ssd130x = ssd130x_probe(dev, regmap);
88 if (IS_ERR(ssd130x))
89 return PTR_ERR(ssd130x);
90
91 spi_set_drvdata(spi, ssd130x);
92
93 return 0;
94 }
95
ssd130x_spi_remove(struct spi_device * spi)96 static void ssd130x_spi_remove(struct spi_device *spi)
97 {
98 struct ssd130x_device *ssd130x = spi_get_drvdata(spi);
99
100 ssd130x_remove(ssd130x);
101 }
102
ssd130x_spi_shutdown(struct spi_device * spi)103 static void ssd130x_spi_shutdown(struct spi_device *spi)
104 {
105 struct ssd130x_device *ssd130x = spi_get_drvdata(spi);
106
107 ssd130x_shutdown(ssd130x);
108 }
109
110 static const struct of_device_id ssd130x_of_match[] = {
111 /* ssd130x family */
112 {
113 .compatible = "sinowealth,sh1106",
114 .data = &ssd130x_variants[SH1106_ID],
115 },
116 {
117 .compatible = "solomon,ssd1305",
118 .data = &ssd130x_variants[SSD1305_ID],
119 },
120 {
121 .compatible = "solomon,ssd1306",
122 .data = &ssd130x_variants[SSD1306_ID],
123 },
124 {
125 .compatible = "solomon,ssd1307",
126 .data = &ssd130x_variants[SSD1307_ID],
127 },
128 {
129 .compatible = "solomon,ssd1309",
130 .data = &ssd130x_variants[SSD1309_ID],
131 },
132 /* ssd132x family */
133 {
134 .compatible = "solomon,ssd1322",
135 .data = &ssd130x_variants[SSD1322_ID],
136 },
137 {
138 .compatible = "solomon,ssd1325",
139 .data = &ssd130x_variants[SSD1325_ID],
140 },
141 {
142 .compatible = "solomon,ssd1327",
143 .data = &ssd130x_variants[SSD1327_ID],
144 },
145 /* ssd133x family */
146 {
147 .compatible = "solomon,ssd1331",
148 .data = &ssd130x_variants[SSD1331_ID],
149 },
150 { /* sentinel */ }
151 };
152 MODULE_DEVICE_TABLE(of, ssd130x_of_match);
153
154 #if IS_MODULE(CONFIG_DRM_SSD130X_SPI)
155 /*
156 * The SPI core always reports a MODALIAS uevent of the form "spi:<dev>", even
157 * if the device was registered via OF. This means that the module will not be
158 * auto loaded, unless it contains an alias that matches the MODALIAS reported.
159 *
160 * To workaround this issue, add a SPI device ID table. Even when this should
161 * not be needed for this driver to match the registered SPI devices.
162 */
163 static const struct spi_device_id ssd130x_spi_table[] = {
164 /* ssd130x family */
165 { "sh1106", SH1106_ID },
166 { "ssd1305", SSD1305_ID },
167 { "ssd1306", SSD1306_ID },
168 { "ssd1307", SSD1307_ID },
169 { "ssd1309", SSD1309_ID },
170 /* ssd132x family */
171 { "ssd1322", SSD1322_ID },
172 { "ssd1325", SSD1325_ID },
173 { "ssd1327", SSD1327_ID },
174 /* ssd133x family */
175 { "ssd1331", SSD1331_ID },
176 { /* sentinel */ }
177 };
178 MODULE_DEVICE_TABLE(spi, ssd130x_spi_table);
179 #endif
180
181 static struct spi_driver ssd130x_spi_driver = {
182 .driver = {
183 .name = DRIVER_NAME,
184 .of_match_table = ssd130x_of_match,
185 },
186 .probe = ssd130x_spi_probe,
187 .remove = ssd130x_spi_remove,
188 .shutdown = ssd130x_spi_shutdown,
189 };
190 module_spi_driver(ssd130x_spi_driver);
191
192 MODULE_DESCRIPTION(DRIVER_DESC);
193 MODULE_AUTHOR("Javier Martinez Canillas <javierm@redhat.com>");
194 MODULE_LICENSE("GPL");
195 MODULE_IMPORT_NS("DRM_SSD130X");
196