xref: /titanic_51/usr/src/lib/auditd_plugins/binfile/binfile.c (revision f89940742f5d14dde79b69b98a414dd7b7f585c7)

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
 *
 * write binary audit records directly to a file.
 */

#define	DEBUG   0

#if DEBUG
#define	DPRINT(x) { (void) fprintf x; }
#else
#define	DPRINT(x)
#endif

/*
 * auditd_plugin_open(), auditd_plugin() and auditd_plugin_close()
 * implement a replacable library for use by auditd; they are a
 * project private interface and may change without notice.
 *
 */

#include <assert.h>
#include <bsm/audit.h>
#include <bsm/audit_record.h>
#include <bsm/libbsm.h>
#include <errno.h>
#include <fcntl.h>
#include <libintl.h>
#include <netdb.h>
#include <pthread.h>
#include <secdb.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/param.h>
#include <sys/types.h>
#include <time.h>
#include <tzfile.h>
#include <unistd.h>
#include <sys/vfs.h>
#include <limits.h>
#include <syslog.h>
#include <security/auditd.h>
#include <audit_plugin.h>

#define	AUDIT_DATE_SZ	14
#define	AUDIT_FNAME_SZ	2 * AUDIT_DATE_SZ + 2 + MAXHOSTNAMELEN

			/* per-directory status */
#define	SOFT_SPACE	0	/* minfree or less space available	*/
#define	PLENTY_SPACE	1	/* more than minfree available		*/
#define	SPACE_FULL	2	/* out of space				*/

#define	AVAIL_MIN	50	/* If there are less that this number	*/
				/* of blocks avail, the filesystem is	*/
				/* presumed full.			*/

#define	ALLHARD_DELAY	20	/* Call audit_warn(allhard) every 20 seconds */

/* minimum reasonable size in bytes to roll over an audit file */
#define	FSIZE_MIN	512000

/*
 * The directory list is a circular linked list.  It is pointed into by
 * activeDir.  Each element contains the pointer to the next
 * element, the directory pathname, a flag for how much space there is
 * in the directory's filesystem, and a file handle.  Since a new
 * directory list can be created from auditd_plugin_open() while the
 * current list is in use, activeDir is protected by log_mutex.
 */
typedef struct dirlist_s dirlist_t;
struct dirlist_s {
	dirlist_t	*dl_next;
	int		dl_space;
	int		dl_flags;
	char		*dl_dirname;
	char		*dl_filename;	/* file name (not path) if open */
	int		dl_fd;		/* file handle, -1 unless open */
};
/*
 * Defines for dl_flags
 */
#define	SOFT_WARNED	0x0001	/* already did soft warning for this dir */
#define	HARD_WARNED	0x0002	/* already did hard warning for this dir */

#if DEBUG
static FILE		*dbfp;			/* debug file */
#endif

static pthread_mutex_t	log_mutex;
static int		binfile_is_open = 0;

static int		minfree = -1;
static int		minfreeblocks;		/* minfree in blocks */

static dirlist_t	*lastOpenDir = NULL;    /* last activeDir */
static dirlist_t	*activeDir = NULL;	/* to be current directory */
static dirlist_t	*startdir;		/* first dir in the ring */
static int		activeCount = 0;	/* number of dirs in the ring */

static int		openNewFile = 0;	/* need to open a new file */
static int		hung_count = 0;		/* count of audit_warn hard */

/* flag from audit_plugin_open to audit_plugin_close */
static int		am_open = 0;
/* preferred dir state */
static int		fullness_state = PLENTY_SPACE;

/*
 * These are used to implement a maximum size for the auditing
 * file. binfile_maxsize is set via the 'p_fsize' parameter to the
 * audit_binfile plugin.
 */
static uint_t		binfile_cursize = 0;
static uint_t		binfile_maxsize = 0;

static int open_log(dirlist_t *);

static void
freedirlist(dirlist_t *head)
{
	dirlist_t	 *n1, *n2;
	/*
	 * Free up the old directory list if any
	 */
	if (head != NULL) {
		n1 = head;
		do {
			n2 = n1->dl_next;
			free(n1->dl_dirname);
			free(n1->dl_filename);
			free(n1);
			n1 = n2;
		} while (n1 != head);
	}
}

dirlist_t *
dupdirnode(dirlist_t *node_orig)
{
	dirlist_t	*node_new;

	if ((node_new = calloc(1, sizeof (dirlist_t))) == NULL) {
		return (NULL);
	}

	if (node_orig->dl_dirname != NULL &&
	    (node_new->dl_dirname = strdup(node_orig->dl_dirname)) == NULL ||
	    node_orig->dl_filename != NULL &&
	    (node_new->dl_filename = strdup(node_orig->dl_filename)) == NULL) {
		freedirlist(node_new);
		return (NULL);
	}

	node_new->dl_next = node_new;
	node_new->dl_space = node_orig->dl_space;
	node_new->dl_flags = node_orig->dl_flags;
	node_new->dl_fd = node_orig->dl_fd;

	return (node_new);
}

/*
 * add to a linked list of directories available for writing
 *
 */
static int
growauditlist(dirlist_t **listhead, char *dirlist,
    dirlist_t *endnode, int *count)
{
	dirlist_t	*node;
	char		*bs, *be;
	dirlist_t	**node_p;
	char		*dirname;
	char		*remainder;

	DPRINT((dbfp, "binfile: dirlist=%s\n", dirlist));

	if (*listhead == NULL)
		node_p = listhead;
	else
		node_p = &(endnode->dl_next);

	node = NULL;
	while ((dirname = strtok_r(dirlist, ",", &remainder)) != NULL) {
		dirlist = NULL;

		DPRINT((dbfp, "binfile: p_dir = %s\n", dirname));

		(*count)++;
		node = malloc(sizeof (dirlist_t));
		if (node == NULL)
			return (AUDITD_NO_MEMORY);

		node->dl_flags = 0;
		node->dl_filename = NULL;
		node->dl_fd = -1;
		node->dl_space = PLENTY_SPACE;

		node->dl_dirname = malloc((unsigned)strlen(dirname) + 1);
		if (node->dl_dirname == NULL)
			return (AUDITD_NO_MEMORY);

		bs = dirname;
		while ((*bs == ' ') || (*bs == '\t'))	/* trim blanks */
			bs++;
		be = bs + strlen(bs) - 1;
		while (be > bs) {	/* trim trailing blanks */
			if ((*bs != ' ') && (*bs != '\t'))
				break;
			be--;
		}
		*(be + 1) = '\0';
		(void) strlcpy(node->dl_dirname, bs, AUDIT_FNAME_SZ);

		if (*listhead != NULL)
			node->dl_next = *listhead;
		else
			node->dl_next = node;
		*node_p = node;
		node_p = &(node->dl_next);

	}
	return (0);
}

/*
 * create a linked list of directories available for writing
 *
 * if a list already exists, the two are compared and the new one is
 * used only if it is different than the old.
 *
 * returns -2 for new or changed list, 0 for unchanged list and -1 for
 * error.  (Positive returns are for AUDITD_<error code> values)
 *
 */
static int
loadauditlist(char *dirstr, char *minfreestr)
{
	dirlist_t	*n1, *n2;
	dirlist_t	*listhead = NULL;
	dirlist_t	*thisdir;
	int		node_count = 0;
	int		rc;
	int		temp_minfree;

	static dirlist_t	*activeList = NULL;	/* directory list */

	DPRINT((dbfp, "binfile: Loading audit list from audit service "
	    "(audit_binfile)\n"));

	if (dirstr == NULL || minfreestr == NULL) {
		DPRINT((dbfp, "binfile: internal error"));
		return (-1);
	}
	if ((rc = growauditlist(&listhead, dirstr, NULL, &node_count)) != 0) {
		return (rc);
	}
	if (node_count == 0) {
		/*
		 * there was a problem getting the directory
		 * list or remote host info from the audit_binfile
		 * configuration even though auditd thought there was
		 * at least 1 good entry
		 */
		DPRINT((dbfp, "binfile: "
		    "problem getting directory / libpath list "
		    "from audit_binfile configuration.\n"));
		return (-1);
	}

#if DEBUG
	/* print out directory list */
	if (listhead != NULL) {
		(void) fprintf(dbfp, "Directory list:\n\t%s\n",
		    listhead->dl_dirname);
		thisdir = listhead->dl_next;

		while (thisdir != listhead) {
			(void) fprintf(dbfp, "\t%s\n", thisdir->dl_dirname);
			thisdir = thisdir->dl_next;
		}
	}
#endif	/* DEBUG */

	thisdir = listhead;

	/* See if the list has changed (rc = 0 if no change, else 1) */
	rc = 0;
	if (node_count == activeCount) {
		n1 = listhead;
		n2 = activeList;
		do {
			if (strcmp(n1->dl_dirname, n2->dl_dirname) != 0) {
				DPRINT((dbfp,
				    "binfile: new dirname = %s\n"
				    "binfile: old dirname = %s\n",
				    n1->dl_dirname,
				    n2->dl_dirname));
				rc = -2;
				break;
			}
			n1 = n1->dl_next;
			n2 = n2->dl_next;
		} while ((n1 != listhead) && (n2 != activeList));
	} else {
		DPRINT((dbfp, "binfile: dir counts differs\n"
		    "binfile:  old dir count = %d\n"
		    "binfile:  new dir count = %d\n",
		    activeCount, node_count));
		rc = -2;
	}
	if (rc == -2) {
		(void) pthread_mutex_lock(&log_mutex);
		DPRINT((dbfp, "loadauditlist:  close / open audit.log(4)\n"));
		if (open_log(listhead) == 0) {
			openNewFile = 1;	/* try again later */
		} else {
			openNewFile = 0;
		}
		freedirlist(activeList);	/* old list */
		activeList = listhead;		/* new list */
		activeDir = startdir = thisdir;
		activeCount = node_count;
		(void) pthread_mutex_unlock(&log_mutex);
	} else {
		freedirlist(listhead);
	}

	/* Get the minfree value. */
	if (minfreestr != NULL)
		temp_minfree = atoi(minfreestr);

	if ((temp_minfree < 0) || (temp_minfree > 100))
		temp_minfree = 0;

	if (minfree != temp_minfree) {
		DPRINT((dbfp, "minfree:  old = %d, new = %d\n",
		    minfree, temp_minfree));
		rc = -2;		/* data change */
		minfree = temp_minfree;
	}

	return (rc);
}

/*
 * getauditdate - get the current time (GMT) and put it in the form
 *		  yyyymmddHHMMSS .
 */
static void
getauditdate(char *date)
{
	struct timeval tp;
	struct timezone tzp;
	struct tm tm;

	(void) gettimeofday(&tp, &tzp);
	tm = *gmtime(&tp.tv_sec);
	/*
	 * NOTE:  if we want to use gmtime, we have to be aware that the
	 *	structure only keeps the year as an offset from TM_YEAR_BASE.
	 *	I have used TM_YEAR_BASE in this code so that if they change
	 *	this base from 1900 to 2000, it will hopefully mean that this
	 *	code does not have to change.  TM_YEAR_BASE is defined in
	 *	tzfile.h .
	 */
	(void) sprintf(date, "%.4d%.2d%.2d%.2d%.2d%.2d",
	    tm.tm_year + TM_YEAR_BASE, tm.tm_mon + 1, tm.tm_mday,
	    tm.tm_hour, tm.tm_min, tm.tm_sec);
}



/*
 * write_file_token - put the file token into the audit log
 */
static int
write_file_token(int fd, char *name)
{
	adr_t adr;					/* xdr ptr */
	struct timeval tv;				/* time now */
	char for_adr[AUDIT_FNAME_SZ + AUDIT_FNAME_SZ];	/* plenty of room */
	char	token_id;
	short	i;

	(void) gettimeofday(&tv, (struct timezone *)0);
	i = strlen(name) + 1;
	adr_start(&adr, for_adr);
#ifdef _LP64
		token_id = AUT_OTHER_FILE64;
		adr_char(&adr, &token_id, 1);
		adr_int64(&adr, (int64_t *)& tv, 2);
#else
		token_id = AUT_OTHER_FILE32;
		adr_char(&adr, &token_id, 1);
		adr_int32(&adr, (int32_t *)& tv, 2);
#endif

	adr_short(&adr, &i, 1);
	adr_char(&adr, name, i);

	if (write(fd, for_adr, adr_count(&adr)) < 0) {
		DPRINT((dbfp, "binfile: Bad write\n"));
		return (errno);
	}
	return (0);
}

/*
 * close_log - close the file if open.  Also put the name of the
 *	new log file in the trailer, and rename the old file
 *	to oldname.  The caller must hold log_mutext while calling
 *      close_log since any change to activeDir is a complete redo
 *	of all it points to.
 * arguments -
 *	oldname - the new name for the file to be closed
 *	newname - the name of the new log file (for the trailer)
 */
static void
close_log(dirlist_t **lastOpenDir_ptr, char *oname, char *newname)
{
	char		auditdate[AUDIT_DATE_SZ+1];
	char		*name;
	char		oldname[AUDIT_FNAME_SZ+1];
	dirlist_t 	*currentdir = *lastOpenDir_ptr;

	if ((currentdir == NULL) || (currentdir->dl_fd == -1))
		return;
	/*
	 * If oldname is blank, we were called by auditd_plugin_close()
	 * instead of by open_log, so we need to update our name.
	 */
	(void) strlcpy(oldname, oname, AUDIT_FNAME_SZ);

	if (strcmp(oldname, "") == 0) {
		getauditdate(auditdate);

		assert(currentdir->dl_filename != NULL);

		(void) strlcpy(oldname, currentdir->dl_filename,
		    AUDIT_FNAME_SZ);

		name = strrchr(oldname, '/') + 1;
		(void) memcpy(name + AUDIT_DATE_SZ + 1, auditdate,
		    AUDIT_DATE_SZ);
	}
	/*
	 * Write the trailer record and rename and close the file.
	 * If any of the write, rename, or close fail, ignore it
	 * since there is not much else we can do and the next open()
	 * will trigger the necessary full directory logic.
	 *
	 * newname is "" if binfile is being closed down.
	 */
	(void) write_file_token(currentdir->dl_fd, newname);
	if (currentdir->dl_fd >= 0) {
		(void) fsync(currentdir->dl_fd);
		(void) close(currentdir->dl_fd);
	}
	currentdir->dl_fd = -1;
	(void) rename(currentdir->dl_filename, oldname);

	DPRINT((dbfp, "binfile: Log closed %s\n", oldname));

	freedirlist(currentdir);
	*lastOpenDir_ptr = NULL;
}


/*
 * open_log - open a new file in the current directory.  If a
 *	file is already open, close it.
 *
 *	return 1 if ok, 0 if all directories are full.
 *
 *	lastOpenDir - used to get the oldfile name (and change it),
 *		to close the oldfile.
 *
 * The caller must hold log_mutex while calling open_log.
 *
 */
static int
open_log(dirlist_t *current_dir)
{
	char	auditdate[AUDIT_DATE_SZ + 1];
	char	oldname[AUDIT_FNAME_SZ + 1] = "";
	char	newname[AUDIT_FNAME_SZ + 1];
	char	*name;			/* pointer into oldname */
	int	opened = 0;
	int	error = 0;
	int	newfd = 0;

	static char		host[MAXHOSTNAMELEN + 1] = "";
	/* previous directory with open log file */

	if (host[0] == '\0')
		(void) gethostname(host, MAXHOSTNAMELEN);

	/* Get a filename which does not already exist */
	while (!opened) {
		getauditdate(auditdate);
		(void) snprintf(newname, AUDIT_FNAME_SZ,
		    "%s/%s.not_terminated.%s",
		    current_dir->dl_dirname, auditdate, host);
		newfd = open(newname,
		    O_RDWR | O_APPEND | O_CREAT | O_EXCL, 0640);
		if (newfd < 0) {
			switch (errno) {
			case EEXIST:
				DPRINT((dbfp,
				    "open_log says duplicate for %s "
				    "(will try another)\n", newname));
				(void) sleep(1);
				break;
			case ENOENT: {
				/* invalid path */
				char	*msg;
				(void) asprintf(&msg,
				    gettext("No such p_dir: %s\n"),
				    current_dir->dl_dirname);
				DPRINT((dbfp,
				    "open_log says about %s: %s\n",
				    newname, strerror(errno)));
				__audit_syslog("audit_binfile.so",
				    LOG_CONS | LOG_NDELAY,
				    LOG_DAEMON, LOG_ERR, msg);
				free(msg);
				current_dir = current_dir->dl_next;
				return (0);
			}
			default:
				/* open failed */
				DPRINT((dbfp,
				    "open_log says full for %s: %s\n",
				    newname, strerror(errno)));
				current_dir->dl_space = SPACE_FULL;
				current_dir = current_dir->dl_next;
				return (0);
			} /* switch */
		} else
			opened = 1;
	} /* while */

	/*
	 * When we get here, we have opened our new log file.
	 * Now we need to update the name of the old file to
	 * store in this file's header.  lastOpenDir may point
	 * to current_dir if the list is only one entry long and
	 * there is only one list.
	 */
	if ((lastOpenDir != NULL) && (lastOpenDir->dl_filename != NULL)) {
		(void) strlcpy(oldname, lastOpenDir->dl_filename,
		    AUDIT_FNAME_SZ);
		name = (char *)strrchr(oldname, '/') + 1;

		(void) memcpy(name + AUDIT_DATE_SZ + 1, auditdate,
		    AUDIT_DATE_SZ);

		close_log(&lastOpenDir, oldname, newname);
	}
	error = write_file_token(newfd, oldname);
	if (error) {
		/* write token failed */
		(void) close(newfd);

		current_dir->dl_space = SPACE_FULL;
		current_dir->dl_fd = -1;
		free(current_dir->dl_filename);
		current_dir->dl_filename = NULL;
		current_dir = current_dir->dl_next;
		return (0);
	} else {
		if (current_dir->dl_filename != NULL) {
			free(current_dir->dl_filename);
		}
		current_dir->dl_filename = strdup(newname);
		current_dir->dl_fd = newfd;

		if (lastOpenDir == NULL) {
			freedirlist(lastOpenDir);
			if ((lastOpenDir = dupdirnode(current_dir)) == NULL) {
				__audit_syslog("audit_binfile.so",
				    LOG_CONS | LOG_NDELAY,
				    LOG_DAEMON, LOG_ERR, gettext("no memory"));
				return (0);
			}
			DPRINT((dbfp, "open_log created new lastOpenDir "
			    "(%s, %s [fd: %d])\n",
			    lastOpenDir->dl_dirname == NULL ? "" :
			    lastOpenDir->dl_dirname,
			    lastOpenDir->dl_filename == NULL ? "" :
			    lastOpenDir->dl_filename, lastOpenDir->dl_fd));
		}

		/*
		 * New file opened, so reset file size statistic (used
		 * to ensure audit log does not grow above size limit
		 * set by p_fsize).
		 */
		binfile_cursize = 0;

		(void) __logpost(newname);

		DPRINT((dbfp, "binfile: Log opened: %s\n", newname));
		return (1);
	}
}

#define	IGNORE_SIZE	8192
/*
 * spacecheck - determine whether the given directory's filesystem
 *	has the at least the space requested.  Also set the space
 *	value in the directory list structure.  If the caller
 *	passes other than PLENTY_SPACE or SOFT_SPACE, the caller should
 *	ignore the return value.  Otherwise, 0 = less than the
 *	requested space is available, 1 = at least the requested space
 *	is available.
 *
 *	log_mutex must be held by the caller
 *
 *	-1 is returned if stat fails
 *
 * IGNORE_SIZE is one page (Sol 9 / 10 timeframe) and is the default
 * buffer size written for Sol 9 and earlier.  To keep the same accuracy
 * for the soft limit check as before, spacecheck checks for space
 * remaining IGNORE_SIZE bytes.  This reduces the number of statvfs()
 * calls and related math.
 *
 * globals -
 *	minfree - the soft limit, i.e., the % of filesystem to reserve
 */
static int
spacecheck(dirlist_t *thisdir, int test_limit, size_t next_buf_size)
{
	struct statvfs	sb;
	static int	ignore_size = 0;

	ignore_size += next_buf_size;

	if ((test_limit == PLENTY_SPACE) && (ignore_size < IGNORE_SIZE))
		return (1);

	assert(thisdir != NULL);

	if (statvfs(thisdir->dl_dirname, &sb) < 0) {
		thisdir->dl_space = SPACE_FULL;
		minfreeblocks = AVAIL_MIN;
		return (-1);
	} else {
		minfreeblocks = ((minfree * sb.f_blocks) / 100) + AVAIL_MIN;

		if (sb.f_bavail < AVAIL_MIN)
			thisdir->dl_space = SPACE_FULL;
		else if (sb.f_bavail > minfreeblocks) {
			thisdir->dl_space = fullness_state = PLENTY_SPACE;
			ignore_size = 0;
		} else
			thisdir->dl_space = SOFT_SPACE;
	}
	if (thisdir->dl_space == PLENTY_SPACE)
		return (1);

	return (thisdir->dl_space == test_limit);
}

/*
 * Parses p_fsize value and contains it within the range FSIZE_MIN and
 * INT_MAX so using uints won't cause an undetected overflow of
 * INT_MAX.  Defaults to 0 if the value is invalid or is missing.
 */
static void
save_maxsize(char *maxsize) {
	/*
	 * strtol() returns a long which could be larger than int so
	 * store here for sanity checking first
	 */
	long proposed_maxsize;

	if (maxsize != NULL) {
		/*
		 * There is no explicit error return from strtol() so
		 * we may need to depend on the value of errno.
		 */
		errno = 0;
		proposed_maxsize = strtol(maxsize, (char **)NULL, 10);

		/*
		 * If sizeof(long) is greater than sizeof(int) on this
		 * platform, proposed_maxsize might be greater than
		 * INT_MAX without it being reported as ERANGE.
		 */
		if ((errno == ERANGE) ||
		    ((proposed_maxsize != 0) &&
			(proposed_maxsize < FSIZE_MIN)) ||
		    (proposed_maxsize > INT_MAX)) {
			binfile_maxsize = 0;
			DPRINT((dbfp, "binfile: p_fsize parameter out of "
					"range: %s\n", maxsize));
			/*
			 * Inform administrator of the error via
			 * syslog
			 */
			__audit_syslog("audit_binfile.so",
			    LOG_CONS | LOG_NDELAY,
			    LOG_DAEMON, LOG_ERR,
			    gettext("p_fsize parameter out of range\n"));
		} else {
			binfile_maxsize = proposed_maxsize;
		}
	} else { /* p_fsize string was not present */
		binfile_maxsize = 0;
	}

	DPRINT((dbfp, "binfile: set maxsize to %d\n", binfile_maxsize));
}

/*
 * auditd_plugin() writes a buffer to the currently open file. The
 * global "openNewFile" is used to force a new log file for cases such
 * as the initial open, when minfree is reached, the p_fsize value is
 * exceeded or the current file system fills up, and "audit -s" with
 * changed parameters.  For "audit -n" a new log file is opened
 * immediately in auditd_plugin_open().
 *
 * This function manages one or more audit directories as follows:
 *
 * 	If the current open file is in a directory that has not
 *	reached the soft limit, write the input data and return.
 *
 *	Scan the list of directories for one which has not reached
 *	the soft limit; if one is found, write and return.  Such
 *	a writable directory is in "PLENTY_SPACE" state.
 *
 *	Scan the list of directories for one which has not reached
 *	the hard limit; if one is found, write and return.  This
 *	directory in in "SOFT_SPACE" state.
 *
 * Oh, and if a write fails, handle it like a hard space limit.
 *
 * audit_warn (via __audit_dowarn()) is used to alert an operator
 * at various levels of fullness.
 */
/* ARGSUSED */
auditd_rc_t
auditd_plugin(const char *input, size_t in_len, uint64_t sequence, char **error)
{
	auditd_rc_t	rc = AUDITD_FAIL;
	int		open_status;
	size_t		out_len;
	/* avoid excess audit_warnage */
	static int	allsoftfull_warning = 0;
	static int	allhard_pause = 0;
	static struct timeval	next_allhard;
	struct timeval	now;
#if DEBUG
	int		statrc;
	static char	*last_file_written_to = NULL;
	static uint64_t	last_sequence = 0;
	static uint64_t	write_count = 0;

	if ((last_sequence > 0) && (sequence != last_sequence + 1))
		(void) fprintf(dbfp,
		    "binfile: buffer sequence=%llu but prev=%llu=n",
		    sequence, last_sequence);
	last_sequence = sequence;

	(void) fprintf(dbfp, "binfile: input seq=%llu, len=%d\n",
	    sequence, in_len);
#endif
	*error = NULL;
	/*
	 * lock is for activeDir, referenced by open_log() and close_log()
	 */
	(void) pthread_mutex_lock(&log_mutex);

	/*
	 * If this would take us over the maximum size, open a new
	 * file, unless maxsize is 0, in which case growth of the
	 * audit log is unrestricted.
	 */
	if ((binfile_maxsize != 0) &&
	    ((binfile_cursize + in_len) > binfile_maxsize)) {
		DPRINT((dbfp, "binfile: maxsize exceeded, opening new audit "
		    "file.\n"));
		openNewFile = 1;
	}

	while (rc == AUDITD_FAIL) {
		open_status = 1;
		if (openNewFile) {
			open_status = open_log(activeDir);
			if (open_status == 1)	/* ok */
				openNewFile = 0;
		}
		/*
		 * consider "space ok" return and error return the same;
		 * a -1 means spacecheck couldn't check for space.
		 */
#if !DEBUG
		if ((open_status == 1) &&
		    (spacecheck(activeDir, fullness_state, in_len) != 0)) {
#else
		if ((open_status == 1) &&
		    (statrc = spacecheck(activeDir, fullness_state,
		    in_len) != 0)) {
			DPRINT((dbfp, "binfile: returned from spacecheck\n"));
			/*
			 * The last copy of last_file_written_to is
			 * never free'd, so there will be one open
			 * memory reference on exit.  It's debug only.
			 */
			if ((last_file_written_to != NULL) &&
			    (strcmp(last_file_written_to,
			    activeDir->dl_filename) != 0)) {
				DPRINT((dbfp, "binfile:  now writing to %s\n",
				    activeDir->dl_filename));
				free(last_file_written_to);
			}
			DPRINT((dbfp, "binfile:  finished some debug stuff\n"));
			last_file_written_to =
			    strdup(activeDir->dl_filename);
#endif
			out_len = write(activeDir->dl_fd, input, in_len);
			DPRINT((dbfp, "binfile:  finished the write\n"));

			binfile_cursize += out_len;

			if (out_len == in_len) {
				DPRINT((dbfp,
				    "binfile: write_count=%llu, sequence=%llu,"
				    " l=%u\n",
				    ++write_count, sequence, out_len));
				allsoftfull_warning = 0;
				activeDir->dl_flags = 0;

				rc = AUDITD_SUCCESS;
				break;
			} else if (!(activeDir->dl_flags & HARD_WARNED)) {
				DPRINT((dbfp,
				    "binfile: write failed, sequence=%llu, "
				    "l=%u\n", sequence, out_len));
				DPRINT((dbfp, "hard warning sent.\n"));
				__audit_dowarn("hard", activeDir->dl_dirname,
				    0);

				activeDir->dl_flags |= HARD_WARNED;
			}
		} else {
			DPRINT((dbfp, "binfile: statrc=%d, fullness_state=%d\n",
			    statrc, fullness_state));
			if (!(activeDir->dl_flags & SOFT_WARNED) &&
			    (activeDir->dl_space == SOFT_SPACE)) {
				DPRINT((dbfp, "soft warning sent\n"));
				__audit_dowarn("soft",
				    activeDir->dl_dirname, 0);
				activeDir->dl_flags |= SOFT_WARNED;
			}
			if (!(activeDir->dl_flags & HARD_WARNED) &&
			    (activeDir->dl_space == SPACE_FULL)) {
				DPRINT((dbfp, "hard warning sent.\n"));
				__audit_dowarn("hard",
				    activeDir->dl_dirname, 0);
				activeDir->dl_flags |= HARD_WARNED;
			}
		}
		DPRINT((dbfp, "binfile: activeDir=%s, next=%s\n",
		    activeDir->dl_dirname, activeDir->dl_next->dl_dirname));

		activeDir = activeDir->dl_next;
		openNewFile = 1;

		if (activeDir == startdir) {		/* full circle */
			if (fullness_state == PLENTY_SPACE) {	/* once */
				fullness_state = SOFT_SPACE;
				if (allsoftfull_warning == 0) {
					allsoftfull_warning++;
					__audit_dowarn("allsoft", "", 0);
				}
			} else {			/* full circle twice */
				if ((hung_count > 0) && !allhard_pause) {
					allhard_pause = 1;
					(void) gettimeofday(&next_allhard,
					    NULL);
					next_allhard.tv_sec += ALLHARD_DELAY;
				}

				if (allhard_pause) {
					(void) gettimeofday(&now, NULL);
					if (now.tv_sec >= next_allhard.tv_sec) {
						allhard_pause = 0;
						__audit_dowarn("allhard", "",
						    ++hung_count);
					}
				} else {
					__audit_dowarn("allhard", "",
					    ++hung_count);
				}
				minfreeblocks = AVAIL_MIN;
				rc = AUDITD_RETRY;
				*error = strdup(gettext(
				    "all partitions full\n"));
				(void) __logpost("");
			}
		}
	}
	(void) pthread_mutex_unlock(&log_mutex);

	return (rc);
}


/*
 * It may be called multiple times as auditd handles SIGHUP and SIGUSR1
 * corresponding to the audit(1M) flags -s and -n
 *
 * kvlist is NULL only if auditd caught a SIGUSR1 (audit -n), so after the first
 * time open is called; the reason is -s if kvlist != NULL and -n otherwise.
 *
 */
auditd_rc_t
auditd_plugin_open(const kva_t *kvlist, char **ret_list, char **error)
{
	int		rc = 0;
	int		status;
	int		reason;
	char		*dirlist;
	char		*minfree;
	char		*maxsize;
	kva_t		*kv;

	*error = NULL;
	*ret_list = NULL;
	kv = (kva_t *)kvlist;

	if (am_open) {
		if (kvlist == NULL)
			reason = 1;	/* audit -n */
		else
			reason = 2;	/* audit -s */
	} else {
		reason = 0;		/* initial open */
#if DEBUG
		dbfp = __auditd_debug_file_open();
#endif
	}
	DPRINT((dbfp, "binfile: am_open=%d, reason=%d\n", am_open, reason));

	am_open = 1;

	if (kvlist == NULL) {
		dirlist = NULL;
		minfree = NULL;
		maxsize = NULL;
	} else {
		dirlist = kva_match(kv, "p_dir");
		minfree = kva_match(kv, "p_minfree");
		maxsize = kva_match(kv, "p_fsize");
	}
	switch (reason) {
	case 0:			/* initial open */
		if (!binfile_is_open)
			(void) pthread_mutex_init(&log_mutex, NULL);
		binfile_is_open = 1;
		openNewFile = 1;
		/* FALLTHRU */
	case 2:			/* audit -s */
		/* handle p_fsize parameter */
		save_maxsize(maxsize);

		fullness_state = PLENTY_SPACE;
		status = loadauditlist(dirlist, minfree);

		if (status == -1) {
			(void) __logpost("");
			*error = strdup(gettext("no directories configured"));
			return (AUDITD_RETRY);
		} else if (status == AUDITD_NO_MEMORY) {
			(void) __logpost("");
			*error = strdup(gettext("no memory"));
			return (status);
		} else {	/* status is 0 or -2 (no change or changed) */
			hung_count = 0;
			DPRINT((dbfp, "binfile: loadauditlist returned %d\n",
			    status));
		}
		break;
	case 1:			/* audit -n */
		(void) pthread_mutex_lock(&log_mutex);
		if (open_log(activeDir) == 1)	/* ok */
			openNewFile = 0;
		(void) pthread_mutex_unlock(&log_mutex);
		break;
	}

	rc = AUDITD_SUCCESS;
	*ret_list = NULL;

	return (rc);
}

auditd_rc_t
auditd_plugin_close(char **error)
{
	*error = NULL;

	(void) pthread_mutex_lock(&log_mutex);
	close_log(&lastOpenDir, "", "");
	freedirlist(activeDir);
	activeDir = NULL;
	(void) pthread_mutex_unlock(&log_mutex);

	DPRINT((dbfp, "binfile:  closed\n"));

	(void) __logpost("");

	if (binfile_is_open) {
		(void) pthread_mutex_destroy(&log_mutex);
		binfile_is_open = 0;
#if DEBUG
	} else {
		(void) fprintf(dbfp,
		    "auditd_plugin_close() called when already closed.");
#endif
	}
	am_open = 0;
	return (AUDITD_SUCCESS);
}