1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21
22 /*
23 * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright 2014 Nexenta Systems, Inc. All rights reserved.
25 */
26
27 /*
28 * SMB: locking_andx
29 *
30 * SMB_COM_LOCKING_ANDX allows both locking and/or unlocking of file range(s).
31 *
32 * Client Request Description
33 * ================================== =================================
34 *
35 * UCHAR WordCount; Count of parameter words = 8
36 * UCHAR AndXCommand; Secondary (X) command; 0xFF = none
37 * UCHAR AndXReserved; Reserved (must be 0)
38 * USHORT AndXOffset; Offset to next command WordCount
39 * USHORT Fid; File handle
40 * UCHAR LockType; See LockType table below
41 * UCHAR OplockLevel; The new oplock level
42 * ULONG Timeout; Milliseconds to wait for unlock
43 * USHORT NumberOfUnlocks; Num. unlock range structs following
44 * USHORT NumberOfLocks; Num. lock range structs following
45 * USHORT ByteCount; Count of data bytes
46 * LOCKING_ANDX_RANGE Unlocks[]; Unlock ranges
47 * LOCKING_ANDX_RANGE Locks[]; Lock ranges
48 *
49 * LockType Flag Name Value Description
50 * ============================ ===== ================================
51 *
52 * LOCKING_ANDX_SHARED_LOCK 0x01 Read-only lock
53 * LOCKING_ANDX_OPLOCK_RELEASE 0x02 Oplock break notification
54 * LOCKING_ANDX_CHANGE_LOCKTYPE 0x04 Change lock type
55 * LOCKING_ANDX_CANCEL_LOCK 0x08 Cancel outstanding request
56 * LOCKING_ANDX_LARGE_FILES 0x10 Large file locking format
57 *
58 * LOCKING_ANDX_RANGE Format
59 * =====================================================================
60 *
61 * USHORT Pid; PID of process "owning" lock
62 * ULONG Offset; Offset to bytes to [un]lock
63 * ULONG Length; Number of bytes to [un]lock
64 *
65 * Large File LOCKING_ANDX_RANGE Format
66 * =====================================================================
67 *
68 * USHORT Pid; PID of process "owning" lock
69 * USHORT Pad; Pad to DWORD align (mbz)
70 * ULONG OffsetHigh; Offset to bytes to [un]lock
71 * (high)
72 * ULONG OffsetLow; Offset to bytes to [un]lock (low)
73 * ULONG LengthHigh; Number of bytes to [un]lock
74 * (high)
75 * ULONG LengthLow; Number of bytes to [un]lock (low)
76 *
77 * Server Response Description
78 * ================================== =================================
79 *
80 * UCHAR WordCount; Count of parameter words = 2
81 * UCHAR AndXCommand; Secondary (X) command; 0xFF =
82 * none
83 * UCHAR AndXReserved; Reserved (must be 0)
84 * USHORT AndXOffset; Offset to next command WordCount
85 * USHORT ByteCount; Count of data bytes = 0
86 *
87 * Locking is a simple mechanism for excluding other processes read/write
88 * access to regions of a file. The locked regions can be anywhere in the
89 * logical file. Locking beyond end-of-file is permitted. Any process
90 * using the Fid specified in this request's Fid has access to the locked
91 * bytes, other processes will be denied the locking of the same bytes.
92 *
93 * The proper method for using locks is not to rely on being denied read or
94 * write access on any of the read/write protocols but rather to attempt
95 * the locking protocol and proceed with the read/write only if the locks
96 * succeeded.
97 *
98 * Locking a range of bytes will fail if any subranges or overlapping
99 * ranges are locked. In other words, if any of the specified bytes are
100 * already locked, the lock will fail.
101 *
102 * If NumberOfUnlocks is non-zero, the Unlocks vector contains
103 * NumberOfUnlocks elements. Each element requests that a lock at Offset
104 * of Length be released. If NumberOfLocks is nonzero, the Locks vector
105 * contains NumberOfLocks elements. Each element requests the acquisition
106 * of a lock at Offset of Length.
107 *
108 * Timeout is the maximum amount of time to wait for the byte range(s)
109 * specified to become unlocked. A timeout value of 0 indicates that the
110 * server should fail immediately if any lock range specified is locked. A
111 *
112 * timeout value of -1 indicates that the server should wait as long as it
113 * takes for each byte range specified to become unlocked so that it may be
114 * again locked by this protocol. Any other value of smb_timeout specifies
115 * the maximum number of milliseconds to wait for all lock range(s)
116 * specified to become available.
117 *
118 * If any of the lock ranges timeout because of the area to be locked is
119 * already locked (or the lock fails), the other ranges in the protocol
120 * request which were successfully locked as a result of this protocol will
121 * be unlocked (either all requested ranges will be locked when this
122 * protocol returns to the client or none).
123 *
124 * If LockType has the LOCKING_ANDX_SHARED_LOCK flag set, the lock is
125 * specified as a shared lock. Locks for both read and write (where
126 * LOCKING_ANDX_SHARED_LOCK is clear) should be prohibited, but other
127 * shared locks should be permitted. If shared locks can not be supported
128 * by a server, the server should map the lock to a lock for both read and
129 * write. Closing a file with locks still in force causes the locks to be
130 * released in no defined order.
131 *
132 * If LockType has the LOCKING_ANDX_LARGE_FILES flag set and if the
133 * negotiated protocol is NT LM 0.12 or later, then the Locks and Unlocks
134 * vectors are in the Large File LOCKING_ANDX_RANGE format. This allows
135 * specification of 64 bit offsets for very large files.
136 *
137 * If the one and only member of the Locks vector has the
138 * LOCKING_ANDX_CANCEL_LOCK flag set in the LockType field, the client is
139 * requesting the server to cancel a previously requested, but not yet
140 * responded to, lock.
141 *
142 * If LockType has the LOCKING_ANDX_CHANGE_LOCKTYPE flag set, the client is
143 * requesting that the server atomically change the lock type from a shared
144 * lock to an exclusive lock or vice versa. If the server can not do this
145 * in an atomic fashion, the server must reject this request. NT and W95
146 * servers do not support this capability.
147 *
148 * Oplocks are described in the "Opportunistic Locks" section elsewhere in
149 * this document. A client requests an oplock by setting the appropriate
150 * bit in the SMB_COM_OPEN_ANDX request when the file is being opened in a
151 * mode which is not exclusive. The server responds by setting the
152 * appropriate bit in the response SMB indicating whether or not the oplock
153 * was granted. By granting the oplock, the server tells the client the
154 * file is currently only being used by this one client process at the
155 * current time. The client can therefore safely do read ahead and write
156 * behind as well as local caching of file locks knowing that the file will
157 * not be accessed/changed in any way by another process while the oplock
158 * is in effect. The client will be notified when any other process
159 * attempts to open or modify the oplocked file.
160 *
161 * When another user attempts to open or otherwise modify the file which a
162 * client has oplocked, the server delays the second attempt and notifies
163 * the client via an SMB_LOCKING_ANDX SMB asynchronously sent from the
164 * server to the client. This message has the LOCKING_ANDX_OPLOCK_RELEASE
165 * flag set indicating to the client that the oplock is being broken.
166 *
167 * OplockLevel indicates the type of oplock the client now owns. If
168 * OplockLevel is 0, the client possesses no oplocks on the file at all, if
169 * OplockLevel is 1 the client possesses a Level II oplock. The client is
170 * expected to flush any dirty buffers to the server, submit any file locks
171 * and respond to the server with either an SMB_LOCKING_ANDX SMB having the
172 * LOCKING_ANDX_OPLOCK_RELEASE flag set, or with a file close if the file
173 * is no longer in use by the client. If the client sends an
174 * SMB_LOCKING_ANDX SMB with the LOCKING_ANDX_OPLOCK_RELEASE flag set and
175 * NumberOfLocks is zero, the server does not send a response. Since a
176 * close being sent to the server and break oplock notification from the
177 * server could cross on the wire, if the client gets an oplock
178 * notification on a file which it does not have open, that notification
179 * should be ignored.
180 *
181 * Due to timing, the client could get an "oplock broken" notification in a
182 * user's data buffer as a result of this notification crossing on the wire
183 * with a SMB_COM_READ_RAW request. The client must detect this (use
184 * length of msg, "FFSMB", MID of -1 and Command of SMB_COM_LOCKING_ANDX)
185 * and honor the "oplock broken" notification as usual. The server must
186 * also note on receipt of an SMB_COM_READ_RAW request that there is an
187 * outstanding (unanswered) "oplock broken" notification to the client and
188 * return a zero length response denoting failure of the read raw request.
189 * The client should (after responding to the "oplock broken"
190 * notification), use a standard read protocol to redo the read request.
191 * This allows a file to actually contain data matching an "oplock broken"
192 * notification and still be read correctly.
193 *
194 * The entire message sent and received including the optional second
195 * protocol must fit in the negotiated maximum transfer size. The
196 * following are the only valid SMB commands for AndXCommand for
197 * SMB_COM_LOCKING_ANDX:
198 *
199 * SMB_COM_READ SMB_COM_READ_ANDX
200 * SMB_COM_WRITE SMB_COM_WRITE_ANDX
201 * SMB_COM_FLUSH
202 *
203 * 4.2.6.1 Errors
204 *
205 * ERRDOS/ERRbadfile
206 * ERRDOS/ERRbadfid
207 * ERRDOS/ERRlock
208 * ERRDOS/ERRinvdevice
209 * ERRSRV/ERRinvid
210 * ERRSRV/ERRbaduid
211 */
212
213 #include <smbsrv/smb_kproto.h>
214
215 smb_sdrc_t
smb_pre_locking_andx(smb_request_t * sr)216 smb_pre_locking_andx(smb_request_t *sr)
217 {
218 DTRACE_SMB_1(op__LockingX__start, smb_request_t *, sr);
219 return (SDRC_SUCCESS);
220 }
221
222 void
smb_post_locking_andx(smb_request_t * sr)223 smb_post_locking_andx(smb_request_t *sr)
224 {
225 DTRACE_SMB_1(op__LockingX__done, smb_request_t *, sr);
226 }
227
228 smb_sdrc_t
smb_com_locking_andx(smb_request_t * sr)229 smb_com_locking_andx(smb_request_t *sr)
230 {
231 unsigned short i;
232 unsigned char lock_type; /* See lock_type table above */
233 unsigned char oplock_level; /* The new oplock level */
234 uint32_t timeout; /* Milliseconds to wait for lock */
235 unsigned short unlock_num; /* # unlock range structs */
236 unsigned short lock_num; /* # lock range structs */
237 uint32_t save_pid; /* Process Id of owner */
238 uint32_t offset32, length32;
239 uint64_t offset64;
240 uint64_t length64;
241 DWORD result;
242 int rc;
243 uint32_t ltype;
244 smb_ofile_t *ofile;
245 uint16_t tmp_pid; /* locking uses 16-bit pids */
246 uint8_t brk;
247
248 rc = smbsr_decode_vwv(sr, "4.wbblww", &sr->smb_fid, &lock_type,
249 &oplock_level, &timeout, &unlock_num, &lock_num);
250 if (rc != 0)
251 return (SDRC_ERROR);
252
253 smbsr_lookup_file(sr);
254 if (sr->fid_ofile == NULL) {
255 smbsr_error(sr, NT_STATUS_INVALID_HANDLE, ERRDOS, ERRbadfid);
256 return (SDRC_ERROR);
257 }
258 ofile = sr->fid_ofile;
259 if (ofile->f_node == NULL) {
260 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER,
261 ERRDOS, ERROR_INVALID_PARAMETER);
262 return (SDRC_ERROR);
263 }
264
265 if (lock_type & LOCKING_ANDX_SHARED_LOCK)
266 ltype = SMB_LOCK_TYPE_READONLY;
267 else
268 ltype = SMB_LOCK_TYPE_READWRITE;
269
270 save_pid = sr->smb_pid; /* Save the original pid */
271
272 if (lock_type & LOCKING_ANDX_OPLOCK_RELEASE) {
273 if (oplock_level == 0)
274 brk = SMB_OPLOCK_BREAK_TO_NONE;
275 else
276 brk = SMB_OPLOCK_BREAK_TO_LEVEL_II;
277 smb_oplock_ack(ofile->f_node, ofile, brk);
278 if (unlock_num == 0 && lock_num == 0)
279 return (SDRC_NO_REPLY);
280 }
281
282 /*
283 * No support for changing locktype (although we could probably
284 * implement this)
285 */
286 if (lock_type & LOCKING_ANDX_CHANGE_LOCK_TYPE) {
287 smbsr_error(sr, 0, ERRDOS,
288 ERROR_ATOMIC_LOCKS_NOT_SUPPORTED);
289 return (SDRC_ERROR);
290 }
291
292 /*
293 * No support for cancel lock (smbtorture expects this)
294 */
295 if (lock_type & LOCKING_ANDX_CANCEL_LOCK) {
296 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER,
297 ERRDOS, ERROR_INVALID_PARAMETER);
298 return (SDRC_ERROR);
299 }
300
301 if (lock_type & LOCKING_ANDX_LARGE_FILES) {
302 /*
303 * negotiated protocol should be NT LM 0.12 or later
304 */
305 if (sr->session->dialect < NT_LM_0_12) {
306 smbsr_error(sr, NT_STATUS_INVALID_PARAMETER,
307 ERRDOS, ERROR_INVALID_PARAMETER);
308 return (SDRC_ERROR);
309 }
310
311 for (i = 0; i < unlock_num; i++) {
312 rc = smb_mbc_decodef(&sr->smb_data, "w2.QQ",
313 &tmp_pid, &offset64, &length64);
314 if (rc) {
315 /*
316 * This is the error returned by Windows 2000
317 * even when STATUS32 has been negotiated.
318 */
319 smbsr_error(sr, 0, ERRSRV, ERRerror);
320 return (SDRC_ERROR);
321 }
322 sr->smb_pid = tmp_pid; /* NB: 16-bit */
323
324 result = smb_unlock_range(sr, sr->fid_ofile->f_node,
325 offset64, length64);
326 if (result != NT_STATUS_SUCCESS) {
327 smbsr_error(sr, NT_STATUS_RANGE_NOT_LOCKED,
328 ERRDOS, ERROR_NOT_LOCKED);
329 return (SDRC_ERROR);
330 }
331 }
332
333 for (i = 0; i < lock_num; i++) {
334 rc = smb_mbc_decodef(&sr->smb_data, "w2.QQ",
335 &tmp_pid, &offset64, &length64);
336 if (rc) {
337 smbsr_error(sr, 0, ERRSRV, ERRerror);
338 return (SDRC_ERROR);
339 }
340 sr->smb_pid = tmp_pid; /* NB: 16-bit */
341
342 result = smb_lock_range(sr, offset64, length64, timeout,
343 ltype);
344 if (result != NT_STATUS_SUCCESS) {
345 smb_lock_range_error(sr, result);
346 return (SDRC_ERROR);
347 }
348 }
349 } else {
350 for (i = 0; i < unlock_num; i++) {
351 rc = smb_mbc_decodef(&sr->smb_data, "wll", &tmp_pid,
352 &offset32, &length32);
353 if (rc) {
354 smbsr_error(sr, 0, ERRSRV, ERRerror);
355 return (SDRC_ERROR);
356 }
357 sr->smb_pid = tmp_pid; /* NB: 16-bit */
358
359 result = smb_unlock_range(sr, sr->fid_ofile->f_node,
360 (uint64_t)offset32, (uint64_t)length32);
361 if (result != NT_STATUS_SUCCESS) {
362 smbsr_error(sr, NT_STATUS_RANGE_NOT_LOCKED,
363 ERRDOS, ERROR_NOT_LOCKED);
364 return (SDRC_ERROR);
365 }
366 }
367
368 for (i = 0; i < lock_num; i++) {
369 rc = smb_mbc_decodef(&sr->smb_data, "wll", &tmp_pid,
370 &offset32, &length32);
371 if (rc) {
372 smbsr_error(sr, 0, ERRSRV, ERRerror);
373 return (SDRC_ERROR);
374 }
375 sr->smb_pid = tmp_pid; /* NB: 16-bit */
376
377 result = smb_lock_range(sr, (uint64_t)offset32,
378 (uint64_t)length32, timeout, ltype);
379 if (result != NT_STATUS_SUCCESS) {
380 smb_lock_range_error(sr, result);
381 return (SDRC_ERROR);
382 }
383 }
384 }
385
386 sr->smb_pid = save_pid;
387 if (smbsr_encode_result(sr, 2, 0, "bb.ww", 2, sr->andx_com, 7, 0))
388 return (SDRC_ERROR);
389 return (SDRC_SUCCESS);
390 }
391
392 /*
393 * Compose an SMB1 Oplock Break Notification packet, including
394 * the SMB1 header and everything, in sr->reply.
395 * The caller will send it and free the request.
396 */
397 void
smb1_oplock_break_notification(smb_request_t * sr,uint8_t brk)398 smb1_oplock_break_notification(smb_request_t *sr, uint8_t brk)
399 {
400 smb_ofile_t *ofile = sr->fid_ofile;
401 uint16_t fid;
402 uint8_t lock_type;
403 uint8_t oplock_level;
404
405 switch (brk) {
406 default:
407 ASSERT(0);
408 /* FALLTHROUGH */
409 case SMB_OPLOCK_BREAK_TO_NONE:
410 oplock_level = 0;
411 break;
412 case SMB_OPLOCK_BREAK_TO_LEVEL_II:
413 oplock_level = 1;
414 break;
415 }
416
417 sr->smb_com = SMB_COM_LOCKING_ANDX;
418 sr->smb_tid = ofile->f_tree->t_tid;
419 sr->smb_pid = 0xFFFF;
420 sr->smb_uid = 0;
421 sr->smb_mid = 0xFFFF;
422 fid = ofile->f_fid;
423 lock_type = LOCKING_ANDX_OPLOCK_RELEASE;
424
425 (void) smb_mbc_encodef(
426 &sr->reply, "Mb19.wwwwbb3.wbb10.",
427 /* "\xffSMB" M */
428 sr->smb_com, /* b */
429 /* status, flags, signature 19. */
430 sr->smb_tid, /* w */
431 sr->smb_pid, /* w */
432 sr->smb_uid, /* w */
433 sr->smb_mid, /* w */
434 8, /* word count b */
435 0xFF, /* AndX cmd b */
436 /* AndX reserved, offset 3. */
437 fid,
438 lock_type,
439 oplock_level);
440 }
441