xref: /linux/drivers/net/ethernet/seeq/sgiseeq.c (revision 0ea5c948cb64bab5bc7a5516774eb8536f05aa0d)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * sgiseeq.c: Seeq8003 ethernet driver for SGI machines.
4  *
5  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
6  */
7 
8 #undef DEBUG
9 
10 #include <linux/dma-mapping.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/errno.h>
15 #include <linux/types.h>
16 #include <linux/interrupt.h>
17 #include <linux/string.h>
18 #include <linux/delay.h>
19 #include <linux/netdevice.h>
20 #include <linux/platform_device.h>
21 #include <linux/etherdevice.h>
22 #include <linux/skbuff.h>
23 
24 #include <asm/sgi/hpc3.h>
25 #include <asm/sgi/ip22.h>
26 #include <asm/sgi/seeq.h>
27 
28 #include "sgiseeq.h"
29 
30 static char *sgiseeqstr = "SGI Seeq8003";
31 
32 /*
33  * If you want speed, you do something silly, it always has worked for me.  So,
34  * with that in mind, I've decided to make this driver look completely like a
35  * stupid Lance from a driver architecture perspective.  Only difference is that
36  * here our "ring buffer" looks and acts like a real Lance one does but is
37  * laid out like how the HPC DMA and the Seeq want it to.  You'd be surprised
38  * how a stupid idea like this can pay off in performance, not to mention
39  * making this driver 2,000 times easier to write. ;-)
40  */
41 
42 /* Tune these if we tend to run out often etc. */
43 #define SEEQ_RX_BUFFERS  16
44 #define SEEQ_TX_BUFFERS  16
45 
46 #define PKT_BUF_SZ       1584
47 
48 #define NEXT_RX(i)  (((i) + 1) & (SEEQ_RX_BUFFERS - 1))
49 #define NEXT_TX(i)  (((i) + 1) & (SEEQ_TX_BUFFERS - 1))
50 #define PREV_RX(i)  (((i) - 1) & (SEEQ_RX_BUFFERS - 1))
51 #define PREV_TX(i)  (((i) - 1) & (SEEQ_TX_BUFFERS - 1))
52 
53 #define TX_BUFFS_AVAIL(sp) ((sp->tx_old <= sp->tx_new) ? \
54 			    sp->tx_old + (SEEQ_TX_BUFFERS - 1) - sp->tx_new : \
55 			    sp->tx_old - sp->tx_new - 1)
56 
57 #define VIRT_TO_DMA(sp, v) ((sp)->srings_dma +                                 \
58 				  (dma_addr_t)((unsigned long)(v) -            \
59 					       (unsigned long)((sp)->rx_desc)))
60 
61 /* Copy frames shorter than rx_copybreak, otherwise pass on up in
62  * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
63  */
64 static int rx_copybreak = 100;
65 
66 #define PAD_SIZE    (128 - sizeof(struct hpc_dma_desc) - sizeof(void *))
67 
68 struct sgiseeq_rx_desc {
69 	volatile struct hpc_dma_desc rdma;
70 	u8 padding[PAD_SIZE];
71 	struct sk_buff *skb;
72 };
73 
74 struct sgiseeq_tx_desc {
75 	volatile struct hpc_dma_desc tdma;
76 	u8 padding[PAD_SIZE];
77 	struct sk_buff *skb;
78 };
79 
80 /*
81  * Warning: This structure is laid out in a certain way because HPC dma
82  *          descriptors must be 8-byte aligned.  So don't touch this without
83  *          some care.
84  */
85 struct sgiseeq_init_block { /* Note the name ;-) */
86 	struct sgiseeq_rx_desc rxvector[SEEQ_RX_BUFFERS];
87 	struct sgiseeq_tx_desc txvector[SEEQ_TX_BUFFERS];
88 };
89 
90 struct sgiseeq_private {
91 	struct sgiseeq_init_block *srings;
92 	dma_addr_t srings_dma;
93 
94 	/* Ptrs to the descriptors in uncached space. */
95 	struct sgiseeq_rx_desc *rx_desc;
96 	struct sgiseeq_tx_desc *tx_desc;
97 
98 	char *name;
99 	struct hpc3_ethregs *hregs;
100 	struct sgiseeq_regs *sregs;
101 
102 	/* Ring entry counters. */
103 	unsigned int rx_new, tx_new;
104 	unsigned int rx_old, tx_old;
105 
106 	int is_edlc;
107 	unsigned char control;
108 	unsigned char mode;
109 
110 	spinlock_t tx_lock;
111 };
112 
dma_sync_desc_cpu(struct net_device * dev,void * addr)113 static inline void dma_sync_desc_cpu(struct net_device *dev, void *addr)
114 {
115 	struct sgiseeq_private *sp = netdev_priv(dev);
116 
117 	dma_sync_single_for_cpu(dev->dev.parent, VIRT_TO_DMA(sp, addr),
118 			sizeof(struct sgiseeq_rx_desc), DMA_BIDIRECTIONAL);
119 }
120 
dma_sync_desc_dev(struct net_device * dev,void * addr)121 static inline void dma_sync_desc_dev(struct net_device *dev, void *addr)
122 {
123 	struct sgiseeq_private *sp = netdev_priv(dev);
124 
125 	dma_sync_single_for_device(dev->dev.parent, VIRT_TO_DMA(sp, addr),
126 			sizeof(struct sgiseeq_rx_desc), DMA_BIDIRECTIONAL);
127 }
128 
hpc3_eth_reset(struct hpc3_ethregs * hregs)129 static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs)
130 {
131 	hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ;
132 	udelay(20);
133 	hregs->reset = 0;
134 }
135 
reset_hpc3_and_seeq(struct hpc3_ethregs * hregs,struct sgiseeq_regs * sregs)136 static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs,
137 				       struct sgiseeq_regs *sregs)
138 {
139 	hregs->rx_ctrl = hregs->tx_ctrl = 0;
140 	hpc3_eth_reset(hregs);
141 }
142 
143 #define RSTAT_GO_BITS (SEEQ_RCMD_IGOOD | SEEQ_RCMD_IEOF | SEEQ_RCMD_ISHORT | \
144 		       SEEQ_RCMD_IDRIB | SEEQ_RCMD_ICRC)
145 
seeq_go(struct sgiseeq_private * sp,struct hpc3_ethregs * hregs,struct sgiseeq_regs * sregs)146 static inline void seeq_go(struct sgiseeq_private *sp,
147 			   struct hpc3_ethregs *hregs,
148 			   struct sgiseeq_regs *sregs)
149 {
150 	sregs->rstat = sp->mode | RSTAT_GO_BITS;
151 	hregs->rx_ctrl = HPC3_ERXCTRL_ACTIVE;
152 }
153 
__sgiseeq_set_mac_address(struct net_device * dev)154 static inline void __sgiseeq_set_mac_address(struct net_device *dev)
155 {
156 	struct sgiseeq_private *sp = netdev_priv(dev);
157 	struct sgiseeq_regs *sregs = sp->sregs;
158 	int i;
159 
160 	sregs->tstat = SEEQ_TCMD_RB0;
161 	for (i = 0; i < 6; i++)
162 		sregs->rw.eth_addr[i] = dev->dev_addr[i];
163 }
164 
sgiseeq_set_mac_address(struct net_device * dev,void * addr)165 static int sgiseeq_set_mac_address(struct net_device *dev, void *addr)
166 {
167 	struct sgiseeq_private *sp = netdev_priv(dev);
168 	struct sockaddr *sa = addr;
169 
170 	eth_hw_addr_set(dev, sa->sa_data);
171 
172 	spin_lock_irq(&sp->tx_lock);
173 	__sgiseeq_set_mac_address(dev);
174 	spin_unlock_irq(&sp->tx_lock);
175 
176 	return 0;
177 }
178 
179 #define TCNTINFO_INIT (HPCDMA_EOX | HPCDMA_ETXD)
180 #define RCNTCFG_INIT  (HPCDMA_OWN | HPCDMA_EORP | HPCDMA_XIE)
181 #define RCNTINFO_INIT (RCNTCFG_INIT | (PKT_BUF_SZ & HPCDMA_BCNT))
182 
seeq_init_ring(struct net_device * dev)183 static int seeq_init_ring(struct net_device *dev)
184 {
185 	struct sgiseeq_private *sp = netdev_priv(dev);
186 	int i;
187 
188 	netif_stop_queue(dev);
189 	sp->rx_new = sp->tx_new = 0;
190 	sp->rx_old = sp->tx_old = 0;
191 
192 	__sgiseeq_set_mac_address(dev);
193 
194 	/* Setup tx ring. */
195 	for(i = 0; i < SEEQ_TX_BUFFERS; i++) {
196 		sp->tx_desc[i].tdma.cntinfo = TCNTINFO_INIT;
197 		dma_sync_desc_dev(dev, &sp->tx_desc[i]);
198 	}
199 
200 	/* And now the rx ring. */
201 	for (i = 0; i < SEEQ_RX_BUFFERS; i++) {
202 		if (!sp->rx_desc[i].skb) {
203 			dma_addr_t dma_addr;
204 			struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
205 
206 			if (skb == NULL)
207 				return -ENOMEM;
208 			skb_reserve(skb, 2);
209 			dma_addr = dma_map_single(dev->dev.parent,
210 						  skb->data - 2,
211 						  PKT_BUF_SZ, DMA_FROM_DEVICE);
212 			sp->rx_desc[i].skb = skb;
213 			sp->rx_desc[i].rdma.pbuf = dma_addr;
214 		}
215 		sp->rx_desc[i].rdma.cntinfo = RCNTINFO_INIT;
216 		dma_sync_desc_dev(dev, &sp->rx_desc[i]);
217 	}
218 	sp->rx_desc[i - 1].rdma.cntinfo |= HPCDMA_EOR;
219 	dma_sync_desc_dev(dev, &sp->rx_desc[i - 1]);
220 	return 0;
221 }
222 
seeq_purge_ring(struct net_device * dev)223 static void seeq_purge_ring(struct net_device *dev)
224 {
225 	struct sgiseeq_private *sp = netdev_priv(dev);
226 	int i;
227 
228 	/* clear tx ring. */
229 	for (i = 0; i < SEEQ_TX_BUFFERS; i++) {
230 		if (sp->tx_desc[i].skb) {
231 			dev_kfree_skb(sp->tx_desc[i].skb);
232 			sp->tx_desc[i].skb = NULL;
233 		}
234 	}
235 
236 	/* And now the rx ring. */
237 	for (i = 0; i < SEEQ_RX_BUFFERS; i++) {
238 		if (sp->rx_desc[i].skb) {
239 			dev_kfree_skb(sp->rx_desc[i].skb);
240 			sp->rx_desc[i].skb = NULL;
241 		}
242 	}
243 }
244 
245 #ifdef DEBUG
246 static struct sgiseeq_private *gpriv;
247 static struct net_device *gdev;
248 
sgiseeq_dump_rings(void)249 static void sgiseeq_dump_rings(void)
250 {
251 	static int once;
252 	struct sgiseeq_rx_desc *r = gpriv->rx_desc;
253 	struct sgiseeq_tx_desc *t = gpriv->tx_desc;
254 	struct hpc3_ethregs *hregs = gpriv->hregs;
255 	int i;
256 
257 	if (once)
258 		return;
259 	once++;
260 	printk("RING DUMP:\n");
261 	for (i = 0; i < SEEQ_RX_BUFFERS; i++) {
262 		printk("RX [%d]: @(%p) [%08x,%08x,%08x] ",
263 		       i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo,
264 		       r[i].rdma.pnext);
265 		i += 1;
266 		printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n",
267 		       i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo,
268 		       r[i].rdma.pnext);
269 	}
270 	for (i = 0; i < SEEQ_TX_BUFFERS; i++) {
271 		printk("TX [%d]: @(%p) [%08x,%08x,%08x] ",
272 		       i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo,
273 		       t[i].tdma.pnext);
274 		i += 1;
275 		printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n",
276 		       i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo,
277 		       t[i].tdma.pnext);
278 	}
279 	printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n",
280 	       gpriv->rx_new, gpriv->rx_old, gpriv->tx_new, gpriv->tx_old);
281 	printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n",
282 	       hregs->rx_cbptr, hregs->rx_ndptr, hregs->rx_ctrl);
283 	printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n",
284 	       hregs->tx_cbptr, hregs->tx_ndptr, hregs->tx_ctrl);
285 }
286 #endif
287 
288 #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF)
289 #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2)
290 
init_seeq(struct net_device * dev,struct sgiseeq_private * sp,struct sgiseeq_regs * sregs)291 static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp,
292 		     struct sgiseeq_regs *sregs)
293 {
294 	struct hpc3_ethregs *hregs = sp->hregs;
295 	int err;
296 
297 	reset_hpc3_and_seeq(hregs, sregs);
298 	err = seeq_init_ring(dev);
299 	if (err)
300 		return err;
301 
302 	/* Setup to field the proper interrupt types. */
303 	if (sp->is_edlc) {
304 		sregs->tstat = TSTAT_INIT_EDLC;
305 		sregs->rw.wregs.control = sp->control;
306 		sregs->rw.wregs.frame_gap = 0;
307 	} else {
308 		sregs->tstat = TSTAT_INIT_SEEQ;
309 	}
310 
311 	hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc);
312 	hregs->tx_ndptr = VIRT_TO_DMA(sp, sp->tx_desc);
313 
314 	seeq_go(sp, hregs, sregs);
315 	return 0;
316 }
317 
record_rx_errors(struct net_device * dev,unsigned char status)318 static void record_rx_errors(struct net_device *dev, unsigned char status)
319 {
320 	if (status & SEEQ_RSTAT_OVERF ||
321 	    status & SEEQ_RSTAT_SFRAME)
322 		dev->stats.rx_over_errors++;
323 	if (status & SEEQ_RSTAT_CERROR)
324 		dev->stats.rx_crc_errors++;
325 	if (status & SEEQ_RSTAT_DERROR)
326 		dev->stats.rx_frame_errors++;
327 	if (status & SEEQ_RSTAT_REOF)
328 		dev->stats.rx_errors++;
329 }
330 
rx_maybe_restart(struct sgiseeq_private * sp,struct hpc3_ethregs * hregs,struct sgiseeq_regs * sregs)331 static inline void rx_maybe_restart(struct sgiseeq_private *sp,
332 				    struct hpc3_ethregs *hregs,
333 				    struct sgiseeq_regs *sregs)
334 {
335 	if (!(hregs->rx_ctrl & HPC3_ERXCTRL_ACTIVE)) {
336 		hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc + sp->rx_new);
337 		seeq_go(sp, hregs, sregs);
338 	}
339 }
340 
sgiseeq_rx(struct net_device * dev,struct sgiseeq_private * sp,struct hpc3_ethregs * hregs,struct sgiseeq_regs * sregs)341 static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp,
342 			      struct hpc3_ethregs *hregs,
343 			      struct sgiseeq_regs *sregs)
344 {
345 	struct sgiseeq_rx_desc *rd;
346 	struct sk_buff *skb = NULL;
347 	struct sk_buff *newskb;
348 	unsigned char pkt_status;
349 	int len = 0;
350 	unsigned int orig_end = PREV_RX(sp->rx_new);
351 
352 	/* Service every received packet. */
353 	rd = &sp->rx_desc[sp->rx_new];
354 	dma_sync_desc_cpu(dev, rd);
355 	while (!(rd->rdma.cntinfo & HPCDMA_OWN)) {
356 		len = PKT_BUF_SZ - (rd->rdma.cntinfo & HPCDMA_BCNT) - 3;
357 		dma_unmap_single(dev->dev.parent, rd->rdma.pbuf,
358 				 PKT_BUF_SZ, DMA_FROM_DEVICE);
359 		pkt_status = rd->skb->data[len];
360 		if (pkt_status & SEEQ_RSTAT_FIG) {
361 			/* Packet is OK. */
362 			/* We don't want to receive our own packets */
363 			if (!ether_addr_equal(rd->skb->data + 6, dev->dev_addr)) {
364 				if (len > rx_copybreak) {
365 					skb = rd->skb;
366 					newskb = netdev_alloc_skb(dev, PKT_BUF_SZ);
367 					if (!newskb) {
368 						newskb = skb;
369 						skb = NULL;
370 						goto memory_squeeze;
371 					}
372 					skb_reserve(newskb, 2);
373 				} else {
374 					skb = netdev_alloc_skb_ip_align(dev, len);
375 					if (skb)
376 						skb_copy_to_linear_data(skb, rd->skb->data, len);
377 
378 					newskb = rd->skb;
379 				}
380 memory_squeeze:
381 				if (skb) {
382 					skb_put(skb, len);
383 					skb->protocol = eth_type_trans(skb, dev);
384 					netif_rx(skb);
385 					dev->stats.rx_packets++;
386 					dev->stats.rx_bytes += len;
387 				} else {
388 					dev->stats.rx_dropped++;
389 				}
390 			} else {
391 				/* Silently drop my own packets */
392 				newskb = rd->skb;
393 			}
394 		} else {
395 			record_rx_errors(dev, pkt_status);
396 			newskb = rd->skb;
397 		}
398 		rd->skb = newskb;
399 		rd->rdma.pbuf = dma_map_single(dev->dev.parent,
400 					       newskb->data - 2,
401 					       PKT_BUF_SZ, DMA_FROM_DEVICE);
402 
403 		/* Return the entry to the ring pool. */
404 		rd->rdma.cntinfo = RCNTINFO_INIT;
405 		sp->rx_new = NEXT_RX(sp->rx_new);
406 		dma_sync_desc_dev(dev, rd);
407 		rd = &sp->rx_desc[sp->rx_new];
408 		dma_sync_desc_cpu(dev, rd);
409 	}
410 	dma_sync_desc_dev(dev, rd);
411 
412 	dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]);
413 	sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR);
414 	dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]);
415 	dma_sync_desc_cpu(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]);
416 	sp->rx_desc[PREV_RX(sp->rx_new)].rdma.cntinfo |= HPCDMA_EOR;
417 	dma_sync_desc_dev(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]);
418 	rx_maybe_restart(sp, hregs, sregs);
419 }
420 
tx_maybe_reset_collisions(struct sgiseeq_private * sp,struct sgiseeq_regs * sregs)421 static inline void tx_maybe_reset_collisions(struct sgiseeq_private *sp,
422 					     struct sgiseeq_regs *sregs)
423 {
424 	if (sp->is_edlc) {
425 		sregs->rw.wregs.control = sp->control & ~(SEEQ_CTRL_XCNT);
426 		sregs->rw.wregs.control = sp->control;
427 	}
428 }
429 
kick_tx(struct net_device * dev,struct sgiseeq_private * sp,struct hpc3_ethregs * hregs)430 static inline void kick_tx(struct net_device *dev,
431 			   struct sgiseeq_private *sp,
432 			   struct hpc3_ethregs *hregs)
433 {
434 	struct sgiseeq_tx_desc *td;
435 	int i = sp->tx_old;
436 
437 	/* If the HPC aint doin nothin, and there are more packets
438 	 * with ETXD cleared and XIU set we must make very certain
439 	 * that we restart the HPC else we risk locking up the
440 	 * adapter.  The following code is only safe iff the HPCDMA
441 	 * is not active!
442 	 */
443 	td = &sp->tx_desc[i];
444 	dma_sync_desc_cpu(dev, td);
445 	while ((td->tdma.cntinfo & (HPCDMA_XIU | HPCDMA_ETXD)) ==
446 	      (HPCDMA_XIU | HPCDMA_ETXD)) {
447 		i = NEXT_TX(i);
448 		td = &sp->tx_desc[i];
449 		dma_sync_desc_cpu(dev, td);
450 	}
451 	if (td->tdma.cntinfo & HPCDMA_XIU) {
452 		dma_sync_desc_dev(dev, td);
453 		hregs->tx_ndptr = VIRT_TO_DMA(sp, td);
454 		hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE;
455 	}
456 }
457 
sgiseeq_tx(struct net_device * dev,struct sgiseeq_private * sp,struct hpc3_ethregs * hregs,struct sgiseeq_regs * sregs)458 static inline void sgiseeq_tx(struct net_device *dev, struct sgiseeq_private *sp,
459 			      struct hpc3_ethregs *hregs,
460 			      struct sgiseeq_regs *sregs)
461 {
462 	struct sgiseeq_tx_desc *td;
463 	unsigned long status = hregs->tx_ctrl;
464 	int j;
465 
466 	tx_maybe_reset_collisions(sp, sregs);
467 
468 	if (!(status & (HPC3_ETXCTRL_ACTIVE | SEEQ_TSTAT_PTRANS))) {
469 		/* Oops, HPC detected some sort of error. */
470 		if (status & SEEQ_TSTAT_R16)
471 			dev->stats.tx_aborted_errors++;
472 		if (status & SEEQ_TSTAT_UFLOW)
473 			dev->stats.tx_fifo_errors++;
474 		if (status & SEEQ_TSTAT_LCLS)
475 			dev->stats.collisions++;
476 	}
477 
478 	/* Ack 'em... */
479 	for (j = sp->tx_old; j != sp->tx_new; j = NEXT_TX(j)) {
480 		td = &sp->tx_desc[j];
481 
482 		dma_sync_desc_cpu(dev, td);
483 		if (!(td->tdma.cntinfo & (HPCDMA_XIU)))
484 			break;
485 		if (!(td->tdma.cntinfo & (HPCDMA_ETXD))) {
486 			dma_sync_desc_dev(dev, td);
487 			if (!(status & HPC3_ETXCTRL_ACTIVE)) {
488 				hregs->tx_ndptr = VIRT_TO_DMA(sp, td);
489 				hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE;
490 			}
491 			break;
492 		}
493 		dev->stats.tx_packets++;
494 		sp->tx_old = NEXT_TX(sp->tx_old);
495 		td->tdma.cntinfo &= ~(HPCDMA_XIU | HPCDMA_XIE);
496 		td->tdma.cntinfo |= HPCDMA_EOX;
497 		if (td->skb) {
498 			dev_kfree_skb_any(td->skb);
499 			td->skb = NULL;
500 		}
501 		dma_sync_desc_dev(dev, td);
502 	}
503 }
504 
sgiseeq_interrupt(int irq,void * dev_id)505 static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id)
506 {
507 	struct net_device *dev = (struct net_device *) dev_id;
508 	struct sgiseeq_private *sp = netdev_priv(dev);
509 	struct hpc3_ethregs *hregs = sp->hregs;
510 	struct sgiseeq_regs *sregs = sp->sregs;
511 
512 	spin_lock(&sp->tx_lock);
513 
514 	/* Ack the IRQ and set software state. */
515 	hregs->reset = HPC3_ERST_CLRIRQ;
516 
517 	/* Always check for received packets. */
518 	sgiseeq_rx(dev, sp, hregs, sregs);
519 
520 	/* Only check for tx acks if we have something queued. */
521 	if (sp->tx_old != sp->tx_new)
522 		sgiseeq_tx(dev, sp, hregs, sregs);
523 
524 	if ((TX_BUFFS_AVAIL(sp) > 0) && netif_queue_stopped(dev)) {
525 		netif_wake_queue(dev);
526 	}
527 	spin_unlock(&sp->tx_lock);
528 
529 	return IRQ_HANDLED;
530 }
531 
sgiseeq_open(struct net_device * dev)532 static int sgiseeq_open(struct net_device *dev)
533 {
534 	struct sgiseeq_private *sp = netdev_priv(dev);
535 	struct sgiseeq_regs *sregs = sp->sregs;
536 	unsigned int irq = dev->irq;
537 	int err;
538 
539 	if (request_irq(irq, sgiseeq_interrupt, 0, sgiseeqstr, dev)) {
540 		printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq);
541 		return -EAGAIN;
542 	}
543 
544 	err = init_seeq(dev, sp, sregs);
545 	if (err)
546 		goto out_free_irq;
547 
548 	netif_start_queue(dev);
549 
550 	return 0;
551 
552 out_free_irq:
553 	free_irq(irq, dev);
554 
555 	return err;
556 }
557 
sgiseeq_close(struct net_device * dev)558 static int sgiseeq_close(struct net_device *dev)
559 {
560 	struct sgiseeq_private *sp = netdev_priv(dev);
561 	struct sgiseeq_regs *sregs = sp->sregs;
562 	unsigned int irq = dev->irq;
563 
564 	netif_stop_queue(dev);
565 
566 	/* Shutdown the Seeq. */
567 	reset_hpc3_and_seeq(sp->hregs, sregs);
568 	free_irq(irq, dev);
569 	seeq_purge_ring(dev);
570 
571 	return 0;
572 }
573 
sgiseeq_reset(struct net_device * dev)574 static inline int sgiseeq_reset(struct net_device *dev)
575 {
576 	struct sgiseeq_private *sp = netdev_priv(dev);
577 	struct sgiseeq_regs *sregs = sp->sregs;
578 	int err;
579 
580 	err = init_seeq(dev, sp, sregs);
581 	if (err)
582 		return err;
583 
584 	netif_trans_update(dev); /* prevent tx timeout */
585 	netif_wake_queue(dev);
586 
587 	return 0;
588 }
589 
590 static netdev_tx_t
sgiseeq_start_xmit(struct sk_buff * skb,struct net_device * dev)591 sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev)
592 {
593 	struct sgiseeq_private *sp = netdev_priv(dev);
594 	struct hpc3_ethregs *hregs = sp->hregs;
595 	unsigned long flags;
596 	struct sgiseeq_tx_desc *td;
597 	int len, entry;
598 
599 	spin_lock_irqsave(&sp->tx_lock, flags);
600 
601 	/* Setup... */
602 	len = skb->len;
603 	if (len < ETH_ZLEN) {
604 		if (skb_padto(skb, ETH_ZLEN)) {
605 			spin_unlock_irqrestore(&sp->tx_lock, flags);
606 			return NETDEV_TX_OK;
607 		}
608 		len = ETH_ZLEN;
609 	}
610 
611 	dev->stats.tx_bytes += len;
612 	entry = sp->tx_new;
613 	td = &sp->tx_desc[entry];
614 	dma_sync_desc_cpu(dev, td);
615 
616 	/* Create entry.  There are so many races with adding a new
617 	 * descriptor to the chain:
618 	 * 1) Assume that the HPC is off processing a DMA chain while
619 	 *    we are changing all of the following.
620 	 * 2) Do no allow the HPC to look at a new descriptor until
621 	 *    we have completely set up it's state.  This means, do
622 	 *    not clear HPCDMA_EOX in the current last descritptor
623 	 *    until the one we are adding looks consistent and could
624 	 *    be processes right now.
625 	 * 3) The tx interrupt code must notice when we've added a new
626 	 *    entry and the HPC got to the end of the chain before we
627 	 *    added this new entry and restarted it.
628 	 */
629 	td->skb = skb;
630 	td->tdma.pbuf = dma_map_single(dev->dev.parent, skb->data,
631 				       len, DMA_TO_DEVICE);
632 	td->tdma.cntinfo = (len & HPCDMA_BCNT) |
633 	                   HPCDMA_XIU | HPCDMA_EOXP | HPCDMA_XIE | HPCDMA_EOX;
634 	dma_sync_desc_dev(dev, td);
635 	if (sp->tx_old != sp->tx_new) {
636 		struct sgiseeq_tx_desc *backend;
637 
638 		backend = &sp->tx_desc[PREV_TX(sp->tx_new)];
639 		dma_sync_desc_cpu(dev, backend);
640 		backend->tdma.cntinfo &= ~HPCDMA_EOX;
641 		dma_sync_desc_dev(dev, backend);
642 	}
643 	sp->tx_new = NEXT_TX(sp->tx_new); /* Advance. */
644 
645 	/* Maybe kick the HPC back into motion. */
646 	if (!(hregs->tx_ctrl & HPC3_ETXCTRL_ACTIVE))
647 		kick_tx(dev, sp, hregs);
648 
649 	if (!TX_BUFFS_AVAIL(sp))
650 		netif_stop_queue(dev);
651 	spin_unlock_irqrestore(&sp->tx_lock, flags);
652 
653 	return NETDEV_TX_OK;
654 }
655 
timeout(struct net_device * dev,unsigned int txqueue)656 static void timeout(struct net_device *dev, unsigned int txqueue)
657 {
658 	printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name);
659 	sgiseeq_reset(dev);
660 
661 	netif_trans_update(dev); /* prevent tx timeout */
662 	netif_wake_queue(dev);
663 }
664 
sgiseeq_set_multicast(struct net_device * dev)665 static void sgiseeq_set_multicast(struct net_device *dev)
666 {
667 	struct sgiseeq_private *sp = netdev_priv(dev);
668 	unsigned char oldmode = sp->mode;
669 
670 	if(dev->flags & IFF_PROMISC)
671 		sp->mode = SEEQ_RCMD_RANY;
672 	else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev))
673 		sp->mode = SEEQ_RCMD_RBMCAST;
674 	else
675 		sp->mode = SEEQ_RCMD_RBCAST;
676 
677 	/* XXX I know this sucks, but is there a better way to reprogram
678 	 * XXX the receiver? At least, this shouldn't happen too often.
679 	 */
680 
681 	if (oldmode != sp->mode)
682 		sgiseeq_reset(dev);
683 }
684 
setup_tx_ring(struct net_device * dev,struct sgiseeq_tx_desc * buf,int nbufs)685 static inline void setup_tx_ring(struct net_device *dev,
686 				 struct sgiseeq_tx_desc *buf,
687 				 int nbufs)
688 {
689 	struct sgiseeq_private *sp = netdev_priv(dev);
690 	int i = 0;
691 
692 	while (i < (nbufs - 1)) {
693 		buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf + i + 1);
694 		buf[i].tdma.pbuf = 0;
695 		dma_sync_desc_dev(dev, &buf[i]);
696 		i++;
697 	}
698 	buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf);
699 	dma_sync_desc_dev(dev, &buf[i]);
700 }
701 
setup_rx_ring(struct net_device * dev,struct sgiseeq_rx_desc * buf,int nbufs)702 static inline void setup_rx_ring(struct net_device *dev,
703 				 struct sgiseeq_rx_desc *buf,
704 				 int nbufs)
705 {
706 	struct sgiseeq_private *sp = netdev_priv(dev);
707 	int i = 0;
708 
709 	while (i < (nbufs - 1)) {
710 		buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf + i + 1);
711 		buf[i].rdma.pbuf = 0;
712 		dma_sync_desc_dev(dev, &buf[i]);
713 		i++;
714 	}
715 	buf[i].rdma.pbuf = 0;
716 	buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf);
717 	dma_sync_desc_dev(dev, &buf[i]);
718 }
719 
720 static const struct net_device_ops sgiseeq_netdev_ops = {
721 	.ndo_open		= sgiseeq_open,
722 	.ndo_stop		= sgiseeq_close,
723 	.ndo_start_xmit		= sgiseeq_start_xmit,
724 	.ndo_tx_timeout		= timeout,
725 	.ndo_set_rx_mode	= sgiseeq_set_multicast,
726 	.ndo_set_mac_address	= sgiseeq_set_mac_address,
727 	.ndo_validate_addr	= eth_validate_addr,
728 };
729 
sgiseeq_probe(struct platform_device * pdev)730 static int sgiseeq_probe(struct platform_device *pdev)
731 {
732 	struct sgiseeq_platform_data *pd = dev_get_platdata(&pdev->dev);
733 	struct hpc3_regs *hpcregs = pd->hpc;
734 	struct sgiseeq_init_block *sr;
735 	unsigned int irq = pd->irq;
736 	struct sgiseeq_private *sp;
737 	struct net_device *dev;
738 	int err;
739 
740 	dev = alloc_etherdev(sizeof (struct sgiseeq_private));
741 	if (!dev) {
742 		err = -ENOMEM;
743 		goto err_out;
744 	}
745 
746 	platform_set_drvdata(pdev, dev);
747 	SET_NETDEV_DEV(dev, &pdev->dev);
748 	sp = netdev_priv(dev);
749 
750 	/* Make private data page aligned */
751 	sr = dma_alloc_noncoherent(&pdev->dev, sizeof(*sp->srings),
752 			&sp->srings_dma, DMA_BIDIRECTIONAL, GFP_KERNEL);
753 	if (!sr) {
754 		printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n");
755 		err = -ENOMEM;
756 		goto err_out_free_dev;
757 	}
758 	sp->srings = sr;
759 	sp->rx_desc = sp->srings->rxvector;
760 	sp->tx_desc = sp->srings->txvector;
761 	spin_lock_init(&sp->tx_lock);
762 
763 	/* A couple calculations now, saves many cycles later. */
764 	setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS);
765 	setup_tx_ring(dev, sp->tx_desc, SEEQ_TX_BUFFERS);
766 
767 	eth_hw_addr_set(dev, pd->mac);
768 
769 #ifdef DEBUG
770 	gpriv = sp;
771 	gdev = dev;
772 #endif
773 	sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0];
774 	sp->hregs = &hpcregs->ethregs;
775 	sp->name = sgiseeqstr;
776 	sp->mode = SEEQ_RCMD_RBCAST;
777 
778 	/* Setup PIO and DMA transfer timing */
779 	sp->hregs->pconfig = 0x161;
780 	sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP |
781 			     HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026;
782 
783 	/* Setup PIO and DMA transfer timing */
784 	sp->hregs->pconfig = 0x161;
785 	sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP |
786 			     HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026;
787 
788 	/* Reset the chip. */
789 	hpc3_eth_reset(sp->hregs);
790 
791 	sp->is_edlc = !(sp->sregs->rw.rregs.collision_tx[0] & 0xff);
792 	if (sp->is_edlc)
793 		sp->control = SEEQ_CTRL_XCNT | SEEQ_CTRL_ACCNT |
794 			      SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT |
795 			      SEEQ_CTRL_ENCARR;
796 
797 	dev->netdev_ops		= &sgiseeq_netdev_ops;
798 	dev->watchdog_timeo	= (200 * HZ) / 1000;
799 	dev->irq		= irq;
800 
801 	if (register_netdev(dev)) {
802 		printk(KERN_ERR "Sgiseeq: Cannot register net device, "
803 		       "aborting.\n");
804 		err = -ENODEV;
805 		goto err_out_free_attrs;
806 	}
807 
808 	printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr);
809 
810 	return 0;
811 
812 err_out_free_attrs:
813 	dma_free_noncoherent(&pdev->dev, sizeof(*sp->srings), sp->srings,
814 		       sp->srings_dma, DMA_BIDIRECTIONAL);
815 err_out_free_dev:
816 	free_netdev(dev);
817 
818 err_out:
819 	return err;
820 }
821 
sgiseeq_remove(struct platform_device * pdev)822 static void sgiseeq_remove(struct platform_device *pdev)
823 {
824 	struct net_device *dev = platform_get_drvdata(pdev);
825 	struct sgiseeq_private *sp = netdev_priv(dev);
826 
827 	unregister_netdev(dev);
828 	dma_free_noncoherent(&pdev->dev, sizeof(*sp->srings), sp->srings,
829 		       sp->srings_dma, DMA_BIDIRECTIONAL);
830 	free_netdev(dev);
831 }
832 
833 static struct platform_driver sgiseeq_driver = {
834 	.probe	= sgiseeq_probe,
835 	.remove_new = sgiseeq_remove,
836 	.driver = {
837 		.name	= "sgiseeq",
838 	}
839 };
840 
841 module_platform_driver(sgiseeq_driver);
842 
843 MODULE_DESCRIPTION("SGI Seeq 8003 driver");
844 MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>");
845 MODULE_LICENSE("GPL");
846 MODULE_ALIAS("platform:sgiseeq");
847