1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Atmel SDMMC controller driver.
4 *
5 * Copyright (C) 2015 Atmel,
6 * 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
7 */
8
9 #include <linux/bitfield.h>
10 #include <linux/clk.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/io.h>
14 #include <linux/iopoll.h>
15 #include <linux/kernel.h>
16 #include <linux/mmc/host.h>
17 #include <linux/mmc/slot-gpio.h>
18 #include <linux/module.h>
19 #include <linux/of.h>
20 #include <linux/platform_device.h>
21 #include <linux/pm.h>
22 #include <linux/pm_runtime.h>
23
24 #include "sdhci-pltfm.h"
25
26 #define SDMMC_MC1R 0x204
27 #define SDMMC_MC1R_DDR BIT(3)
28 #define SDMMC_MC1R_FCD BIT(7)
29 #define SDMMC_CACR 0x230
30 #define SDMMC_CACR_CAPWREN BIT(0)
31 #define SDMMC_CACR_KEY (0x46 << 8)
32 #define SDMMC_CALCR 0x240
33 #define SDMMC_CALCR_EN BIT(0)
34 #define SDMMC_CALCR_ALWYSON BIT(4)
35
36 #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */
37
38 struct sdhci_at91_soc_data {
39 const struct sdhci_pltfm_data *pdata;
40 bool baseclk_is_generated_internally;
41 unsigned int divider_for_baseclk;
42 };
43
44 struct sdhci_at91_priv {
45 const struct sdhci_at91_soc_data *soc_data;
46 struct clk *hclock;
47 struct clk *gck;
48 struct clk *mainck;
49 bool restore_needed;
50 bool cal_always_on;
51 };
52
sdhci_at91_set_force_card_detect(struct sdhci_host * host)53 static void sdhci_at91_set_force_card_detect(struct sdhci_host *host)
54 {
55 u8 mc1r;
56
57 mc1r = readb(host->ioaddr + SDMMC_MC1R);
58 mc1r |= SDMMC_MC1R_FCD;
59 writeb(mc1r, host->ioaddr + SDMMC_MC1R);
60 }
61
sdhci_at91_set_clock(struct sdhci_host * host,unsigned int clock)62 static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
63 {
64 u16 clk;
65
66 host->mmc->actual_clock = 0;
67
68 /*
69 * There is no requirement to disable the internal clock before
70 * changing the SD clock configuration. Moreover, disabling the
71 * internal clock, changing the configuration and re-enabling the
72 * internal clock causes some bugs. It can prevent to get the internal
73 * clock stable flag ready and an unexpected switch to the base clock
74 * when using presets.
75 */
76 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
77 clk &= SDHCI_CLOCK_INT_EN;
78 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
79
80 if (clock == 0)
81 return;
82
83 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
84
85 clk |= SDHCI_CLOCK_INT_EN;
86 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
87
88 /* Wait max 20 ms */
89 if (read_poll_timeout(sdhci_readw, clk, (clk & SDHCI_CLOCK_INT_STABLE),
90 1000, 20000, false, host, SDHCI_CLOCK_CONTROL)) {
91 pr_err("%s: Internal clock never stabilised.\n",
92 mmc_hostname(host->mmc));
93 return;
94 }
95
96 clk |= SDHCI_CLOCK_CARD_EN;
97 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
98 }
99
sdhci_at91_set_uhs_signaling(struct sdhci_host * host,unsigned int timing)100 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
101 unsigned int timing)
102 {
103 u8 mc1r;
104
105 if (timing == MMC_TIMING_MMC_DDR52) {
106 mc1r = sdhci_readb(host, SDMMC_MC1R);
107 mc1r |= SDMMC_MC1R_DDR;
108 sdhci_writeb(host, mc1r, SDMMC_MC1R);
109 }
110 sdhci_set_uhs_signaling(host, timing);
111 }
112
sdhci_at91_reset(struct sdhci_host * host,u8 mask)113 static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
114 {
115 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
116 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
117 unsigned int tmp;
118
119 sdhci_reset(host, mask);
120
121 if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
122 || mmc_gpio_get_cd(host->mmc) >= 0)
123 sdhci_at91_set_force_card_detect(host);
124
125 if (priv->cal_always_on && (mask & SDHCI_RESET_ALL)) {
126 u32 calcr = sdhci_readl(host, SDMMC_CALCR);
127
128 sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
129 SDMMC_CALCR);
130
131 if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN),
132 10, 20000, false, host, SDMMC_CALCR))
133 dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");
134 }
135 }
136
137 static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
138 .set_clock = sdhci_at91_set_clock,
139 .set_bus_width = sdhci_set_bus_width,
140 .reset = sdhci_at91_reset,
141 .set_uhs_signaling = sdhci_at91_set_uhs_signaling,
142 .set_power = sdhci_set_power_and_bus_voltage,
143 };
144
145 static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = {
146 .ops = &sdhci_at91_sama5d2_ops,
147 };
148
149 static const struct sdhci_at91_soc_data soc_data_sama5d2 = {
150 .pdata = &sdhci_sama5d2_pdata,
151 .baseclk_is_generated_internally = false,
152 };
153
154 static const struct sdhci_at91_soc_data soc_data_sam9x60 = {
155 .pdata = &sdhci_sama5d2_pdata,
156 .baseclk_is_generated_internally = true,
157 .divider_for_baseclk = 2,
158 };
159
160 static const struct of_device_id sdhci_at91_dt_match[] = {
161 { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
162 { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 },
163 {}
164 };
165 MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match);
166
sdhci_at91_set_clks_presets(struct device * dev)167 static int sdhci_at91_set_clks_presets(struct device *dev)
168 {
169 struct sdhci_host *host = dev_get_drvdata(dev);
170 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
171 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
172 unsigned int caps0, caps1;
173 unsigned int clk_base, clk_mul;
174 unsigned int gck_rate, clk_base_rate;
175 unsigned int preset_div;
176
177 clk_prepare_enable(priv->hclock);
178 caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
179 caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
180
181 gck_rate = clk_get_rate(priv->gck);
182 if (priv->soc_data->baseclk_is_generated_internally)
183 clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk;
184 else
185 clk_base_rate = clk_get_rate(priv->mainck);
186
187 clk_base = clk_base_rate / 1000000;
188 clk_mul = gck_rate / clk_base_rate - 1;
189
190 caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK;
191 caps0 |= FIELD_PREP(SDHCI_CLOCK_V3_BASE_MASK, clk_base);
192 caps1 &= ~SDHCI_CLOCK_MUL_MASK;
193 caps1 |= FIELD_PREP(SDHCI_CLOCK_MUL_MASK, clk_mul);
194 /* Set capabilities in r/w mode. */
195 writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
196 writel(caps0, host->ioaddr + SDHCI_CAPABILITIES);
197 writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
198 /* Set capabilities in ro mode. */
199 writel(0, host->ioaddr + SDMMC_CACR);
200
201 dev_dbg(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n",
202 clk_mul, gck_rate, clk_base_rate);
203
204 /*
205 * We have to set preset values because it depends on the clk_mul
206 * value. Moreover, SDR104 is supported in a degraded mode since the
207 * maximum sd clock value is 120 MHz instead of 208 MHz. For that
208 * reason, we need to use presets to support SDR104.
209 */
210 preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1;
211 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
212 host->ioaddr + SDHCI_PRESET_FOR_SDR12);
213 preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
214 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
215 host->ioaddr + SDHCI_PRESET_FOR_SDR25);
216 preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1;
217 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
218 host->ioaddr + SDHCI_PRESET_FOR_SDR50);
219 preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1;
220 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
221 host->ioaddr + SDHCI_PRESET_FOR_SDR104);
222 preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1;
223 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
224 host->ioaddr + SDHCI_PRESET_FOR_DDR50);
225
226 clk_prepare_enable(priv->mainck);
227 clk_prepare_enable(priv->gck);
228
229 return 0;
230 }
231
232 #ifdef CONFIG_PM_SLEEP
sdhci_at91_suspend(struct device * dev)233 static int sdhci_at91_suspend(struct device *dev)
234 {
235 struct sdhci_host *host = dev_get_drvdata(dev);
236 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
237 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
238 int ret;
239
240 ret = pm_runtime_force_suspend(dev);
241
242 priv->restore_needed = true;
243
244 return ret;
245 }
246 #endif /* CONFIG_PM_SLEEP */
247
248 #ifdef CONFIG_PM
sdhci_at91_runtime_suspend(struct device * dev)249 static int sdhci_at91_runtime_suspend(struct device *dev)
250 {
251 struct sdhci_host *host = dev_get_drvdata(dev);
252 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
253 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
254 int ret;
255
256 ret = sdhci_runtime_suspend_host(host);
257
258 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
259 mmc_retune_needed(host->mmc);
260
261 clk_disable_unprepare(priv->gck);
262 clk_disable_unprepare(priv->hclock);
263 clk_disable_unprepare(priv->mainck);
264
265 return ret;
266 }
267
sdhci_at91_runtime_resume(struct device * dev)268 static int sdhci_at91_runtime_resume(struct device *dev)
269 {
270 struct sdhci_host *host = dev_get_drvdata(dev);
271 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
272 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
273 int ret;
274
275 if (priv->restore_needed) {
276 ret = sdhci_at91_set_clks_presets(dev);
277 if (ret)
278 return ret;
279
280 priv->restore_needed = false;
281 goto out;
282 }
283
284 ret = clk_prepare_enable(priv->mainck);
285 if (ret) {
286 dev_err(dev, "can't enable mainck\n");
287 return ret;
288 }
289
290 ret = clk_prepare_enable(priv->hclock);
291 if (ret) {
292 dev_err(dev, "can't enable hclock\n");
293 return ret;
294 }
295
296 ret = clk_prepare_enable(priv->gck);
297 if (ret) {
298 dev_err(dev, "can't enable gck\n");
299 return ret;
300 }
301
302 out:
303 return sdhci_runtime_resume_host(host, 0);
304 }
305 #endif /* CONFIG_PM */
306
307 static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
308 SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume)
309 SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
310 sdhci_at91_runtime_resume,
311 NULL)
312 };
313
sdhci_at91_probe(struct platform_device * pdev)314 static int sdhci_at91_probe(struct platform_device *pdev)
315 {
316 const struct sdhci_at91_soc_data *soc_data;
317 struct sdhci_host *host;
318 struct sdhci_pltfm_host *pltfm_host;
319 struct sdhci_at91_priv *priv;
320 int ret;
321
322 soc_data = of_device_get_match_data(&pdev->dev);
323 if (!soc_data)
324 return -EINVAL;
325
326 host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv));
327 if (IS_ERR(host))
328 return PTR_ERR(host);
329
330 pltfm_host = sdhci_priv(host);
331 priv = sdhci_pltfm_priv(pltfm_host);
332 priv->soc_data = soc_data;
333
334 priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
335 if (IS_ERR(priv->mainck)) {
336 if (soc_data->baseclk_is_generated_internally) {
337 priv->mainck = NULL;
338 } else {
339 dev_err(&pdev->dev, "failed to get baseclk\n");
340 ret = PTR_ERR(priv->mainck);
341 goto sdhci_pltfm_free;
342 }
343 }
344
345 priv->hclock = devm_clk_get(&pdev->dev, "hclock");
346 if (IS_ERR(priv->hclock)) {
347 dev_err(&pdev->dev, "failed to get hclock\n");
348 ret = PTR_ERR(priv->hclock);
349 goto sdhci_pltfm_free;
350 }
351
352 priv->gck = devm_clk_get(&pdev->dev, "multclk");
353 if (IS_ERR(priv->gck)) {
354 dev_err(&pdev->dev, "failed to get multclk\n");
355 ret = PTR_ERR(priv->gck);
356 goto sdhci_pltfm_free;
357 }
358
359 ret = sdhci_at91_set_clks_presets(&pdev->dev);
360 if (ret)
361 goto sdhci_pltfm_free;
362
363 priv->restore_needed = false;
364
365 /*
366 * if SDCAL pin is wrongly connected, we must enable
367 * the analog calibration cell permanently.
368 */
369 priv->cal_always_on =
370 device_property_read_bool(&pdev->dev,
371 "microchip,sdcal-inverted");
372
373 ret = mmc_of_parse(host->mmc);
374 if (ret)
375 goto clocks_disable_unprepare;
376
377 sdhci_get_of_property(pdev);
378
379 pm_runtime_get_noresume(&pdev->dev);
380 pm_runtime_set_active(&pdev->dev);
381 pm_runtime_enable(&pdev->dev);
382 pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
383 pm_runtime_use_autosuspend(&pdev->dev);
384
385 /* HS200 is broken at this moment */
386 host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
387
388 ret = sdhci_add_host(host);
389 if (ret)
390 goto pm_runtime_disable;
391
392 /*
393 * When calling sdhci_runtime_suspend_host(), the sdhci layer makes
394 * the assumption that all the clocks of the controller are disabled.
395 * It means we can't get irq from it when it is runtime suspended.
396 * For that reason, it is not planned to wake-up on a card detect irq
397 * from the controller.
398 * If we want to use runtime PM and to be able to wake-up on card
399 * insertion, we have to use a GPIO for the card detection or we can
400 * use polling. Be aware that using polling will resume/suspend the
401 * controller between each attempt.
402 * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
403 * to enable polling via device tree with broken-cd property.
404 */
405 if (mmc_card_is_removable(host->mmc) &&
406 mmc_gpio_get_cd(host->mmc) < 0) {
407 host->mmc->caps |= MMC_CAP_NEEDS_POLL;
408 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
409 }
410
411 /*
412 * If the device attached to the MMC bus is not removable, it is safer
413 * to set the Force Card Detect bit. People often don't connect the
414 * card detect signal and use this pin for another purpose. If the card
415 * detect pin is not muxed to SDHCI controller, a default value is
416 * used. This value can be different from a SoC revision to another
417 * one. Problems come when this default value is not card present. To
418 * avoid this case, if the device is non removable then the card
419 * detection procedure using the SDMCC_CD signal is bypassed.
420 * This bit is reset when a software reset for all command is performed
421 * so we need to implement our own reset function to set back this bit.
422 *
423 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
424 */
425 if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
426 || mmc_gpio_get_cd(host->mmc) >= 0)
427 sdhci_at91_set_force_card_detect(host);
428
429 pm_runtime_put_autosuspend(&pdev->dev);
430
431 return 0;
432
433 pm_runtime_disable:
434 pm_runtime_disable(&pdev->dev);
435 pm_runtime_set_suspended(&pdev->dev);
436 pm_runtime_put_noidle(&pdev->dev);
437 clocks_disable_unprepare:
438 clk_disable_unprepare(priv->gck);
439 clk_disable_unprepare(priv->mainck);
440 clk_disable_unprepare(priv->hclock);
441 sdhci_pltfm_free:
442 sdhci_pltfm_free(pdev);
443 return ret;
444 }
445
sdhci_at91_remove(struct platform_device * pdev)446 static void sdhci_at91_remove(struct platform_device *pdev)
447 {
448 struct sdhci_host *host = platform_get_drvdata(pdev);
449 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
450 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
451 struct clk *gck = priv->gck;
452 struct clk *hclock = priv->hclock;
453 struct clk *mainck = priv->mainck;
454
455 pm_runtime_get_sync(&pdev->dev);
456 pm_runtime_disable(&pdev->dev);
457 pm_runtime_put_noidle(&pdev->dev);
458
459 sdhci_pltfm_remove(pdev);
460
461 clk_disable_unprepare(gck);
462 clk_disable_unprepare(hclock);
463 clk_disable_unprepare(mainck);
464 }
465
466 static struct platform_driver sdhci_at91_driver = {
467 .driver = {
468 .name = "sdhci-at91",
469 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
470 .of_match_table = sdhci_at91_dt_match,
471 .pm = &sdhci_at91_dev_pm_ops,
472 },
473 .probe = sdhci_at91_probe,
474 .remove_new = sdhci_at91_remove,
475 };
476
477 module_platform_driver(sdhci_at91_driver);
478
479 MODULE_DESCRIPTION("SDHCI driver for at91");
480 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
481 MODULE_LICENSE("GPL v2");
482