1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /* Radio tuning for RTL8225 on RTL8187SE
4 *
5 * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
6 * Copyright 2014 Andrea Merello <andrea.merello@gmail.com>
7 *
8 * Based on the r8180 and Realtek r8187se drivers, which are:
9 * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al.
10 *
11 * Also based on the rtl8187 driver, which is:
12 * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
13 * Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
14 */
15
16 #include <net/mac80211.h>
17
18 #include "rtl8180.h"
19 #include "rtl8225se.h"
20
21 #define PFX "rtl8225 (se) "
22
23 static const u32 RF_GAIN_TABLE[] = {
24 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
25 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
26 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
27 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
28 0x0183, 0x0163, 0x0143, 0x0123, 0x0103
29 };
30
31 static const u8 cck_ofdm_gain_settings[] = {
32 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
33 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
34 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
35 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
36 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
37 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
38 };
39
40 static const u32 rtl8225se_chan[] = {
41 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
42 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
43 };
44
45 static const u8 ZEBRA_AGC[] = {
46 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A,
47 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
48 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
49 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
50 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27,
51 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
52 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00,
53 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
54 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
55 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
56 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b,
57 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
58 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21,
59 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
60 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
61 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
62 };
63
64 static const u8 OFDM_CONFIG[] = {
65 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
66 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
67 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
68 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
69 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
70 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
71 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
72 0xD8, 0x3C, 0x7B, 0x10, 0x10
73 };
74
rtl8187se_three_wire_io(struct ieee80211_hw * dev,u8 * data,u8 len,bool write)75 static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data,
76 u8 len, bool write)
77 {
78 struct rtl8180_priv *priv = dev->priv;
79 int i;
80 u8 tmp;
81
82 do {
83 for (i = 0; i < 5; i++) {
84 tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
85 if (!(tmp & 0x3))
86 break;
87 udelay(10);
88 }
89 if (i == 5)
90 wiphy_err(dev->wiphy, PFX
91 "CmdReg: 0x%x RE/WE bits aren't clear\n", tmp);
92
93 tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02;
94 rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp);
95
96 tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7;
97 rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp);
98 if (write) {
99 if (len == 16) {
100 rtl818x_iowrite16(priv, SW_3W_DB0,
101 *(u16 *)data);
102 } else if (len == 64) {
103 rtl818x_iowrite32(priv, SW_3W_DB0_4,
104 *((u32 *)data));
105 rtl818x_iowrite32(priv, SW_3W_DB1_4,
106 *((u32 *)(data + 4)));
107 } else
108 wiphy_err(dev->wiphy, PFX
109 "Unimplemented length\n");
110 } else {
111 rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data);
112 }
113 if (write)
114 tmp = 2;
115 else
116 tmp = 1;
117 rtl818x_iowrite8(priv, SW_3W_CMD1, tmp);
118 for (i = 0; i < 5; i++) {
119 tmp = rtl818x_ioread8(priv, SW_3W_CMD1);
120 if (!(tmp & 0x3))
121 break;
122 udelay(10);
123 }
124 rtl818x_iowrite8(priv, SW_3W_CMD1, 0);
125 if (!write) {
126 *((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG);
127 *((u16 *)data) &= 0x0FFF;
128 }
129 } while (0);
130 }
131
rtl8187se_rf_readreg(struct ieee80211_hw * dev,u8 addr)132 static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr)
133 {
134 u32 dataread = addr & 0x0F;
135 rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0);
136 return dataread;
137 }
138
rtl8187se_rf_writereg(struct ieee80211_hw * dev,u8 addr,u32 data)139 static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data)
140 {
141 u32 outdata = (data << 4) | (u32)(addr & 0x0F);
142 rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1);
143 }
144
145
rtl8225se_write_zebra_agc(struct ieee80211_hw * dev)146 static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev)
147 {
148 int i;
149
150 for (i = 0; i < 128; i++) {
151 rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]);
152 rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80);
153 rtl8225se_write_phy_ofdm(dev, 0xE, 0);
154 }
155 }
156
rtl8187se_write_ofdm_config(struct ieee80211_hw * dev)157 static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev)
158 {
159 /* write OFDM_CONFIG table */
160 int i;
161
162 for (i = 0; i < 60; i++)
163 rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]);
164
165 }
166
rtl8225sez2_rf_set_tx_power(struct ieee80211_hw * dev,int channel)167 static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
168 {
169 struct rtl8180_priv *priv = dev->priv;
170 u8 cck_power, ofdm_power;
171
172 cck_power = priv->channels[channel - 1].hw_value & 0xFF;
173 if (cck_power > 35)
174 cck_power = 35;
175 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
176 cck_ofdm_gain_settings[cck_power]);
177
178 usleep_range(1000, 5000);
179 ofdm_power = priv->channels[channel - 1].hw_value >> 8;
180 if (ofdm_power > 35)
181 ofdm_power = 35;
182
183 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
184 cck_ofdm_gain_settings[ofdm_power]);
185 if (ofdm_power < 12) {
186 rtl8225se_write_phy_ofdm(dev, 7, 0x5C);
187 rtl8225se_write_phy_ofdm(dev, 9, 0x5C);
188 }
189 if (ofdm_power < 18) {
190 rtl8225se_write_phy_ofdm(dev, 7, 0x54);
191 rtl8225se_write_phy_ofdm(dev, 9, 0x54);
192 } else {
193 rtl8225se_write_phy_ofdm(dev, 7, 0x50);
194 rtl8225se_write_phy_ofdm(dev, 9, 0x50);
195 }
196
197 usleep_range(1000, 5000);
198 }
199
rtl8187se_write_rf_gain(struct ieee80211_hw * dev)200 static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev)
201 {
202 int i;
203
204 for (i = 0; i <= 36; i++) {
205 rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1);
206 rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1);
207 }
208 }
209
rtl8187se_write_initial_gain(struct ieee80211_hw * dev,int init_gain)210 static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev,
211 int init_gain)
212 {
213 switch (init_gain) {
214 default:
215 rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1);
216 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
217 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
218 break;
219 case 2:
220 rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
221 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
222 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1);
223 break;
224 case 3:
225 rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1);
226 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
227 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
228 break;
229 case 4:
230 rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
231 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1);
232 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
233 break;
234 case 5:
235 rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1);
236 rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
237 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1);
238 break;
239 case 6:
240 rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
241 rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1);
242 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
243 break;
244 case 7:
245 rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1);
246 rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1);
247 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
248 break;
249 case 8:
250 rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1);
251 rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1);
252 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1);
253 break;
254 }
255 }
256
rtl8225se_rf_init(struct ieee80211_hw * dev)257 void rtl8225se_rf_init(struct ieee80211_hw *dev)
258 {
259 struct rtl8180_priv *priv = dev->priv;
260 u32 rf23, rf24;
261 u8 d_cut = 0;
262 u8 tmp;
263
264 /* Page 1 */
265 rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
266 rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1);
267 rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1);
268 if (rf23 == 0x0818 && rf24 == 0x070C)
269 d_cut = 1;
270
271 wiphy_info(dev->wiphy, "RTL8225-SE version %s\n",
272 d_cut ? "D" : "not-D");
273
274 /* Page 0: reg 0 - 15 */
275 rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
276 rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1);
277 rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
278 rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1);
279 rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1);
280 rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1);
281 rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1);
282 rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1);
283 rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1);
284 rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1);
285 rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1);
286 rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1);
287 rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1);
288 rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
289 rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1);
290 rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1);
291 /* page 1: reg 16-30 */
292 rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1);
293 rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1);
294 rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1);
295 rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1);
296 rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1);
297 rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1);
298 rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
299 rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1);
300 rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1);
301 rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1);
302 if (d_cut)
303 rtl8187se_rf_writereg(dev, 0x0E, 0x0807);
304 else
305 rtl8187se_rf_writereg(dev, 0x0E, 0x0806);
306 mdelay(1);
307 rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1);
308 rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1);
309 rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1);
310 rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1);
311
312 rtl8187se_write_rf_gain(dev);
313
314 rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1);
315 rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1);
316 rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
317 rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11);
318 rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11);
319 rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11);
320 rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11);
321 rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221);
322 rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11);
323 rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1);
324 rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1);
325 rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1);
326 rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1);
327 rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1);
328 rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1);
329 if (priv->xtal_cal) {
330 tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) |
331 (1 << 11) | (1 << 9);
332 rtl8187se_rf_writereg(dev, 0x0F, tmp);
333 wiphy_info(dev->wiphy, "Xtal cal\n");
334 mdelay(1);
335 } else {
336 wiphy_info(dev->wiphy, "NO Xtal cal\n");
337 rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC);
338 mdelay(1);
339 }
340 /* page 0 */
341 rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1);
342 rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1);
343 rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1);
344 rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31);
345 rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1);
346 rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1);
347
348 rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1);
349 rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1);
350 rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1);
351 /* power save parameters */
352 /* TODO: move to dev.c */
353 rtl818x_iowrite8(priv, REG_ADDR1(0x024E),
354 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F);
355 rtl8225se_write_phy_cck(dev, 0x00, 0xC8);
356 rtl8225se_write_phy_cck(dev, 0x06, 0x1C);
357 rtl8225se_write_phy_cck(dev, 0x10, 0x78);
358 rtl8225se_write_phy_cck(dev, 0x2E, 0xD0);
359 rtl8225se_write_phy_cck(dev, 0x2F, 0x06);
360 rtl8225se_write_phy_cck(dev, 0x01, 0x46);
361
362 /* power control */
363 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10);
364 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B);
365
366 rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);
367 rtl8225se_write_phy_ofdm(dev, 0x00, 0x12);
368
369 rtl8225se_write_zebra_agc(dev);
370
371 rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
372
373 rtl8187se_write_ofdm_config(dev);
374
375 /* turn on RF */
376 rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
377 rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
378 /* turn on RF again */
379 rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500);
380 rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500);
381 /* turn on BB */
382 rtl8225se_write_phy_ofdm(dev, 0x10, 0x40);
383 rtl8225se_write_phy_ofdm(dev, 0x12, 0x40);
384
385 rtl8187se_write_initial_gain(dev, 4);
386 }
387
rtl8225se_rf_stop(struct ieee80211_hw * dev)388 void rtl8225se_rf_stop(struct ieee80211_hw *dev)
389 {
390 /* checked for 8187se */
391 struct rtl8180_priv *priv = dev->priv;
392
393 /* turn off BB RXIQ matrix to cut off rx signal */
394 rtl8225se_write_phy_ofdm(dev, 0x10, 0x00);
395 rtl8225se_write_phy_ofdm(dev, 0x12, 0x00);
396 /* turn off RF */
397 rtl8187se_rf_writereg(dev, 0x04, 0x0000);
398 rtl8187se_rf_writereg(dev, 0x00, 0x0000);
399
400 usleep_range(1000, 5000);
401 /* turn off A/D and D/A */
402 rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF);
403 rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF);
404 }
405
rtl8225se_rf_set_channel(struct ieee80211_hw * dev,struct ieee80211_conf * conf)406 void rtl8225se_rf_set_channel(struct ieee80211_hw *dev,
407 struct ieee80211_conf *conf)
408 {
409 int chan =
410 ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
411
412 rtl8225sez2_rf_set_tx_power(dev, chan);
413 rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
414 if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) !=
415 rtl8225se_chan[chan - 1])
416 rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]);
417 usleep_range(10000, 20000);
418 }
419
420 static const struct rtl818x_rf_ops rtl8225se_ops = {
421 .name = "rtl8225-se",
422 .init = rtl8225se_rf_init,
423 .stop = rtl8225se_rf_stop,
424 .set_chan = rtl8225se_rf_set_channel,
425 };
426
rtl8187se_detect_rf(struct ieee80211_hw * dev)427 const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev)
428 {
429 return &rtl8225se_ops;
430 }
431