1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
4 *
5 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
6 *
7 * Inspired by, and loosely based on:
8 *
9 * ar933x_uart.c
10 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
11 *
12 * rocketport_infinity_express-linux-1.20.tar.gz
13 * Copyright (C) 2004-2011 Comtrol, Inc.
14 */
15
16 #include <linux/bitops.h>
17 #include <linux/compiler.h>
18 #include <linux/completion.h>
19 #include <linux/console.h>
20 #include <linux/delay.h>
21 #include <linux/firmware.h>
22 #include <linux/init.h>
23 #include <linux/io.h>
24 #include <linux/ioport.h>
25 #include <linux/irq.h>
26 #include <linux/kernel.h>
27 #include <linux/log2.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/serial.h>
31 #include <linux/serial_core.h>
32 #include <linux/slab.h>
33 #include <linux/sysrq.h>
34 #include <linux/tty.h>
35 #include <linux/tty_flip.h>
36 #include <linux/types.h>
37
38 #define DRV_NAME "rp2"
39
40 #define RP2_FW_NAME "rp2.fw"
41 #define RP2_UCODE_BYTES 0x3f
42
43 #define PORTS_PER_ASIC 16
44 #define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
45
46 #define UART_CLOCK 44236800
47 #define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
48 #define FIFO_SIZE 512
49
50 /* BAR0 registers */
51 #define RP2_FPGA_CTL0 0x110
52 #define RP2_FPGA_CTL1 0x11c
53 #define RP2_IRQ_MASK 0x1ec
54 #define RP2_IRQ_MASK_EN_m BIT(0)
55 #define RP2_IRQ_STATUS 0x1f0
56
57 /* BAR1 registers */
58 #define RP2_ASIC_SPACING 0x1000
59 #define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
60
61 #define RP2_PORT_BASE 0x000
62 #define RP2_PORT_SPACING 0x040
63
64 #define RP2_UCODE_BASE 0x400
65 #define RP2_UCODE_SPACING 0x80
66
67 #define RP2_CLK_PRESCALER 0xc00
68 #define RP2_CH_IRQ_STAT 0xc04
69 #define RP2_CH_IRQ_MASK 0xc08
70 #define RP2_ASIC_IRQ 0xd00
71 #define RP2_ASIC_IRQ_EN_m BIT(20)
72 #define RP2_GLOBAL_CMD 0xd0c
73 #define RP2_ASIC_CFG 0xd04
74
75 /* port registers */
76 #define RP2_DATA_DWORD 0x000
77
78 #define RP2_DATA_BYTE 0x008
79 #define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
80 #define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
81 #define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
82 #define RP2_DATA_BYTE_BREAK_m BIT(11)
83
84 /* This lets uart_insert_char() drop bytes received on a !CREAD port */
85 #define RP2_DUMMY_READ BIT(16)
86
87 #define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
88 RP2_DATA_BYTE_ERR_OVERRUN_m | \
89 RP2_DATA_BYTE_ERR_FRAMING_m | \
90 RP2_DATA_BYTE_BREAK_m)
91
92 #define RP2_RX_FIFO_COUNT 0x00c
93 #define RP2_TX_FIFO_COUNT 0x00e
94
95 #define RP2_CHAN_STAT 0x010
96 #define RP2_CHAN_STAT_RXDATA_m BIT(0)
97 #define RP2_CHAN_STAT_DCD_m BIT(3)
98 #define RP2_CHAN_STAT_DSR_m BIT(4)
99 #define RP2_CHAN_STAT_CTS_m BIT(5)
100 #define RP2_CHAN_STAT_RI_m BIT(6)
101 #define RP2_CHAN_STAT_OVERRUN_m BIT(13)
102 #define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
103 #define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
104 #define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
105 #define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
106 #define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
107
108 #define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
109 RP2_CHAN_STAT_CTS_CHANGED_m | \
110 RP2_CHAN_STAT_CD_CHANGED_m | \
111 RP2_CHAN_STAT_RI_CHANGED_m)
112
113 #define RP2_TXRX_CTL 0x014
114 #define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
115 #define RP2_TXRX_CTL_RXIRQ_m BIT(2)
116 #define RP2_TXRX_CTL_RX_TRIG_s 3
117 #define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
118 #define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
119 #define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
120 #define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
121 #define RP2_TXRX_CTL_RX_EN_m BIT(5)
122 #define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
123 #define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
124 #define RP2_TXRX_CTL_TX_TRIG_s 16
125 #define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
126 #define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
127 #define RP2_TXRX_CTL_TXIRQ_m BIT(19)
128 #define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
129 #define RP2_TXRX_CTL_TX_EN_m BIT(24)
130 #define RP2_TXRX_CTL_RTS_m BIT(25)
131 #define RP2_TXRX_CTL_DTR_m BIT(26)
132 #define RP2_TXRX_CTL_LOOP_m BIT(27)
133 #define RP2_TXRX_CTL_BREAK_m BIT(28)
134 #define RP2_TXRX_CTL_CMSPAR_m BIT(29)
135 #define RP2_TXRX_CTL_nPARODD_m BIT(30)
136 #define RP2_TXRX_CTL_PARENB_m BIT(31)
137
138 #define RP2_UART_CTL 0x018
139 #define RP2_UART_CTL_MODE_s 0
140 #define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
141 #define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
142 #define RP2_UART_CTL_FLUSH_RX_m BIT(3)
143 #define RP2_UART_CTL_FLUSH_TX_m BIT(4)
144 #define RP2_UART_CTL_RESET_CH_m BIT(5)
145 #define RP2_UART_CTL_XMIT_EN_m BIT(6)
146 #define RP2_UART_CTL_DATABITS_s 8
147 #define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
148 #define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
149 #define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
150 #define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
151 #define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
152 #define RP2_UART_CTL_STOPBITS_m BIT(10)
153
154 #define RP2_BAUD 0x01c
155
156 /* ucode registers */
157 #define RP2_TX_SWFLOW 0x02
158 #define RP2_TX_SWFLOW_ena 0x81
159 #define RP2_TX_SWFLOW_dis 0x9d
160
161 #define RP2_RX_SWFLOW 0x0c
162 #define RP2_RX_SWFLOW_ena 0x81
163 #define RP2_RX_SWFLOW_dis 0x8d
164
165 #define RP2_RX_FIFO 0x37
166 #define RP2_RX_FIFO_ena 0x08
167 #define RP2_RX_FIFO_dis 0x81
168
169 static struct uart_driver rp2_uart_driver = {
170 .owner = THIS_MODULE,
171 .driver_name = DRV_NAME,
172 .dev_name = "ttyRP",
173 .nr = CONFIG_SERIAL_RP2_NR_UARTS,
174 };
175
176 struct rp2_card;
177
178 struct rp2_uart_port {
179 struct uart_port port;
180 int idx;
181 struct rp2_card *card;
182 void __iomem *asic_base;
183 void __iomem *base;
184 void __iomem *ucode;
185 };
186
187 struct rp2_card {
188 struct pci_dev *pdev;
189 struct rp2_uart_port *ports;
190 int n_ports;
191 int initialized_ports;
192 int minor_start;
193 int smpte;
194 void __iomem *bar0;
195 void __iomem *bar1;
196 spinlock_t card_lock;
197 };
198
199 #define RP_ID(prod) PCI_VDEVICE(RP, (prod))
200 #define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
201
rp2_decode_cap(const struct pci_device_id * id,int * ports,int * smpte)202 static inline void rp2_decode_cap(const struct pci_device_id *id,
203 int *ports, int *smpte)
204 {
205 *ports = id->driver_data >> 8;
206 *smpte = id->driver_data & 0xff;
207 }
208
209 static DEFINE_SPINLOCK(rp2_minor_lock);
210 static int rp2_minor_next;
211
rp2_alloc_ports(int n_ports)212 static int rp2_alloc_ports(int n_ports)
213 {
214 int ret = -ENOSPC;
215
216 spin_lock(&rp2_minor_lock);
217 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
218 /* sorry, no support for hot unplugging individual cards */
219 ret = rp2_minor_next;
220 rp2_minor_next += n_ports;
221 }
222 spin_unlock(&rp2_minor_lock);
223
224 return ret;
225 }
226
port_to_up(struct uart_port * port)227 static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
228 {
229 return container_of(port, struct rp2_uart_port, port);
230 }
231
rp2_rmw(struct rp2_uart_port * up,int reg,u32 clr_bits,u32 set_bits)232 static void rp2_rmw(struct rp2_uart_port *up, int reg,
233 u32 clr_bits, u32 set_bits)
234 {
235 u32 tmp = readl(up->base + reg);
236 tmp &= ~clr_bits;
237 tmp |= set_bits;
238 writel(tmp, up->base + reg);
239 }
240
rp2_rmw_clr(struct rp2_uart_port * up,int reg,u32 val)241 static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
242 {
243 rp2_rmw(up, reg, val, 0);
244 }
245
rp2_rmw_set(struct rp2_uart_port * up,int reg,u32 val)246 static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
247 {
248 rp2_rmw(up, reg, 0, val);
249 }
250
rp2_mask_ch_irq(struct rp2_uart_port * up,int ch_num,int is_enabled)251 static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
252 int is_enabled)
253 {
254 unsigned long flags, irq_mask;
255
256 spin_lock_irqsave(&up->card->card_lock, flags);
257
258 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
259 if (is_enabled)
260 irq_mask &= ~BIT(ch_num);
261 else
262 irq_mask |= BIT(ch_num);
263 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
264
265 spin_unlock_irqrestore(&up->card->card_lock, flags);
266 }
267
rp2_uart_tx_empty(struct uart_port * port)268 static unsigned int rp2_uart_tx_empty(struct uart_port *port)
269 {
270 struct rp2_uart_port *up = port_to_up(port);
271 unsigned long tx_fifo_bytes, flags;
272
273 /*
274 * This should probably check the transmitter, not the FIFO.
275 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
276 * enabled.
277 */
278 uart_port_lock_irqsave(&up->port, &flags);
279 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
280 uart_port_unlock_irqrestore(&up->port, flags);
281
282 return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
283 }
284
rp2_uart_get_mctrl(struct uart_port * port)285 static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
286 {
287 struct rp2_uart_port *up = port_to_up(port);
288 u32 status;
289
290 status = readl(up->base + RP2_CHAN_STAT);
291 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
292 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
293 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
294 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
295 }
296
rp2_uart_set_mctrl(struct uart_port * port,unsigned int mctrl)297 static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
298 {
299 rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
300 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
301 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
302 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
303 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
304 }
305
rp2_uart_start_tx(struct uart_port * port)306 static void rp2_uart_start_tx(struct uart_port *port)
307 {
308 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
309 }
310
rp2_uart_stop_tx(struct uart_port * port)311 static void rp2_uart_stop_tx(struct uart_port *port)
312 {
313 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
314 }
315
rp2_uart_stop_rx(struct uart_port * port)316 static void rp2_uart_stop_rx(struct uart_port *port)
317 {
318 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
319 }
320
rp2_uart_break_ctl(struct uart_port * port,int break_state)321 static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
322 {
323 unsigned long flags;
324
325 uart_port_lock_irqsave(port, &flags);
326 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
327 break_state ? RP2_TXRX_CTL_BREAK_m : 0);
328 uart_port_unlock_irqrestore(port, flags);
329 }
330
rp2_uart_enable_ms(struct uart_port * port)331 static void rp2_uart_enable_ms(struct uart_port *port)
332 {
333 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
334 }
335
__rp2_uart_set_termios(struct rp2_uart_port * up,unsigned long cfl,unsigned long ifl,unsigned int baud_div)336 static void __rp2_uart_set_termios(struct rp2_uart_port *up,
337 unsigned long cfl,
338 unsigned long ifl,
339 unsigned int baud_div)
340 {
341 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
342 writew(baud_div - 1, up->base + RP2_BAUD);
343
344 /* data bits and stop bits */
345 rp2_rmw(up, RP2_UART_CTL,
346 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
347 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
348 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
349 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
350 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
351 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
352
353 /* parity and hardware flow control */
354 rp2_rmw(up, RP2_TXRX_CTL,
355 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
356 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
357 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
358 RP2_TXRX_CTL_CTSFLOW_m,
359 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
360 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
361 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
362 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
363 RP2_TXRX_CTL_CTSFLOW_m) : 0));
364
365 /* XON/XOFF software flow control */
366 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
367 up->ucode + RP2_TX_SWFLOW);
368 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
369 up->ucode + RP2_RX_SWFLOW);
370 }
371
rp2_uart_set_termios(struct uart_port * port,struct ktermios * new,const struct ktermios * old)372 static void rp2_uart_set_termios(struct uart_port *port, struct ktermios *new,
373 const struct ktermios *old)
374 {
375 struct rp2_uart_port *up = port_to_up(port);
376 unsigned long flags;
377 unsigned int baud, baud_div;
378
379 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
380 baud_div = uart_get_divisor(port, baud);
381
382 if (tty_termios_baud_rate(new))
383 tty_termios_encode_baud_rate(new, baud, baud);
384
385 uart_port_lock_irqsave(port, &flags);
386
387 /* ignore all characters if CREAD is not set */
388 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
389
390 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
391 uart_update_timeout(port, new->c_cflag, baud);
392
393 uart_port_unlock_irqrestore(port, flags);
394 }
395
rp2_rx_chars(struct rp2_uart_port * up)396 static void rp2_rx_chars(struct rp2_uart_port *up)
397 {
398 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
399 struct tty_port *port = &up->port.state->port;
400
401 for (; bytes != 0; bytes--) {
402 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
403 u8 ch = byte & 0xff;
404
405 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
406 if (!uart_handle_sysrq_char(&up->port, ch))
407 uart_insert_char(&up->port, byte, 0, ch,
408 TTY_NORMAL);
409 } else {
410 u8 flag = TTY_NORMAL;
411
412 if (byte & RP2_DATA_BYTE_BREAK_m)
413 flag = TTY_BREAK;
414 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
415 flag = TTY_FRAME;
416 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
417 flag = TTY_PARITY;
418 uart_insert_char(&up->port, byte,
419 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
420 }
421 up->port.icount.rx++;
422 }
423
424 tty_flip_buffer_push(port);
425 }
426
rp2_tx_chars(struct rp2_uart_port * up)427 static void rp2_tx_chars(struct rp2_uart_port *up)
428 {
429 u8 ch;
430
431 uart_port_tx_limited(&up->port, ch,
432 FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT),
433 true,
434 writeb(ch, up->base + RP2_DATA_BYTE),
435 ({}));
436 }
437
rp2_ch_interrupt(struct rp2_uart_port * up)438 static void rp2_ch_interrupt(struct rp2_uart_port *up)
439 {
440 u32 status;
441
442 uart_port_lock(&up->port);
443
444 /*
445 * The IRQ status bits are clear-on-write. Other status bits in
446 * this register aren't, so it's harmless to write to them.
447 */
448 status = readl(up->base + RP2_CHAN_STAT);
449 writel(status, up->base + RP2_CHAN_STAT);
450
451 if (status & RP2_CHAN_STAT_RXDATA_m)
452 rp2_rx_chars(up);
453 if (status & RP2_CHAN_STAT_TXEMPTY_m)
454 rp2_tx_chars(up);
455 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
456 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
457
458 uart_port_unlock(&up->port);
459 }
460
rp2_asic_interrupt(struct rp2_card * card,unsigned int asic_id)461 static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
462 {
463 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
464 int ch, handled = 0;
465 unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
466 ~readl(base + RP2_CH_IRQ_MASK);
467
468 for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
469 rp2_ch_interrupt(&card->ports[ch]);
470 handled++;
471 }
472 return handled;
473 }
474
rp2_uart_interrupt(int irq,void * dev_id)475 static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
476 {
477 struct rp2_card *card = dev_id;
478 int handled;
479
480 handled = rp2_asic_interrupt(card, 0);
481 if (card->n_ports >= PORTS_PER_ASIC)
482 handled += rp2_asic_interrupt(card, 1);
483
484 return handled ? IRQ_HANDLED : IRQ_NONE;
485 }
486
rp2_flush_fifos(struct rp2_uart_port * up)487 static inline void rp2_flush_fifos(struct rp2_uart_port *up)
488 {
489 rp2_rmw_set(up, RP2_UART_CTL,
490 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
491 readl(up->base + RP2_UART_CTL);
492 udelay(10);
493 rp2_rmw_clr(up, RP2_UART_CTL,
494 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
495 }
496
rp2_uart_startup(struct uart_port * port)497 static int rp2_uart_startup(struct uart_port *port)
498 {
499 struct rp2_uart_port *up = port_to_up(port);
500
501 rp2_flush_fifos(up);
502 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
503 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
504 RP2_TXRX_CTL_RX_TRIG_1);
505 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
506 rp2_mask_ch_irq(up, up->idx, 1);
507
508 return 0;
509 }
510
rp2_uart_shutdown(struct uart_port * port)511 static void rp2_uart_shutdown(struct uart_port *port)
512 {
513 struct rp2_uart_port *up = port_to_up(port);
514 unsigned long flags;
515
516 rp2_uart_break_ctl(port, 0);
517
518 uart_port_lock_irqsave(port, &flags);
519 rp2_mask_ch_irq(up, up->idx, 0);
520 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
521 uart_port_unlock_irqrestore(port, flags);
522 }
523
rp2_uart_type(struct uart_port * port)524 static const char *rp2_uart_type(struct uart_port *port)
525 {
526 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
527 }
528
rp2_uart_release_port(struct uart_port * port)529 static void rp2_uart_release_port(struct uart_port *port)
530 {
531 /* Nothing to release ... */
532 }
533
rp2_uart_request_port(struct uart_port * port)534 static int rp2_uart_request_port(struct uart_port *port)
535 {
536 /* UARTs always present */
537 return 0;
538 }
539
rp2_uart_config_port(struct uart_port * port,int flags)540 static void rp2_uart_config_port(struct uart_port *port, int flags)
541 {
542 if (flags & UART_CONFIG_TYPE)
543 port->type = PORT_RP2;
544 }
545
rp2_uart_verify_port(struct uart_port * port,struct serial_struct * ser)546 static int rp2_uart_verify_port(struct uart_port *port,
547 struct serial_struct *ser)
548 {
549 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
550 return -EINVAL;
551
552 return 0;
553 }
554
555 static const struct uart_ops rp2_uart_ops = {
556 .tx_empty = rp2_uart_tx_empty,
557 .set_mctrl = rp2_uart_set_mctrl,
558 .get_mctrl = rp2_uart_get_mctrl,
559 .stop_tx = rp2_uart_stop_tx,
560 .start_tx = rp2_uart_start_tx,
561 .stop_rx = rp2_uart_stop_rx,
562 .enable_ms = rp2_uart_enable_ms,
563 .break_ctl = rp2_uart_break_ctl,
564 .startup = rp2_uart_startup,
565 .shutdown = rp2_uart_shutdown,
566 .set_termios = rp2_uart_set_termios,
567 .type = rp2_uart_type,
568 .release_port = rp2_uart_release_port,
569 .request_port = rp2_uart_request_port,
570 .config_port = rp2_uart_config_port,
571 .verify_port = rp2_uart_verify_port,
572 };
573
rp2_reset_asic(struct rp2_card * card,unsigned int asic_id)574 static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
575 {
576 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
577 u32 clk_cfg;
578
579 writew(1, base + RP2_GLOBAL_CMD);
580 msleep(100);
581 readw(base + RP2_GLOBAL_CMD);
582 writel(0, base + RP2_CLK_PRESCALER);
583
584 /* TDM clock configuration */
585 clk_cfg = readw(base + RP2_ASIC_CFG);
586 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
587 writew(clk_cfg, base + RP2_ASIC_CFG);
588
589 /* IRQ routing */
590 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
591 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
592 }
593
rp2_init_card(struct rp2_card * card)594 static void rp2_init_card(struct rp2_card *card)
595 {
596 writel(4, card->bar0 + RP2_FPGA_CTL0);
597 writel(0, card->bar0 + RP2_FPGA_CTL1);
598
599 rp2_reset_asic(card, 0);
600 if (card->n_ports >= PORTS_PER_ASIC)
601 rp2_reset_asic(card, 1);
602
603 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
604 }
605
rp2_init_port(struct rp2_uart_port * up,const struct firmware * fw)606 static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
607 {
608 int i;
609
610 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
611 readl(up->base + RP2_UART_CTL);
612 udelay(1);
613
614 writel(0, up->base + RP2_TXRX_CTL);
615 writel(0, up->base + RP2_UART_CTL);
616 readl(up->base + RP2_UART_CTL);
617 udelay(1);
618
619 rp2_flush_fifos(up);
620
621 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
622 writeb(fw->data[i], up->ucode + i);
623
624 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
625 rp2_uart_set_mctrl(&up->port, 0);
626
627 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
628 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
629 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
630 rp2_rmw_set(up, RP2_TXRX_CTL,
631 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
632 }
633
rp2_remove_ports(struct rp2_card * card)634 static void rp2_remove_ports(struct rp2_card *card)
635 {
636 int i;
637
638 for (i = 0; i < card->initialized_ports; i++)
639 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
640 card->initialized_ports = 0;
641 }
642
rp2_load_firmware(struct rp2_card * card,const struct firmware * fw)643 static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
644 {
645 resource_size_t phys_base;
646 int i, rc = 0;
647
648 phys_base = pci_resource_start(card->pdev, 1);
649
650 for (i = 0; i < card->n_ports; i++) {
651 struct rp2_uart_port *rp = &card->ports[i];
652 struct uart_port *p;
653 int j = (unsigned)i % PORTS_PER_ASIC;
654
655 rp->asic_base = card->bar1;
656 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
657 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
658 rp->card = card;
659 rp->idx = j;
660
661 p = &rp->port;
662 p->line = card->minor_start + i;
663 p->dev = &card->pdev->dev;
664 p->type = PORT_RP2;
665 p->iotype = UPIO_MEM32;
666 p->uartclk = UART_CLOCK;
667 p->regshift = 2;
668 p->fifosize = FIFO_SIZE;
669 p->ops = &rp2_uart_ops;
670 p->irq = card->pdev->irq;
671 p->membase = rp->base;
672 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
673
674 if (i >= PORTS_PER_ASIC) {
675 rp->asic_base += RP2_ASIC_SPACING;
676 rp->base += RP2_ASIC_SPACING;
677 rp->ucode += RP2_ASIC_SPACING;
678 p->mapbase += RP2_ASIC_SPACING;
679 }
680
681 rp2_init_port(rp, fw);
682 rc = uart_add_one_port(&rp2_uart_driver, p);
683 if (rc) {
684 dev_err(&card->pdev->dev,
685 "error registering port %d: %d\n", i, rc);
686 rp2_remove_ports(card);
687 break;
688 }
689 card->initialized_ports++;
690 }
691
692 return rc;
693 }
694
rp2_probe(struct pci_dev * pdev,const struct pci_device_id * id)695 static int rp2_probe(struct pci_dev *pdev,
696 const struct pci_device_id *id)
697 {
698 const struct firmware *fw;
699 struct rp2_card *card;
700 struct rp2_uart_port *ports;
701 void __iomem * const *bars;
702 int rc;
703
704 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
705 if (!card)
706 return -ENOMEM;
707 pci_set_drvdata(pdev, card);
708 spin_lock_init(&card->card_lock);
709
710 rc = pcim_enable_device(pdev);
711 if (rc)
712 return rc;
713
714 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
715 if (rc)
716 return rc;
717
718 bars = pcim_iomap_table(pdev);
719 card->bar0 = bars[0];
720 card->bar1 = bars[1];
721 card->pdev = pdev;
722
723 rp2_decode_cap(id, &card->n_ports, &card->smpte);
724 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
725
726 card->minor_start = rp2_alloc_ports(card->n_ports);
727 if (card->minor_start < 0) {
728 dev_err(&pdev->dev,
729 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
730 return -EINVAL;
731 }
732
733 rp2_init_card(card);
734
735 ports = devm_kcalloc(&pdev->dev, card->n_ports, sizeof(*ports),
736 GFP_KERNEL);
737 if (!ports)
738 return -ENOMEM;
739 card->ports = ports;
740
741 rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
742 if (rc < 0) {
743 dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
744 RP2_FW_NAME);
745 return rc;
746 }
747
748 rc = rp2_load_firmware(card, fw);
749
750 release_firmware(fw);
751 if (rc < 0)
752 return rc;
753
754 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
755 IRQF_SHARED, DRV_NAME, card);
756 if (rc)
757 return rc;
758
759 return 0;
760 }
761
rp2_remove(struct pci_dev * pdev)762 static void rp2_remove(struct pci_dev *pdev)
763 {
764 struct rp2_card *card = pci_get_drvdata(pdev);
765
766 rp2_remove_ports(card);
767 }
768
769 static const struct pci_device_id rp2_pci_tbl[] = {
770
771 /* RocketPort INFINITY cards */
772
773 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
774 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
775 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
776 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
777 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
778 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
779 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
780 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
781 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
782 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
783 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
784 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
785 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
786 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
787 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
788 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
789 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
790
791 /* RocketPort EXPRESS cards */
792
793 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
794 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
795 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
796 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
797 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
798 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
799 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
800 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
801 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
802 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
803 { }
804 };
805 MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
806
807 static struct pci_driver rp2_pci_driver = {
808 .name = DRV_NAME,
809 .id_table = rp2_pci_tbl,
810 .probe = rp2_probe,
811 .remove = rp2_remove,
812 };
813
rp2_uart_init(void)814 static int __init rp2_uart_init(void)
815 {
816 int rc;
817
818 rc = uart_register_driver(&rp2_uart_driver);
819 if (rc)
820 return rc;
821
822 rc = pci_register_driver(&rp2_pci_driver);
823 if (rc) {
824 uart_unregister_driver(&rp2_uart_driver);
825 return rc;
826 }
827
828 return 0;
829 }
830
rp2_uart_exit(void)831 static void __exit rp2_uart_exit(void)
832 {
833 pci_unregister_driver(&rp2_pci_driver);
834 uart_unregister_driver(&rp2_uart_driver);
835 }
836
837 module_init(rp2_uart_init);
838 module_exit(rp2_uart_exit);
839
840 MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
841 MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
842 MODULE_LICENSE("GPL v2");
843 MODULE_FIRMWARE(RP2_FW_NAME);
844