1 /*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21 /*
22 * Copyright 2006 Sun Microsystems, Inc. All rights reserved.
23 * Use is subject to license terms.
24 */
25
26 /*
27 * Given a file containing sections with stabs data, convert the stabs data to
28 * CTF data, and replace the stabs sections with a CTF section.
29 */
30
31 #include <stdio.h>
32 #include <stdlib.h>
33 #include <unistd.h>
34 #include <signal.h>
35 #include <string.h>
36 #include <fcntl.h>
37 #include <libgen.h>
38 #include <errno.h>
39 #include <assert.h>
40
41 #include "ctftools.h"
42 #include "memory.h"
43
44 const char *progname;
45 int debug_level = DEBUG_LEVEL;
46
47 static const char *infile = NULL;
48 static const char *outfile = NULL;
49 static int dynsym;
50
51 static void
usage(void)52 usage(void)
53 {
54 (void) fprintf(stderr,
55 "Usage: %s [-is] -l label | -L labelenv [-o outfile] object_file\n"
56 "\n"
57 " Note: if -L labelenv is specified and labelenv is not set in\n"
58 " the environment, a default value is used.\n",
59 progname);
60 }
61
62 static void
terminate_cleanup(void)63 terminate_cleanup(void)
64 {
65 if (!outfile) {
66 fprintf(stderr, "Removing %s\n", infile);
67 unlink(infile);
68 }
69 }
70
71 static void
handle_sig(int sig)72 handle_sig(int sig)
73 {
74 terminate("Caught signal %d - exiting\n", sig);
75 }
76
77 static int
file_read(tdata_t * td,const char * filename,int ignore_non_c)78 file_read(tdata_t *td, const char *filename, int ignore_non_c)
79 {
80 typedef int (*reader_f)(tdata_t *, Elf *, const char *);
81 static const reader_f readers[] = {
82 stabs_read,
83 dw_read,
84 NULL
85 };
86
87 source_types_t source_types;
88 Elf *elf;
89 int i, rc, fd;
90
91 if ((fd = open(filename, O_RDONLY)) < 0)
92 terminate("failed to open %s", filename);
93
94 (void) elf_version(EV_CURRENT);
95
96 if ((elf = elf_begin(fd, ELF_C_READ, NULL)) == NULL) {
97 close(fd);
98 terminate("failed to read %s: %s\n", filename,
99 elf_errmsg(-1));
100 }
101
102 source_types = built_source_types(elf, filename);
103
104 if ((source_types == SOURCE_NONE || (source_types & SOURCE_UNKNOWN)) &&
105 ignore_non_c) {
106 debug(1, "Ignoring file %s from unknown sources\n", filename);
107 exit(0);
108 }
109
110 for (i = 0; readers[i] != NULL; i++) {
111 if ((rc = readers[i](td, elf, filename)) == 0)
112 break;
113
114 assert(rc < 0 && errno == ENOENT);
115 }
116
117 if (readers[i] == NULL) {
118 /*
119 * None of the readers found compatible type data.
120 */
121
122 if (findelfsecidx(elf, filename, ".debug") >= 0) {
123 terminate("%s: DWARF version 1 is not supported\n",
124 filename);
125 }
126
127 if (!(source_types & SOURCE_C) && ignore_non_c) {
128 debug(1, "Ignoring file %s not built from C sources\n",
129 filename);
130 exit(0);
131 }
132
133 rc = 0;
134 } else {
135 rc = 1;
136 }
137
138 (void) elf_end(elf);
139 (void) close(fd);
140
141 return (rc);
142 }
143
144 int
main(int argc,char ** argv)145 main(int argc, char **argv)
146 {
147 tdata_t *filetd, *mstrtd;
148 char *label = NULL;
149 char *altexec;
150 int verbose = 0;
151 int ignore_non_c = 0;
152 int c;
153
154 sighold(SIGINT);
155 sighold(SIGQUIT);
156 sighold(SIGTERM);
157
158 progname = basename(argv[0]);
159
160 ctf_altexec("CTFCONVERT_ALTEXEC", argc, argv);
161
162 if (getenv("CTFCONVERT_DEBUG_LEVEL"))
163 debug_level = atoi(getenv("CTFCONVERT_DEBUG_LEVEL"));
164 if (getenv("CTFCONVERT_DEBUG_PARSE"))
165 debug_parse = atoi(getenv("CTFCONVERT_DEBUG_PARSE"));
166
167 if ((altexec = getenv("CTFCONVERT_ALTEXEC")) != NULL) {
168 (void) unsetenv("CTFCONVERT_ALTEXEC");
169 (void) execv(altexec, argv);
170 (void) fprintf(stderr, "ctfconvert altexec failed to "
171 "run %s: %s\n", altexec, strerror(errno));
172 }
173
174 while ((c = getopt(argc, argv, ":l:L:o:givs")) != EOF) {
175 switch (c) {
176 case 'l':
177 label = optarg;
178 break;
179 case 'L':
180 if ((label = getenv(optarg)) == NULL)
181 label = CTF_DEFAULT_LABEL;
182 break;
183 case 'o':
184 outfile = optarg;
185 break;
186 case 's':
187 dynsym = CTF_USE_DYNSYM;
188 break;
189 case 'i':
190 ignore_non_c = 1;
191 break;
192 case 'v':
193 verbose = 1;
194 break;
195 default:
196 usage();
197 exit(2);
198 }
199 }
200
201 if (argc - optind != 1 || label == NULL) {
202 usage();
203 exit(2);
204 }
205
206 infile = argv[optind];
207 if (access(infile, R_OK) != 0)
208 terminate("Can't access %s", infile);
209
210 /*
211 * Upon receipt of a signal, we want to clean up and exit. Our
212 * primary goal during cleanup is to restore the system to a state
213 * such that a subsequent make will eventually cause this command to
214 * be re-run. If we remove the input file (which we do if we get a
215 * signal and the user didn't specify a separate output file), make
216 * will need to rebuild the input file, and will then need to re-run
217 * ctfconvert, which is what we want.
218 */
219 set_terminate_cleanup(terminate_cleanup);
220
221 sigset(SIGINT, handle_sig);
222 sigset(SIGQUIT, handle_sig);
223 sigset(SIGTERM, handle_sig);
224
225 filetd = tdata_new();
226
227 if (!file_read(filetd, infile, ignore_non_c))
228 terminate("%s doesn't have type data to convert\n", infile);
229
230 if (verbose)
231 iidesc_stats(filetd->td_iihash);
232
233 mstrtd = tdata_new();
234 merge_into_master(filetd, mstrtd, NULL, 1);
235
236 tdata_label_add(mstrtd, label, CTF_LABEL_LASTIDX);
237
238 /*
239 * If the user supplied an output file that is different from the
240 * input file, write directly to the output file. Otherwise, write
241 * to a temporary file, and replace the input file when we're done.
242 */
243 if (outfile && strcmp(infile, outfile) != 0) {
244 write_ctf(mstrtd, infile, outfile, dynsym);
245 } else {
246 char *tmpname = mktmpname(infile, ".ctf");
247
248 write_ctf(mstrtd, infile, tmpname, dynsym);
249 if (rename(tmpname, infile) != 0)
250 terminate("Couldn't rename temp file %s", tmpname);
251 free(tmpname);
252 }
253
254 return (0);
255 }
256