xref: /titanic_44/usr/src/psm/promif/ieee1275/common/prom_env.c (revision fea9cb91bd8e12d84069b4dab1268363668b4bff)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  * Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
24  * Use is subject to license terms.
25  */
26 
27 #pragma ident	"%Z%%M%	%I%	%E% SMI"
28 
29 #include <sys/promif.h>
30 #include <sys/promimpl.h>
31 
32 /*
33  * The functions in this file are used to control the pre- and post-processing
34  * functions that bracket calls to the OBP CIF handler.  One set, promif_preprom
35  * and promif_postprom, are provided for general kernel use.  The other set,
36  * promif_preout and promif_postout, are used by the power management subsystem
37  * to ensure that the framebuffer is active when PROM functions that interact
38  * with the console are invoked.
39  *
40  * In some cases, the operation of these functions must be suppressed.  As such,
41  * this file provides the ability to suspend and resume use of both sets
42  * simultaneously.  Complicating matters is the fact that both current uses of
43  * the pre- and post-processor suspension and resume facilities, kmdb and CPR
44  * may be used simultaneously.  We therefore support normal operation and two
45  * levels of suspension.  The pre- and post-processing functions are only
46  * called during normal operation.  With each suspension request, this
47  * subsystem enters the first suspension level, or passes to the second
48  * suspension level, as appropriate.  Resume calls decrement the suspension
49  * level.  Only two nested suspensions are supported.
50  *
51  * As indicated above, the two current users are CPR and kmdb.  CPR must prevent
52  * kernel accesses outside of the nucleus page during the late stages of system
53  * suspension and during the early stages of system resumption.  As such, the
54  * PM-related processing must not occur during these times.
55  *
56  * The platform-specific portions of kmdb live in the platmods, and thus execute
57  * in the linker environment of the platmods.  That is, any promif calls they
58  * may make are executed by the kernel copies of those functions, rather than
59  * the versions included with kmdb.  The only difference between the two copies
60  * being the nonuse of the pre- and post-processing functions in the kmdb
61  * versions, we must ensure that these functions are not used when the kmdb
62  * platmod code executes.  Accordingly, kmdb disables the pre- and post-
63  * processing functions via the KDI prior to passing control to the platmod
64  * debugger code.
65  */
66 
67 static int promif_suspendlevel;
68 
69 static promif_preprom_f *promif_preprom_fn;
70 static promif_postprom_f *promif_postprom_fn;
71 
72 /*
73  * When this is set, the PROM output functions attempt to
74  * redirect output to the kernel terminal emulator.
75  */
76 promif_redir_t promif_redirect;
77 promif_redir_arg_t promif_redirect_arg;
78 
79 /*
80  * Sets new callback and argument, returns previous callback.
81  */
82 void
prom_set_stdout_redirect(promif_redir_t new_fn,promif_redir_arg_t opaque_arg)83 prom_set_stdout_redirect(promif_redir_t new_fn, promif_redir_arg_t opaque_arg)
84 {
85 	promif_redirect_arg = opaque_arg;
86 	promif_redirect = new_fn;
87 }
88 
89 void
prom_set_preprom(promif_preprom_f * new)90 prom_set_preprom(promif_preprom_f *new)
91 {
92 	promif_preprom_fn = new;
93 }
94 
95 void
prom_set_postprom(promif_postprom_f * new)96 prom_set_postprom(promif_postprom_f *new)
97 {
98 	promif_postprom_fn = new;
99 }
100 
101 void
promif_preprom(void)102 promif_preprom(void)
103 {
104 	if (promif_suspendlevel == 0 && promif_preprom_fn != NULL)
105 		promif_preprom_fn();
106 }
107 
108 void
promif_postprom(void)109 promif_postprom(void)
110 {
111 	if (promif_suspendlevel == 0 && promif_postprom_fn != NULL)
112 		promif_postprom_fn();
113 }
114 
115 /*
116  * The reader will note that the layout and calling conventions of the
117  * prom_preout and prom_postout functions differ from the prom_preprom and
118  * prom_postprom functions, above.  At the time the preout and postout
119  * functions are initialized, kernel startup is well underway.  There exists
120  * a race condition whereby a PROM call may begin before preout has been
121  * initialized, and may end after postout has been initialized.  In such
122  * cases, there will be a call to postout without a corresponding preout
123  * call.  The preprom and postprom calls above are initialized early enough
124  * that this race condition does not occur.
125  *
126  * To avoid the race condition, the preout/postout functions are designed
127  * such that the initialization is atomic.  Further, the preout call returns
128  * a data structure that includes a pointer to the postout function that
129  * corresponds to the invoked preout function.  This ensures that the preout
130  * and postout functions will only be used as a matched set.
131  */
132 
133 static void
null_outfunc(void)134 null_outfunc(void)
135 {
136 }
137 
138 static promif_owrap_t nullwrapper =
139 {
140 	null_outfunc,
141 	null_outfunc
142 };
143 
144 static promif_owrap_t *wrapper = &nullwrapper;
145 static promif_owrap_t pmwrapper;
146 
147 promif_owrap_t
promif_preout(void)148 *promif_preout(void)
149 {
150 	promif_owrap_t *ow;
151 
152 	if (promif_suspendlevel > 0)
153 		return (&nullwrapper);
154 
155 	ow = wrapper;
156 	if (ow->preout != NULL)
157 		(ow->preout)();
158 	return (ow);
159 }
160 
161 void
promif_postout(promif_owrap_t * ow)162 promif_postout(promif_owrap_t *ow)
163 {
164 	if (ow->postout != NULL)
165 		(ow->postout)();
166 }
167 
168 void
prom_set_outfuncs(void (* pref)(void),void (* postf)(void))169 prom_set_outfuncs(void (*pref)(void), void (*postf)(void))
170 {
171 	pmwrapper.preout = pref;
172 	pmwrapper.postout = postf;
173 	wrapper = &pmwrapper;
174 }
175 
176 void
prom_suspend_prepost(void)177 prom_suspend_prepost(void)
178 {
179 	ASSERT(promif_suspendlevel < 2);
180 
181 	promif_suspendlevel++;
182 }
183 
184 void
prom_resume_prepost(void)185 prom_resume_prepost(void)
186 {
187 	ASSERT(promif_suspendlevel >= 0);
188 
189 	promif_suspendlevel--;
190 }
191